Google Android Internet TV Box. Instruction Manual. Model No.: NGT-20

Transcription

1 Google Android Internet TV Box Instruction Manual Model No.: NGT-0 Read all of the instructions before using this appliance and keep the instruction manual in a safe place for future reference.

2

3 Contents Important Safety Instructions Safety and product notices Disposal of your old product and batteries Product Introduction Feature highlights Accessories Product Overview Remote control Connection Connection Connect to the power supply INPUT jacks OUTPUT jacks Getting Started Connect power Prepare the remote control Find the correct input on your TV Use the Setup menu Setup SETUP menu Play Play Additional Information Specifications Troubleshooting Main unit Picture Sound Play Working with secure certificates

4 Safety and product notices Important Safety Instructions Warning: Dangerous high voltages are present inside this enclosure. To avoid electric shock, do not open the cabinet, refer servicing to qualified personnel only. To ensure the proper operation, all the safety and operating instructions should be read carefully before connection and operation.. Read these instructions.. Keep these instructions.. Heed all warnings.. Follow all instructions. 5. Do not use this player near water and keep the appliance away from rain and any moisture. Dry location use only. 6. Clean only with dry cloth. Do not clean the unit with strong chemical agents or abrasive cleaners. Never spill liquid of any kind on the product. Do not allow residue or liquids to enter any part of the appliance as this may cause risk of electrocution. Always disconnect from the mains before cleaning. 7. Do not block any ventilation openings and, install in accordance with the manufacturer s instructions. 8. Never place the product, remote control or batteries near naked flames or other heat sources such as radiators, produce heat. Do not expose the device and the remote control to direct sunlight. 9. Protect the power cord from being walked on or pinched particularly near the convenience receptacles, and the point where they exit from the player ufacturer.. Do not place this appliance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall, causing serious injury to the user and damage to the product. Do not place it on top of any other appliance The appliance is intended for household use only, and not for commercial, industrial or outdoor use. Risk of overheating! Never install the product in a confined space. Always leave a space of at least 0cm around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product. Always use the appliance with a power outlet of the same voltage (A.C. only) as marked on the appliance. No naked flame sources such as lighted candles should be placed on the apparatus. Do not operate the unit if it is not working normally or has been damaged in any way. Turn the unit off, unplug it from the power source and consult service personnel. Do not attempt to repair, disassemble or modify the appliance. There are no user-serviceable parts inside. Repairs should only be performed by qualified personnel. Do not immerse the unit, plug or cord in water or spray with liquids. Doing so may cause electric shock. Do not use the appliance with an extension cord unless this cord has been checked and tested by a qualified technician or service person. Do not let the power cord hang over the edge or a table or bench top or touch any hot surface. 8. Unplug this player during lightning storms or when it is unused for long periods of time ing is required when the player has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the player, the player has been exposed to rain or moisture, does not operate normally, or has been dropped. 0. Please keep the unit in an environment with good ventilation.. WARNING: do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and placed on apparatus.. WARNING: Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.. the appliance, batteries or discs to extreme temperatures or excessive moisture rain, sand.. In the event of a product malfunction, disconnect this appliance from the mains supply by removing the mains plug from the mains outlet. Always ensure the mains plug is accessible. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERV- ICING TO QUALIFIED PERSONNEL. Do not attempt to dismantle the appliance. You may become exposed to invisible laser radiation if the product is open or the interlock is failed or defeated, avoid direct exposure to beam. Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

5 Product Introduction Feature highlights Multimedia(FHD) Game (Local, Network) Accessories Make sure all the accessories are included with the player. If any item is damaged or missing, contact your dealer. Network Application Native, internet) Touch Machine,Instead X86 platform Support Wi-Fi, Support.G Support DLNA Support Flash 0. Support Desktop with weather,calendar,clock,note; Application Market System and application upgrade by USB and network Instruction Manual Power adaptor /abc Remote Control Batteries

