SAVE THESE INSTRUCTIONS

Transcription

1 INSTRUCTION MANUAL

2 IMPORTANT SAFETY INSTRUCTIONS This sing machin is no a oy. Do no allo childn o play ih his machin. Th machin is no inndd fo us by childn o mnally infim psons ihou supvision. This sing machin is dsignd and manufacud fo houshold us only. Rad all insucion bfo using his sing machin. DANGER To duc h isk of lcic shock: 1. An applianc should nv b lf unandd hn pluggd in. Alays unplug his sing machin fom h lcic oul immdialy af using and bfo claning. 2. Alays unplug bfo placing a sing machin bulb. Rplac bulb ih sam yp ad 15 as. 3. Do no ach fo h applianc ha has falln ino a. Unplug immdialy. 4. Do no plac o so applianc h i can fall o b pulld ino a ub o sink. Do no plac in o dop ino a o oh liuid. WARNING To duc h isk of buns, fi, lcic shock, o injuy o psons: 1. Do no allo childn o play ih h machin. Th machin is no inndd fo us by childn o infim psons ihou pop supvision. Do no allo o b usd as a oy. Clos anion is ncssay hn his sing machin is usd by o na childn. 2. Us his applianc only fo is inndd us as dscibd in his on s manual. Us only aachmns commndd by h manufacu as conaind in his on s manual. 3. Nv opa his sing machin if i has a damagd cod o plug, if i is no oking poply, if i has bn doppd o damagd, o doppd ino a. 4. Nv opa h applianc ih any ai opning blockd. Kp vnilaion opning of his sing machin and foo conoll f fom accumulaion of lin, dus and loosn cloh. 5. Nv dop o ins any objc ino any opning. 6. Do no us oudoos. 7. Do no opa h aosol (spay) poducs a bing usd o h oxygn is bing adminisd. 8. To disconnc, un all conols o h off ( O ) posiion, hn mov plug fom oul. 9. Do no unplug by pulling on cod. To unplug, gasp h plug, no h cod. 10. Kp fings aay fom all moving pas. Spcial ca is uid aound h sing machin ndl. 11. Alays us h pop ndl pla. Th ong pla can caus h ndl o bak. 12. Do no us bn ndls. 13. Do no pull o push fabic hil siching. I may dflc h ndl causing i o bak. 14. Sich his sing machin off ( O ) hn making any adjusmn in h ndl aa, such as hading h ndl, changing h ndl, hading h bobbin o changing h pss foo, and h lik. 15. Alays unplug his sing machin fom h lcical oul hn moving covs, lubicaing, o hn making any oh adjusmns mniond in his on s manual. SAVE THESE INSTRUCTIONS Th dsign and spcificaions a subjc o chang ihou a pio noic. Plas no ha on disposal, his poduc mus b safly cycld in accodanc ih lvan Naional lgislaion laing o lcical/lconic poducs. If in doub plas conac you ail fo guidanc. (Euopan Union only.)

3 TABLE OF CONTENTS SECTION 1. KNOW YOUR MACHINE Nam of Pas... 2 Sandad Accssois... 3 Accssoy soag... 3 Exnsion Tabl... 3 F-am sing... 4 SECTION 2. GETTING READY TO SEW Conncing h Po Supply... 4 Conolling h Sing Spd... 5 Rvs Sich Lv... 5 Dopping h Fd Dog... 5 Raising and Loing h Pss Foo... 6 Changing h Pss Foo... 6 Rmoving and Aaching h Foo Hold... 6 Changing Ndls... 7 Ndl and Thad Cha... 7 Winding h Bobbin... 8 Sing h spool... 8 Rmoving h bobbin... 8 Winding h bobbin... 9 Insing h bobbin Thading h Machin Daing up h Bobbin Thad Slcing h Sich Pan Pan slco dial Sich Lngh Dial Adjusing sch sich balanc Sich Widh Dial Vaiabl ndl posiion Balancing Ndl Thad Tnsion SECTION 4. UTILITY STITCHES Basic Zigzag Ovcasing Kni Sich Tico Sich (Mulipl Zigzag Sich) Saigh Sch Sich Zigzag Sch Sich Buon Sing Sp Buonhol To adjus buonhol sich dnsiy Codd Buonhol Zipp Applicaion Blind Hmming SECTION 5. DECORATIVE STITCHES Dcoaiv Sain Sichs Dcoaiv Sch Sichs Smocking Pin Tucking Shll Tucking Fagoing Pachok SECTION 6. CARE AND MAINTENANCE Claning h Hook Rac and Fd Dogs Rplacing h Bobbin Hold Rplacing h Ligh Bulb Toublshooing SECTION 3. BASIC SEWING Saigh Sich Sing Saing o s Changing h sing diciion Finishing sing Sam guids on h ndl pla Tuning a sua con

