This chart is intended for selection purposes only. For complete product application information, refer to individual product specification sheets.
|
|
|
- Theresa Morton
- 7 years ago
- Views:
Transcription
1 1/99 Modutrol Motors Selection Guide This chart is intended for selection purposes only. For complete product application information, refer to individual product specification sheets. 2-POSITION SPRING RETURN M436A wire, line voltage, spst N.C. 20 M436A1116a wire, line voltage, spst N.C. 20 M436A1124a wire, line voltage, spst N.C. 20 M836A wire, low voltage, spst N.C. 20 M836A1042a 24 2-wire, low voltage, spst N.C. 20 M436B wire, line voltage, spst N.C. 15 M847A wire, low voltage, spst N.C. 30 (oz-in) M4185A wire, line voltage, spst N.C. 60 M4182B wire, line voltage, spst N.C. N.C. 60 M4185B wire, line voltage, spst N.C. 60 M4185B /240 2-wire, line voltage, spst N.C. 60 M8185B wire, line voltage, spst N.C. N.C. 60 M4185B /208/240 2-wire, low voltage, spst N.C. 60 M8185D1006 a 24 2-wire, low voltage, spst 30/60 90/160 F/Ad N.C. 60 SPDT OR FLOATING M6161A wire, line voltage, spdt N.C. 35 M6181A wire, line voltage, spdt N.C 150 M6181F wire, line voltage, spdt 30/60 90/160 2 N.C. 150 M6184A wire, low voltage, spdt N.C. 150 M6184A wire, low voltage, spdt M6184A wire, line voltage, spdt M6184B wire, low voltage, spdt 120/ M6184D wire, low voltage, spdt 15/30 90/ M6184D1035 a 24 3-wire, low voltage, spdt 30/60 90/160 F/Ad 150 M6184D wire, line voltage, spdt 15/30 90/160 0 N.C. 75 M6184D wire, low voltage, spdt 120/240 90/160 0 N.C. 150 M6184F wire, line voltage, spdt 30/60 90/160 2 N.C. 150 M6194D1017 a 24 3-wire, low voltage, spdt 120/240 90/160 F/Ad 300 M6194E wire, low voltage, spdt 120/240 90/160 1 N.C. 300 M6284A spdt, position prop. controller DC300E b,*,** N.C. 150 M6284A spdt, position prop. controller DC300Eb M6284A spdt, position prop. controller DC300Eb M6284A spdt, position prop. controller DC300E b,*,** F/A d 150 M6284A spdt, position prop. controller DC300E b,*,** F/Ad 75 M6284C spdt, position prop. controller DC300E b,*,** N.C. 150 M6284D1000 a 24 spdt, position prop. controller DC300E b 30/60 90/160 F/Ad 150 M6281F spdt, position prop. controller DC300E b,*,** 30/60 90/160 2 N.C. 150 M6284F spdt, position prop. controller DC300Eb 30/60 90/ M6284F spdt, position prop. controller DC300E b,*,** 30/60 90/160 2 N.C. 150 M6294D1008 a 24 spdt, position prop. controller DC300E b 120/240 90/160 F/Ad 300 *With cams for field adding of auxiliary switches **MOV Metal Oxidize Varistors for position proportional controller Industrial Automation and Control Division, 1100 Virginia Drive, Fort Washington, PA Printed in U.S.A. n Copyright 1999 Honeywell Inc.
2 Page 2 SPDT OR FLOATING WITH SPRING RETURN M6285A1005 a 24 spdt, position prop. controller DC300E b F/Ad N.C. 60 M6285A1013 a 24 spdt, position prop. controller DC300E b F/Ad N.C. 60 PROPORTIONAL REVERSING M7281A ma N.C. 150 M7282A ma N.C. 60 M7284A ma, DC200C, N.C. 150 M7284A ma, DC200C, N.C. 150 M7284A ma, DC200C, * N.C. 150 M7284A ma, DC200C, * F/Ad N.C. 75 M7284A ma, DC200C, * F/Ad N.C. 150 M7294A Vdc N.C. 300 M7964B Thermistor No 35 M7164G Vdc No 135 M7284C ma, DC200C, N.C. 150 M7284C ma, DC200C, N.C. 150 M7284C ma N.C. 150 M7284C ma, DC200C, *** N.C. 150 M7284C ma, DC200C, *** N.C. 150 M7284Q ma adj. zero and span, DC200C, M7294Q ma adj. zero and span, DC200C, M7284Q ma adj. zero and span, DC200C, *** N.C N.C N.C. 150 M7364A ma, 3-wire N.C. 35 M7384A ma, 3-wire N.C. 35 M9161A ohmc N.C. 35 M9164A ohmc N.C. 35 M9164A ohmc N.C. 35 M9164A ohmc N.C. 35 M9164C ohmc N.C. 35 M9164C ohmc N.C. 35 M9164D1009 a ohm c 30/60 90/160 F/Ad N.C. 35 M9171A ohmc N.C. 75 M9174B ohmc **** N.C. 75 M9174B ohmc N.C. 75 M9174C ohmc N.C. 75 M9174C ohmc N.C. 75
