CORE RANGE FALL PROTECTION PRODUCT CATALOGUE GLOBAL LEADER IN FALL PROTECTION HEIGHT SAFETY CONFINED SPACE INDUSTRIAL RESCUE

Transcription

1 CORE RANGE FALL PROTECTION PRODUCT CATALOGUE GLOBAL LEADER IN FALL PROTECTION HEIGHT SAFETY CONFINED SPACE INDUSTRIAL RESCUE

2 THE VERY BEST IN FALL PROTECTION We ve covered your industry for years. For more than 70 years, we have earned the trust of companies and people around the world by putting all our energy and all our expertise into achieving our mission: DEDICATED TO BRINGING EVERY WORKER AT HEIGHT HOME SAFELY. Capital Safety is the world s leading manufacturer of fall protection safety equipment including height safety, confined space and industrial rescue. Through our leading operating brands, DBI-SALA & Protecta, we deliver the right solution to our customers across Australia & New Zealand. The Ultimate in Fall Protection The DBI-SALA brand embodies a commitment to excellence and innovation with its extensive range of fall protection solutions, designed to keep you working at height; safely, efficiently, comfortably. The ultimate in fall protection for any work environment. Trusted, quality Fall Protection With over 50 years experience, the Protecta brand provides the complete line of fall protection products you can rely on, at exceptional value. WHERE OUR EXPERTISE EXTENDS: CHEMICAL UTILITIES SHIPPING TRANSPORT MINING TELECOMS TRANSPORT MANUFACTURING WIND ENERGY Quality ISO 9001 All DBI-SALA & PROTECTA products are certified to meet or exceed Australian and New Zealand Standards where applicable. This product range brochure is designed as an introductory guide to the full complement of Height Safety, Confined Space and Industrial Rescue Equipment available. Please call or visit our website for more information on our complete range of products and services. KEY For more information, call (AUS) (NZ) Mining Indicates the product can be used for commercial underground and industrial mining areas. Permanent Indicates the product is a permanent attachment (once fixed, cannot be removed) HD16kN Heavy Duty 16kN rated side gate HD160kg Temporary Indicates the product can be manipulated to some extent after fixture for a short period Removable Indicates the product can be re-used again after intial fixture with unlimited uses and is mobile. Heavy Duty All DBI-SALA and Protecta Lanyards are rated to 160kg 2

3 THE OF FALL PROTECTION nchorages are a secure point of attachment. Anchorage connectors vary by industry, job, type of installation and structure. They must be able to hold fast under more than a ton of force generated in a fall. ody Support harnesses distribute fall forces over the upper thighs, pelvis, chest and shoulders. They provide a connection point on the worker for the personal fall arrest system. onnectors such as shock absorbing lanyards or self retracting lifelines connect a worker s harness to the anchorage. escent and rescue devices are used to retrieve an injured worker or lower him to the ground. ducation - Capital Safety offers a variety of free resources, training and consultative services to fit your needs. CONTENTS in this edition Anchorages Anchors / Specialised Anchors Horizontal Systems / Anchor Straps / Lifelines / Anchorage Devices Body Harnesses ExoFit NEX Harnesses DELTA Harnesses Fall Protection Kits / DBI-SALA Miners Belts 15 PRO Harnesses / Protecta Miners Belts / Kits Connectors Karabiners / Snap Hooks / Scaffold Hooks / Rope Grabs & Lifelines / Vertical Systems / Pole Straps EZ-Stop Shock Absorbing Lanyards / Force2 Shock Absorbing Lanyards Nano-Lok SRL / Nano-Lok LE SRL / Nano-Lok Hot Works / Talon SRL / Ultra-Lok SRL / Sealed Blok SRL / Load Arrestors / SRL Accessories / Rope Grabs & Lifelines / Karabiners / Snap Hooks Rebel SRL / Shock Absorbing Lanyards / Pole Strap Descent & Rescue Tripods / Emergency Retrieval Sealed Blok SRL / Winches / Retrieval SRL Hitch Mount / Bosuns Chairs / Spreader Bar / PFAS / 5-Piece Hoist System / Side Entry System / Bases and Mounting Options / Rescue Systems / PenoGuard / Protecta Confined Space Equipment Rollgliss Technical Rescue Speciality Systems FlexiGuard Access Systems / i-safe / Ladder Levelling/Stabilising Range DBI-SALA Engineered Systems / Netting Systems 42 Accessories 43 Education & Resources Fall Protection Training 46 Site Inspection & Reporting Service 47 Hot Work Indicates the product can be used in high temperature or hot work applications. Arc Flash Indicates the product can be used in arc flash environments. QR Code If you see this code on a page, you can scan it with your smart phone / tablet using a QR scanner/reader (available from your device s app store). Impact Indicator This symbol indicates the SRL has a visual fall indicator that becomes visible when the device has been impact loaded. i-safe Enabled The i-safe enabled icon allows you to easily identify i-safe enabled DBI-SALA products. Keep an eye out for the icon throughout this catalogue. Sharp Edge Indicates the product can be used in sharp edge applications AUS: NZ:

4 in this edition... WELDERS HARNESS Page 17 NANO-LOK LE NANO-LOK HOT WORKS SEALED BLOK SRL WELDERS LANYARDS SEALED BLOK RETRIEVAL SRL Page 23 Page 24 Page 25 Page 27 Page 28 ADVANCED BASIC WINCH RETRIEVAL SRL MOUNTING BRACKET R550 RESCUE & ESCAPE DEVICE REBEL RETRIEVAL SRL Page 28 Page 28 Page 30 Page 31 A ANCHORAGES ANCHORS Structural Mount L4543 L4544 L4550 L4551 L Saflok Toggle Anchor D-ring with anchorage plate D-ring Anchor Concrete Mount Saflok Concrete wedge anchor Concrete detent anchor Bolt on, with swivel D-ring Roof Mount Purlin mounted for steel roofs Truss mounted for steel or tiled roofs Purlin mounted, for flat pan applications Purlin mounted, for corrugated iron applications Purlin mounted, for spandeck applications Anchor on the Go TM, for sheet metal roofs Mining Anchors Saflok Mining Bolt Anchor with swivelling O-ring Saflok Hybrid Bolt Mining Swivel Anchor L4544 L L4550 L4551 L4552 4

5 CONFINED SPACE KITS A bigger & better ROLLGLISS TECHNICAL RESCUE RANGE Page 31 Page 32 I-SAFE 3.1 Page 40 BACK OF RACK NETTING Page 42 UTILITY TOOL POUCHES Page 43 BAGS Page 43 TOOL LANYARDS Page 43 THE CAPITAL SAFETY RESOURCE CENTRE APP Page 44 CAPITAL SAFETY SITE INSPECTION REPORTING SERVICE (CSIRT) Page 47 SPECIALISED ANCHORS MODEL Beam Anchors Beam trolley, adjustable Glyder TM 2 sliding beam anchor, adjustable Fixed beam anchor, adjustable Door Jamb Anchor Door/Window Jamb Anchor First-Man-Up Systems m working length m working length Vacuum Anchor System Mobi-Lok TM self-contained vacuum anchor Also available: Industrial and aviation compliant versions, Shop-air model AUS: NZ:

6 A ANCHORAGES HORIZONTAL SYSTEMS P P P P P Sayfline Temporary Lifeline Rope Systems. Up To 2 Users 15M 20M 25M 30M 35M Securaspan Temporary Horizontal Lifeline Wire Cable Systems. Up To 6 Users (2 Per Span) 6M 9M 12M 15M 18M EZ-Line Retractable Horizontal Lifeline Wire Cable System. Up To 6 Users (2 Per Span) 18M P Note: DBI-SALA Engineered permanent horizontal lifeline systems and Sayfline post and base system also available. ANCHOR STRAPS E E E E E E E E E E E E E E Tie-Off Adaptor with Interlocking Rings. 75mm web 0.5m 0.8m 1m 1.2m 1.5m 2m Round Strap. 45mm web 0.6m 1m 1.2m 1.5m 2m Flat Strap. 45mm web m 1.2m 1.5m E ANCHOR STRAPS Dual Ring Tie-Off Adaptor, Cable m m m Tie-Off Adaptor with Interlocking Rings AM500/100AU 1.0m AM500/150AU 1.5m Webbing Round Strap AM450/120AU 1.2m AM450/150AU 1.5m AM500/150AU AM450/120AU LIFELINES m web temporary horizontal lifeline (thll), rated for two users

7 E E All DBI-SALA Anchor Straps are i-safe Enabled ANCHORAGE DEVICES AJ703A AJ720A AM210 AM211 Raildog rail anchor Concrete anchor (includes mechanical fixings) Fixed anchorage plate Fixed anchoring ring AJ703A AM210 AJ720A AM211 AUS: NZ:

8 B BODY HARNESSES GET INTO THE BEST! Stand-Up Dorsal D-ring Covered Labels and i-safe Impact Indicator Revolver Vertical Torso Adjusters Tech-Lite Aluminium D-rings Integrated Suspension Relief Straps Reflective Material Ultra-Soft Edging Scan the QR Code to view our ExoFit NEX range and support materials 8

9 Harnesses need to fit correctly for optimum comfort, safety and productivity. DBI-SALA harnesses are available in small, medium, large and extra-large for a perfect fit every time. COMFORT. FUNCTION. DURABILITY. The Next Generation Full Body Harness Hybrid Comfort Padding Moulded Lanyard Keepers Built-In Carrying Pocket Rigid Hip Padding Loops Repel Technology Webbing BONUS Harness storage back pack with every ExoFit NEX harness. Duo-Lok Quick-Connect Buckles *30 Day Comfort Guarantee on all ExoFit NEX harnesses. If you re not completely satisfied, return your ExoFit NEX harness within 30 days of purchase for a full refund. AUS: NZ:

10 B BODY HARNESSES EXOFIT NEX RIGGERS HARNESS Ideal for use as a professional general purpose harness in rigging, ladder climbing and confined space access work Front and rear Tech-Lite aluminium D-rings, Duo-Lok quick-connect buckles, Revolver vertical torso adjusters, non-slip hybrid comfort padding, suspension trauma straps, confined space loops, impact indicator, REPEL technology webbing EXOFIT NEX CROSS-OVER HARNESS Ideal for the professional performing roof construction, maintenance and ladder access work Front and rear Tech-Lite aluminium D-rings, Duo-Lok quick-connect buckles, Revolver vertical torso adjuster, non-slip hybrid comfort padding, suspension trauma straps, impact indicator, REPEL technology webbing Note: Ideal for women 603S M L XL2018 Extra 613S M L XL2016 Extra EXOFIT NEX CONFINED SPACE HARNESS Ideal for the professional performing confined space access work, ladder access and rescue Front, rear and side Tech- Lite aluminium D-rings, Duo-Lok quick-connect buckles, Revolver vertical torso adjusters, nonslip hybrid comfort padding, wide padded lower back/hip pad, suspension trauma straps, confined space loops, impact indicator, REPEL technology webbing EXOFIT NEX TOWER WORKERS HARNESS Ideal for the professional performing pole work, rigging and work positioning Front, rear and side Tech-Lite aluminium D-rings, Duo-Lok quick-connect buckles, Revolver vertical torso adjusters, wide padded lower back/hip pad, work positioning/ suspension seat with tanged pole D-rings (can be secured out of the way for unhindered climbing), non-slip hybrid comfort padding, suspension trauma straps, impact indicator, REPEL technology webbing 623S M L XL2018 Extra 653S M L XL4016 Extra EXOFIT NEX WIND ENERGY HARNESS Ideal for the professional wind tower worker, uniquely designed with specialised features for wind energy needs Front and rear Tech-Lite aluminium D-rings, side D-rings, Duo-Lok quickconnect buckles, Revolver vertical torso adjuster, wide padded lower back/hip pad, removable tongue buckle waist belt, dorsal webbing and lumbar protectors, built in radio holster, tool D-rings, non-slip hybrid comfort padding, suspension trauma straps, impact indicator REPEL technology webbing EXOFIT NEX SUSPENSION HARNESS WITH CHEST ASCENDER Ideal for the professional ascending working lines Front, rear, side and abdominal Tech-Lite aluminium D-rings, integral chest ascender, Duo-Lok quick-connect buckles, padded lower back/hip pad, gear loops, non-slip hybrid comfort padding, REPEL technology webbing 603S M L XL4044 Extra 783S M L XL4010 Extra Also available: models with additional features suitable for specific industry applications 10

