My home Mobile phone application

Transcription

1 My home Mobile phone application Instructions for use and installation Alarm Heating Bedroom Living room Kitchen Garage Arrived Message

2 Contents 1- Presentation Downloading the application Via your mobile phone Via a PC Saving your mobile phone number Using the application First connection Launching the application Entering the alarm system telephone number Transferring your configuration Controlling your installation Presentation Controlling the installation Checking the status of the installation Exit application Managing messages Reading messages Deleting a message Emptying the mailbox Customising your application Renaming the Channel icons Creating a scenario Using a scenario Modifying a scenario Renaming a scenario Deleting a scenario Customising the system Changing the system date Changing the call numbers Activating an automatic device control channel Deactivating an automatic device control channel Activating the heating control Deactivating the heating control Protecting the application Activating the access code Changing the session duration Deactivating the access code Advanced functions Displaying the system parameters Acknowledgement of commands

3 1- Presentation Alarm Heating Bedroom The My home mobile phone application allows you to: access your installation remotely to check its status control your installation remotely (create scenarios, information feedback, etc.) receive event messages sent by the transmitter This application can be installed on a compatible mobile phone. Living room Kitchen Garage Arrived Message It communicates with you transmitter using SMS. To find out about compatibility and to install the application on your mobile phone, go to the website: Menu général JAVA application Transmitter SMS Mobile phone Alarm detectors Heating and domestic hot water control Control systems: lighting, roller shutters, gate, garage door, etc. 3

4 2- Downloading the application Via your mobile (recommended) To download the My home application using your mobile, you must connect to the Internet using a WAP or GPRS data connection. The data connections on your phone (WAP or GPRS) must be configured (ask your operator) To download the application: - Open the web browser on your mobile phone and go to the following address: Via a PC You can download the My home application to your PC at the following address: Choose the most appropriate application for the screen resolution of your mobile phone. - Confirm to start the download - When the download is complete: Connect your mobile to the computer, transfer the application to your mobile and install - Choose the most appropriate application for the screen resolution of your mobile phone - Confirm to start the download Important : several security messages may pop up during download. Simply confirm to continue installation. Note : for more information about installing an application via a PC, please refer to your mobile phone instructions. Saving your mobile phone number For security reasons, you must save your mobile phone number in the transmitter. To find out how to save your mobile phone number as a call number, refer to the transmitter instructions. Using the application The My home JAVA application screens and control may display differently depending on the model of the mobile phone you are using. (Refer to your mobile phone documentation) Important : the application uses SMS to exchange information with the system, so there will be a pause of several seconds each time a message is sent. In exceptional cases, an SMS message may fail to reach its destination. Java, JME and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and/or other countries. 4

5 3- First connection Launching the application Open the Application menu on your mobile phone (refer to the instructions for your phone) and launch the My home application. When the application is launched for the first time, the phone's features are tested and you should see the 3 icons opposite. If your phone is not suitable, an error message appears: - Incompatible screen size, please download... (you need to download again) - Incompatible character size (some text may not display correctly but the application will still work) - Incompatible (your phone does not have the necessary features - you cannot use the application to control your installation) My home Messages Info Entering the system number Before sending the system a command, you must enter its phone number. - Select the icon - Select - Enter the 10-digit telephone line number to which the alarm system is connected, immediately followed by the SMS mailbox number (9 for an alarm control unit, no number required for a GSM transmitter) - Confirm your selection Important: This number will be stored in your phone and can be changed at any time. However, for security reasons, it will not be displayed in the application. : SMS mailbox number for an alarm control unit Uploading your configuration The My home JAVA application adapts to your configuration based on the products associated with your system: To upload your configuration: - Select the Info icon - Select Send - Once the configuration request is received, the transmitter sends a message to your mobile. - Select View to display your configuration in the general menu Info View Send Reception of the new configuration Alarm Heating Bedroom Living room Water Garage. Messages Info 5 Example

6 4- Controlling your installation Presentation The My home application is designed to control your home installation: Switch alarm surveillance on/off: Adjust the heating level using the following icons: Alarm Heating Frost Protection Economy Comfort Automatic Control domestic hot water via an energy manager Control a control system (lighting, roller shutters, etc.) Water Arrêt Automatique Channel 1* 0000 ON OFF Timed operation * * The name of this icon can be changed (see Customising your application ) Note: You can find a description of each feature by selecting the Help menu. Controlling the installation - in the My home application, select the icon of the command you wish to modify - press the confirm button repeatedly to select the desired status - follow the same procedure for each of the commands you wish to modify (hot water, heating, alarm, etc.) - to put a control system channel in timed operation mode, select the timer icon and enter the 0012 timer value using the keypad's numeric keys (e.g for 1 hour 35 minutes) - select Send - confirm that you wish to send the message - the mobile phone sends the command to the system Depending on the type of product used to control the heating, you can select: - a mode (Frost Protection, Economy, Comfort, Automatic) - a temperature in degrees (15 C for example); you will need to use the keypad to enter the temperature (5 to 30 C) if you choose this option Alarm Heating Bedroom Living room Water Garage. Messages Info Alarm Heating Bedroom Living room Water Garage. Messages Info Send 6