4 u i @0!9!8!7!6!5 SECTION 1. KNOW YOUR MACHINE Nams of Pas Bobbin ind sopp Bobbin ind spindl Hol fo addiional spool pin Spool hold Spool pin y Bobbin ind had guid u Thad ak-up lv i Fac pla o Thad cu!0 Ndl pla!1 Exnsion abl (Accssoy soag)!2 Hook cov pla!3 Hook cov pla las buon!4 Thad nsion dial!5 Rvs sich lv!6 Sich lngh dial!7 Pan slco dial!8 Sich idh dial!9 Pss Ndl clamp Foo Caying Po Machin Dop fd F-am #0 Foo @7 2

5 y u i o!0!1!2 Sandad Accssois Zipp foo E Blind hmming sich foo G Sliding buonhol foo J Ndls Bobbins y Scdiv u Lin bush i Sam ipp (buonhol opn) o Spool hold (lag)!0 Spool hold (small)!1 Addiional spool pin!2 Fl cushion Accssoy soag Th sandad accssois can b sod in h accssoy soag box und h xnsion abl. Da ou h soag box fom h abl as shon. Accssoy soag box Exnsion Tabl To dach: Pull h xnsion abl o h lf. To aach: Ins h pin ino h hol and push h xnsion abl o snap i in plac. Pin Hol 3

6 F-am sing F-am sing is usd fo siching slvs, aisbands, pan lgs o any oh ubula gamns. I is also usful fo daning socks o mnding kns o lbos. SECTION 2. GETTING READY TO SEW Conncing h Po Supply z Tun h po sich off. x Ins h machin plug ino h machin sock. c Ins h po supply plug ino h all oul. v Tun h po sich on. Po sich Machin plug Machin sock Po supply plug Wall oul Opaing Insucions: Th symbol "O" of a sich indicas h "off" posiion of a sich. Fo an applianc ih a polaizd plug (on blad id han h oh): To duc h isk of lcical shock, his plug is inndd o fi in a polaizd oul only on ay. If i dos no fi fully in h oul, vs h plug. If i sill dos no fi, conac a ualifid lcician o insall h pop oul. Do no modify h plug in any ay. Th foo conoll Modl YC-482J o TJC-150 is usd ih h sing machin Modl 7318 (USA mak only). NOTE: Bfo conncing o h po supply, mak su h volag shon on h machin confoms o you lcical po. WARNING: Whil in opaion, alays kp you ys on h sing aa, and do no ouch any moving pas such as h had ak-up lv, handhl o ndl. Alays un off h po sich and unplug fom h po supply: - hn laving h machin unandd. - hn aaching o moving pas. - hn claning h machin. Do no plac anyhing on h foo conol, ohis h machin ill un inminly. 4

7 Conolling h Sing Spd Foo conol Sing spd can b vaid by h foo conol. Th had you dpss h foo conol, h fas h machin uns. Rvs Sich Lv Push h vs sich lv don o s in vs. Th machin ill s in vs hil h lv is pushd. Dopping h Fd Dog Th dop fd lv is locad undnah h f-am bd on h backsid of h machin. To dop h fd dog, push h lv in h dicion of h ao, as illusad. To ais h fd dog, push h lv in h dicion of h ao, as illusad, and un h handhl oad you. Th fd dog mus b up fo gula sing. Dop fd lv Raisd posiion Lod posiion 5

8 Raising and Loing h Pss Foo Th pss foo lif aiss and los h pss foo. You can ais h foo abou 1/4" (0.6 cm) high han h nomal up posiion fo asy moval of h pss foo, o o hlp you plac havy fabic und h foo. Lod posiion Nomal up posiion Exa up posiion Changing h Pss Foo To mov: Rais h ndl o is highs posiion by uning h handhl counclockis. Rais h pss foo, and pss h lv on h back of h foo hold. Lv CAUTION: Tun OFF h po sich bfo changing h foo. Alays us h pop foo fo h slcd pan. Th ong foo can caus h ndl o bak. Do no push h lv don o pvn i fom bing bokn. To aach: Plac h dsid pss foo, so ha h pin on h foo lis jus und h goov on h foo hold. Lo h pss foo lif o lock h foo in plac. Goov Pin Rmoving and Aaching h Foo Hold WARNING: Tun OFF h po sich bfo daching o aaching h foo hold. To mov: Rmov h ssc by uning i counclockis ih a scdiv and mov h foo hold. To aach: Mach h hol in h foo hold ih h hadd hol in h pss ba. Fi h ssc ino h hol. Tighn h sc by uning i clockis ih a scdiv. Ssc Foo hold Hol Thadd hol 6

