CONTENTS INTRODUCTION ROCHESTER HEAD OFFICE AND TRADE COUNTER LONDON OFFICE AND SHOWROOM D SECTION HINGES

Transcription

1

2 CONTENTS INTRODUCTION ROCHESTER HEAD OFFICE AND TRADE COUNTER LONDON OFFICE AND SHOWROOM D SECTION HINGES A SECTION LEVER HANDLES KNOB FURNITURE CYLINDER ROSES BATHROOM/WC TURNS AND RELEASES B SECTION PULL HANDLES BACKPLATE SYSTEM DOOR PULLS PUSH PLATES KICKING PLATES C SECTION DOOR STOPS COAT HOOKS CYLINDER PULLS FLUSH PULLS L DESIGN DEE HANDLES T DESIGN DEE HANDLES F DESIGN DEE HANDLES CUPBOARD KNOBS DOOR EDGE PULLS E SECTION CYLINDERS MODULAR LOCK CASES NARROW STILE LOCK CASES HEAVY DUTY LOCK CASES HORIZONTAL LOCK CASES F SECTION OVERHEAD DOOR CLOSERS TRACK ARM DOOR CLOSERS ELECTRO-MAGNETIC DOOR CLOSERS CONCEALED DOOR CLOSERS UNDERFLOOR DOOR CLOSERS PIVOTS DOOR SELECTORS DOOR STAYS MAGNETIC DOOR HOLDERS G SECTION EMERGENCY EXIT HARDWARE TOUCH BAR PANIC HARDWARE CONCEALED BOLTS SURFACE BOLTS

3 CONTENTS H SECTION DOOR INFORMATION SIGNAGE J SECTION WASHROOM EQUIPMENT BATHROOM/WC FITTINGS DISABLED BATHROOM/WC FITTINGS K SECTION ACCESS CONTROL R SECTION PORTHOLE VISION FRAMES DOOR SEALS AUTOMATIC DROPSEALS S SECTION FIXINGS T SECTION ALPHA NUMERIC INDEX L SECTION ENTRANCE DOOR FITTINGS M SECTION GLASS FITTINGS N SECTION LIGHT SWITCHES AND SOCKETS P SECTION LOW ENERGY OVERHEAD AUTOMATIC DOOR OPERATORS LOW ENERGY UNDERFLOOR AUTOMATIC DOOR OPERATORS

4 I touch and I understand I hear and I react I see and I remember I speak and I use

5 INTRODUCTION Since launched in 1991, Fusion Architectural Hardware has evolved into a comprehensive and co-ordinated range of quality products designed for use in today s demanding buildings. By utilising the latest manufacturing technology, we have been able to introduce new and innovative designs to the range, which are available in both Stainless Steel and the more traditional Polished Bronze finishes. Where applicable, items are shown with their CEN standard performance number and reference is also made to Certfire Approval which, along with CE marking, is having an increasing influence over the selection and application of door hardware. I The Fusion range is available exclusively through Monaghan Group Companies within the United Kingdom and is supported by extensive stocks, free technical support and a specification/scheduling service from our qualified staff at no cost to you, our customer.

6 JOHN PLANCK LTD Maritime Close Medway Tunnel ROCHESTER HEAD OFFICE AND TRADE COUNTER To A2 Grain Enterprise Close Anthony's Way MEDWAY CITY ESTATE George Summers Close We are here Southern House Anthony s Way Medway City Estate Strood Rochester Kent ME2 4DN t +44 (0) f +44 (0) e [email protected] w A228 Medway City Estate Medway Tunnel River Medway Gillingham Northern Link II A2 Anthony's Way We are here Gillingham Chatham A2

7 JOHN PLANCK LTD Kings Cross Station LONDON OFFICE AND SHOWROOM Kings Cross Road Bowling Green Lane Farringdon Road Clerkenwell Green Aylesbury Street Clerkenwell Road Sekforde Street St John St We are here Goswell Road Haywards Place Haywards Place Clerkenwell Green London EC1R 0EQ t +44 (0) f +44 (0) e [email protected] w III Farringdon Underground Station Blackfriars Station

8 GLOSSARY FINISHES CLEANING AND MAINTENANCE HANDING DIAGRAMS SSS - Satin Stainless Steel PSS - Polished Stainless Steel PB - Polished Brass (Unlacquered) PBL - Polished Brass (Lacquered) PBZ - Polished Bronze (Unlacquered) PBZL - Polished Bronze (Lacquered) GSS - Patinised Stainless Steel PAA - Polished Anodised Aluminium SAA - Satin Anodised Aluminium SSSP - Satin Stainless Steel Plated PSSP - Polished Stainless Steel Plated PBP - Polished Brass Plated PBZP - Polished Bronze Plated SCP - Satin Chrome Plated PCP - Polished Chrome Plated SNP - Satin Nickel Plated PNP - Polished Nickel Plated PGP - Polished Gold Plated EPCS - Epoxy Powder Coated Silver SZP - Satin Zinc Plated BZP - Bright Zinc Plated BRS - Self Colour Brass SE - Silver Enamel WE - White Enamel CC - Colour Coated EG - Electro Galvanised PBPVD - Polished Brass (PVD Coated) PBZPVD - Polished Bronze (PVD Coated) l l l l l Stainless Steel Grade 316 Wipe clean with soft cloth using non-abrasive weak detergent. Brass Grade CZ121 Alloy We recommend that only unlacquered products are used on public buildings and any other situations of medium to high traffic. Clean with a non-abrasive agent to retain polished finish. Natural patinisation will occur if left uncleaned. Bronze Grade PB102 Alloy We recommend that only unlacquered products are used on public buildings and any other situations of medium to high traffic. Clean with a non-abrasive agent to retain polished finish. Natural patinisation will occur if left uncleaned. PBL and PBZL Lacquered door furniture will deteriorate after a period of time, subject to amount of use, and can only be re-conditioned by stripping and re-polishing. PBPVD and PBZPVD Physical Vapor Deposition process, retains a polished finish that carrys a 25 year guarantee. Outside FIL Outside FOL Outside FIR Outside FOR Fusion Hardware Specifications Carry a 10 Year Guarantee All information and details in this catalogue are correct at time of going to press, however Monaghan Group reserves the right to change the products specifications without notice. IV Fusion is a Registered Trademark

9 ALPHABETICAL INDEX A Access Control K131 to K141 Activating Switches - Wall K137 - Bollard K137 Alphabetical Index V Armoured Door Loops K141 Ash Trays J125 to J126 Automatic Door Drop Seals R161 B Baby Change Station J125 Backplate System - Push Side B72 - Pull Side B74 - B75 - Signage B76 Bathroom/WC Fittings J126 to J128 Bell Pushes L143 Biometric Hand Reader K139 Blank Roses A33 Bolts - Automatic G118 - Flush G118 - G119 - Foot Operated G118 - Knob Slide G118 - G119 - Surface G118 - G119 Bottom Straps F109 Break Glass Box K140 C Cabinet Handles C82 Card Swipe K135 Centre Door Knobs L143 Cleaning & Maintenance IV Coat Hooks C80 Concealed - Door Closers F104 - F110 - Hinges D88 Cover Caps F109 Cubicle Deadbolt E97 Cupboard - Knobs A31 - C83 - Pulls C80 - C82 Cylinders E90 - E91 Cylinder - Pulls C81 - Roses A33 D Disabled - Bathroom/WC Fittings J129 - J130 - Toilet Door Lock E97 - Turns A33 Digital - Door Locks K141 Digital - Key Pads K134 Door - Closers F98 to F110 - Edge Pulls C83 - Knocker L143 - Pulls B75 - C81 - C83 - Seals R160 - R161 - Selectors F111 - Stops C79 - Viewers L143 Double Action Pivot Set F111 E Electro-magnetic - Door Closers F100 to F104 - F108 - Door Holders F112 - Locks K132 Electronic Locking System K136 Electro-Pneumatic Security Bolts K133 Electric Striking Plates K138 Emergency Exit Hardware G113 to G117 Emergency Release Door Stop F111 Entrance Door Fittings L142 - L143 Escutcheons A33 Exit Motion Sensor K139 F Falling Hinges D86 IV Fixings S162 Floor - Pivots F110 - Sockets G119 Flush - Pulls C81 - Ring Pulls C83 G Glass Door - Patch Fittings M144 to M149 - Panic Bolt G117 - Locking Bolts K133 - Rails M148 - M149 Glossary IV H Hand Drier Unit Handing Diagrams Hinges Horizontal Lock Cases Human Touch Sense Access Control J124 IV D84 to D88 E96 K139 I Indicator - Releases A33 - Turns A33 Introduction I K Key Switches Kicking Plates Knob Furniture K140 B77 A31 L Latches E92 - E94 - E95 - E96 Letters L143 Letter Plates L143 Letter Plate Tidies L143 Lever handles A1 to A29 Lift Off Hinges D86 Light Switches N150 to N153 Limiting Stay F111 Lock Cases E92 to E97 Locking Attachments G115 - G117 Low Energy Automatic Door Openers - Overhead P155 - P156 - Underfloor P157 M Maps N Narrow Stile Lockcases Numbers Numerical Index O Overhead Door Closers II - III E94 L143 T163 to T166 F98 to F104 P Panic Bolts G113 to G117 Panic Latches G113 to G117 Paper Towel Dispensers J124 Porthole Vision Frames R159 Power - Supply Units K140 - P157 - Transfer Hinges D87 Proximity Reader K135 Pull Handles B34 to B70 Push - Buttons K140 - Plates B72 - B77 R Rising Hinges Roller Catches Roses D86 E97 A33 - S162 S Sealing Compound F110 Service Lock E97 Signs B76 - H121 - H122 Sliding Door Lock Cases E97 Soap - Dispensers J124 - J128 - Holders J126 - Trays J126 Sockets G119 Spindles - Floor Springs F110 - Lever Handles S162 Symbols B76 - H121 - H122 T Threshold Strips R160 Toilet - Brush Holder J128 - Roll Holders J124 - J126 Top Centres F109 Towel - Holders J127 - Rails J127 - Shelves J127 Track Arm Door Closers F100 to F102 Turns A33 U Underfloor - Cavity Frames F110 - Door Closers F105 to F108 W Washroom Equipment Waste Bins J124 - J125 J125 V

10 A SECTION LEVER HANDLES KNOB FURNITURE CYLINDER ROSES BATHROOM/WC TURNS AND RELEASES A1

11 A0900 LEVER DESIGN A2

12 A0900 LEVER DESIGN HANDLES ON ROSES Cast Solid Section Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD A3 A Long x 65mm Projection o/a

13 A1000 LEVER DESIGN A4

14 A1000 LEVER DESIGN HANDLES ON ROSES Cast Solid Section Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD A5 A Long x 59mm Projection o/a

15 A0116 LEVER DESIGN A6

16 A0116 LEVER DESIGN HANDLES ON ROSES Solid Section 16mm Ø Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS PB PBZ GSS PAA PBL PBZL PBPVD PBZPVD Option Ball End Suffix Item Number BE A7 Radius = Diameter A Long x 56mm Projection o/a

17 A0119 LEVER DESIGN A8

18 A0119 LEVER DESIGN HANDLES ON ROSES Solid Section 19mm Ø Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS PB PBZ GSS PAA PBL PBZL PBPVD PBZPVD A9 Option Ball End Suffix Item Number BE Radius = Diameter A Long x 59 mm Projection o/a

19 A0200 A0300 A0400 LEVER DESIGN A10

20 A0200 A0300 A0400 LEVER DESIGN HANDLES ON ROSES A Cranked Down 142 Long x 56mm Projection o/a Solid Section 16mm Ø Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD A11 A Cranked to Door 142 Long x 56mm Projection o/a A Straight 142 Long x 56mm Projection o/a

21 A0516 A0519 LEVER DESIGN A12

22 A0516 A0519 LEVER DESIGN HANDLES ON ROSES Solid Section Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD A13 A mm Ø 140 Long x 56mm Projection o/a A mm Ø 140 Long x 59mm Projection o/a

23 A0616 A0619 LEVER DESIGNS A14

24 A0616 A0619 LEVER DESIGN HANDLES ON ROSES Solid Section Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD A15 A mm Ø 140 Long x 56mm Projection o/a A mm Ø 140 Long x 59mm Projection o/a

25 A0716 A0719 LEVER DESIGN A16

26 A0716 A0719 LEVER DESIGN HANDLES ON ROSES Solid Section Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Option Ball End Suffix Item Number BE A17 A mm Ø 125 Long x 56mm Projection o/a A mm Ø 125 Long x 59mm Projection o/a

27 A0800 LEVER DESIGN A18

28 A0800 LEVER DESIGN HANDLES ON ROSES Solid Section 19mm Ø Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD A19 A mm Ø 150 Long x 59mm Projection o/a

29 A0016 LEVER DESIGN A20

30 A0016 LEVER DESIGN HANDLES ON ROSES Solid Section 16mm Ø Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS PB PBZ GSS PAA PBL PBZL PBPVD PBZPVD A21 Option Ball End Suffix Item Number BE Radius = Diameter A mm Ø 127 Long x 56mm Projection o/a

31 A0019 LEVER DESIGN A22

32 A0019 LEVER DESIGN HANDLES ON ROSES Solid Section 19mm Ø Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS PB PBZ GSS PAA PBL PBZL PBPVD PBZPVD A23 Option Ball End Suffix Item Number BE Radius = Diameter A mm Ø 133 Long x 59mm Projection o/a

33 A1100 LEVER DESIGN A24

34 A1100 LEVER DESIGN HANDLES ON ROSES Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS GSS A25 A Long x 60mm Projection o/a

35 A1400 LEVER DESIGN A26

36 A1400 LEVER DESIGN HANDLES ON ROSES Solid Section 19mm Ø Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD A27 A Long x 59mm Projection o/a

37 A2000 LEVER DESIGN A28

38 A2000 LEVER DESIGN HANDLES ON ROSES Solid Section Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS GSS A29 A Long x 65 mm Projection o/a

39 A3750 A3850 A3950 KNOB DESIGNS A30

40 A3750 A3850 A3950 KNOB DESIGNS A3750* Knob Furniture to Operate 50 Ø x 65mm Projection o/a A3850* Knob Furniture to Operate 50 Ø x 45mm Projection o/a A3950* Knob Furniture to Operate 50 Ø x 75mm Projection o/a A37441 Fixed Knob to Pull 44 Ø x 54mm Projection o/a Bolt Fixing A38441 Fixed Knob to Pull 44 Ø x 36mm Projection o/a Bolt Fixing A39441 Fixed Knob to Pull 44 Ø x 64mm Projection o/a Bolt Fixing A31 A37321 Fixed Knob to Pull 32 Ø x 40mm Projection o/a Bolt Fixing A38321 Fixed Knob to Pull 32 Ø x 30mm Projection o/a Bolt Fixing A39321 Fixed Knob to Pull 32 Ø x 44mm Projection o/a Bolt Fixing A3750* A3850* A3950* Concealed Bolt Fixing Fusion Secure Spindle Suits Doors 40 to 55mm thick SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Suffix Item Number FD for Fixed Dead

41 TURNS RELEASES ROSES ESCUTCHEONS A32

42 A991 Fusion Turn A990 PC Euro Cylinder Rose TURNS RELEASES ROSES ESCUTCHEONS A992 Fusion Disabled Turn A990 OC Oval Cylinder Rose A993 Indicator Release A990 KC 22mm Round Cylinder Rose A33 A994 Blind Release A990 LK Lever Key Escutcheon A995 Fusion Indicator Turn A990 BL Blank Escutcheon SSS PSS PB PBZ GSS PAA PBL PBZL PBPVD PBZPVD Size 50 Ø x 5mm Projection Turns and Releases Supplied with 8mm Spindles A996 Fusion Escape Lever Turn Screw Fixing Supplied Standard Bolt Fixing Available as Option Suffix BT

43 B SECTION PULL HANDLES BACKPLATE SYSTEM DOOR PULLS PUSH PLATES KICKING PLATES B34

44 B00 SERIES PULL HANDLES B35

45 B00 SERIES 16MM Ø PULL HANDLES Projection Radius = Diameter c/c Bolt Through Fixing (up to 63mm Thick Doors) B00161B - 200mm c/c x 55mm Projection B00161C - 300mm c/c x 55mm Projection B00161D - 400mm c/c x 55mm Projection B00161E - 600mm c/c x 55mm Projection Concealed Face Fixing on Roses B00162B - 200mm c/c x 60mm Projection B00162C - 300mm c/c x 60mm Projection B00162D - 400mm c/c x 60mm Projection B00162E - 600mm c/c x 60mm Projection B36 Back to Back Fixing (Timber) B00164B - 200mm c/c x 55mm Projection B00164C - 300mm c/c x 55mm Projection B00164D - 400mm c/c x 55mm Projection B00164E - 600mm c/c x 55mm Projection Also Available for Glass Fixing SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Solid Section See page A20 for Matching Lever Handles

46 B00 SERIES 19MM Ø PULL HANDLES Bolt Through Fixing (up to 63mm Thick Doors) B00191B - 200mm c/c x 60mm Projection B00191C - 300mm c/c x 60mm Projection B00191D - 400mm c/c x 60mm Projection B00191E - 600mm c/c x 60mm Projection Projection Concealed Face Fixing on Roses B00192B - 200mm c/c x 65mm Projection B00192C - 300mm c/c x 65mm Projection B00192D - 400mm c/c x 65mm Projection B00192E - 600mm c/c x 65mm Projection B37 Radius = Diameter c/c Back to Back Fixing (Timber) B00194B - 200mm c/c x 60mm Projection B00194C - 300mm c/c x 60mm Projection B00194D - 400mm c/c x 60mm Projection B00194E - 600mm c/c x 60mm Projection Also Available for Glass Fixing SSS PSS PB PBZ GSS PAA PBL PBZL PBPVD PBZPVD Solid Section See page A22 for Matching Lever Handles

47 B00 SERIES 25MM Ø PULL HANDLES Projection Radius = Diameter c/c Bolt Through Fixing (up to 63mm Thick Doors) B00251B - 200mm c/c x 75mm Projection B00251C - 300mm c/c x 75mm Projection B00251D - 400mm c/c x 75mm Projection B00251E - 600mm c/c x 75mm Projection Concealed Face Fixing on Roses B00252B - 200mm c/c x 80mm Projection B00252C - 300mm c/c x 80mm Projection B00252D - 400mm c/c x 80mm Projection B00252E - 600mm c/c x 80mm Projection B38 Back to Back Fixing (Timber) B00254B - 200mm c/c x 75mm Projection B00254C - 300mm c/c x 75mm Projection B00254D - 400mm c/c x 75mm Projection B00254E - 600mm c/c x 75mm Projection Also Available for Glass Fixing SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Solid Section See page A22 for Matching Lever Handles

