Test Material Standard
|
|
|
- Lee Willis
- 7 years ago
- Views:
Transcription
1 Compressive strength of AAC (EN 679) Dry density of AAC (EN 678) Test Material Standard Drying shrinkage of AAC (EN 680) Acid soluble sulfates (EN ) Alkali Reactivity of Aggregate (Mortar-Bar ASTM C227) Crushed and broken surfaces (EN 933-5) Drying shrinkage (EN ) AAC AAC AAC EN 679 Determination of the compressive strength of autoclaved aerated concrete EN 678 Determination of the dry density of autoclaved aerated concrete EN 680 Determination of the drying shrinkage of autoclaves aerated concrete ASTM C227 Standard Test Method for Potential Alkali Reactivity of -Aggregate Combinations (Mortar-Bar Method) EN 933 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles EN Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage Fine Grains <0,5mm (EN ) EN for railway ballast Flakiness index (EN 933-3) EN 933 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index Friable Particles (ASTM C142) Humus content (NaOH, EN ) Lightweight contaminators (EN ) LOI 975±25 C, 1h (EN cl.17) Loose bulk density and voids (EN ) Los Angeles (ASTM C131) ASTM C142/C142M Standard Test Method for Clay Lumps and Friable Particles in EN : Tests for mechanical and physical properties of aggregates. Determination of loose bulk density and voids ASTM C131 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine Los Angeles (EN ) Magnesium sulfate test (EN ) Methylene Blue (EN 933-9) EN Tests for mechanical and physical properties of aggregates. Methods for the determination of resistance to fragmentation EN : Tests for thermal and weathering properties of aggregates. EN Tests for geometrical properties of aggregates. Assessment of fines. Methylene blue test HERACLES General Company
2 Organic contaminators by mortar method (EN ) Organic Impurities (ASTM C40) Particle density and water absorption (EN ) Particle size distribution Fines <75µm (ASTM C117) Particle size distribution Sieving (ASTM C136) Particle size distribution Sieving (EN 933-1) Potential Alkali-Silica Reactivity (Chemical Method ASTM C289) Resistance to thermal shock (EN ) Sand equivalent (EN 933-8) Shape index (EN 933-4) Shell content (EN 933-7) Sonnenbrand test (EN ) Soundness (ASTM C88) Specific Gravity & Absorption (ASTM C127, C128) Total sulfur content (EN ) ASTM C40/C40M Standard Test Method for Organic Impurities in Fine for EN Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption ASTM C117 Standard Test Method for Materials Finer than 75 µm (No. 200) Sieve in Mineral by Washing ASTM C136 Standard Test Method for Sieve Analysis of Fine and Coarse EN Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method ASTM C289 Standard Test Method for Potential Alkali-Silica Reactivity of (Chemical Method) EN : Tests for thermal and weathering properties of aggregates EN Tests for geometrical properties of aggregates. Assessment of fines. Sand equivalent test EN 933 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index EN Tests for geometrical properties of aggregates - Part7: Determination of shell content - Percentage of shell in coarse aggregates EN Tests for thermal and weathering properties of aggregates. Boiling test for Sonnenbrand basalt ASTM C88 Standard Test Method for Soundness of by Use of Sodium Sulfate or Magnesium Sulfate ASTM C127 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate ASTM C128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate Water content (moisture) (EN ) EN Tests for mechanical and physical properties of aggregates. Determination of the water content by drying in a ventilated oven HERACLES General Company
3 Water solubility (EN ) Water soluble Cl (EN ) Water soluble sulfates (EN ) Water suction height (EN ) Granulometry - sieving (90 µm to 50 mm) Bulk Density of Aggregate (ASTM C29),, Raw materials EN : Tests for mechanical and physical properties of aggregates. Determination of water suction height In house ASTM C29/C29M - 09 Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate Parent rock strength (ELOT 408), Rocks National std ELOT 408 Simplified petrographic description (EN 932-3), Rocks EN Tests for general properties of aggregates Available CaO (EN ) Building lime EN Building lime - Part 2: Test methods Bulk Density (EN 459-2, 6.3) Building lime EN Building lime - Part 2: Test methods Flow and Penetration values (EN ) Building lime EN Building lime - Part 2: Test methods LOI 1050±25 C, 2h (EN ) Building lime EN Building lime - Part 2: Test methods Particle size dry sieving (EN ) Building lime EN Building lime - Part 2: Test methods Reactivity (EN ) Building lime EN Building lime - Part 2: Test methods Soundness (EN ) Building lime EN Building lime - Part 2: Test methods Yield (EN ) Building lime EN Building lime - Part 2: Test methods Air Content (ASTM C185) Air content pressure method (EN 413-2) Autoclave expancion (ASTM C151/C151M) ASTM C185 Standard Test Method for Air Content of Hydraulic Mortar EN Masonry cement. Part 2: Test methods ASTM C151/C151M Standrad Test Method for Autoclave Expansion of Hydraulic Chemical analysis - main oxides (XRF EN ) EN Methods of Testing - Part 2 : Chemical analysis of cement Section 2: Analysis by x-ray fluorescence Chemical analysis of cement wet method (EN 196-2) EN Methods of testing cement Part 2: Chemical analysis of cement Chloride content (EN196-2) EN196-2 Chemical analysis of cement Color of cement Colorimeter Compressive Strength (ASTM C109) ASTM C109/C109M Standard Test Method for Compressive Strength of Hydraulic (Using 2 in. or [50 mm] Cube Specimens) HERACLES General Company
4 Compressive strength (EN 196-1) Constituents (ΕΝ196-4) Cr(VI) content (EN ) Expansion in Water (ASTM C1038) False set (ASTM C451) Heat of hydration - De Langavant (EN 196-9) Insoluble residue (EN196-2) ΕΝ196-2 Insoluble residue (ASTM C114) EN Methods of testing cement - Part 1: Determination of strength EN Methods of Testing - Quantitative Determination of Constituents EN : Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement ASTM C1038/C1038M Standard Test Method for Expansion of Hydraulic Mortar Bars Stored in Water ASTM C451 Early stiffening of hydraulic cement (paste method) EN Methods of testing cement - Part 9: Heat of hydration - Semi-adiabatic method ASTM C114 Standard Test Method for Chemical analysis of Hydraulic Liftomat (Lafarge cement workability) Lafarge Pozzolanicity (EN 196-5) EN Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement Retrait et gonflement Rio test (sulfates reactivity) Lafarge Self life - Water soluble Cr(VI) content (EN ) Setting by Vicat