3 Page 3 M9174D1007 a ohm c 30/60 90/160 F/Ad N.C. 75 M9175D ohmc **** 30/60 90/160 0 N.C. N.C. 25 M9175D ohmc **** 30/60 90/160 0 N.C. N.C. 25 M9181A ohmc N.C. 150 M9184A ohmc N.C. 150 M9184A ohmc N.C. 150 M9184A ohmc N.C. 150 M9184B ohmc N.C. 150 M9184C ohmc N.C. 150 M9184D ohmc **** 15/30 90/160 0 N.C. 75 M9184D1013 a ohm c 30/60 90/160 F/Ad N.C. 150 *With cams for field adding of auxiliary switches *** Enhanced Series M reposition across stroke. ****With Adapter,Bracket PROPORTIONAL REVERSING (continued) M9184D1021 a ohm c 30/60 90/160 F/Ad N.C. 150 M9184F ohmc 30/60 90/160 2 N.C. 150 M9184F ohmc 30/60 90/160 2 N.C. 150 M9185E ohmc 30/60 90/160 1 N.C. 60 M9194C ohmc N.C. 300 M9194D1003 a ohm c 120/240 90/160 F/Ad N.C. 300 M9194E ohmc 120/240 90/160 1 N.C. 300 M9484D ohmc 15/30 90/160 0 N.C. 75 M9484D ohmc 30/60 90/160 0 N.C. 150 M9484D ohmc 30/60 90/160 0 N.C. 150 M9484D ohmc 15/30 90/160 0 N.C. 75 M9484E ohmc 15/30 90/160 1 N.C. 75 M9484E ohmc 30/60 90/160 1 N.C. 150 M9484E ohmc 30/60 90/160 1 N.C. 150 M9484E ohmc 30/60 90/160 1 N.C. 150 M9484F ohmc 30/60 90/160 2 N.C. 150 M9484F ohmc 15/30 90/160 2 N.C. 75 M9484F ohmc 30/60 90/160 2 N.C. 150 M9484F ohmc 30/60 90/160 2 N.C. 150 M9494D ohmc 60/120 90/160 0 N.C. 300 PROPORTIONAL REVERSING WITH SPRING RETURN M7285A ma, DC200C, N.C. N.C. 60 M7285A ma, DC200C, N.C. N.C. 60 M7285C ma, DC200C, N.C. N.C. 60 M7285C ma, DC200C, N.C. N.C. 60 M7285Q ma adj. zero and span, DC200C, N.C. N.C. 60 M7285Q ma adj. zero and span, DC200C, N.C. N.C. 60 M9175D1014 a ohm c 30/60 90/160 F/Ad N.C. N.C. 25
4 Page 4 M9185A ohmc N.C. N.C. 60 M9185A ohmc N.C. N.C. 60 M9185C ohmc N.C. N.C. 60 M9185D1004 a ohm c 30/60 90/160 F/Ad N.C. N.C. 60 M9186G ohmc N.O. N.O. 50 FOOTNOTES a TRADELINE item. b R7252 or DC300E DialaTrol (Industrial Automation and Control Division) c Resistor kit, resistor board, or interface module can be used to drive Series 90 motor(s) with controllers that provide current or voltage electronic signal. Refer to Modutrol IV Motor Parts and Accessories section. d Field-Addable Internal auxiliary switches can be field added to TRADELINE models. e UL555 listed for use with D6405D Smoke Dampers. Includes linkage hardware for internal mount. f UL555 listed for use with D6405D Smoke Dampers. Includes linkage hardware for external mount. DEFINITIONS : Mechanical normal position motor spring returns to (N.C. or N.O.) when power loss occurs. Electrical normal position (N.C. or N.O.) motor drives to when control wiring not connected to powered motor. NOTE: No entry under means that motor remains where it stops on loss of power or signal (does not return to normal position). N.C. Normally closed shaft in full counterclockwise position, as viewed from power end. N.O. Normally open shaft in full clockwise position, as viewed from power end. CW Shaft goes to clockwise position as viewed from power end. CCW Shaft goes to counterclockwise position as viewed from power end. MODUTROL MOTOR PARTS AND ACCESSORIES Order Number Description Use With CONTROLS A, B Internal auxiliary switch kits Modutrol IV TRADELINE motors HARDWARE Q605F, G, H, J Damper linkage kits Modutrol IV motors, includes 7617ADW crank arm Q298B Damper linkage, includes crank arm, push rod, ball M436/M836; M6415/M7415/M8415 motors joint, bushings Ball joint For 5/16 in. rod 7617DM Coupling Explosion-proof housing, Modutrol motors ES650117* Housing, explosion-proof Modutrol motors on dampers (requires 7617DM) 4074EHB Screw terminal adapter M7405, M7415, M8405, M A Screw terminal adapter Modutrol IV motors 7640QF Terminal enclosure M7405, M7415, M8405, M EKV switch M6415, M7405, M7415, M8405, M ERU Modutrol IV weatherproofing kit Modutrol IV non-spring return, spring return CRANK ARMS A Crank arm infinitely adjustable short arm Modutrol IV motors 4074ELY Crank arm Infinitely adjustable long arm Modutrol IV motors with mounting bracket 