11 EXOFIT NEX FLOTATION HARNESS Ideal for the professional requiring both fall and buoyancy protection in open or closed waters 275N integral personal flotation device, rear stainless steel D-ring, front fall arrest loops, stainless steel quickconnect buckles, non-slip hybrid comfort padding, suspension trauma straps, impact indicator, REPEL technology webbing (also available with 300N MED/ SOLAS personal flotation device) EXOFIT NEX SIT HARNESS Ideal for the professional performing rescue and emergency services, industrial rope access and abseiling work Side Tech-Lite aluminium D-rings, Duo-Lok quickconnect buckles, front belay loops, padded lower back/ hip pad, tool & gear loops, non-slip hybrid comfort padding, REPEL technology webbing 603S M L XL1034 Extra 673S M L XL4002 Extra EXOFIT NEX CLIMBING HARNESS Ideal for the professional performing rescue and emergency services, industrial rope access, abseiling and tower work Front, rear, side and abdominal Tech-Lite aluminium D-rings, Duo-Lok quick-connect buckles, padded lower back/hip pad, tool & gear loops, non-slip hybrid comfort padding, REPEL technology webbing 683S M L XL4016 Extra EXOFIT NEX DERRICKMANS HARNESS Ideal for the professional oil industry personnel when working on the derrick/ monkey board Front, rear (with extension), side and rear lower back Tech- Lite aluminium D-rings, Duo- Lok quick-connect buckles, Revolver vertical torso adjusters, non-slip hybrid comfort padding, seat sling with positioning/ suspension D-rings, suspension trauma straps, impact indicator, REPEL technology webbing (optional: monkey board belt , high performance suspension seat ) 693S M L XL4017 Extra EXOFIT NEX SUSPENSION HARNESS Ideal for the professional performing rescue and emergency services, industrial rope access, abseiling and tower work Front, rear, side and abdominal Tech-Lite aluminium D-rings, Duo-Lok quick-connect buckles, padded lower back/hip pad, gear loops, non-slip hybrid comfort padding, REPEL technology webbing EXOFIT NEX MINES RESCUE HARNESS Ideal for use by mining industry personnel for use with battery packs, self rescuers and re-breathers Front and abdominal Tech-Lite aluminium D-rings, side aluminium karabiners, integral chest ascender, Duo-Lok quick-connect buckles, sewn-in wide padded miners belt incorporating battery and self rescue straps, gear loops, non-slip hybrid comfort padding, REPEL technology webbing 783S M L XL4016 Extra 783S M L XL4035 Extra AUS: NZ:

12 B BODY HARNESSES DELTA FULL BODY HARNESSES Harnesses need to fit correctly for optimum comfort, safety and productivity. DBI-SALA harnesses are available in small, medium, large and extra-large for a perfect fit every time. REPEL TECHNOLOGY WEBBING Water repellent to reduce attraction of mould and dirt up to 5 times more abrasion resistance. QUICK-CONNECT BUCKLES Offers one-handed operation and smooth adjustment. EASY GRIP END TABS AND KEEPERS For fast, efficient and secure web adjustment. STAND-UP DORSAL D-RING Patented spring-loaded design automatically stands up ensuring fast, easy and safe connections to your fall arrest system. IMPACT INDICATOR Rip-stitch indicator allows the user to quickly and easily inspect the harness for impact loading. LABEL PACK Laminated PVC labels resistant to abrasion, UV, ambient heat, water and a wide range of chemicals. Features permanent indented print of critical product information ensuring it remains visible for the life of the harness. i-safe INTELLIGENT SAFETY SYSTEM i-safe enabled to track inspections, control inventory and manage information. ENABLED BONUS Harness storage bag with every DELTA harness Scan the QR Code to view our DELTA range and support materials 12

13 DELTA RIGGERS HARNESS Ideal for use in rigging, confined space, ladder access and general height safety rear fall arrest rated stand-up D-ring, front fall arrest rated D-ring, confined space/retrieval attachment points, quick-connect buckles, corrosion resistant hardware fully adjustable, REPEL technology webbing DELTA CROSS-OVER HARNESS Ideal for use in roof construction, maintenance and ladder access work rear fall arrest rated stand-up D-ring, front fall arrest D-ring, quick-connect buckles, corrosion resistant hardware, fully adjustable, REPEL technology webbing Note: Ideal for women 803S M L XL0018 Extra 813S M L XL0016 Extra DELTA ALL PURPOSE HARNESS Ideal for use in multi purpose access including confined space entry, rigging, ladder access work and work positioning at height rear fall arrest rated stand-up D-ring, front fall arrest rated D-ring, confined space/ retrieval attachment points, waist belt with side D-rings, quick-connect buckles, corrosion resistant hardware, fully adjustable, REPEL technology webbing DELTA TOWER WORKERS HARNESS Ideal for use by telecommunications and power industry personnel when working on towers and poles rear fall arrest rated stand-up D-ring, frontal fall arrest/belay loops, confined space/ retrieval attachment points, padded waist belt with side D-rings, pole/restraint D-rings, quick-connect buckles, corrosion resistant hardware, fully adjustable, REPEL technology webbing 823S M L XL0018 Extra 853S M L XL0018 Extra DELTA MINERS HARNESS Ideal for use by mining industry personnel for use with battery packs and self rescuers rear fall arrest rated stand-up D-ring, front fall arrest rated D-ring, confined space/retrieval attachment points, integral miners belt with battery and self rescue straps, reflective tape, suspension trauma straps, quick-connect buckles, corrosion resistant hardware, fully adjustable, REPEL technology webbing DELTA LIVE LINE HARNESS (Resistant to electrical conductivity)* Ideal for use when working on high and low voltage live lines from an EWP vehicle Rear fall arrest rated webbing loop with integrated dorsal extension, frontal fall arrest/belay loops, confined space loops, leather insulators, no metal hardware above the waist, quick-connect buckles, corrosion resistant hardware, fully adjustable, REPEL technology webbing *No metal hardware above the waist 823S M L XL0035 Extra 803S M L XL0009 Extra Also available: models with additional features suitable for specific industry applications AUS: NZ:

14 B BODY HARNESSES MORE DELTA HARNESSES (CONT. FROM PREVIOUS PAGE). DELTA WELDERS HARNESS* Ideal for use in Hot Work and arc flash environments Rear stand-up D-ring, front fall arrest rated loops, confined space loops, Nomex /Kevlar fibre webbing, dielectric hardware *Arc flash, flame, heat and cut resistant Nomex and Kevlar are registered trademarks of E.I. du Pont de Nemours and Company 320S2066NK 320M2066NK 320L2066NK 320XL2066NK Extra DELTA SUSPENSION HARNESS Ideal for Rescue and emergency services, industrial rope access, abseiling and tower work. Front, rear, side and abdominal D-rings, quick adjust buckles, padded lower back/hip pad, tool O rings, fully adjustable, REPEL technology webbing Note: Also conforms to AS/NZS & 2 Twin Rope Access Standard 883S M L XL4016 Extra DELTA BA RESCUE/ESCAPE HARNESS Ideal for use with rescue/escape breathing apparatus equipment rear fall arrest rated D-ring, front fall arrest rated D-ring, confined space/ retrieval attachment points, quick-connect buckles, stainless steel hardware, air line attachment straps, rear BA pigtail connection strap, fully adjustable, REPEL technology webbing. Note: Hip mounted escape cylinder bag to be supplied by customer for attachment to harness DELTA BA HARNESS Ideal for Use with large cylinder breathing apparatus equipment Dorsal extension with large fall arrest rated D-ring, front fall arrest rated D-ring, confined space/retrieval attachment points, quick-connect buckles, waist belt with side D-rings, stainless steel hardware, wide padded lower back/hip pad, shoulders, back and waist protection pad with tank attachment straps, fully adjustable, REPEL technology webbing. 823S S M M L L XL1050 Extra 823XL1051 Extra For illustrative purposes only. Breathing Apparatus equipment not included. For illustrative purposes only. Breathing Apparatus equipment not included. DELTA DERRICKMANS HARNESS Ideal for oil industry personnel when working on the derrick/ monkey board rear fall arrest rated stainless steel D-ring with dorsal extension, front fall arrest rated stainless steel D-ring, waist belt with large side angled D-rings, rear lower back stainless steel D-ring, wide padded lower back/hip pad, rigid crossover abdominal pad, removable seat sling with stainless steel D-rings, stainless steel quick-connect buckles on chest, waist and leg straps, confined space/retrieval attachment points, fully adjustable, impact indicator, REPEL technology webbing. 593S M L XL4019 Extra Also available: models with additional features suitable for specific industry applications 14

15 FALL PROTECTION KITS Suited for specific worker applications, our kits include all the necessary components of the ABC of fall protection to ensure worker safety Cherry Pickers Kit, includes: DELTA 321M-0018 Riggers Harness with adjustable integral EZ-Stop lanyard, Equipment / Kit Bag Construction Workers Kit, includes: DELTA 380M-0018 All Purpose Harness, m Talon SRL s, Z EZ-Stop 2.0m Lanyard, E Tie-Off Adaptor, Equipment/Kit Bag Professional Roof Workers Kit, includes: DELTA 360M-0016 Roof Workers Harness, Z EZ-Stop 1.0m Lanyard, P m Rope and Rope Grab, R-105-S Screw Gate Karabiner, E Tie-Off Adaptor, Equipment / Kit Bag Professional Roof Workers Kit without harness, includes: Z EZ-Stop 1.0m Lanyard, P m Rope and Rope Grab, R-105-S Screw Gate Karabiner, E Tie-Off Adaptor, Equipment / Kit Bag Live Line Kit, includes: DELTA 305M-0019 Live Line Harness, Z RPX EZ-Stop Live Line 1.7m Lanyard, Storage Bag Stock Pickers Kit, includes: 320M-0019 DELTA Riggers Harness with dorsal extension, Talon SRL s with stock pickers cab mount bracket and swivel snap hook, Equipment / Kit Bag M DELTA Mine Utility Kit,, includes: 324M-0019 DELTA Riggers Utility Harness with dorsal extension, E404M Mine Utility Belt, Equipment / Kit Bag Also Available: small, large and extra large sizes M Exofit Nex Mine Utility Kit,, includes: 603M1021 ExoFit NEX Riggers Utility Harness with dorsal extension, E404M Mine Utility Belt, Equipment / Kit Bag Also Available: small, large and extra large sizes M MINERS BELTS E100M-0051 E100M-0179 E100M-0837 E112M-0033 E404M, with rear D-ring, battery pack and self rescue straps with velcro, reflective tape on rear, with rear D-ring, fixed braces, battery pack and self rescue straps with velcro, reflective tape on front and rear, with 2 front D-rings, detachable braces, battery pack and self rescue straps, reflective tape on front and rear, with detachable battery pack and self rescue straps, 2 front D-rings, reflective tape along entire length of belt Mine Utility Belt,, with wide cushioned body pad, leather tongue buckle adjustment/closure, PVC coated battery and self rescuer attachment strap, fluorescent webbing and harness locating attachment/ detachment straps. Specially designed to fit and be used in conjunction with the ExoFit NEX & DELTA Riggers Utility Harness Note: Miners belts are available in small, medium, large and extra large. E100M-0051 E112M-0033 E100M-0179 E100M-0837 E404M Also available: Other mining belt models with additional features suitable for specific industry applications AUS: NZ:

16 B BODY HARNESSES ABSOLUTE CONFIDENCE, COMFORT AND SAFETY. All PRO Harnesses comply with AS/NZS PRO CLIMBING HARNESS Ideal for rigging, rescue, construction, elevated work platforms, ladder access work and general height safety Front & rear fall arrest rated D-ring, quick donning & easy adjust hardware, sub-pelvic strap, adjustable chest, shoulder & leg straps, supplied with keepers to maintain adjustment MOD DEL # DES CRI PTION AB S AB M 3M AB L 4L PRO CLIMBING HARNESS WITH ELASTICATED INTEGRAL LANYARD & SCAFFOLD HOOK PRO CLIMBING HARNESS WITH ADJUSTABLE INTEGRAL LANYARD & 16KN SNAP HOOK MOD EL # AB S AB M AB L DES CRI PTI ON Lar rge MOD EL # DESCRI CRIPTI ON AB S AB M Med ium AB L HD16kN PRO RETRIEVAL HARNESS Ideal for confined space access, rigging, construction, work positioning, restraint work and general height safety Rear fall arrest rated D-ring, sliding shoulder D-rings, quick donning & easy adjust hardware, sub-pelvic strap, adjustable chest, shoulder & leg straps, supplied with keepers to maintain adjustment MOD EL # DES CRI PTI ON AB S Sma ll AB M Med ium AB L PRO CONSTRUCTION HARNESS Ideal for rigging, construction, work positioning, restraint work and general height safety Front & rear fall arrest rated D-ring, quick donning & easy adjust hardware, sub-pelvic strap, integrated shoulder & lower back pads, adjustable chest, shoulder & leg straps, supplied with keepers to maintain adjustment MODEL # DESCRI PTION AB1 0442S Sma ll AB1 0443M Med ium AB1 0444L4 4L Lar ge BONUS Harness storage bag with every Protecta harness 16