Needle (ASTM C191) NF P ; Méthodes d'essai des ciments Détermination du retrait et du gonflement EN 196 Methods of testing cement - Part 10: Determination of the watersoluble chromium (VI) content of cement ASTM C191 Standard Test Methods for Time of Setting of Hydraulic by Vicat Needle Setting time - Gillmore (ASTM C266) ASTM C266 Standard Test Method for Time of Setting of Hydraulic Paste by Gillmore Needles SO3 content (EN196-2) EN196-2: Chemical analysis of cement Soundness Le Chatelier (EN 196-3) EN 196-3: Determination of setting time and soudness Standard consistence and Setting EN 196-3: Determination of setting times and time (EN196-3) soundness Standard consistence water (EN196- EN 196-3: Determination of setting times and 3) soundness Sulphate resistance (s with NO pozzs and slags ASTM C452 ) Sulphate resistance (s with pozzs and slags ASTM C1012) Wadepool test Lafarge Insoluble residue (EDTA, HNO3), itious ASTM C452/C452M Standard Test Method for Potential Expansion of Portland Exposed to Sulfate ASTM C1012/C1012M Standard Test Method for Length Change of Hydraulic Exposed to a Sulfate Solution EN Methods of Testing - Quantitative Determination of Constituents HERACLES General Company
5 Water soluble alkalies (ASTM C ) Flexural Strength Alpine Fineness Blaine Specific Surface (EN 196-6) LOI 950±25οC (EN 196-2) R 90 µm (EN 196-6) R45 Alpine Wet sieving R45 (ASTM C430) Total Alkalies (wet analysis EN 196-2) Absolute Density (ASTM C188) Available alkalies (ASTM C311), clinker,,,,,,,, Raw materials, Solids itious ASTM C114 Standard Test Method for Chemical analysis of Hydraulic in house Lafrage, in house EN196-6: Determination of fineness by residue R90 or air permeability EN Methods of testing cement Part 2: Chemical analysis of cement EN196-6: Determination of fineness by residue R90 or air permeability Lafrage, in house ASTM C430 Standard Test Method for Fineness of Hydraulic by the 45 µm (No. 325) Sieve EN Methods of testing cement Part 2: Chemical analysis of cement ASTM C188 Standard Test Method for Density of Hydraulic ASTM C311-11b: Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland Chapelle test itious Lafarge Fly ash: 28d Compressive Strength itious in house Le Chatelier soundness 70/30 mix. itious in house based on EN Pozzolana reactivity National std 244/80 itious National std 244/80 Reactive SiO2 (EN 197-1) Reactivity 70/30 ( d) Reactivity 80/20 ( d) Reactivity Index (ASTM C 595) itious itious itious itious Optimum Sulphate Content s in house Tußchenbröck (false set) s Lafarge Total Sulfur (wet analysis) Dry Residue (ASTM C494) s, Raw materials Chemical admixtures Clinker Grinding Clinker in house EN Composition, specifications and conformity criteria for common cements based on Table 3 and Annex A1 of ASTM C595 Standard Specification for Blended Hydraulic s based on sections of ASTM C311 Standard and Testing Fly Ash and Natural Pozzolanas for Use in Portland ASTM C595 / C595M - 12e1 Standard Specification for Blended Hydraulic s in house wet analysis ASTM C 494: Standard Specification for Chemical Admixtures for HERACLES General Company
6 Clinker Microscopy Clinker ASTM C1356 Standard Test Method for Quantitative Determination of Phases in Portland Clinker by Microscopical Point-Count Procedure Clinker reactivity (Lafarge) Clinker Lafarge Free CaO (LQTS Lafarge) Clinker LQTS Lafarge BS 4550/2 Optical microscopy and ONO Clinker in house Salicylic Acid Extraction (S.A.E.) Clinker Salicylic Acid Extraction (S.A.E.) Soluble Fe(II) Clinker in house K2Cr2O7 Total FeO Clinker National std 244/80 Water soluble alkalies clinker-cement (Lafarge) Clinker Lafarge F content Clinker, in house, selective electrode BB10 Grindability Clinker, Raw materials Lafarge Bond Grindability Clinker, Raw materials Standard Bond Grindability Test Air permeability Torrent Apparent Chloride Diffusion Coefficient (ASTM C1556) Carbonation depth RILEM CPC-18 Compressive strength of concrete (EN ) ASTM C1556 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of itious Mixtures by Bulk Diffusion EN Testing hardened concrete - Part 3: Compressive strength of test specimens mix design National std '97, EN 206 Slump and Slump loss National std '97, EN 206 Density, Absorption, and Voids in Hardened (ASTM C642) Flexural Strength of concrete (ASTM C78) ASTM C642 Standard Test Method for Density, Absorption, and Voids in Hardened ASTM C78/C78M Standard Test Method for Flexural Strength of (Using Simple Beam with Third Point Loading) K-Slump (ASTM C1362) ASTM C1362 Flow of Freshly Mixed Mixing Water Compliance (ELOT 345) National std ELOT 345 Mixing Water Compliance (EN 1008) EN 1008 Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete Nail pull off in house Petrographic Examination of ASTM C856-0(4) Std practice for P/Exam of Hardened hardened conc ASTM C876 Standard Test Method for Corrosion Rebar corrosion potential (ASTM Potentials of Uncoated Reinforcing Steel in C876) Rebound hammer (Schmidt hammer) Schmidt hammer HERACLES General Company
7 Strength of concrete cores National stds Tensile splitting test (Brazilian EN 12362) Ultrasound velocity in house Cl penetration (ASTM C1202) Determination of the carbonation resistance of concrete: Accelerated carbonation method Length change of hardened mortar or concrete Static Modulus of Elasticity (ASTM C469) Water penetration (EN ),,,,, EN Testing concrete Tensile splitting test of test srecimens ASTM C Standard Test Method for Electrical Indication of 's Ability to Resist Chloride Ion Penetration CEN TC51 N 979: 2009 draft Core drilling, Rocks in house Chromium reduction capacity Cr(VI) reduction in house agents Reactivity of Cr(VI) reduction agents Cr(VI) reduction in house agents Chemical analysis (clinkerizationdissolution) General in house Chemical analysis of main oxides (CaO, SiO2, Al2O3, Fe2O3, MgO, K2O, Na2O, TiO2, SrO, P2O5, Mn2O3, General XRF (as EN ) ZnO, Cr2O3) Density of liquids General in house ASTM C157/C157M Standard Test Method for Length Change of Hardened Hydraulic Mortar and ASTM C469/C469M - 10 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of in Compression EN Testing hardened concrete Part-8: Depth of penetration of water under pressure DTA/TG - DSC General Thermal analysis (Setaram) Grindability General in house Heavy and trace metals (As; Cd; Co; Cr; Cu; Mn; Ni; Pb; Sb; Sn; Tl; V; Zn) General AAS Hg determination General specific AAS Karl Fischer - Water content General in house LOI 1400 C General in house LOI 500 C, LOI 1000 C General in house Mercury Porosimetry General Moisture General C ph General in house, Quantitative X-ray Diffraction Phase Analysis (QXRDPA - XRD/Rietveld) General ASTM C1365 Standard Test Method for Determination of the Proportion of Phases in Portland and Portland- Clinker Using X-Ray Powder Diffraction Analysis HERACLES General Company