7616BR Crank arm standard long arm Modutrol IV motors with mounting bracket 7617ADW Crank arm standard short arm Modutrol IV motors POTENTIOMETERS Q181A potentiometers All Modutrol motors Q209E Cover mounted minimum position potentiometer M9164; M9174; M9175; M9184; M9185; M9186; M9194; Q209F Internal mounted minimum position potentiometer M9484; M9494 Q68B Dual control potentiometer Modutrol motors Q709A Actuator mounted minimum position potentiometer M7405, M7415 actuators S443A Manual minimum position potentiometer All Series 90 Modutrol motors S963B Remote potentiometers All Series 90 Modutrol motors Q volt adaptor M7415A RESISTOR KITS 4074BYK Resistor kits Parallel up to 6 Series 90 Modutrol motors with solid state drive circuits from one Series 90 controller. 4074EAU Parallel up to 3 Series 90 Modutrol motors with solid state drive circuits from a W973 Singlezone Logic Panel or W7100 Discharge Air Controller 4074EDC Drive one Series 90 Modutrol motor with solid state drive circuits from a 4-20 ma controller 4074EED Parallel up to 4 Series 90 Modutrol motors with solid state drive circuits from a 4-20 ma controller
5 Page 5 MODUTROL MOTOR PARTS AND ACCESSORIES Order Number Description Use With A Resistor board Can be used in place of any of the above 4 resistor kits with Series 90 Modutrol IV motors TRANSFORMERS JA 24 Vac internal mount Any Modutrol IV motor EA 120 Vac internal mount GA 220 Vac internal mount AA 120/208/240 Vac internal mount INTERFACE MODULES Q7230A1005 Adjustable voltage or current control (includes 2-10 Series 90 Modutrol IV motors Vdc and 4-20 ma) *Order from Nelson Electric Co., Order Services Dept., P.O. Box 726, Tulsa, OK 74101, (918) MOTOR DAMPER APPLICATION GUIDE B Dimensiona Damper Rating lb-in N m in mm sq ft sq m a Maximum size damper that motor can operate. B dimension is the outside dimension of the frame perpendicular to the blades.
Cross Reference Modutrol IV Motor Cross Reference For Honeywell and Competitive Motors
Cross Reference Modutrol IV Motor Cross Reference For Honeywell and Competitive Motors 63-2691-01 Modutrol IV Motor Cross Reference FOR HONEYWELL AND COMPETITIVE MOTORS HOW TO USE THIS MANUAL This cross
Series 90 Modutrol IV Motors
Series 90 Modutrol IV Motors PRODUCT DATA FEATURES APPLICATION The Series 90 Modutrol IV Motors are spring return and non-spring return modulating proportional control motors. Use these motors with controllers
Series 71, 72, and 76 Modutrol IV Motors
Series 7, 7, and 76 Modutrol IV Motors PRODUCT DATA FEATURES APPLICATION The Series 7, 7 and 76 Modutrol IV Motors are spring return and nonspring return motors used to control dampers and valves. The
I nstallation. M100Q Series Proportional Actuator with R81Q Controller Board for Thermistor Sensor Applications. Tools Needed.
FANs 268.1, 1628.3 Installation Bulletin M100Q Issue Date 1099 M100Q Series Proportional Actuator with R81Q Controller Board for Thermistor Sensor Applications I nstallation Parts Included M110QGA-1 and
N20xxA, N34xxA NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR FLOATING AND 2-POSITION CONTROL
N2xxA, N34xxA NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR FLOATING AND 2-POSITION CONTROL SPECIFICATIONS Supply voltage N224A / N3424A N223A / N3423A PRODUCT DATA 24 Vac 15%, 5/6 Hz 23 Vac 15%,
M9102-AGA-2S, -3S and M9104-xxA-2S, -3S Series Electric Non-Spring Return Actuators
M9102-AGA-2S, -3S and M9104-xxA-2S, -3S Series Electric Non-Spring Return Actuators Product Bulletin Code No. LIT-1201742 Issued February 12, 2015 The M9102 and M9104 Series Actuators are directmount,
Installation Instructions
0.1.2....6.7..9 1 0.1.2....6.7..9 1 Installation Instructions Quick-Mount Visual Instructions for Mechanical Installation Quick-Mount Visual Instructions 1. Rotate the damper to its fail-safe position.
