Highly Efficient Glass-Fronted Gas Fires Issue 5. A World of heat you can rely on

Transcription

1 A World of heat you can rely on A collection of glass-fronted gas fires specifically designed for today s homes with or without a chimney Highly Efficient Glass-Fronted Gas Fires Issue 5 A Great British Product

2 More efficient than conventional products Fires working in a chimney draw warm air from the room into the chimney and it is then replaced by cold air from the outside. This air then has to be heated by the fire, reducing efficiency and increasing costs. At-a-glance symbols to help you choose Flues Fuel Beds Control The Paragon Focus range has been scientifically designed to reduce this airflow to a minimum, changing the room air just once per hour against a typical open-fronted gas fire that will change room air up to 12 times per hour. Minimum room air changes combined with superior thermal efficiency achieved by ceramic glass-front technology give this range a new level of efficiency and performance. The Focus range of fires is now available for homes with or without a chimney and the fires are amongst the most efficient designs available. Pre-cast Class I Five Inch (Class II) Coal Pebbles Carrara Remote Slide Manual Control Gas Type Balanced Paragonite Natural Log LPG Typical open-fronted gas fire changes room air up to 12 times per hour. Coal fuel bed Paragonite fuel bed Paragon Focus HE changes room air just once per hour. Pebble fuel bed Carrara marble pebbles fuel bed Paragon s Focus RS range does not produce any air changes per hour, as it is room sealed. Putting you in control Choose from manual, slide or battery-operated remote control, which, unlike with other fires, not only adjusts the flame but lights the fire as well. Manual control Slide control Battery remote control Fuel bed options Log fuel bed Guaranteed quality Designed to the highest standards, using only the finest materials, means we can be confident about every fire we make. So confident, in fact, each fire comes with a 5-year parts warranty.* *Subject to terms and conditions, which you will find on our website. contents Conventional fires Focus HE Slimline 3 Focus HE Multi-Flue 4 Focus HE 6 Focus HE 18" 8 Focus RS Plus 10 Focus RS 18" 12 Hole-in-the-wall fires Quartet CF 14 Conventional flue Quartet Glass CF 15 Conventional flue Symphony CF 16 Conventional flue Chorus CF 17 Conventional flue Quartet Glass BF 18 Balanced flue Symphony BF 19 Balanced flue Trim & Fret Options 20 Optional Fascias 21 Specs & Dimensions 22 2 Paragon glass-fronted catalogue

3 Focus HE Slimline Fits most chimneys and pre-cast flues Conventional fires Now you can have a real fire even where space is limited This attractive Focus Slimline fire is designed to give high efficiency in pre-cast flues and it fits easily into a 1" rebate fireplace. 3.2kW output 75% efficient ceramic glass technology 4 trim styles in up to 4 finishes Coal or pebble fuel bed Suitable for pre-cast flues Slide control option to eliminate the need to bend down to light the fire** Excellent radiant heat output ** Slide control is not available on hole-in-the-wall installations. Focus HE Slimline brass Wellington fret and trim. Shown in Balmoral limestone mantel with LED illumination kit. Focus HE Slimline chrome Gate fret and chrome trim. Shown in Balmoral limestone mantel with LED illumination kit. For specifications refer to the technical datasheet Features: 3

4 Focus HE Multi-Flue Conventional fires Focus HE Multi-Flue with brass Profile trim and brass Gate fret. 4 Paragon glass-fronted catalogue

5 Fits most chimneys Choose the style to suit your home A medium-depth, high-efficiency gas fire that can fit most chimneys and pre-cast flues. Heat and Efficiency A class-leading, highly-efficient, glass-fronted fire that fits in-between the Focus HE Slimline and the Focus HE fires. 3.5kW output 81% efficiency* Ceramic glass technology Comfort and Control Comes in a choice of manual, slide and remote control versions. Manual control concealed behind the ashpan cover The slide control option allows you to operate the fire from the top corner of the fire so there is no need to bend down Looks There are a number of choices that can transform the style and look of the fire: Choice of either coal or pebble fuel beds 5 trim styles in up to 8 different finishes Contemporary hole-in-the-wall fascias Traditional cast-iron fascias Flexible Design Only requires a 4" minimum hearth depth from the wall when floor mounted Can be mounted without a hearth with a 4-sided fascia Class I and II flues Natural gas *Tested to British Standard Focus HE Multi-Flue with piano black Profile trim and fascia shown in Lydbury Neastone mantel. Focus HE Multi-Flue with brass trim and brass Gate fret. Contemporary hole-in-the-wall designs for use with the Focus HE Multi-Flue Solar IV fascia The slim, contemporary profile is enhanced with a simple, modern curved fret to complete the design. There is a choice of battery remote or easy-to-use manual controls situated behind the ashpan cover. In graphite This beautifully proportioned, hole-in-thewall fire is available in the most contemporary of colour trims graphite. The subtle colour option gives the Solar IV a new elegance and design originality. In brushed stainless steel A superb hole-in-the-wall fire, featuring a 4-sided brushed stainless-steel trim, ceramic glass window and life-like flames. Solar III fascia This can be fitted on the whole Focus range either in brushed stainless-steel, graphite or brass. Now available with a slide control. A mini hearth is required for hole-in-the-wall mounting. Graphite 4-sided Brushed stainless-steel 4-sided Brass 3-sided Brushed stainless-steel 3-sided Graphite 3-sided For specifications refer to the technical datasheet Features: 5

