STANDARD TEST METHODS REFERENCE CHART
|
|
|
- Violet Park
- 9 years ago
- Views:
Transcription
1 VpCI-125 Bio ASTM D 257 (Surface Resistivity) ASTM D (Tensile Strength/Elongation) ASTM D (Elmendorf Tear Strength) ASTM D (Puncture resistance) ASTM F-3429 (Water Vapor Transmission Rate) ASTM D-3985 (Oxygen Transmission Rate) VpCI-125 ASTM B-257 (Surface Resistivity) ASTM D (Tensile Strength/Elongation) ASTM D (Elmendorf Tear Strength) ASTM D (Puncture resistance) ASTM F-3429 (Water Vapor Transmission Rate) ASTM D-3985 (Oxygen Transmission Rate) VpCI-126 Blue ASTM D-882 (Tensile Strength at Break/Peak) ASTM D-882A (% Elongation at Break) ASTM D-1922 (Tear Test) ASTM D-3420 (Puncture Resistance) VpCI-129 VpCI-144 VpCI-145 ASTM D-1709 (Dart Impact Condition) ASTM D-882 (Tensile Strength at Yield/Failure, Secant Modulus Flex, Elongation) ASTM D-1922 (Elmendorf Tear) ASTM D-1894 (Coefficient of Friction) ASTM E-96 (Water Vapor Transmission) TAPPI T-410 (Basis Weight) TAPPI T-411 (Caliper thickness, Tear) TAPPI T-494 (Dry Tensile/TEA) TAPPI T-404 (Stretch) TAPPI T-530 (Ink Float) TAPPI T-538 (Smooth) TAPPI T-541 (Internal Bond) TAPPI T-476 (Abrasion) TAPPI T-448 (WVTR) ASTM B-257 (Surface Resistivity) TAPPI T-410 (Basis weight) TAPPI T-411 (Caliper thickness, Tear) TAPPI T-538 (Smoothness) Stestmethod.doc Page 1 of 16 Issue: February 7, 2006
2 VpCI-146 VpCI-324 VpCI-325 VpCI-344 VpCI-345 VpCI-347 VpCI-365 VpCI-367 TAPPI T-410 (Basis Weight) TAPPI T-411 (Caliper thickness, Tear) TAPPI T-538 (Smoothness) ASTM D-445 (Kinematic Viscosity) ASTM D-2161 (Saybolt Viscosity) ASTM D-1748 (Humidity Chamber) ASTM D-130 (Copper Strip Corrosion) ASTM D-971 (Interfacial Tension of Oil Against Water) ASTM G-53 (Cyclic Ultraviolet/Humidity Exposure) ASTM D (Test Method for Iron Chip Corrosion for Water soluble Metalworking Fluids) ASTM D (Test Method for Iron Chip Corrosion for Water soluble Metalworking Fluids) ASTM D-2783 (Shell 4-Ball EP Test) ASTM D-2266 (Shell 4-Ball Wear Test) Tapping Torque Test ASTM D-3960 (Volatile Organic Compound content) Stestmethod.doc Page 2 of 16 Issue: February 7, 2006
3 VpCI-368 D VpCI-368 FD VpCI-368 HB VpCI-368 M VpCI-368 VpCI-369 M VpCI-369 VpCI-369 D ASTM G-85-7 (Prohesion) Stestmethod.doc Page 3 of 16 Issue: February 7, 2006
4 VpCI-372 OF ASTM D-2196 (Viscosity) VpCI-372 VpCI-373 VpCI-374 VpCI-377 VpCI-383 VpCI-385 ASTM D-2196 (Viscosity) ASTM D-1748 (Humidity) ASTM G-85 A5 (Prohesion) ASTM D (Test Method for Iron Chip Corrosion for Watersoluble Metalworking Fluids) VpCI-386 Aluminum VpCI-386 FR ASTM D (Fire Retardant Paint Test, 2-Foot Tunnel Method) VpCI-386 Stestmethod.doc Page 4 of 16 Issue: February 7, 2006
5 VpCI-387 VpCI-388 VpCI-389 VpCI-390 VpCI-391 VpCI-393 VpCI-395 VpCI-396 ASTM G85-94 (Prohesion) DIN (Humidity Cabinet) ASTM G-53 (QUV resistance) Stestmethod.doc Page 5 of 16 Issue: February 7, 2006
6 VpCI-422 VpCI-609 VpCI-619 ASTM F (Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments) EPA 600/ (Biodegradability) OECD (Organization for Economic Cooperation and Development) Toxicological Testing Bioaccumulation Potential Toxicological Testing (in accordance with Oslo-Paris commission protocol) VpCI-629/629 SC NACE TM (Protection coefficient) Wheel Oven Test VpCI-629 Bio NACE TM (Protection coefficient) Wheel Oven Test Emulsion Tendency Dynamic circuit test 40 CFR 136 (Biodegradability testing) EPA/600/4-90/027F (Toxicity testing) VpCI-637/637 GL NACE ID 182 (Wheel Test) ASTM G (Rotating Cylinder Electrode test) Methyldiethanolamine Foaming Test VpCI-639 NACE TM (Protection Coefficient) VpCI-705 Bio ASTM D (Rust Test) VpCI-705 ASTM D (Rust Test) General Motors Corporation Approved Part N EPA Identification # Stestmethod.doc Page 6 of 16 Issue: February 7, 2006
7 MCI-2005/MCI-2005 NS NSF Standard 61 (Portable water applications approval) by UL MCI-2006/MCI-2006 NS NSF Standard 61 (Portable water applications approval) by UL MCI-2007 Liquid Super Corr ASTM C 494 Type G (High Range water reducing/retarding admixture requirements) MCI-2019/MCI-2019W NCHRP 244 Series II Modified (Weight Gain During Saltwater Soak, Water Vapor Transmission, Chloride Ion Intrusion Characteristics) NCHRP 244 Series IV (Accelerated Weathering Test) ASTM C-672 (Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals) Oklahoma DOT Test Procedure OHDL-34 and OHDL-35 (Depth of Sealer Penetration) ASTM E-303 (Measuring Surface Frictional Properties Using the British Pendulum Tester) MCI-2020 MCI-2020 M NSF Standard 61 (portable water applications) by UL ASTM G-109 (Standard Test Method for Determining the Effects of Chemical Admixtures on the Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments) NSF Standard 61 (portable water applications) by UL MCI-2020 Powder / MCI-2020 V/O Powder ASTM G-109 (Standard Test Method for Determining the Effects of Chemical Admixtures on the Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments) MCI-2021 MCI-2022 ASTM C-672 (Method of Test for Scaling Resistance of Concrete Surfaces Exposed to De-Icing Chemicals and Freeze/Thaw) SS-W-110C (Water absorption Reduction) NCHRP 244 Series II (Chloride ion intrusion reduction) EIS (Corrosion Protection to Rebar) Stestmethod.doc Page 7 of 16 Issue: February 7, 2006