S03, S05 Series Low-Torque Spring- Return Direct-Coupled Actuators
S, S Series Low-Torque Spring- Return Direct-Coupled Actuators S, S, S, S, S, S INSTALLATION AND OPERATING INSTRUCTIONS S, S Series Low-Torque Spring-Return Direct-Coupled Actuators (DCA) are used for
TAC I/NETTM MR-VAV-AX. Application Specific MicroRegulator TM
TAC I/NETTM TM TAC s TM has an extensive range ofpre-engineered VAV control sequences, which combined with a fully integrated actuator and airflow transducer, makes it a low Total Installed Cost solution
DUCT SMOKE DETECTOR D4120
Purpose/Application National and local safety standards and codes recognize the ability of air duct systems to transfer smoke, toxic gases, and flame from area to area. Sometimes smoke can be of such quantity
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
Servo Info and Centering
Info and Centering A servo is a mechanical motorized device that can be instructed to move the output shaft attached to a servo wheel or arm to a specified position. Inside the servo box is a DC motor
DORMA MODEL PS-406BB POWER SUPPLY INSTALLATION INSTRUCTIONS
Features: INSTALLATION Install in accordance with NFPA 70. DORMA MODEL PS-406BB POWER SUPPLY INSTALLATION INSTRUCTIONS Up to 1.95 Amps Load Capacity Class 2 Rated Outputs Overload, Over Voltage, and Short
DMX-K-DRV. Integrated Step Motor Driver + (Basic Controller) Manual
DMX-K-DRV Integrated Step Motor Driver + (Basic Controller) Manual DMX-K-DRV Manual page 1 rev 1.33 COPYRIGHT 2007 ARCUS, ALL RIGHTS RESERVED First edition, June 2007 ARCUS TECHNOLOGY copyrights this document.
WE-350 Series ¼ Turn Electric Actuator
WE-350 Series ¼ Turn Electric Actuator Operation and Installation Manual Pg 1 (Rev. 020113) Table of Contents 1.0 General 1.1 Pre-Installation Inspection 1.2 Storage 1.3 Features & General Information
ECONOMIZERS. PARTS LIST Commercial Replacements Publication Date: January, 2004 Form No: 92-100954-02-00 CATALOG TAB - COMMERCIAL ROOFTOPS
ECONOMIZERS PARTS LIST Commercial Replacements Publication Date: January, 2004 Form No: 92-100954-02-00 CATALOG TAB - COMMERCIAL ROOFTOPS TABLE OF CONTENTS NOTES Page 2 MODEL NUMBER EXPLANATION Page 3
Service Information CALIBRATION PROCEDURE AND TROUBLESHOOTING FOR LINEAR GOVERNOR CONTROLLERS NOTE
Service Information Calibration & Adjustments CALIBRATION PROCEDURE AND TROUBLESHOOTING FOR LINEAR GOVERNOR CONTROLLERS Part Number DYN1-10752-000-0-12/24 DYN1-10752-001-0-12/24* DYN1-10753-000-0-12/24
Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com. Installation and operating manual
Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-EL Electric actuator Installation and operating manual Remote position
225-230T-05-S2. Rotary drive without spring return. Technical data sheet. Description. Technical data. Actuators
Actuators Technical data sheet 225-230T-05-S2 Rotary drive without spring return Description Actuator for adjusting air dampers of 90 angle of rotation to be used in HVAC installations. Torque Motor 5
SHIFT INTERLOCK SYSTEM SHIFT INTERLOCK SYSTEM
SHIFT INTERLOCK SYSTEM The shift lock system is designed to ensure the proper operation of the automatic transmission. The driver must depress the brake pedal in order to move the gear selector from Park
Ordering Part Numbers: Universal Signal Converter: USC-CVB225-01 Universal Signal Converter with a 4-20mA input and +/- 10V output: USC-CVB225-B10V
Description: The universal signal converter offers threeway isolation and translates one input control signal into one to three simultaneous outputs. Switches allow the user to select the desired input
SECTION 16721 FIRE ALARM AND SMOKE DETECTION SYSTEMS
SECTION 16721 PART 1 - GENERAL 1.1 SECTION INCLUDES A. Fire Alarm Control Panels B. Manual Fire Alarm Stations C. Automatic Smoke D. Fire Alarm Notification Appliances E. Auxiliary Fire Alarm Equipment
TorqPlus TM Electric Valve Actuators and Controls
TorqPlus TM Electric Valve Actuators and Controls Torque 150 IN/LB 600 IN/LB The Engineered Solution Bettis TorqPlus quality line of electric actuators are designed for quarter turn applications ball,
Veeder Root and Eagle Signal Timers and Counters
Part Number Description LT DC RC List Price 0015537-070 Meas. wheel,.251 in. bore, 1 ft. cir., 1/2 in. wide, rubber face 3 EM R 121 0015537-095 Meas. wheel,.251 in. bore, 1 ft. cir., 1/2 in. wide, smooth
Capacitive Prox E2K-X
Capacitive Prox Threaded, Cylindrical Sensor Detects Metallic and Non-metallic Objects Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic Allows
conventional system operation
conventional system operation detection line operation Conventional detection systems normally operate on a 24VDC line. In the standby condition, the detectors will draw a low current, typically less than
INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
Retrofit with Siemens
www.usa.siemens.com/hvac Retrofit with Our valves and damper actuators are easy on the budget and easy to install the perfect solution for your next retrofit job. Answers for infrastructure and cities.