8 X-Ray diffraction (XRD) General EN , EN Gypsum purity: SO3, cryst. water (ASTM C471) Viscosity of liquids (Brookfield) Resistance to disintegration (EN annex B) Freezing and thawing (EN ann.c, EN ann. B) Resistance to fragmentation/crushing (EN ann. A) Consistence with plunger masonry cem. (EN 413-2) Flow masonry cem. (EN 413-2) Setting time masonry cem. (EN 413-2) Water retention (EN 413-2) Calculation of thermal transmittance (EN 1745) Compressive strength (EN 772-1) Dimensions (EN ) Net and gross dry density (EN ) Gypsum Liquids, Suspensions LW Aggegates LW LW Masonry cement Masonry cement Masonry cement Masonry cement Masonry units Masonry units Masonry units Masonry units ASTM C471M - 01(2012): Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric) Brookfield viscometr EN Lightweight aggregates for concrete mortar and grout EN ann. C, EN ann. B EN Lightweight aggregates for concrete, mortar, grout, bituminous mixtures, surface treatments and for unbound and bound applications EN 413-2: Masonry cement. Part 2: Test methods EN 413-2: Masonry cement. Part 2: Test methods EN Masonry cement. Part 2: Test methods EN 413-2: Masonry cement. Part 2: Test methods EN 1745 Masonry and masonry products - Methods for determining deign thermal values EN 772 Methods of test for masonry units - Part 1: Determination of compressive strength EN Methods of test for masonry units. Determination of dimensions EN Methods of test for masonry units. Determination of net and gross dry density of masonry units (except for natural stone) Water absorption (EN ) Masonry units EN Methods of test for masonry units. Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay Microconcrete Setting Time Microconcrete Lafarge Microconcrete Strength Microconcrete Lafarge Microconcrete synthesis Microconcrete Lafarge Microconcrete workability Microconcrete Lafarge Adhesive strength of hardened mortars on substrates (EN ) Air content of fresh mortar (EN ) EN Methods of test for mortar for masonry. Determination of adhesive strength of hardened rendering and plastering mortars on substrates EN Methods of test for mortar for masonry. Determination of air content of fresh mortar HERACLES General Company
9 Bulk density of hardened mortar (EN ) Consistence by flow (EN ) Consistence by plunger (EN ) Flexural and compressive strength (EN ) Water retentivity (EN ) Workable life and correction time (EN ) Compressive strengths (ISO API) Oil Well EN Methods of test for mortar for masonry. Determination of dry bulk density of hardened mortar EN Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by flow table) EN Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by plunger penetration) EN Methods of test for mortar for masonry. Determination of flexural and compressive strength of hardened mortar EN Methods of test for mortar for masonry. Determination of water retentivity of fresh mortar EN 1015 Methods of test for mortar for masonry. ISO Petroleum and natural gas industries -- s and materials for well cementing -- Part 1: Specification CILAS - Laser particle size distribution in house, Laser diffraction CaF2 determination Raw materials in house Free silica determination Raw materials in house HCl, NaOH, HF Respirable silica (XRD) Raw materials XRD Total organic carbon Raw materials in house, CHN Coarse quartz grains - Q +45µm (FLS) Raw mix FLS Coarse quartz grains - Q +63µm (Lafarge) Raw mix Lafarge FLS Burnability Raw mix in house K1450 Burnability Raw mix Lafarge Musikas burnability Raw mix Musikas CO2 Determination (EN ) Raw mix,, Lime Apparent density/porosity PRE/R9 Refractories PRE/R9 Refractories' corrosion study Refractories in house Atterberg Limits (ASTM D3348, AASHTO T89 & T90) ph soils Soils Soils EN Methods of testing cement Part 2: Chemical analysis of cement AASHTO T89 Determining the Liquid Limit of Soils, AASHTO T90 Determining the Plastic Limit and Plasticity Index of Soils EN Soil improvers and growing media - Determination of ph, ISO Soil quality - Determination of ph Air Dry Loss (40 C) Solid fuels in house Ash content (ISO 1171) Solid fuels ISO 1171 Solid mineral fuels Determination of ash Ash heavy and trace metals Solid fuels in house AAS Ash preparation and chemical analysis Solid fuels in house XRF HERACLES General Company
10 C, H, N content (ISO 12902) Solid fuels ISO/TS Solid Mineral Fuels - Determinatioon of total carbon hydrogen and nitrogen - Instrumental methods Cl content (ASTM D2361) Solid fuels ASTM D2361 Fusibility of coal ash (ASTM D1857/D1857M) Hard Groove Index (HGI) Moisture content (ISO 589, ISO 687) Volatiles (ISO 562) Gross and Net Calorific Value (ISO 1928) Leaching test (EN 12457) Solid fuels Solid fuels Solid fuels Solid fuels Solid fuels, Heavy gas oil Wastes ASTM D1857/D1857M Standard Test Method for Fusibility of Coal and Coke Ash ISO 589 Hard coal - Determination of Total Moisture, ISO 687 Solid mineral fuels - Coke - Determination of moisture in the general analysis test sample ISO 562 Hard coal and coke Determination of volatile matter ISO 1928 Solid mineral fuels -- Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value EN Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Parts 1-4 HERACLES General Company
1.5 Concrete (Part I)
1.5 Concrete (Part I) This section covers the following topics. Constituents of Concrete Properties of Hardened Concrete (Part I) 1.5.1 Constituents of Concrete Introduction Concrete is a composite material
Tests on Portland Cement
Tests on Portland Cement Dr. Kimberly Kurtis School of Civil Engineering Georgia Institute of Technology Atlanta, Georgia Composition Chemical Name Tricalcium silicate Chemical Formula 3CaO SiO 2 Shorthand
Shotcrete Quality Control and Testing for an Underground Mine in Canada
Shotcrete Quality Control and Testing for an Underground Mine in Canada By Dudley R. (Rusty) Morgan and Mazin Ezzet AMEC Earth & Environmental, a division of AMEC Americas Limited SHOTCRETE FOR AFRICA
Chapter Two Types of Cement The properties of cement during hydration vary according to:
Chapter Two Types of Cement The properties of cement during hydration vary according to: Chemical composition Degree of fineness It is possible to manufacture different types of cement by changing the
To go into depth on fly ash would be beyond the scope of this paper. Nevertheless, believe us ASH IS CASH.