6 Product Introduction Product Overview Main unit Front Panel IR. POWER button: Turn on this product or switch to standby mode.. IR sensor: Detect signals from the remote control. Point the remote control at the IR senser. Back panel 6 COMPONENT VIDEO Power LAN / RJ5 HDMI E-SATA USB.0 (5V, A MAX) ANDROID. AUDIO (STEREO) MEMORY INPUT jacks:. Power in. LAN Jack. esata jack 5.USB/// Jack 8. Jacks OUTPUT jacks:. HDMI Jack 6. YPbPr Jacks 7. YPbPr audio R/L Jacks

7 Product Introduction Remote control. POWER: Turn on the product or switch to standby mode.. MUTE: Press to mute the sound or cancel the mute state.. Buttons for entering numbers and words Press the button repeatedly to enter the numbers, words and symbols. 5 8 /abc /abc: Exchange the enter mode from number and words for the buttons above. The screen will display or abcabc when you press the button, in state you could only enter the numbers by the numbers above, and in abcabc state you could enter all by pressing the button repeatedly. Keyboard/Mouse: Exchange the enter mode from keyboard and mouse. Keyboard: you could select the items by the ENTER buttons. Mouse: you should use the buttons to move the mouse on the screen, and use ENTER button to confirm you selection. Delete: Delete the previous word you entered. 5. Home: Return to the home menu. 6. Search: Display the search menu. 7. ENTER: Buttons for menu operation. 8. : Display the current operation menu. 9. Return: Return to previous menu. 0. VOL+/-: Volume+/-. PG+/-: Page+/-. Zoom in: Zoom in the web page. Zoom out: Zoom out the web page. Play/Pause. Fast backward Fast forward Previous NEXT. Colour buttons: Spare buttons, no function.

8 Connection Connection Connect to the esata Basic connections: Input Output COMPONENT VIDEO LAN esata Power LAN / RJ5 HDMI E-SATA USB.0 (5V, A MAX) ANDROID. AUDIO (STEREO) MEMORY Note Connect to the USB device COMPONENT VIDEO Connect to the power supply Power LAN / RJ5 HDMI E-SATA USB.0 (5V, A MAX) ANDROID. AUDIO (STEREO) MEMORY COMPONENT VIDEO Note Power LAN / RJ5 HDMI E-SATA USB.0 (5V, A MAX) AUDIO (STEREO) MEMORY ANDROID. (AC00-0V Connect to the card INPUT jacks Connect to the LAN (network) Power LAN / RJ5 HDMI E-SATA USB.0 (5V, A MAX) COMPONENT VIDEO ANDROID. AUDIO (STEREO) MEMORY Power LAN / RJ5 HDMI E-SATA USB.0 (5V, A MAX) COMPONENT VIDEO ANDROID. AUDIO (STEREO) MEMORY OUTPUT jacks Connect to the HDMI jack COMPONENT VIDEO Power LAN / RJ5 HDMI E-SATA USB.0 (5V, A MAX) AUDIO (STEREO) MEMORY ANDROID.

9 Connection Connect an HDMI cable (not supplied) to: V. Tip o play digital video images via an HDMI it is necessary device content protection system). y. Connect to the YPbPr jacks Y L R Y COMPONENT VIDEO Power LAN / RJ5 HDMI E-SATA USB.0 (5V, A MAX) AUDIO (STEREO) MEMORY ANDROID. Y V. V. ip labelled as Y V. Note y. 6

10 Getting Started Connect power Caution AC power cord, ensure you have completed all other connections. Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit. Note Find the correct input on your TV. Press to turn on this product.. Turn on the TV and switch to the correct video input (refer to the TV user manual on how to select the proper input). Use the SETUP menu When first time power up, You ll see Welcome Page. It will help you to config your device. The type plate is located on the back of the product. Connect the AC power cable to a suitable wall socket. This product is ready to be set up for use. Caution Always follow the instructions in this chapter in sequence. Adjust the position of the screen Prepare the remote control Caution Due to a risk of explosion! Keep batteries away from heat, Select Language Select network and setup. Open the battery compartment.. Insert xaaa batteries with correct polarity (+/-) as indicated.. Close the battery compartment cover. Note If you are not going to use the remote control for a long time, remove the batteries. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries. Batteries contain chemical substances, so they should be disposed of properly. Setup the time 7