6 Focus HE Conventional fires Gas fires with the new panoramic glass front Focus HE brass trim with antique Tulip fret. Shown with coal fuel bed. Focus HE in Cast trim and fret with coal fuel bed. Shown in a Fireline Aylesbury surround in Portuguese limestone. Contemporary designs offering efficient heating for homes with a chimney, to fit either hole-in-the-wall or mantel fireplaces. Heat and efficiency The new full-length glass window gives class-leading thermal efficiency. 4.4kW output 89% efficiency Ceramic glass technology Comfort and control Manual control concealed behind ashpan cover New, easy-to-operate slide lever control available to end the need to bend down to light the fire The ultimate luxury full sequential remote control, the last word in ease of operation it even lights the pilot each time to save gas Looks This fire can take on many different styles: Two fuel beds coal or pebble 5 trim styles in up to 8 finishes 5 contemporary hearth and hole-in-the-wall fascias Pixilated edge glass for clean, neat styling Flexible design Only requires a 4" minimum hearth depth from wall when floor mounted Can be mounted without a hearth with a 4-sided fascia Suitable for both Class I and 5" flue Natural gas or LPG Focus HE black Gate and trim. Shown with pebble fuel bed. For the complete range of trim and fret options available, see pages Focus HE in brushed stainless-steel Solar III fascia on hearth. Shown with pebble fuel bed. 6 Paragon glass-fronted catalogue

7 Fits most chimneys Focus HE with chrome trim & Gate fret. Shown in Wroxeter limestone surround. Fascias for the Focus HE Contemporary hole-in-the-wall designs Solar IV fascia The slim, contemporary profile is enhanced with a simple, modern curved fret to complete the design. There is a choice of battery remote or easy-to-use manual controls situated behind the ashpan cover. Solar III fascia This can be fitted on the whole Focus range either in brushed stainless steel, graphite or brass. Now available with a slide control. A mini hearth is required for hole-in-the-wall mounting. Solar IV graphite fascia. Shown with pebble fuel bed. In graphite This beautifully proportioned, hole-in-the-wall fire is available in the most contemporary of colour trims graphite. The subtle colour option gives the Solar IV a new elegance and design originality. In brushed stainless-steel A superb hole-in-the-wall fire, featuring a 4-sided brushed stainless-steel trim, ceramic glass window and life-like flames. Solar IV brushed stainless-steel fascia. Shown with pebble fuel bed. Solar III brass fascia. Shown with coal fuel bed. Please note: The marble slips shown are not included with the fire but suitable slips are recommended to minimise heat transfer to the wall. Available from Paragon are marfil stone and black granite slips. For specifications refer to the technical datasheet Features: 7 Not available for use with the Solar IV

8 Focus HE 18" Conventional fires Focus HE 18 inch with brass trim & Antique Bridge fret. Shown in Radnor limestone surround. An extra-wide inset fire giving an exceptional fuel bed and flame Now you can make the most of your fireplace with these stunning 18" wide traditional inset fires from Paragon. 18 inch wide fires had become a thing of the past due to the large gas input needed to get a decent flame, which also meant you needed additional ventilation in your room. The Focus HE gets around these problems with a fire that is designed to give a superb realistic flame picture from a modest 5.7kW input, meaning there is no need for additional ventilation. 5.7kW input, no need for added ventilation 4.4kW output 89% efficiency Extra-wide fuel bed and flame Suitable for both Class I and Class II flues Full sequence infra-red remote control that lights the pilot light as well as the fire, saving energy and carbon emissions Manual control also available Traditional or hole-in-the-wall installation Trim options: brass or chrome standard trims, brass, graphite or brushed stainless-steel 3-sided Solar trims and graphite or brushed stainless-steel 4-sided Solar trims (for hole-in-the-wall fitting) Fret options: brass, antique or chrome Blenheim and brass or EPNS (Electro- Plated Nickel Silver) Gate frets Two fuel beds coal or pebble 8 Paragon glass-fronted catalogue