TS93 EMR T/PT/TDE. Surface applied door closer
TS EMR T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer with smoke detector (EMR T) Push side track mount door closer with smoke detector (EMR PT) Double
OEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE
OEM Manual MODEL 2350 ELECTRONIC DUAL CYLINDER SCALE Scaletron Industries, Ltd. Bedminster Industrial Park 53 Apple Tree Lane P.O. Box 365 Plumsteadville, PA 18949 USA Toll Free: 1-800-257-5911 (USA &
EXPERIMENT 2 TRAFFIC LIGHT CONTROL SYSTEM FOR AN INTERSECTION USING S7-300 PLC
YEDITEPE UNIVERSITY ENGINEERING & ARCHITECTURE FACULTY INDUSTRIAL ELECTRONICS LABORATORY EE 432 INDUSTRIAL ELECTRONICS EXPERIMENT 2 TRAFFIC LIGHT CONTROL SYSTEM FOR AN INTERSECTION USING S7-300 PLC Introduction:
650W Single Output Power Supply 15V 24V. 27V 48V Rated Current. 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 27A 0 ~ 24A 0 ~ 13.6A Rated Power
Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output Forced current sharing at parallel operation Power OK signal
INSTALLATION INSTRUCTIONS COMMERCIAL ROOM VENTILATORS WITH EXHAUST
INSTALLATION INSTRUCTIONS COMMERCIAL ROOM VENTILATORS WITH EXHAUST MODEL CHCRV-5 For Use with Bard CH Series 3, 4 & 5 Ton 2-Stage Wall Mount Heat Pumps AND W38H, W43H, W49H and W61H Single Stage Wall Mount
Digital Controllers ACTUATOR COMPATABILITY
Product Specification 36502B DESCRIPTION APECS DPG-21XX-00X Digital Controllers The DPG-21XX-00X digital controller is used primarily to govern diesel or gas fueled engines of generator sets. This microprocessor-based,
Model 2300DR Installation Guide
Model 2300DR Installation Guide POWER ACCESS CORPORATION P.O. BOX 1050 170 MAIN STREET NEW HARTFORD, CT 06057 800-344-0088 WEBSITE: www.power-access.com EMAIL: salesinfo@power-access.com 1 STANDARD PARTS
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
SBM Control & Transfer Switch Rotary switches for circuit breaker control, motor control or instrument transfer. Features and Benefits Applications
SBM Control & Transfer Switch Rotary switches for circuit breaker control, motor control or instrument transfer. Features and Benefits Compact design Up to 10 stages (20 contacts) Double surface cams (one
CONNECTOR AMPLIFIER FOR PROPORTIONAL VALVES (4-20 ma Input Version)
TECHNICAL DATASHEET #TD1102AX CONNECTOR AMPLIFIER FOR PROPORTIONAL VALVES (4-20 ma Input Version) Part Number: Connector Amplifier CAPV-H-4-20MA-x complete with cable CAPV-4C-yM Where: x = current output
PIEZOMETER AIRFLOW MEASURING RING
PIEZOMETER AIRFLOW MEASURING RING M.K. Plastics is pleased to introduce The Piezometer Airflow Measuring Ring, now available as an accessory for our steel Axijet fans. The system consists of a Piezometer
Color Mark Sensor with Red or Green LED E3S-VS
Color Mark Sensor with Red or Green LED Rugged IP67 Color Mark Sensor 1 ms response time Detects a wide variety of color marks PNP or NPN output ls Light-on/ Dark-on operation, wire selectable Vertical
VG7000 Series Bronze Control Valves
VG7000 Series Bronze Control Valves Product Bulletin VG7000 Series Code No. LIT-977140 Issued November 15, 2013 Supersedes March 29, 2013 VG7000 Series Bronze Control Valves are designed primarily to regulate
Self Monitoring Power Supply (BPSM)
LIFETIME REPLACEMENT WARRANTY Self Monitoring Power Supply (BPSM) Application - When interfacing with a fire alarm system where the system s auxiliary relay cannot handle the full current potential of
T7079A,B Solid State Remote Temperature Controllers
T7079A,B Solid State Remote Temperature Controllers FEATURES PRODUCT DATA Switch selection of heat or cool mode. Temperature sensing up to 400 feet. Does not require field calibration. 0K NTC temperature
C Standard AC Motors
C Standard AC Standard AC C-1 Overview, Product Series... C-2 Constant... C-9 C-21 C-113 Reversible C-147 Overview, Product Series Constant Reversible Electromagnetic Brake C-155 Electromagnetic Brake
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet NV24A--RE Communicative globe valve actuator for 2-way and 3-way globe valves Actuating force 1000 N Nominal voltage AC/DC 24 V Control Modulating DC (0)2...10 V Variable Nominal stroke
Holder/Release Devices with Integral Door Closers DORMA EMF/ EMR
Holder/Release Devices with Integral Door Closers DORMA EMF/ EMR DORMA EMR Holder/Release Device with Integral Detector The DORMA EMR Series holder/release device incorporates a photoelectric detector
Bourns Rotary Encoders. Short Form Brochure Revision 2
Bourns Rotary Encoders Short Form Brochure Revision 2 Introduction Bourns Sensors and Controls Division has continued to expand its encoder product offering with a wide variety of models to support our
12S, 14S, 15S Series. Time Delay Relays and Sequencers. Time Delay Relays and Sequencers. Features and Benefits. Switch Actions and Configurations
12S, 14S, 15S Series Time Delay Relays and Sequencers Time Delay Relays and Sequencers The Therm-O-Disc type 12S, 14S and 15S series time delay relays and sequencers are field-proven devices for controlling
40.3. Control Relays and Timers
.3 Contents EASY500/700/800 Intelligent Relays........ EASY/MFD Expansion Modules............ MFD Intelligent Relays................... EASY/MFD Communication Modules....... EASY/MFD Power Supplies, Accessories
Use the UL555S tested area results given in damper OEM sections below.