9 Ndl and Thad Cha Changing Ndls CAUTION: Alays mak su o un h po sich off and disconnc h machin fom po supply bfo changing h ndl. Rais h ndl by uning h handhl and lo h pss foo. Tun off h po sich. z Loosn h ndl clamp sc by uning i counclockis. Rmov h ndl fom h clamp. Ndl clamp sc x Ins a n ndl ino h ndl clamp ih h fla sid of h ndl o h a. Whn insing h ndl ino h ndl clamp, push i up agains h sopp pin and ighn h ndl clamp sc fimly. Sopp pin Fla sid To chck ndl saighnss, plac h fla sid of h ndl ono somhing fla (a ndl pla, glass c.) Th gap bn h ndl and h fla sufac should b consisn. Nv us a blun ndl. Gap WEIGHT FABRIC TYPE of NEEDLE NEEDLE SIZE Vy Ligh Chiffon, Gog, Fin Lac, Ogandy N, Tull Univsal Ball Poin 9 (65) 9 (65) Ligh Bais, Voil, Lan, Pu Silk, Cp d Chin, Sh Cp, Chambay, Handkchif Linn, Gingham, Challis, Pcal, Wool Cp, Pau d Soi, Taffa, Sain, Silk Suah, Sain-backd Cp, Qiana Blu Tippd Ndl Univsal 11 (75) 11 (75) 12 (80) Singl Knis, Jsy, Sima, and Tico Blu Tippd Ndl Ball Poin 11 (75) 11 (75) Lah, Sud Wdg Poin Lah Ndl 11 (75) Mdium Flannl, Vlou, Vlv, Muslin, Vlvn, Poplin, Coduoy, Boadcloh, Linn, Chinz, Gabadin, Fl, Ty, Bulap, Quild Fabics Univsal 14 (90) Doubl Knis, (synhic and naual) Sch Vlou, Sch Ty, Sa Knis Ball Poin 14 (90) Lah, Vinyl, Sud Wdg Poin Lah Ndl 14 (90) Havy Dnim, Sailcloh, Ticking Doubl Facd Wool, Havy Coaing, Fak Fu, Dapy Fabics Dnim Ndl Univsal 16 (100) 16 (100) Lah, Sud Wdg Poin Lah Ndl 16 (100) 18 (110) Vy Havy Canvas, Duck, Upholsy Fabics Univsal 16 (100) Topsiching fo Spcial Finishs Topsiching Ndl 14 (90) 7

10 Winding h Bobbin (A) (B) Sing h spool Plac a spool of had on h spool pin ih h had coming off h spool as illusad. A: Pss h lag spool hold fimly agains h spool of had. Lag spool hold B: Fo a small spool, us h small spool hold. Small spool hold Addiional spool pin Th addiional spool pin is fo bobbin inding ihou unhading h machin. Ins h addiional spool pin ino h hol. Plac h fl and a spool on h pin. Addiional spool pin Spool pin fl Spool pin hol Rmoving h bobbin z Push h hook cov pla las buon o h igh and mov h cov pla. Hook cov pla las buon Hook cov pla x Lif ou h bobbin. Bobbin 8

11 Winding h bobbin z z Pull ou h handhl o disngag h cluch. Handhl x c x Da h had fom h spool. Guid h had aound h bobbin ind had guid. Bobbin ind had guid v n b m c Thad hough h hol in h bobbin fom h insid o h ousid. Pu h bobbin on h bobbin ind spindl ih h f nd of h had coming ou a h op. Bobbin ind spindl v Push h bobbin o h igh. NOTE: Do no mov h bobbin ind spindl hil h machin is unning. b Wih h f nd of h had hld in you hand, dpss h foo conol. Sop h machin hn h bobbin has bn ound a f lays, and cu h had clos o h bobbin. n Dpss h foo conol again. Whn h bobbin is fully ound, i ill sop auomaically. Run h bobbin ind o is oiginal posiion by moving h spindl o h lf, and cu h had as illusad. m Push in h handhl o ngag h cluch. 9