9 Fits most chimneys 89% efficiency Focus HE 18inch with chrome trim & chrome Antique Bridge fret. Shown in Stokesay limestone surround. Focus HE 18 with brass Gate fret and trim, shown with coal fuel bed. Focus HE 18" with EPNS Gate fret and chrome trim, shown with pebble fuel bed. For specifications refer to the technical datasheet Features: 9

10 Focus RS Plus Conventional fires Choose the look to suit your room Focus RS Plus brass trim with brass Gate fret. Shown with coal fuel bed. Focus RS Plus with chrome Cast fascia. Shown in Stonehenge limestone surround. One of the most efficient balanced-flue fires on the market The award-winning Paragon RS Plus was a trail blazer in putting the fire back into the fireplace rather than in front of it. The next-generation Focus RS Plus has been designed to build on this excellent foundation. Heat and efficiency 4.4kW output 85% efficiency Meets the European Class One energy efficiency standard Comfort and control This fire may be specified with either: Manual control concealed behind ashpan cover Slide control also available (on natural gas models only) The ultimate luxury full sequential remote control, the last word in ease of operation it even lights the pilot each time to save gas Looks The Focus RS Plus can take on many different styles: 2 fuel beds: coal and pebble 5 trim styles in up to 8 finishes Contemporary hole-in-the-wall and hearth-mounted fascias Pixilated edge glass for clean, neat styling Focus RS Plus brass trim with brass Tulip fret. Shown with coal fuel bed. Flexible design Only requires a minimum of 4" hearth depth from the wall if floor mounted Can be mounted without a hearth using a 4-sided fascia Can be mounted in up to 1.18 metre thick wall. This makes it the fire of choice for houses where the chimney has either failed or been removed at roof level. For the complete range of trim and fret options available, see pages Paragon glass-fronted catalogue

11 Balanced flue not for chimneys Focus RS Plus chrome trim and Gate fret. Shown with pebble fuel bed. Focus RS Plus black trim with black Gate fret. Shown with pebble fuel bed. Focus RS Plus in Chirbury Performance cast. Shown in Wroxeter limestone surround. Specifically designed for hole-in-the-wall installation with a balanced flue The Focus RS Plus Solar IV fascia The slim, contemporary profile is enhanced with a simple, modern curved fret to complete the design. There is a choice of battery remote or easy-to-use manual controls situated behind the ashpan cover. In graphite This beautifully proportioned, holein-the-wall fire is available in the most contemporary of colour trims graphite. The subtle colour option gives the Solar IV a new elegance and design originality. In brushed stainless-steel A superb hole-in-the-wall fire, featuring a 4-sided brushed stainless-steel trim, ceramic glass window and life-like flames. For cavities less than 75mm, depending upon thickness of inner leaf of wall materials, additional thickness, ie: slips, will be required. This is also recommended to minimise heat transfer to the wall. Please note: The marble slips shown are not included with the fire but suitable slips are recommended to minimise heat transfer to the wall. Available from Paragon are marfil stone and black granite slips. Focus RS graphite Solar IV. Shown with pebble fuel bed. Fascias for the Focus RS Plus For specifications refer to the technical datasheet Features: 11

12 Focus RS 18" Conventional fires Focus RS 18 with brass Gate fret and trim, shown with coal fuel bed. An extra-wide balanced-flue inset fire Combining one of our most efficient balanced-flue fires with an extra-wide inset to create the Focus RS 18" Forget preconceptions of past 18" fires, which required a large gas input, our award-winning Paragon Focus RS has an extra-wide inset, giving an exceptional fuel bed and flame without the need for additional ventilation. Trim options: brass or chrome standard trims, brass, graphite or brushed stainless-steel 3-sided Solar trims and graphite or brushed stainlesssteel 4-sided Solar trims (for hole-in-thewall fitting) Focus RS 18" with a brass trim and Gate fret. Shown with a coal fuel bed. 5.2kW input 3.9kW output 85% efficiency Extra-wide fuel bed and flame Two fuel beds coal or pebble Fret options: brass, antique or chrome Blenheim and brass or EPNS (Electro- Plated Nickel Silver) Gate frets Manual control or full sequence infra-red remote control Traditional or hole-in-the-wall-installation 12 Paragon glass-fronted catalogue