COAL (FLY) ASH To go into depth on fly ash would be beyond the scope of this paper. Nevertheless, believe us ASH IS CASH. During the course of the research on my blended cement, I realized that the research
Construction Materials Testing. Classes of Test
Construction Materials Testing Classes of Test February 2014 Copyright National Association of Testing Authorities, Australia 2014 This publication is protected by copyright under the Commonwealth of Australia
SUPPORTED STANDARDS BY 01.09.2013
SUPPORTED STANDARDS BY 01.09.2013 Overview... 2 Concrete... 3 Cement... 5 Asphalt... 6 Bitumen... 8 Aggregates... 9 Soil / Geotechnical... 12 Geotextile... 12 Drilling Cores... 13 Sealing Products/Systems...
Effect of basalt aggregates and plasticizer on the compressive strength of concrete
International Journal of Engineering & Technology, 4 (4) (2015) 520-525 www.sciencepubco.com/index.php/ijet Science Publishing Corporation doi: 10.14419/ijet.v4i4.4932 Research Paper Effect of basalt aggregates
CGA Standard Practices Series. Article 600 Standard for Pozzolan Enhanced Grouts Used in Annular Seals & Well Destruction
California Groundwater Association An NGWA Affiliate State PO Box 14369 Santa Rosa CA 95402 707-578-4408 fax: 707-546-4906 email: cga@groundh2o.org website: www.groundh2o.org CGA Standard Practices Series
Blended Cement Samples 77 & 78
Blended Cement Samples 77 & 78 Please Note: $ Both of these cements are ASTM C595 Blended Hydraulic Cements. Sample No. 77 is a Type IL(10) and Sample No. 78 is a Type IL(10). $ Please allow until March
Materials for the production of primary aluminium
ISO Standards collection Materials for the production of primary aluminium Contents ISO 802:1976 Aluminium oxide primarily used for the production of aluminium Preparation and storage of test samples ISO
AGREGADOS RECICLADOS MITOS Y REALIDADES
The Production and Use of Recycled Concrete in the USA Thomas Van Dam, Ph.D., P.E., FACI Principal Engineer CTL Group Introduction In the United States, concrete is the most commonly used recycled material
Effect of Curing Temperature on Mortar Based on Sustainable Concrete Material s and Poly-Carboxylate Superplasticizer
Jan. 2014, Volume 8, No. 1 (Serial No. 74), pp. 66-72 Journal of Civil Engineering and Architecture, ISSN 1934-7359, USA D DAVID PUBLISHING Effect of Curing Temperature on Mortar Based on Sustainable Concrete
EFFECT OF NANO-SILICA ON CONCRETE CONTAINING METAKAOLIN
International Journal of Civil Engineering and Technology (IJCIET) Volume 7, Issue 1, Jan-Feb 2016, pp. 104-112, Article ID: IJCIET_07_01_009 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=7&itype=1
SITE INVESTIGATION FACILITIES
SITE INVESTIGATION FACILITIES Drilling Hydraulic rotary & calax drilling rigs100/150mm Diameter boreholes having drilling capacity up to 200m depth. Auger drilling 100/150mm diameter boreholes up to maximum
ISIDAÇ 40. building chemicals. Special cement for your special products!
ISIDAÇ 40 building chemicals Special cement for your special products! Çimsa ISIDAÇ 40 Calcium Aluminate Cement Building Chemicals Applications www.cimsa.com.tr ISIDAÇ 40 is a Calcium Aluminate Cement
CEMENT CHEMISTRY & TYPES OF CEMENT
CEMENT CHEMISTRY & TYPES OF CEMENT Cement is a hydraulic binder, i.e., an inorganic, non-metallic, finely ground substance which, after mixing with water, sets and hardens independently as a result of
MASONRY INFORMATION. Selecting and Specifying Mortar and Grout for Unit Masonry. Introduction. Desirable Mortar Properties. Selection of Mortar
Portland Cement Association MASONRY INFORMATION Selecting and Specifying Mortar and Grout for Unit Masonry Introduction Masonry mortar and masonry grout are key materials in unit masonry construction.
