CK548000TX. Amherst Cocktail Table Trunk. Assembly Instructions PO#: Page 1

Transcription

1 CK548000TX Amherst Cocktail Table Trunk Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service: PO#: Page 1

2 Amherst Cocktail Table Trunk Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage. 1. Quantity 2. Quantity 3. Quantity Top Panel 4. Quantity Left Side Panel 5. Quantity Right Side Panel 6. Quantity Front Panel 7. Quantity of 4 Back Panel Bottom Panel Legs A. Quantity 8 B. Quantity 8 C. Quantity Cam Bolts Cam Locks Wood Dowels Ø 8mm x 30mm Page 2

3 D. Quantity E. Quantity F. Quantity Left-Arm Hinge G. Quantity Right-Arm Hinge H. Quantity Screw Ø 1/8 x 1/2 L I. Quantity of 2 Bolts Ø 1/4 x2-3/4 L J. Quantity 6 Allen Wrench 1/4 K. Quantity Hinges L. Quantity of 3 Screws Ø 1/8 x 5/8 L Cotton Mats Adhesive Pads Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the surface with rough or abrasive objects. For replacement parts or questions, please call Customer Service at Assembly Tool Required No.2 Phillips Screwdriver (Not Included) Page 3

4 Amherst Cocktail Table Trunk Assembly Instructions Start screwing with fingers to help align Cam Bolts. Screw Cam Bolts (A) into corresponding holes on Left and Right Side Panels (2 & 3). Attach Left Side Panel (2) and Right Side Panel (3) to Bottom Panel (6) by inserting Cam Bolts (A) into corresponding holes. Insert Cam Locks (B) into holes on Bottom Panel (6). Tighten by rotating Cam Locks (B) clockwise with Phillips screwdriver. Figure 1 Screw Cam Bolts (A) and insert Wood Dowels (C) into holes on Front Panel (4). Attach Front Panel (4) to assembled unit by inserting Cam Bolts (A) and Wood Dowels (C) into corresponding holes. Insert Cam Locks (B) into holes on Bottom Panel (6), Left Side Panel (2) and Right Side Panel (3). Tighten by rotating Cam Locks (B) clockwise with Phillips screwdriver. Cover Cam Locks (B) with Cotton Mats (K) as shown. Figure 2 Page 4

5 Screw Cam Bolts (A) and insert Wood Dowels (C) into holes on Back Panel (5). Attach Back Panel (5) to assembled unit by inserting Cam Bolts (A) and Wood Dowels (C) into corresponding holes. Insert Cam Locks (B) into holes on Bottom Panel (6), Left Side Panel (2) and Right Side Panel (3). Tighten by rotating Cam Locks (B) clockwise with Phillips screwdriver. Cover Cam Locks (B) with Cotton Mats (K) as shown. Figure 3 H G Attach Legs (7) to Bottom Panel (6) using Bolts (G). Tighten Bolts with Allen Wrench (H) as shown. Figure 4 Page 5

6 Attach Hinges (I) to Back Panel (5) and Top (1) using Screws (J). Open Top (1), attach Arm Hinges (D/E) to Top (1) and trunk base using Screws (F). Tighten Screws with Phillips screwdriver. Place Adhesive Pads (L) on top corners of Front Panel (4) as shown. Close Top (1) and let it drop down slowly. Figure 5 Now your Amherst Cocktail Table Trunk is ready to use! Figure 6 Page 6

7 Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. For product issues, please contact Southern Enterprises at (toll-free) / (Dallas), Mon-Fri 9am 4pm CST, or us at [email protected]. Please ask for customer service representative for issues involving damages or replacement parts. Please ask for technical assistance representative for any issues with product and assembly/construction. Please contact the retailer that you purchased from for returns. Customer Service: [email protected] Southern Enterprises, Inc. 600 Freeport Parkway, Suite 200 Coppell, Texas Page 7