48 B01 SERIES PULL HANDLES B39

49 B01 SERIES 16MM Ø PULL HANDLES Projection 16mm Ø Bolt Through Fixing (up to 63mm Thick) B01161B - 200mm c/c x 66mm Projection B01161C - 300mm c/c x 66mm Projection B01161D - 400mm c/c x 66mm Projection B01161E - 600mm c/c x 66mm Projection c/c 16mm Ø Concealed Face Fixing on Roses B01162B - 200mm c/c x 71mm Projection B01162C - 300mm c/c x 71mm Projection B01162D - 400mm c/c x 71mm Projection B01162E - 600mm c/c x 71mm Projection B40 16mm Ø Back to Back Fixing (Timber) B01164B - 200mm c/c x 66mm Projection B01164C - 300mm c/c x 66mm Projection B01164D - 400mm c/c x 66mm Projection B01164E - 600mm c/c x 66mm Projection Also Available for Glass Fixing SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Solid Section See page A6 for Matching Lever Handles

50 B01 SERIES 19MM Ø PULL HANDLES 19mm Ø Bolt Through Fixing (up to 63mm Thick) B01191B - 200mm c/c x 69mm Projection B01191C - 300mm c/c x 69mm Projection B01191D - 400mm c/c x 69mm Projection B01191E - 600mm c/c x 69mm Projection Projection 19mm Ø Concealed Face Fixing on Roses B01192B - 200mm c/c x 74mm Projection B01192C - 300mm c/c x 74mm Projection B01192D - 400mm c/c x 74mm Projection B01192E - 600mm c/c x 74mm Projection B41 c/c 19mm Ø Back to Back Fixing (Timber) B01194B - 200mm c/c x 69mm Projection B01194C - 300mm c/c x 69mm Projection B01194D - 400mm c/c x 69mm Projection B01194E - 600mm c/c x 69mm Projection Also Available for Glass Fixing SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Solid Section See page A8 for Matching Lever Handles

51 B01 SERIES 25MM Ø PULL HANDLES Projection 25mm Ø Bolt Through Fixing (up to 63mm Thick) B01251B - 200mm c/c x 75mm Projection B01251C - 300mm c/c x 75mm Projection B01251D - 400mm c/c x 75mm Projection B01251E - 600mm c/c x 75mm Projection 25mm Ø Concealed Face Fixing on Roses B01252B - 200mm c/c x 80mm Projection B01252C - 300mm c/c x 80mm Projection B01252D - 400mm c/c x 80mm Projection B01252E - 600mm c/c x 80mm Projection B42 c/c 25mm Ø Back to Back Fixing (Timber) B01254B - 200mm c/c x 75mm Projection B01254C - 300mm c/c x 75mm Projection B01254D - 400mm c/c x 75mm Projection B01254E - 600mm c/c x 75mm Projection Also Available for Glass Fixing SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Solid Section See page A8 for Matching Lever Handles

52 B02 B03 B04 SERIES PULL HANDLES B43

53 B02 SERIES PULL HANDLES Projection B02 Series - Cranked to the Side 16mm Ø Bolt Through Fixing (up to 63mm Thick) B02001B - 200mm c/c x 60mm Projection B02001C - 300mm c/c x 60mm Projection 16mm Ø Concealed Face Fixing on roses B02002B - 200mm c/c x 65mm Projection B02002C - 300mm c/c x 65mm Projection B44 c/c 16mm Ø Back to Back Fixing (Timber) B02004B - 200mm c/c x 60mm Projection B02004C - 300mm c/c x 60mm Projection Also Available for Glass Fixing SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Solid Section See page A10 for Matching Lever Handles

54 B03 SERIES PULL HANDLES B03 Series - Cranked to Door 16mm Ø Bolt Through Fixing (up to 63mm Thick) B03001B - 200mm c/c x 60mm Projection B03001C - 300mm c/c x 60mm Projection Projection 16mm Ø Concealed Face Fixing on Roses B03002B - 200mm c/c x 65mm Projection B03002C - 300mm c/c x 65mm Projection B45 16mm Ø Back to Back Fixing (Timber) B03004B - 200mm c/c x 60mm Projection B03004C - 300mm c/c x 60mm Projection Also Available for Glass Fixing c/c SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Solid Section See page A10 for Matching Lever Handles

55 B04 SERIES PULL HANDLES Projection B04 Series - Straight 16mm Ø Bolt Through Fixing (up to 63mm Thick) B04001B - 200mm c/c x 60mm Projection B04001C - 300mm c/c x 60mm Projection 16mm Ø Concealed Face Fixing on Roses B04002B - 200mm c/c x 65mm Projection B04002C - 300mm c/c x 65mm Projection B46 c/c 16mm Ø Back to Back Fixing (Timber) B04004B - 200mm c/c x 60mm Projection B04004C - 300mm c/c x 60mm Projection Also Available for Glass Fixing SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Solid Section See page A10 for Matching Lever Handles

56 B05 SERIES PULL HANDLES B47

57 B05 SERIES PULL HANDLES Projection 16mm Ø Bolt Through Fixing (up to 63mm Thick) 19mm Ø Bolt Through Fixing (up to 63mm Thick) 25mm Ø Bolt Through Fixing (up to 63mm Thick) B05161B - 200mm c/c x 66mm Projection B05161C - 300mm c/c x 66mm Projection B05191B - 200mm c/c x 69mm Projection B05191C - 300mm c/c x 69mm Projection B05251B - 200mm c/c x 75mm Projection B05251C - 300mm c/c x 75mm Projection 16mm Ø Concealed Face Fixing on Roses 19mm Ø Concealed Face Fixing on Roses 25mm Ø Concealed Face Fixing on Roses c/c B05162B - 200mm c/c x 71mm Projection B05162C - 300mm c/c x 71mm Projection B05192B - 200mm c/c x 74mm Projection B05192C - 300mm c/c x 74mm Projection B05252B - 200mm c/c x 80mm Projection B05252C - 300mm c/c x 80mm Projection 16mm Ø Back to Back Fixing (Timber) 19mm Ø Back to Back Fixing (Timber) 25mm Ø Back to Back Fixing (Timber) B05164B - 200mm c/c x 66mm Projection B05164C - 300mm c/c x 66mm Projection Also Available for Glass Fixing B05194B - 200mm c/c x 69mm Projection B05194C - 300mm c/c x 69mm Projection Also Available for Glass Fixing B05254B - 200mm c/c x 75mm Projection B05254C - 300mm c/c x 75mm Projection Also Available for Glass Fixing B48 SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Solid Section See page A12 for Matching Lever Handles

58 B06 SERIES PULL HANDLES B49

59 B06 SERIES PULL HANDLES Projection 16mm Ø Bolt Through Fixing (up to 63mm Thick) 19mm Ø Bolt Through Fixing (up to 63mm Thick) 25mm Ø Bolt Through Fixing (up to 63mm Thick) B06161B - 200mm c/c x 67mm Projection B06161C - 300mm c/c x 67mm Projection B06191B - 200mm c/c x 70mm Projection B06191C - 300mm c/c x 70mm Projection B06251B - 200mm c/c x 76mm Projection B06251C - 300mm c/c x 76mm Projection 16mm Ø Concealed Face Fixing on Roses 19mm Ø Concealed Face Fixing on Roses 25mm Ø Concealed Face Fixing on Roses B06162B - 200mm c/c x 72mm Projection B06162C - 300mm c/c x 72mm Projection B06192B - 200mm c/c x 75mm Projection B06192C - 300mm c/c x 75mm Projection B06252B - 200mm c/c x 81mm Projection B06252C - 300mm c/c x 81mm Projection c/c 16mm Ø Back to Back Fixing (Timber) B06164B - 200mm c/c x 67mm Projection B06164C - 300mm c/c x 67mm Projection Also Available for Glass Fixing 19mm Ø Back to Back Fixing (Timber) B06194B - 200mm c/c x 70mm Projection B06194C - 300mm c/c x 70mm Projection Also Available for Glass Fixing 25mm Ø Back to Back Fixing (Timber) B06254B - 200mm c/c x 76mm Projection B06254C - 300mm c/c x 76mm Projection Also Available for Glass Fixing B50 SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Solid Section See page A14 for Matching Lever Handles

60 B07 SERIES PULL HANDLES B51

61 B07 SERIES PULL HANDLES Projection 16mm Ø Bolt Through Fixing (up to 63mm Thick) 19mm Ø Bolt Through Fixing (up to 63mm Thick) 25mm Ø Bolt Through Fixing (up to 63mm Thick) B07161B - 200mm c/c x 66mm Projection B07161C - 300mm c/c x 66mm Projection B07161D - 400mm c/c x 66mm Projection B07161E - 600mm c/c x 66mm Projection B07191B - 200mm c/c x 69mm Projection B07191C - 300mm c/c x 69mm Projection B07191D - 400mm c/c x 69mm Projection B07191E - 600mm c/c x 69mm Projection B07251B - 200mm c/c x 75mm Projection B07251C - 300mm c/c x 75mm Projection B07251D - 400mm c/c x 75mm Projection B07251E - 600mm c/c x 75mm Projection 16mm Ø Concealed Face Fixing on Roses 19mm Ø Concealed Face Fixing on Roses 25mm Ø Concealed Face Fixing on Roses c/c B07162B - 200mm c/c x 71mm Projection B07162C - 300mm c/c x 71mm Projection B07162D - 400mm c/c x 71mm Projection B07162E - 600mm c/c x 71mm Projection B07192B - 200mm c/c x 74mm Projection B07192C - 300mm c/c x 74mm Projection B07192D - 400mm c/c x 74mm Projection B07192E - 600mm c/c x 74mm Projection B07252B - 200mm c/c x 80mm Projection B07252C - 300mm c/c x 80mm Projection B07252D - 400mm c/c x 80mm Projection B07252E - 600mm c/c x 80mm Projection 16mm Ø Back to Back Fixing (Timber) 19mm Ø Back to Back Fixing (Timber) 25mm Ø Back to Back Fixing (Timber) B52 B07164B - 200mm c/c x 66mm Projection B07164C - 300mm c/c x 66mm Projection B07164D - 400mm c/c x 66mm Projection B07164E - 600mm c/c x 66mm Projection B07194B - 200mm c/c x 69mm Projection B07194C - 300mm c/c x 69mm Projection B07194D - 400mm c/c x 69mm Projection B07194E - 600mm c/c x 69mm Projection B07254B - 200mm c/c x 75mm Projection B07254C - 300mm c/c x 75mm Projection B07254D - 400mm c/c x 75mm Projection B07254E - 600mm c/c x 75mm Projection Also Available for Glass Fixing Also Available for Glass Fixing Also Available for Glass Fixing SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Solid Section See page A16 for Matching Lever Handles

62 B08 SERIES PULL HANDLES B53

63 B08 SERIES PULL HANDLES Projection 16mm Ø Bolt Through Fixing (up to 63mm Thick) 19mm Ø Bolt Through Fixing (up to 63mm Thick) 25mm Ø Bolt Through Fixing (up to 63mm Thick) B08161B - 200mm c/c x 66mm Projection B08161C - 300mm c/c x 66mm Projection B08191B - 200mm c/c x 69mm Projection B08191C - 300mm c/c x 69mm Projection B08251B - 200mm c/c x 75mm Projection B08251C - 300mm c/c x 75mm Projection 16mm Ø Concealed Face Fixing on Roses 19mm Ø Concealed Face Fixing on Roses 25mm Ø Concealed Face Fixing on Roses c/c B08162B - 200mm c/c x 71mm Projection B08162C - 300mm c/c x 71mm Projection B08192B - 200mm c/c x 74mm Projection B08192C - 300mm c/c x 74mm Projection B08252B - 200mm c/c x 80mm Projection B08252C - 300mm c/c x 80mm Projection 16mm Ø Back to Back Fixing (Timber) 19mm Ø Back to Back Fixing (Timber) 25mm Ø Back to Back Fixing (Timber) B08164B - 200mm c/c x 66mm Projection B08164C - 300mm c/c x 66mm Projection Also Available for Glass Fixing B08194B - 200mm c/c x 69mm Projection B08194C - 300mm c/c x 69mm Projection Also Available for Glass Fixing B08254B - 200mm c/c x 75mm Projection B08254C - 300mm c/c x 75mm Projection Also Available for Glass Fixing B54 SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Solid Section See page A18 for Matching Lever Handles

64 B14 SERIES PULL HANDLES B55

65 B14 SERIES 19MM Ø PULL HANDLES Projection 19mm Ø Bolt Through Fixing (up to 63mm Thick) B14191B - 200mm c/c x 72mm Projection B14191C - 300mm c/c x 72mm Projection B14191D - 400mm c/c x 72mm Projection B14191E - 600mm c/c x 72mm Projection 19mm Ø Back to Back Fixing (Timber) (up to 63mm Thick) B56 B14194B - 200mm c/c x 72mm Projection B14194C - 300mm c/c x 72mm Projection B14194D - 400mm c/c x 72mm Projection B14194E - 600mm c/c x 72mm Projection c/c Also Available for Glass Fixing SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Solid Section See page A26 for Matching Lever Handles

66 B20 B21 SERIES PULL HANDLES B57

67 B20 B21 SERIES PULL HANDLES Projection B20001C Bolt Through Fixing (up to 63mm Thick) 300mm c/c x 60mm Projection B21001C Bolt Through Fixing (up to 63mm Thick) 300mm c/c x 60mm Projection B20004C Back to Back Fixing (Timber) 300mm c/c x 60mm Projection B21004C Back to Back Fixing (Timber) 300mm c/c x 60mm Projection Also Available for Glass Fixing Also Available for Glass Fixing c/c B58 SSS PSS GSS Solid Section See page A28 for Matching Lever Handles

68 B22 SERIES PULL HANDLES B59

69 B22 SERIES PULL HANDLES Projection 16mm Ø Bolt Through Fixing 19mm Ø Bolt Through Fixing 25mm Ø Bolt Through Fixing B22161B - 200mm c/c x 60mm Projection B22161C - 300mm c/c x 60mm Projection B22161D - 400mm c/c x 60mm Projection B22161E - 600mm c/c x 60mm Projection B22191B - 200mm c/c x 60mm Projection B22191C - 300mm c/c x 60mm Projection B22191D - 400mm c/c x 60mm Projection B22191E - 600mm c/c x 60mm Projection B22251C - 300mm c/c x 80mm Projection B22251D - 400mm c/c x 80mm Projection B22251E - 600mm c/c x 80mm Projection c/c 16mm Ø Concealed Face Fixed B22162B - 200mm c/c x 65mm Projection B22162C - 300mm c/c x 65mm Projection B22162D - 400mm c/c x 65mm Projection B22162E - 600mm c/c x 65mm Projection 19mm Ø Concealed Face Fixing B22192B - 200mm c/c x 65mm Projection B22192C - 300mm c/c x 65mm Projection B22192D - 400mm c/c x 65mm Projection B22192E - 600mm c/c x 65mm Projection 25mm Ø Concealed Face Fixing B22252C - 300mm c/c x 85mm Projection B22252D - 400mm c/c x 85mm Projection B22252E - 600mm c/c x 85mm Projection 25mm Ø Back to Back Fixing (Timber) 16mm Ø Back to Back Fixing (Timber) B22164B - 200mm c/c x 60mm Projection B22164C - 300mm c/c x 60mm Projection B22164D - 400mm c/c x 60mm Projection B22164E - 600mm c/c x 60mm Projection 19mm Ø Back to Back Fixing (Timber) B22194B - 200mm c/c x 60mm Projection B22194C - 300mm c/c x 60mm Projection B22194D - 400mm c/c x 60mm Projection B22194E - 600mm c/c x 60mm Projection B22254C - 300mm c/c x 80mm Projection B22254D - 400mm c/c x 80mm Projection B22254E - 600mm c/c x 80mm Projection Also Available for Glass Fixing B60 Also Available for Glass Fixing Also Available for Glass Fixing SSS PSS PB PBZ GSS PAA PBL PBZL PBPVD PBZPVD Solid Section

70 B23 SERIES PULL HANDLES B61

71 B23 SERIES PULL HANDLES Projection 19mm Ø Bolt Through Fixing (up to 63mm Thick) 25mm Ø Bolt Through Fixing (up to 63mm Thick) 32mm Ø Bolt Through Fixing (up to 63mm Thick) B23191C - 300mm c/c x 69mm Projection B23191D - 400mm c/c x 69mm Projection B23251D - 400mm c/c x 69mm Projection B23251E - 600mm c/c x 69mm Projection B23321D - 400mm c/c x 80mm Projection B23321E - 600mm c/c x 80mm Projection 19mm Ø Concealed Face Fixing on Roses 25mm Ø Concealed Face Fixing on Roses 32mm Ø Concealed Face Fixing on Roses B23192C - 300mm c/c x 74mm Projection B23192D - 400mm c/c x 74mm Projection B23252D - 400mm c/c x 74mm Projection B23252E - 600mm c/c x 74mm Projection B23322D - 400mm c/c x 85mm Projection B23322E - 600mm c/c x 85mm Projection c/c 19mm Ø Back to Back Fixing (Timber) 25mm Ø Back to Back Fixing (Timber) 32mm Ø Back to Back Fixing (Timber) B23194C - 300mm c/c x 69mm Projection B23194D - 400mm c/c x 69mm Projection Also Available for Glass Fixing B23254D - 400mm c/c x 69mm Projection B23254E - 600mm c/c x 69mm Projection Also Available for Glass Fixing B23324D - 400mm c/c x 80mm Projection B23324E - 600mm c/c x 80mm Projection Also Available for Glass Fixing B62 SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD Solid Section

72 B24 SERIES PULL HANDLES B63

73 B24 SERIES PULL HANDLES Projection 32mm Ø bolt Through Fixing (up to 63mm Thick) B24321C - 300mm c/c x 80mm Projection B24321D - 400mm c/c x 80mm Projection 38mm Ø Bolt Through Fixing (up to 63mm Thick) 32mm Ø Back to Back Fixing (Timber) B24381C - 300mm c/c x 80mm Projection B24381D - 400mm c/c x 80mm Projection B24324C - 300mm c/c x 80mm Projection B24324D - 400mm c/c x 80mm Projection 38mm Ø Back to Back Fixing (Timber) 32mm Ø Back to Back Fixing (Glass) B24384C - 300mm c/c x 80mm Projection B24384D - 400mm c/c x 80mm Projection c/c B24325C - 300mm c/c x 80mm Projection B24325D - 400mm c/c x 80mm Projection Hole Diameter Required 18mm 38mm Ø Back to Back Fixing (Glass) B24385C - 300mm c/c x 80mm Projection B24385D - 400mm c/c x 80mm Projection Hole Diameter Required 18mm B64 SSS PSS PB GSS PAA PBL PBPVD