Schedule of Accreditation Issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Issued by 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Materials Testing Division Northdown House Ashford Road Kent ME17 1QW Contact: Ben Roper Tel: +44 (0)1622 858545 Fax: +44 (0)1622
Quality Assurance Program. June 2005 2005 by Texas Department of Transportation (512) 416-2055 all rights reserved
Quality Assurance Program June 2005 2005 by Texas Department of Transportation (512) 416-2055 all rights reserved Quality Assurance Program June 2005 Manual Notices Manual Notice 2005-1To: Users of the
EDUCATIONAL GUIDE TO PROPERTIES OF MASONRY MORTAR
EDUCATIONAL GUIDE TO PROPERTIES OF MASONRY MORTAR Contents Page Introduction 3 Specifying mortar 3 Properties of plastic mortar 4 Properties of hardened mortar 8 Glossary of terms 13 Bibliography 14 Self-assessment
Material and methods. Värmeforsk report 1212 2012 Niklas Hansson DIANAS utilization of waste inciniration bottom ash in bound construction materials
Värmeforsk report 1212 2012 Niklas Hansson DIANAS utilization of waste inciniration bottom ash in bound construction materials Executive Summary Introduction In an international perspective waste incineration
Recycled Concrete Pavement and Other Recycled Materials in Concrete Pavements
Recycled Concrete Pavement and Other Recycled Materials in Concrete Pavements Infrastructure Applications Utilizing Recycled Materials in South Carolina What/Who is NRMCA? National Ready-Mixed Concrete
Properties of Concrete with Blast-Furnace Slag Cement Made from Clinker with Adjusted Mineral Composition
Properties of Concrete with Blast-Furnace Slag Cement Made from Clinker with Adjusted Mineral Composition Atsushi YATAGAI 1, Nobukazu NITO 1, Kiyoshi KOIBUCHI 1, Shingo MIYAZAWA 2,Takashi YOKOMURO 3 and
Coal Properties, Sampling & Ash Characteristics by Rod Hatt Coal Combustion, Inc. Versailles, KY 859-873-0188
Coal Properties, Sampling & Ash Characteristics by Rod Hatt Coal Combustion, Inc. Versailles, KY 859-873-0188 Introduction The Powder River Coal is classified as sub-bituminous ranked coal. Coal rank is
Clinker grinding test in a laboratory ball mill using clinker burning with pet-coke and coal
International Refereed Journal of Engineering and Science (IRJES) ISSN (Online) 2319-183X, (Print) 2319-1821 Volume 3, Issue 9 (September 214), PP.3-34 Clinker grinding test in a laboratory ball mill using
CATALOGUE OF PRODUCTS
Sklopísek Střeleč, joint stock company produces high quality glass, foundry, technical, filtration and sport sands, fine milled silica flour. The Střeleč area represents the largest deposit of prime quality
PROPERTIES AND MIX DESIGNATIONS 5-694.200
September 1, 2003 CONCRETE MANUAL 5-694.200 5-694.210 PROPERTIES OF CONCRETE PROPERTIES AND MIX DESIGNATIONS 5-694.200 Inspectors should familiarize themselves with the most important properties of concrete:
Example Specification for Concrete using Current Building Code Requirements
Example Specification for Concrete using Current Building Code Requirements DISCLAIMER: This specification is an example that accompanies a seminar titled The P2P Initiative: Performance-based Specs for
SPECIAL COMPOUND FOR RHEOPLASTIC AND ANTI-CORROSION SUPERCONCRETE WITH VERY HIGH DURABILITY
BS 40 M6 MuCis mono SPECIAL COMPOUND FOR RHEOPLASTIC AND ANTI-CORROSION SUPERCONCRETE WITH VERY HIGH DURABILITY LE CE LE type: "expansive binder which allows the production of extremely fluid concrete
GRADATION OF AGGREGATE FOR CONCRETE BLOCK
GRADATION OF AGGREGATE FOR CONCRETE BLOCK Although numerous papers have been written concerning the proper gradation for concrete mixes, they have generally dealt with plastic mixes, and very little published
Dubai Municipality Standard DMS 1: Part 5: 2004
Specification for precast concrete blocks Part 5: Normal-weight concrete-polystyrene sandwich masonry blocks Issue Date Revision Revision Description Prepared by Approved by Authorized by 19/12/2004 Issue
FACT SHEET: HYDRATED LIME FOR MASONRY PURPOSES
FACT SHEET: HYDRATED LIME FOR MASONRY PURPOSES Hydrated Masons Lime Characteristics Type S (Special) hydrated lime is a fine, white, high purity product which has been specially hydrated for convenient,
Cementitious Materials Update The effect of ggbs, fly ash, silica fume. concrete.
Cementitious Materials Update The effect of ggbs, fly ash, silica fume and limestone on the properties of concrete. Richard Barnes Concrete Society Technical Report: Cementitious Materials - The effect
Influence of Nano-SiO 2 and Microsilica on Concrete Performance
Influence of Nano-SiO 2 and Microsilica on Concrete Performance M. Nili *a, A. Ehsani a, and K. Shabani b a Civil Eng., Dept., Bu-Ali Sina University, Hamedan, I.R. Iran b Eng., Research Institute of Jahad-Agriculture
Coal ash utilisation over the world and in Europe
Workshop on Environmental and Health Aspects of Coal Ash Utilization International workshop 23 rd 24 th November 2005 Tel-Aviv, Israel Coal ash utilisation over the world and in Europe Hans-Joachim Feuerborn
Ultra-High Strength Concrete Mixtures Using Local Materials
UltraHigh Strength Concrete Mixtures Using Local Materials Srinivas Allena 1 and Craig M. Newtson 2 1 New Mexico State University, Civil Engineering Department, P.O. Box 30001, MSC 3CE, Las Cruces, NM
EXPERIMENTAL INVESTIGATION ON BEHAVIOUR OF NANO CONCRETE
International Journal of Civil Engineering and Technology (IJCIET) Volume 7, Issue 2, March-April 2016, pp. 315 320, Article ID: IJCIET_07_02_027 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=7&itype=2
CONSULTANCY & MATERIAL TESTING FACILITY
CONSULTANCY & MATERIAL TESTING FACILITY (CIVIL ENGINEERING DEPARTMENT) JAYPEE UNIVERSITY OF ENGINEERING & TECHNOLOGY A.B. ROAD, P.B. NO-1, RAGHOGARH, DIST: GUNA (M.P.) - 473226 Phone: 07544-267051, 267310-314,
Use of Recycled Concrete Aggregates in Structural Concrete in Mauritius
Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS) 6(1): 71-81 Scholarlink Research Institute Journals, 2014 (ISSN: 2141-7016) jeteas.scholarlinkresearch.com Journal of Emerging Trends
Saint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.)