13 Fits most chimneys 85% efficiency Focus RS 18" with chrome trim and EPNS Gate fret. Shown with a pebble fuel bed. For specifications refer to the technical datasheet Features: 13

14 Quartet CF Hole-in-the-wall fires A new design from Paragon, setting the standard in efficiency for hole-in-the-wall fires. The stunning Quartet conventional flue from Paragon offers a stylish mid-sized hole-in-the-wall gas fire that will enhance any modern living room and produces 84% efficiency. The Quartet CF has all the look and feel of the popular landscape openfronted gas fires, but at the same time is an extremely impressive 84% efficient to meet today s conscientious customer demands. Brushed stainless-steel outer and black inner trim with Carrara marble pebbles fuel bed. Because of the size of the Quartet CF, it can be installed in fireplaces with low lintels and still offer good ground clearance for that desirable hole-in-the-wall look. Choose either a log bed or a pack containing both Paragonite stone & Carrara marble. 3.2kW output 84% efficiency Full sequence infra-red remote control that lights the pilot light as well as the fire, saving energy and carbon emissions Glass-fronted high efficiency Outer trim options: polished stainless-steel or brushed stainless-steel Inner trim options: graphite or black Suitable for both Class I and Class II flues Polished stainless-steel outer and graphite inner trims with Paragonite fuel bed. Fuel bed options for Quartet CF Choose either a log bed or a pack containing both Paragonite stone & Carrara marble. Paragonite fuel bed. Carrara marble pebbles fuel bed. Log fuel bed. 14 Features: For specifications refer to the technical datasheet

15 Quartet Glass CF For class I & II flues Quartet Glass CF with log fuel bed. A stylish and modern hole-in-the-wall fire for use in a traditional chimney breast The Quartet Glass CF hole-in-the-wall gas fire offers all the design and style of the fashionable continental fires but is a conventional flue fire. This means it can be fitted into a traditional chimney breast and does not need extensive building work to fit. 4.2kW input 3.2kW output 84% efficiency Suitable for both Class I and Class II flues Full sequence infra-red remote control that lights the pilot light as well as the fire, saving energy and carbon emissions Hole-in-the-wall installation Trim option: curved black glass fascia Fuel bed options for Quartet Glass CF Choose either a log bed or a pack containing both Paragonite stone & Carrara marble. Paragonite fuel bed. Carrara marble pebbles fuel bed. Log fuel bed. For specifications refer to the technical datasheet Features: 15

16 Symphony CF Hole-in-the-wall fires Now available with a 3-sided trim for hearth mounting Black Ceres 3-sided trim for hearth mounting. Symphony CF The new Paragon Symphony conventional flue is a large contemporary fire for hole-in-the-wall or fireplace installation. Polished stainless-steel outer/black inner trim for hole-in-the-wall application. Like the Quartet, the glass-fronted Symphony CF has the look and feel of the popular landscape open-fronted fires, but at the same time is an extremely impressive 84% efficient to meet today s conscientious customer demands. The Symphony is the ultimate combination of style, design and efficiency, setting a new standard in gas hole-in-the-wall fires. A log-effect fuel bed with embers and bark provides a very realistic and warming flame. Brushed stainless-steel outer/graphite inner trim for hole-in-the-wall application. Chrome Ceres 3-sided trim for hearth mounting. 16 Features: For specifications refer to the technical datasheet

17 Chorus CF For class I & II flues Chorus CF with log fuel bed. A large deep fire that adds presence to any modern interior The Chorus is a taller version of the Quartet fire, giving an even more impressive tall flame. Again, this fire can be fitted into a standard chimney breast and does not need extensive building work. 5.5kW input 4.2kW output 84% efficiency Suitable for both Class I and Class II flues Full sequence infra-red remote control that lights the pilot light as well as the fire, saving energy and carbon emissions Hole-in-the-wall installation Trim option: curved black glass Chorus fascia Fuel bed: log For specifications refer to the technical datasheet Features: 17