74 B25 SERIES PULL HANDLES B65

75 B25 SERIES PULL HANDLES Projection 32mm Ø Bolt Through Fixing (up to 63mm Thick) 38mm Ø Bolt Through Fixing (up to 63mm Thick) 50mm Ø Bolt Through Fixing (up to 63mm Thick) B25321G mm c/c x 80mm Projection B25321H mm c/c x 80mm Projection B25321J mm c/c x 80mm Projection B25381G mm c/c x 80mm Projection B25381H mm c/c x 80mm Projection B25381J mm c/c x 80mm Projection B25501G mm c/c x 94mm Projection B25501H mm c/c x 94mm Projection B25501J mm c/c x 94mm Projection 32mm Ø Back to Back Fixing (Timber) 38mm Ø Back to Back Fixing (Timber) 50mm Ø Back to Back Fixing (Timber) c/c B25324G mm c/c x 80mm Projection B25324H mm c/c x 80mm Projection B25324J mm c/c x 80mm Projection B25384G mm c/c x 80mm Projection B25384H mm c/c x 80mm Projection B25384J mm c/c x 80mm Projection B25504G mm c/c x 94mm Projection B25504H mm c/c x 94mm Projection B25504J mm c/c x 94mm Projection 32mm Ø Back to Back Fixing (Glass) 38mm Ø Back to Back Fixing (Glass) 50mm Ø Back to Back Fixing (Glass) B25325G mm c/c x 80mm Projection B25325H mm c/c x 80mm Projection B25325J mm c/c x 80mm Projection Hole Diameter Required 18mm B25385G mm c/c x 80mm Projection B25385H mm c/c x 80mm Projection B25385J mm c/c x 80mm Projection Hole Diameter Required 18mm B25505G mm c/c x 94mm Projection B25505H mm c/c x 94mm Projection B25505J mm c/c x 94mm Projection Hole Diameter Required 18mm B66 SSS PSS PB GSS PBL PBPVD

76 B26 SERIES PULL HANDLES B67

77 SSS PSS PB GSS PAA PBL PBPVD B26 SERIES PULL HANDLES Projection 32mm Ø Bolt Through Fixing (up to 63mm Thick) 38mm Ø Bolt Through Fixing (up to 63mm Thick) 50mm Ø Bolt Through Fixing (up to 63mm Thick) B26321G mm c/c x 80mm Projection B26321H mm c/c x 80mm Projection B26321J mm c/c x 80mm Projection B26381G mm c/c x 80mm Projection B26381H mm c/c x 80mm Projection B26381J mm c/c x 80mm Projection B26501G mm c/c x 94mm Projection B26501H mm c/c x 94mm Projection B26501J mm c/c x 94mm Projection 32mm Ø Back to Back Fixing (Timber) 38mm Ø Back to Back Fixing (Timber) 50mm Ø Back to Back Fixing (Timber) c/c B26324G mm c/c x 80mm Projection B26324H mm c/c x 80mm Projection B26324J mm c/c x 80mm Projection B26384G mm c/c x 80mm Projection B26384H mm c/c x 80mm Projection B26384J mm c/c x 80mm Projection B26504G mm c/c x 94mm Projection B26504H mm c/c x 94mm Projection B26504J mm c/c x 94mm Projection 32mm Ø Back to Back Fixing (Glass) 38mm Ø Back to Back Fixing (Glass) 50mm Ø Back to Back Fixing (Glass) B26325G mm c/c x 80mm Projection B26325H mm c/c x 80mm Projection B26325J mm c/c x 80mm Projection Hole Diameter Required 18mm B26385G mm c/c x 80mm Projection B26385H mm c/c x 80mm Projection B26385J mm c/c x 80mm Projection Hole Diameter Required 18mm B26505G mm c/c x 94mm Projection B26505H mm c/c x 94mm Projection B26505J mm c/c x 94mm Projection Hole Diameter Required 18mm B68

78 B27 SERIES PULL HANDLES B69

79 SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD B27 SERIES PULL HANDLES Solid Section See page A26 for Matching Lever Handles Projection 19mm Ø Twin Section Bolt Through Fixing (up to 63mm Thick) 19mm Ø Twin Section Bolt Through Fixing (up to 63mm Thick) 19mm Ø Twin Section Bolt Through Fixing (up to 63mm Thick) B27001C - 300mm c/c x 72mm Projection 430mm o/a B27001D - 400mm c/c x 72mm Projection 530mm o/a B27001E - 600mm c/c x 72mm Projection 730mm o/a 19mm Ø Twin Section Back to Back Fixing (Timber) 19mm Ø Twin Section Back to Back Fixing (Timber) 19mm Ø Twin Section Back to Back Fixing (Timber) B27004C - 300mm c/c x72mm Projection 430mm o/a B27004D - 400mm c/c x 72mm Projection 530mm o/a B27004E - 600mm c/c x 72mm Projection 730mm o/a c/c 19mm Ø Twin Section Back to Back Fixing (Glass) 19mm Ø Twin Section Back to Back Fixing (Glass) 19mm Ø Twin Section Back to Back Fixing (Glass) B70 B27005C - 300mm c/c x 72mm Projection 430mm o/a Hole Diameter Required 13mm B27005D - 400mm c/c x 72mm Projection 530mm o/a Hole Diameter Required 13mm B27005E - 600mm c/c x 72mm Projection 730mm o/a Hole Diameter Required 13mm

80 BACKPLATE SYSTEM PUSH SIDE B71

81 SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD BACKPLATE SYSTEM PUSH SIDE B x 65 x 3mm Plate c/w Blank Covers B x 65 x 3mm Plate c/w Blank Covers B x 65 x 3mm Plate c/w Sign/Symbol Top End and Blank Cover Bottom End B x 65 x 3mm Plate c/w Sign/Symbol Top End and Blank Cover Bottom End B x 65 x 3mm Plate c/w Blank Cover Top End and Cylinder Rose Bottom End B x 65 x 3mm Plate c/w Blank Cover Top End and Cylinder Rose Bottom End B x 65 x 3mm Plate c/w Sign/Symbol Top End and Cylinder Rose Bottom End B x 65 x 3mm Plate c/w Sign/Symbol Top End and Cylinder Rose Bottom End B x 65 x 3mm Plate c/w Two Sign/Symbol Top End and Blank Cover Bottom End B x 65 x 3mm Plate c/w Two Sign/Symbol Top End and Cylinder Rose Bottom End B x 65 x 3mm Plate c/w Two Sign/Symbol Top End and Blank Cover Bottom End B x 65 x 3mm Plate c/w Two Sign/Symbol Top End and Cylinder Rose Bottom End B72 Fully Concealed Fixing Directional Backplate System Lengths to Match Pull Handle Side Backplates On Page B74 Specify Signs and Symbols To Suit Door Location From Page B76 Suffix Item Number for Cylinder Type PC Euro Cylinder OC Oval Cylinder LK Lever Key KC 22mm Round Cylinder RC Rim Cylinder

82 BACKPLATE SYSTEM PULL SIDE B73

83 SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD BACKPLATE SYSTEM PULL SIDE B x 65 x 3mm Pull Handle Plate c/w Blank Covers B x 65 x 3mm Pull Handle Plate c/w Blank Covers B x 65 x 3mm Pull Handle Plate c/w Sign/Symbol Top End and Blank Cover Bottom End B x 65 x 3mm Pull Handle Plate c/w Sign/Symbol Top End and Blank Cover Bottom End B x 65 x 3mm Pull Handle Plate c/w Blank Cover Top End and Cylinder Rose Bottom End B x 65 x 3mm Pull Handle Plate c/w Blank Cover Top End and Cylinder Rose Bottom End B x 65 x 3mm Pull Handle Plate c/w Sign/Symbol Top End and Cylinder Rose Bottom End B x 65 x 3mm Pull Handle Plate c/w Sign/Symbol Top End and Cylinder Rose Bottom End B x 65 x 3mm Pull Handle Plate c/w Two Sign/Symbol Top End and Blank Cover Bottom End B x 65 x 3mm Pull Handle Plate c/w Two Sign/Symbol Top End and Blank Cover Bottom End B x 65 x 3mm Pull Handle Plate c/w Two Sign/Symbol Top End and Cylinder Rose Bottom End B x 65 x 3mm Pull Handle Plate c/w Two Sign/Symbol Top End and Cylinder Rose Bottom End B74 Fully Concealed Fixing Directional Backplate System Lengths to Match Push Plate Side Backplates On Page B72 Specify Signs and Symbols To Suit Door Location From Page B76 Specify 300 or 400mm c/c Fusion Pull Handles (Bolt Fixing) to Design Choice Suffix Item Number for Cylinder Type PC Euro Cylinder OC Oval Cylinder LK Lever Key KC 22mm Round Cylinder RC Rim Cylinder

84 BACKPLATE SYSTEM DOOR PULLS B x 65 x 3mm Door Pull c/w Euro Cylinder Rose and Buffer Grip B x 65 x 3mm Door Pull c/w Blank Cover and Buffer Grip B x 65 x 3mm Door Pull c/w Sign/Symbol and Buffer Grip B x 65 x 3mm Door Pull c/w Sign/Symbol, Euro Cylinder Rose & Buffer Grip B75 Specify Signs and Symbols To Suit Door Location From Page B76 Please Suffix Item Number with Cylinder Type: as page B72/B74 SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD

85 BACKPLATE SYSTEM SIGNS/SYMBOLS B84010 Fire Door Keep Shut B84020 Fire Door Keep Locked B84030 Automatic Fire Door Keep Clear B84040 Fire Door Keep Locked Shut B84050 Keep Locked Shut B84060 Fire Escape Keep Clear B84070 Male Symbol B84080 Female Symbol B84090 Unisex Symbol B84100 Disabled Symbol B84110 Baby Change Symbol B84120 Shower Symbol B84130 Mop & Bucket Symbol B76 B84140 Cloakroom Symbol B84150 First Aid Symbol B84160 Arrow to Right B84170 Arrow to Left B84180 Arrow Up or Straight B84190 Arrow Down or Back B84200 Electrical Warning Symbol B84210 Telephone Symbol B84220 Private B84230 No Entry Symbol B84240 Dry Riser B84250 Fire Hose Reel B84260 No Smoking Symbol 50 Ø x 5mm projection Secret Fixed Option Natural Background with Black Letters on Fire Signage Suffix Item Number NL Braille Version of Fusion Signage Available to Order B84270 Push SSS PSS PB PBZ GSS PBL PBZL PBPVD PBZPVD B84280 Pull B84290 W.C. B84300 To Customers Own Design

86 SSS PSS PB PBZ GSS PAA PBL PBZL PBPVD PBZPVD Note: All Plates Supplied with Pozi-drive Countersunk Woodscrews as Standard PUSH AND KICKING PLATES Fusion Square Cornered Push Plates 1.5mm thick B90002A 200 x 75mm B90002B 250 x 75mm B90002C 350 x 75mm B90002D 450 x 75mm B90002E 650 x 75mm B90002F 700 x 75mm B90002X Size to Order Fusion Rounded End Push Plates 1.5mm thick B91002A 200 x 75mm B91002B 250 x 75mm B91002C 350 x 75mm B91002D 450 x 75mm B91002E 650 x 75mm B91002F 700 x 75mm B91002X Size to Order Fusion Radiused Cornered Push Plates 1.5mm thick B92002A 200 x 75mm B92002B 250 x 75mm B92002C 350 x 75mm B92002D 450 x 75mm B92002E 650 x 75mm B92002F 700 x 75mm B92002X Size to Order B77 Fusion Square Cornered Kicking Plates 1.5mm thick Fusion Radiused Cornered Kicking Plates 1.5mm thick B53001 Torx Head Security Screws to Suit Fusion Plates B53002 Security Screw Fixing Tool B50002X State Size Required B52002X State Size Required

87 C SECTION DOOR STOPS COAT HOOKS CYLINDER PULLS FLUSH PULLS L DESIGN DEE HANDLES T DESIGN DEE HANDLES F DESIGN DEE HANDLES CUPBOARD KNOBS DOOR EDGE PULLS C78

88 SSS PSS PB PBZ GSS PAA PBL PBZL DOOR STOPS C201 Floor Door Stop C202 Floor Door Stop 45mm ø o/a - c/w Wood and Stone Secure Fixing C203 Floor Door Stop 80mm high - c/w Wood and Stone Secure Fixing C204 Floor Door Stop 100mm high - c/w Wood and Stone Secure Fixing C205 Floor Door Stop 45mm ø o/a - c/w Wood and Stone Secure Fixing C79 C206 Floor Door Stop 80mm high - c/w Wood and Stone Secure Fixing C207 Floor Door Stop 100mm high - c/w Wood and Stone Secure Fixing C208 Wall Door Stop 50mm projection c/w Concealed Fixed Stabilising Washer C209 Wall Door Stop 63mm projection c/w Concealed Fixed Stabilising Washer C210 Wall Door Stop 75mm projection c/w Concealed Fixed Stabilising Washer

89 SSS PSS PB PBZ GSS PBL PBZL HOOKS C301 Coat Hook 30mm Projection c/w Concealed Fixed Stabilising Washer and Anti-Spin Lock Facility - 14mm ø C302 Coat Hook 50mm Projection c/w Concealed Fixed Stabilising Washer and Anti-Spin Lock Facility - 14mm ø C303 Coat Hook 40mm Projection c/w Concealed Fixed Stabilising Washer and Anti-Spin Lock Facility - 14mm ø C304 Straight U Hook 50mm Projection c/w Concealed Fixings - 14mm ø C80 C305 Buffered Coat Hook 35mm Projection c/w Concealed Fixed Stabilising Washer and Anti-Spin Lock Facility - 14mm ø C306 Buffered Coat Hook 55mm Projection c/w Concealed Fixed Stabilising Washer and Anti-Spin Lock Facility - 14mm ø C307 Buffered Coat Hook 45mm Projection c/w Concealed Fixed Stabilising Washer and Anti-Spin Lock Facility - 14mm ø C308 Cranked U Hook 50mm Projection c/w Concealed Fixings 14mm ø

90 SSS PSS PB PBZ GSS PBL PBZL SURFACE PULLS C501 Rim Cylinder Pull 83 x 33mm Projection C502 Euro Cylinder Pull 83 x 33mm Projection C503 22mm Round Cylinder Pull 83 x 33mm Projection C504 Lever Key Pull 83 x 33mm Projection C505 Blank Pull 83 x 33mm Projection C506 Oval Cylinder Pull 83 x 33mm Projection C81 FLUSH PULLS C601 Flush Pull 70mm o/a ø C602 Flush Pull 100mm o/a ø C603 Flush Pull 120 x 60mm o/a C604 Flush Pull 180 x 60mm o/a C605 Flush Pull 90mm o/a ø

91 SSS PSS PB PBZ GSS PBL PBZL Note: These Handles are for use on Cupboards/Cabinets Fixings to Suit Doors up to 30mm Thick Other Lengths Made to Order CABINET HANDLES C701 L Design Dee Handle 8mm Ø A - 100mm centres B - 125mm centres C - 150mm centres D - 175mm centres E - 200mm centres C703 T Design Dee Handle 10mm Ø A - 100mm centres B - 125mm centres C - 150mm centres D - 175mm centres E - 200mm centres F - 250mm centres G - 300mm centres H - 350mm centres J - 400mm centres K - 450mm centres L - 500mm centres C705 F Design Dee Handle 10mm Ø A - 100mm centres B - 125mm centres C - 150mm centres D - 175mm centres E - 200mm centres F - 250mm centres G - 300mm centres H - 350mm centres J - 400mm centres K - 450mm centres L - 500mm centres C82 C702 L Design Dee Handle 10mm Ø A - 100mm centres B - 125mm centres C - 150mm centres D - 175mm centres E - 200mm centres F - 250mm centres G - 300mm centres H - 350mm centres C704 T Design Dee Handle 12mm Ø B - 125mm centres C - 150mm centres D - 175mm centres E - 200mm centres F - 250mm centres G - 300mm centres H - 350mm centres J - 400mm centres K - 450mm centres L - 500mm centres C706 F Design Dee Handle 12mm Ø A - 100mm centres B - 125mm centres C - 150mm centres D - 175mm centres E - 200mm centres F - 250mm centres G - 300mm centres H - 350mm centres J - 400mm centres K - 450mm centres L - 500mm centres

92 CUPBOARD KNOBS Ball Design Bolt Fixed Knobs C801-16mm Ø C802-19mm Ø C803-25mm Ø Index Design Bolt Fixed Knobs C804-16mm Ø x 22mm Projection C805-19mm Ø x 22mm Projection C806-25mm Ø x 28mm Projection Shark Design Bolt Fixed Knobs C807-16mm Ø x 21mm Projection C808-19mm Ø x 31mm Projection C809-25mm Ø x 40mm Projection Flute Design Bolt Fixed Knobs C810-19mm Ø x 25mm Projection C811-25mm Ø x 32mm Projection SSS PSS PB PBZ GSS FLUSH RINGS AND DOOR EDGE PULLS C83 C x 65mm Recessed Ring Pull c/w Follower C x 75mm Recessed Ring Pull c/w Follower C x 90mm Recessed Ring Pull c/w Follower SNP PNP PB PBZ C x 90mm Flush Recessed Ring Handle c/w Follower C905 - Rolled Grip Straight Door Edge Pull Made to Suit Door Thickness and Client s Design SSS PSS PB PBZ GSS PBL PBZL C906 - Rolled Grip Cranked Door Edge Pull Made to Suit Door Thickness, Angle Required and Client s Design

93 D SECTION HINGES D84

94 HINGES SSS PSS PBP PBZP 76mm D x 76mm 89mm D x 89mm MADW 120kg MADW 120kg Template Drilled Template Drilled Maintenance Free Maintenance Free 101mm Square Corners Minimum Door Thickness 35mm 101mm Square Corners Minimum Door Thickness 44mm Concealed Self Lubricating Bearings Concealed Self Lubricating Bearings Certifire Ref CF 215 Certifire Ref CF 215 D31 As above c/w R10 Radius Corners D33 As above c/w R10 Radius Corners D85 101mm D x 101mm 101mm D x 101mm MADW 120kg MADW 160kg Template Drilled Template Drilled Maintenance Free Maintenance Free 101mm Square Corners Minimum Door Thickness 44mm 114mm Square Corners Minimum Door Thickness 44mm Concealed Self Lubricating Bearings Concealed Self Lubricating Bearings Certifire Ref CF 215 D35 As above c/w R10 Radius Corners D37 As above c/w R10 Radius Corners

95 HINGES Handing Diagrames on Page IV 77mm D38 Rising Butt Hinge FIL 77mm D40 Falling Butt Hinge FIL 100 x 77mm 100 x 77mm MADW 60kg Template Drilled MADW 50kg Maximum Operning 120 o 100mm Minimum Door Thickness 29mm Two Hinges per Door Leaf 100mm Template Drilled Minimum Door Thickness 29mm Fitted Co-Axially Two Hinges per Door Leaf Fitted Co-Axially D39 Rising Butt Hinge FIR As Above SSS PSS D41 Falling Butt Hinge FIR As Above SSS PSS D86 84mm D42 Lift-off Hinge FIL 88mm D44 Lift-off Hinge FIL 98 x 84mm 100 x 88mm MADW 80kg MADW 80kg Template Drilled Template Drilled 98mm Minimum Door Thickness 44mm 100mm Minimum Door Thickness 44mm Certifire Ref CF 209 Certifire Ref CF 209 D43 Lift-off Hinge FIR D45 Lift-off Hinge FIR As Above As Above SSS PSS BZP SZP PBP PBZP PCP SSSP SSS PSS BZP SZP PBP PBZP PCP SSSP