Saint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.) Gyproc Plasters The cracks in cement sand plaster are an inherent feature which cannot be completely prevented but can only be controlled and
SafetyBuletin. Concrete101 Aguidetounderstandingthequalitiesofconcrete andhowtheyaffectpumping
SafetyBuletin Concrete101 Aguidetounderstandingthequalitiesofconcrete andhowtheyaffectpumping Copyright 2008 v1.01 ACPA All rights reserved Manufacturer s recommendations supersede any and all information
ENGINEERING MATERIALS LABORATORY SECTION
AGGREGATE Page No. : 1 of 34 DCL 9 10 15 16 CHLORIDE CONTENT OF SAND & AGGREGATE ( ACID SOLUBLE ) SULPHATE CONTENT OF SAND & AGGREGATE ( ACID SOLUBLE ) SIEVE ANALYSIS OF FINE AND COARSE AGGREGATE (WET)
Hydrophobe VII., Lisbon
Hydrophobe VII., Lisbon The water repellent treatment of building materials in thermal baths Debrecen, Hungary The geothermal potential in EU János Major University of Debrecen, Faculty of Thermal baths
Analysis of M35 and M40 grades of concrete by ACI and USBR methods of mix design on replacing fine aggregates with stone dust
Analysis of M35 and M40 s of concrete by and methods of mix design on replacing fine aggregates with stone dust Satwinder Singh 1, Dr. Hemant Sood 2 1 M. E. Scholar, Civil Engineering, NITTTR, Chandigarh,
Section 902. AGGREGATES
902.01 Section 902. AGGREGATES 902.01. General Requirements. The Department may re-inspect and retest aggregates regardless of inspection at the producing plant. Provide safe access to the material for
Strength and Workability Characteristics of Concrete by Using Different Super Plasticizers
International Journal of Materials Engineering 12, 2(1): 7-11 DOI: 1.923/j.ijme.11.2 Strength and Workability Characteristics of Concrete by Using Different Super Plasticizers Venu Malagavelli *, Neelakanteswara
Client ICS/Penetron International Ltd., 45 Research Way, Suite 203, East Setauket, NY 11733 Project Information of Client Subject Laboratory Testing of Penetron Waterproofing System Report No.: 95-387
Specialty Cements. Dr. Kimberly Kurtis School of Civil Engineering Georgia Institute of Technology Atlanta, Georgia.
Specialty Cements Dr. Kimberly Kurtis School of Civil Engineering Georgia Institute of Technology Atlanta, Georgia Specialty Cements Portland cements do not always meet every need of the construction industry.
SULPHATE ATTACK AND CHLORIDE ION PENETRATION: THEIR ROLE IN CONCRETE DURABILITY
SULPHATE ATTACK AND CHLORIDE ION PENETRATION: THEIR ROLE IN CONCRETE DURABILITY Concrete durability continues to be a subject of controversy among design professionals, specifiers, Government instrumentalities,
RICE HUSK ASH POZZOLANIC MATERIAL FOR SUSTAINABILITY
International Journal of Applied Science and Technology Vol. 1 No. 6; November 2011 Abstract RICE HUSK ASH POZZOLANIC MATERIAL FOR SUSTAINABILITY Kartini. K Assoc. Prof. Ir. Dr. Faculty of Civil Engineering
APPENDIX B: EXERCISES
BUILDING CHEMISTRY LABORATORY SESSIONS APPENDIX B: EXERCISES Molecular mass, the mole, and mass percent Relative atomic and molecular mass Relative atomic mass (A r ) is a constant that expresses the ratio
Manufacturing Quality Concrete Products
CEMEX USA - Technical Bulletin 8.0 Manufacturing Quality Concrete Products Establishing or Upgrading a Quality Program Overview The following guidelines were developed for MCP (manufactured concrete products)
Advanced utilisation options for biomass gasification fly ash
15 th European Biomass Conference & Exhibition May 7 11, 2007, Berlin, Austria Advanced utilisation options for biomass gasification fly ash ICC Berlin - International Congress Center, 10 May 2007 Berlin,
STUDY OF STRENGTH OF CONCRETE WITH PALM OIL FUEL ASH AS CEMENT REPLACEMENT
International Journal of Civil Engineering and Technology (IJCIET) Volume 7, Issue 3, May June 2016, pp. 337 341, Article ID: IJCIET_07_03_033 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=7&itype=3
NorthEast Transportation Training and Certification Program (NETTCP) Course Registration Form
(NETTCP) Course Registration Form Interim Certification (Cost $300 members / $425 non-members) HMA Plant Technician* HMA Paving Inspector* Soils & Aggregate Inspector* Soils & Aggregate Lab Technician*
Lab 1 Concrete Proportioning, Mixing, and Testing
Lab 1 Concrete Proportioning, Mixing, and Testing Supplemental Lab manual Objectives Concepts Background Experimental Procedure Report Requirements Discussion Prepared By Mutlu Ozer Objectives Students
Construction. 3-part thixotropic epoxy patching mortar. Product Description. Tests
Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages
Forensic Investigation of Hardened Concrete: Water-Cement Ratio
Forensic Investigation of Hardened Concrete: Water-Cement Ratio Julius Bonini, PE - M+P Labs, Schenectady, NY boninij@mandplabs.com Andrew Smith, PhD - CERAM Research, Stoke-on- Trent, UK andrew.smith@ceram.com
A COMPREHENSIVE STUDY ON PARTIAL REPLACEMENT OF CEMENT WITH SUGARCANE BAGASSE ASH, RICE HUSK ASH & STONE DUST
International Journal of Civil Engineering and Technology (IJCIET) Volume 7, Issue 3, May June 2016, pp. 163 172, Article ID: IJCIET_07_03_016 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=7&itype=3
NOTE: FOR PROJECTS REQUIRING CONTRACTOR MIX DESIGN, THE DESIGN PROCEDURES ARE SPECIFIED IN THE SPECIAL PROVISIONS OF THE CONTRACT.