12 z Insing h bobbin z Plac h bobbin in h bobbin hold ih h had unning off as illusad. Thad x x Guid h had ino h fon noch on h fon sid of h bobbin hold. Da h had o h lf, sliding i bn h nsion sping blads. Fon noch Tnsion sping blad c c Coninu o da h had lighly unil h had slips ino h sid noch. Sid noch v v Pull ou abou 4 (10 cm) of had. Aach h hook cov pla. Chck h hading by fing o h cha shon on h hook cov pla. Thad y Hook cov pla y 10

13 c z Thading h Machin To s h ndl had: Rais h had ak-up lv o h highs posiion by uning h handhl. Rais h pss foo. v x b z z Da h had fom h spool and pass i und h had guid. Thn da i don along h igh channl. Thad guid Righ channl x x Da h had up aound h boom of h had guid pla. Pull h had up along h lf channl Thad guid pla Lf channl c c Fimly da h had fom igh o lf ov h had ak-up lv and don ino h ak-up lv y. Thad ak-up lv v b y v Da h had don along h lf channl and slip h had bhind h ndl ba had guid fom h lf. y Ndl ba had guid b Pass h had hough h ndl y fom h fon o us h ndl had (f o h nx pag). 11

14 z Daing up h Bobbin Thad z Rais h pss foo and hold h ndl had lighly ih you lf hand. Ndl had x x Tun h handhl sloly oad you on compl un. Bing h bobbin had up by pulling h ndl had as illusad. Ndl had Bobbin had c c Pull 4 (10 cm) of boh hads back and und h pss foo. 12

15 Slcing h Sich Pan Rais h ndl o is highs posiion. Pan Slco Dial Tun h pan slco dial o s h symbol of h dsid sich pan a h sing mak. Pan slco dial Sing mak CAUTION: Do no un h pan slco dial hil h ndl is in h fabic, ohis h ndl may bnd o bak. To slc h sch sich pans, s h sich lngh dial a S.S. Sch sich pans Sich Lngh Dial Tun h sich lngh dial o s h dsid sich lngh numb a h sing mak. Th high h numb, h long h sich Th mak shos h adjusmn ang hn sing h buonhol. Sing mak Sich lngh dial 13

16 Adjusing sch sich balanc If h sch sich pans a unvn hn you s on a paicula fabic, coc hm by uning h sich lngh dial. + If h pans a dan ou, coc hm by sing h dial o h sid. If h pans a compssd, coc hm by sing h dial o h + sid. Sich Widh Dial Tun h sich idh dial o s h dsid sich idh numb a h sing mak. Th high h numb, h id h sich Sich idh dial Sing mak CAUTION: Do no un h sich idh dial hil h ndl is in h fabic, ohis h ndl may bnd o bak. Vaiabl ndl posiion Th ndl dop posiion of h saigh sichs can b movd bn h cn (5) and lf (0) ih h sich idh dial. 14

17 Balancing Ndl Thad Tnsion Th had nsion should b adjusd dpnding on h sing maials, lays of fabic and sing mhod. To adjus h had nsion, un h nsion dial. Tnsion dial Balancd nsion: Th idal saigh sich has hads lockd bn o lays of fabic, as illusad. Fo an idal zigzag sich, h bobbin had dos no sho on h igh sid (op sid) of h fabic, and h ndl had shos slighly on h ong sid (boom sid) of h fabic. Ndl had (Top had) Bobbin had (Boom had) Righ sid (Top sid) of fabic Wong sid (Boom sid) of fabic Ndl had nsion is oo igh: Th bobbin had (boom had) ill appa on h igh sid (op sid) of h fabic. Loosn h ndl had nsion by moving h dial o a lo numb. Ndl had nsion is oo loos: Th ndl had (op had) ill fom loops on h ong sid (boom sid) of h fabic. Tighn h ndl had nsion by moving h dial o a high numb. 15

18 SECTION 3. BASIC SEWING Saigh Sich Sing Machin sing: Sich pan: A Sich idh: 0 o 5 Sich lngh: Thad nsion: 2 6 Pss foo: Zigzag foo A Saing o s Rais h pss foo and plac h fabic und h foo. Lo h ndl ino h fabic. Lo h pss foo and smooh h hads oad h back. Dpss h foo conol. NOTES: Da h hads o h lf hn sing ih h buonhol foo. To fasn h bginning of h sam, fis s sval sichs in vs hn s foad. Changing h sing dicion Sop h machin and un h handhl oad you o bing h ndl don ino h fabic. Rais h pss foo. Pivo h fabic aound h ndl o chang sing dicion as dsid. Lo h pss foo and coninu sing in h n dicion. Finishing sing Pss h vs sich lv and s sval sichs in vs a h nd of h sam. Rais h pss foo and mov h fabic, daing h hads o h back. Da h hads up and ino h had cu. Th hads a cu h pop lngh fo saing h nx sam. Thad cu 16

