User Manual Revision English

Size: px
Start display at page:

Download "User Manual Revision 1.000 English"

Transcription

1 Document code: MN67613_ENG Revision Page 1 of 24 User Manual Revision English PROFINET / SNMP - Converter (Order Code: HD67613-A1) For Website information: For Price information: Benefits and Main Features: Very easy to configure Triple Electrical isolation Temperature range: -40 C/+85 C (-40 F/+185 F) For other PROFINET products see also the following link: Converter PROFINET to (NMEA 2000) (Serial) (Modbus Master) (Modbus Slave) (PROFIBUS Master) (PROFIBUS Slave) (CAN) (CANopen) (DeviceNet Master) (DeviceNet Slave) (J1939) (Modbus TCP Master) (Modbus TCP Slave) (BACnet Slave) (BACnet Master) (KNX) Do you have your customer protocol? Then go to: User Manual Do you need to choose a device? Do you want help?

2 INDEX: Page INDEX 2 UPDATED DOCUMENTATION 2 REVISION LIST 2 WARNING 2 TRADEMARKS 2 SECURITY ALERT 3 EXAMPLES OF CONNECTION 4 CONNECTION SCHEME 5 CHARACTERISTICS 6 CONFIGURATION 6 POWER SUPPLY 7 FUNCTION MODES 8 LEDS 9 ETHERNET 10 USE OF COMPOSITOR SW NEW CONFIGURATION / OPEN CONFIGURATION 12 SOFTWARE OPTIONS 13 SET COMMUNICATION 14 PROFINET XML 15 UPDATE DEVICE 16 SNMP COMMUNICATION 18 MECHANICAL DIMENSIONS 21 ORDERING INFORMATIONS 22 ACCESSORIES 22 DISCLAIMER 23 OTHER REGULATIONS AND STANDARDS 23 WARRANTIES AND TECHNICAL SUPPORT 24 RETURN POLICY 24 Document code: MN67613_ENG Revision Page 2 of 24 UPDATED DOCUMENTATION: Dear customer, we thank you for your attention and we remind you that you need to check that the following document is: Updated Related to the product you own To obtain the most recently updated document, note the document code that appears at the top right-hand corner of each page of this document. With this Document Code go to web page and search for the corresponding code on the page. Click on the proper Document Code and download the updates. REVISION LIST: Revision Date Author Chapter Description /05/2015 Ff All First Release WARNING: ADFweb.com reserves the right to change information in this manual about our product without warning. ADFweb.com is not responsible for any error this manual may contain. TRADEMARKS: All trademarks mentioned in this document belong to their respective owners.

3 Document code: MN67613_ENG Revision Page 3 of 24 SECURITY ALERT: GENERAL INFORMATION To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and safety regulation are required for each individual application. The same applies also when using accessories. INTENDED USE Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e. independent limit switches, mechanical interlocks, etc.). QUALIFIED PERSONNEL The device can be used only by qualified personnel, strictly in accordance with the specifications. Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and who have appropriate qualifications for their job. RESIDUAL RISKS The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and operated by untrained personnel. These instructions refer to residual risks with the following symbol: This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or death and / or the possibility of damage. CE CONFORMITY The declaration is made by our company. You can send an to support@adfweb.com or give us a call if you need it.

4 Document code: MN67613_ENG Revision Page 4 of 24 EXAMPLES OF CONNECTION:

5 Document code: MN67613_ENG Revision Page 5 of 24 CONNECTION SCHEME: Figure 1: Connection scheme for HD67613-A1

6 Document code: MN67613_ENG Revision Page 6 of 24 CHARACTERISTICS: The HD67613-A1 is a PROFINET / SNMP Converter. It allows for the following characteristics: Up to 1440 bytes in reading and 1440 bytes in writing; Isolation between Ethernet - Power Supply; Two-directional information between SNMP bus and PROFINET bus; Mountable on 35mm Rail DIN; Wide power supply input range: 8 24V AC or 12 35V DC; Wide temperature range: -40 C / 85 C [-40 F / +185 F]. CONFIGURATION: You need Compositor SW67613 software on your PC in order to perform the following: Define the parameters of PROFINET line; Define the parameters of SNMP line; Update the device.

7 Document code: MN67613_ENG Revision Page 7 of 24 POWER SUPPLY: The devices can be powered at 8 24V AC and 12 35V DC. For more details see the two tables below. VAC VDC Vmin Vmax Vmin Vmax 8V 24V 12V 35V Consumption at 24V DC: Device Consumption [W/VA] HD67613-A1 3.5 Caution: Do not reverse the polarity power HD67613-A1

8 Document code: MN67613_ENG Revision Page 8 of 24 FUNCTION MODES: The device has got two function modes depending on the position of the Dip2 of Dip-Switch A : The first, with Dip2 of Dip-Switch A at OFF position, is used for the normal working of the device. The second, with Dip2 of Dip-Switch A at ON position, is used for uploading the Project and/or Firmware. For the operations to follow for the updating, see UPDATE DEVICE section. According to the functioning mode, the LEDs will have specific functions, see LEDS section. Warning: Dip1 of Dip-Switch A must be at ON position to work even if the Ethernet cable is not inserted.

9 Document code: MN67613_ENG Revision Page 9 of 24 LEDS The device has got six LEDs that are used to give information about the functioning status. The various meanings of the LEDs are described in the table below. 1: ON [supply voltage ] (green) LED Normal Mode Boot Mode ON: Device powered OFF: Device not powered ON: Device powered OFF: Device not powered 2: MT [maintenance display] (yellow) 3: BF [bus fault] (red) 4: SF [group error] (red) ON: Maintenance problem is present OFF: No maintenance problems are present ON: The Ethernet connection is defective; the IP address exists several times in the network; the own NameOfStation exists several times in the network; no IP address has been set Flashing: At least one configured AR is no longer in the data exchange OFF: No errors are present ON: At least one AR is not in the data exchange OFF: No errors are present Blinks quickly: Boot state Blinks very slowly (~0.5Hz): update in progress Blinks quickly: Boot state Blinks very slowly (~0.5Hz): update in progress Blinks quickly: Boot state Blinks very slowly (~0.5Hz): update in progress 5: Ethernet1 Tx (green) Blinks when Ethernet frames are transmitted 6: Ethernet2 Tx (green) Blinks when Ethernet frames are transmitted Blinks quickly: Boot state Blinks very slowly (~0.5Hz): update in progress Blinks quickly: Boot state Blinks very slowly (~0.5Hz): update in progress

10 Document code: MN67613_ENG Revision Page 10 of 24 ETHERNET: The PROFINET and SNMP connection and the updating of the converters must be made using Connector3 and/or Connector4 of HD67613-A1 with at least a Category 5E cable. The maximum length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To connect the device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is recommended the use of a cross cable.