Fire & Smoke Actuator Replacement Cross Reference ACTUATOR REPLACEMENT STARTS WITH THE DAMPER, NOT THE ACTUATOR. Most modern actuators can be replaced like-for-like since they function identically. These
1000W Single Output Power Supply 15V 24V. Protection type: Total Power limit, Latch-style (Recovery after reset AC power ON or inhibit)
000W Single Output Power Supply AK-000 series Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output U profile,
Instruction Manual. This Manual covers the use of: SmartSwitch Servo Kit. DCC Stationary Decoder PLEASE READ THESE INSTRUCTIONS FULLY BEFORE USE
built by Instruction Manual This Manual covers the use of: PLS-125 PLS-130 PLS-135 SmartSwitch Servo Kit SmartFrog DCC Stationary Decoder PLEASE READ THESE INSTRUCTIONS FULLY BEFORE USE Contents Introduction
EDS / EFS Series Control Stations
EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures
WD-AMX Water Detection Controllers
Page 1 of 5 WD-AMX Water Detection Controllers Features: Benefit: LED Status of leak status VFC output Audible alarm Auto or manual reset alarm output Uses an isolated AC signal which prevents oxidation
8900 EMR (WITH DETECTOR)
00 EMR (WITH ) GENERAL DESCRIPTION Each 00 EMR series unit contains a door closer, hold open electromagnet and smoke detector. The unit can be used as a single installation or as a series of singles powered
650W Single Output Power Supply
AK-650 series Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 05% ) Programmable output Current ( % ~ 05% ) High efficiency up to 9% + / 0.5A auxiliary output Intelligent
SX460. Generator Automatic Voltage Regulator Operation Manual
SX460 Generator Automatic Voltage Regulator Operation Manual Self Excited Automatic Voltage Regulator Compatible with Newage SX460* * Use for reference purpose only and not a genuine Newage product. 1.
SECTION 16720 - FIRE AND SMOKE ALARM SYSTEM. City of San Diego, CWP Guidelines
PART 1 -- GENERAL 1.1 WORK OF THIS SECTION SECTION 16720 - City of San Diego, CWP Guidelines A. The WORK of this Section includes providing manual and automatic fire alarm and smoke detection systems meeting
T775U Series 2000 Electronic Stand-Alone Controller
T775U Series 2000 Electronic Stand-Alone Controller INSTALLATION INSTRUCTIONS PRODUCT DESCRIPTION The T775 electronic stand-alone controllers are the next generation of universal controls capable of remote
PRO-SERIES. Dual Axis Contact Joystick With ½ NPT Adaptor. Control Unit Features:
Dual Axis Contact Joystick With Adaptor Standard Wiring Std Mounting Thread CTI PART# : CTI-2021454 JOYSTICK JS-1 (120vAC / 30 15amp Max) Spare Replacment Components For Part # CTI-2021454 Cable Harness:
Fractional to 2 HP DC Drives for Both Non-Regenerative and Regenerative Applications
DC3 DC Drives Fractional to 2 HP DC Drives for Both Non-Regenerative and Regenerative Applications The Reliance Electric DC3 family of drives provides cost-effective variable speed control and operates
Absolute Rotary Encoder E6CP
Absolute Rotary Encoder Absolute Rotary Encoders with Gray Code Output Gray code output decreases output errors Lightweight plastic housing Used with Omron s H8PS Cam Positioner, this encoder detects the
ALARM ANNUNCIATOR ME - 3010 INSTRUCTION MANUAL
ALARM ANNUNCIATOR ME - 3010 INSTRUCTION MANUAL INTRODUCTION... 2.. TECHNICAL DATA... 3 ACCESSORIES... 5. INSTALLATION... 7 OPERATION... 12. TECHNICAL INFORMATION... 13 MAINTENANCE... 14. CONFIGURATIONS...