8 MCI-2026 Concrete Primer / MCI-2026 Floor Coating ASTM D-1464 (Solids by volume) ASTM D-4541 (Bond Strength) ASTM D-2240 (Hardness) ASTM D-2794 (Impact Resistance) ASTM D-4060 (Abrasion Resistance) ASTM D-635 (Flammability) MIL D-3134 F (Indentation) EPA Method 24 (VOC) ASTM C-413 (water absorption) ASTM F-609 (Coefficient of Friction) MCI-2120 MBT NSF Standard 61 (portable water application) by UL MCI-2311 MCI-2701 MCI-2702 ASTM C-109 (Compressive Strength) ASTM C-293 (Flexural Strength) ASTM C-496 (Splitting Tensile Strength) ASTM C-469 (Modulus of Elasticity) ASTM C-157 (Length Change) ASTM D-4541 (Direct Tensile Bond) ASTM C-109 (Compressive Strength) ASTM C-293 (Flexural Strength) ASTM C-496 (Modulus of Elasticity in Compression) ASTM C-157 (Shrinkage) ASTM C-1202 (Rapid Chloride Permeability) ASTM C-109 (Compressive Strength) ASTM C-293 (Flexural Strength) ASTM C-496 (Modulus of Elasticity in Compression) ASTM C-496 (Splitting Tensile Strength) ASTM C-157 (Shrinkage, Length change) ASTM D-4541 (Direct Tensile Bond) BioCorr Rust Preventative ASTM D-1748 (Humidity Chamber) ASTM D (Cast Iron Chip Test) Cooling Loop Gator EPA/600/4-90/027 F Requirements for discharge in freshwater 48-hour static D. pulex and P. Promelas Toxicity Test Stestmethod.doc Page 8 of 16 Issue: February 7, 2006
9 Corr-Seal VpCI Film German VIA Test TL Cor-Pak VpCI Fabric ASTM D-1117 (Sheet Grab Tensile, Thickness) Cor-Pak VpCI Stretch Film ASTM D (Ultimate Strength, Peak Elongation) ASTM D a (Tear Strength) ASTM D (Impact Puncture) ASTM D (Peel Cling) Cor-Pak VpCI Cocooning Stretch Film ASTM D (Tensile Strength at break, Elongation at break) ASTM ( Elmendorf Tear Strength) ASTM (Impact Strength) Cor-Pak VpCI Masking Film German VIA Test (TL ) Cor-Pak VpCI Skin Film Tensile Strength, Elongation Secant Modulus (ASTM D-882) Spencer Impact Strength (ASTM D-3420) Dart Drop Strength (ASTM D-1709) Elmerdorf Tear Strength (ASTM D-1922) Gloss (ASTM D-2457) Haze (ASTM D-1003) Cor-Pak EcoWeave Unit weight (ASTM D-3775) Tensile Grab Strength (ASTM D ) Tear Strength (ASTM D ) Cor-Pak Linerboard Basis weight (TAPPI T-410) TAPPI T-411 (Tear MD/CD, Caliper) TAPPI T-538 (Smoothness) Cor-Pak VpCI Polycoated paper ASTM D-689 (Tear test) ASTM F-1249 (MVTR) Stestmethod.doc Page 9 of 16 Issue: February 7, 2006
10 Cor-Pak VpCI Reinforced Paper TAPPI T-410 (Basis weight) TAPPI T-411 (Caliper) ASTM D B (Impact Puncture) ASTM D A (Tear Test) CorrLam VpCI Barrier Laminate ASTM D-646 (Basis weight) ASTM D-2103 (Caliper) ASTM D-882 (Tensile strength) FED STD 101 (Puncture resistance) ASTM D-1922 (Elmendorf Tear) ASTM F-88 (Heatseal strength) ASTM 1249 (Water vapor transmission rate) ASTM D-3985(Oxygen Transmission rate) CorrLube Industrial Gear oil ASTM D-1748 (Humidity testing) ASTM D-130 (Detection of copper corrosion from petroleum products by the copper strip farmish test) ASTM D-2893 (Oxidation test) IP-48 (Thermo-oxidative test) ASTM D-2670 (Falex Pin and Vee Test) VpCI CorrLube Grease ASTM D-1743 (Corrosion Test) CorrLube VpCI Motor Oils API CH-4, CG-4, CF-4 ASTM D-1748 (Humidity testing) ASTM D-4485 (Ball Rust Test) CorrLube Food Grade Penetrant ASTM D-97 (Pour point) ASTM D-1748 (Humidity chamber) ASTM D-130 (Copper Strip corrosion) ASTM D-971 (Interfacial tension of oil against water) ASTM D-445 (Kinematic Viscosity) ASTM D-2161 (Saybolt viscosity) CorrVerter VpCI ASTM B-117 (Salt Spray Test) Stestmethod.doc Page 10 of 16 Issue: February 7, 2006
11 CorShield Fabric ASTM D-3775 (Construction and Unit weight) ASTM D (Tensile Grab Strength) ASTM D (Tear Strength) ASTM D-1777 Mod (Coating thickness) CorShield Gold ASTM B-117 (Salt spray) ASTM D-1748 (Humidity chamber) CorShield VpCI Strippable Coating ASTM D-3960 (VOC) ASTM D-1748 (Humidity chamber) CorWipe 500 ISO 2878 (Antistatic and conductive products - Determination of electrical resistance) 42NRSC Natural Clay Coated One-side TAPPI T-410 (Basis weight) TAPPI T-411 (Caliper) TAPPI T-536 (Density) TAPPI T-412 (Moisture) TAPPI T-538 (Smoothness) TAPPI T-414 (Tear) TAPPI T-494 (Tensile) 50NRSC Natural Clay Coated One-side TAPPI T-410 (Basis weight) TAPPI T-411 (Caliper) TAPPI T-536 (Density) TAPPI T-412 (Moisture) TAPPI T-538 (Smoothness) TAPPI T-414 (Tear) TAPPI T-494 (Tensile) 63BRSC Bleached Clay Coated One-side TAPPI T-410 (Basis weight) TAPPI T-411 (Caliper) TAPPI T-536 (Density) TAPPI T-412 (Moisture) TAPPI T-538 (Smoothness) Stestmethod.doc Page 11 of 16 Issue: February 7, 2006