11 Document code: MN67613_ENG Revision Page 11 of 24 USE OF COMPOSITOR SW67613: To configure the Converter, use the available software that runs with Windows called SW It is downloadable on the site and its operation is described in this document. (This manual is referenced to the last version of the software present on our web site). The software works with MSWindows (XP, Vista, Seven, 8; 32/64bit). When launching the SW67613, the window below appears (Fig. 2). Note: It is necessary to have installed.net Framework 4. Figure 2: Main window for SW67613

12 Document code: MN67613_ENG Revision Page 12 of 24 NEW CONFIGURATION / OPEN CONFIGURATION: The New Configuration button creates the folder which contains the entire device s configuration. A device s configuration can also be imported or exported: To clone the configurations of a programmable PROFINET / SNMP - Converter in order to configure another device in the same manner, it is necessary to maintain the folder and all its contents; To clone a project in order to obtain a different version of the project, it is sufficient to duplicate the project folder with another name and open the new folder with the button Open Configuration.

13 Document code: MN67613_ENG Revision Page 13 of 24 SOFTWARE OPTIONS: By pressing the Settings ( ) button there is the possibility to change the language of the software and check the updatings for the compositor. In the section Language it is possible to change the language of the software. In the section Connection Options, it is possible to check if there are some updatings of the software compositor in ADFweb.com website. Checking the option Check Software Update at Start of Program, the SW67613 check automatically if there are updatings when it is launched.

14 Document code: MN67613_ENG Revision Page 14 of 24 SET COMMUNICATION: This section define the fundamental communication parameters of two buses, PROFINET and SNMP. By Pressing the Set Communication button from the main window for SW67613 (Fig. 2) the window Set Communication appears (Fig. 3). The means of the fields for PROFINET are: In the fields IP ADDRESS insert the IP address that you want to give to the PROFINET side; In the fields SUBNET Mask insert the SubNet Mask; In the fields GATEWAY insert the default gateway that you want to use. This feature can be enabled or disabled pressing the Check Box field. This feature is used for going out of the net; In the field Port the port number used for PROFINET communication is defined (fixed at 34964); In the field "PROFINET Name of Station" is possible to assign a name to the PROFINET node; In the fields Number Byte IN insert the number of input byte of the slave station; In the fields Number Byte Out insert the number of output byte of the slave station. The means of the fields for the SNMP section are: In the fields IP ADDRESS insert the IP address that you want to give to the SNMP side; In the fields SUBNET Mask insert the SubNet Mask; In the fields GATEWAY insert the default gateway that you want to use. This feature can be enabled or disabled pressing the Check Box field. This feature is used for going out of the net; In the field Auxiliary Integer Dimension is possible to define the dimension of the Integer values in the Data Blocks of SNMP (see page 18 for more info). Figure 3: Set Communication window

15 Document code: MN67613_ENG Revision Page 15 of 24 XML FILE: By Pressing the PROFINET XML button from the main window for SW67613 (Fig. 2) it is possible to generate the xml file to be imported into the master PROFINET. Figure 4: PROFINET XML File Name window

16 Document code: MN67613_ENG Revision Page 16 of 24 UPDATE DEVICE: By pressing the Update Device button, it is possible to load the created Configuration into the device; and also the Firmware, if necessary. If you don t know the actual IP address of the device you have to use this procedure: Turn off the Device; Put Dip2 of Dip-Switch A in ON position; Turn on the device Connect the Ethernet cable; Insert the IP ; Press the Ping button, Device Found! must appear ; Press the Next button; Select which operations you want to do; Press the Execute update firmware button to start the upload; When all the operations are OK turn off the Device; Put Dip2 of Dip-Switch A in OFF position; Turn on the device. At this point the configuration/firmware on the device is correctly updated. Figure 5: Update device windows

17 Document code: MN67613_ENG Revision Page 17 of 24 If you know the actual IP address of the device, you have to use this procedure: Turn on the Device with the Ethernet cable inserted; Insert the actual IP of the Converter; Press the Ping button, must appear Device Found! ; Press the Next button; Select which operations you want to do; Press the Execute update firmware button to start the upload; When all the operations are OK the device automatically goes at Normal Mode. At this point the configuration/firmware on the device is correctly update. Note: When you install a new version of the software, if it is the first time it is better you do the update of the Firmware in the HD67613 device. Note: When you receive the device, for the first time, you also have to update the Firmware in the HD67613 device. Warning: If Fig. 6 appears when you try to do the Update try these points before seeking assistance: Try to repeat the operations for the update; Try with another PC; Try to restart the PC; If you are using the program inside a Virtual Machine, try to use it in the main Operating System; If you are using Windows Seven or Vista or 8, make sure that you have the administrator privileges; Pay attention to the Firewall lock; Check the LAN settings. Figure 6: Protection window In the case of HD67613 you have to use the software SW67613 :

18 Document code: MN67613_ENG Revision Page 18 of 24 SNMP COMMUNICATION In order to read/write the data from/to PROFINET side, it is necessary to use specific SNMP commands in order to see the SNMP Input and write the SNMP Output. Reading PROFINET data from SNMP: In order to read the data from the HD67613-A1 it is necessary to use the snmpget command. The Input array is contained to this internal directory: x.0, where x is the number of data block. Each data block has a dimension of 128 bytes. Example: you want to read informations of the data block 3. The structure of the command to send is: snmpget v1 cprivate IP Address of the converter Figure 7a: MIB Tree Input

19 Document code: MN67613_ENG Revision Page 19 of 24 Writing PROFINET data from SNMP: In order to write the data to the HD67613-A1 it is necessary to use the snmpset command. The Output array is contained to this internal directory: x.0, where x is the number of data block. Each data block has a dimension of 128 bytes. Example: you want to write informations of the data block 3 with the data (ASCII). The structure of the command to send is: snmpset v1 cprivate IP Address of the converter s Figure 7b: MIB Tree Output

20 Document code: MN67613_ENG Revision Page 20 of 24 Note: The data blocks from 1 to 8 has the data represented in bytes. The data blocks from 9 to 15 has the data represented in Integer. The dimension of the Integer values depends on the number of bytes set in the field Auxiliary Integer Dimension in the section Set Communication. Note: It is possible to read an entire data block or only a specific byte/value. It depends on the MIB used: x.0: entire data block x.y: specific byte/value of the data block