17 PRO WELDERS HARNESS Ideal for use during welding, cutting, electrical maintenance and other high temperature Hot Work applications rear fall arrest rated D-ring, Front fall arrest rated D-ring, Pass-thru buckles on chest and leg straps, Anti-slip adjustment system, Durable polyester Kevlar fibre webbing construction, Protected labels. Kevlar is a registered trademark of E.I. du Pont de Nemours and Company MOD EL # DES CRIPTI PTION AB WS Sma ll AB WM Med ium AB WL PRO TOWER WORKERS HARNESS Ideal for Use in linesman/tower work, and industries where a harness must be used for climbing, suspension, positioning or rescue Front & dorsal fall arrest rated D-ring, pelvic strap, confined space access loops, adjustable waist belt, leg, shoulder & chest straps, side D-rings, tool loops, integral dorsal extension, pole / restraint side attachment points, work positioning buttock seat, wide padded lower back pad MODEL # DESCRI PTI ON AB1 119/ 19/2AU AB119L 19L/2A U Lar ge FIRST HARNESSES The FIRST range of fall protection products by PROTECTA offers straightforward fall protection equipment at an affordable price, ideal for first time or occasional users of height safety equipment. Fall Arrest Harness Ideal for general maintenance and construction work Rear fall arrest rated D-ring, front fall arrest loops, adjustable leg straps, adjustable chest strap, pelvic strap for added security Fall Arrest Harness with Integral Adjustable Lanyard Ideal for cherry pickers and other elevated work platforms (EWP) Rear fall arrest rated D-ring, front fall arrest loops, integral adjustable rear lanyard with shock absorber, adjustable leg straps, adjustable chest strap, pelvic strap for added security AB17510AU AB17510 / 36AU MINERS BELTS Ideal for use with battery packs and self rescuers in mining applications PVC coated detachable battery pack and self rescue straps, reflective tape, single rear D-ring, double D-ring at front, padded waist pad for comfort, fully adjustable, lightweight AB002AU AB001AU Integral crossover shoulder straps Padded waist pad for comfort AB002AU AB001AU KITS AA400AU AA1000AU AA410AU AA1020AU PROTECTA Roof Workers Kit PRO Climbing Harness (AB11343), 15m kernmantle rope lifeline with 0.55m integral shock absorbing lanyard, 1.5m tie-off adaptor anchor strap (AM500 / 150AU), backpack storage bag FIRST Roof Workers Kit First Fall Arrest Harness (AB17510AU), 15m kernmantle rope lifeline with 1m integral shock absorbing lanyard, 1.5m round anchor strap (AM450 / 150FAU), packed in a rugged re-useable carry bucket PROTECTA Construction Workers Kit PRO Climbing Harness (AB11343), 3.3m Rebel SRL s (AD111ARA), 1.5m round anchor strap (AM450 / 150AU), backpack storage bag FIRST Construction Workers Kit First Fall Arrest Harness (AB17510AU), 2.1m retractable lanyard, 1.5m round anchor strap (AM450 / 150FAU), packed in a rugged re-useable carry bucket AA1000AU AA410AU AUS: NZ:

18 C CONNECTORS KARABINERS R-105-S R-105-S-CE R-517 HD16kN Double Action Screw Gate 18mm gate opening 18mm gate opening with captive eye 26mm gate opening with captive eye* R (R-523) R (R-108) R-113 R-119 HD16kN HD16kN HD16kN HD16kN HD16kN HD16kN Double Action Autolock 14mm gate opening with captive eye 20mm gate opening with captive eye* (formerly R-523) 25mm gate opening 54mm gate opening with captive eye* (formerly R-108) Triple Action Autolock 18mm gate opening with captive eye (aluminium)* 18mm gate opening with integral eye (aluminium)* This product is manufactured to be permanently attached to spliced or webbing lanyards and other height safety products and is not sold separately. 20mm gate opening with captive eye* 20mm gate opening with captive eye (stainless steel)* R-105-S R-105-S-CE R-517 R TRIPLE ACTION CONNECTIVITY R R-113 R-119 SNAP HOOKS HD16kN HD16kN HD16kN HD16kN HD16kN HD16kN HD16kN 19mm gate opening* 19mm gate opening* 19mm gate opening (stainless steel)* 19mm gate opening (steel gate and aluminium body)* 20mm gate opening (specifically designed for tie-back use)* Triple action, 20mmgate opening* 21mm gate opening (steel gate and aluminium body)* TRIPLE ACTION CONNECTIVITY SCAFFOLD HOOKS H202 HD16kN HD16kN HD16kN HD16kN 59mm gate opening* Triple action, 63.5mm gate opening (steel gate and aluminium body)* 65mm gate opening* 87mm gate opening* 110mm gate opening TRIPLE ACTION CONNECTIVITY H202 The snap hooks and scaffold hooks, except H202, featured on this page are manufactured to be permanently attached to spliced or webbing lanyards and other height safety products and are not sold separately. *These karabiners, snap hooks and scaffold hooks feature 16kN rated side gates. 18

19 ROPE GRABS & LIFELINES P AC202/02AU Lifeline with Integral Manual Rope Grab (horizontal / angle work) 15m system, 11mm kernmantle rope, rope grab and H205 hook Also available: other length systems Cobra Automatic Rope Grab (horizontal / vertical work) Includes karabiner and integral shock pack, for use on 12-14mm 3 strand rope or 11-13mm kernmantle rope P AC202/02AU VERTICAL SYSTEMS LS-B LS-W Lad-Saf Kits Bolt on system, galvanised Weld on system, galvanised Also available: stainless steel models Lad-Saf Sleeves Lad-Saf sleeve with karabiner Lad-Saf sleeve with karabiner and shock pack Also available: Specialty Lad-Saf climb assist systems Railok 90 rail systems Mastsayf tower systems POLE STRAPS Lad-Saf System E601 Series E613 Series E613 RPY Series E850 Series E902 Series Webbing Pole Strap with Double Action Snap Hooks & Friction Adjuster Available in 2m, 2.5m, 3m Pole Strap with Light Weight Aluminium Double Action Snap Hooks & Friction & Adjuster Plate Available in 2m, 2.5m, 3m REPEL Pole Strap with Repel Technology Webbing, Double Action Trigger Snap Hooks and Friction & Adjuster Plate 2.5m, 3.0m, 3.5m Wire Wire Core Pole Strap with Rope Grab & Double Action Snap Hook Available in 3m, 4m Rope Rope Pole Strap Range with lightweight rope grab adjuster and a range of end fittings including stainless steel, steel or aluminium triple or double action karabiners and double action aluminium snap hooks. Available in 2m & 2.5m lengths E E613RPY E613-B E E M E E E Latch Protection Devices (LPD) are standard on all DBI-SALA Webbing Pole Straps AUS: NZ:

20 C CONNECTORS EZ-STOP SHOCK ABSORBING LANYARD RANGE HD160kg Z ZP X Z Z Z Z Z Z E Z E Z E Kermantle Rope Single tail 2.0m overall length Single tail, adjustable, 2.0m overall length Webbing Shock absorbing unit, with captive eye karabiners on both ends Single tail 2.0m overall length Single tail, adjustable 2.0m overall length Single tail, adjustable 2.0m overall length Single tail, adjustable, 2.0m overall length Single tail, elasticated 2.0m overall length Single tail, elasticated 2.0m overall length Double tail, elasticated rope 2.0m overall length Z ZP X Z Z FORCE2 RANGE FORCE2 SHOCK ABSORBING LANYARD RANGE HD160kg HD16kN The FORCE2 shock absorbing Lanyard range is light, strong and durable. Z Z E Z WB Z R Z R Z R Z CR Z WR Single tail, adjujstable, 2.0m overall length Twin tail, elasticated, 2.0m overall length WrapBax Tie-Back, Single tail, 2.0m overall length Single tail, 2.0m overall length Twin tail, 2.0m overall length Twin tail, adjustable, 2.0m overall length with Cut resistant, single tail, 2.0m overall length Single tail, 2.0m overall length WEBBING RANGE Single tail lanyard Available in either flat webbing (adjustable or non adjustable), or elasticated webbing variants. Z Twin tail lanyards Available in either flat webbing (adjustable or non adjustable), or elasticated webbing variants. CABLE RANGE Single tail lanyard Available in single or twin tail variants. ROPE RANGE Single tail lanyard Twin tail lanyards Z R Z R Z WR SPECIALTY RANGE WIND ENERGY RESCUE LANYARD Incorporating rescue D-rings and heavy duty wear pads, this lanyard has been specifically designed and developed to meet the demands of the wind energy industry. Z EW LIVE LINE LANYARDS Specifically designed for use when working on high and low voltage lines from an EWP vehicle to resist electrical conductivity. Z RP All double tail lanyards are supplied with E839 lanyard stowage points. 20

21 Z Z Z Z E Z E Z E Z E WRAPBAX tie-back lanyards Available in flat webbing in either single or twin tail variants. Z WB FEATURES est shock absorber in the world 66% smaller* & 40% lighter* Expanded range of connectors for all industry applications and demands Lightest & strongest connector combinations on the market REPEL Technology webbing Shock absorber includes HI-10 high tenacity fiber energy management material Protected labels i-safe enabled All new triple action snap & scaffold hooks 16kN gate strength on all hooks/karabiners *Compared to Previous FORCE2 models Adjustable lanyards Available in single or twin tail variants. Z R Cut resistant lanyards Available in either single or twin tail adjustable variants Z CR All DBI-SALA FORCE2 shock absorbing lanyards are available in either single or double tail configurations constructed from webbing, wire or rope in a variety of styles (elasticated, non-elasticated, adjustable and tie-back), and are available with a wide combination of hook & karabiner terminations to suit your specific needs and applications. Contact us for more information. WELDERS LANYARDS High temperature lanyards constructed from Nomex /Kevlar fibre webbing, ideal if you are welding, cutting or grinding, or in a potentially explosive or high-voltage electrical environment. RESIST LANYARD Coated with an extruded polyurethane coating to provide superior protection against grease, oil, paint, dirt and grime; ideal for use in the petrochemical and painting industries. Z NKE Z Nomex and Kevlar are registered trademarks of E.I. du Pont de Nemours and Company If a dorsal extension is part of your harness the maximum lanyard assembly permitted is 1.7m or less. AUS: NZ:

22 C CONNECTORS Single or twin leg harness interface connector, cab mount or karabiner 360 swiveling anchorage loop Impact-resistant housing Automatic quick-activating arrestor Impact indicator Retractable lifeline equipped Triple action karabiner, snap or scaffold hook with 16kN gate strength m single webbing lifeline with quick connector anchorage connection and steel snap hook available with stainless steel or swivel snap hook 1.8m single webbing lifeline with quick connector anchorage connection and aluminium scaffold hook Also available: with steel scaffold hook 1.8m single webbing lifeline with cab mount anchorage connection and steel swivel snap hook Single webbing lifeline with steel triple action karabiners Also available: with stainless steel triple action karabiners 1.8m single webbing lifeline with steel triple action karabiner connection and steel scaffold hook on lifeline Also available: with stainless steel triple action karabiner and aluminium scaffold hook 1.8m single webbing lifeline with quick connector anchorage connection and steel triple action karabiner Also available: with stainless steel triple action karabiner 1.8m twin webbing lifelines with quick connector anchorage connection and two steel scaffold hooks Also available: with aluminium scaffold hook COMPACT. Ergonomically designed - virtually unnoticeable on your back VERSATILE. Choose from a range of single or twin leg configurations and harness/lifeline connectors. SAFE. Stops a fall within centimetres, providing greater protection at low heights

23 LE SELF RETRACTING LIFELINES DESIGNED FOR SHARP EDGE APPLICATIONS EASY-TO-INSTALL CONNECTOR TOUGH AND FLEXIBLE WEBBING OR GALVANISED CABLE LIFELINES INTEGRATED, BACKPACK-STYLE ENERGY ABSORBER IMPACT-RESISTANT HOUSING SHARP EDGE ICON HOOK OR KARABINER OPTIONS m single webbing lifeline, steel triple action karabiner 2.4m single webbing lifeline, steel snap hook 2.4m single webbing lifeline, aluminium scaffold hook 2.4m single cable lifeline, steel snap hook 2.4m twin webbing lifelines, steel triple action karabiners 2.4m twin webbing lifelines, aluminium scaffold hooks 2.4m twin cable lifelines, aluminium scaffold hooks Scan the QR Code to view our NANO-LOK LE range and support materials. Alternatively visit: or contact us for more information i-safe INTELLIGENT SAFETY SYSTEM i-safe enabled to track inspections, control inventory and manage information. AUS: NZ:

24 C CONNECTORS DESIGNED FOR HOT WORK USE THE FIRST EVER SRL DESIGNED FOR WELDING, GRINDING AND HIGH HEAT APPLICATIONS. Reinforced webbing lifelines constructed from Nomex /Kevlar fibre webbing to withstand sparks, weld splatter and other high heat exposure m single Nomex /Kevlar fibre webbing lifeline with steel snap hook, karabiner harness connector 1.8m, single Nomex /Kevlar fibre webbing lifeline with steel scaffold hook, quick connector for direct harness mounting 1.8m, twin Nomex /Kevlar fibre webbing lifelines with with steel scaffold hooks, quick connector for direct harness mounting Nomex and Kevlar are registered trademarks of E.I. du Pont de Nemours and Company SELF RETRACTING LIFELINES (SRL S) TALON SRL S A light, strong, safe and compact SRL s with built-in connector for direct attachment to harness m webbing lifeline with quick-connect mount handle and snap hook 2.4m webbing lifeline with quick-connect mount handle and swivel snap hook 2.4m, with stock picker cab mount bracket and snap hook 4.8m webbing lifeline, with swivel mount and snap hook 1.8m webbing lifeline, twin tail, with scaffold hooks, comfort back pad and lanyard keepers Talon Ultra-Lok RSQ ULTRA-LOK SRL S Rugged, lightweight and superbly engineered. The professional s choice m webbing lifeline Also available: 6m 10m galvanised cable lifeline Also available: 6m and 15m with either triple action Karabiners ideal for use in mining or swivel snap hook Ultra-Lok TM RSQ SRL 15m stainless steel cable lifeline and swivel snap hook, dual mode SRL s with rescue function (assisted rescue tool and First-Man-Up TM pole available separately if required) Ultra-Lok Impact indicating snap hooks and karabiners provide a visual indication of fall arrest. Available on all DBI-SALA Ultra-Lok and Sealed cable lifeline SRL s models, and select Talon and Nano-Lok webbing SRL s. KARABINERS AJ514 R-105-S R-105-S-CE AJ593 Double action, auto-lock, 16mm opening Double action, screw gate, 18mm opening Double action, screw gate, 18mm gate opening with captive eye Double action, auto-lock, 50mm opening AJ514 R-105-S R-105-S-CE AJ593 HOOKS AJ592 Double action, snap hook, 19mm gate opening Double action, scaffold hook, 61mm opening Double action, anchor hook, 89mm opening (Sold seperately) *This scaffold hook is manufactured to be permanently attached to spliced or webbing lanyards and other height safety products and is not sold separately * 07153* AJ592 24