96 HINGES 76mm D x 76mm 88mm D50 Power Transfer Hinge 100 x 88mm MADW 120kg MADW 120kg Template Drilled 2 Wire Conductors - 24v max Square Corners For Use with D32 Hinges 101mm Minimum Door Thickness 35mm 100mm Certifire Ref CF 230 D51 As Above c/w 4 Wire Conductors D47 As Above c/w R10 Radius Corners SSS PSS PBP PBZP SSS PSS D87 93mm D x 93mm 93mm D48 Power Transfer Hinge 125 x 93mm MADW 120kg MADW 120kg Template Drilled 8 Wire Conductors - 24v max Maintenance Free For Use with D58 Hinges 125mm Square Corners Minimum Door Thickness 44mm Certifire Ref CF mm D49 As Above c/w 12 Wire Conductors D59 As Above c/w R10 Radius Corners SSS PSS PBP PBZP SSS PSS PBP PBZP

97 Note: Door Height, Width, Thickness and Weight Required for Correct Specification HINGES CONCEALED 97mm D52 Concealed Hinge 79mm D53 Concealed Hinge 140 x 97mm 118 x 79mm Minimum Door thickness 47mm Minimum Door Thickness 41mm BRS SNP PNP BRS SNP PNP 140mm 118mm D54 Concealed Hinge 30 Minute Fire Rated As Above D55 Concealed Hinge 60 Minute Fire Rated SSS PSS D88 69mm D56 Concealed Hinge 51mm D57 Concealed Hinge 118 x 69mm 96 x 51mm Minimum Door Thickness 35mm Minimum Door Thickness 28mm BRS SNP PNP 96mm BRS SNP PNP 118mm

98 E SECTION CYLINDERS MODULAR LOCK CASES NARROW STILE LOCK CASES HEAVY DUTY LOCK CASES HORIZONTAL LOCK CASES E89

99 CYLINDERS E2000 SERIES Euro Single Cylinder E mm Length E mm Length E Length to Order Euro Cylinder and Turn E mm Length* E mm Length* E mm Length* E Length to Order* *Option For Bathroom Cylinder Indicater and Turn, Suffix Item Number WC Euro Double Cylinder E mm Length E mm Length E mm Length E Length to Order E2019 Extra Standard Differ Key E2020 Extra Suited Differ Key E2021 Sub Master Key E90 E2022 Grand Master Key Each Cylinder is Supplied with 3 Keys SNP PCP PB PGP Round Screw in Cylinder E Single Cylinder E Two Cylinders to Pass Same Key E Screw in Turn Only Rim Cylinder E Rim Cylinder, Tail Cut on Site to Suit Door Thickness Euro Single Turn Only E mm Length E mm Length E Length to Order l Option E4000 Series Turn Knob used with E2000 Series Cylinders suffix part number E4K Suffix Part Number with MK for Master Keyed Versions Features l 5 Pin Tumbler Mechanism l Patent Protection l Restricted Key Profiles l Anti-Pick Section l Paracentric Key Planes l Anti-Drill Protection l Conforms to BS EN1303 l Other Cylinder Shape Formats Available to Order

100 CYLINDERS E4000 SERIES Euro Single Cylinder E mm Length E mm Length E Length to Order Round Screw in Cylinder E Single Cylinder E Two Cylinders to Pass Same Key E Screw in Turn to Suit Euro Cylinder and Turn E mm Length* E mm Length* E mm Length* E Length to Order* *Option For Bathroom Cylinder Indicater and Turn, Suffix Item Number WC Rim Cylinder E Rim Cylinder, Tail Cut on Site to Suit Door Thickness Euro Double Cylinder E mm Length E mm Length E mm Length E Length to Order Euro Single Turn Only E mm Length E mm Length E Length to Order E4019 Extra Standard Differ Key E4020 Extra Suited Differ Key E4021 Sub Master Key E4022 Grand Master Key Each Cylinder is Supplied with 3 Keys SNP PCP PB PGP Suffix Part Number with MK for Master Keyed Versions Features l 16 Pin Mechanism l Patent Protection l Restricted Key Profiles l Anti-pick Protection l Anti-drill Protection l Reinforced Stable Key Guide l Conforms to BS EN1303 l Other Cylinder Shape Formats Available to Order Options ABC - Anti-Barricade Clutch System SP - Saltwater Protection Shield AS - Armour Shield Protection HT - High Traffic Common Door Upgrade E91

101 SSS PSS PGP Standard Striking Plate Supplied Suits Doors Up to 45mm Thick E6000 SERIES LOCKS 90mm E6001 Mortice Latch E6003 Mortice WC/Bathroom Lock 60mm Backset Standard 60mm Backset Standard 80mm to Order 80mm To Order Self Adjusting Bronze Bushed Follower, Rattle Free Handles Self Adjusting Bronze Bushed Follower, Rattle Free Handles 235mm 165mm Sleeved Through Bolt Fixing Apertures Reversible Sleeved Through Bolt Fixing Apertures Reversible 24mm Wide Square Forend Standard 24mm Wide Square Forend Standard Radiused to Order Suffix Item Number R Radiused to Order Suffix Item Number R 8mm Square Turn 78mm c/c E92 E6002 Euro Mortice Sash Lock Case E6004 Upright Euro Mortice Dead Lock Case 60mm Backset Standard 60mm Backset Standard 80mm to Order 80mm To Order 72mm Centres Sleeved Through Bolt Fixing Apertures Self Adjusting Bronze Bushed Follower, Rattle Free Handles Sleeved Through Bolt Fixing Apertures Reversible 24mm Wide Square Forend Standard Radiused to Order Suffix Item Number R Double Throw Deadbolt 24mm Wide Square Forend Standard Radiused to Order Suffix Item Number R Double Throw Deadbolt

102 SSS PSS PGP *E mm Rebate Set *E mm Rebate Set *E mm Rebate Set for E6007 *E mm Rebate Set for E6007 E6000 SERIES LOCKS *E Intumescent Protection Pack *Specify Lock Type 90mm E6005 Euro Mortice Night Latch Case 60mm Backset Standard 90mm E6007 Euro Mortice Small Case Dead Lock Case 60mm Backset Standard 80mm To Order 24mm Wide Square Forend Standard 72mm Centres Radiused to Order Suffix Item Number R Self Adjusting Bronze Bushed Follower, Rattle Free Handles Double Throw Deadbolt 235mm 165mm Sleeved Through Bolt Fixing Apertures 170mm 100mm Reversible 24mm Wide Square Forend Standard Radiused to Order Suffix Item Number R E93 92mm E6006 Euro Mortice Auto Deadlocking Night Latch Case 60mm Backset Standard 98mm E6008 Euro Mortice Panic Function Sash Lock Case Lever Handle From Inside Retracts Both Bolts in One Movement 72mm Centres 65mm Backset Standard Door Hand Required Door Hand Required 24mm Wide Square Forend 24mm Wide Square Forend 235mm 165mm Radiused to Order Suffix Item Number R 235mm 165mm Radiused to Order Suffix Item Number R Handing Diagrams on Page V 9mm follower (Split) See Page S162 For Spindle Double Throw Deadbolt Handing Diagrams on Page V

103 SSS PSS PGP Note: Overall Case Depths are Backset Dimension D + 16mm These Locks are all Supplied Without a Strike Plate E6000 SERIES LOCKS NARROW STILE D E6009 Euro Mortice Sash Lock Case E6010 Euro Mortice Hook Bolt Sash Lock Case 92mm Centres 92mm Centres Bronze Bushed Follower Bronze Bushed Follower Reversible Reversible 24mm Wide Square Forend 24mm Wide Square Forend 285mm 215mm Specify Backset D from Specify Backset D from A - 25mm A - 25mm B - 30mm B - 30mm C - 35mm C - 35mm D - 40mm D - 40mm E - 45mm E - 45mm E94 D E6011 Euro Mortice Swing Bolt Dead Lock Case 24mm Wide Square Forend Specify Backset D from E6012 Euro Mortice Hook Bolt Deadlock Case 24mm Wide Square Forend Specify Backset D from E6013 Mortice latch Bronze Bushed Follower Reversible 24mm Wide Square Forend A - 25mm A - 25mm Specify Backset D from 220mm 150mm B - 30mm C - 35mm D - 40mm E - 45mm B - 30mm C - 35mm D - 40mm E - 45mm A - 25mm B - 30mm C - 35mm D - 40mm E - 45mm

104 *E mm Rebate Set *E mm Rebate Set *E Intumescent Protection Pack *Specify Lock Type SSS PSS PB PBZ E7000 SERIES LOCKS 93mm E7001 Mortice Latch E7004 Upright Euro Mortice Deadlock Case E7008 Security Mortice Auto Deadlocking Night Latch Case 235mm 165mm 24mm Hardened Deadbolt E7002 Euro Mortice Sash Lock Case E7006 Euro Mortice Auto Deadlocking Night Latch Case E7009 Security Euro Mortice Sash Lock Case 24mm Hardened Deadbolt E7000 Series l60mm Backset lfusion Clamp Follower lrattle Free Handles E95 lreversible lanti-friction Triple Latch Bolt l14mm Deadbolt Throw lsilent Closing E7003 Mortice WC/Bathroom Lock E7007 Classroom Function, Auto Deadlocking Night Latch Case l72mm Centres lstandard Striking Plate Supplied Suits Doors Up to 54mm Thick Cylinder or Turn Inside Room Makes Outside Lever Handle Inoperative l25mm Wide Square Forend lradiused to Order Suffix Number R Inside Lever Opens Door at all Times Handing Diagrams on Page IV

105 SS PSS PB PBZ 147mm 125mm E8000 SERIES LOCKS HORIZONTAL 51mm 132mm 76mm 17mm E8001 Horizontal Mortice Latch E8003 Horizontal Mortice Bathroom Lock E8005 Horizontal Euro Mortice Sash Lock Case Sprung for Fusion Knob Furniture E8002 Sprung for Fusion Lever Handles 8mm Turn Follower, Sprung for Fusion Knob Furniture E8004 Sprung for Fusion Lever Handles Sprung for Fusion Knob Furniture E8006 Sprung for Fusion Lever Handles E96 *E mm Rebate Set *E mm Rebate Set *E mm Rebate Set *E Intumescent Protection Pack *Specify Lock Type E8007 Horizontal Euro Mortice Dead Lock Case E8008 Horizontal Euro Mortice Night Latch Case Sprung for Fusion Knob Furniture E8009 Sprung for Fusion Lever Handles

106 SSS PSS PB PBZ E9000 SERIES LOCKS 76/101mm 76/101mm 101mm 57/82mm 57/82mm 82mm LOCK 108mm 134mm 76mm 134mm 76mm OUTSIDE 152mm E9001 Euro Mortice Sliding Door Lock Case 76mm o/a - 57mm Backset E mm o/a - 82mm Backset 30mm 53mm 14mm E9003 8mm Turn Operated Sliding Door Lock 76mm o/a - 57mm Backset E mm o/a - 82mm Backset 63mm 14mm E9005 Disabled Door Lock - Lever handle Controlled Locking and Unlocking in One Movement 101mm o/a - 82mm Backset 76mm INSIDE 14mm OPEN OPEN E9009 Rim Night Latch Case and Staple 93mm Wide E9010 Narrow Style Version 60mm Wide E9011 Rim Deadlock Case and Staple 93mm Wide E9012 Roller Bolt Rim Deadlock Case and Staple 93mm Wide Note Cylinder to Suit Above to be Specified Separately WE PBP PCP SCP E97 57mm 102mm 62mm 51mm 109mm 134mm 38mm 76mm 35mm 14mm E9006 Anzac Mortice Turn Operated Service/Duct Lock c/w key and Porthole Escutcheon SE BRS E9007 Mortice Adjustable Roller Catch E9008 8mm Turn Operated Cubicle Deadlock E mm o/a Mortice Light Duty Roller Catch

107 F SECTION OVERHEAD DOOR CLOSERS TRACK ARM DOOR CLOSERS ELECTRO-MAGNETIC DOOR CLOSERS CONCEALED DOOR CLOSERS UNDERFLOOR DOOR CLOSERS PIVOTS DOOR SELECTORS DOOR STAYS F98 MAGNETIC DOOR HOLDERS

108 DOOR CONTROLS OVERHEAD F150 Overhead Door Closer With Fully Adjustable Power and Adjustable Backcheck F250 Overhead Door Closer With Fully Adjustable Power, Adjustable Backcheck and Adjustable Delayed Action Specification l Fig 1 Fixing to Opening Face of Door, Left & Right Reversible lpower: EN2 to 4 Adjustable ldoor Size: 850 to 1100mm wide ldoor Weight: Up to 80kg ladjustable Closing Force ladjustable Latching Speed ladjustable Backcheck lfull Metal Cover and Matching Arm Specification l Fig 1 Fixing to Opening Face of Door, Left & Right Reversible l Power: EN2 to 6 Adjustable l Door Size: 850 to 1400mm Wide l Door Weight: Up to 120kg l Adjustable Closing Force l Adjustable Latching Speed l Adjustable Backcheck l Adjustable Delayed Action F99 lthird Party Tested to BS EN1154 lclassification 4 8 4/ lcertifire approved Ref CF 268 SSS PSS PB PBZ GSS PAA 70mm Options 45mm F151 Fig 6 Bracket for Fixing to Closing Face of Door (Max Door Width 950mm) 240mm l Full Metal Cover and Matching Arm l Third Party Tested to BS EN1154 l Classification 4 8 6/ l Certifire Approved Ref CF 118 SSS PSS PB PBZ GSS PAA 73mm Options 50mm F251 Fig 6 Bracket for Fixing to Closing Face of Door (Max Door Width 1050mm) 300mm F152 Soffit Bracket for Fig 1 Fixing with Shaped Architrave F252 Soffit Bracket for Fig 1 Fixing with Shaped Architrave F153 Mechanical Hold Open Arm (Not to be used on Fire Doors) F253 Mechanical Hold Open Arm ( Not to be used on Fire Doors)

109 DOOR CONTROLS TRACK ARM F1000 Series Overhead Cam Action Track Arm Fully Adjustable Power Door Closer max 12mm Fig 1 Specification l Fig 1, 6, 61 & 616 Fixing Fully Reversible in One Unit l Power EN 2 to 4 Adjustable l Door Size 850 to 1100mm Wide l Door Weight Up to 80kg Fig 61 l Adjustable Closing Force l Adjustable Closing Speed max 3mm l Adjustable Latching Speed l Full Metal Cover with Matching Track Channel and Arm l Third Party Tested to BS EN1154 l Classification 3 8 4/ l Certifire Approved Ref CF 139 F1004 Electro-mechanical Hold-open and Integral Smoke Detector Arm and Channel, 24v DC, Power Supply 230v AC Adjustable Release Force Third Party Tested to BS EN1155 max 26mm Fig 6 F100 F1001 Cam Action Door Closer Body and Cover F1002 Standard Slide Arm and Channel F1003 Electro-mechanical Hold-open Arm and Channel, 24v DC, Power Input 1.4W F1005 Mechanical Hold-open Unit (Not to be used on Fire Doors) F1006 Mounting Backplate for Channel When Direct Fixing is not Possible F1007 Angle Backplate for Channel to Transom with Deep Reveals When Fixing the Closer on the Closing Face of the Door max 30mm Fig 616 Adjustable Release Force Third Party Tested to BS EN1155 For Power Supply Unit See Page K140 SSS PSS PB PBZ GSS PAA

110 DOOR CONTROLS TRACK ARM F2000 Series Overhead Cam Action Track Arm Fully Adjustable Power, Backcheck and Delayed Action Door Closer Specification F Fig 1 & Fig 616 Fixing Reversible F Fig 6 & Fig 61 Fixing Reversible F Fig 1 & Fig 616 Fixing Reversible F Fig 6 & Fig 61 Fixing Reversible Power F2001 & F2002 EN 2 to 5 Adjustable F2003 & F2004 EN 5 to 7 Adjustable Door Size F2001 & F to 1250mm Wide F2003 & F to 1600mm Wide Door Weight F2001 & F2002 Up to 100kg F2003 & F2004 Up to 160kg l Adjustable Closing Force l Adjustable Closing Speed l Adjustable Latching Speed l Adjustable Backcheck l Adjustable Delayed Action l Full Metal Cover with Matching Track Channel and Arm l Third Party Tested to BS EN1154 l F2001-F2002 Classification l F2003-F2004 Classification 4 8 5/ / l Certifire Approved Ref CF 119 See Next Page for Fixing Applications and Part Numbers F101 SSS PSS PB PBZ GSS PAA

111 DOOR CONTROLS TRACK ARM F2001 Cam Action Door Closer Body and Cover Fig 1 & Fig 616 Fixing/EN2 to 5 Power F2002 Cam Action Door Closer Body and Cover Fig 6 & Fig 61 Fixing/EN2 to 5 Power F2003 Cam Action Door Closer Body and Cover Fig 1 & Fig 616 Fixing/EN5 to 7 Power F2004 Cam Action Door Closer Body and Cover Fig 6 & Fig 61 Fixing/EN5 to 7 Power F2005 Standard Slide Arm & Channel F2006 Electro-mechanical Hold-open Arm and Channel, 24v DC, Power Input 1.4W Adjustable Release Force Third Party Tested to BS EN1155 F2007 Electro-mechanical Hold-open and Integral Smoke Detector Arm and Channel, 24v DC, Power Supply 230v AC Adjustable Release Force Third Party Tested to BS EN1155 F2008 Mechanical Hold-open Unit (Not to be used on Fire Doors) F2009 Mounting Backplate for Channel When Direct Fixing is not Possible F2010 Angle Backplate for Channel to Transom With Deep Reveals When Fixing Closer on the Closing Face of the Door F2011 Special Application for Rebated Pairs of Doors With Internal Door Co-ordinator (Joinery Details Required) F2012 As F2011 c/w Electro-mechanical Hold-open Facility For Power Supply Unit See Page K140 max 16mm Fig 1 max 26mm Fig 6 F102 F2001 F2003 F2002 F2004 Fig 616 Fig 61 max 30mm max 3mm F2001 F2003 F2002 F2004