21 Document code: MN67613_ENG Revision Page 21 of 24 MECHANICAL DIMENSIONS: Figure 8: Mechanical dimensions scheme for HD67613-A1

22 Document code: MN67613_ENG Revision Page 22 of 24 ORDERING INFORMATIONS: The ordering part number is formed by a valid combination of the following: HD67613 xx Connectors Type 1: Removable 5mm Screw Terminal Enclosure Type A: 1M, 35mm DIN Rail mounting Device Family HD67613: PROFNET / SNMP - Converter Order Code: HD67613-A1 - PROFINET / SNMP Converter ACCESSORIES: Order Code: AC mm Rail DIN - Power Supply 220/240V AC 50/60Hz 12 V AC Order Code: AC mm Rail DIN - Power Supply 110V AC 50/60Hz 12 V AC

23 Document code: MN67613_ENG Revision Page 23 of 24 DISCLAIMER: All technical content within this document can be modified without notice. The content of the document is a under continual renewal. For losses due to fire, earthquake, third party access or other accidents, or intentional or accidental abuse, misuse, or use under abnormal conditions repairs are charged to the user. will not be liable for accidental loss of use or inability to use this product, such as loss of business income. shall not be liable for consequences of improper use. OTHER REGULATIONS AND STANDARDS: WEEE INFORMATION Disposal of old electrical and electronic equipment (as in the European Union and other European countries with separate collection systems). This symbol on the product or on its packaging indicates that this product may not be treated as household rubbish. Instead, it should be taken to an applicable collection point for the recycling of electrical and electronic equipment. If the product is disposed correctly, you will help prevent potential negative environmental factors and impact of human health, which could otherwise be caused by inappropriate disposal. The recycling of materials will help to conserve natural resources. For more information about recycling this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. RESTRICTION OF HAZARDOUS SUBSTANCES DIRECTIVE The device respects the 2002/95/EC Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (commonly referred to as Restriction of Hazardous Substances Directive or RoHS). CE MARKING The product conforms with the essential requirements of the applicable EC directives.

24 Document code: MN67613_ENG Revision Page 24 of 24 WARRANTIES AND TECHNICAL SUPPORT: For fast and easy technical support for your ADFweb.com SRL products, consult our internet support at Otherwise contact us at the address RETURN POLICY: If while using your product you have any problem and you wish to exchange or repair it, please do the following: Obtain a Product Return Number (PRN) from our internet support at Together with the request, you need to provide detailed information about the problem. Send the product to the address provided with the PRN, having prepaid the shipping costs (shipment costs billed to us will not be accepted). If the product is within the warranty of twelve months, it will be repaired or exchanged and returned within three weeks. If the product is no longer under warranty, you will receive a repair estimate. Via Strada Nuova, 17 IT Mareno di Piave TREVISO (Italy) Phone Fax

User Manual Revision 1.000 English

User Manual Revision 1.000 English Document code: MN67167_ENG Revision 1.000 Page 1 of 22 User Manual Revision 1.000 English Modbus TCP Slave / SNMP - Converter (Order Code: HD67167-A1) for Website information: www.adfweb.com?product=hd67167

More information

User Manual Revision 1.001 English

User Manual Revision 1.001 English Document code: MN67612_ENG Revision 1.001 Page 1 of 26 User Manual Revision 1.001 English PROFINET / Modbus TCP Slave - Converter (Order Code: HD67612-A1) For Website information: www.adfweb.com?product=hd67612

More information

User Manual Revision 1.000 English

User Manual Revision 1.000 English Document code: MN67605_ENG Revision 1.000 Pagina 1 di 22 User Manual Revision 1.000 English PROFINET / PROFIBUS Slave - Converter (Order Code: HD67605-A1) for Website information: www.adfweb.com?product=hd67605

More information

User Manual Revision 1.001 English

User Manual Revision 1.001 English Document code: MN67603_ENG Revision 1.001 Pagina 1 di 23 User Manual Revision 1.001 English PROFINET / Modbus Slave - Converter (Order Code: HD67603-A1) for Website information: www.adfweb.com?product=hd67603

More information

User Manual Revision 1.001 English

User Manual Revision 1.001 English Document code: MN67672_ENG Revision 1.001 Pagina 1 di 22 User Manual Revision 1.001 English BACnet / Modbus Slave - Converter (Order Code: HD67672-A1) for Website information: www.adfweb.com?product=hd67672

More information

User Manual Revision 1.002 English

User Manual Revision 1.002 English Document code: MN67075_ENG Revision 1.002 Page 1 of 15 User Manual Revision 1.002 English Modbus RTU / Modbus ASCII - Converter (Order Code: HD67075-A1) for Website information: www.adfweb.com?product=hd67075

More information

User Manual Revision 2.100 English

User Manual Revision 2.100 English Document code: MN67515_ENG Revision 2.100 Page 1 of 30 User Manual Revision 2.100 English CAN/ Modbus TCP Slave - Converter (Order Code: HD67515-A1, HD67515-B2) for Website information: www.adfweb.com?product=hd67515

More information

User Manual Revision 2.101 English

User Manual Revision 2.101 English Document code: MN67011_ENG Revision 2.101 Page 1 of 18 User Manual Revision 2.101 English CAN / Modbus Master - Converter (Order Code: HD67011) for Website information: www.adfweb.com?product=hd67011 HD67011

More information

User Manual Revision 2.002 English

User Manual Revision 2.002 English Document code: MN67513_ENG Revision 2.002 Page 1 of 17 User Manual Revision 2.002 English CAN / Ethernet - Converter (Order Code: HD67513-A1 HD67513-B2) for Website information: HD67513 www.adfweb.com?product=hd67513

More information

User Manual Revision 1.002 English

User Manual Revision 1.002 English Document code: MN67814_ENG Revision 1.002 Pagina 1 di 26 User Manual Revision 1.002 English Modbus TCP Master / KNX - Converter (Order Code: HD67814-KNX-B2) for Website information: www.adfweb.com?product=hd67814

More information

User Manual Revision 1.001 English

User Manual Revision 1.001 English Document code: MN67604_ENG Revision 1.001 Page 1 of 33 User Manual Revision 1.001 English PROFINET / PROFIBUS Master - Converter (Order Code: HD67604-A1) for Website information: www.adfweb.com/?product=hd67604

