SEQUEL ASSEMBLY INSTRUCTIONS Compact Desk

Size: px

Start display at page:

Download "SEQUEL ASSEMBLY INSTRUCTIONS. 6003 Compact Desk CUSTOMERSERVICE@BDIUSA.COM"

Giles Simmons
7 years ago
Views:

1 BIUSA.COM Component List Sequel is engineered for easy assembly. Carefully follow this procedure to prevent any damage. A - 4mm Hex Wrench B - 1/4-20 x 12 mm Flat Head Machine Screw x 6 Placement and Maintenance Sequel Home Office Furniture is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth. CAUTION: o not use power tools for assembly of this product. C - Leveler Glide x 4-1/4-20 x 12 mm Machine Screw x 12 E - 1/4-20 x 61 mm Machine Screw x 5 F - Adhesive Magnet x 4 G - Leg Brackets x 2 H - Left Leg x 1 I - Right Leg x 1 J - rawer Assembly x 1 K - Upper Horizontal Beam x 1 L - Lower Horizontal Beam x 1 M - Glass Top x 1 N - Front Kick Panel x 1 O - Back Panel x 1 (Sequel 6008 sold seperately) P - rawer Liner x 1 K M I O P G J G L H N esigned by Matthew Weatherly These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws. BI and 'Sequel' are trademarks of Becker esigned, Inc. All Rights reserved BI Made in Taiwan. Revision:

Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth. CAUTION: o not use power tools for assembly of this product.

2 Step 1 Choose rawer Position - Left or Right Sequel features a Left or Right rawer position. For Left rawer Position, install Leg Brackets (G) onto Left Leg (H). For Right rawer Position, install Leg Brackets (G) onto Right Leg (H). To Remove rawer Open rawer fully and press levers, 1 up and 1 down, on both sides of rawer, and pull rawer out. Left rawer Position Install Leg Brackets (G) onto Left Leg (H) Right rawer Position Install Leg Brackets (G) onto Right Leg (I) Step 2 Attach Leg Brackets to Leg Identify Left and Right Legs. Attach Leg Brackets (G) to Left or Right Legs depending on rawer Position. Attach Leg Brackets (G) using Screws (B) and tighten with Hex Wrench (A). G B Leg Bracket (G) Right Leg (I) Step 3 Install Leveler Glides Install Leveler Glides (C) into the bottom of Left Leg (H) and Right Leg (I). Left Leg (K) Foam Strip Faces Inside C Leveler Glide (C) Leveler Glide (C) 2 BIUSA.COM CUSTOMERSERVICE@BIUSA.COM

Left rawer Position Install Leg Brackets (G) onto Left Leg (H) Right rawer Position Install Leg Brackets (G) onto Right Leg (I) Step 2 Attach Leg Brackets to Leg Identify Left and Right Legs.

3 Step 4 Attach Legs With rawer Assembly (J) upside down, Attach Leg with Leg Brackets (G) to rawer Assembly (J) using Screws (B) and tighten with Hex Wrench (A). Attach Leg without Leg Brackets to rawer Assembly (J) using Screws () and tighten with Hex Wrench (A). B Leveler Glides (C) Foam Strips Face Inside Recommended 2-person Step rawer Assembly (J) Upside own with rawer Bottom Facing Up If necessary, remove rawer and flip over for correct position See detail in Step 1 for rawer removal. Step 5 Attach Upper Horizontal Beam Attach Upper Horizontal Beam (K) to inside of Left and Right Legs using Screws () and tighten with Hex Wrench (A). Make certain 3 slots in Upper Horizontal Beam (K) face toward Leveler Glides (C). Upper Horizontal Beam (K) Leveler Glides (C) rawer Assembly (J) 3 BIUSA.COM CUSTOMERSERVICE@BIUSA.COM

B Leveler Glides (C) Foam Strips Face Inside Recommended 2-person Step rawer Assembly (J) Upside own with rawer Bottom Facing Up If necessary, remove rawer and flip over for correct position See

4 Step 6 Attach Lower Horizontal Beam Attach Lower Horizontal Beam (L) to inside of Left and Right Leg using Screws () and tighten with Hex Wrench (A). Turn unit over. L L Short side of Lower Horizontal Beam (L) faces front of esk Recommended 2-person Step Step 7 Attach Glass Top With the help of another person, gently lower Glass Top (M) onto rawer Assembly (J). Fasten Glass Top (M) using Screws (E) and tighten with Hex Wrench (A). O NOT OVERTIGHTEN! Glass Top (M) Glass Top (M) E E 4 BIUSA.COM CUSTOMERSERVICE@BIUSA.COM

L L Short side of Lower Horizontal Beam (L) faces front of esk Recommended 2-person Step Step 7 Attach Glass Top With the help of

5 Step 8 (optional) Attach Magnets to AC power strip/surge protector Remove Adhesive Magnets (F) from the Upper Horizontal Beam (K). Peel film from side of the Adhesive Magnets (F) and attach to clean, dry back side of AC power strip (not included). Cleaning of power strip surface with rubbing alcohol will ensure best adhesive bond. Adhesive Magnet (F) CAUTION: UNPLUG POWER STRIP FROM POWER SOURCE BEFORE CLEANING Adhesive Magnet (F) Step 9 (optional) Attach Power Strip / Surge Protector Attach AC power strip /surge protector to inside of Upper Horizontal Beam (K) as shown in illustration below. Use the slot holes provided to run all wires to and from the desk. Keep all wires inside Upper Horizontal Beam (K) to allow proper attachment of Front Kick Panel (N) and/or optional Back Panel (O). Upper Horizontal Beam (K) 5 BIUSA.COM CUSTOMERSERVICE@BIUSA.COM

Cleaning of power strip surface with rubbing alcohol will ensure best adhesive bond. Adhesive Magnet (F) 1. 2.

6 Step 10 Install Front Kick Panel Place esk in desired location. Once all of the electrical wires are routed, install Front Kick Panel (N) as shown. Insert bottom edge of Front Kick Panel (N) into Lower Horizontal Beam (L). Tilt Front Kick Panel (N) back until magnets hold panel in place. With the grippy side facing down, insert rawer Liner (P) into the rawer. Note: The Sequel esk is designed to permit placement in front of an electrical outlet for easier wiring access. rawer Liner (P) Front Kick Panel (N) Lower Horizontal Beam (L) Step 11 (optional) Attach Back Panel Back Panel (O) Sequel 6008 (sold seperately) is designed to conceal wire management if desk is located in the middle of a room. Insert bottom edge of Back Panel (O) into Lower Horizontal Beam (L). Tilt Back Panel (O) foward until magnets hold panel in place. Top edge of Back Panel (O) is angled Back Panel (O) Sequel 6008 (sold seperately) Lower Horizontal Beam (L) 6 BIUSA.COM CUSTOMERSERVICE@BIUSA.COM

With the grippy side facing down, insert rawer Liner (P) into the rawer. Note: The Sequel esk is designed to permit placement in front of an electrical outlet for easier wiring access.

Triple Threat 3-in-1 Game Table 3 IN 1 GAME TABLE

Triple Threat 3-in-1 Game Table 3 IN 1 GAME TABLE NG0M Triple Threat 3-in- Game Table 3 IN GAME TABLE Thank 3 in Y Game Table Thank you for your purchase of our product. We work around the clock and around the globe to ensure that our products maintain