SKP Series SKP15U.. Gas Valve Actuator with Safety Shutoff Function
SKP Series SKP15U.. Gas Valve Actuator with Safety Shutoff Function Document No. 155-751 SKP15U.. Description Only when assembled to Series VGU Gas valves SKP15 electro-hydraulic actuators combine with
TECHNICAL DATASHEET #TD1404AX PWM CONTROLLED SOLENOID DRIVER
TECHNICAL DATASHEET #TD1404AX PWM CONTROLLED SOLENOID DRIVER (PWM Input, 1.2A or 2A Output, Metal Box or PCB) PCB Board - P/N: PWMC-PCB-2A, PWMC-PCB-1.2A Packaged Driver (metal box with 1.5 m (5 ft.) cable)
SICONT Limit Switches Type 3SE3 upto 500 VAC, 600 VDC, 10A
s SICONT Limit Switches Type 3SE3 upto 500 VAC, 600 VDC, 10A Introduction The technical and descriptive information on the function, construction and selection of the new types of 3SE3 limit switches is
Power Supplies 3. SDN-P DIN Rail Series
SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.
Universal control module for motorized devices
Ref: MOD-0105-N The MOD-0105-N is a universal module for motorized devices, blinds, awnings, curtains, doors, etc.. Allows, with vivimat BUS, the local or remote control of a motorized devices, ensuring
Manual Switches Series 2 Pushbutton Switches and Indicators
BARRIER MOUNT Display screen (page 115) Mounting barrier (next page) Housing (next page) FEATURES Easy-to-assemble modules provide thousands of display/control combinations Up to 4 incandescent lamps 1,
GLOLAB Two Wire Stepper Motor Positioner
Introduction A simple and inexpensive way to remotely rotate a display or object is with a positioner that uses a stepper motor to rotate it. The motor is driven by a circuit mounted near the motor and
Incremental Rotary Encoder E6B2
Incremental Rotary Encoder General-Purpose Rotary Encoder Withstands arge Shaft oads Wide variety of supply voltages and output forms Easy-to-adjust zero index (phase Z) with origin indicating function
Automatic Voltage Regulator User s Manual
Resp. dept. R&D We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden. Copyright
Centro-Matic Automatic Lubrication Systems System Controls
Selecting the right controls for your automated lubrication system is one of the last steps in the design process. Several different models may be chosen to control power-operated pumps, depending on the
Specifications for EM223 24 VDC 4 In/4 Out and EM223 24 VDC 4 In/4 Relay Out
SIMATIC S7-200 EM223 Digital Combination Modules EM223 2 VDC In/ Out and EM223 2 VDC In/ Relay Out Table 1 Specifications for EM223 2 VDC In/ Out and EM223 2 VDC In/ Relay Out EM223 2VDC In/Out 6ES7 2231BF200XA0
RC NETWORKS SALES GUIDE
SALES GUIDE INTRODUCTION TO Recent developments in electronic equipment have shown the following trends: Increasing demands for numerical control machines, robotics and technically advanced appliances
SPEED CONTROL SYSTEM
SPEED CONTROL SYSTEM INDEX SPEED CONTROL MOTOR FEATURES 144 6W ( 70mm) 153 10W ( 70mm) 155 15W ( 80mm) 157 25W ( 80mm) 159 40W ( 90mm) 161 SPEED CONTROL W ( 90mm) 163 90W ( 90mm) 165 120W ( 90mm) 168 180W
THERMAL ANEMOMETRY ELECTRONICS, SOFTWARE AND ACCESSORIES
TSI and TSI logo are registered trademarks of TSI Incorporated. SmartTune is a trademark of TSI Incorporated. THERMAL ANEMOMETRY ELECTRONICS, SOFTWARE AND ACCESSORIES IFA 300 Constant Temperature Anemometry
Air damper actuators
4 634 OpenAir TM Air damper actuators GDB...1 GLB...1 Rotary version, / AC 230 V Electronic motor driven actuators for three-position and modulating control Nominal torque 5 Nm (GDB), 10 Nm (GLB) Mechanically
EMF/EMR. Holder/Release Devices with Integral Door Closers
EMF/EMR Holder/Release Devices with Integral Door Closers EMR TECHNICAL DETAILS DORMA EMR SERIESHOLDER/RELEASE DEVICE The DORMA EMR Series holder/ release device incorporates a photoelectric detector and
Operating Instructions
CS101 CarSense Vehicle Motion Detector Operating Instructions CAUTIONS AND WARNINGS Never use the CS101 as a safety reversing or presence detection system. The CS101 requires that a vehicle be moving for
Owner's Copy. 104873 December 14, 2011 ELECTRICAL INSTRUCTIONS FOR ADVANTEX EA OR EX MODELS
104873 December 14, 2011 Detex Corporation, 302 Detex Drive, New Braunfels, Texas 78130-3045 (830)629-2900 / 1-800-729-3839 / Fax (830)620-6711 E-MAIL: detex@detex.com INTERNET: www.detex.com ELECTRICAL
Moving Magnet Actuator MI FFA series