More information

User Manual Revision 1.100 English

User Manual Revision 1.100 English Document code: MN67225_ENG Revision 1.100 Page 1 of 30 User Manual Revision 1.100 English NMEA 2000 / Modbus TCP Slave - Converter (Order Code: HD67225-A1, HD67225-B2) for Website information: www.adfweb.com?product=hd67225-a1

More information

User Manual Revision 1.012 English

User Manual Revision 1.012 English Document code: MN67595_ENG Revision 1.012 Pagina 1 di 27 User Manual Revision 1.012 English EtherNet/IP / CAN - Converter (Order Code: HD67595-A1) for Website information: www.adfweb.com?product=hd67595

More information

User Manual Revision 2.002 English

User Manual Revision 2.002 English Document code: MN67221F_ENG Revision 2.002 Page 1 of 19 User Manual Revision 2.002 English CAN / Optic Fiber Repeater Extender bus line (With filter data configurable) (Order Code: HD67221F - HD67221FS)

More information

User Manual Revision 2.000 English

User Manual Revision 2.000 English Document code: MN67031_ENG Revision 2.000 Page 1 of 29 User Manual Revision 2.000 English M-Bus Analyzer / Scanner / Sniffer (Order Code: HD67031-B2-xxx) for Website information: www.adfweb.com?product=hd67031

More information

User Manual Revision 1.014 English

User Manual Revision 1.014 English Document code: MN67508_ENG Revision 1.014 Page 1 of 25 User Manual Revision 1.014 English Modbus TCP Slave / Modbus Master Converter (Ethernet Switch Inside for enter/exit connection) (Order Code: HD67508-A1-232,

More information

User Manual Revision 2.003 English

User Manual Revision 2.003 English Document code: MN67120_ENG Revision 2.003 Page 1 of 15 User Manual Revision 2.003 English RS232 / RS485 / Ethernet - Converter (Order Code: HD67120) for Website information: www.adfweb.com?product=hd67120

More information

User Manual Revision 2.001 English

User Manual Revision 2.001 English Document code: MN67020_ENG Revision 2.001 Page 1 of 11 User Manual Revision 2.001 English M-Bus Master / RS232 - Converter (Order Codes: HD67020-B2-3, HD67020-B2-10) for Website information: www.adfweb.com?product=hd67020

More information

User Manual Revision 1.003 English

User Manual Revision 1.003 English Document code: MN67812_ENG Revision 1.003 Pagina 1 di 28 User Manual Revision 1.003 English Modbus Master / KNX - Converter (Order Code: HD67812-KNX-232-B2, HD67812-KNX-485-B2) for Website information:

More information

User Manual Revision 2.011 English

User Manual Revision 2.011 English Document code: MN67648_ENG Revision 2.011 Page 1 of 38 User Manual Revision 2.011 English Ethernet / Serial - Converter ( Order Code: HD67648-A1-232 for Serial on RS232) ( Order Code: HD67648-A1-485 for

More information

User Manual Revision 1.002 English

User Manual Revision 1.002 English Document code: MN67513_ENG Revision 1.002 Page 1 of 15 User Manual Revision 1.002 English Gateway / Adapter CAN to Ethernet (Order Code: HD67513 HD67513M) HD67513 for Website HD67513 information: www.adfweb.com?product=hd67513

More information

User Manual Revision 1.113 English

User Manual Revision 1.113 English Document code: MN67507_ENG Revision 1.113 Page 1 of 25 User Manual Revision 1.113 English Modbus TCP Slave / Modbus Master - Converter (New Order Codes: HD67507-A1 HD67507-B2) (Old Order Codes: HD67507

More information

User Manual Revision 2.002 English

User Manual Revision 2.002 English Document code: MN67038_ENG Revision 2.002 Page 1 of 42 User Manual Revision 2.002 English RS232 / Ethernet - Converter ( Order Code: HD67038-2-A1 HD67038-2-B2 ) RS485/ Ethernet - Converter ( Order Code:

More information

User Manual Revision 2.100 English

User Manual Revision 2.100 English Document code: MN67507_ENG Revision 2.100 Page 1 of 35 User Manual Revision 2.100 English Modbus TCP Slave / Modbus Master - Converter (Order Code: HD67507-A1, HD67507-B2, HD67507-WiFi-A1) for Website

More information

User Manual Revision 1.001 English

User Manual Revision 1.001 English Document code: MN67302_ENG Revision 1.001 Page 1 of 35 User Manual Revision 1.001 English GSM I/O and Alarms Modem for Website information: www.adfweb.com?product=hd67302 for Price information: www.adfweb.com?price=hd67302-b2-02

More information

User Manual Revision 1.100 English

User Manual Revision 1.100 English Document code: MN67561_ENG Revision 1.100 Page 1 of 22 User Manual Revision 1.100 English PROFIBUS Slave / Modbus Master - Converter (Order Code: HD67561) for Website information: www.adfweb.com?product=hd67561

More information

User Manual Revision 1.400 English Converter / Adapter Ethernet to RS232 / RS485 (Order Code: HD67038-2 HD67038-2-M HD67038-25 HD67038-25-M)

User Manual Revision 1.400 English Converter / Adapter Ethernet to RS232 / RS485 (Order Code: HD67038-2 HD67038-2-M HD67038-25 HD67038-25-M) Document code: MN67038-2_ENG Revision 1.400 Page 1 of 25 User Manual Revision 1.400 English Converter / Adapter Ethernet to RS232 / RS485 (Order Code: HD67038-2 HD67038-2-M HD67038-25 HD67038-25-M) for

More information

User Manual Revision 1.100 English

User Manual Revision 1.100 English Document code: MN67324_ENG Revision 1.100 Page 1 of 40 User Manual Revision 1.100 English Modbus Master/Slave Datalogger (Order Code: HD67324-B2-E-232-2GB, HD67324-B2-E-485-2GB, HD67324-B2-U-232-2GB, HD67324-B2-U-485-2GB)

More information

User Manual Revision 1.003 English

User Manual Revision 1.003 English Document code: MN67701_ENG Revision 1.003 Page 1 of 47 User Manual Revision 1.003 English Copper / Optical Fiber - Converter ( Order Code: HD67701 - HD67702 ) for Website information: www.adfweb.com?product=hd67702-2

More information

User Manual Revision 2.201 English

User Manual Revision 2.201 English Document code: MN67117_ENG Revision 2.201 Page 1 of 14 User Manual Revision 2.201 English CANopen Repeater Small (Order Code: HD67117 HD67117M HD67117-M12 HD67117R) HD67117 HD67117M HD67117-M12 HD67117R

More information

User Manual Revision 1.012 English

User Manual Revision 1.012 English Document code: MN67316_ENG Revision 1.013 Page 1 of 41 User Manual Revision 1.012 English CAN Analyzer Hardware and Software (Order Codes: HD67316-U-D1 HD67316-E-A1) for Website information: www.adfweb.com?product=hd67316

More information

ZC-24DO CANopen I/O Module: 24 Digital Outputs

ZC-24DO CANopen I/O Module: 24 Digital Outputs Z-PC Line EN ZC-24DO CANopen I/O Module: 24 Digital Outputs Installation Manual Contents: - General Specifications - Technical Specifications - Installation Rules - Electrical connections - DIP-switches

More information

Manual. IP Sensor and Watchdog IPSW2210. I P S W 2 2 1 0 M a n u a l P a g e 1. Relay Output. Power input. 12VDC adapter LED Indicators. 2 Dry.