25 SEALED BLOK SRL S Sealed design makes it ideal for working in even the harshest of environments. All Sealed Blok Self Retracting Lifelines feature and ergonomic integral carrying handle and anchorage karabiner m galvanised cable lifeline with swivel snap hook m stainless steel cable lifeline with stainless steel swivel snap hook m galvanised cable lifeline with swivel triple action karabiner (formely ) 15m galvanised cable lifeline with swivel snap hook (formerly ) 15m stainless steel cable lifeline with stainless steel swivel snap hook (formerly ) 25m galvanised cable lifeline with swivel snap hook (formerly ) 25m stainless steel cable lifeline with stainless steel swivel snap hook (formerly ) 40m galvanised cable lifeline with swivel snap hook (formerly ) 40m stainless steel cable lifeline with stainless steel swivel snap hook LOAD ARRESTORS m of galvanised cable, 300kg load rating 8m of galvanised cable, 400kg load rating 5m of galvanised cable, 500kg load rating 4m of galvanised cable, 800kg load rating SRL S ACCESSORIES Z Shock absorbing unit for leading edge work Power Tagline System. Provides remote access to overhead mounted SRL s Z6 SRL and Beam Trolley not included ROPE GRABS & LIFELINES AC202 AC3000/10 AC400 AC415AU AC415MAU AC415MBAU Cobra Rope Grab - suits 12-14mm 3 strand rope only (horizontal/vertical work) 10m Cabloc Vertical Lifeline Kit Also available: AC3000/20 (20m), AC3000/30 (30m) Viper Rope Grab - suits 11-13mm kernmantle rope only (horizontal work) 15m system, 11mm kernmantle rope lifeline, karabiner, sewn thimbled eye and sewn end stop Also available: AC420AU (20m) system, AC425AU (25m) system, AC430AU (30m) system 15m system, 11mm kernmantle rope lifeline assembly system with integral manual rope grab, karabiner, sewn thimbled eye and sewn end stop Also available: AC420MAU (20m) system, AC430MAU (30m) system 15m system, 11mm kernmantle rope lifeline assembly system with integral manual rope grab and shock absorbing lanyard, karabiners, sewn thimbled eye and sewn end stop Also available: AC420MBAU (20m) system, AC430MBAU (30m) system AC202 AC415MBAU AC400 AUS: NZ:

26 C CONNECTORS REBEL SELF RETRACTING LIFELINES Thermoplastic Housing Lightweight, compact and durable or Aluminium Housing Provides exceptional strength and durability Top Swivel Limits lifeline twisting 140kg Capacity Higher capacity for operator and tools All Rebel Self Retracting Lifelines come complete with connecting karabiners on housing: Stackable Housing design allows for stacking on work surfaces Side Cable Exit Enables smooth operation and reduces cable wear All Rebel SRL s Mining Specific models feature triple action karabiners on anchorage and lifeline connectors Galvanised and SS Cable Stainless steel option for added corrosion resistance Ergonomic Cable Handle Provides added comfort and ease-of-use when making connections Ergonomic Carrying Handle Built-in design makes transport, set-up and storage easy Self Locking Snap Hook Automatically closes and locks for added safety Models with triple action karabiners also available Impact Indicator Provides visual indication of fall arrest Swivel Hook Limits lifeline twisting AD111R kN Gate Capacity Reduces chance of accidental disengagement ( roll-out ) AD111ARA AD111R AD120BR Rebel Compact Self Retracting Lifelines complete with connecting karabiner on housing 3.3m, webbing 3.3m, webbing, triple action karabiners 4.5m, cable (ideal for hot work) 6m, webbing Rebel Self Retracting Lifelines complete with connecting karabiner on housing and swiveling fall indicator snap hook 6m, galvanised cable, thermoplastic housing 10m, galvanised cable, thermoplastic housing 15m, galvanised cable, thermoplastic housing 20m, galvanised cable, thermoplastic housing 30m, galvanised cable, thermoplastic housing Also available: with stainless steel cable and aluminium housing. Mine spec models also available featuring triple action karabiners on housing and swivel impact indicating karabiners on lifeline Also available. See page

27 SHOCK ABSORBING LANYARDS HD160kg AE529/3AU AE529/13AU AE529/25AU AE529E/3AU AE529EY/5AU AE529Y/5AU AE529ADJ/3AU PRO Lanyards Single tail, 2 x snap hooks, 2.0m Single tail, 2 x snap hooks, 1.5m Single tail, 1 x snap hook, 1 x karabiner, 1.0m Single tail, elasticated, 2 x snap hooks, 2.0m Double tail, elasticated, 1 x snap hook, 2 x scaffold hooks, 2.0m Double tail, 1 x snap hook, 2 x scaffold hooks, 2.0m Single tail, adjustable, 2 x snap hooks, m AE529EY/5AU PRO WELDERS LANYARDS HIGH TEMPERATURE LANYARDS - Ideal for use during welding, cutting, electrical maintenance and other high temperature Hot Work applications. AE529ADJ/3AU AE529/3W AE529/5W AE529/9W AE529Y/3W AE529Y/5W AE529Y/9W Single tail, Kevlar fibre webbing, 2.0m overall length with snap hooks on both ends Single tail, Kevlar fibre webbing, 2.0m overall length with snap hook and scaffold hook on tail Single tail, Kevlar fibre webbing, 2.0m overall length with triple action karabiners on both ends Double tail, Kevlar fibre webbing, 2.0m overall length with snap hooks on all ends Double tail, Kevlar fibre webbing, 2.0m overall length with snap hook and scaffold hooks on tails Double tail, Kevlar fibre webbing, 2.0m overall length with triple action karabiners on all ends AE529/3W Kevlar is a registered trademark of E.I. du Pont de Nemours and Company AE529/9W AE529/5W AE529Y/3W AE529Y/5W AE529Y/5W AE529FAU FIRST Lanyard Single Tail, 2.0m,with screw gate captive eye karabiners on both ends AE529FAU All double tail lanyards are supplied with E839 Lanyard Stowage Points. POLE STRAP AF725AU 2.5m with adjuster, snap hooks & protective sleeve AF725AU AUS: NZ:

28 D DESCENT & RESCUE TRIPODS m, aluminium, square legs 2.7m, aluminium, square legs Tripod Accessories Snatch block, eye bolt pulley assembly Leg mount pulley bracket Note: Tripods come standard with integral pulley system and one quick connect winch/srl mounting bracket. EMERGENCY RETRIEVAL SEALED BLOK SRL S Sealed design makes it ideal for working in even the harshest of environments. All Emergency Retrieval Sealed Blok Self Retracting Lifelines feature and ergonomic integral carrying handle and anchorage karabiner (formerly ) (formerly ) (formerly ) (formerly ) (formerly ) (formerly ) m galvanised cable lifeline with swivel snap hook 15m stainless steel cable lifeline with stainless steel swivel snap hook and RSQ feature 25m galvanised cable lifeline with swivel snap hook 25m stainless steel cable lifeline with stainless steel swivel snap 40m galvanised cable lifeline with swivel snap hook 40m stainless steel cable lifeline with stainless steel swivel snap hook Emergency Retrieval Sealed SRL Accessories Mounting Bracket to fit Sealed Blok Retrieval SRL s to tripod leg WINCHES Salalift II Winch 18m, 6mm galvanised cable 27m, 5mm galvanised cable 36m, 5mm galvanised cable Also available: stainless steel cable models Advanced Digital Winches 18m, 5mm galvanised cable 27m, 5mm galvanised cable 58m, 5mm galvanised cable Also available: stainless steel cable and Technora rope models Advanced Basic Winches 15m galvanised cable 15m galvanised cable A WIDE RANGE OF ADVANCED WINCHES AND ACCESSORIES ARE AVAILABLE. CONTACT US FOR FULL DETAILS RETRIEVAL SRL S HITCH MOUNT Portable, temporary anchorage point for use with DBI-SALA winches & SRL s BOSUNS CHAIR/SPREADER BAR E822 E821 E823 E522-SB1 0.6m bosuns chair (height from seat to D-ring) 1.2m bosuns chair (height from seat to D-ring) 1.2m bosuns chair with spreader bar Spreader bar with karabiner connections E822 E522-SB1 28

29 DBI-SALA ADVANCED PFAS (PORTABLE FALL ARREST SYSTEM) For use on top of transformers or other types of platforms with potential fall hazards. A range of mounting bases are available for multiple applications as well as a detachable davit arm for use in rescue Portable Fall Arrest System Rescue Davit Arm Note: Mechanical devices and attachments sold separately. DBI-SALA ADVANCED 5-PIECE HOIST SYSTEM Designed for manhole and confined space entry/retrieval applications. The Davit pivots for ease of rescue and has an adjustment for overhead clearance restrictions. The lower base adjusts to fit most standard entries. A range of bases and masts are available Includes adjustable offset mast, lightweight lower mast and 3-piece lightweight base Also available: multiple size component configurations Note: Mechanical devices and attachments sold separately. DBI-SALA ADVANCED SIDE ENTRY SYSTEM Designed for confined space entry/retrieval and rescue operations involving horizontal entries with vertical positioning or retrieval required inside the space Side entry system package for use with external adjustment tank collar or permanently mounted bases External adjustable tank collar Note: Mechanical devices and attachments sold separately. DBI-SALA ADVANCED BASES AND MOUNTING OPTIONS DBI-SALA Advanced portable and Fixed bases work with a variety of davit arm and mast extensions to suit a variety of applications. Fixed Bases are ideal for work areas where frequent set-up and tear-down is required and a base can be permanently installed to an existing structure. Portable Bases are ideal when you need to move and access various confined space areas Fixed Bases Wall Mount Sleeve (Stainless Steel) Flush Mount Sleeve (Zinc Plated Steel) Centre Mount Sleeve (Zinc plated Steel) Portable Bases Barrel Mount Sleeve (Zinc plated steel) Manhole Collar (Aluminium) Also available: a wide range of other fixed and portable bases in stainless steel and galvanised steel are also available, contact us for more information, or for assistance in determining the most appropriate base for your needs. For more information on the complete range of DBI-SALA Advanced Confined Space safety systems and options, visit or contact us. AUS: NZ:

30 D DESCENT & RESCUE AG RESCUE SYSTEMS AG R R R P SRD1-20 SRD Rollgliss R250 Rescue Kits All R250 kits include: extension pole, rope & safety hook, mini-haul system, karabiners, anchorage slings and bags 10m system Also available: 20m, 30m and 50m system lengths Heavy duty telescopic pole (for use with Rollgliss Rescue Kits) Rollgliss R350 Rescue System All R350 kits include: rope unit, pulleys, rope control device with integral lanyard, anchor strap, karabiners and carry bag 15m system 30m system 30m system, with pick pole Rollgliss Rescue Ladder 2.4m, includes 3 connecting karabiners Anchorage plate for mounting ladder to a davit arm or anchorage point Rollgliss R520 Rescue & Escape Device Kits 5m system, including R520 twin brake descender, karabiner connector, kernmantle rope, attachment fittings and storage/deployment bag Also available: 5m increments up to 40m and then 10m increments to 100m Rollgliss R520 Rescue & Escape Device - Retrofit Kits 5m retrofit system for use with Bucket Trucks, EWP s or Crane Housings, including R520 twin brake descender, hammerlock connector, kernmantle rope and attachment fittings. Optional storage/deployment box with U bolt, tracer wire and R-clip available separately Also available: 5m increments up to 40m and then 10m increments to 100m Rollgliss R550 Rescue & Escape Device Rescue Kits 10m system, includes R550 twin brake descender, rescue hub with drill adaptor, connecting karabiner on housing, 9mm kernmantle rope with snap hooks on both ends and a storage/deployment bag Also available: 20m, 40m, 60m, 100m, 120m, 150m Rollgliss R550 Rescue & Escape Device Escape Kits 10m system, includes R550 twin brake descender, connecting karabiner on housing, 9mm kernmantle rope with snap hooks on both ends and a storage/ deployment bag Also available: 20m, 40m, 60m, 100m, 120m, 150m Rescue Positioning Device Kits (RPD) All RPD kits include: kernmantle rope,slings, karabiners, gripping handle and storage bag 15m travel, 3:1 ratio Also available: 23m and 30m travel lengths 15m travel, 4:1 ratio Also available: 23m and 30m travel lengths and other ratios Rescumatic Automatic Descent Control Device Includes two rescue restraint straps and rope spool. Note: The Rescumatic system length is determined by the length of the cable. Cable must be ordered separately. Self Rescue Descender System (SRD) All SRD kits include: descender, kernmantle rope, karabiner (SRD1 series), hammerlok with snap hook (SRD2 series), U bolt, storage/deployment box, tracer wire with R-clip, spacer and certification tag 20m system, SRD1 series Also available: 25m and 30m systems 20m system, SRD2 series Also available: 25m and 30m systems Ultra-Lok RSQ 15m dual mode self retracting lifeline with rescue function, stainless steel hook and cable Assisted rescue tool (for use on First-Man-Up TM pole) First-Man-Up TM pole ( m) with assisted rescue tool R SRD