112 F3000 Series Overhead Electro-Magnetic Hold-Open/Free Swing Door Closers DOOR CONTROLS ELECTRO-MAGNETIC HOLD-OPEN/FREE SWING OVERHEAD DOOR CLOSERS Specification F3001 FIL Hand Fig 1 Fixing F3002 FIR Hand Fig 1 Fixing F3003 FOL Hand Fig 616 Fixing F3004 FOR Hand Fig 616 Fixing Power/Door Weight All available in the following F3001 FIL Electro-Magnetic Door Closer * Fig 1 Fixing - FIL Complete F3002 FIR Electro-Magnetic Door Closer * Fig 1 Fixing - FIR Complete F3003 FOL Electro-Magnetic Door Closer * Fig 616 Fixing - FOL Complete Fig 1 EN4-80kg Door Weight EN5-100kg Door Weight EN6-120kg Door Weight F3004 FOR Electro-Magnetic Door Closer * Fig 616 Fixing - FOR Complete Door Size EN4 Up to 1100mm Wide EN5 Up to 1250mm Wide EN6 Up to 1400mm Wide All Models l Adjustable Closing Speed l Adjustable Latching Speed l Adjustable Hold-Open Point between 75 and 180 l Operating Voltage 24v DC l Power Input 2W F3005 Free-Swing Arm Assembly F3006 As F3001 with Integral Smoke Detector* F3007 As F3002 with Integral Smoke Detector* F3008 As F3003 with Integral Smoke Detector* F3001/F3002 Models Complete with Test Switch/Junction Box To attain 180 opening - 30mm min Projecting Hinges are Required Fig 616 FIL F103 l Full Metal Cover with Matching Arm l Third Party Tested to BS EN1155 l Classification EN4 EN5 EN l Certifire Approved Ref CF 117 F3009 As F3004 with Integral Smoke Detector* *State Power Size Required Handing Diagrams On Page IV For Power Supply Unit See Page K140 X F3003/F3004 Models Transom Fixed so Power Supply Direct off Door To attain 180 opening - X Dimension must be less than 70mm FOL 73mm 332mm SSS PSS PB PBZ GSS PAA 50mm

113 DOOR CONTROLS CONCEALED F4000 Series Concealed Cam Action Overhead Door Closers 515 (512) Specification F4001 Reversible F4002 Reversible Power F4001 EN2 to 4 Adjustable (76.5) 51 (45) 20 F4002 EN3 to 6 Adjustable Door Size F4001 up to 1100mm wide (44mm min Timber Thickness) F4002 up to 1400mm wide (54mm min Timber Thickness) Door Weight F4001 up to 100kg F4002 up to 180kg All Models l Adjustable Closing Force l Adjustable Closing Speed l Adjustable Latching Speed l Damping 120 max opening angle l Third Party Tested to BS EN1154 F4001 Classification F4002 Classification 3 8 4/ / l Certifire Approved Ref CF 140 SSS PSS PB PBZ GSS SE F4001 Concealed Cam Action Door Closer Body Only Power EN 2 to 4 F4002 Concealed Cam Action Door Closer Body Only Power EN 3 to 6 F4003 Standard Slide Arm and Channel F4004 Electro-Mechanical Hold-Open Arm and Channel, 24V DC, Power Input 1.4W Adjustable Release Force Third party Tested to BS EN1155 F4005 Mechanical Selective On/Off Hold Open Unit (Not to be Used on Fire Doors) F Minute Intumescent Pack for Fire Door Specification F Minute Intumescent Pack Details as F4006 Length/Width/Height of Mortice for Body & Channel must be increased by 2mm to accommodate F4006/F4007 State Power Size 39.5 (32) R (70.5) F4008 Slide Channel c/w Integral Door Co-ordinator for Pairs of Rebated Doors to Ensure Correct Closing Sequence F4009 Slide Channel c/w Integral Door Co-ordinator with Electro-mechanical Hold-open Facility for Pairs of Rebated Held Open Fire Doors to Ensure Correct Closing Sequence. F4010 Routing Jig Kit (Details upon Application) For Power Supply Unit See Page K (93) 105 (102) (242) (320) 352 (338) (35) F4001 Dims in ( ) F4002 F4004 F104

114 DOOR CONTROLS UNDERFLOOR F5001 Floor Spring Unit and Cement Box c/w Standard Spindle - Non Hold Open F5002 Floor Spring Unit and Cement Box c/w Standard Spindle - 90 Hold Open (Not for Use on Fire Doors) 2 1. Closing Force Adjustment 2. Closing Speed Adjustment 3. Latching Speed Adjustment F105 F5000 Series Floor Springs with Power Adjustment and Backcheck l Adjustable Closing Force l Adjustable Closing Speed Between l Adjustable latching Speed Between 15-0 F5003 Floor Spring Unit and Cement Box c/w Standard Spindle Hold Open (Not for use on Fire Doors) F5004 Cover Plate 308 x 105mm Specification l All Models universal for Single or Double Action Doors l Power EN1 to 4 Adjustable l Door Size up to 1100mm Wide Internal and 1000mm Wide External l Door Weight up to 120kg l Mechanical Backcheck l Third Party Tested to BS EN1154 l Classification 3 8 4/ l Certifire Approved Ref CF 127 SSS PSS PB PBZ GSS See page F109/F110 for Accessories

115 DOOR CONTROLS UNDERFLOOR F6000 Series Floor Springs with Backcheck, Adjustable Delayed Action and Mechanical Hold-open Facility Specification All Models Universal for Single or Double Action Doors l Power F6001 EN3 F6002 EN4 F6003 EN6 l Door Size F6001 up to 950mm Wide F6002 up to 1100mm Wide F6003 up to 1400mm Wide l Door Weight up to 300kg l Adjustable Closing Speed l Mechanical Backcheck l Hold-open, Adjustable Between l Adjustable Delayed Action l Third Party Tested to BS EN1154 F6001 Classification F6002 Classification F6003 Classification SSS PSS PB PBZ GSS F6001 Floor Spring Power EN3 Unit and Cement Box c/w Standard Spindle, On/Off Adjustable Hold-open (Not for Use on Fire Doors) F6002 Floor Spring Power EN4 Unit and Cement Box c/w Standard Spindle, On/Off Adjustable Hold-open (Not for Use on Fire Doors) F6003 Floor Spring Power EN6 Unit and Cement Box c/w Standard Spindle, On/Off Adjustable Hold-open (Not for Use on Fire Doors) F6004 Cover Plate 358 x 105mm F6005 Floor Spring Dummy Unit and Cement Box c/w Standard Spindle (Not for Use on Fire Doors) See page F109/F110 for Accessories 1. Closing Speed Adjustment 2. Hold Open/Delayed Action Adjustment 3. Adjustment to Start of the Hold Open Range or the End Point of the Delayed Action Range F106

116 DOOR CONTROLS UNDERFLOOR F7001 Floor Spring Power EN4 Unit and Cement Box c/w Standard Spindle 2 1. Closing Speed Adjustment 2. Latching Speed Adjustment F107 F7000 Series Floor Springs with Backcheck for Fire and Smoke Doors Specification All Models Universal for Single or Double Action Doors l Power F7001 EN4 l Door Weight up to 300kg l Adjustable Closing Speed l Mechanical Backcheck l Adjustable Latching Speed l Third Party Tested to BS EN1154 F7001 Classification F7002 Classification F7003 Classification F7002 Floor Spring Power EN5 Unit and Cement Box c/w Standard Spindle F7003 Floor Spring Power EN6 Unit and Cement Box c/w Standard Spindle F7004 Cover Plate 358 x 105mm F7002 EN5 F7003 EN6 l Door Size F7001 up to 1100mm Wide F7002 up to 1250mm Wide l Certifire Approved Ref CF 128 SSS PSS PB PBZ GSS F7005 Floor Spring Dummy Unit and Cement Box c/w Standard Spindle (Not for use on Fire Doors) See Page F109/F110 for Accessories F7003 up to 1400mm Wide

117 DOOR CONTROLS UNDERFLOOR ELECTRO-MAGNETIC HOLD OPEN/FREE SWING F8003 Electro-Magnetic Hold Open, Power EN6 Floor Spring Unit and Cement Box c/w Standard Spindle 1. Closing Speed Adjustment F108 F8000 Series Floor Springs with Electro-Magnetic Hold Open/Free Swing Facility Specification F8001/F8002/F8003 Universal for Single or Double Action Doors F8004/F8005/F8006 Door Hand Required l Power F8001/F8004 EN4 F8002/F8005 EN5 F8003/F8006 EN6 l Door Size F8001/F8004 up to 1100mm Wide F8002/F8005 up to 1250mm Wide F8003/F8006 up to 1400mm Wide l Door Weight up to 300kg l Adjustable Closing Speed F8001/F8002/F8003 l Mechanical Backcheck l Adjustable Latching Speed l Certifire Approved Ref CF128 l Operating Voltage - 24v DC l Power Input - 2.3W SSS PSS PB PBZ GSS F8001 Electro-Magnetic Hold Open, Power EN4 Floor Spring Unit and Cement Box c/w Standard Spindle F8002 Electro-Magnetic Hold Open, Power EN5 Floor Spring Unit and Cement Box c/w Standard Spindle F8004 Electro-Hydraulic Free Swing, Power EN4 Floor Spring Unit and Cement Box c/w Standard Spindle (Door Hand Required) F8005 Electro-Hydraulic Free Swing, Power EN5 Floor Spring Unit and Cement Box c/w Standard Spindle (Door Hand Required) F8006 Electro-Hydraulic Free Swing, Power EN6 Floor Spring Unit and Cement Box c/w Standard Spindle (Door Hand Required) F8007 Cover Plate 358 x 105mm F8008 Underfloor Door Co-ordinator System for Pairs of Rebated Fire Doors to Ensure Correct Closing Sequence 2. Latching Speed Adjustment 3. Plug Connector 4. Electrical Gland Connector See Page F109/F110 for Accessories For Power Supply Unit See Page K140 Handing Diagrams on Page IV

118 DOOR CONTROLS ACCESSORIES F9001 Double Action Top Centre c/w Cover Strip (Timber Fixing) F9003 Single Action Top Centre 36mm offset (Timber Fixing) F9006 Single Action Top Centre 5mm offset (Timber Fixing) F9002 Double Action Bottom Strap (300kg max) (Timber Fixing) F9004 Single Action Bottom Strap 36mm offset (Timber Fixing) F9007 Single Action Bottom Strap 5mm offset (Timber Fixing) F109 F9005 Cover Caps for Single Action Straps F9003/F mm SSSP PCP PB PBZP PAA Certifire Approved Ref CF 128

119 DOOR CONTROLS ACCESSORIES F9008 Extended Spindle Inserts A B C F G H D E J K L M N F9011 Floor Pivot, 300kg max F9015 Concealed Reversible Stile Fixing Door Closer, Internal Latched Doors Only Up to 75kg. Door Locations Required for Specification 60mm Note - Standard Spindle Gives 8mm Door Clearance F9012 Floor Pivot, 300 kg max F9013 Floor Pivot, 200kg max 165mm F9009 Sealing Compound 0.5kg Qty, to fill Cavities between the Floor Spring Body and the Cement Box to Prevent Moisture Penetration, One Spring Quantity BRS SCP PCP F9016 Concealed Reversible Stile Fixing Door Closer, Internal Latched Doors Only Up to 50kg. Door Locations Required for Specification F110 F9010 Underfloor Cavity Frames Heavy Gauge Mild Steel Frames to Raise Floor Spring Units up to Finished Floor Level Existing Floor Level to Finished Floor Level Dimension Required F9014 Cover Plate to Suit F9012 & F9013 SSS PSS PB PBZ BRS SCP PCP 150mm

120 F9017 Door Selector Suitable for Doors up to 1220mm Wide Tested to BS EN1158 F9019 Concealed Limiting Stay To Suite Single and Double Action Doors Prevents Doors Opening Past 90 DOOR CONTROLS ACCESSORIES F9033 Double Action Pivot Set For Use with F9032 Emergency Stop Doors Up to 80kg EG SSSP PCP PBP PBZP PAA F9018 Door Selector Suitable for Doors up to 1300mm Wide F9032 Emergency Release Door Stop Inward Opening Doors Can Open Out In The Event of an Emergency F9034 Heavy Duty Double Action Pivot Set For Use With F9032 Emergency Stop Doors Up to 120kg SCP PCP PB F111 SCP PCP PB SE SSS SSS

121 DOOR CONTROLS MAGNETIC DOOR HOLDERS F9022 Flush Fixing 100N Holding Force F9023 Flush Fixing 500N Holding Force F9028 Swivel Armature F9031 Floor Mounting Bracket for use with F9024, F9025, F9026, F9027 F9024 Wall/Floor Fixing 100N Holding Force F9029 Fixed Armature F9025 Wall/Floor Fixing 500N Holding Force F112 Fusion Hold Open Magnets Fail Safe, Holds Door Open Until Released by Alarm Activation or Power Failure Polarity Reversal Protection Operating Voltage 12/24V DC Power Consumption 1.5W Specify Magnet and Relevant Armature Plate to Suit Door Details For Power Supply Unit See Page K140 SSS PSS WE F9026 Wall/Floor Fixing 100N Holding Force c/w Test Switch F9027 Wall/Floor Fixing 500N Holding Force c/w Test Switch F9030 Heavy Duty Armature with Buffer Zone

122 G SECTION EMERGENCY EXIT HARDWARE TOUCH BAR PANIC HARDWARE CONCEALED BOLTS SURFACE BOLTS G113

123 EPCS SSSP PSSP PBP PBZP CC EMERGENCY EXIT HARDWARE G205 Push Pad Single Panic Bolt lnon Handed lsuits Doors Up to 2440mm High lconforms to BS EN 179 lclassifaction B G230 Push Pad Panic Latch lreversible lconforms to BS EN179 lclassifaction B G114 G220 Cross Bar panic Latch lreversible lsuits Doors Up to 1220mm Wide lconforms to BS EN1125 lclassifaction G200 Cross Bar Single Panic Bolt lreversible lsuits Doors Up to 2440mm High x 1220mm Wide lconforms to BS EN 1125 lclassifaction A A Other Door Sizes to order

124 EPCS SSSP PSSP PBP PBZP CC G215 Push Pad Mortice Latch Actuator lreversible lfor Use With Fusion Auto Deadlocking Mortice Night Latches lbsen Classifaction B G240 Outside Access Device lproviding Entry to Emergency Exit Doors lstandard Differ c/w 3 Keys lsuits Doors Up to 70mm Thick EMERGENCY EXIT HARDWARE G240MK As Above But Under Master Key lto Suit Building Security Cylinder Specified Seperately Both Above to Suit G200 Series Bolts G115 G225 Cross Bar Panic Mortice Latch Actuator lreversible lfor Use With Fusion Auto Deadlocking Mortice Night Latches lsuits Doors Up to 1220mm Wide lbsen Classifaction A G235 Box Keep Striking Plate For use With G220 and G230 When Specified for Pairs of Rebated and Non-Rebated Doors Other Door Sizes to order

125 SSS PSS PB PBZ EMERGENCY EXIT HARDWARE TOUCH BAR ACTION G301A Touch Bar Panic Latch c/w Deadlocking Stainless Steel Latchbolt Includes Hold Back Facility Reversible Suits Doors 890 to 1220mm Wide Up to 65mm Thick Conforms to BS EN1125 Certifire Approved Ref CF279 G301B Suits Doors 585 to 915mm Wide G301C Suits Doors 390 to 585mm Wide G303A Touch Bar Surface Panic Bolt c/w Pullman Deadlocking Latchbolts Includes Hold Back Facility Reversible Conforms to BS EN1225 Suits Doors 890 to 1220mm Wide x 2440mm High Up to 65mm Thick Certifire Approved Ref CF279 G303B Suits Doors 585 to 915mm Wide x 2440mm High Up to 65mm Thick G303C Suits Doors 390 to 585mm Wide x 2440mm High Up to 65mm Thick G116 Other Door Heights to Order G302 Overlap Striking Plate For Use With G301A/B/C When Specified for Use on Pairs of Rebated Doors

126 SSS PSS PB PBZ SIL EMERGENCY EXIT HARDWARE TOUCH BAR ACTION G304A Touch Bar Concealed Panic Bolt c/w Pullman Deadlocking Latchbolts Includes Hold Back Facility Reversible Suitable For Use on Metal/PVC/Aluminium Doors Conforms to BS EN1125 Suits Doors 890 to 1220mm Wide x 2440mm High Up to 65mm Thick Certifire Approved Ref CF279 G304B Suits Doors 585 to 915mm Wide x 2440mm High Up to 65mm Thick G304C Suits Doors 390 to 585mm Wide x 2440mm High Up to 65mm Thick G305A Touch Bar Surface Panic Bolt for Glass c/w Pullman Deadlocking Latchbolts Includes Hold Back Facility - Reversible - Glass Preparation Template Available Suits Doors 921 to 1285mm Wide x 2440mm High 10 & 12mm Thick Certifire Approved Ref CF279 G305B Suits Doors 610 to 978mm Wide x 2440mm High 10 & 12mm Thick G305C Suits Doors 457 to 673mm Wide x 2440mm High 10 & 12mm Thick G306 Outside Access Device c/w Knob Standard Differ c/w 3 Keys Key Removable Only When Locked G306MK As Above But under Master Key Cylinder to be Specified Seperately Both to Suit G300 Series Bolts G117 G307 Outside Access Device c/w Lever Standard Differ c/w 3 Keys Key Removable Only When Locked G307MK As Above But Under Master Key Cylinder to be Specified Seperately Both to Suit G300 Series Bolts

127 DOOR BOLTS AND SOCKETS G400 Lever Action Flush Bolt Specify Size Required A x 19mm B x 19mm C x 19mm D x 19mm E x 19mm Radius Ends Available Suffix RE F x 19mm G x 19mm H x 19mm J - Special length to order G401 Extended (25 To 40mm Adj) Throw Lever Action Flush Bolt Specify Size Required A x 19mm B x 19mm C x 19mm G405 Knob Slide Flush Bolt Specify Size Required A x 25mm B x 25mm C x 25mm G406 Extended (25 To 40mm Adj) Throw Knob Slide Flush Bolt 229 x 25mm G118 G408 Automatic Flush Bolts (Supplied in Pairs) Inactive Door Released Automatically When First Opening Door is Activated Intended For Use on Metal and Non Rebated Timber Doors G409 Foot Operated Door Holder 41mm Wide A - 100mm High B - 150mm High c/w Floor Socket Not For Use on Fire Doors G410 Straight Surface Bolt Specify Size Required A - 50 x 25mm J x 32mm B - 64 x 25mm C - 76 x 25mm D x 25mm E x 25mm F x 32mm G x 32mm H x 32mm K x 32mm L x 38mm M x 38mm N x 38mm O x 38mm P x 38mm Q x 38mm G415 Necked Surface Bolts A x 25mm B x 25mm C x 25mm D x 32mm E x 32mm F x 32mm G x 32mm H x 32mm G427 Angle Striking Plate SCP PCP SNP PNP PB PBZP

128 SCP PCP SNP PNP PB PBZP DOOR BOLTS AND SOCKETS G412 Knob Slide Surface Bolt 41mm Wide Specify Length Required A - 100mm F - 450mm B - 150mm G - 600mm C - 200mm H - Special Length D - 250mm to Order E - 300mm G416 Lever Action Flush Bolts to Suit Rebated Over Panels - Fixed to Door Edge Note Full Joinery Details Required for Specification A x 19mm B x 19mm C x 19mm D x 19mm E x 19mm F x 19mm G - Special Length to Order G420 Easy Clean Floor Socket Suits Wood & Stone G425 Sprung Dirt Excluding Socket Suits Wood & Stone G119 G413 Knob Slide Surface Bolt 33mm Wide Specify Length Required A - 100mm B - 150mm C - 200mm D - Special Length to Order G417 Lever Action Flush Bolt to Suit Rebated Over Panels - Fixed to Door Face Note Full Joinery Details Required for Specification A x 19mm B x 19mm C x 19mm D x 19mm E x 19mm F x 19mm G - Special Length to Order G426 Cross Strap Provides Extra Top Fixing When Bolt Fixed to Face of Door to Suit Bolts G400/G401/G405/G406 SSS