Manual. IP Sensor and Watchdog IPSW2210. I P S W 2 2 1 0 M a n u a l P a g e 1. Relay Output. Power input. 12VDC adapter LED Indicators. 2 Dry. IP Sensor and Watchdog IPSW2210 Manual Relay Output Power input 12VDC adapter LED Indicators 1 wire 2 Dry Output Green : Power Yellow: Link temperature & humidity contact inputs LED indicator sensor input

More information

=============================== WARNING

=============================== WARNING =============================== WARNING EXPLANATION OF GRAPHICAL SYMBOLS This symbol is intended to alert the user to the presence of unprotected dangerous voltage" within the product's enclosure that

More information

GSC/VRC IP Converter. Installation and Operation Manual

GSC/VRC IP Converter. Installation and Operation Manual GSC/VRC IP Converter Installation and Operation Manual Table of Contents Introduction... 2 Compatibility... 2 Remote Control Hardware... 2 PC Software... 2 Unpacking... 2 Front Panel Indicators... 3 Hardware

More information

CPU 317-2 PN/DP: Configuring an ET. 200S as PROFINET IO device SIMATIC. PROFINET CPU 317-2 PN/DP: Configuring an ET 200S as PROFINET IO device

CPU 317-2 PN/DP: Configuring an ET. 200S as PROFINET IO device SIMATIC. PROFINET CPU 317-2 PN/DP: Configuring an ET 200S as PROFINET IO device CPU 317-2 PN/DP: Configuring an ET 200S as PROFINET IO device SIMATIC PROFINET CPU 317-2 PN/DP: Configuring an ET 200S as PROFINET IO device Introduction 1 Preparation 2 Learning units 3 Further Information

More information

BIT COMMANDER. Serial RS232 / RS485 to Ethernet Converter

BIT COMMANDER. Serial RS232 / RS485 to Ethernet Converter BIT COMMANDER Serial RS232 / RS485 to Ethernet Converter (Part US2000A) Copyrights U.S. Converters 1 Contents Overview and Features... 3 Functions..5 TCP Server Mode... 5 Httpd Client Mode.5 TCP Auto mode....6

More information

xepi 2 Installation Guide Diagnostic Unit and Configuration Interface Doc. Version 4.0 English

xepi 2 Installation Guide Diagnostic Unit and Configuration Interface Doc. Version 4.0 English xepi 2 Diagnostic Unit and Configuration Interface Doc. Version 4.0 Installation Guide English Dear Customer, This "Installation Guide" will help you to install the hardware. If you have any further questions,

More information

Kvaser Mini PCI Express User s Guide

Kvaser Mini PCI Express User s Guide Kvaser Mini PCI Express User s Guide Copyright 2013-2014 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Printed Sunday 28 th September, 2014 We believe that the information contained herein was accurate

More information

1 INTRODUCTION. This document describes the procedure to upgrade LTMR.

1 INTRODUCTION. This document describes the procedure to upgrade LTMR. 1 INTRODUCTION This document describes the procedure to upgrade LTMR. Limitation: this package and procedure describe only the upgrade of the LTMR firmware for all network versions (Modbus, Profibus, DeviceNet,

More information

Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2

Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2 Type code Ident no. 1545065 Number of channels 2 Dimensions (W x L x H) 108 x 145 x 77.5 mm CoDeSys-programmable acc. to IEC 61131-3 Cable max. 50 m between interface and read/write head 10/100 Mbps Male

More information

PCS0100en 02.2008. Persy Control Services B.V. Netherlands

PCS0100en 02.2008. Persy Control Services B.V. Netherlands P-Bus Gateway PBGW2.128 Universal gateway between the P-bus protocol and open standard protocols. The variety of available electrical interfaces on the gateway offers a wide range of possibilities for

More information

TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL

TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL TCP/IP MODULE CA-ETHR-A INSTALLATION MANUAL w w w. c d v g r o u p. c o m CA-ETHR-A: TCP/IP Module Installation Manual Page Table of Contents Introduction...5 Hardware Components... 6 Technical Specifications...

More information

Universal Serial Bus (USB) to DH-485 Interface Converter

Universal Serial Bus (USB) to DH-485 Interface Converter Installation Instructions Universal Serial Bus (USB) to DH-485 Interface Converter Catalog Number 1747-UIC Contents Overview..................................................3 Computer and Operating System

More information

IntesisBox KNX Modbus TCP master

IntesisBox KNX Modbus TCP master IntesisBox KNX TCP master Gateway for integration of TCP slave devices into KNX control systems. Integrate any TCP slave device into KNX. KNX TCP slave EIB Bus IntesisBox Ethernet slave LinkBoxEIB Configuration

More information

Install the DeviceNet Module using the following procedure:

Install the DeviceNet Module using the following procedure: Installation INSTALLATION INSTRUCTIONS: MCD DEVICENET MODULE Order Code: 175G9002 1. Installation Install the DeviceNet Module using the following procedure: 1. Remove control power and mains supply from

More information

Application/Connection Examples

Application/Connection Examples This Quick Start Guide is designed to familiarize the user with the connection and configuration of the DTS-305 DIN rail mounted single / 3 phase power & energy meter with RS-485 or TCP communications.

More information

Smile 11 AS-i Emergency stop with safe AS-i input node

Smile 11 AS-i Emergency stop with safe AS-i input node Original instructions Smile 11 AS-i Emergency stop with safe AS-i input node SAFETY AT WORK ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand

More information

ModBus Server - KNX. Gateway for integration of KNX equipment into Modbus (RTU and TCP) control systems.