31 PENOGUARD A Better Way To Safeguard Your Workers PenoGuard is a revolutionary safety device that will dramatically increase the safety of workers that need to work around penetrations. In the closed position it serves as a cover for access holes eliminating any risk of falling through, in the open position it acts as a four sided guard rail allowing easy access to the penetration while protecting workers and bystanders around the hole. CONFINED SPACE CIVIL CONSTRUCTION CONFINED SPACE EQUIPMENT ABSB0001AU AM100 AK0100 AT052/ (formerly AD515) AT200/I20 AA600AU AA610AU Confined Space Spreader Bar Retrieval straps with karabiner connections Tripod and Accessories Tripod, 1.35m to 2.35m Tripod bag Pulley with karabiner for use on tripod Fixing bracket for retrieval SRL Rebel Retrieval Self Retracting Lifeline Galvanised cable, 15m* Rescue Winch Automatic locking system, 20m** Confined Space Kits With Personnel Winch, includes: AM100 tripod, AT200/I20 Winch, AK0100 bag, mounting bracket and pulley With Type 3 SRL, includes: AM100 tripod, Type 3 retrieval SRL, AK0100 bag, mounting bracket & pulley * When ordering the Rebel Retrieval Fall Arrest SRL for use with the Tripod, order the AT052/1 pulley and the fixing bracket. ** When ordering the Rescue Winch for use with the Tripod, order the AT052/1 pulley. Alternatively order the complete system, part no. AT200/I20/P AT200/I20 AA610AU AUS: NZ:

32 D DESCENT & RESCUE MADE FOR WORK NOT PLAY TM ROLLGLISS TECHNICAL RESCUE The Rollgliss Technical Rescue product line meets the needs of rescuers for rigging, encompassing everything from simple descent systems to complicated flying foxes. Made in Australia and used around the globe, the Rollgliss Technical Rescue range compliments our already established line of Industrial Rescue systems, including pre-rigged engineered rescue kits like the Rollgliss R350, R550 and more. BODY HARNESSES DELTA SUSPENSION HARNESS Ideal for Rescue and emergency services, industrial rope access, abseiling and tower work. Front, rear, side and abdominal D-rings, quick adjust buckles, padded lower back/hip pad, tool O rings, fully adjustable, REPEL technology webbing Note: Also conforms to AS/NZS & 2 Twin Rope Access Standard EXOFIT NEX SUSPENSION HARNESS WITH CHEST ASCENDER Ideal for the professional ascending working lines Front, rear, side and abdominal Tech-Lite aluminium D-rings, integral chest ascender, Duo-Lok quick-connect buckles, padded lower back/ hip pad, gear loops, non-slip hybrid comfort padding, REPEL technology webbing 883S M L XL4016 Extra 783S M L XL4010 Extra EXOFIT NEX SUSPENSION HARNESS Ideal for the professional performing rescue and emergency services, industrial rope access, abseiling and tower work Front, rear, side and abdominal Tech-Lite aluminium D-rings, Duo-Lok quick-connect buckles, padded lower back/hip pad, gear loops, non-slip hybrid comfort padding, REPEL technology webbing EXOFIT NEX MINES RESCUE HARNESS Ideal for use by mining industry personnel for use with battery packs, self rescuers, and re-breathers Front and abdominal Tech-Lite aluminium D-rings, side aluminium karabiners, integral chest ascender, Duo-Lok quick-connect buckles, sewn-in wide padded miners belt incorporating battery and self rescue straps, gear loops, non-slip hybrid comfort padding, REPEL technology webbing 783S M L XL4016 Extra 783S M L XL4035 Extra 32

33 ANCHORAGES RigMaster Rigging plates Tetra Rigging Plate, large rectangular rigging plate, aluminium, 14 rigging points Deca Rigging Plate, medium oval rigging plate, alumimium, 10 rigging points, with rubber bumper Hexa Rigging Plate, small triangualar rigging plate, aluminium, 6 rigging points Penta Rigging Plate, small paw shape rigging plate, aluminium, 1 large & 4 small rigging points RigMaster Swivels Triangular low profile, aluminium, with bearings - gold Rounded low profile, aluminium, with bearings - black RigMaster Anchor Straps 0.5m round anchor strap, 25mm webbing 1.0m round anchor strap, 25mm webbing 1.5m round anchor strap, 25mm webbing 2.0m round anchor strap, 25mm webbing 3.0m round anchor strap, 25mm webbing CONNECTORS E KF7T E R-105-S-CE R R-113 R Pole Straps RopeCraft trigger pole strap, adjustable up to 1.8m Rope Pole Strap, with lightweight rope grab adjuster Karabiners Oval Karabiner, 18mm gate opening, screw gate, captive eye, steel Oval Karabiner, 19mm gate opening, screw gate, aluminium Offset D Rescue Karabiner, 14mm gate opening, autolock, captive eye, double action, steel Offset D Rescue Karabiner, 18mm gate opening, screw gate, aluminium Offset D Rescue Karabiner, 18mm gate opening, autolock, triple action, aluminium Offset D Fall Arrest Karabiner, 20mm gate opening, autolock, captive eye, double action, steel Offset D Rescue Karabiner, 22mm gate opening, screw gate, aluminium Offset D Fall Arrest Karabiner, 20mm gate opening, autolock, triple action, captive eye, steel, 16kN gate strength Offset D Fall Arrest Karabiner, 20mm gate opening, autolock, triple action, captive eye, stainless steel, 16kN gate strength Offset D Rescue Karabiner, 23mm gate opening, autolock, double action, aluminium Offset D Rescue Karabiner, 27mm gate opening, screw gate, steel Offset D Rescue Karabiner, 27mm gate opening, autolock, triple action, stainless steel Parabiner Fall Arrest Karabiner, 19mm gate opening, autolock, triple action, aluminium, 16kN gate strength Extra Parabiner Fall Arrest Karabiner with Captive Eye, 54mm gate opening, autolock, captive eye, double action, steel, 16kN gate strength Quick Links Delta Style, 7mm gate opening, screw gate, steel Delta Style, 8mm gate opening, screw gate, steel Delta Style, 10mm gate opening, screw gate, steel Oval Style, 8mm gate opening, screw gate, steel D Style, 10mm gate opening, screw gate, steel KF7T R AUS: NZ:

34 D DESCENT & RESCUE DESCENDERS Single Stop Descenders Single rope, single stop descender, anodised red aluminium, suits mm rope Single rope, single stop descender, stainless steel, suits mm rope Double rope, single stop descender, anodised blue aluminium, suits mm rope NoWorries Double Stop Descenders Double stop descender, anodised gold aluminium, suits mm rope Double stop descender, anodised gold/blue aluminium, suits mm rope Double stop descender, stainless steel, suits 10.5 to 12.0mm rope Manual Descenders Goldtail, manual descender, 5 hole, black Goldtail, manual descender, 5 hole, gold Rappel rack, manual descender, 5 bar ASCENDERS ExPlorer Chest Ascenders Retrofit chest ascender, anodised gold aluminium, suits mm rope ExPlorer Hand Ascenders Ergonomic hand ascender, anodised gold aluminium, left handed, suits mm rope Ergonomic hand ascender, anodised gold aluminium, right handed, suits mm rope Ascender Accessories ExPlorer 5-Step Etrier, 1.8m ExPlorer single leg foot loop - adjustable length up to 1.8m max ExPlorer double leg foot loops - adjustable length up to 1.8m max

35 LIFELINES RopeCraft Static Kernmantle Rope Rescue Rope 13mm, yellow with black fleck, per metre 13mm, orange with black fleck, per metre 11mm, navy with orange fleck, per metre 11mm, green with black fleck, per metre 11mm, orange with black fleck, per metre Prusik/Accessory Cord 6mm, red with yellow fleck, per metre 7mm, yellow with black fleck, per metre RopeCraft Pre-Sewn Prusik Loops Personal Prusiks 6mm kernmantle rope, 0.52m loop length, red with yellow fleck 6mm kernmantle rope, 1.2m loop length, red with yellow fleck 6mm kernmantle rope, 0.52m loop length, red with yellow fleck Litter foot end prusik 7mm kernmantle rope, 0.9m loop length, yellow with black fleck 7mm kernmantle rope, 1.7m loop length, yellow with black fleck Technical Rescue Prusiks 8mm kernmantle rope, 0.4m loop length, blue with black fleck 8mm kernmantle rope, 0.54m loop length, blue with black fleck 8mm kernmantle rope, 0.65m loop length, blue with black fleck Rope Finishing Capital Safety offers rope in heat cut custom lengths and pre-finished set lengths: sewn, labeled and thimbled. For lengths and colours contact Capital Safety EDGE PROTECTION RopeCraft Synthetic Rope Potector Wrap around, PVC Wrap around, canvas Wrap around, double canvas RopeCraft Mechanical Rope Protector For man made edges, aluminium For natural surfaces and edges, aluminium For man made & natural surfaces, aluminium AUS: NZ:

36 D DESCENT & RESCUE PULLEYS RescueMate Rigging Pulleys Single sheave, 40mm diameter, suits rope up to 11mm Single sheave, 50mm diameter, suits rope up to 13mm Double sheave, 50mm diameter, suits rope up to 13mm Triple sheave, 50mm diameter, suits rope up to 13mm Single sheave double ended, 50mm diameter, suits rope up to 13mm Double sheave double ended, 50mm diameter, suits rope up to 13mm Triple sheave double ended, 50mm diameter, suits rope up to 13mm Triple sheave double ended, 60mm diameter, suits rope up to 13mm Single Sheave Thick Cheek kg (up to 25mm) Double Sheave Kg (Up To 13Mm) Single Sheave Kg (Up To 13Mm) Triple Sheave Kg (up to 9mm) RescueMate Prusik Minding Pulleys Single sheave, 40mm diameter, suits rope up to 11mm Single sheave, 50mm diameter, suits rope up to 13mm RescueMate Transport Pulleys Knot passing pulley, single wide sheave, 80mm diameter, suits 11-80mm rope Tyrolean Pulley, V style, double inline sheaves, 60mm diameter, suits rope up to 13mm Tyrolean Pulley, T style, double inline sheaves, 80mm diameter, suits rope up to 24mm

37 HAUL KITS LiftingMate Haul Kit 2:1 mechanical advantage, 60m working length 1:1 mechanical advantage, 75m working length RescueMate Micro Haul Kits 6:1 mechanical advantage, 2m working length 6:1 mechanical advantage, 3m working length 6:1 mechanical advantage, 4m working length 6:1 mechanical advantage, 5m working length 6:1 mechanical advantage, 6m working length 6:1 mechanical advantage, 12m working length 6:1 mechanical advantage, 15m working length RescueMate Manual Lock Haul Kits 4:1 mechanical advantage, 10m working length 4:1 mechanical advantage, 20m working length 4:1 mechanical advantage, 30m working length 4:1 mechanical advantage, 60m working length RiggersMate Auto Lock Haul Kits 4:1 mechanical advantage, 5m working length 4:1 mechanical advantage, 10m working length 4:1 mechanical advantage, 15m working length 4:1 mechanical advantage, 20m working length 6:1 mechanical advantage, 10m working length 6:1 mechanical advantage, 14m working length 6:1 mechanical advantage, 20m working length 6:1 mechanical advantage, 40m working length ROPE GRABS Rope-Safe Rope Grab Kernmantle rope grab with 300mm shock absorbing lanyard Kernmantle rope grab with 600mm shock absorbing lanyard Kernmantle rope grab with 900mm shock absorbing lanyard AUS: NZ:

38 D DESCENT & RESCUE CONFINED SPACE RESCUE FRAMES OzPod Rescue Frames Modular rescue frame, complete with winch leg mount bracket and carry bags Carry Bag A Carry Bag B Carry Bag C OzPod stabilising counterweights, 20kg OzPod Tripods m adjustable aluminium tripod, complete with winch leg mount bracket and tripod pulley m adjustable aluminium tripod, complete with winch leg mount bracket and tripod pulley Rescue Frame/Tripod Mounting Bracket Mounting Bracket, to fit SRL/Winch to Ozpod Rescue Frame & Tripod leg Options sold separately: Stabilising Weights Salalift II Winch Swivel Pulley Karabiner Quick Link BAGS Gear Rolls Gear Roll - 7 gear pockets & 10 Krab Hooks (prev ) gear roll, 4 gear pockets & 7 karabiner loops gear roll, 14 gear pockets & 20 karabiner loops Tool Pouches Tool pouch,pvc Tool and equipment bucket, attaches to your harness, belt or lifeline Rope Bags 5L, orange/black, extra small - fits approx. 7m x 11mm rope 25L, yellow, small - fits approx. 50m x 11mm or 25m x 13mm rope 40L, green, medium - fits approx. 100m x 11mm or 50m x 13mm rope 50L, orange, large - fits approx. 200m x 11mm or 100m x 13mm rope 60L, red, extra large - fits approx. 300m x 11mm or 200m x13mm rope Rescue Gear Pack gear Pack, 14 gear pockets, 30 karabiner loops, detachable ground cover First Response Back Pack First responder pack, 1 large main compartment, 2 large side pockets, rear fold out panel with mesh pockets, tie downs and connector points Note: Equipment not included Note: Equipment not included 38

39 ACCESSORIES Miscellaneous Chalk Line, 50m Reel, fishing hand reel Throw Bags Throw bag, 400g Throw bag, 400g, with 50m of cord on reel Spine Splint Oregon Spine Splint Stretchers Sked Basic Rescue System Shell Basket Stretcher Litter Bridles Adjustable Litter Bridle with karabiners Adjustable Litter Bridle with R-108 karabiners Adjustable Litter Bridle with Soft Loops Helmet Pacific Helmet with brim, white Webbing 25mm tubular webbing, black, available per metre 25mm tubular webbing, red, available per metre 25mm tubular webbing, yellow, available per metre Also available in 100mtr rolls DUE TO THE WIDE RANGE OF RESCUE SYSTEMS AVAILABLE AND THE TECHNICAL NATURE OF THESE PRODUCTS AND APPLICATIONS, PLEASE CONTACT US FOR MORE INFORMATION OR TO SPEAK WITH ONE OF OUR TECHNICAL RESCUE SPECIALISTS. AUS: NZ:

40 SPECIALITY SYSTEMS FLEXIGUARD ACCESS SYSTEMS C-FRAME RAIL FALL ARREST SYSTEM A versatile system designed to be moved manually or with the use of a tow bar and service vehicle to provide safe access, horizontal movement and total fall protection on or near sensitive equipment for up to two users A-FRAME RAIL FALL ARREST SYSTEM A secure anchor point in a portable structure giving the worker increased coverage and protection. Depending on the configuration, this system has the capacity to provide fall protection for multiple workers and can be easily moved from job site to job site. BOXED-FRAME RAIL FALL ARREST SYSTEM Provides a convenient means of securing a fall arrest rigid rail in areas with limited space or inadequate overhead structure for multiple users. These frames can be custom built to accommodate a specific area or piece of equipment. These units can be designed as a permanent or portable frame, allowing for easy relocation throughout a facility. COUNTERWEIGHT RAIL FALL ARREST SYSTEM Designed as a versatile solution to provide an overhead anchor point for up to two users while working at heights. These systems are designed to be counterbalanced by concrete or other means allowing for close positioning to the work surface without obstructing the equipment being accessed. View our FlexiGuard Access Systems Catalogue for more information on the complete range of access Systems. Due to the technical nature of all these speciality systems and applications, a degree of customisation is required. Please contact Capital Safety for more information. i-safe INTELLIGENT SAFETY SYSTEM 3.1 MOBILE VERSION! The most advanced way to track safety equipment and manage your safety inspection program - i-safe 3.1. Contact us today to set up your FREE i-safe inspection tool. Let us demonstrate how it can save you time, money and make your safety program even more effective. 40

41 LADDER FALL ARREST SYSTEM Provides easy access to elevated work areas such as fuselage, wing and general maintenance areas with 100% fall protection from the ground up for up to three users, for the duration of the work being performed. PORTABLE TANKER ACCESS LADDER SYSTEM - FALL ARREST The Portable Tanker Access Ladder System (PTALS) provides easy access to elevated work areas with 100% fall arrest rated tie-off for one operator from the ground up for the duration of the work being performed. System configurations may include but not limited to guardrails, SRL s or confined space entry equipment. COUNTERWEIGHT JIB The Counterweighted Jib is a portable solution for indoor and outdoor maintenance where mobility and worker safety are key. These systems incorporate a 360 rotating jib with the capacity to provide fall protection for one person. Forklift pockets are located on all four sides of the base as well as lifting rings to ensure ease of mobility and placement from job site to job site. PORTABLE TANKER ACCESS LADDER SYSTEM - WORK POSITIONING The Portable Tanker Access Ladder System (PTALS) combines easy access to elevated work areas with 100% fall protection and work positioning for one operator for the duration of the work being performed. System configurations may include but not limited to guardrails or confined space entry equipment. LADDER LEVELLING / STABILISING RANGE Engineered to enhance ladder safety by eliminating accidents caused by improper use. The ladder levelling/stability range converts your ladder into a safer access system ideal for use in a range of industries and applications. STOPPER The Stopper is an anti-slip ladder stabiliser consisting of a high quality aluminium T-piece bonded to a covering of vulcanised rubber. L461 Anti Slip Ladder Stabiliser LEVELLERS These devices fit to the bottom of a ladder to allow it to be precisely levelled on hills and slopes, providing a safe grip on any surface at multiple angles L462 L463 Ladder Leveller Permanent Fit Ladder Leveller Temporary Fit SPYDER The Spyder device can be fitted securely to any industrial ladder by means of its unique patented clamping system, improving overall ladder stability. L460 Top Ladder Stabiliser/Work Station Note: Ladder not included AUS: NZ:

42 SPECIALITY SYSTEMS DBI-SALA ENGINEERED SYSTEMS Capital Safety s range of engineered horizontal systems provide a choice of fall protection solutions that allow users to most effectively resolve the risks associated with work at height in a wide range of applications, and comply with workplace safety regulations. ROOFSAFE ANCHOR AND CABLE SYSTEM The system attaches to roof sheeting and can span up to 12m between supports to provide continuous hands-free access and protection. ROOFSAFE RAIL SYSTEM The only direct to roof rail system that can facilitate changes in direction and roof slopes, ensuring continuous safe roof access for fall arrest and rope / suspended access applications. UNI-8 / EVOLUTION SYSTEM This system attaches to the structure and is well suited to modern building projects and a wide range of industrial safety applications. UNIRAIL SYSTEM Can be fitted to a wide range of structures and can support multiple workers for both fall arrest and rope / suspended access applications. THE UNI-8 OVERHEAD / EVOLUTION SYSTEM This quality safety solution can support heavy fall arrest and controlled rate descent devices, ensuring free and unhindered movement for the worker when carrying out work at height. UNI 16 SYSTEM The Uni 16 system can be fitted to many types of structures and is perfect for special projects, refurbishments and a wide range of industrial safety applications. Supports multiple workers for both fall arrest and restraint technique applications. Contact us for more information or to speak with one of our Systems Specialists NETTING SYSTEMS ADJUST-A-NET Designed to be easily adjustable to fit any work space where personal fall protection or debris capturing is required. PERIMETER NET A lightweight system for rigging nets around the perimeter of new concrete buildings. DEBRIS CONTAINMENT SYSTEM Light duty netting system for containing debris under conveyors, bridges, aquaducts or any structure traversing trafficable areas. BACK OF RACK NETTING Designed to provide solutions to racking applications to solve material containment issues protecting both employees and products. A wide range of netting solutions are available, contact us for more information or to speak with one of our Netting Specialists. 42

43 ACCESSORIES AK145 Lanyard cover E810-DUAL Yoke harness extension, dual, for rescue E810-SINGLE Yoke harness extension, single, for rescue E814 Tool Lanyard, with tool clip and wrist choker loop E815 Tool Lanyard, with tool choker loop and velcro wrist fastener Tool Lanyard, elasticated with choker tool loop and karabiner harness/belt attachment Tool Lanyard, elasticated with karabiner connectors on both ends Tool Lanyard, elasticated with screw gate karabiner connectors on both end Tool Lanyard - twin leg, elasticated with screw gate karabiner connectors on both ends E831 Dorsal extension, retrofit Utility Tool Bucket E838 Utility Tool Pouch - 2 Pocket Utility Tool Pouch - 11 Pocket Utility Tool Pouch - 15 Pocket E839 Lanyard stowage points Derrick belt, for use with ExoFit NEX Derrickmans harness Suspension seat, for use with ExoFit NEX climbing, Sit and Derrickmans harness Suspension Seat, for use with any brand/style of harness Dorsal webbing protector Harness hydration system Mesh harness laundry wash bag Water bottle holder Safety glasses pouch Mobile phone pouch Suspension trauma straps DELTA comfort back pad CL002 Custom harness labels G Harness storage bag G Harness Storage Duffel Bag G029-NEX Harness Storage Backpack Equipment Duffel Bag, Equipment Duffel Bag, Standard Equipment/kit storage bag, standard G029-3 Equipment/kit storage bag, large E Tool not included E Tool not included Tool not included Tool not included E CL G G029-NEX G Also available. ROLLGLISS ROPE BAGS See page 31. Bumper Cable Tag Soft Goods Tag Hard Goods Tag i-safe retrofit tags are also available for use on all brands of harnesses, lanyards, self-retracting lifelines or other equipment such as gas detectors, tools, ladders & fire extinguishers that require inspection. ACCESSORIES AK043 AK066AU-BKP G029-PRO E839 Duffel bag, 300mm x 500mm Roofers kit backpack Harness storage bag Lanyard stowage points AK043 GO29-PRO AK066AU-BKP AUS: NZ:

44 EDUCATION & RESOURCES CAPITAL SAFETY RESOURCE CENTRE APP Download our FREE Comprehensive ecataloge in the Capital Safety Resource Centre from your app store Simply scan this QR code or search for CAPITAL SAFETY RESOURCE CENTRE in your app store. SEARCH FOR Capital Safety Resource Centre in your app store Visit our brand new website featuring a cleaner and easier to navigate layout and look, with enhanced product details including: specifications, literature, technical bulletins, manuals, videos and more, all at your fingertips: We offer complimentary seminars using our fleet of Mobile Demonstration Units fitted with the latest fall protection equipment and systems. Contact us on: (AUS) or (NZ) SEE IT NOW ON FALL PROTECTION TV 44