September 1, 2003 CONCRETE MANUAL 5-694.300 MIX DESIGN 5-694.300 NOTE: FOR PROJECTS REQUIRING CONTRACTOR MIX DESIGN, THE DESIGN PROCEDURES ARE SPECIFIED IN THE SPECIAL PROVISIONS OF THE CONTRACT. 5-694.301
CATALOGUE REFERENCE MATERIALS
IPT Institute for Technological Research CATALOGUE REFERENCE MATERIALS 2014 Laboratory of Metrological References IPT s Reference Materials www.ipt.br/nmr.htm Av. Prof. Almeida Prado n0 532 Predio 31 Cidade
GROUND GRANULATED BLAST FURNACE SLAG & SLAG CEMENT
GROUND GRANULATED BLAST FURNACE SLAG & SLAG CEMENT GRANULATED BLAST FURNACE SLAG Blast Furnace Slag is an industrial by-product for production of pig iron from iron ore in blast furnaces. Raw iron is decomposed
EDUCATIONAL GUIDE TO CEMENTITIOUS MATERIALS
EDUCATIONAL GUIDE TO CEMENTITIOUS MATERIALS Contents Page Introduction 3 Portland cement 3 Manufacture 3 Properties 4 British/European standards 4 Nomenclature for cements 5 Types of cement 7 Ground granulated
cement Masonry Cement Engineered for quality and reliability, Lafarge cements for masonry deliver consistent performance. page 2 Lafarge Cement
cement Masonry Cement Engineered for quality and reliability, Lafarge cements for masonry deliver consistent performance. page 2 Lafarge Cement Lafarge in North America The Lafarge Group is the world leader
Recycling and Utilization of Mine Tailings as Construction Material through Geopolymerization
Recycling and Utilization of Mine Tailings as Construction Material through Geopolymerization Lianyang Zhang, Ph.D., P.E. Department of Civil Engineering and Engineering Mechanics University of Arizona,
Metals and Non-metals. Comparison of physical properties of metals and non metals
Metals and Non-metals Comparison of physical properties of metals and non metals PHYSICAL PROPERTY METALS NON-METALS Physical State Metallic lustre (having a shining surface) Mostly solids (Liquid -mercury)
Stabilization of Soil with Self-Cementing Coal Ashes
2005 World of Coal Ash (WOCA), April 11-15, 2005, Lexington, Kentucky, USA http://www.flyash.info Stabilization of Soil with Self-Cementing Coal Ashes Scott M. Mackiewicz, 1 E. Glen Ferguson, 2 1 & 2 Kleinfelder,
Study of durability of sprayed concrete
Study of durability of sprayed concrete ADAM HUBÁČEK, RUDOLF HELA Department of Technology of Building Materials and Components Brno University of Technology, Faculty of Civil Engineering Veveří 95, 602
NATURAL STONE LABORATORY
Price List 2.015 Rev.3 Sheet 1 of 5 Natural stone: PN001 Petrographic examination EN 12407:2007 185,00 PN002A Geometric characteristics EN 13373:2003 18,00 PN003 Water absorption at atmospheric pressure
ASPHALT, CONCRETE, SOILS
NATIONAL INSTITUTE FOR CERTIFICATION IN ENGINEERING TECHNOLOGIES A division of the National Society of Professional Engineers Construction Materials Testing ASPHALT, CONCRETE, SOILS PROGRAM DETAIL MANUAL
E-learning tools for understanding and testing of a range of concrete properties
E-learning tools for understanding and testing of a range of concrete properties Prof. C.S.Poon Department of Civil and Structural Engineering, The Hong Kong Polytechnic University Team members Dr. Wallace
EXPERIMENTAL STUDY OF EFFECT OF SODIUM SILICATE (NA 2 SIO 3 ) ON PROPERTIES OF CONCRETE
International Journal of Civil Engineering and Technology (IJCIET Volume 6, Issue 12, Dec 2015, pp. 39-47, Article ID: IJCIET_06_12_004 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=6&itype=12
What is Cement? History Overview of the Cement Manufacturing Process Brief Overview of Kiln Operations Why Burn Wastes?
What is Cement? History Overview of the Cement Manufacturing Process Brief Overview of Kiln Operations Why Burn Wastes? A hydraulic cement made by finely pulverizing the clinker produced by calcining to
1.054/1.541 Mechanics and Design of Concrete Structures (3-0-9) Outline 1 Introduction / Design Criteria for Reinforced Concrete Structures
Prof. Oral Buyukozturk Massachusetts Institute of Technology Outline 1 1.054/1.541 Mechanics and Design of Concrete Structures (3-0-9) Outline 1 Introduction / Design Criteria for Reinforced Concrete Structures
IUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON ORES, AGGLOMERATES [EINECS NUMBER 265 996 3, CAS NUMBER 65996 65 8] IRON ORE PELLETS
![IUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON ORES, AGGLOMERATES [EINECS NUMBER 265 996 3, CAS NUMBER 65996 65 8] IRON ORE PELLETS](/thumbs/40/20960122.jpg "IUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON ORES, AGGLOMERATES [EINECS NUMBER 265 996 3, CAS NUMBER 65996 65 8] IRON ORE PELLETS")
IUCLID 5 COMPOSITION AND ANALYSIS GUIDANCE DOCUMENT: IRON ORES, AGGLOMERATES [EINECS NUMBER 265 996 3, CAS NUMBER 65996 65 8] IRON ORE PELLETS INTRODUCTION Each REACH registrant is required to file its
:: ARTIFICIAL SAND :: Zone One Sand : Zone Two Sand :
:: ARTIFICIAL SAND :: Natural sand are weathered and worn out particles of rocks and are of various grades or size depending on the accounting of wearing. The main natural and cheapest resource of sand
EXPERIMENT NO.1. : Vicat s apparatus, plunger
EXPERIMENT NO.1 Name of experiment:to determine the percentage of water for normal consistency for a given sample of cement Apparatus : Vicat s apparatus with plunger of 10mm dia, measuring cylinder, weighing
CONSTRUCTION MATERIAL TESTING WWW.AU.SGS.COM/INDUSTRIAL
CONSTRUCTION MATERIAL TESTING WWW.AU.SGS.COM/INDUSTRIAL Introduction For over 20 years, we have offered a full range of materials testing to suit the requirements of local, national and international civil
SETSCO SERVICES PTE LTD TEST REPORT MICROSCOPIC ANALYSIS ON THE CONCRETE CORES FROM RETAINING WALL AT CHANGI AIRPORT TERMINAL 3 REVERTON ENGINEERING(S) PTE LTD 1. INTRODUCTION 2. MICROSCOPIC ANALYSIS 3.