ModBus Server - KNX. Gateway for integration of KNX equipment into Modbus (RTU and TCP) control systems. IntesisBox ModBus Server - KNX Gateway for integration of KNX equipment into Modbus (RTU and TCP) control systems. Integrate KNX based lighting control into your SCADA, BMS, PLC "talking" Modbus. Master

More information

HDTV Anywhere USER MANUAL 3. 20672/ 20140710 HDTV Anywhere ALL RIGHTS RESERVED MARMITEK

HDTV Anywhere USER MANUAL 3. 20672/ 20140710 HDTV Anywhere ALL RIGHTS RESERVED MARMITEK HDTV Anywhere USER MANUAL 3 20672/ 20140710 HDTV Anywhere ALL RIGHTS RESERVED MARMITEK 2 MARMITEK SAFETY WARNINGS To prevent short circuits, this product should only be used inside and only in dry spaces.

More information

2012 uptimedevices.com

2012 uptimedevices.com 2012 uptimedevices.com Contents Product Overview...3 Installation...4 Web Interface Orientation...5 Web Interface (Login Screen)...6 Summary Screen...7 Sensors Screen...8 Sensor Names...9 Graph...10 Alerts

More information

User Manual. EtherUSB

User Manual. EtherUSB User Manual EtherUSB USB Ethernet Access Point for PDA V 2.0 Clarinet Systems, Inc. Clarinet Systems, Inc. http://www.clarinetsys.com Page 1 Publication Revision No. Control Table Rev. No. Date Contents

More information

Expert Power Control NET 4x 8212 / 8213

Expert Power Control NET 4x 8212 / 8213 2010 Gude Analog- und Digitalsysteme GmbH 2010 Gude Analog- und Digitalsysteme GmbH 23.08.2010 Content 3 Table of content Kapitel 1 Security Advise 5 Kapitel 2 Description 5 Kapitel 3 Hardware 6 3.1 Content

More information

Setup Manual and Programming Reference. RGA Ethernet Adapter. Stanford Research Systems. Revision 1.05 (11/2010)

Setup Manual and Programming Reference. RGA Ethernet Adapter. Stanford Research Systems. Revision 1.05 (11/2010) Setup Manual and Programming Reference Stanford Research Systems Revision 1.05 (11/2010) Certification Stanford Research Systems certifies that this product met its published specifications at the time

More information

User Guide. HDMI Active Cable Extender. DVI-7370c

User Guide. HDMI Active Cable Extender. DVI-7370c User Guide HDMI Active Cable Extender DVI-7370c TABLE OF CONTENTS SECTION PAGE PRODUCT SAFETY...1 PRODUCT LIABILITY...1 1.0 INTRODUCTION...2 2.0 SPECIFICATIONS...3 3.0 PACKAGE CONTENTS...4 4.0 CONNECTING

More information

1 Application Description... 3. 1.1 Objective... 3 1.2 Goals... 3

1 Application Description... 3. 1.1 Objective... 3 1.2 Goals... 3 Contents Moxa Technical Support Team support@moxa.com 1 Application Description... 3 1.1 Objective... 3 1.2 Goals... 3 2 System Topology... 3 3 Hardware and Software Requirements... 4 4 Configuration...

More information

Xbox LIVE Vision. english

Xbox LIVE Vision. english Xbox LIVE Vision Thanks for choosing the Xbox LIVE Vision camera. Xbox LIVE Vision adds video to your Xbox 360 system and games, including: Video chat and picture messages. Photo snapshots. Family Settings

More information

PT500 500Mbps Powerline Adapter. User Guide

PT500 500Mbps Powerline Adapter. User Guide PT500 500Mbps Powerline Adapter User Guide PT500 500Mbps Powerline Adapter V100R001 User Guide 202593_04 Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service.

More information

PLCM-T1 / PLCM-T2 Torch height controller

PLCM-T1 / PLCM-T2 Torch height controller www.purelogic.ru Operating guide СОДЕРЖАНИЕ: 1. General information... 2 2. Scope of delivery... 3 3. Specifications... 3 4. The differences between T1 and T2... 4 5. Principle of operation... 6 6. Wiring

More information

Network Interface Panel User s Guide NPD4747-01 EN

Network Interface Panel User s Guide NPD4747-01 EN User s Guide NPD4747-01 EN Contents Contents Copyright and Trademarks Safety Instructions Important Safety Instructions... 4 Cautions and Notes... 4 Getting to Know Your Network Interface Panel Package

More information

Schneider OS-Loader usage via Ethernet or USB.

Schneider OS-Loader usage via Ethernet or USB. LHC Gas Systems 28 th February, 2007 Schneider OS-Loader usage via Ethernet or USB. Jacques ROCHEZ - IT/CO/FE Abstract This document is a guideline on how to configure correctly a PC for the use of the

More information

OPTICAL FIBER repeaters/ isolators

OPTICAL FIBER repeaters/ isolators OPTICAL FIBER repeaters/ isolators FUNCTINALITY AND RELIABILITY' Optical Fiber converters give the possibilità to extend on Optical Fiber (also at the same time) every type of network/bus (LAN/Ethernet,

More information

Modular I/O System Analog and Digital Interface Modules

Modular I/O System Analog and Digital Interface Modules OPERATING INSTRUCTIONS Modular I/O System Analog and Digital Interface Modules Installation Operation Maintenance Document Information Document ID Title: Operating Instructions Modular I/O System Part

More information

User Manual. EtherUSB

User Manual. EtherUSB User Manual EtherUSB USB Ethernet Access Point for PDA V 1.6 Page 1 Publication Revision No. Control Table Rev. No. Date Contents 1.6 8/22/07 Support connection of multiple WM5.0 devices 1.5 6/18/07 Support

More information

BACnet Automation Interface Module (Network Version)

BACnet Automation Interface Module (Network Version) Sense +V Tx Rx LAN LINK Over ARCNET KBaud BACnet Rx BACnet Tx Archive Valid Port S Tx Port S Rx Low Battery Network- Enhanced Access Default MSTP PTP = Download Required on Rnet and Port S IP Address IP

More information

KNX IP Gateway. Light-Control R. User manual-ver.1 LC-IPGW-001. KNX Gateway. KNX/EIB Intelligent Installation Systems

KNX IP Gateway. Light-Control R. User manual-ver.1 LC-IPGW-001. KNX Gateway. KNX/EIB Intelligent Installation Systems KNX Gateway Light-Control R User manual-ver.1 LC-IPGW-001 Intelligent Installation Systems Contents 1. Summary ---------------------------------------------------------------------------------------------------------------------