45 Inspection Equipment Report S ), Y SYSTEMS GR A BS), GRA PE GRABS (ROPE TEMPORAR ARRES TORS I R IETARY OPR TYPE 1 FALL AND PROPR NES LIFELI NES L IN FEL LIFELI VERTIC AL HORIZ ONTAL TEMPO RARY NOTE : Equipment Inspection Report HWHFW G DELOLW\ WR G H[SHUWLVH DQ DOL FDWLRQV H WUDLQLQJ TX LWHPV WRU KDYLQJ WK VHUYLFHDEOH PHQW,QVSHF QVXULQJ RQO\ DIHW\ (TX 6DIHW\ (TXLS HTXLSPHQW H E\ D +HLJKW LQVSHFW WKH DUH IRU XVH Standard QW,QVSHFWRU D 7KHVH IRUPV safety equipment. ew Zealand HW\ (TXLSPH this form. H +HLJKW 6 H +HLJKW 6DI with Australian/N faults in height on how to complete LQJ WR KHOS WK in accordance instru W\ RIIHUV WUDLQ des instruction equipment E &DSLWDO 6DIH use. This training includes be kept for items of k for shall are offered ice history records/serv c) Maintenance (2009) AS/NZS TYPE 2 AND 3 FALL ARRESTORS PAGE - 2 AND RETRACTABLE HORIZONTAL LIFELINES Labels Item Description DOM # / Lot # DD MM MM DD YY Date Id # Company NO COMMENTS Serial # Broken wires Separation of strands tic Device Automa UV damage NO MMENT COM COMMENTS COMMENTS Distortion Knots Abraded wires NO Bird caging COMMENTS Grease / grime Shock Absorber Paint Damaged restriction Discolouration Operates without rope properly Mould Locks onto and cleanly Missing or damaged stitch Cuts / tears/ abrasions Deployed / stretched / elongated Internal wear parts / screws Permanent marking Missingon load bearing webbing parts operate All moving Heat damage without /glazingrestriction patterns Corrosion /sharp edges Burrs /cracks n Unusual discolouratio NO Corrosion Frays matches rope Vertical lifeline r manufacture grab as per Up arrow legible correctly Springs operating COMMENTS Missing / damaged thimble Loose termination Burns General NO Kinked YY Cuts/ tears/ holes nufacturer Manufacture # Type 1 Wire Rope Heat damage Withdrawl Factory Order Webbing el # Model COMMENTS YY DD MM Legible Company Photograph NO User Date In Service Present and attached tion / Site Location Plastic cover missing Holes /burns UV damage / fading Abrasions Excessive soiling Deformation Connectors properly Additional Comments: and Rollers Bolts functioning Rivets, Manual Device NO Unit operates restriction NO COMMENTS Corroded COM COMMENTS Missing Loose / bent onto rope Unit is locked unless opened Does not move Excess dirt / grease without Final Appraisal ACTION TO BE TAKEN OVERALL PASS OR FAIL Select one only Select one only Clean and Re-Inspect Return to Service 5HWXUQ WR 0DQXIDFWXUHU IRU &ODUL FDWLRQ pe ts: exper ction exp UHVFXH X fall prote QGX LQ H LQGXVWULDO SDFH height safety Remove from Service Pass or Fail P DX VDIHW\ FR FRQ QHG V 6 Inspector s Name Z FDSLWDO 1= ZZ $8 s: uires enquires: For further Download the latest Equipment Inspection Checklists FREE from: Inspector s Signature Inspection Date (click on the Safety Resources tab) fall protection experts: height safety FRQ QHG VSDFH LQGXVWULDO UHVFXH For further enquires: $86 1= ZZZ FDSLWDOVDIHW\ FRP DX CLEARANCE CALCULATION CHARTS To determine the required Fall Clearance add the appropriate factors together, this will give you the safe Required Distance (RD) below the working surface for work which is to be carried out where there is any risk of falling. Self IN N PE T N & Retracting MAINTENANCE OF FALL Lifeline PROTECTION PRO PR OTECTION EQUIPMENT Shock S Absorbing A Lanyard L INSPECTION INSPE E & MAINTENANCE As per Capital Capit Safety and AS/NZS , fall protection equipment users must carry out a full inspection on their gear gea before and after each use to ensure that the items are in good working order. Items Inspection frequency (Note 1) Anchorage An Personal equipm equipment including harnesses, lanyards, connectors, devices including common fall-arrest device use devices FFD + DD + C RD Lanyard assemblies & pole straps Type 1 fall-arrest devices including anchorage line Type 2/3 fall-arrest devices Mobile attachment devices Fixed anchorages, horizontal life lines & life rails Force An attachment point on the rear or front Measured terms- in Newtons (N). The Manufacturer s batch number of in technical Serial or identifying in Newtons (N) the harness whichnumber allows for the connection weight of something iscalculated Year of manufacture of other components of a fall protection/ by multiplying itsmass in Kilograms (kg) by the Details of recommended connection to belts or harnesses system such as a lifeline or value of Gravity, which is 9.81 (m/s2). A Kilogram positioning Type of anchorage line to be used (kg) is a unit of mass (i.e.the weightof a static deceleration device. Suitability & limitation on various usages object). Date of purchase Force = Mass x Acceleration. Date first placed into service Any device which utilises an energy absorption For rough calculation purposes: 1000N = 1kN, component toofminimise the impact of Date & details inspection & services the 1kN = 100kg, 10kN = 1000kg. force created during a fall on the body, Clause 9.3.4(b) shouldorbe kept for each piece of fall protection equipment. The above table, which is found Harness such Records as a lanyard self retracting lifeline. Clause DD + C RD Clause 9.7 Deceleration Device Clause Clause Up to 5-yearly service if recommended by the manufacturer. ArrestingCapital Force Safety recommends: Type 1 - yearly, sealed type 2 and Fall-arrest devic devices full service type 3-2 yearly, unsealed type 2 and type 3 - yearly. The force imposed upon the worker and Capital Safety recommends: 5-yearly inspection for systems by a Capital accredited installer, the point thesafety moment theall other fall th anchorageinstalled systems - yearly. system stops the fall. It is measured 6-monthly inspection by a Height Safety Equipment Inspector 3). in kilo newtons(note(kn), a maximum of 6kN Inspection by a Height Safety Equipment Inspector on entry or al allowable. re-entry into service. 500 mm is 600 mm 900 mm Clause in AS/NZS , Section 9, details the information that should be recorded and made available to (Full Body Harness) Dorsal Extension operators, users of the equipment and regulators as required. Fall protection equipment plays a vital A per webbing is worn by the user As AS/NZSassembly , DDthat can be A device that connects to the rear D-ring of role in working safely at height. to distribute the arresting forces throughout estimated at 700mm. 250mm must be your harness thatbeenables easier connections It must maintained so that it is kept in a usable condition through inspection andthe harness is the body ainregular the event of a fall. to lanyards maintenance and other devices by extending the added for D-Ring slide. regime. Capital Safety recommends that all fall protection equipment shouldpoints be stored in equipped with attachment to connect reach from athe rearcool, D-ring. clean, dry location away from direct sunlight, chemical or corrosive fumes. Care should be taken it to other components of a personal fall arrest to store the equipment on the ground. system. Double ornottriple Action Device Clauses & 9.7 Clause 9.4 Inspection by a Height Safety Equipment Inspector before further use (Note 3). Connector Con Clause 9.5 A device used to join together components NOTES: 1. Man Manufacturer s or supplier s recommendations where provided, take precedence over the frequencies listed. Where used in harsh conditions, more frequent iinspection may be required. 2. If the user or operator of the equipment is not competent to carry out this inspection it is to be undertaken option. These measures, in order, are: identification, open them. AS/NZS defines a Competent Person as: elimination, substitution and isolation. If these HEIGHT SAFETY INDUSTRIAL RESCUE person who has, through a combination of CONFINED training, education and SPACE experience, acquired knowledge and skills enabling that person are not practical, fall protection equipment must Fall ArresttoA Systems correctly perform a specified task. be used. Systems thatcompetent protectperson the Classifications: worker after a fall from Height Safety Operator - A person who is able to perform harness based work at heights under the direct supervision of a height 2 hitting the ground and/or obstructions below AS/NZS defines a Competent Person AS/N safety supervisor. Horizontal Lifeline (HLL) / Rail the work platform. Passive systems little Height Safety Equipment Inspector -require A person who is competent in the skills needed to detect faults in height safety equipment and to as: Amust person who has, through a combination requirements be followed according to the standard, or the manufacturer s user Inspection frequency fr determine remedial action. from the worker. System or no personal involvement of may ttraining, education and experience, recommend more frequent inspection andacquired recertification if the product is instructions. The manufacturer Height Safety Manager - A person who is competent in the selection, design, manufacture or installation of height safety systems or A flexible line supported by two or more Active systems require the worker oftocontrol actively use equipment, or the development measures or work practices. know knowledge and skills enabling that person to or rugged use. exposed to a harsh environment anchorages, to which workers can connect a the system in order for it to be effective. It is corr correctly perform a specified task. lanyard or SRL and travel safely along the line not always practical, cost effective or possible Competent Person Classifications Com length. HLL s can be designed for total restraint to employ passive systems. In these cases, a Height Safety Operator - A person who is able to Heig or fall arrest. Personal Fall Arrest System is required. perform harness based work at heights under the perf Karabiner Fall Indicator direct supervision of a height safety supervisor dire A connector with a self-closing gate that can A visual indicator that shows the fall arrest system or Height Safety Equipment Inspector - A person who Heig be manually locked orindustrial that automatically device has been used to arrest a fall. HEIGHT SAFETY CONFINED SPACE RESCUE competent in the skills needed to detect faults is co locks, and is used to attach to a fall protection A height safety equipment and to determine in h Fall Prevention component. Can be double action or triple Environment ent Health & Safety AUS: NZ: IS AS 4801 remedial action. rem Refers to the systems and techniques that eliminate action. the possibility of a fall to a lower level. The most Height Safety Manager - A person who is competent Heig Lanyard Assembly/Shock-Absorbing desirable method of fall prevention is to engineer in the selection, design, manufacture or out or modify the work plan to eliminate the hazard. Lanyard installation of height safety systems or equipment, inst Equipment Before & After Use Winches, Sala Salalift I & II, Advanced Servicemanually Period Equipment Inspector pr Rescue Positioning Positio Devices (RPD s) 2 Year 1 Year Rescue and Rescumatic Re Descent Devices 212 Competent Person AUS: Controlled 002 Com NZ: Year Tripod, Davit A Arms, Support Structures 1 Year ANCHORAGE GLOBAL LEADER IN FALL PROTECTION BODY SUPPORT the development of control measures or work or th 1. Inspect the practices. prac A line of rope, webbing or cable incorporating Protection harnessfall before Harnesses should be inspected for felt pen markings on load bearing webbing, cuts, burns, discolouration, excess dirt or wear, knots, other damage and activation of the impact indicator where applicable (Fig. A). All labels must be present. Hardware such as D-rings, snaphooks and buckles should be free of cracks, Environ Environment IS Health & Safety AS a shock absorber and connectors at each end Refers to the overall industry and process of B protecting workers at height. use All fall protection equipment should be inspected by the user prior to and after each use. A detailed inspection should also be performed by a Height safety Equipment Inspector every six months as per AS/NZS GLOBAL LEADER IN FALL PROTECTION Quality uality IS C corrosion, burrs, 212 missing505 parts, or other AUS: deformation, NZ: 0800 damage and/or wear. (Fig. B & C) If there is ever any sign of an unsafe condition or if the harness shows signs that it has been used to arrest a fall it should be immediately withdrawn from service & destroyed. CROSS-OVER STYLE Quality IS DESCENT/ RESCUE to connect the harness to the anchor device. 2. Getting Started Pass-Thru Buckle Quick-Connect Buckle Insert 002 male portion into AUS: NZ: receptor until click is Environ IS0 14 heard. Pull free end of web to tighten. Pass male buckle through female buckle and pull free end of webbing to tighten. Revolver Vertical Torso Adjusters Duo-Lok Quick Connect Buckles Turn Ratchet Knob clockwise to tighten. To loosen, pull Ratchet Knob out and turn counterclockwise while pulling strap. Connect buckle ends by inserting the tab into the receptor until a click is heard. To adjust strap, rotate Webbing Lock to unlocked position. Pull strap to adjust. Rotate Webbing Lock to locked position. Note: After adjustment, ensure that the ramped teeth on the adjuster are engaged in the ratchet slots Environment ment IS Health & Safety S AS 4801 A webbing device that is designed to tear or extend, to reduce the forces on the worker in the event of a fall to less than 6kN. Vertical Lifeline System A flexible line rigged from one or more anchors to which a worker can secure the components of their fall protection system in a vertical orientation. These systems provide freedom of movement whilst maintaining user protection from a fall from height. Snap Hook A connector with a hook shaped body that has an opening for attachment to a fall protection component and a self closing gate to retain the component within the opening. Hooks must be double-acting to be compliant. Work Positioning CONNECTOR Sub-Pelvic Strap A strap incorporated into a full body harness which passes under the buttocks connecting the two leg loops. It is designed to distribute the forces from the inside of the legs to the outside to lessen the effect of 3 injury following a fall. Use of fall protection components in a way that allows a worker to be supported in a harness 2013 Capital Safety under tension, so that a fall is prevented, e.g. the use of a pole strap or lanyard. 4 Vest Hold harness by back D-ring, ensure all buckles are undone and ensure there are no tangles in the webbing. Holding the shoulder straps slip harness over arms and onto shoulders like a jacket. Check straps are not tangled and hang freely. Crossover Holding harness on your right ensure all buckles are undone and straps aren t twisted. Slip the harness over your head 5/6 5/ /6 from right to left and attach the is positioned directly below the 2013 Capital Safety 4. Leg Straps buttocks. Ensure the straps are frontal attachment strap on your Pass left leg strap between legs adjusted to the same length on left side. Front D-ring should ensuring it is not twisted and each side. beheight positioned atsafety the base of the CONFINED SPACE INDUSTRIAL RESCUE fasten with relevant buckle on left rib cage (sternum)) so that the Crossoverr Adjust sub pelvic hand side. Repeat procedure with shoulder straps will not slip off strap to sit directly below the right side. the shoulders. buttocks by tightening the upper D right hand buckle (to raise both 3. Sub pelvic strap the sub-pelvic and front D-ring) The positioning of the sub-pelvic and then the lower left side frontal strap is critical. adjustment strap. Vest Adjust the shoulder straps to ensure the sub-pelvic strap Note:: This strap may need to be fed through the frontal D-ring. Make sure webbing does not cross between legs. Adjust the leg straps so that a flat hand (Not a Fist)) can be placed between the leg and the leg strap (Fig. D). 5. Chest Strap & Waist belt Note: Not all models have a chest strap or waist belt. Position chest strap across the middle of the chest, approximately 3 finger widths above the base correctly. The dorsal D-ring should of the sternum. Shoulder straps should be vertical, not pulled into be positioned centrally between centre of body. Connect the waist the shoulder blades. buckle ensuring that the webbing Keepers should be positioned straps are not twisted and kept properly to prevent webbing loose so that the belt does not slippage and entanglement. If two impact a worker during a fall Capital Safety keepers are present, one should be 6. Final Adjustments positioned tight against the buckle The harness should be comfortable to keep it in adjustment and the second to store the extra webbing. without undue pressure on the shoulders, thighs or pelvis. You should still have your full range of motion with the harness fitted Consult user manual provided with all DBI-SALA & PROTECTA harnesses for complete information on donning, limitations, use and care, Contact Capital Safety with questions or to obtain a copy of the user instruction manual. GLOBAL LEADER IN FALL PROTECTION Quality IS Shock Absorber/Energy Absorber HEIGHT SAFETY CONFINED SPACE INDUSTRIAL RESCUE BUCKLE TYPES GLOBAL LEADER IN FALL PROTECTION Quality Q IS S D INSPECTION & FITTING GUIDE Th fa have in such a hav been designed to work together 6 Monthly Height Safety way that their sizeho and shape do not cause them to GLOBAL LEADER IN FALL PROTECTION sepa separate inadvertently during use. Environment IS Suspension Intolerance OFFFA O FALL PROTECTION FALL A ALL AL LL L L PROTECTION HARNESS Extension arre arrest pers All items of personal and common use equipment All items which have been stressed as a result of a fall of a3. Allpersonal fallthanarrest system orto parts of a pers who is competent, see Clause 9.2. by another person inspections other those by the operator are be documented. Safety Equipment should be cleaned regularly. The frequency of cleaning depends on the A self-closing hook or karabiner with a keeper component within the system. of Control conditions within they are used.hierarchy It is recommended that the cleaning intervals latch whichenvironmental will automatically close andwhich remain The hierarchy of control is a sequence of options should not exceed 3 monthsthese for webbing cleaning process should remove contaminates, closed until manually operated. unitsproducts. The by Capital Safety,Compatibility inspection scheduling for other fall protection equipment is given As recommended recomme including: dirt, dust, paint, grease, oil and chemicals.which allow you to control a hazard from the have a minimum of two (double) or three (triple) below. Equipment is deemed compatible when they highest level of control to the least preferred Capital Safety s user instruction for further information. distinct andconsult deliberate consecutive actionsmanuals to Quality IS A (click on the Safety Resources tab) Manufacturer s supplier s or installer s name & D-Ring/Attachment Point address Clause 9.2 Harnesses, lineworkers body belts & assemblies Clause 9.3.4(a) 12 monthly inspection is recommended by Capital Safety. Horizontal and vertical lifelines: Steel rope or rail v (Ladder Safety Systems) S FFD Item to be Recorded A B C D Provides a connection point onto an anchorage 12-monthly inspection by a Height Safety Equipment (Note 3).in order to attach the or building Inspector structure Up to 5-yearly inspection if recommended by the rest of the manufacturer. fall arrest system. vermmlifelines:300 Horizontal600 or vertical Fibre rope, mmwebbing 1000 mm 1500 mm 2000 mm THE Inspection by a Height Safety Operator and/or Height Safety (Note 3). 6-monthly inspection by a Height Safety Equipment Inspector Anchorage Connector (Note 3). slings Ropes and sling Anchorages drilled-in type or attached Anchorages dr to timber frames Anchorages other types Anchorages ot bbased a upon FFD Reference Equipment Inspector (Note 2) before after each use. A secure point of attachment forand lifelines or 6-monthly inspection e.g. by a Height Safety Equipment Inspector deceleration devices, lanyards & self (Note 3). retracting lifelines. 6-monthly inspection by a Height Safety Equipment Inspector associated personnel equipment Harnesses, lanyards, lanya devices (external inspection only) Fall-arrest devic DD can c be estimated manuals l should h ld be b readd andd inspection i ti / service i requirements understood in order to maintain the service life of the equipment. Records of inspections and maintenance must be recorded in an inspection and maintenance maintained the company. Lis Listed below is a collection of frequently used fall protection log terms - for abymore complete summary refer to AS/NZS 1891 (Parts 1 & 4). sum (Also known as Orthostatic Intolerance, Suspension Trauma). A term used to describe the potential after-effects of immobile suspension within a fullwebbing or shock absorber to wrap around the back body safety harness following a fall from height. According to locking AS/NZSgate , shall have a 10 year Itproduct of the of the web hookproducts and unintentionally presents with the development of a range of life from thethe date of manufacture, after which the product must be removedwhich may result in unconsciousness trip gate. symptoms or death, and is thought to occur as a result of from service. All other Capital Safety equipment, such as type 1 fall arrestors, Personal Fall Arrest Systems lowprovided blood pressure secondary to blood pooling in type 2 and type 3 self retracting lifelines, can be used indefinitely, the legs, pelvis and abdomen of victims who are (PFAS) the equipment continues to pass the required inspections prescribed by the suspended and motionless. of components that manufactureraandcombination AS/NZS when used together will arrest a Total restraint person in a fall from a working level. Control on a person s movement by means of PFASService typically consist of: an anchorage, full body RemovalAfrom to an anchorage using non-adjustable connectors and a deceleration device such removalconnection Capitalharness, Safety Group recommends the following regarding of equipment in such a way that it will physically as a lanyard or SRL. equipment from service: prevent the person from reaching any position at there is risk of a fall, either over an edge, Strapincluding both personal and permanentlywhich Any piece ofpole equipment installed strap to items, which Ahaswork been positioning used to arrest a falldesigned shall be removed fromthrough service a surface or due to a failed moveable platform. be placed around a pole/structure and immediately. Any defect identified during operator or periodic inspections attached at two points, one on each side shall be withdrawn from service immediately and a replacement obtained Type 1 iffall Arrest Device of a line worker s fall arrest harness while necessary. label indicating to the Includes rope & rail grabs - A fall arrest device thea wearer is workingthe on condition the pole. or defect must be attached that travels along an anchorage line and, when equipment, and it must be examined by a competent loaded, locks to the line. The user is connected to Rescue person who will decide whether the equipment is the activating lever, which locks the device in the Theorability to retrieve rescue an individual to be destroyed returned to theor manufacturer event of a fall. A typical use of a Type 1 device is from confined spaces or heights. Rescue or their service agent for evaluation. Only the as a ladder fall-arrest system, using a rigid rail or must always be a component of any fall manufacturer or their service agent may flexible line attached to the ladder. protection program. make repairs or alterations to any piece of Type 2 & 3 Fall Arrest Device Technique height Restraint safety equipment. Control on a person s movement by connection Self Retracting Lifeline (SRL) In accordance with AS/NZS ,prevent the person to an anchorage to physically A deceleration device containing a personal web products must be at marked from reaching a position which there is a risk drum-wound line which may be extracted with a of date by which theyfree are to be taken a free or limited fall. and retracted under slight tension when the out of service and destroyed (10 years from user moves vertically away from and towards the Risk Assessment device. In the event of a fall, the device will quickly date of manufacture). This date is typically The evaluation of hazards within the worksite lock the drum and prevent the lifeline from paying locatedwhich on the product description label, have the potential to cause frequent serious 2013 Capital Safety out, thus arresting the user s fall and limiting the adjacent to the certification label, injury or illness to occur. force to 6kN. When incorporating a retrieval winch, or in the label pack. it becomes a type 3 fall arrest device. Revision B. 05/13 C= in or rd to reduce RD. order Safetyy Equipment Inspector and records kept q p p p showing the inspection periods and re-entry into service. service Manufacturer s Manufacturer s instruction Latch Protection Device A device that attaches to the eye of a snap hook that reduces the risks that can become present in methods/techniques that causes the various work PRODUCT LIFE Always remember: If in doubt tag it out! Revision B. 05/13 When using a DBI-SALA lanyard Revision C. 05/13 DD As p per e AS/NZS , Inspection and maintenance of fall protection equipment should be carried out by a Height GLO GL G LO LO OS S SS SA SAR SARY S AR ARY A RY OF FALL PROTECTION TERMINOLOGY FFD VEST STYLE Order your FREE educational Fall Protection Posters from RD INSPECTION HEIGHT SAFETY CONFINED SPACE INDUSTRIAL RESCUE AUS: NZ: Capital Safety KER S EVERY WOR GUIDE TO HEIGHT SAFETY ALLSHEIGHT IAL ESSENTIA SAFETY ESSENTIALS EVERY WORKER S GUIDE TO Order your FREE copy of our Every Worker s Guide to Height Safety Essentials at: (click on the Safety Resources tab) SAFETY BY T OF WORKER EXPERTS. EST INTERE THE INTEREST ION N THE ED IN OPED DEVELOP THE FALL PROTECT THE DEVELOPED IN THE INTEREST OF WORKER SAFETY BY THE FALL PROTECTION EXPERTS. STAY UP TO DATE WITH THE LATEST IN FALL PROTECTION, HEIGHT MANAGEMENT AND SAFETY, FOLLOW US ON: twitter.com/capital_safety youtube.com/fallprotectiontv facebook.com/capitalsafety capitalsafety.tumblr.com linkedin.com/company/capital-safety slideshare.net/capital_safety instagram.com/capitalsafety pinterest.com/capitalsafety WORKING AT HEIGHT ASSOCIATION (WAHA) Capital Safety is proud to be a member of the Working At Height Association (WAHA) of Australia. WAHA is dedicated to the ongoing development of the highest standards of equipment and competency of all persons involved in working at height. WAHA recognises that working at height is a high risk operation and the highest possible standards must be applied, if you are involved with height safety equipment in any way why not consider becoming a member and see how WAHA can assist you, find out more at: AUS: NZ:

46 SERVICES TRAINING FALL PROTECTION TRAINING Capital Safety offers a range of training and consulting services to fit your needs, ensuring you or your employees are thoroughly trained in a practical, hands-on environment. IN-HOUSE TRAINING FACILITIES Custom-built, in-house training facilities at both our Sydney and Darwin training centres provide a hands-on training experience. Practical demonstrations, individual exercises and theoretical assessment ensure our courses build confidence and enhance safety competence when working at heights. ON-SITE TRAINING Capital Safety offers its training programs at the client s site to all locations across Australia. If you can provide the students and the location, we will provide the equipment and experienced instructors. TAILORED TRAINING Capital safety also tailor training courses to suit a company s individual requirements. We specialise in the design and implementation of training for industry sectors such as: civil, construction, mining, and wind energy. We also offer specialist courses such as: roof top and bridge rescue, jump form, tower crane and swing stage rescue, drill rig rescue, post fall recovery and wind turbine rescue. ONLINE LEARNING: Capital Safety has developed online versions of the Height Safety Theory and Height Safety Equipment Inspection training, contact us to find out more, or to sample a free limited demonstration of the training. Capital Safety is accredited by the National VET Regulator, ASQA, to deliver the following nationally recognised units of competency: RIIOHS204A Work Safely at Heights RIIOHS202A Enter and Work in Confined Spaces MSAPMPER205C Enter Confined Space MSAPMPER200C Work in Accordance with an Issued Permit MSAPMOHS217A Gas Test Atmospheres MSAPMOHS216A Operate Breathing Apparatus PUASAR022A Participate in a Rescue Operation PUASAR032A Undertake Vertical Rescue HLTAID001 Provide cardiopulmonary resuscitation HLTAID002 Provide basic emergency life support HLTAID003 Provide first aid MEM11011B Undertake Manual Handling Capital Safety is a Registered Training Organisation (Provider No ) For course details or to book online visit 46

47 Capital Safety SITE INSPECTION & REPORTING SERVICE Is your site safe to work at height? The law requires that you provide a safe work environment for staff, visitors and contractors. How long has it been since your last site inspection? One of the biggest challenges facing many companies is understanding where the working-at-height risks exist on site and the types of measures that can be taken to minimise them. Our trained technicians will utilise our exclusive Capital Safety Inspection Reporting Tool (CSIRT) to develop a thorough report, making recommendations that employ worlds best practice regarding fall protection in your workplace. Contact your Regional Sales Manager or our Customer Service Centre on (AUS) (NZ) to book your site inspection or for more information. Are you looking for more?» New Products» Instruction Manuals» Safety References» Find your local distributor» Full Product Range» Technical Bulletins» Product Images» Find a certified Installer» Detailed Product Specifications» Fall Distance Calculations» Glossary (fall protection terminology)» Find your local Sales Manager It s all available at AUS: NZ:

48 Environment RELY ON THE WORLD S LEADING HEIGHT SAFETY COMPANY WE VE GOT YOUR BACK CALL (AUS) (NZ) Capital Safety is a global company solely dedicated to fall protection and rescue. Our focus is razor sharp, it continually drives us to design and manufacture the safest possible height safety gear. We understand the industries we serve and listen to the workers in the field. We employ the best engineers to create innovative solutions and patent the products that keep workers safe at heights around the world. Capital Safety has the best quality and largest range of fall protection products in the industry. But we re more than a product company. We take an innovative approach in bringing our products to the field. We have created international partnerships and a vast network of authorised distributors, certified installers and service centres. We offer on-site and in-house training. Our manufacturing sites hold ISO 9001 quality accreditation, as well as ISO environment and AS4801 Health & Safety accreditation. Capital Safety is one of the world s leading manufacturers of fall protection and rescue equipment, with decades of experience and a legacy of innovation. Look for complete solutions in our extensive range of DBI-SALA and Protecta brands. DEDICATED TO BRINGING EVERY WORKER AT HEIGHT HOME SAFELY HEAD OFFICE AND MANUFACTURING 95 Derby Street Silverwater NSW 2128 Australia Phone: Fax: [email protected] 2014, Capital Safety (Australia) Part#: A200-S Oct 14 Quality IS IS Health & Safety AS 4801 GLOBAL LEADER IN FALL PROTECTION HEIGHT SAFETY CONFINED SPACE INDUSTRIAL RESCUE