7 Checking the status of the installation To view the following information: - alarm surveillance ON or OFF - most recent event - the faults (battery, open entry, etc.) - inside temperature (near the transmitter control unit or transmitter) and outside temperature (for outdoor siren only) - domestic hot water status - heating status Info Send You need to: - Select the Info icon - Select Send and confirm Important: It is not possible to check the On/Off status of your control systems. Quitting the application To quit the My home application: - Select Close and confirm 7

8 5- Managing messages The "Messages received" and "Messages sent" boxes may contain up to 10 messages each. The messages are sorted by date. If the maximum number of messages is reached, the most recent message received/sent replaces the oldest. Unread messages are displayed in red. Messages received: - acknowledgement (see Acknowledgement of commands ) - info (status of alarm, heating, domestic hot water, temperature) - param (call numbers, batteries, software version) - error (command to activate alarm surveillance while it is in maintenance mode) Messages sent: - cmd (commands sent) - info (request for information) Messages Received Sent Received at Subj 10/05/10 12h11 Info 05/05/10 15h54 Info 08/04/10 09h12 22/03/10 05h23 Received Sent Issued at Subj 15/05/10 20h05 Info 14/05/10 12h00 Info Reading messages To read your messages: - Select the Messages icon - Select Received or Sent by pressing right or left - Select a message by pressing up or down - Confirm to see the content of the message 2/4 Received 05/05/10 at 15:54 System date: 05/05/10 15:54 Intruder alarm on 03/05/10 at 16:36 Bedroom 3 Battery fault Open entry Deleting a message To delete a message: - select the Messages icon, - select Received or Sent by pressing right or left - select the message to be deleted by pressing up or down - select Delete - the message disappears Received Sent Issued at Subj 15/05/10 20h05 Info 14/05/10 12h00 Info Delete Emptying the mailbox To delete all Received or Sent messages: - select the Messages icon - select Received or Sent by pressing right or left - select Empty - all messages are deleted Received Sent Issued at Subj 15/05/10 20h05 Info 14/05/10 12h00 Info Empty Received Sent Emis à Objet 8

9 6- Customising your application Renaming the Channel icons To rename: - select the icon of the channel you wish to rename - select Rename - enter the new name (e.g., Shutters) - confirm - the icon name is modified Channel 1 Rename Shutters Creating a scenario To make it easier to send several commands that need to be changed frequently, it is possible to create up to 3 scenarios.. Alarm Heating Bedroom Save To create a scenario: - select the status of the commands you wish to modify (alarm, heating, channel 1, etc.) - select Save - enter the name of the scenario (e.g. Absence) - confirm - the scenario icon appears on the screen Living room Water Garage. Messages Info Scenario name: Absence Alarm Heating Bedroom Living room Water Garage Absence. Messages Using a scenario - select the scenario icon - confirm to activate it - the different commands are displayed - select Send - confirm that you wish to send the message - the mobile phone sends the command to the system Absence Absence Send 9

10 6- Customising your application Modifying a scenario To modify the commands of an existing scenario: - select the scenario icon - confirm to activate it - modify the desired commands, - go back to the scenario icon Absence Absence modify the desired commands - select Modify - the scenario is modified Modify Absence Renaming a scenario To rename a scenario: - select the relevant scenario icon - select Rename Rename - rename the scenario - confirm Absence Start - the scenario name is modified Deleting a scenario To delete a scenario: - select the relevant scenario icon - select Delete Delete - confirm Absence - the scenario is deleted 10

11 7- Personnaliser le système Important : All these settings can be adjusted using voice synthesis (except ). If you have already created your settings, you do not need to modify them using the My home application. Changing the system date To set the date and time of the transmitter: - Select -> - By default, the phone time and date are displayed, ready to be sent - Enter the date and time - Select Send and confirm enter the date and time Changing the call numbers To change the call numbers to be used by the transmitter in the event of an alarm: - select -> - enter or change the call numbers - select Send and confirm To delete a number, just leave the corresponding field empty. Call number 1 : Call number 2 : Call number 3 : Call number 4 : For each call number stored in the transmitter, you can select the type of message that will be sent in the event of an alarm (voice synthesis or SMS): - select -> - for each number, choose By voice or By SMS - select Send, then confirm to send the message to the system if you have changed the mailing list options using another mobile phone, you must retrieve the mailing list information beforehand: - select -> - select Request and confirm - upon reception of the system's response, go back to the menu to modify the initial settings Call no. 1 By voice By SMS Call no. 2 By voice By SMS Call no. 3 By voice By SMS If a message is sent via SMS, it will go directly into the phone's mailbox rather than the one in the My home application. Call no. 4 By voice By SMS 11