More information

USER MANUAL. VS-81H 8x1 HDMI Switcher MODEL: P/N: 2900-000670 Rev 4

USER MANUAL. VS-81H 8x1 HDMI Switcher MODEL: P/N: 2900-000670 Rev 4 KRAMER ELECTRONICS LTD. USER MANUAL MODEL: VS-81H 8x1 HDMI Switcher P/N: 2900-000670 Rev 4 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions 3

More information

CPB. Doc. N MO-0279-ING MODBUS/PROFIBUS DP CONVERTER TYPE CPB. Microener - Copyright 2010 Date 20.12.2004 Rev. 0

CPB. Doc. N MO-0279-ING MODBUS/PROFIBUS DP CONVERTER TYPE CPB. Microener - Copyright 2010 Date 20.12.2004 Rev. 0 MODBUS/PROFIBUS DP CONVERTER TYPE CPB Microener - Copyright 2010 Date 20.12.2004 Rev. 0 INDEX 1. GENERAL 3 2. CPB SET 4 3. INSTALLATION 4 3.1 - CPB CONVERTER ASSEMBLING 4 3.2 - PROFIBUS TERMINAL DESCRIPTION.

More information

EZ-View Network Communications Guide www.cszindustrial.com

EZ-View Network Communications Guide www.cszindustrial.com Network Communications Guide EzView Network Communications Guide RevB July 2013 (V2.2) Supersedes: RevA (May 2011) Cincinnati Sub-Zero Products, LLC 513-772-8810 12011 Mosteller Road Cincinnati, Ohio 45241

More information

PixelController II Art-Net controller for LED pixels

PixelController II Art-Net controller for LED pixels Art-Net node for drive digital RGB pixels and LED strips with SPI drivers APA102,INK1002, INK1003, LX1003 TM1803, TM1809, TM1812, UCS3903 WS2811, WS2812, WS1812B UCS1903, UCS1903B, UCS1909, UCS1912, UCS2903

More information

M-series Virtual I/O Module 2

M-series Virtual I/O Module 2 DeltaV Distributed Control System Product Data Sheet M-series Virtual I/O Module 2 Non-intrusive DeltaV I/O simulation Powerful integration solution Easy to use Modular, flexible packaging The M-series

More information

SLC 5/05 Processors Firmware/Operating System ControlFLASH Upgrade

SLC 5/05 Processors Firmware/Operating System ControlFLASH Upgrade Installation Instructions SLC 5/05 Processors Firmware/Operating System ControlFLASH Upgrade Catalog Numbers 1747-DU501 Topic Page System Requirements 3 Install ControlFLASH 3 Prior to Running ControlFLASH

More information

SNMP Web Management. User s Manual For SNMP Web Card/Box

SNMP Web Management. User s Manual For SNMP Web Card/Box SNMP Web Management User s Manual For SNMP Web Card/Box Management Software for Off-Grid Inverter Version: 1.2 Table of Contents 1. Overview... 1 1.1 Introduction... 1 1.2 Features... 1 1.3 Overlook...

More information

APPLICATION NOTE. Ethernet Configuration Guide for D-500 D-700

APPLICATION NOTE. Ethernet Configuration Guide for D-500 D-700 Tel: +90-216 466 84 60 Fax: +90-216 364 65 65 datakom@datakom.com.tr http://www.datakom.com.tr APPLICATION NOTE Ethernet Configuration Guide for D-500 D-700 PRODUCTS AFFECTED: D-500 / D-700 WRITTEN BY:

More information

Users manual. TCW181B-CM_R1 Page 1

Users manual. TCW181B-CM_R1 Page 1 Ethernet controller TCW181B-CM Users manual 1. Short description TCW181B-CM is 8-channel Ethernet relay board, which is designed to work in IP-based networks and managed by WEB interface or SNMP programs.

More information

Industrial 1 Port RS232/422/485 to Dual Ethernet Serial Device Server

Industrial 1 Port RS232/422/485 to Dual Ethernet Serial Device Server Industrial 1 Port RS232/422/485 to Dual Ethernet Serial Device Server NETRS232485 *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com

More information

User Manual. Protocol Converter PC-E, Serial to Ethernet (RS232/485 Modbus RTU to Modbus TCP/IP)

User Manual. Protocol Converter PC-E, Serial to Ethernet (RS232/485 Modbus RTU to Modbus TCP/IP) User Manual Protocol Converter PC-E, Serial to Ethernet (RS232/485 Modbus RTU to Modbus TCP/IP) UMPCEA Rev 1.0, 05/2007 COPYRIGHT NOTICE This manual is a publication of Brainchild Electronics Co... Ltd.

More information

CNC File Transfer Box. Connecting the CNC File Transfer. CNC Transfer Program

CNC File Transfer Box. Connecting the CNC File Transfer. CNC Transfer Program CNC File Transfer Box The CNC File Transfer connects a serial CNC device to the network so files can be easily transferred from a computer to the CNC equipment. Any computer on the network can transfer

More information

AXIS T81B22 DC 30W Midspan

AXIS T81B22 DC 30W Midspan INSTALLATION GUIDE AXIS T81B22 DC 30W Midspan ENGLISH About this Document This document includes instructions for installing AXIS T81B22 on your network. Previous experience of networking will be beneficial

More information

MADRIX NEO Quick Start Guide & User Manual

MADRIX NEO Quick Start Guide & User Manual MADRIX NEO Quick Start Guide & User Manual 4 th Edition, Last Update: March 2011 Thank You for Purchasing MADRIX NEO Please read this manual carefully and thoroughly before using the MADRIX NEO. Make sure

More information

FOR MORE INFORMATION. 125 8880 or from a non-telstra phone 13 2200 and say pre-paid telstra.com/ppmbb visit a telstra store or partner

FOR MORE INFORMATION. 125 8880 or from a non-telstra phone 13 2200 and say pre-paid telstra.com/ppmbb visit a telstra store or partner FOR MORE INFORMATION 125 8880 or from a non-telstra phone 13 2200 and say pre-paid telstra.com/ppmbb visit a telstra store or partner getting to know your telstra pre-paid 4G WI-FI (760S) LET S GET THIS

More information

User s Manual Before using the inverter, you need to read and save the safety instructions.