12 63NRSC Natural Clay Coated One-Side TAPPI T-410 (Basis weight) TAPPI T-411 (Caliper) TAPPI T-536 (Density) TAPPI T-412 (Moisture) TAPPI T-538 (Smoothness) TAPPI T-414 (Tear) TAPPI T-494 (Tensile) Eco Film DIN V (Biodegradability Testing under practical conditions) RAL GZ251 (Regulations of the German Compost Quality Assurance Organization BGK concerning quality criteria and the quality assurance of compost) DIN Part 30 (German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of Daphnia to the toxicity of waste water by way of a dilution series (L30)) Daphnia Test ISO 527 (Tensile and Ultimate Strength, Ultimate elongation) DIN (Tear propagation resistance) DIN (Permeation rates: oxygen) Eco Film Cryogenic DIN V (Biodegradability Testing under practical conditions) ASTM D (Specifications for Compostable Plastics) ISO 527 (Tensile and Ultimate Strength, Ultimate elongation) DIN (Tear propagation resistance) DIN (Permeation rates: oxygen) Eco Wrap ISO 527 (Tensile and Ultimate strength) DIN (Tear Propagation resistance) DIN (Permeation rates: oxygen) DIN V (Biodegradability Testing under practical conditions) RAL GZ 251 (Regulations of the German Compost Quality Assurance Organization BGK concerning quality criteria and the quality assurance of compost) DIN Part 30 (German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of Daphnia to the toxicity of waste water by way of a dilution series (L30)) Stestmethod.doc Page 12 of 16 Issue: February 7, 2006
13 Eco-Corr Biodegradable Film DSC (Melting point) ASTM D-1003 (Transparency) ISO 527 (Tensile Strength, Ultimate elongation) DIN (Failure energy Dyna-test) DIN (Permeation rates: oxygen) DIN V (Compostable testing) RAM GZ 251 (Plant Growth testing) DIN Part 30 (Ground water testing) EcoCorr ESD ASTM D (Specifications for Compostable Plastics) DIN V (Compostable Testing) RAL GZ 251 (Plant Growth Testing) DIN Part 30 (Ground water testing) DSC (Melting point) ASTM D-1003 (Transparency) ISO 527 (Tensile strength, Ultimate elongation) DIN (Failure energy dyna test) DIN (Permeation rates: oxygen) EcoLine All-purpose Lubricant ASTM D-4172 (4-Ball Wear Test) ASTM D-2670 (Falex Pin and Vee Block Wear Test) EcoLine Bearing Chain and Roller Lube EO (Greening the government through waste prevention, recycling, and federal acquisition) EcoLine Cutting Fluid ASTM D-1748 (Humidity chamber) ASTM D (Cast Iron Chip Test) ASTM D-2670 (Falex Pin and VEE Block Wear Test) EcoLine Food Machinery Lubricating Grease ASTM D-217 (Cone penetration) ASTM D-2596 (4-Ball EP and Weld load) ASTM D-2266 (4-Ball Wear Scar) ASTM B-117 (Salt Spray Cabinet) ASTM D-445 (Viscosity) ASTM D-2270 (Viscosity index) ASTM D-97 (Pour point) ASTM D-92 (Flash/fire point) EcoLine Heavy Duty Grease ASTM B-117 (Salt Spray Cabinet) Stestmethod.doc Page 13 of 16 Issue: February 7, 2006
14 EcoShield Fabric ASTM D-3775 (Construction, unit weight) ASTM D (Tensile Grab Strength) ASTM D (Tear Strength) ASTM D-1777 Mod (Coating thickness) EcoShield Paper TAPPI T-410 (Basis weight) TAPPI T-411 (Caliper) EcoShield VpCI Linerboard TAPPI T-410 (Basis weight) TAPPI T-411 (Caliper) EcoSol Eco Works M-138 M-370 M-370A M-529 M-530 M-640/640L ASTM D-1922 (Tear Test) ASTM D B (Impact-Puncture) ASTM D (Specifications for Compostable Plastics) DIN CERTCO DIN V (Compostable testing) GMRP Corrosion testing (General Motors Research Procedure) ASTM D (Test Method for Iron Chip Corrosion for Watersoluble Metalworking Fluids) ASTM F (Sandwich corrosion test) ASTM D 1748 (Humidity chamber) Cummins High Temperature Corrosion Bench Test Multimetal Cummins Bench Corrosion Test ASTM D-1748 (Corrosion protection in Humidity chamber) ASTM D-1401 (Water separability of Petroleum and Synthetic Fluids) ASTM D (Standard Test Method for Engine Coolant in Glassware) Stestmethod.doc Page 14 of 16 Issue: February 7, 2006
15 MCI Coating for Rebars ASTM D-1748 (Humidity cabinet) ASTM G (Modified Salt Spray Test) ASTM B-117 (Salt Spray Test) ASTM A 775/A 775M (Adhesion to concrete) MCI Coating for Rebar NT ASTM A (Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens) ASTM D-1748 (Humidity) MCI EcoCure ASTM C-309 (Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete MilCorr VpCI Shrink Film NFPA (Fire Test for Flame Resistant Textiles and Films) ASTM D (Tensile Strength, Elongation) ASTM D (Elemendorf Tear Strength) ASTM D (Puncture resistance) ASTM G (UV Weathering test) S-14 Bio S-69 Powder NACE standard TM (Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from) ASTM D 1126 (Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation) EPA/600/4-90/027 F (Methods for Measuring the Acute Toxicity of Whole Effluents to Freshwater and Marine Organisms) E (48 hour Static renewal toxicity test) VpCI Teflon Lube ASTM D-566 (Dropping Point of Lubricating Grease) ASTM D-217 (Cone Penetration of Lubricating Grease) ASTM D-942 (Pressure drop in bar) ASTM D-972 (Evaporation Loss of Lubricating Greases and Oils) ASTM D-1743 (Rust protection) ASTM D-1264 (Water washout) ASTM D-2670 (The Falex Pin and Vee Block Test) ASTM D-2266 (Four Ball Wear) FTNS 791B (Oil Separation) Stestmethod.doc Page 15 of 16 Issue: February 7, 2006