19 Sam guids on h ndl pla Th sam guids on h ndl pla hlp you o masu sam alloanc. Th numbs indica h disanc bn h cn ndl posiion and h sam guid. Sam guids Numb /8 5/8 6/8 Spacing (cm) Spacing (inch) 1/2 5/8 3/4 Tuning a sua con Th coning guid hlps you mainain a 5/8 (1.6 cm) sam alloanc hn sing a con. Whn h fabic dg facing you lins up ih h coning guid as illusad, sop siching and lo h ndl ino h fabic by uning h handhl oad you. Rais h pss foo and pivo h fabic so h dg of h fabic ill align ih h 5/8 (1.6 cm) sam guid. Lo h pss foo and sa siching in h n dicion. Coning guid 17

20 SECTION 4. UTILITY STITCHES Basic Zigzag Machin sing Sich pan: C Sich idh: 1 5 Sich lngh: Thad nsion: 2 5 Pss foo: Zigzag foo A Simpl zigzag siching is idly usd fo ovcasing, sing on buons c. Adjus h sich lngh o sui you sing nds. NOTE: Us a sabiliz fo sch fabics such as ico and knis o pvn pucking. Ovcasing Machin sing Sich pan: C Sich idh: 5 Sich lngh: 1 2 Thad nsion: 3 7 Pss foo: Zigzag foo A Ovcasing is usd o pvn fabics fom avling a a dgs. I can b usd o finish a hm dg. 18

21 Kni Sich Machin sing Sich pan: G Sich idh: 5 Sich lngh: S.S. Thad nsion: 3 7 Pss foo: Zigzag foo A This sich is idal fo finishing dgs of sch fabics. I sams and finishs h fabic dgs simulanously. Tico Sich (Mulipl Zigzag Sich) Machin sing Sich pan: D Sich idh: 3 5 Sich lngh: Thad nsion: 3 6 Pss foo: Zigzag foo A This sich is usd o finish a a dg on synhics and oh fabics ha nd o puck. Plac h fabic o lav a 5/8 (1.6 cm) alloanc. Tim h xa alloanc af sing. I is also usd fo mnding as. 19

22 Saigh Sch Sich Machin sing Sich pan: A Sich idh: 0 o 5 Sich lngh: S.S. Thad nsion: 2 5 Pss foo: Zigzag foo A Th pan is sn ih o sichs foad and on sich backad, foming a sam ha dos no ip asily. Us i o infoc aas such as coch and amhol sams. Also us i hn consucing ims such as backpacks fo xa sngh. Cafully guid h fabic hil sing as h fabic movs back and foh. Zigzag Sch Sich Machin sing Sich pan: C Sich idh: 2 5 Sich lngh: S.S. Thad nsion: 2 5 Pss foo: Zigzag foo A S on sch fabics in any aa ha you migh us a zigzag sich. This sich is usd as a dcoaiv opsich as ll. 20

23 Buon Sing Machin sing Sich pan: C Sich idh: Adjus as ncssay Sich lngh: Any Thad nsion: 3 7 Pss foo: Zigzag foo A y Fd dog: Lod y Unhad h ndl. Adjus h sich idh o mach i ih h span of h hols in h buon. Tun h handhl o chck if h ndl ns ino ach hol in h buon. Lo h foo o hold h buon in plac. Th hols in h buon should align ih h slo of h foo. A pin can b placd on h foo o fom a shank. Mak su o chck if h ndl ns ino boh hols in h buon. Pin R-had h ndl and s abou 10 sichs and cu h ndl and bobbin hads a h bginning. Rais h pss foo and mov h fabic. Cu h ndl and bobbin hads laving 8 (20 cm) ails. Bing h ndl had bn h buon and fabic hough h hols in h buon. Pull h ndl had o pick bobbin had up o h igh sid of h fabic. Wind h hads o fom a shank and i hm ogh. Ndl had Bobbin had NOTE: Rais h fd dog af sing. 21