18 Quartet Glass BF Hole-in-the-wall fires 86% efficiency Quartet Glass BF fitted as hole-in-the-wall fire. Log fuel bed Stunning looks and performance The Quartet Glass balanced flue hole-in-the-wall fire offers everyone the chance of having a state-of-the-art modern fire in their home. Having a balanced flue means that the fire can be situated on any exterior wall with no requirement to have a chimney breast. Along with its stunning good looks, the Quartet Glass BF also offers a performance of 86% efficiency. Fuel bed for Melody BF The Quartet Glass BF uses a highly developed bespoke burner system that maximises the flame picture from its minimal 3kW input, giving a visual effect at a much lower running cost. Paragonite is also available as an optional extra. Comes supplied with a Carrara marble pebbles fuel bed. 18 Features: For specifications refer to the technical datasheet

19 Symphony BF For class I & II flues Also available for use with a range of mantels Symphony a fusion of innovation, style and efficiency The Paragon Symphony, balanced-flue fire is an idea that moves a concept to another level. Large balanced-flue fires like this have been made before, but until now they have involved a false chimney breast being built to contain the flue. The Symphony BF removes the need for this and can be installed on any suitable outside wall in a fireplace of the correct rebate. This is but one of many innovative ways of installing it in your home. It can be flued vertically as a new installation or retro-fitted through a disused chimney breast. If there is no suitable outside wall, the fire can be sited up to 5 metres from an external wall and still give you the unrivalled safety and efficiency of a room-sealed balanced-flue fire. For full details of flue options, ask your dealer for more information. Symphony BF shown in polished stainless-steel/black trim for hole-in-the-wall application. Traditional or hole-in-the-wall installation 90% efficiency - meets the European Class One energy efficiency standard Ultra-realistic logs with embers and bark, providing soft relaxing flames Can be rear flued in deep rebate mantel to avoid false chimney breast A choice of inner and outer trims (see page 21 for more details) Fire can even be mounted across the corner of the room 4.5kW output Flexible installation Full remote control Fire mounted in false chimney. Fire mounted across corner of room. Rear flued in deep rebate mantel, avoiding false chimney breast. For specifications refer to the technical datasheet Features: 19

20 Trim & Fret options Choose the perfect trim & fret for your fire Conventional fires Fret options Standard fire trim options * * * Wellington brass Wellington antique Brass * Brushed stainless-steel Chrome Black Wellington EPNS Wellington black * denotes also available for Focus HE and RS 18" Contrast fire trim options Tulip brass Tulip antique * Contrast brass Contrast chrome Contrast brushed stainless-steel Cast fascia options Tulip black Gate brass * Brass Black Chrome Not suitable for the Focus HE Slimline Profile trim and fascia options Gate Chrome Gate black * * Chrome fascia or trim Piano black fascia or trim Brass trim only Manual and remote control only. To use the fascias on glass fronted fires the fret top plate must be removed Brass Antique Bridge Chrome Antique Bridge 20 Paragon glass-fronted catalogue

21 Conventional & hole-in-the-wall fires Solar IV trim options Focus HE Multi-Flue, RS, HE, HE 18" and Slimline only Choosing the right fire for your lifestyle Suitable flue types Graphite 4-sided Solar III trim options Focus HE Multi-Flue, RS, HE, HE 18" and Slimline only Brass 3-sided Ceres trim options Symphony Only 3-sided black Brushed stainless-steel & black Brushed stainless-steel 4-sided Brushed stainless-steel 3-sided Quartet trim CF options: 3-sided chrome Polished stainlesssteel & graphite or a combination of the two Symphony CF and BF trim options: Solar IV Featuring a unique 4-sided trim that is laser profiled from a single sheet of metal to make it mitre free. Designed for installation as hole-inthe-wall fires. Graphite 3-sided Solar III The Solar III is designed for installation on a conventional fire Chimney Pre-fabricated flue Pre-cast flue No chimney or flue A brick chimney (Class 1) is recognised by a chimney stack with accompanying terracotta pot or gas terminal. Suitable for the Focus HE Multi-Flue, Focus HE, Focus Slimline, Quartet CF, Symphony CF and Chorus CF. A pre-fabricated flue has a metal flue and terminal. Suitable for the Focus HE, Focus Slimline, Quartet CF and Symphony CF. A pre-cast flue can be identified by a ridge vent or metal flue tube and terminal. Suitable for the Focus Slimline in certain circumstances, but additional building work will be required. No chimney or flue if you have nothing on your roof, you probably have no chimney or flue. In this case, a balanced flue will usually suit this situation when positioned on a suitable outside wall. Suitable for the Focus RS, Quartet BF and Symphony BF. Due to the vast number of varying flue types, your existing fire may need to be removed to confirm your flue type and product suitability. All chimneys and flues should be regularly checked for debris and efficiency and swept where appropriate. Chimneys and flues, even if properly constructed, can suffer from unexpected problems that cannot always be detected prior to installation. For this reason, the smoke test outlined in the fitting instructions must always be completed prior to and after installation of any gas fire. Brushed stainlesssteel & graphite Polished stainlesssteel & black or a combination of the two Please note: Paragon Fires policy is one of constant development and improvement. Paragon Fires therefore reserves the right to revise the specification and design of its fires without formal notice. This brochure is not intended to replace the need to view the appliance before purchasing