16 VpCI Coolant Antifreeze ASTM D (Standard Test Method for Engine Coolant in Glassware) VpCI Fabric ASTM D-3775 (Unit Weight) ASTM D A (Tear Strength) ASTM D (Tensile Strength) ASTM D B (Impact puncture) VpCI Super Penetrant ASTM D-971 (Test for Interfacial Tension of Oil against Water) ASTM D-1748 (Humidity test) Stestmethod.doc Page 16 of 16 Issue: February 7, 2006
MARTIN TESTING LABORATORIES (MTL) PAINTS AND COATINGS TESTING CAPABILITIES
Liquid Coating Properties Composition VOC Content, ASTM D2369 Water Content, ASTM D4017 Physical Properties Calculating Physical Constants of Coatings, ASTM D5201 Density, ASTM D1475 Flash Point, ASTM
Advantages and Disadvantages of Low VOC Vegetable Based Metalworking Fluids
Advantages and Disadvantages of Low VOC Vegetable Based Metalworking Fluids John Burke, CMFS STLE Fellow Global Director of Engineering Services Alan Cross, Senior Project Engineer Houghton International
FOOD GRADE INDUSTRIAL OILS & GREASES
FOOD GRADE INDUSTRIAL OILS & GREASES COMPRESSOR OILS Food Grade Synthetic Compressor Oils Fully synthetic compressor oils formulated from the highest quality polyalphaolefin (PAO) base oils with a superior
FALEX Four-Ball Extreme Pressure Test Machine
FALEX Four-Ball Extreme Pressure Test Machine The Four-Ball EP Test measures a lubricant s extreme pressure properties under High Hertzian contact in pure sliding, or pure rolling, motion. The test is
09990 MOLD REMEDIATION, LEAD-BASED PAINT ABATEMENT AND ENCASEMENT OF ASBESTOS
09990 MOLD REMEDIATION, LEAD-BASED PAINT ABATEMENT AND ENCASEMENT OF ASBESTOS PDS SE-160 01-2006 1. PRODUCT NAME SE-160 Clear Surface Coating (water-based copolymer) Specialty Elastomeric Topcoat 2. MANUFACTURER
MaxCell Technical Manual Design Parameters
MaxCell Technical Manual Design Parameters Breaking Strength by Product Style, lbs Product Style Standard MaxCell Fire Resistant MaxCell Test Method 4 Cell 2,750 2,200 ASTM D 5 Bellcore 5 5.. Cell 2,50
VpCI Corrosion protection during transport and storage
VpCI Corrosion protection during transport and storage Cortec Vapor phase Corrosion Inhibitors (VpCI ) provide multimetal protection with corrosion inhibiting vapors that condense onto the surface of your
FLEX-WRAP Foam Pipe Wrap
FLEX-WRAP Foam Pipe Wrap Flex-wrap Inexpensive Used to wrap all pipes in a concrete pour Satisfies UPC Code Sec.315.7 Provides true expansion space between pipe and a concrete pour Product # Dimesions
07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
07 21 19 STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 7819 Broadview Road Cleveland, OH 44131 800-522-4522 February, 2011 SPEC NOTE: This guide specification is intended for use when specifying
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended
THERMAL INSULATION MATERIALS TEST METHOD SELECTION LIST
THERMAL INSULATION MATERIALS TEST METHOD SELECTION LIST Instruction: Check each test method for which you are requesting accreditation. An asterisk beside the NVLAP Test Method Code indicates that proficiency
PTFE Teflon Glass Fabric Grades & Material Data Sheets
PTFE Teflon Glass Fabric Grades & Material Data Sheets Taconic TAC-TAPES Taconic TAC-TAPES are constructed with high-quality adhesives and backing materials to deliver superior performance. A choice of
EVALUATION OF THE PERFORMANCE OF THE PROTECTIVE SURFACE COATINGS FOR CONCRETE
EVALUATION OF THE PERFORMANCE OF THE PROTECTIVE SFE COATINGS FOR CONCRETE Haimoon CHEONG * Hwangu YU *2 Taesong AHN *3 Byunghwan OH *4 ABSTRT: Chloride penetration into concrete is the main cause of the
SECTION XXXXXX TECHNICAL SPECIFICATIONS FOR INSTALLATION OF PROTECTIVE COATINGS FOR MANHOLES, WETWELLS, AND OTHER SANITARY SEWER STRUCTURES
1.00 PART 1 GENERAL 1.01 SCOPE A. It is the intent of this contract to install a 100% solids epoxy monolithic coating to the walls, benches and inverts of all manholes and the specified surfaces of other
Pin & Vee Block Test Machine
Pin & Vee Block Test Machine Picture of the apparatus Used in Standard Test Methods ASTM Standards D 2670, D2626, D3233, D5620 Federal Test Methods FTM-791-3807.1, FTM-791-3812.1 Chrysler Corporation 461-C-84-01,
#158 PURE SYNTHETIC COMPRESSOR OIL ISO 32 THROUGH ISO 220
#8 PURE SYNTHETIC COMPRESSOR OIL ISO 2 THROUGH ISO 2 Pure Synthetic Compressor Oil is a full synthetic, non-detergent, ashless, non-zinc containing anti-wear, rust and oxidation inhibited premium quality
SARKOSYL O, an N-acyl sarcosine, is a corrosion inhibitor for lubricating oils, greases O R C N CH COOH CH 2 3
Ciba Specialty Chemicals Additives Lubricant Additives Ciba SARKOSYL O Oil soluble corrosion inhibitor Typical chemical and physical properties SARKOSYL O, an N-acyl sarcosine, is a corrosion inhibitor
Material Product Data Sheet Sealers for Thermal Spray Coatings
Material Product Data Sheet Sealers for Thermal Spray Coatings Thermal Spray Products: AP, APT Thinner, ERS, SA, URS, Metco 185 Sealer 1 Introduction Sealers are materials that penetrate the pores of thermal
Silane Penetrating Waterproofing Treatments AND Changing VOC Regulations Presented By: Jerry Fulcher Advanced Chemical Technologies, Inc.