24 4-Sp Buonhol Machin sing Sich pan: Sich idh: 4 5 Sich lngh: Thad nsion: 1 5 Pss foo: Sliding buonhol foo J z x c v b z S h pan slco dial a. Cafully mak buonhol lngh on fabic. Plac h fabic und h foo ih h buonhol making unning oad you. Da boh of ndl and bobbin had o h lf. Mov h slid oad you so ha h op mak on h slid ms h sa mak. Sa mak Top mak Ndl had Bobbin had NOTE: Th scal on h slid is ngavd in cnims. x S foad unil you ach h fon making of you buonhol. Sop sing a a lf sich. n c Rais h ndl o is highs posiion. S h pan slco dial a. S 5 sichs, hn sop sing a a igh sich. v Rais h ndl o is highs posiion. S h pan slco dial a. S unil h ndl ach h back making of buon hol. u y i b Rais h ndl o is highs posiion. S h pan slco dial a. S 5 sichs, hn sop sing. S h sich lngh dial o 0 and h pan slco dial a saigh sing. S a f locking sichs. n Rais h ndl and pss foo. Rmov h fabic fom h machin and cu h sing had. Ins a pin insid h baack. Thn cu h opning ih a sam ipp. Tak ca no o cu h sichs. Ndl had y Bobbin had 22 To adjus buonhol sich dnsiy: S h sich lngh dial bn adjus h buonhol sich dnsiy. u Dns buonhol i Coas buonhol o

25 Codd Buonhol Machin sing Sich pan: Sich idh: 4 5 Sich lngh: Thad nsion: 1 5 Pss foo: Sliding buonhol foo J z z Wih h buonhol foo aisd, hook h fill cod on h spu a h back of h foo. Bing h nds oad you und h foo, claing h fon nd. Hook h fill cod ino h foks on h fon of h foo o hold hm igh. Spu Foks x x Da boh of ndl and bobbin had o h lf. Mov h slid oad you so ha h op mak on h slid ms h sa mak. Sa mak Top mak Ndl had y Bobbin had c y Lo h ndl ino h fabic a h sing poin and lo h foo. Dpss h foo conol gnly and s h buonhol ov h cod. Th sing sunc is h sam as h 4- sp buonhol. c Pull h lf nd of h fill cod o ighn i and cu h xcss ails. To cu h buonhol opning, f o h insucions on pag

26 Zipp Applicaion Machin sing Sich pan: A Sich idh: 5 Sich lngh: Thad nsion: 3 6 Pss foo: Zipp foo E Aaching h zipp foo A: To s h lf sid of h zipp, aach zipp foo ih h igh sid pin. B: To s h igh sid of zipp, aach h zipp foo ih h lf sid pin. Goov Pin (A) (B) Fabic ppaaion z x i o!3!1!0!4!2 u y z Add 3/8 (1 cm) o h zipp siz. This is h ovall opning siz. Righ sid of h fabic 3/8 (1 cm) Opning siz Zipp siz Slid y Zipp h u Zipp ap i Wong sid of h fabic o End of h opning x Plac h igh (op) sids of h fabic ogh. S a boom sam 5/8 (2 cm) fom h igh dg o h zipp boom sop posiion. S a f sichs in vs o lock. Incas h sich lngh o 4, s ndl had nsion o 1, and bas h ni lngh of h fabic.!0 5/8 (2 cm)!1 Basing!2 Rvs sich!3 End of h opning!4 Boom sam 24

27 z To s x i u y z Aach zipp foo ih h igh sid pin. Fold back h upp lay sam alloanc. Fold back h lo lay sam alloanc o lav a 1/8 (0.4 cm) magin of fabic. Lo lay End of h opning Zipp h 1/8 (0.4 cm) magin Upp lay y Opning siz u Foldd dg i Basing x Plac zipp h nx o magin dg and bas h zipp ap o h lo fabic lay. Align zipp foo ih magin dg. Run had nsion and sich lngh o oiginal sings. S a sam h ni lngh of zipp ap. c o c Sop h machin 2 (5 cm) bfo aching h slid, ih ndl in h fabic and ais h foo, hn unzip a f inchs o cla a pah fo siching. o Slid!0 2 (5 cm)!0 v o v Rmov fabic and clos zipp. Tak h upp fabic lay and lay i fla ov h zipp. Bas h zipp ap o h upp fabic lay.!1 Basing!2 Zipp ap!1!2 25

28 b!4!3 b Rais and las h foo, and -aach i ih h lf sid pin. Saing jus blo zipp boom sop, s acoss fabic o abou 3/8 (1 cm) disanc fom h basing lin. Tun fabic 90 dgs and s a sam h ni lngh of h zipp ap. Bfo aching h slid, sop h machin ih ndl in fabic and ais h foo. Us sam ipp o opn a f inchs of basing sich.!3 Unsich basing!4 3/8 (1 cm) n n Unzip a f inchs o cla a pah fo siching. A nd of sam, s a f sichs in vs o lock. Onc boh sids of zipp a sn, us h sam ipp o opn h basing sich. 26