12 7- Customising the system Activating a control system control channel The system has four control channels for control systems. Each of these channels can be associated with the diverse functions of receivers from the control systems range. For example, channel 1 can be used to raise/lower the roller shutters. The procedure is similar for associating any button on a receiver with a system control channel. On the receiver, put the receiver in association mode (refer to the corresponding documentation) In the mobile phone application: - select -> - choose the control system channel to be assigned (e.g. chan 1) - select Associate, then confirm to send the message After a few seconds, the system emits one beep. Make sure that the buttons on the receiver are no longer flashing. The buttons are now associated with control channel 1 on the system. Important: The first time a product is associated with a control system channel, the icon will appear in the My home application once the next system message is received (see Checking the status of the installation ). Put the receiver in association mode (refer to the corresponding documentation) Heating Chan 1 Chan 2 Chan 3 Chan 4 Associate Deactivating a control system control channel In the mobile phone application: - select -> Peripherals mgmt - choose the control system channel to be deactivated (e.g. chan 2) - select Delete, then confirm to send the message - after a few seconds, the system emits one beep Control channel 2 is no longer enabled on the system. In the application, the channel 2 icon will disappear the next time a message from the system is received. Heating Chan 1 Chan 2 Chan 3 Chan 4 Delete 12

13 Activating the heating control Put the heating control in association mode (refer to the corresponding documentation) In the My home application: - select -> - choose the Heating channel - select Associate, then confirm to send the message Note: If you order a PACK LABEL, the Hot water icon will appear. This will allow you to switch the domestic hot water on and off. Put the heating control in association mode (refer to the corresponding documentation) Heating Chan 1 Chan 2 Chan 3 Chan 4 Associate Deactivating the heating control In the mobile phone application: - select -> - choose the Heating channel - select Delete, then confirm to send the message In the application, the heating icon will disappear the next time a message from the system is received. Heating Chan 1 Chan 2 Chan 3 Chan 4 Delete 13

14 8- Protecting the application Activating the access code You can set an access code to protect the My home application. By default, this code is not activated. To create or modify the access code: - select -> -> Access code - enter the code (4 to 8 digits) - confirm the code - select OK and confirm - The access code is confirmed and will be requested each time the application is opened. By default, it will only be valid for a limited period of 5 minutes (session duration). Important : If you forget your access code, you must remove the My home application from your phone and download it again. All settings will be lost. Access code Session duration New access code (4 to 8 digits): ******* Confirm the new access code: ******* OK Changing the session duration To modify the access code validity period, you must modify the session duration. To require the code for every alarm surveillance on/off command, select Alarm security. To modify or deactivate the session duration: - select -> -> Session duration - enter the access code - change the duration (e.g. 15 min.) - select OK and confirm At the end of the session, you will need to re-enter the access code when you restart the "My home" application or when sending a message to the system. Code d accès : ******* 5 mn 10 mn 15 mn Alarm security Deactivate Access code Session duration Deactivating the access code To deactivate the access code: - select -> -> Session duration - enter the access code - select Deactivate - select OK and confirm Code d accès : ******* 5 mn 10 mn 15 mn Alarm security Deactivate 14

15 9- Advanced functions Displaying the system parameters - the system date and time - the call numbers - the battery voltages - the system software version To receive this information: - select -> Send - confirm to send the message After a few seconds, the application will receive a message from the system. To read the information: - select Messages -> Received - select the most recent message Messages Received Sent Received at Subj 10/05/10 12h11 Info 05/05/10 15h54 Info 08/04/10 09h12 22/03/10 05h23 2/4 Received 10/05/10 at 12:11 System date: 10/05/10 12:11 Call no. 1 : Call no. 2 : Call no. 3 : Signal level: strong (24) Battery voltage 5.5 V Software version: V1.02 Acknowledgement of commands You can request the system to send you an acknowledgement for each message sent: - select -> - Select Yes - select OK, then confirm to save the change The next time a command is sent to the system, you will receive an acknowledgement. To read the acknowledgement messages: - select Messages -> Received - select the most recent message If you select No, you will not be sent any acknowledgement messages. Received acknowledgements OK Yes No 15

16 Unit compliant with the requirements of directives R&TTE 1999/5/EC * _rev.1* Due to changes in standards and equipment, the characteristics given in the text and the illustrations in this document are not binding unless confirmed by us.