Moving Magnet Actuator MI FFA series The moving magnet MI-FFA series actuators are a line of actuators designed to be a true alternative for pneumatic cylinders. The actuators incorporate an ISO 6432 interface
Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules
CHIEF EN TERPRISES INC. M a s t e r I n t e r n a t i o n a l D i s t r i b u t o r Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules M AS TER IN
Solid Core and Split Core Adjustable Current Status Switches CSS-O, CSS-C; CSP-O, CSP-C
Solid Core and Split Core Adjustable Current Status Switches CSS-O, CSS-C; CSP-O, CSP-C DESCRIPTION FEATURES PRODUCT DATA Very low operating trip points LED status indication Integral DIN rail mounting
New XUY roller sensors
Do you want to simplify the sensor integration in your conveyor systems? New XUY roller sensors for packet, boxes, letters on roller conveyors. Telemecanique Sensor s OsiSense TM XUY photoelectric sensors
VC Series Zone Valves BALANCED 2-WAY AND 3-WAY HYDRONIC VALVES
VC Series Zone Valves BALANCED 2-WAY AND 3-WAY HYDRONIC VALVES PRODUCT DATA Design VC Series zone valves consist of: 2-way or 3-way valve housing available with various connection ends Spindle and cartridge
How To Drive A Compact Serie 1
Electric lifting cylinder Compact Series Table of Contents Glossary... 2 Compact serie SR 1... 4 Dimension SR 1... 5 Compact Serie SR 1SP... 6 Dimension SR 1SP... 7 Compact Serie SR 5... 8 Dimension SR
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
Lexmark 4037-05E Laser Printer
Lexmark 4037-05E Laser Printer asm_1 Covers asm_2 Left Side Frame asm_3 Frame and Redrive [1 of 2] asm_3a Frame and Redrive [2 of 2] asm_4 Top Cover asm_5 Standard Paper Tray asm_6 Fuser asm_7 Electronics
Tool Turrets and Tool Discs
Our other products Automatic Tool Changer Chucking Cylinders Tool Discs Indexing Tables Tool Turrets and Tool Discs Pragati Automation Pvt. Ltd. 1, IV Phase, 11th Cross, Peenya Industrial Area Bangalore
Electronic Control Devices The European Product Catalogue 2007
FX07 Field Controller (1/4) FX07 Field Controller Display Model Dimensions in mm (inches) The FX07 is a terminal unit controller in the Facility Explorer range of products. The controller is designed specifically
Figure 1 - Crydom 3RHP Three-phase Hybrid Solid State Contactor. Crydom Inc.
Crydom RHP Series 3 Phase Hybrid Solid State Contactor By Paul Bachman Fellow Engineer, Crydom, Inc. ABSTRACT Solid State Relays and Contactors (SSRs) have been available in one form or the other for over
Series 30000 Hose Reels
Operating Instructions and Parts List for Series 30000 Hose Reels - MANUAL DRIVEN - - POWER DRIVEN - SAFETY PRECAUTIONS Personal injury and/or equipment damage may result if proper safety precautions are
Table of Contents. XXII. Motorized Scuttles & fire Vents
Table of Contents XXII. Motorized Scuttles & fire Vents 1. General Notes 2. SV - Single Leaf 3. SV - Double Leaf (Profile) 4. SV - Double Leaf 5. Motorized Acoustical Unit 6. Motorized Acoustical Unit
SMART SENSOR COLLECTION
TEMPERATURE SENSOR This sensor measures temperature in degrees Celsius or Fahrenheit. It works with all SensorHawk base units (SensorHawk-2, SensorHawk-8 and SensorHawk8/20) as well as the SecurityHawk-8
TAC I/NETTM MR-AHU-HP. Application Specific Controller
TAC I/NETTM MR-AHU-HP Both the MR-AHU and MR-HP controllers are application specific controllers (ASCs). The intention of the design is to reduce total install cost through pre-engineered control algorithms
HERZ-Thermal Actuators
HERZ-Thermal Actuators Data Sheet 7708-7990, Issue 1011 Dimensions in mm 1 7710 00 1 7710 01 1 7711 18 1 7710 80 1 7710 81 1 7711 80 1 7711 81 1 7990 00 1 7980 00 1 7708 11 1 7708 10 1 7708 23 1 7709 01
HQ Series ¼ Turn Actuator
HQ Series ¼ Turn Actuator HQ-015 thru HQ-300 Installation & Maintenance Manual HQ Series I&M Manual HQ-400-1005 1 Table of Contents: General 1.0 Actuator Mounting 2.0 External Construction 3.0 Wiring Diagrams
CENTERLINE Motor Control Centers Bulletin 2100 Smoke Detector Unit
Instructions CENTERLINE Motor Control Centers Bulletin 2100 Smoke Detector Unit Catalog Number 2100-SD1 Description The Bulletin 2100 smoke detector unit is a 0.5 space factor unit for use in Bulletin
Electronic, Digital and Mechanical Vibration Switches
PT500 Electro-Mechanical Vibration Switch Introduction The PT500 is an economical solution that provides basic vibration protection for rotating reciprocating machines. The PT500 uses an inertia sensitive