29 Blind Hmming Machin sing Sich pan: E o F Sich idh: 3 5 Sich lngh: 2 3 Thad nsion: 1 4 Pss foo: Blind hmming foo G z z On havy igh fabics ha avl, h a dg should b ovcas fis. Fold h hm und h fabic as illusad fo fin o mdium fabics. Fold a hm ih h ong sid up foming a 1/8 (0.5 cm) alloanc. Wong sid of h fabic 1/8 (0.5 cm) Havy igh fabic Fin and mdium igh fabic x x Plac h fabic so ha h ndl jus pics h foldd dg hn h ndl coms ov h xm lf sid. Lo h pss foo. c v i y u c Tun h sc o align h guid on h foo ih h foldd dg so ha h ndl jus pics h fold. If h ndl pics oo fa lf, mov h guid slighly o h lf. If h ndl misss h fold, mov h guid slighly o h igh. S sloly hil guiding h foldd dg along h guid. Sc y Guid u Foldd dg v Opn and pss h fabic af sing is finishd. i Righ sid of h fabic NOTE: If h ndl dops oo fa lf, h sichs ill b appan on h igh sid of h fabic. 27

30 SECTION 5. DECORATIVE STITCHES Dcoaiv Sain Sichs Machin sing Sich pan: J Sich idh: 3 5 Sich lngh: Thad nsion: 1 4 Pss foo: Zigzag foo A Dmin h appopia sich dnsiy by s sing. Fo a dlica appaanc on fabic such as chiffon, us a singl lay ih a a-aay backing, if ncssay. Rduc h ndl had nsion slighly o achiv h b sul. Dcoaiv Sch Sichs Machin sing Sich pan: A J Sich idh: 5 Sich lngh: S.S. Thad nsion: 1 4 Pss foo: Zigzag foo A Dcoaiv sch pans a usd fo adding a caiv and psonalizd ouch o ims. Cafully guid h fabic hil sing as h fabic movs back and foh. 28

31 Smocking Machin sing Sich pan: D Sich idh: 5 Sich lngh: S.S. Thad nsion: 1 4 Pss foo: Zigzag foo A Sp 1: Choos a sof and lighigh fabic such as bais, gingham o challis. Cu h fabic h ims id han h pojc idh. Incas h sich lngh o 4 and loosn had nsion o 1. S os of saigh sichs 3/8 (1 cm) apa acoss h aa o b smockd. 3/8 (1 cm) Sp 2: Kno h hads along on nd. Fom h oh nd, pull h bobbin hads o disibu gahs vnly and scu h hads. Run h had nsion o h oiginal sing. S os of h smocking sich bn h gahing sichs. Rmov h gahing sichs af finishd. 29

32 Pin Tucking Machin sing Sich pan: A Sich idh: 0 o 5 Sich lngh: Thad nsion: 2 6 Pss foo: Blind hmming foo G Fold a fabic ong sid ogh and Lo h ndl ino h fabic cm insid h foldd dg. Lo h foo and un h sc o align h guid on h foo ih h foldd dg. S sloly hil guiding h foldd dg along h guid. Opn h fabic and ion pss h ucks. Sc Guid Foldd dg Shll Tucking Machin sing Sich pan: G Sich idh: 5 Sich lngh: 2 3 Thad nsion: 6 8 Pss foo: Zigzag foo A Us a lighigh fabic (ico, fo xampl). Fold and sich on h bias. Whn h ndl sings o h igh, allo h ndl o jus cla h foldd dg of h fabic. Af siching, opn h fabic and ion pss h ucks fla o on sid. NOTE: Incas h ndl had nsion o fom pominn ucks. 30

33 Fagoing Machin sing Sich pan: H Sich idh: 3 5 Sich lngh: 1 3 Thad nsion: 1 4 Pss foo: Zigzag foo A Us his sich o join o pics of fabic o ca an opn ok appaanc, and add dsign ins. Fold und ach fabic dg 1/2 (1.3 cm) and pss. Pin h o dgs o a pic of pap o aaay backing 1/8 (0.3 cm) apa. Pap S sloly, guiding h fabic so h ndl cachs h foldd dg on ach sid. Ta aay h backing af sing is finishd. Pachok Machin sing Sich pan: D Sich idh: 5 Sich lngh: 1 3 Thad nsion: 1 4 Pss foo: Zigzag foo A Plac o lays of h fabic ih h igh sid ogh. Sam along h dgs ih h saigh sich. Opn fabics fla and fold ach sam alloancs. 31 Plac h fabic und h foo so ha h sam lin machs h cn of h foo idh. Lo h foo and s h pan along h sam lin. Righ sid of h fabic