22 Specifications and dimensions Focus HE/Focus HE 18" * Focus RS Plus 280 Min Max may require extra flue length Focus HE Multi-Flue Solar III 16" fascia/ 18" fascia 502/ /563 Solar IV 16" fascia/ 18" fascia Ceres fascia Focus HE Slimline Quartet Glass CF 22 Paragon glass-fronted catalogue

23 Symphony BF rear 488mm above base on CL A B C D E Symphony CF/Quartet CF** Chorus CF Quartet Glass BF This is maximum flue length possible Max opening width Min opening width Max opening height Min opening height Min opening depth Min height for combustible shelf Min hearth depth Min height from floor for no hearth Model Conventional fires Focus HE Focus HE Multi-Flue Focus HE Slimline Focus RS Plus Focus HE 18" Focus RS 18" Hole-in-the-wall fires Symphony CF Symphony BF Quartet CF N/A 50 Quartet Glass CF N/A 50 Quartet Glass BF N/A 150 Chorus CF N/A 50 Heat Inputs, Outputs and Efficiency Input Net Output (up to) NG LPG Efficiency NG LPG Conventional fires Focus HE high 5.5kW 5.1kW 89% 4.4kW 4.0kW low 2.4kW 2.7kW 70% 1.7kW 1.9kW Focus HE high 4.8kW N/A 81% 3.5kW N/A Multi-Flue low 2.4kW 72% 1.6kW Focus high 5.4kW 4.9kW 85% 4.3kW 3.9kW RS Plus low 2.4kW 2.4kW 57% 1.38kW 2kW Focus high 4.2kW N/A 75% 3.2kW N/A HE Slimline low 2.4kW 65% 1.5kW Focus high 5.7kW N/A 89% 4.4kW N/A HE 18" low 3kW 70% 2.3kW Focus high 5.2kW N/A 85% 3.9kW N/A RS 18" low 3kW 78% 2.4kW Hole-in-the-wall fires Symphony high 5kW N/A 90% 4.5kW N/A BF low 2.4kW 1.8kW Symphony high 5.5kW N/A 84% 4.2kW N/A CF low 2.2kW 70% 1.5kW Quartet CF high 4.2kW N/A 84% 3.2kW N/A low 2.4kW 1.7kW Quartet Glass high 4.2kW N/A 84% 3.2kW N/A CF low 2.4kW 70% 1.7kW Quartet Glass high 3kW N/A 86% 2.3kW N/A BF low 2.4kW 78% 1.87kW Chorus CF high 5.5kW N/A 84% 4.2kW N/A low 2.2kW 70% 1.5kW All Paragon gas fires are manufactured under a BS EN ISO 9001 quality system (registration number 5195), which covers all areas of product design, development, manufacture and service. 23

24 A World of heat you can rely on Paragon Fires, A division of Charlton & Jenrick Ltd, Unit D, Stafford Park 2, Telford, Shropshire TF3 3AR Tel: [email protected] Mantels supplied by Katell and Fireline All Paragon gas fires are manufactured under a BS EN ISO 9001 quality system (registration number 5195), which covers all areas of product design, development, manufacture and service. Please note: Our policy is one of constant development and improvement. Paragon Fires therefore reserves the right to revise the specification and design of its fires without formal notice. This leaflet is presented as a guide to aid in your decision and does not replace the need of technical assessment by your dealer. Whilst the utmost care is taken in preparation of this leaflet, it is not intended to replace the installation manual, which provides more detailed information. Photography is for illustration purposes only and does not replace the need to see the fire in a showroom. We accept no liability for any loss or damage arising either directly or indirectly from the use of this leaflet. Designed and produced by 3sixty Creative Marketing Solutions J/0608