11 Getting Started The submenus MUSIC menu Use the number buttons on the remote control to enter the number, and use the buttons to change the position, then select Done item and press ENTER button to save and continue the next setting. Setup Time zone PICTURE menu Use the buttons to select the + or -, and press ENTER button to set the time, then select Done item and press ENTER button to save and continue the next setting. Configuration View VIDEO menu APPS menu Home screen INTERNET menu SETUP menu Press buttons to select the item and press ENTER button to enter the submenu. 8

12 Setup SETUP menu Press buttons to select the SETUP menu, then press buttons to select SETTINGS menu, press ENTER button to enter the SETTINGS menu. The Set-up application contains most of the customizing and configuring, such as language, aspect ratio, password, date&time, Wi-Fi. And you can upgrade the system here. Connecting to Wi-Fi networks Wi-Fi is a wireless networking technology that can provide Internet access at distances of up to 00 meters, depending on the Wi-Fi router and your surroundings. To use Wi-Fi on NGT-0, you access a wireless access point, or hotspot. Some access points are open and you can simply connect to them. Others are hidden or implement other security features, so you must configure the set so it can connect to them. There are numerous systems for securing Wi-Fi connections, including some that rely on secure certificates or other schemes to ensure that only authorized users can connect. For details, you can ask the network administrator. The Status bar displays icons that indicate Wi-Fi status. Connecting to Wi-Fi networks If you re adding a Wi-Fi network when first setting up, Wi-Fi is turned on automatically, so youcan skip to step. Press Home, press Set-up, and select Wi-Fi Setting. Check Wi-Fi to turn it on. Blue indicate the Wi-Fi is on, Gray is off. Choose a network to connect to it. If the network is open, you are prompted to confirm that you want to connect to that network by pressing ENTER for connection. if the network is secured, you re prompted to enter a password or other credentials.(you can ask your network administrator for details.) To receive notifications when open networks are in range By default, when Wi-Fi is on, you receive notifications in the Status bar when the system detects an open Wi-Fi network. Turn on Wi-Fi, if it s not already on. In the Wi-Fi settings screen, check Network notification. You can uncheck this option to stop notification. To add a Wi-Fi network You can add a Wi-Fi network so the system will remember it, along with any security credentials, and connect to it automatically when it is in range. You must also add a Wi-Fi network to connect to it, if it does not broadcast its name (SSID), or to add a Wi-Fi network when you are out of range of it. To join a secured network, you need to contact the network s administrator to learn what security scheme is deployed on it and to obtain the password or other required security credentials. Turn on Wi-Fi, if it s not already on. In the Wi-Fi settings screen, select Add Wi-Fi network(the item will high-lighted), and press ENTER. Enter the SSID of the network. Enter any required security credentials. 5 Save. The system connects to the wireless network. Any credentials that you entered are saved, so you are connected automatically the next time you come within range of this network. To forget a Wi-Fi network You can make the system forget about the details of a Wi-Fi network that you added, for example, if you don t want the system to connect to it automatically or if it s a network that you no longer use. Turn on Wi-Fi, if it s not already on. In the Wi-Fi setting screen, select the name of the network and press ENTER. Select Forget network and press ENTER. Android Keyboard On screen keyboard settings The Android Keyboard setting apply to the onscreen keyboard that is included with the system. ). Wi-Fi settings Wi-Fi Check to turn on Wi-Fi so you can connect to Wi-Fi networks. Network notification Check to receive an alert when an open Wi-Fi network becomes available. Add Wi-Fi network Opens a dialog where you can add a Wi-Fi network by entering its SSID (the name it broadcasts ) and security type. NOTE:For the pre-installed driver, please use the special USB wireless card. ). Ethernet configuration Ethernet Opens the ethernet. Ethernet configuration -Ethernet Devices Select the corresponding devices. -DHCP/Static IP If you check use Static IP, you can enter IP address/netmask/ DNS address/default manually, rather than n DHCP protocol to obtain network setting from the network itself. (For details, please ask the administrator of the network.) 9