Silane Penetrating Waterproofing Treatments AND Changing VOC Regulations Presented By: Jerry Fulcher Advanced Chemical Technologies, Inc. Penetrants Forms chemical bond with the walls of the pores, the
Johnson Controls Parts Centre. Sabroe S68 refrigeration oil
Johnson Controls Parts Centre refrigeration oil Hydro-treated, high performance oil for refrigeration Sabroe offers the highest quality lubricants available for today s refrigeration market. The increased
Division 9. SignaFlor Pad and Pour Flooring System
Division 9 SignaFlor Pad and Pour Flooring System SPECIFICATIONS Page 1. General... 2 1.1 Description 2 1.2 Quality Assurance 2 1.3 Submittals 2 1.4 Delivery and Storage 3 1.5 Warranty 3 1.6 Working Conditions
A. The shade structure contractor shall be responsible for the design, engineering, fabrication, and supply of the work specified herein.
13310 FABRIC SHADE STRUCTURES FOR PLAYGROUND AREAS ************************************************************************************************************************ SPECIFIER: CSI Master Format
MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION
MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2 All test performed per ASTM specifications. Parts
PAAM COMMERCIAL PRIVATE LIMITED
METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal
Scotch-Weld TM. Acrylic Adhesives. DP8405NS Green. Product Data Sheet. Date: March 2014 Supersedes: August 2013
Scotch-Weld TM Product Data Sheet Acrylic Adhesives Date: Supersedes: August 2013 Product Description 3M TM Scotch-Weld Acrylic Adhesives are high performance, twopart acrylic adhesives that offer good
PRODUCT DATA SHEET DESCRIPTION:
DESCRIPTION: SP-9888 Pipe Lining is based on the latest Zero VOC Novolac Technology. The product cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance.
Example Specification for Concrete using Current Building Code Requirements
Example Specification for Concrete using Current Building Code Requirements DISCLAIMER: This specification is an example that accompanies a seminar titled The P2P Initiative: Performance-based Specs for
UX-30 PERFORMANCE TESTING SUMMARY REPORT Revision 0
UX-30 PERFORMANCE TESTING SUMMARY REPORT Revision 0 Prepared By: Patrick L. Paquin, EnergySolutions Date Reviewed By: Mirza I. Baig, EnergySolutions Date Approved By: Thomas F. Dougherty, Columbiana Hi
Dubai Municipality Standard DMS 1: Part 5: 2004
Specification for precast concrete blocks Part 5: Normal-weight concrete-polystyrene sandwich masonry blocks Issue Date Revision Revision Description Prepared by Approved by Authorized by 19/12/2004 Issue
Construction. 3-part thixotropic epoxy patching mortar. Product Description. Tests
Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages
4. Cryogenic gloves are generally designed to protect the hands from intense cold or heat.
PROTECTIVE GLOVES In many University laboratories, exposure to chemicals, infectious agents, sharp objects, extreme temperatures and other hazards can create a potential for injury to the hand. Wherever
Concrete Repair. Applications and Procedures
Concrete Repair Applications and Procedures Objectives Identify what surface preparation is needed Identify typical modes of failure and testing methods How to choose the correct material for the repair
The Original and Patented Stackable Poly Tanks. When You Want to Beat the Drum!