129 H SECTION DOOR INFORMATION SIGNAGE H120

130 SIGNAGE H501 Fire Door Keep Shut H502 Fire Door Keep Locked H507-76mm Ø Push H508-50mm Ø Push H512 Male Symbol H515 Disabled Symbol H121 H503 Keep Locked Shut H504 Fire Escape Keep Clear H509-76mm Ø Pull H510-50mm Ø Pull H513 Female Symbol H516 Baby Change Symbol H505 Fire Door Keep Locked Shut H506 Automatic Fire Door Keep Clear H511 W.C. H514 Unisex Symbol H517 Shower Symbol 76mmø Self Adhesive Signs - Suits Timber, Metal & Glass Doors SSS PSS PB PBZ GSS PAA Option Natural Background with Black Letters on Fire Signage Suffix Item Number NL Braille Version of Fusion Signage Available to Order All Other Statutory and Mandatory Signs Available

131 SIGNAGE H518 Mop & Bucket Symbol H521 Arrow to Right H524 Arrow Up or Straight H527 Telephone Symbol H530 Dry Riser H122 H519 Cloakroom Symbol H522 Arrow to Left H525 Arrow Down or Back H528 Private H531 Fire Hose Reel H520 First Aid Symbol H523 No Smoking Symbol H526 Electrical Warning Symbol H529 No Entry Symbol H532 To Customers Own Design 76mmø Self Adhesive Signs - Suits Timber, Metal & Glass Doors SSS PSS PB PBZ GSS PAA Braille Version of Fusion Signage Available to Order All Other Statutory and Mandatory Signs Available

132 J SECTION WASHROOM EQUIPMENT BATHROOM/WC FITTINGS DISABLED BATHROOM/WC FITTINGS J123

133 Technical Data Sheets Available SSS PSS WASHROOM EQUIPMENT J1001 Paper Towel Dispenser and 7.6 Litre Waste Container - Recessed 325 x 670 x 110mm J1002 Paper Towel Dispenser Box Concealed Within Wall Only Towel Aperture Visible 300 x 465 x 115mm J1003 Paper Towel Dispenser Surface Fixed 280 x 370 x 102mm J1004 Paper Towel Dispenser Surface Fixed 120 x 210 x 76mm J1005 Surface Fixed Warm Air Hand Dryer Conforms to ADA - Universal Voltage 100mm Projection 254 x 356 x 100mm J124 J1006 Sink Top Soap Dispenser 1 Litre Capacity - 100mm Spout J Litre Capacity - 100mm Spout J Litre Capacity - 150mm Spout J1010 Recessed Soap Dispenser 1.5 Litre Capacity 260 x 152 x 126mm J1011 Surface Fixed Soap Dispenser 1.2 Litre Capacity 205 x 120 x 135mm J1012 Surface Fixed Double Toilet Roll Dispenser 150 x 300 x 165mm J1013 Recessed Toilet Roll Holder J1014 As Above c/w Hood 160 x 160mm J1015 Double Recessed Toilet Roll Holder J1016 As Above c/w Hoods 320 x 160mm J Litre Capacity - 150mm Spout

134 Technical Data Sheets Available SSS PSS WASHROOM EQUIPMENT J1017 Baby Changing Station Easy Clean 100% High Density Polyethylene 550kg Load Capacity Safety Strap Easy Safety Closing Device Open - 570mm high x 920mm wide x 520mm deep Closed = 570mm high x 920mm wide x 100mm deep J1018 Wall Mounted Vandal Resistant Ash Tray c/w Fliptop Facility 240 x 235 x 245mm J1019 Wall Mounted Ash Tray c/w Pivot Rod for Waste Disposal 120 x 90 x32mm J125 J1020 Waste Bin 7.6 Litre Capacity 275 x 230 x 110mm J1021 Waste Bin 26.5 Litre Capacity 355 x 430 x 165mm J1022 Waste Bin 45.4 Litre Capacity 390 x 585 x 200mm

135 SSS PSS BATHROOM/WC FITTINGS J2001 Magnetic Soap Holder 55mm Projection J2002 Toilet Roll Holder 141 x 88 x 40mm J2003 Ash Tray 115 x 87mm J2004 Soap Tray Holder 152 x 76mm J2005 Toilet Roll Holder With Backplate 141 x 110mm J2006 Toothbrush Holder 102 x 36mm J2007 Tumbler Holder 115 x 87 x 92mm J126 J2010 Double Spare Toilet Roll Holder 252 x 40mm J2011 Upright Spare Toilet Roll Holder 62 x 94mm

136 SSS PSS BATHROOM/WC FITTINGS J2012 Single Towel Hanger 560 x 50mm J2013 Towel Hook 35mm Projection J2014 Mirror Supports Suits 3-4-6mm Glass 20 x 15mm J2015 Double Towel Hanger 560 x 100mm J2016 Towel Hook 35mm Projection J2017 Pivoting Towel Hanger 460 x 98 x 35mm J127 J2018 Towel Rack 232 x 40mm J2019 Towel Ring 230mm Ø J2020 Towel Shelf 520 x 280mm J2021 Glass Shelf c/w Glass 530 x 130mm J2022 Corner Shelf c/w Glass 230 x 230 x 325mm

137 SSS PSS BATHROOM/WC FITTINGS J2008 Toilet Brush and Holder 133 x 106 x 410mm J2009 Soap Dispenser 200 x 82mm 60mm Ø J128

138 SSS PSS White Epoxy Coated on Steel SSS c/w Grey Fusigrip Non-slip Sections PSS c/w Grey Fusigrip Non-slip Sections DISABLED BATHROOM/WC FITTINGS Grab Rail J x 35mm Ø J x 35mm Ø J x 35mm Ø Concealed Fixing Grab Rail J x 35mm Ø J x 35mm Ø J x 35mm Ø Concealed Fixing Grab Rail J x 35mm Ø J x 35mm Ø J x 35mm Ø Concealed Fixing Hinged Arm Support J mm Projection J mm Projection J mm Projection J mm Projection J mm Projection Above Supplied Without Toilet Roll Holder Unless Requested Backrest Rail J Without Cushion J With Cushion Concealed Fixing J129 J3017 DOC M Pack - Meets the Requirements of Part M3 to the Building Regulations and Conforms to BS5810, Concealed Fixing Set Includes 1 - J J J J J3030 J3018 Hinged Arm Support Heavy Duty Fixing Frame, to be used in Situations Where the Existing Wall is Weak Positive Fixing Spreads the Weight Load Over a Broad Surface To be used With J3034, J3035, J3036 or J3037 Fixings

139 SSS PSS White Epoxy Coated on Steel SSS c/w Grey Fusigrip Non-slip Sections PSS c/w Grey Fusigrip Non-slip Sections DISABLED BATHROOM/WC FITTINGS J Angled Grab Rail Concealed Fixing J Angled Grab Rail L/H Concealed Fixing J3021 As above R/H J3022 Bath Support Rail L/H Concealed Fixing J3023 As Above R/H J3024 Floor to Ceiling Pole c/w Loose Top Flange For Site Height Adjustment Concealed Fixing J3025 Floor To Ceiling Pole c/w Loose Top Flange For Site Height Adjustment and Side Rail Concealed Fixing J3026 WC Support Rail With Adjacent Wall Fixing Reversible Concealed Fixing J3027 Bath Support Rail Reversible Concealed Fixing J130 Fixing Kits To Be Specified With All Items J3028 Shower Support Rail Concealed Fixing J3029 Bath Support Rail Concealed Fixing J Grab Rail Fixings For All Situations Except Hollow Block Walls (For Two Roses) J Grab Rail Fixings For Hollow Block Walls (For Two Roses) J Hinged Arm Support Fixings to Brick J Hinged Arm Support Fixings to Aggregate Block Walls J Fixings For Use With J3018 Frame to Aggregate Block J Fixings For Use With J3018 Frame to Hollow Block J Fixings For Use With J3018 Frame to Aerated Block J Fixings For Use With J3018 Frame to Stud Partition

140 K SECTION ACCESS CONTROL K131

141 ELECTRO-MAGNETIC LOCKS K1000 Series - 275kg Holding Force - No Surge - 300mA@ 12 vdc Magnet Size x 44 x 38mm Strike Size x 42 x 13mm Vandal Resistant No Residual Magnetism K1300 Series - 275kg Holding Force - Concealed Fixing - No Surge - 12 vdc Magnet Size x 30 x 23mm Strike Size x 30 x 25mm Vandal Resistant No Residual Magnetism Self Aligning System K Open Out Door Fitting - Unmonitored K Open Out Door Fitting - Monitored K Open In Door c/w Z Bracket - Unmonitored K Open In Door c/w Z Bracket - Monitored K L Bracket to Suit Flush Frame Detail K S Bracket to Suit Full Height Door Detail K Brackets for Glass Door Fitting K Double Door Full Length Housing K Concealed Fixing 12 vdc - Unmonitored K Concealed Fixing 12 vdc - Monitored K Minute Intumescent Protection Pack K Minute Intumescent Protection Pack K132 K1200 Series - 545kg Holding Force - No Surge - 12 vdc Magnet Size x 76 x 44mm Strike Size x 71 x 13mm Vandal Resistant No Residual Magnetism K1400 Series - 454kg Holding Force - Concealed Fixing - No Surge - 12 vdc - 24 vdc Dual Voltage In One Unit Magnet Size x 38 x 29mm Strike Size x 36 x 13mm Vandal Resistant No Residual Magnetism Self Aligning System K Open Out Door Fitting - Unmonitored K Open Out Door Fitting - Monitored K Open In Door Fitting c/w Z Bracket - Unmonitored K Open In Door Fitting c/w Z Bracket - Monitored K L Bracket to Suit Flush Frame Detail K S Bracket to Suit Full Height Door Detail K Brackets for Glass Door Fitting K Double Door Full Length Housing K External Universal Conduit Fitting K Concealed Fixing Dual Voltage - Unmonitored K Concealed Fixing Dual Voltage - Monitored K Surface Mounting Kit K Minute Intumescent Protection Pack K Minute Intumescent Protection Pack

142 PNEUMATIC SECURITY BOLTS K1501 Floor Mounted Lock with 13mm Saw-Resistant Deadbolt and Nylon Lined Keepers To Suit Solid, Hollow, Metal or Framed Doors c/w Door Position Sensing K1502 Double Unit for Pairs of Doors K1601 Floor Mounted Lock with Nylon Lined V Wedge Deadbolts To Suit Unframed Toughened Glass Doors c/w Door Position Sensing K1602 Double Unit for Pairs of Doors K133 K1701 Surface Mounted Lock with 13mm Saw Resistant Deadbolt and Strike Plate K1702 Double Unit for Pairs of Doors K1801 Concealed Through Door Fixing Deadbolts Suitable for Hollow, Metal or Extruded Section Doors, to Provide Top and Bottom Locking Complete Set for Single Door K1802 Double Unit for Pairs of Doors l Can be Used on Single and Double Action Doors l Fixing to Floor, Transom or Both l Failsafe via Connection to Alarm/Security System l Also Available With Pneumatic Instead of Electric Reed Switches to Monitor Door Position for Use in Hazardous or Potentially Explosive Environments K1901 Compressor/Control Unit Required to Run System Built to Contract Specification

143 DIGITAL KEY PADS K2001 l Heavy Duty Cast Stainless Steel Key pad l Internal or External use K2201 l Medium Duty Stainless Steel Key pad l Internal use K2301 l Wire Free Key Pad l Battery Powered Radio Transmitter l Vandal Resistant l 178 x 38 x 25mm l 12/24v AC or DC Dual Voltage Unit l Time Delay Adjustable From 1 to 99 Seconds l 4.8 metre Cable Included l Internal Alarm Facility After Misuse l Current Draw Rest: 12v 24v l Current Draw Max: 12v 24v l Standalone l 115 x 70 x 8mm l 12/24 vdc l Time Delay Adjustable From 1 to 99 Seconds l Either Flush Fixed or Surface Mounted With Box Supplied l Alarm Function Lock Out Facility Included l Current Draw 12 or 24 vdc l Black ABS Tamper Proof Construction l 73 x 80 x 33mm l 9V Alkaline Battery Power Gives 5000 Commands l Internal or External Use l Up to 70 metre Operating Range l Avoids All Cable Runs K2302 l RF Receiver l Up to 70 metre Operating Range K134 l For Use With K2301 K2002 l Stainless Steel Heavy Duty Spy Shield l Prevents Visual Code Theft

144 CARD SWIPES AND READERS K3001 l SCP Card Swipe Reader l Internal or External Use l Vandal Resistant l 34 x 34 x 89mm l 5 metre Cable Included l Up to 10,000 Users l 12vDC K3201 l Proximity Reader l 500 User Capacity l Stainless Steel Reader Head K3202 l Proximity Key Cards K3301 l Transmitter Key l Up to 70 metre Operating Range K3302 l RF Receiver l Up to 70 metre Operating Range l For Use With K3301 K3002 l Controller For K3001 l Located Within Power Supply Unit K3203 l Proximity Key Fobs K135 K3003 l Set Up Swipe Card Pack l Includes 10 User Cards and Programming Cards c/w Manual Log Book K3004 l Additional Swipe Cards l Various Colours Available for Zone Identification K3204 l Hand Held Programmer l Adds New users l Deletes Existing Users l RF Mini-Transmitter Operation

145 ELECTRONIC LOCKING SYSTEM A Complete Stand Alone Wire Free Locking System Utilising Standard Euro-Profile Mortice Lock Cases Can Be Used as Part of a Standard Master Key Suite using Mechanical Key Operation Where a Higher Security Control is Required to a Limited Number of Doors, with the Facility to Increase or Relocate the Electronic Cylinder as Required l Key Protection Through Copy-Protected Passive Transponder Technology l Wire Free Installation l Limitless Expansion l 3-Stage Low Battery Warning l Equal to Insurance Classed Cylinders l Easy Change Individual Authorisation l Easy Change Locking Hierarchies K136 Fnishes SNP PCP PB PGP K Electronic Knob Cylinder 30/30mm c/w Master ID Card - Programme Card - Assembly Tool and Four Transponder Fobs K Additional Electronic Knob Cylinders Only K Transponder Fobs K Transponder Cards K Transponder Fob and Mechanical Key In One K Hand Held Programming Unit Including Software and Charger K RS232 Connecting Cable for K3406 to PC K PC Database for K3406 K Spare Battery

146 ACTIVATING SWITCHES K mm Ø Bollard c/w Curved Switch Surface Mount 1067mm High K mm Ø Bollard c/w Curved Switch Inground Fixing 1372mm High, 305 Recessed K mm Ø Flush Switch c/w Box Disabled Symbol K x 44mm Flush Switch c/w Box Disabled Symbol K x 152mm Bollard c/w Switch Surface Mount 1067mm High K137 K mm Ø Flush Switch c/w Box Disabled Symbol + Push to Open K x 44mm Flush Switch c/w Box Disabled Symbol + Push to Open K x 152mm Bollard c/w Switch Inground Fixing 1372mm High, 305mm Recessed K mm Ø Flush Switch c/w Box Push to Open K x 44mm Flush Switch c/w Box Push to Open K mm Ø Flush Switch c/w Box Push to Exit PUSH TO EXIT K x 44mm Flush Switch c/w Box Push to Exit SSS PSS PB PBZ K mm Ø Flush Switch c/w Box Press to Open Door PRESS TO OPEN DOOR K x 44mm Flush Switch c/w Box Press to Open Door K mm Ø Flush Switch c/w Box To Customers Own Design K x 44mm Flush Switch c/w Box To Customers Own Design

147 ELECTRIC STRIKES K4000 Series Electric Strike to Suit All Fusion Mortice Nightlatches K4001 l Unmonitored l Failsafe/Failsecure Reversible l 450kg Load Pressure Release l Tamper Resistant l 12vDC Current Draw 45ma K5000 Series Electric Strike To Suit All Fusion Mortice Deadlocks K5001 l Unmonitored - Failsecure l 1000kg Load Pressure Release l Tamper Resistant l 12vDC Current Draw 45ma l Continuous Duty Operation K4005 l Surface Mounting Box to Suit All K4000 Series Strikes l Adapts Strike to Suit Cylinder Rim Nightlatch l Continuous Duty Operation l Horizontal Adjustment K4002 l Monitored Version of K4001 K4003 l 24vDC Current Draw 25 ma l Unmonitored K4004 l Monitored Version of K4003 K5002 l Monitored Version of K5001 K5003 l 24vDC Current Draw 25ma l Unmonitored - Failsecure K5004 l Monitored Version of K5003 K5005 l Failsafe Version of K5001 K5006 l Failsafe Version of K5002 K138 K5007 l Failsafe Version of K5003 K5008 l Failsafe Version of K5004 SSS PSS PB PBZ

148 HUMAN TOUCH/MOVEMENT CONTROL K6001 l Human Touch Sense Device l Automatically Releases Electronically Locked Doors by Touching Fusion Pull Handle or Push Plate With This Modification l Solid State Technology l The Easiest Answer for Allowing Free Egress l Choose any Fusion Pull Handle/Push Plate K6002 l Biometric Hand Reader l Complete Controller Providing Door Lock Operation l Request for Exit/Alarm Monitoring l 512 Users Standard l RS232 Printer Output l Stand Alone or Networked Capacity l 223mm wide x 296mm high x 217mm deep l Verifies the Size and Shape of a Person s Hand in Less Than 1 Second l 12/24vDC l 62 User Definable Time Zones K139 K6003 l Memory Expansion to 9728 Users K6004 l Memory Expansion to 32,512 users K6005 l Exit Motion Sensor l Passive Infared l 12/24 vdc l Build-in Relock Timer l Trailing Edge Trigger l 180 x 45 x 80mm

149 ACCESS CONTROL Fusion Key Switches K7017 l Momentary Key Switch l Tamper Proof l 12/24vDC 5 Amp Rated K7018 l Alternate Action Key Switch l Tamper Proof l 12/24vDC 5 Amp Rated K7023 l Green Break Glass Box l Surface Mounted K7024 l Pack of 5 Replacement Glasses Fusion Push Buttons K7026 l Narrow Stile l Push to Open K7027 l Narrow Stile l Push to Open l Illuminated K7019 l Momentary Key Switch l Narrow Stile l Tamper Proof l 12/24vDC 5 Amp Rated K7028 l MK Back Box Stile l Push to Open l Illuminated K140 K7020 l Alternate Action Key Switch l Narrow Stile l Tamper Proof l 12/24vDC 5 Amp Rated Note K7017 to K7022 Key Switches can be Part of A Master Key Suite, Suffix MK to Part Numbe and Specify Cylinder Separately K7021 l Euro Momentary Key Switch l Tamper Proof l 12/24vDC 5 Amp Rated K7022 l Euro Alternate Action Key Switch l Tamper Proof l 12/24vDC 5 Amp Rated K7025 l Power Supply Unit l Individually Built to Suit Hardware Specification Options Available l BB - Battery Back Up l FR - Fire Relay (Alarm Interface) l TU - Timer Unit (Fully Adjustable) l IC - Interlock Control (Security Package) SSS PSS PB PBZ