13 Play ). Proxy Settings If you must visit the internet un-directly, A proxy service should be set here: the Hostname and the Port. For details, you can search from internet or ask somebody. ).Display The player outputs video signals of the highest resolution for you TV(default) If the picture is not clear, natural or to your satisfaction, try another option that suits your TV. Resolution Setting Select the type of video signals output from the HDMI out jack. 70p/080i/080p Adjust screen size After entering the screen, first press ENTER, then adjust screen size to fit display thought. 5). Applications You could find and operate the applications in the menu. You should operate according the hints on the menu. 6). Privacy You should enter the menu to reset the settings according the hints when there s some troubles with your machine. Note: All the datas will be losed except the datas in the devices. 7). Language & Keyboard You can select the language which you want. You can you use the physical keyboard freely,but must turn on the Android keyboard in the setting menu if you want to use the screen keyboard. 8). Date & Time Automatic means use network-provided values, and the system time will synchronize with the network. Set date & Set time: You can set manually. Select time zone: Select the local time zone. Use -hour format: -hour(default) Select date format: 00/0/9 & 9/0/00 & 0/9/00 9). System upgrade Warning! If the system deteces file(*.img)in the root of USB, it will upgrade. During upgrading, no progress bar, and the system will restart itself. 0. About device Information about the system can be viewed here. Play Music menu Picture menu Press buttons to select the PICTURE menu, then press ENTER button to enter the device list, select the device you want to play, and press ENTER button to display the picture files. Video menu Press buttons to select the VIDEO menu, then press ENTER button to enter the device list, select the device you want to play, and press ENTER button to display the video files. APPS menu Press buttons to select the APPS menu, then press buttons to select the menu you want, and press ENTER button to enter the submenu. INTERNET menu Press buttons to select the MUSIC menu, then press ENTER button to enter the device list, select the device you want to play, and press ENTER button to display the music files. Press buttons to select the INTERNET menu, then press buttons to select the menu you want, and press ENTER button to enter the submenu. Note: Before you enter the INTERNET menu, you should make sure the internet settings in SETUP menu are ready. 0

14 Additional Information Note notice Platform Graphic Format Power Supply Connectivity Network function Resolution Video support Dimensions Net Weight WMV9, etc Audio support

15 Troubleshooting Warning Before requesting after service please check this possible resolution. Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. Play UDF, ISO9660 or JOLIET format. or.jpeg. for Windows Media Audio..wma or.wma Main unit No reaction to the remote control Make sure the player is connected to a power outlet. Insert the batteries correctly. Point the remote control at the IR sensor located on the front panel of this product. If the remote still does not function, try putting new batteries into the remote control. Picture No entry sign appears on the TV The requested operation is not possible. Working with secure certificates If your organization s VPN or Wi- Fi networks rely on secure certificates, you must obtain the certificates and store them in the system s secure credential storage, before you can configure access to those VPN or Wi- Fi networks on the system. If your network administrator instructs you to download the certificates from a website, you re prompted to set a password for the credential storage when you download the certificates. No picture See TV manual for correct video input selection. Change the video input until you see the screen. No picture on HDMI connection If this player is connected to an unauthorized display device with an HDMI cable, the audio/video signal may not be displayed. Check if the HDMI cable is faulty. If faulty or damaged, replaced the HDMI cable. Check your display device if the appropriate input was selected. playback. Sound No audio output from the TV Ensure that the audio cables are connected to the audio input of the TV. Assign the audio input of the TV to the corresponding video input. See the TV user manual for details. No audio output from the loudspeakers of the audio de Ensure that the audio cables are connected to the audio input of the audio device. Turn the audio device to the corresponding audio input source for the player. No sound on HDMI connection You may not hear any sound from the HDMI output if the connected device is non-hdcp compliant or only DVIcompatible.

16