The Original and Patented Stackable Poly Tanks When You Want to Beat the Drum! A TOTE A LUBE STORAGE & DISPENSING SYSTEM IS A LOW COST INVESTMENT THAT PAYS HIGH DIVIDENDS IN TIME SAVED, EFFICIENT USE OF
PRODUCT DATA SHEET Sika Cable System
PRODUCT DATA SHEET Corrosion protection for bridge cables of steel and galvanized steel PRODUCT DESCRIPTION The Sika Cable System consists of coating materials as well as a sealing respectively injection
Technical Data Sheet February 2014
Scotch-Weld Technical Data Sheet February 2014 Product Description s are high performance, two-part acrylic adhesives that offer excellent shear, peel, and impact performance. These toughened products
CRS Sales & Marketing
TPO - Technology CRS Sales & Marketing Presenter: Gena Miller Thank you AIA, Sign In Sheet (1 Hour CEU-HSW) Division of CRS, Inc. (Commercial Roofing Specialties) 5 Locations (4 state of GA, 1 state of
Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
WATER-SOLUBLE METALWORKING FLUIDS
Registered trade mark Stevens Industrial Services (SIS) Ltd HIGH PERFORMANCE FLUIDS WATER-SOLUBLE METALWORKING FLUIDS general information booklet Preface Unfortunately, it is a fact of life that metal
TABLE OF CONTENTS CHAPTER NO. TITLE PAGE NO. ABSTRACT
vii TABLE OF CONTENTS CHAPTER NO. TITLE PAGE NO. ABSTRACT LIST OF TABLES LIST OF FIGURES LIST OF SYMBOLS AND ABBREVIATIONS iii xvii xix xxvii 1 INTRODUCTION 1 1.1 GENERAL 1 1.2 OBJECTIVES AND SCOPE OF
SPECIAL COMPOUND FOR RHEOPLASTIC AND ANTI-CORROSION SUPERCONCRETE WITH VERY HIGH DURABILITY
BS 40 M6 MuCis mono SPECIAL COMPOUND FOR RHEOPLASTIC AND ANTI-CORROSION SUPERCONCRETE WITH VERY HIGH DURABILITY LE CE LE type: "expansive binder which allows the production of extremely fluid concrete
referenceguide Reference Guide for Pressure-Sensitive Adhesive Tapes great to work with
referenceguide Reference Guide for Pressure-Sensitive Adhesive Tapes referenceguide Table of Contents Tapeology 1-5 What is a pressure-sensitive tape? 1 What are the different components of a tape? 1 How
Dispelling the Myths of Heat Transfer Fluids. Kevin Connor The Dow Chemical Company
Dispelling the Myths of Heat Transfer Fluids Kevin Connor The Dow Chemical Company Heat Transfer Chill Water Loop Secondary Coolant (Heat Transfer Fluid) Primary Refrigerant Expansion Device Air Handler
External Wrapping of Steel Riser Pipe. Case Study HJ3 CS200902
External Wrapping of Steel Riser Pipe Case Study HJ3 CS200902 Introduction Refineries process a wide variety of petroleum products. As part of the process, they rely on cooling towers, which recycle water
239S SUPER LUBE SUPREME SAE 10, 30, 50 AND 60
239S SUPER LUBE SUPREME SAE 10, 30, 50 AND 60.Super Lube Supreme is a premium high performance para- synthetic, fluid that is specially formulated to provide superior protection and performance in powershift
Metal Rescue Rust Remover Technical Data
Technical Data Product Description Metal Rescue TM is an innovative new technology that efficiently removes rust without harming surrounding materials. It is a water-based, non-toxic solution that is biodegradable
SECTION 072100 FIBERGLASS INSULATION
This Specification Section is provided in CSI format for engineers and architects specifying fiberglass insulation manufactured by Knauf Insulation GmbH. in Shelbyville, Indiana. Delete insulation types
more than you expect Threadlockers, sealants and adhesives
Threadlockers, sealants and adhesives Threadlockers and thread sealants The threadlockers are used to prevent loosening in a joint. At the same time the cured adhesive keeps moisture and, for example corrosive
MultiSpecimen Test Machine
MultiSpecimen Test Machine The FALEX MultiSpecimen Test Machine is a versatile system for evaluating the friction, wear, and abrasion characteristics of materials, coatings, and lubricants. The FALEX MultiSpecimen
Section 03 35 43 Polished Concrete Finishing. Vexcon
SS 120 1-13 Section 03 35 43 Polished Concrete Finishing Specifier Note: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-part format. This section
HKAS666O ANTI-STATIC NYLON FILM
DATA SHEETS HKAS666O ANTI-STATIC NYLON FILM HKAS666O is a specially formulated nylon film based on nylon 6 polyamide resin. This film is a tough, versatile film which is ideally suited for physically demanding
Grease Composition for Lubrication of Journal Bearings used in Sugar Mills
Grease Composition for Lubrication of Journal Bearings used in Sugar Mills T. Singh, S K Banerjee and K Ravi Bharat Petroleum Corporation Limited R&D Centre Sewree (E), Mumbai - 400 015, India E-mail:
SAND CAST CHILL CAST LM4 - TF
1 This alloy conforms with British Standards 1490 and is similar to the obsolete specifications BS.L79 and D.T.D 424A. Castings may be in the cast (M) of fully heat treated (TF) conditions. CHEMICAL COMPOSITION
SITE INVESTIGATION FACILITIES
SITE INVESTIGATION FACILITIES Drilling Hydraulic rotary & calax drilling rigs100/150mm Diameter boreholes having drilling capacity up to 200m depth. Auger drilling 100/150mm diameter boreholes up to maximum
Ultra Coolant. The Best Performance. The Best Cost. The Best Coolant.
Ultra Coolant The Best Performance. The Best Cost. The Best Coolant. Ultra Coolant is not an oil. Ultra Coolant is an engineered synthetic coolant specifically designed to help rotary screw compressors
Surface Engineering Solutions Rebuild, Repair and Protect Industrial Equipment
Surface Engineering Solutions Rebuild, Repair and Protect Industrial Equipment Whatever You Rebuild, Repair and Protect...... Find the Right Solution! Henkel's Solutions for all Surface Engineering Needs
TIGER Drylac U.S.A., Inc. 3855 Swenson Avenue St Charles, IL T 800 243 8148 F 877 926 8148 [email protected] www.tiger-coatings.