User s Manual Before using the inverter, you need to read and save the safety instructions. User s Manual Before using the inverter, you need to read and save the safety instructions. STI SERIES (STI200, STI300, STI500, STI700, STI1000) Power Frequency Pure Sine Wave Inverter The information

More information

Using the AnyBus -X Gateway to Communicate between a DVT camera and a Profibus Master

Using the AnyBus -X Gateway to Communicate between a DVT camera and a Profibus Master Using the AnyBus -X Gateway to Communicate between a DVT camera and a Profibus Master Page 1 of 13 Table of Contents 1 OVERVIEW... 3 2 INSTALLING AND CONFIGURING THE ANYBUS -X GENERIC GATEWAY AND ETHERNET

More information

CAN@net II Intelligent PC/CAN Interface. Manual

CAN@net II Intelligent PC/CAN Interface. Manual CAN@net II Intelligent PC/CAN Interface Manual IXXAT Automation GmbH Leibnizstr. 15 D-88250 Weingarten Tel.: +49 (0)7 51 / 5 61 46-0 Fax: +49 (0)7 51 / 5 61 46-29 Internet: www.ixxat.de e-mail: info@ixxat.de

More information

User Manual. Air-conditioner Controller SB-DN-HVAC (MAC01.331) www.hdlautomation.com

User Manual. Air-conditioner Controller SB-DN-HVAC (MAC01.331) www.hdlautomation.com Air-conditioner Controller SB-DN-HVAC (MAC01.331) www.hdlautomation.com Document updates: Version Data Description V1.0 2015.05.25 Finish new document HVAC Controller User Manual INDEX 1. Overview...1

More information

Special Note Ethernet Connection Problems and Handling Methods (CS203 / CS468 / CS469)

Special Note Ethernet Connection Problems and Handling Methods (CS203 / CS468 / CS469) Special Note Connection Problems and Handling Methods (CS203 / CS468 / CS469) Sometimes user cannot find the RFID device after installing the CSL Demo App and the RFID reader is connected. If user cannot

More information

alpha DSL WTM HS Instructions for use ADSL modem alpha DSL WTM HS

alpha DSL WTM HS Instructions for use ADSL modem alpha DSL WTM HS alpha DSL WTM HS Instructions for use ADSL modem alpha DSL WTM HS Safety precautions Safety precautions The DSL modem alpha DSL WTM HS complies with the European norm EN60950 safety of information technology

More information

About This Guide SolarEdge Configuration Tool Software Guide. About This Guide

About This Guide SolarEdge Configuration Tool Software Guide. About This Guide About This Guide 3 About This Guide This user guide is intended for Photovoltaic (PV) system owners, installers, technicians, maintainers, administrators and integrators who are authorized to configure

More information

Broadband Router ESG-103. User s Guide

Broadband Router ESG-103. User s Guide Broadband Router ESG-103 User s Guide FCC Warning This equipment has been tested and found to comply with the limits for Class A & Class B digital device, pursuant to Part 15 of the FCC rules. These limits

More information

HWg-STE HWg-STE PoE MANUAL

HWg-STE HWg-STE PoE MANUAL HWg-STE HWg-STE PoE MANUAL www.hw-group.com Page 2 HWg-STE connectors LED indicators Green: Power & Mode Yellow: Link & Activity SENSORS S1 and S2 ports for connecting temperature or humidity sensors.

More information

GPS NTP Time Server for Intranet Networks DIN RAIL Version

GPS NTP Time Server for Intranet Networks DIN RAIL Version GPS NTP Time Server for Intranet Networks DIN RAIL Version Description: GPS NTP time server is very simple low cost solution for Ethernet / Intranet time synchronization. Each computer or devices with

More information

EIB/KNX IP Interface with Power over Ethernet (PoE)

EIB/KNX IP Interface with Power over Ethernet (PoE) EIB/KNX IP Interface with Power over Ethernet (PoE) IP Interface between LAN and EIB/KNX bus (Quelle: EIBMARKT GmbH, Reference No.: N000401) Page 1 Application area The KNXnet/IP-Interface is used to connect

More information

AW-HE60 Firmware Upgrade Procedure

AW-HE60 Firmware Upgrade Procedure AW-HE60 Firmware Upgrade Procedure Please be sure to read this first. AW-HE60 Upgrade Procedure February 2015 The update of AW-HE60 camera is performed via a network from Web setting screen on

More information

L5354 ControlNet Communications Interface

L5354 ControlNet Communications Interface L5354 ControlNet Communications Interface Technical Manual HA470733 Issue 2 Copyright SSD Drives Inc 2005 All rights strictly reserved. No part of this document may be stored in a retrieval system, or

More information

GETTING TO KNOW YOUR 4G USB

GETTING TO KNOW YOUR 4G USB GETTING TO KNOW YOUR Telstra Pre-paid 4G USB LET S GET THIS SHOW ON THE ROAD WHAT S INSIDE Your Telstra Pre-Paid 4G USB has been tested to the highest standards to deliver you the best possible coverage

More information

KNX Panasonic Air Conditioners

KNX Panasonic Air Conditioners IntesisBox KNX Panasonic Air Conditioners Gateway for Panasonic ECOi and PACi system integration into KNX networks Up to 30 Outdoor units Up to 64 Indoor units PA-AC-KNX-64/128 EIA485 U1U2 line U1U2 line

More information

SolarEdge. RS485 Expansion Kit Installation Guide. Version 1.0

SolarEdge. RS485 Expansion Kit Installation Guide. Version 1.0 SolarEdge RS485 Expansion Kit Installation Guide Version 1.0 Disclaimers Disclaimers Important Notice Copyright SolarEdge Inc. All rights reserved. No part of this document may be reproduced, stored in

More information

Application & Quick-Start Guide

Application & Quick-Start Guide Model: CRMWIC Web Intelligent Controller 1 This document will illustrate various ways to connect and use a CRM-WIC as well as programming examples. When connecting CRM-WIC, the installer has several interface

More information

Introduction. New manuals are written like a slide show This approach is to have more diagrams and images to improve learning.

Introduction. New manuals are written like a slide show This approach is to have more diagrams and images to improve learning. Introduction New manuals are written like a slide show This approach is to have more diagrams and images to improve learning. We can adapt each slide to keep updated the document. It is very easy and fast.

More information

IDDERO HOME SERVER. Quick start guide. www.iddero.com 150302-02

IDDERO HOME SERVER. Quick start guide. www.iddero.com 150302-02 IDDERO HOME SERVER Quick start guide www.iddero.com 150302-02 TABLE OF CONTENTS 1 INTRODUCTION... 3 2 IDDERO CONFIGURATION SOFTWARE... 3 2.1 Installation and First Steps...3 3 IDDERO HOME SERVER CONFIGURATION...

More information