34 SECTION 6. CARE AND MAINTENANCE WARNING: Tun h po sich off and unplug h machin bfo claning. NOTE: Do no dismanl h machin in any ay oh han ha is xplaind in his scion. z x Clan h ousid of h machin ih a sof cloh and mild soap. Claning h Hook Rac and Fd Dogs z Rmov h pss foo and ndl. Rmov sc on h ndl pla ih h scdiv. Rmov h ndl pla and ak ou h bobbin. Sc x Lif up h bobbin hold and mov i. Bobbin hold c v c Bush ou dus and lin. Wip h bobbin hold ih a sof, dy cloh. b v Clan h fd dogs and hook ac ih h lin bush. Lin bush Fd dogs b Wip h hook ac ih a sof, dy cloh. Hook ac NOTE: You may also us a vacuum clan. 32

35 Rplacing h Bobbin Hold z z Ins h bobbin hold ino h hook ac. x x Mak su h knob of h bobbin hold fis nx o h sopp on h ac. Knob Sopp c c Rplac h bobbin. Aach h ndl pla, insing h o guid pins ino h hols in h ndl pla. Tighn h sc fimly ih h scdiv. Guid hols Sc Rplacing h Ligh Bulb WARNING: Whn placing h bulb, sich off and unplug h machin. Wai fo h ligh bulb o cool don bfo ouching i. Rmov h cap and sc. Rmov h fac pla. Cap Sc Fac pla Push and un h bulb counclockis o mov i. Push and un h bulb clockis o plac i. Ligh bulb 33

36 Toublshooing Condiion Caus Rfnc Th ndl had 1. Th ndl had is no hadd poply. Pag 11 baks. 2. Th ndl had nsion is oo igh. Pag Th ndl is bn o blun. Pag 7 4. Th ndl is incocly insd. Pag 7 5. Th ndl had and h bobbin had a no dan o h a and s poply und h pss foo hn saing sing. Pag Th fabic is no dan o h a hn sing is finishd. Pag Th had is oo havy o oo fin fo h ndl. Pag 7 Th bobbin had baks. Th ndl baks. 1. Th bobbin had is no hadd poply in h bobbin hold. 2. Lin has collcd in h bobbin hold. 3. Th bobbin is damagd and dos no un smoohly. 4. Th had is ound loosly on h bobbin. 1. Ndl is incocly insd. 2. Th ndl is bn o blun. 3. Th ndl clamp sc is loos. 4. A pop foo is no usd. 5. Th fabic is no dan o h a hn sing is finishd. 6. Th ndl is oo fin fo h fabic bing sn. Pag 10 Pag 32 Rplac h bobbin R-ind h bobbin. Pag 7 Pag 7 Pag 7 Us pop foo. Pag 16 Pag 7 Th ndl had loops. Skippd sichs Sam pucking Th cloh is no fd smoohly. Th machin dos no ok. Pans a disod. Th buonhol is no sn ll. Noisy opaion 1. Th ndl had nsion is oo loos. 2. Th ndl siz is no suiabl fo h had. 1. Th ndl is incocly insd. 2. Th ndl is bn o blun. 3. Th ndl and/o had a no suiabl fo h fabic bing sn. 4. A blu ip ndl is no usd fo sing sch, vy fin fabics and synhics. 5. Th ndl had is no hadd poply. 6. A poo ualiy ndl is usd. 1. Th ndl had nsion is oo igh. 2. Th ndl had is no hadd poply. 3. Th ndl is oo havy fo h fabic bing sn. 4. Th sich lngh is oo long fo h fabic. * Us a sabiliz fo vy fin fabics. 1. Th fd dog is packd ih lin. 2. Th sichs a oo fin. 3. Th fd dog as no aisd af bing lod. 4. Th foo pssu is no adjusd poply. 1. Th machin is no pluggd in. 2. Thad is caugh in h hook ac. 3. Th handhl is pulld fo bobbin inding. 1. Th sich is no balancd. 1. Th sich dnsiy is no suiabl fo h fabic bing sn. 2. Infacing is no bing usd ih sch fabics. 1. Th fd dog is packd ih lin. 2. Lin has collcd in h bobbin hold. Pag 15 Pag 7 Pag 7 Pag 7 Pag 7 Pag 7 Pag 11 Rplac h ndl Pag15 Pag 11 Pag 7 Mak sich sho Pag 32 Mak sich long Pag 5 Pag 5 Pag 4 Pag 32 Pag 9 Pag 14 Pag 22 Pag Us infacing Pag 32 Pag 32 34

37 XXX (EN) Pind in Thailand