Product Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90500) Epoxy zinc-rich powder coating primer. Part of a two-coat TIGER Shield system. Designed to impart superior corrosion protection to steel
How To Test A Base Axe
Scotch-Weld DP760 Product Data Sheet Updated : February 2009 Supersedes: June 2001 Product Description DP760 epoxy adhesive is a non-sag, two-part room temperature curing adhesive designed for use when
Product Guide Specification
Reef Industries, Inc. 9209 Almeda Genoa Rd. Houston, Texas 77075 Toll Free (800) 231-6074 Phone (713) 507-4251 Fax (713) 507-4295 Web Site www.reefindustries.com E-Mail [email protected] Product Guide
APPENDIX C MOISTURE GUIDELINES & MOISTURE TESTING
APPENDIX C MOISTURE GUIDELINES & MOISTURE TESTING Appendix C Moisture Guidelines Determining moisture content is an essential part of quality control within the flooring installation process. Flooring
CHESTERFLEX ROOF WATERPROOFING MEMBRANES
CI/SfB (47) Ln2 Chesterfelt Ltd CHESTERFLEX ROOF WATERPROOFING MEMBRANES Certificate No 94/3062 DETAIL SHEET 2 Product THIS DETAIL SHEET RELATES TO CHESTERFLEX ROOF WATERPROOFING MEMBRANES, POLYESTER REINFORCED
FLEXIBLE CIRCUITS MANUFACTURING
IPC-DVD-37 FLEXIBLE CIRCUITS MANUFACTURING Below is a copy of the narration for DVD-37. The contents of this script were developed by a review group of industry experts and were based on the best available
Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1. 212 F (100 C) calculated VOC-US/Hong Kong. US EPA method 24 (tested)
Not approved 2063;2064 1,2 2063 ^(ValidationDate) 1 Product description This is a two component solvent free polyamine cured coating. It is a general purpose tank lining with good chemical resistance.
David O. Ahrens, Commercial Marine Manager Caterpillar Engine Products Division
Caterpillar Inc. Cat Marine Power Diesel fuel feature story 187-P-2-004-98 Special to Seaway Review HEADLINE: BYLINE: Fuel for Thought David O. Ahrens, Commercial Marine Manager Caterpillar Engine Products
Above Ground Liquid Storage Solutions
Above Ground Liquid Storage Solutions AVIATION FARMS/FORRESTRY/MINING FLEET/YARD OPERATION Inside Front Cover-See Cover File for Graphic MARINE MILITARY/PUBLIC SAFETY MISSION CRITICAL OPERATIONS WATER
petrochemical products identifies equipment latest specifications of ASTM as well as other international test standards.
P E T R O L E U M / P E T R O C H E M I C A L T E S T G U I D E T his A G u i d e t o A S T M a n d R e l a t e d S t a n d a r d T e s t s guide to current tests for petroleum and petrochemical products
HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS
BSW HIGH PERFORMANCE PRE-APPLIED SYSTEM FOR BLIND SIDE & BELOW GRADE WATERPROOFING APPLICATIONS BSW is a fully reinforced Pre-Applied system membrane designed for horizontal and vertical external blind-side
3M Electrically Conductive Adhesive Transfer Tape 9703
Technical Data April 2011 M Electrically Conductive Adhesive Transfer Tape 970 Product Description M Electrically Conductive Adhesive Transfer Tape 970 is a pressure sensitive adhesive (PSA) transfer tape
1.02 DESCRIPTION A. This Section specifies furnishing and installing Cast in Place Detectable/Tactile Warning Surface tiles where indicated.
CAST IN PLACE DETECTABLE/TACTILE WARNING SURFACE TILE PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Special Conditions and Division 1 Specifications
Visit our website for more information RawnAmerica.com. Distributed by:
Visit our website for more information RawnAmerica.com All statements, technical information and recommendations contained herein are based on tests Cortec Corporation believes to be reliable, but the
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Material Safety Data Sheet Copyright, 2003, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1)
2. The mold is closed up and held under hydraulic pressure while the rubber material or compound cures.
Designing with Rubber Molding Processes Compression Molding Compression molding is the process of placing a pre-load of a rubber material or compound directly in the mold cavity and compressed to the shape
WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12
WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12 87 88 GOOD INDUSTRY PRACTICES 12 WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12.1 BACKGROUND Most roofs in Singapore are constructed using reinforced
polymer additive General Overview
DuPont Fluoroguard polymer additive General Overview DuPont Fluoroguard is a range of colorless, odorless, and chemically inert polymer additives based on fluorinated synthetic oil. Fluoroguard is designed
A H M 531 Penetration & Ring & Ball & Ductility & Flash & Fire point By: Mu'men Al-Otoom
The Civil Engineering Center 1 Visit www.ahm531.com for more lecture notes and E-book! The Civil Engineering Center 2 Visit www.ahm531.com for more lecture notes and E-book! Introduction : The grades of
3 Scotch-Seal TM. Polyurethane Sealant 540 Polyurethane Adhesive Sealant 560. Technical Data July, 2008
3 Scotch-Seal TM Technical Data July, 2008 Product Description 3M Scotch-Seal and 3M Scotch-Seal Polyurethane Adhesive Sealant 560 are one component, moisture curing products which form permanent elastic
High Performance PSA in Sheet Membrane in Water Protection
High Performance PSA in Sheet Membrane in Water Protection Xia Cao, Senior R&D Chemist, W. R. Grace, Cambridge MA 02140 Jyoti Seth, Strategic Program Leader, W. R. Grace, Cambridge MA 02140 Concrete is
Sugar or Salt? Ionic and Covalent Bonds
Lab 11 Sugar or Salt? Ionic and Covalent Bonds TN Standard 2.1: The student will investigate chemical bonding. Have you ever accidentally used salt instead of sugar? D rinking tea that has been sweetened
Guidelines for Selecting and Maintaining Glycol Based Heat Transfer Fluids
Guidelines for Selecting and Maintaining Based Heat Transfer Fluids David Berry Engineering Manager, Chem-Aqua Canada Allan Browning Technical Marketing Manager, Chem-Aqua, Inc. Based Heat Transfer Fluids
Specifications, Product Testing and Terminology
Specifications, Product Testing and Terminology The following synopsis provides a review of various material and final product testing, which is performed on our products, as well as, many of our competitors.
SECTION 15190 HVAC INSULATION. A. All work specified in this Section is subject to the provisions of Section 15010.