Utilization of Bergama Gold Tailings as an Additive in the Mortar
Utilization of Bergama Gold Tailings as an Additive in the Mortar Kubra KUNT, Meral Yıldırım, Fatma Dur*, Emek Moroydor Derun, Sabriye Pişkin Department of Chemical Engineering Faculty of Chemical and
The Concrete Life Cycle: Maintain to Sustain. Fred Goodwin BASF Construction Chemicals (EB-N) Beachwood OH
The Concrete Life Cycle: Maintain to Sustain Fred Goodwin BASF Construction Chemicals (EB-N) Beachwood OH What is Concrete? Concrete: Instant rock -just add water to make a hard wet sponge. A composite
Biomass Cofiring Overview
Biomass Cofiring Overview Larry Baxter Brigham Young University Provo, UT 84602 Second World Conference on Biomass for Energy, Industry, and World Climate Protection May 10-14, 2004 Rome, Italy Biomass
Dinamica degli inquinanti
Dinamica degli inquinanti Characterization techniques Renato Baciocchi University of Rome Tor Vergata, Rome, Italy Characterization techniques Preparation Water content Loss on Ignition, LOI Alkaline extraction
The Hydration of Heavy Metal Salts Admixtured High Alumina Cement A X-Ray Diffraction Study
Applied Physics Research November, 2009 The Hydration of Heavy Metal Salts Admixtured High Alumina Cement A X-Ray Diffraction Study R. Nithya E-mail: nivelan_15@yahoo.com S.Barathan (Corresponding author)
TABLE OF CONTENTS CHAPTER NO. TITLE PAGE NO. ABSTRACT
vii TABLE OF CONTENTS CHAPTER NO. TITLE PAGE NO. ABSTRACT LIST OF TABLES LIST OF FIGURES LIST OF SYMBOLS AND ABBREVIATIONS iii xvii xix xxvii 1 INTRODUCTION 1 1.1 GENERAL 1 1.2 OBJECTIVES AND SCOPE OF
1.3 Properties of Coal
1.3 Properties of Classification is classified into three major types namely anthracite, bituminous, and lignite. However there is no clear demarcation between them and coal is also further classified
DURABILITY OF MORTAR LININGS IN DUCTILE IRON PIPES Durability of mortar linings
DURABILITY OF MORTAR LININGS IN DUCTILE IRON PIPES Durability of mortar linings I. S. MELAND SINTEF Civil and Environmental Engineering, Cement and Concrete, Trondheim, Norway Durability of Building Materials
UMPQUA Testing Service
, LLC Materials Testing and Quality Control Services June 2016 Price List & General Terms and Conditions Page 1 of 7 , LLC Labor Rates Hourly Rates Concrete Technicians: (ODOT/ACI Certified QCT & CSTT):
Guide to Specifying Concrete Performance
Guide to Specifying Concrete Performance Phase II Report of Preparation of a Performance-Based Specification For Cast-in-Place Concrete Developed by: Kenneth C. Hover John Bickley R. Doug Hooton Reviewed
PORTUGUESE RICE HUSK ASH AS A PARTIAL CEMENT REPLACEMENT ABSTRACT
PORTUGUESE RICE HUSK ASH AS A PARTIAL CEMENT REPLACEMENT Joaquim Sampaio 1, J. Sousa Coutinho 2 and M.N. Sampaio 3 ABSTRACT This paper presents a study of Portuguese rice husk ash as a partial cement replacement,
Additional Lecture: TITRATION BASICS
Additional Lecture: TITRATION BASICS 1 Definition and Applications Titration is the incremental addition of a reagent solution (called titrant) to the analyte until the reaction is complete Common applications:
CVD SILICON CARBIDE. CVD SILICON CARBIDE s attributes include:
CVD SILICON CARBIDE CVD SILICON CARBIDE is the ideal performance material for design engineers. It outperforms conventional forms of silicon carbide, as well as other ceramics, quartz, and metals in chemical
CAUSES, EVALUATION AND REPAIR OF CRACKS IN CONCRETE
3.0 Causes and control of cracking: 3.1 Plastic Shrinkage Cracking: It occurs within 1 to 8 hours after placing, when subjected to a very rapid loss of moisture caused by a combination of factors, which
STRENGTH PROPERTIES ON FLY ASH BASED GEO POLYMER CONCRETE WITH ADMIXTURES
International Journal of Civil Engineering and Technology (IJCIET) Volume 7, Issue 3, May June 2016, pp. 347 353, Article ID: IJCIET_07_03_035 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=7&itype=3
CEMENT AND CONCRETE IN AFRICA PRESENTATION OF UNIVERSITY OF THE WITWATERSRAND SOUTH AFRICA AKINDAHUNSI A. A
CEMENT AND CONCRETE IN AFRICA PRESENTATION OF UNIVERSITY OF THE WITWATERSRAND SOUTH AFRICA BY AKINDAHUNSI A. A INTRODUCTION Concrete: Most widely used material About a ton of concrete produced per person
SECTION 18 - CAST IN PLACE HIGH PERFORMANCE CONCRETE (HPC)
SECTION 18 - CAST IN PLACE HIGH PERFORMANCE CONCRETE (HPC) 1.0 DESCRIPTION This section details the requirements for materials and methods in the proportioning, mixing, transporting, placing, finishing
North American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,
THE ELEMENT C. Introduction graphite and carbon Lattice Classification of grain size. Properties of graphite and carbon
THE ELEMENT C Introduction graphite and carbon Lattice Classification of grain size Fine-grained graphite Coarse-grained graphite Properties of graphite and carbon High temperature properties Introduction
Fly Ash Separation Technology and its Potential Applications
Fly Ash Separation Technology and its Potential Applications Yang Dong, Jinder Jow, Jianhui Su and Shih-Yaw Lai Performance Materials Center, National Institute of Clean-and-Low-Carbon Energy, P.O. Box