150 ACCESS CONTROL K9000 Series Digital Mechanical Door Locks K9001 Standard Basic Unit K8001 l Concealed Armoured Door Loop l 120 Opening Angle Max K8002 l To Suit Doors 120 to 180 Opening Finish PCP K8003 Face Fixed Armoured Door Loop Suits Double Action Doors Finish SE K9002 Unit with Key Bypass K9003 Unit with Passage Set Option by Inside Turn Snib K9004 Unit with Passage Set Option by Inside Key Cylinder K9005 Unit with Key Bypass and Passage Set Option by Inside Turn Snib K141 K9006 Unit with Key Bypass and Passage Set Option by Inside Key Cylinder K9007 Spy Shield Prevents Visual Code Theft K mm Rebate Component K mm Rebate Component K8004 Double Action Top Centre Drilled for Cables l 70mm Backset Standard l 111mm Minimum Door Stile Required l Concealed Bolt Fixings l Suits Doors 35 to 57mm Thick l SCP or PB l Heavy Duty Commercial Quality K mm Backset Extension K mm Backset Extension

151 L SECTION ENTRANCE DOOR FITTINGS L142

152 SSS PSS PB PBZ GSS ENTRANCE DOOR FITTINGS Ball Design Centre Door Knob c/w Anti-Theft Locator Pin L101-50mm Ø L102-63mm Ø L103-75mm Ø L104-90mm Ø Index Design Centre Door Knob c/w Anti-Theft Locator Pin L105-50mm Ø L106-63mm Ø L107-75mm Ø L108-90mm Ø Shark Design Centre Door Knob c/w Anti-Theft Locator Pin L109-50mm Ø L110-63mm Ø L111-75mm Ø L112-90mm Ø Letter Plates - Sprung Flap L x 100mm o/a 250 x 50mm Aperture L x 100mm o/a 300 x 50mm Aperture L x 125mm o/a 300 x 75mm Aperture L128 - Intumescent Aperture Liner Inner Letter Flap Tidies L x 100mm o/a to Suit L113 L x 100mm o/a to Suit L114 L x 125mm o/a to Suit L115 L143 L x 86mm Bell Push L x 50mm Bell Push L121-50mm Ø Bell Push L122-75mm Ø Bell Push L x 2mm Pin Fix Numerals/Letters L x 2mm Pin Fix Numerals/Letters L Door Viewer Suits Doors Up to 54mm Thick c/w Shutter L Door Viewer Suits Doors Up to 54mm Thick c/w Shutter L127 Door Knocker 140 x 120 x 28mm

153 M SECTION GLASS FITTINGS M144

154 Specify Glass Thickness SSS PSS PB PBZP GLASS FITTINGS Glass Preparation Templates Available M001 Top Patch M002 Top Patch With Pivot Fixing Plate to Let Into Ceiling M003 Overpanel Patch M004 Overpanel Patch With Stop Insert M145 M005 Bottom Patch M006 Overpanel Patch With Blanking Insert M007 Patch for Overpanels and Side Panel M008 Patch for Overpanels and Side Panel c/w Stop Insert

155 Specify Glass Thickness SSS PSS PB PBZP GLASS FITTINGS Glass Preparation Templates Available M009 Patch for Overpanels and Side Panels With Fin Fitting Inside M010 Double Overpanel Patch With Fin Fitting Inside M011 Patch for Overpanels and Side Panel With Fin Fitting On Both Sides M012 Patch for Overpanels and Side Panel c/w Blanking Insert M146 M013 Overpanel Connector With Fin Fitting M014 Overpanel patch With Angled Connector 135 M015 Overpanel Patch With Angled Connector 90 M016 Threaded Rod M8 With Plug for Overpanel Patches M017 Wall Anchor With M8 Thread for Overpanel Patches

156 Specify Glass Thickness SSS PSS PB PBZP GLASS FITTINGS Glass Preparation Templates Available M018 Centre Euro Profile Lock Patch M019 Centre Lock Strike Patch M020 Overpanel Lock Strike Patch M021 Overpanel Lock Strike Patch c/w Stop Insert M147 M022 Double Overpanel Lock Strike Patch M023 Overpanel Connector c/w Two Stop Inserts and Two Blanking Inserts M024 Corner Euro Profile Lock Patch M025 Lock Striking Plate

157 Specify Glass Thickness SSS PSS PB PBZP GLASS FITTINGS Glass Preparation Templates Available M026 Overpanel and Side Panel Lock Strike Patch M027 Overpanel Lock Strike Patch with Angled Connector 90 c/w Stop Insert M028 Overpanel and Side Panel Lock Strike Patch with Fin Fitting M029 Overpanel and Side Panel Lock Strike Patch with Fin Fitting Both Sides M148 M030 Patch for Overpanel and Side Panel c/w Stop Insert and Two Blanking Inserts M031 Side Panel Patch c/w Fixing Plate *M040 76mm High Rail c/w Top Locking *M mm High Rail c/w Top Locking *State length required *M042 76mm High Rail c/w Floor Locking *M mm High Rail c/w Floor Locking

158 Specify Glass Thickness SSS PSS PB PBZP GLASS FITTINGS Glass Preparation Templates Available *M050 76mm High Top Rail c/w 15mm Insert *M mm High Top Rail c/w 15mm Insert *M052 76mm High Bottom Rail c/w Floor Spring Insert *M mm High Bottom Rail c/w Floor Spring Insert M149 M060 Centre Latch Patch for Fusion Lever Handles Note: Suffix Lever Handle Design Number with G to Denote Glass Fixing Adaption M061 Centre Lock Patch for Fusion Lever Handles and Cylinder *State length required M062 Centre Strike Patch for Double Doors or Panels

159 N SECTION LIGHT SWITCHES AND SOCKETS N150

160 Fusion Switch and Socket Plates are Square Cornered with Hexhead Fixings SSS PSS PB PBZ Single Plate Size 86x86mm Double Plate Size 146x86mm SWITCHPLATES Rocker Switches N Gang 2 Way Rocker Switch 6 amp N Gang 2 Way Rocker Switch 6 amp N Gang 2 Way Rocker Switch 6 amp N Gang 2 Way Rocker Switch 6 amp N Gang 2 Way Rocker Architrave Switch 6 amp Dimmer Switches N Gang 2 Way Rocker Architrave Switch 6 amp N151 N Gang 2 Way Dimmer Switch 250W N Gang 2 Way Dimmer Switch 250W N Gang 2 Way Dimmer Switch 400W Low Voltage N Gang 2 Way Switch 250W N Gang 2 Way Dimmer Switch 250W N Gang 2 Way Dimmer Switch 400W N Gang 2 Way Dimmer Switch 400W N W Low Voltage N W Low Voltage N W Low Voltage N W Low Voltage

161 Fusion Switch and Socket Plates are Square Cornered with Hexhead Fixings SSS PSS PB PBZ Single Plate Size 86x86mm Double Plate Size 146x86mm SWITCHPLATES AND SOCKETS Dolly Switches N gang 2 Way Dolly Switch 20 Amp N Gang 2 Way Dolly Switch 20 Amp N Gang 2 Way Dolly Switch 20 Amp N Gang 2 Way Dolly Switch 20 Amp Plug Sockets N Gang 2 Way Dolly Switch 20 Amp 146x146mm N152 N4001 Single 13 Amp Switched Socket N4002 Double 13 Amp Switched Socket N4003 Single 5 Amp Unswitched Socket N4004 Single 13 Amp Unswitched Floor Socket c/w Sprung Flap N4005 Double 13 Amp unswitched Floor Socket c/w Sprung Flap

162 Fusion Switch and Socket Plates are Square Cornered with Hexhead Fixings SSS PSS PB PBZ Single Plate Size 86x86mm Double Plate Size 146x86mm SOCKETS N5001 Single Co-Axial Socket N5002 Double Co-Axial Socket N5003 Master Telephone Outlet N5004 Slave Telephone Outlet N5005 RJ45 Computer Outlet Single N153 N5006 RJ45 Computer Outlet Double N Amp DP Water Heater c/w Neon N Amp Switched Spur N Amp Cooker Switch N Amp Cooker Switch c/w Neon N5010 Shaver Socket Outlet v Dual Voltage

163 P SECTION LOW ENERGY OVERHEAD AUTOMATIC DOOR OPERATORS LOW ENERGY UNDERFLOOR AUTOMATIC DOOR OPERATORS P154

164 LOW ENERGY OVERHEAD AUTOMATIC DOOR OPERATORS Push Side 100. Pull Side 100. l Fully Adjustable Spring Strength Opening Speed Closing Speed door stop door rail variable drive arm 265 door stop Max 30 door rail Drive channel 15mm underside box to underside of frame. Latching Speed l Designed to Conform to BS7036 Parts 1 and 4 l Third Party Tested to CE and EMC Requirement l Full Metal Cover and Matching Arm l Activation Options Include Fusion Push Buttons Door opening direction Remote Controls P155 Key Switches Activating Switches Card Swipes Digital Key Pads Door opening direction Proximity Readers P1001 Door Operator Push Side Transom Mounted Clockwise Closing P2001 Door Operator Pull Side Transom Mounted Clockwise Closing Touch Sensitive Pull Handles and Push Plates See Section K P1002 Door Operator Push Side Transom Mounted Anti-Clockwise Closing P2002 Door Operator Pull Side Transom Mounted Anti-Clockwise Closing Note P5004 PSU/Control Box and P5005 Compressor are Required to Run System SSS PSS PB PBZ

165 LOW ENERGY OVERHEAD AUTOMATIC DOOR OPERATORS Pull Side l Fully Adjustable Spring Strength Opening Speed Closing Speed Latching Speed l Designed to Conform to BS7036 Parts 1 & 4 l Third party Tested to CE and EMC Requirement l Full Metal Cover and Matching Arm l Activation Options Include Fusion P3001 Door Operator Pull Side Door Mounted Clockwise Closing P3002 Door Operator Pull Side Door Mounted Anti-Clockwise Closing P4001 Door Operator Concealed Transom Mounted Clockwise Closing c/w Track and Channel P4002 Door Operator Concealed Transom Mounted Anti-Clockwise Closing c/w Track and Channel Push Buttons Remote Controls Key Switches Card Swipes Digital Key Pads Activating Switches Proximity Readers Touch Sensitive Pull Handles and Push Plates See Section K Note P5004 PSU/Control Box and P5005 Compressor are Required to Run System SSS PSS PB PBZ P156

166 LOW ENERGY UNDERFLOOR AUTOMATIC DOOR OPERATORS FFL Centre Line of Doors l Fully Adjustable Spring Strength Opening Speed Closing Speed Latching Speed l Designed to Conform to BS7036 Parts 1 & Conduit to compressor control location. l Third party Tested to CE and EMC Requirement l Activation Options include Fusion Concrete. Drain hole in base of box for soakaway. Diameter 25mm conduit containing 6mm O/D Nylon Air Pipe, Push Buttons Remote Controls Key Switches Card Swipes Digital Key Pads Activating Switches Proximity Readers Touch Sensitive Pull Handles and Push Plates See Section K P157 P5001 Underfloor Operator for Single Door (Single Action) P5002 Underfloor Operator for Double Doors (Single Action) P5003 Cover Plate Tray for Retaining Existing Floor Finish P5004 Power Supply/Control Box Built to Suit Contract Specification Requires 230v 3 Amp Switched and Fused Spur P5005 Compressor - Size to Suit Contract Specification Requires 230v 3 Amp Switched and Fused Spur Fusion Low Energy Underfloor Automatic Door Operators are the Perfect Answer for Providing Unimpeded Access for People With Disabilities Without Compromising Building Aesthetics

167 R SECTION PORTHOLE VISION FRAMES DOOR SEALS AUTOMATIC DROPSEALS P158

168 PORTHOLE VISION FRAMES R to 46mm Thick Doors R to 56mm Thick Doors l 550mm Cutout l 500mm Visible Light l 525mm Glass Diameter l 585 mm Outside Frame l 1729mm Circumference Glazing Tapes R mm Thick x 9.5mm Wide For Non Fire Rated Doors R mm Thick x 9.5mm Wide For All Fire Doors Aperture Liners R mm Thick x 44mm Wide For 30 Min Fire Doors R to 46mm Thick Doors R to 56mm Thick Doors l 450mm Cutout l 400mm Visible Light l 425mm Glass Diameter l 485 mm Outside Frame l 1415mm Circumference R to 46mm Thick Doors R to 56mm Thick Doors l 350mm Cutout l 300mm Visible Light l 325mm Glass Diameter l 385 mm Outside Frame l 1100mm Circumference R mm Thick x 54mm Wide For 60 Min Fire Doors Glass (State Which Porthole Size) R mm Thick Laminated Clear Safety Glass (Non Fire Rated) R1073-6mm Thick Georgian Wired Clear Safety Glass (60 Min Fire Rated) R1074-6mm Thick Clear Fire Resistant Glass (60 Min Fire Rated) *R mm Thick Laminated Frosted Safety Glass (Non Fire Rated) *R1076-6mm Thick Frosted Fire Resistant Glass (60 Min Fire Rated) R159 R to 46mm Thick Doors R to 56mm Thick Doors l 250mm Cutout l 200mm Visible Light l 225mm Glass Diameter l 285 mm Outside Frame l 785mm Circumference *Suffix Part No With Relevant Letter From List to Denote Image Required. A - Male B - Female C - Unisex D - Disabled E - WC F - Baby Change G - Shower H - Telephone J - Cloakroom

169 SAA DOOR SEALS R mm High Heavy Duty Threshold Strip A - 914mm C mm B mm D mm (12.7) (5.1) (3.2) #6 x (9.1) SMS (1.9) (8.9) R2005 Frame Seal Surface Fixed 14 x 9mm A - 914mm B mm C mm D mm (127.0) Solid Neoprene (14.4) R2002 6mm High Heavy Duty Threshold Strip A - 914mm C mm B mm D mm (3.2) Solid Neoprene (3.2) #6 x (12.7) SMS (1.3) R2006 Frame Seal Concealed Fixed 22 x 13mm A - 914mm B mm C mm D mm (6.4) (10.0) (127.0) Snap-on Cover (tamper proof) (23.4) R160 R x 94mm Heavy Duty Threshold Strip for External Outward Opening Doors A - 914mm C mm B mm D mm (12.7) (44.5) (3.2) (93.6) Neoprene (3.2) Solid Neoprene (2.4) Neoprene Range: (7.9) (23.2) Stainless Steel (12.7) Adjusting Screw 12.00" O.C. (31.8) Range: (7.9) #8 x (38.1) SMS R2007 Acoustic Jamb Fixed Adjustable Seal A - 914mm B mm C mm D mm R x 127mm Heavy Duty Threshold Strip For External Outward Opening Doors A - 914mm C mm B mm D mm (12.7) (44.5) (3.2) Neoprene (3.2) Adjusting Screw (14.3) Spring (20.1) Neoprene Adjusting Screw (20.1) #6 x (12.7) SMS Spring R2008 Meeting Stile Fixed Adjustable Seal 14 x 20mm A mm B mm C mm (127.0)

170 AUTOMATIC DOOR DROPSEALS (50.8) (1.6) R2009 Surface Fixed 51 x 15mm Light Duty A - 610mm B - 762mm C - 914mm D mm E mm F mm #8 x (31.8) SMS (3.3) Magnet Steel Plate (2.4) (48.3) R2011 Surface Fixed 48 x 23mm Heavy Duty A - 610mm B - 762mm C - 914mm D mm E mm F mm (2.2) #8 x (31.8) SMS (23.3) (48.3) R2013 Sound Protect Type Surface Fixed 48 x 23mm Heavy Duty A - 610mm B - 762mm C - 914mm D mm E mm F mm (15.0) Double Neoprene Seal (12.7) Max. Effective Drop (14.3) (25.4) 37.0) (1.6) (19.1) R2010 Mortice Fixed 37 x 15mm Light Duty A - 610mm B - 762mm C - 914mm D mm E mm F mm Anti- Squeak Rubber Extruded Aluminum Mill Finish (23.3) (40.4) R2012 Mortice Fixed 40 x 23mm Heavy Duty A - 610mm B - 762mm C - 914mm D mm E mm F mm Anti- Squeak Rubber Steel Plate Extruded Aluminum Mill Finish (23.3) (40.1) R2014 Sound Protect Type Mortice Fixed 40 x 23mm Heavy Duty A - 610mm B - 762mm C - 914mm D mm E mm F mm R161 (9.5) (9.6) #6 x (12.7) SMS (3.2) (25.4) (9.5) (3.2) #6 x (12.7) SMS Rubber extends (12.7) Fusion Dropseals are Fitted to the Bottom of the Door and Automatically Drop Down Each Time the Door is Closed Adjustable Drop up to 25mm A Hinge Side Plunger When Depressed Drops the Neoprene Gasket in a Scissor Like Motion for a Tight Seal Without Any Drag The Door Seal Retracts Automatically When the Door Opens All Models Test Rated for 5 Million Cycles Sizes shown can be Site Reduced up to 152mm maximum Suitable for Double Doors EA (Easy Action) Option Available for Disabled Use EM (Electro-Magnetic) Option Available for Shielding of Lead Lined Doors Max. Effective Drop (14.3)