SECTION 15190 HVAC INSULATION PART ONE - GENERAL PART 1 - GENERAL 1.01 DESCRIPTION A. All work specified in this Section is subject to the provisions of Section 15010. B. All insulation products shall
CORROSION PROTECTION METHODS OF STRUCTURAL STEEL AGAINST ATMOSPHERIC CORROSION
CORROSION PROTECTION METHODS OF STRUCTURAL STEEL AGAINST ATMOSPHERIC CORROSION E. Daflou a, E. Rakanta b, *G. Batis c a Chemical Engineer, Chemical Engineering School, Section of Materials Science and
3 Scotch-Weld TM. Urethane Adhesives 3532 B/A 3535 B/A 3549 B/A. Technical Data March, 2002
3 Scotch-Weld TM Technical Data March, 2002 Product Description 3M TM Scotch-Weld TM 3532 B/A, 3535 B/A and 3549 B/A are two-component, polyurethane adhesives which cure at room temperature or with heat
Fire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance Concrete
Fire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance Concrete Ming-Gin Lee 1,a, Yi-Shuo Huang 1,b 1 Department of Construction Engineering, Chaoyang University of Technology,Taichung
HYDRAULIC ANALYSIS OF PIPE LINED WITH MADISON S 100% SOLIDS STRUCTURAL POLYURETHANE COATINGS
HYDRAULIC ANALYSIS OF PIPE LINED WITH MADISON S 100% SOLIDS STRUCTURAL POLYURETHANE COATINGS Shiwei William Guan, Ph.D. Vice President, R&D and International Business Madison Chemical Industries Inc. 490
Approved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 28 C calculated VOC-US/Hong Kong. US EPA method 24 (tested)
Approved 735;739 1 735 phenolic/novolac epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured phenolic/novolac epoxy coating. It is a specially designed tank lining with
Scotch-Weld TM. Epoxy Adhesive 1838 B/A Green 1838 B/A Tan 1838-L B/A Translucent. Technical Data February, 2016. Product Description
3 Scotch-Weld TM 1838 1838 1838-L Technical Data February, 2016 Description 3M TM Scotch-Weld TM s 1838 and are controlled flow products; Scotch-Weld 1838-L is flowable. These epoxy adhesives are two-part,
The Concrete Life Cycle: Maintain to Sustain. Fred Goodwin BASF Construction Chemicals (EB-N) Beachwood OH
The Concrete Life Cycle: Maintain to Sustain Fred Goodwin BASF Construction Chemicals (EB-N) Beachwood OH What is Concrete? Concrete: Instant rock -just add water to make a hard wet sponge. A composite
3M Scotchkote Urethane Coating 165HB
3M Scotchkote Urethane Coating 165HB Product Description 3M Scotchkote Urethane Coating 165HB is a two component 100% solids urethane coating used for the internal and external protection of steel and
3 Scotch-Seal TM. Tamper Proof Sealant 1252. Technical Data Issue No. 5
3 Scotch-Seal TM Technical Data Issue No. 5 Advantages 3M Scotch-Seal is a one-part, fast drying, antitamper sealer. Self-extinguishing. It can be applied over adjustable or removable parts to indicate
Table of Contents. Electrical Properties... 11 Effect of Humidity... 12 Effect of Temperature... 14 Effect of Frequency... 16 Corona Life...
Table of Contents General Information... 1 Physical and Thermal Properties... 3 Mechanical Properties... 5 Hydrolytic Stability... 6 Dimensional Stability... 7 Thermal Aging... 8 Electrical Properties...
Development of an innovative bio-based structural adhesive
Development of an innovative bio-based structural adhesive Blanca Palomo, R&D Engineer [email protected] RESCOLL Independent research company located in Pessac (33) specialized in technologic innovation
DIVISION 23 HEATING, COOLING, AIR CONDITIONING AND VENTILATION
SECTION 230713- ALUMAGUARD ENGINEER SPECIFICATION DIVISION 23 HEATING, COOLING, AIR CONDITIONING AND VENTILATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract,
3 Scotch-Weld TM. Structural Adhesive Films AF 6 AF 10 AF 13. Technical Data July, 2001
3 Scotch-Weld TM Technical Data July, 2001 Introduction 3M Scotch-Weld AF 6, AF 10, AF 13 are unsupported, thermosetting adhesives in film form developed for the structural bonding of metals. These products
Sika Membran System For Sealing and Waterproofing Construction Gaps in Building Façades
Construction Sika For Sealing and Waterproofing Construction Gaps in Building Façades Waterproof and Airtight Flexible Seal Controlled Vapour Diffusion Bonds to any Building Substrate Prevents Interstitial
MCI QUESTIONS & ANSWERS
MCI QUESTIONS & ANSWERS Q. Are Migrating Corrosion Inhibitors (MCI) similar to Vapor phase Corrosion Inhibitors (VpCI)? A. MCI technologies are chemically similar to VpCI. The protection mechanism is identical.
Chapter 2 Basis of design and materials
Chapter 2 Basis of design and materials 2.1 Structural action It is necessary to start a design by deciding on the type and layout of structure to be used. Tentative sizes must be allocated to each structural
B. ASTM C 533 Calcium Silicate Block and Pipe Thermal Insulation. C. ASTM C 547 Mineral Fiber Preformed Insulation
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
IPC-SM-840C. Qualification and Performance of Permanent Solder Mask IPC-SM-840C. The Institute for. Interconnecting. and Packaging Electronic Circuits
The Institute for Interconnecting and Packaging Electronic Circuits Qualification and Performance of Permanent Solder Mask January 1996 A standard developed by the Institute for Interconnecting and Packaging
Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 34 C IED (2010/75/EU) (calculated)
408;21800;21820;21740;21760;21840 1,2 408 unsaturated vinyl ester ^(ValidationDate). 1 Product description This is a glass flake reinforced unsaturated vinyl ester coating. It is an ultra high build, extremely
ENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES. July 1, 2008 Revision 2
ENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES 1 PART 1 - GENERAL 1.0 GENERAL 1.1 REFERENCES: SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED FIBERGLASS