171 FIXINGS LEVER HANDLES S1000 Fusion Secure Spindle to Suit 30-39mm Thick Doors S1001 To Suit 40-55mm Thick Doors S1002 To Suit 56-85mm Thick Doors S1003 Fusion Secure half Spindle for Single Lever Operation S1004 Fusion Secure Panic Function Spindle to Suit 40-55mm Thick Doors 8mm S1005 To Suit 56-85mm 9mm Versions to Order S1006 Fusion Secure half Spindle to Fix Dead S1007 Fusion Back to Back Fixing Bolts for Lever Handles to Suit 40-55mm Thick Doors S1008 To Suit 56-85mm S1009 Fusion Lever Handle Grub Screw Allen Key S1010 Fusion Secure Spindle Grub Screw S1011 8mm Spindle For Turns and Releases S1012 Fusion Lever Handle Back to Back Fixing Bolt Allen Key AND 25MM Ø PULL HANDLES S2001 M8 CSK Pull Handle Bolt to Suit Doors up to 63mm Thick S2002 To Suit Doors up to 85mm Thick S2003 M8 Back to Back Fixing for Timber to Suit Doors 39 to 55mm Thick S2004 To Suit Doors 56-85mm S2005 M8 Back to Back Fixing for Glass to Suit 16mm ø Pull Handles S2006 To Suit 19mm ø Pull Handles S2007 To Suit 25mm ø Pull Handles S2008 M8 x 16mm ø Head Snake Eye Bolt to Suit Glass Single Side Fixing S mm ø Head S mm ø Head S2011 M6 x 6mm Pull Handle Grub Screw AND 50MM Ø PULL HANDLES S3001 M12 CSK Pull Handle Bolt to Suit Doors up to 63mm Thick S3002 To Suit Doors up to 85mm Thick S3003 M12 Back to Back Fixing for Timber to Suit Doors 39 to 55mm Thick S3004 To Suit Doors 56 to 85mm S3005 M12 Back to Back Fixing for Glass to Suit 32mm ø Pull Handles S3006 To Suit 38mm ø Pull Handles S3007 M12 x 25mm ø Head Snake Eye Bolt to Suit Glass Single Side Fixing S mm ø Head S mm ø Head S3010 Fusion Pull Handle Allen Key S3011 M6 x 12mm Pull Handle Grub Screw CONCEALED FACE FIXING ROSES S4001 To Suit 16mm ø Pull Handles S4002 To Suit 19mm ø Pull Handles S4003 To Suit 25mm ø Pull Handles S4004 To Suit 32mm ø Pull Handles S4005 To Suit 38mm ø Pull Handles SSS PSS PB PBZ GSS PAA PBL PBZL PBPVD PBZPVD S162

172 ALPHA NUMERIC INDEX CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGE A990BL A990KC A990LK A990PC A991 A992 A993 A994 A995 A0016 A0019 A0116 A0119 A0200 A0300 A0400 A0516 A0519 A0616 A0619 A0716 A0719 A0800 A0900 A1000 A1100 A2000 A3750 A3850 A3950 A37321 A37441 A38321 A38441 A39321 A39441 B B00161 A-F B00162 A-F B00164 A-F B00191 A-F B00192 A-F B00194 A-F A33 A33 A33 A33 A33 A33 A33 A33 A33 A21 A23 A7 A9 A11 A11 A11 A13 A13 A15 A15 A17 A17 A19 A3 A5 A25 A29 A31 A31 A31 A31 A31 A31 A31 A31 A31 B36 B36 B36 B37 B37 B37 B00251 A-F B38 B00252 A-F B A-F B38 B01161 A-F B40 B01162 A-F B40 B01164 A-F B40 B01191 A-F B41 B01192 A-F B41 B01194 A-F B41 B01251 A-F B42 B01252 A-F B42 B01254 A-F B42 B02001 B-C B44 B02002 B-C B44 B02004 B-C B44 B03001 B-C B45 B03002 B-C B45 B03004 B-C B45 B04001 B-C B46 B04002 B-C B46 B04004 B-C B46 B05161 B-C B48 B05162 B-C B48 B05164 B-C B48 B05191 B-C B48 B05192 B-C B48 B05194 B-C B48 B05251 B-C B48 B05252 B-C B48 B05254 B-C B48 B06161 B-C B50 B06162 B-C B50 B06164 B-C B50 B06191 B-C B50 B06192 B-C B50 B06194 B-C B50 B06251 B-C B06252 B-C B06254 B-C B07161 A-F B07162 A-F B07164 A-F B07191 A-F B07192 A-F B07194 A-F B07251 A-F B07252 A-F B07254 A-F B08161 B-C B08162 B-C B08164 B-C B08191 B-C B08192 B-C B08194 B-C B08251 B-C B08252 B-C B08254 B-C B14191 B-F B14194 B-F B20001 C B20004 C B21001 C B21004 C B22161 A-F B22162 A-F B22164 A-F B22191 A-F B22192 A-F B22194 A-F B22251 C-F B22252 C-F B50 B50 B50 B52 B52 B52 B52 B52 B52 B52 B52 B52 B54 B54 B54 B54 B54 B54 B54 B54 B54 B56 B56 B58 B58 B58 B58 B60 B60 B60 B60 B60 B60 B60 B60 B22254 C-F B23191 C-D B23192 C-D B23194 C-D B23251 D-E B23252 D-E B23254 D-E B23321 D-E B23322 D-E B23324 D-E B24321 C-D B24324 C-D B24325 C-D B24381 C-D B24384 C-D B24385 C-D B25321 G-J B25324 G-J B25325 G-J B25381 G-J B25384 G-J B25385 G-J B25501 G-J B25504 G-J B25505 G-J B26321 G-J B26324 G-J B26325 G-J B26381 G-J B26384 G-J B26385 G-J B26501 G-J B26504 G-J B26505 G-J B27001 C-E B27004 C-E B60 B62 B62 B62 B62 B62 B62 B62 B62 B62 B64 B64 B64 B64 B64 B64 B66 B66 B66 B66 B66 B66 B66 B66 B66 B68 B68 B68 B68 B68 B68 B68 B68 B68 B70 B70 B27005 C-E B50002 X B52002 X B53001 B53002 B81002 B81003 B81004 B81005 B81006 B81007 B81008 B81009 B82002 B82003 B82004 B82005 B82006 B82007 B82008 B82009 B83002 B83003 B83004 B83005 B84010 B84020 B84030 B84040 B84050 B84060 B84070 B84080 B84090 B84100 B84110 B84120 B84130 B84140 B84150 B84160 B84170 B70 B77 B77 B77 B77 B72 B72 B72 B72 B72 B72 B72 B72 B74 B74 B74 B74 B74 B74 B74 B74 B75 B75 B75 B75 B76 B76 B76 B76 B76 B76 B76 B76 B76 B76 B76 B76 B76 B76 B76 B76 B76 B84180 B B76 B84200 B76 B84210 B76 B84220 B76 B84230 B76 B84240 B76 B84250 B76 B84260 B76 B84270 B76 B84280 B76 B84290 B76 B84300 B76 B90002 A-F B77 B90002 X B77 B91002 A-F B77 B91002 X B77 B92002 A-F B77 C C201 C79 C202 C79 C203 C79 C204 C79 C205 C79 C206 C79 C207 C79 C208 C79 C209 C79 C210 C79 C301 C80 C302 C80 C303 C80 C304 C80 C305 C80 C306 C80 C307 C80 C308 C80 C501 C91 C502 C81 C503 C81 C504 C81 C505 C81 C601 C602 C603 C604 C605 C701 A-E C702 A-H C703 A-L C704 B-L C705 A-L C706 A-L C801 C802 C803 C804 C805 C806 C807 C808 C809 C810 C811 C901 C902 C903 C904 C905 C906 C81 C81 C81 C81 C81 C82 C82 C82 C82 C82 C82 C83 C83 C83 C83 C83 C83 C83 C83 C83 C83 C83 C83 C83 C83 C83 C83 C83 T163

173 ALPHA NUMERIC INDEX T164 CODE PAGE D D30 D85 D31 D85 D32 D85 D33 D85 D34 D85 D35 D85 D36 D85 D37 D85 D38 D86 D39 D86 D40 D86 D41 D86 D42 D86 D43 D86 D44 D86 D45 D86 D46 D87 D47 D87 D48 D87 D49 D87 D50 D87 D51 D87 D52 D88 D53 D88 D54 D88 D55 D88 D56 D88 D57 D88 E E2001 E90 E2002 E90 E2003 E90 E2004 E90 E2005 E90 E2006 E90 E2007 E90 E2008 E90 E2009 E90 E2010 E90 E2011 E90 E2012 E90 E2013 E90 E2014 E90 CODE PAGE E2015 E90 E2016 E90 E2017 E90 E2018 E90 E2019 E90 E2020 E90 E2021 E90 E2022 E90 E4001 E91 E4002 E91 E4003 E91 E4004 E91 E4005 E91 E4006 E91 E4007 E91 E4008 E91 E4009 E91 E4010 E91 E4011 E91 E4012 E91 E4013 E91 E4014 E91 E4015 E91 E4016 E91 E4017 E91 E4018 E91 E4019 E91 E4020 E91 E4021 E91 E4022 E91 E5001 E92 E5002 E92 E5003 E92 E5004 E92 E5005 E92 E5006 E92 E5007 E92 E5008 E92 E5009 E92 E5010 E92 E5011 E92 E5012 E92 E6001 E92 E6002 E92 CODE PAGE E6003 E92 E6004 E92 E6005 E93 E6006 E93 E6007 E93 E6008 E93 E6009 A-E E94 E6010 A-E E94 E6011 A-E E94 E6012 A-E E94 E6013 A-E E94 E6014 E93 E6015 E93 E6016 E93 E7001 E95 E7002 E95 E7003 E95 E7004 E95 E7005 E95 E7006 E95 E7007 E95 E7008 E95 E7009 E95 E7010 E95 E7011 E95 E7012 E95 E8001 E96 E8002 E96 E8003 E96 E8004 E96 E8005 E96 E8006 E96 E8007 E96 E8008 E96 E8009 E96 E8010 E96 E8011 E96 E8012 E96 E8013 E96 E9001 E97 E9002 E97 E9003 E97 E9004 E97 E9005 E97 CODE PAGE E9006 E97 E9007 E97 E9008 E97 E9009 E97 E9010 E97 E9011 E97 E9012 E97 E9013 E97 F F150 F99 F151 F99 F152 F99 F153 F99 F250 F99 F251 F99 F252 F99 F253 F99 F1001 F100 F1002 F100 F1003 F100 F1004 F100 F1005 F100 F1006 F100 F1007 F100 F2001 F102 F2002 F102 F2003 F102 F2004 F102 F2005 F102 F2006 F102 F2007 F102 F2008 F102 F2009 F102 F2010 F102 F2011 F102 F2012 F102 F3001 F103 F3002 F103 F3003 F103 F3004 F103 F3005 F103 CODE PAGE F3006 F103 F3007 F103 F4001 F104 F4002 F104 F4003 F104 F4004 F104 F4005 F104 F4006 F104 F4007 F104 F4008 F104 F4009 F104 F4010 F104 F5001 F105 F5002 F105 F5003 F105 F5004 F105 F5005 F105 F6001 F106 F6002 F106 F6003 F106 F6004 F106 F6005 F106 F7001 F107 F7002 F107 F7003 F107 F7004 F107 F7005 F107 F8001 F108 F8002 F108 F8003 F108 F8004 F108 F8005 F108 F8006 F108 F8007 F108 F8008 F108 F9001 F109 F9002 F109 F9003 F109 F9004 F109 F9005 F109 F9006 F109 CODE PAGE F9007 F109 F9008 A-M F110 F9009 F110 F9010 F110 F9011 F110 F9012 F110 F9013 F110 F9014 F110 F9015 F110 F9016 F110 F9017 F111 F9018 F111 F9019 F111 F9022 F112 F9023 F112 F9024 F112 F9025 F112 F9026 F112 F9027 F112 F9028 F112 F9029 F112 F9030 F112 F9031 F112 F9032 F111 F9033 F111 F9034 F111 G G200 G114 G205 G114 G215 G115 G220 G114 G225 G115 G230 G114 G235 G115 G240 G115 G240 MK G115 G301 A-C G116 G302 G116 G303 A-C G116 G304 A-C G117 G305 A-C G117 G306 G117 G306 MK G117 G307 G117 CODE PAGE G307 MK G117 G400 A-J G118 G401 A-C G118 G405 A-C G118 G406 G118 G408 G118 G409 A-B G118 G410 A-K G118 G412 A-H G119 G413 A-D G119 G415 A-H G118 G416 A-G G119 G417 A-G G119 G420 G119 G425 G119 H H501 H121 H502 H121 H503 H121 H504 H121 H505 H121 H506 H121 H507 H121 H508 H121 H509 H121 H510 H121 H511 H121 H512 H121 H513 H121 H514 H121 H515 H121 H516 H121 H517 H121 H518 H121 H519 H122 H520 H122 H521 H122

174 ALPHA NUMERIC INDEX T165 CODE PAGE H522 H122 H523 H122 H524 H122 H525 H122 H526 H122 H527 H122 H528 H122 H529 H122 H530 H122 H531 H122 H532 H122 J J1001 J124 J1002 J124 J1003 J124 J1004 J124 J1005 J124 J1006 J124 J1007 J124 J1008 J124 J1009 J124 J1010 J124 J1011 J124 J1012 J124 J1013 J124 J1014 J124 J1015 J124 J1016 J124 J1017 J124 J1018 J125 J1019 J125 J1020 J125 J1021 J125 J1022 J125 J2001 J126 J2002 J126 J2003 J126 J2004 J126 J2005 J126 J2006 J126 J2007 J126 J2008 J128 J2009 J128 J2010 J126 CODE PAGE J2011 J126 J2012 J127 J2013 J127 J2014 J127 J2015 J127 J2016 J127 J2017 J127 J2018 J127 J2019 J127 J2020 J127 J2021 J127 J2022 J127 J3001 J129 J3002 J129 J3003 J129 J3004 J129 J3005 J129 J3006 J129 J3007 J129 J3008 J129 J3009 J129 J3010 J129 J3011 J129 J3012 J129 J3013 J129 J3014 J129 J3015 J129 J3016 J129 J3017 J129 J3018 J129 J3019 J130 J3020 J130 J3021 J130 J3022 J130 J3023 J130 J3024 J130 J3025 J130 J3026 J130 J3027 J130 J3028 J130 J3029 J130 J3030 J130 J3031 J130 J3032 J130 J3033 J130 J3034 J130 CODE PAGE J3035 J130 J3036 J130 J3037 J130 K K1001 K132 K1002 K132 K1003 K132 K1004 K132 K1005 K132 K1006 K132 K1007 K132 K1008 K132 K1201 K132 K1202 K132 K1203 K132 K1204 K132 K1205 K132 K1206 K132 K1207 K132 K1208 K132 K1209 K132 K1301 K132 K1302 K132 K1303 K132 K1304 K132 K1401 K132 K1402 K132 K1403 K132 K1404 K132 K1405 K132 K1501 K133 K1502 K133 K1601 K133 K1602 K133 K1701 K133 K1702 K133 K1801 K133 K1802 K133 K1901 K133 K2001 K134 CODE PAGE K2002 K134 K2201 K134 K2301 K134 K2302 K134 K3001 K135 K3002 K135 K3003 K135 K3004 K135 K3201 K135 K3202 K135 K3203 K135 K3204 K135 K3301 K135 K3302 K135 K3401 K136 K3402 K136 K3403 K136 K3404 K136 K3405 K136 K3406 K136 K3407 K136 K3408 K136 K3409 K136 K4001 K138 K4002 K138 K4003 K138 K4004 K138 K4005 K138 K5001 K138 K5002 K138 K5003 K138 K5004 K138 K5005 K138 K5006 K138 K5007 K138 K5008 K138 K6001 K139 K6002 K139 K6003 K139 K6004 K139 K6005 K139 CODE PAGE K7001 K137 K7002 K137 K7003 K137 K7004 K137 K7005 K137 K7006 K137 K7007 K137 K7008 K137 K7009 K137 K7010 K137 K7011 K137 K7012 K137 K7013 K137 K7014 K137 K7015 K137 K7016 K137 K7017 K140 K7018 K140 K7019 K140 K7021 K140 K7022 K140 K7023 K140 K7024 K140 K7025 K140 K7026 K140 K7027 K140 K7028 K140 K8001 K141 K8002 K141 K8003 K141 K8004 K141 K9001 K141 K9002 K141 K9003 K141 K9004 K141 K9005 K141 K9006 K141 K9007 K141 K9008 K141 K9009 K141 K9010 K141 K9011 K141 CODE PAGE L L101 L143 L102 L143 L103 L143 L104 L143 L105 L143 L106 L143 L107 L143 L108 L143 L109 L143 L110 L143 L11 L143 L111 L143 L112 L143 L113 L143 L114 L143 L115 L143 L116 L143 L117 L143 L118 L143 L119 L143 L121 L143 L122 L143 L123 L143 L124 L143 L125 L143 L126 L143 L127 L143 L128 L143 M M001 M145 M002 M145 M003 M145 M004 M145 M005 M145 M006 M145 M007 M145 M008 M145 M009 M145 M010 M146 M011 M146 M012 M146 M013 M146 M014 M146 CODE PAGE M015 M146 M016 M146 M017 M146 M018 M147 M019 M147 M020 M147 M021 M147 M022 M147 M023 M147 M024 M147 M025 M147 M026 M148 M027 M148 M028 M148 M029 M148 M030 M148 M031 M148 M040 M148 M041 M148 M042 M148 M043 M148 M050 M149 M051 M149 M052 M149 M053 M149 M060 M149 M061 M149 M062 M149 N N1001 N151 N1002 N151 N1003 N151 N1004 N151 N1005 N151 N1006 N151

175 ALPHA NUMERIC INDEX T166 CODE PAGE N2001 N151 N2002 N151 N2003 N151 N2004 N151 N2005 N151 N2006 N151 N2007 N151 N2008 N151 N2009 N151 N2010 N151 N2011 N151 N3001 N152 N3002 N152 N3003 N152 N3004 N152 N3005 N152 N3006 N152 N4001 N152 N4002 N152 N4003 N152 N4004 N152 N4005 N152 N5001 N153 N5002 N153 N5003 N153 N5004 N153 N5005 N153 N5006 N153 N5007 N153 N5008 N153 N5009 N153 N5010 N153 CODE PAGE P P1001 P155 P1002 P155 P2001 P155 P2002 P155 P3001 P156 P3002 P156 P4001 P156 P4002 P156 P5001 P157 P5002 P157 P5003 P157 P5004 P157 P5005 P157 CODE PAGE R R1024 R159 R1025 R159 R1034 R159 R1035 R159 R1044 R159 R1045 R159 R1054 R159 R1055 R159 R1063 R159 R1064 R159 R1065 R159 R1066 R159 R1072 R159 R1073 R159 R1074 R159 R1075 A-J R159 R1076 A-J R159 R2001 A-D R160 R2002 A-D R160 R2003 A-D R160 CODE PAGE R2004 A-D R160 R2005 A-D R160 R2006 A-D R160 R2007 A-D R160 R2008 A-C R160 R2009 A-F R161 R2010 A-F R161 R2011 A-F R161 R2012 A-F R161 R2013 A-F R161 R2014 A-F R161 CODE PAGE S S1000 S162 S1001 S162 S1002 S162 S1003 S162 S1004 S162 S1005 S162 S1006 S162 S1007 S162 S1008 S162 S1009 S162 S1010 S162 S1011 S162 S1012 S162 S2001 S162 S2002 S162 S2003 S162 S2004 S162 S2005 S162 S2006 S162 S2007 S162 S2008 S162 S2009 S162 S2010 S162 S2011 S162 CODE PAGE S3001 S162 S3002 S162 S3003 S162 S3004 S162 S3005 S162 S3006 S162 S3007 S162 S3008 S162 S3009 S162 S3010 S162 S3011 S162 S4001 S162 S4002 S162 S4003 S162 S4004 S162 S4005 S162