Service Manual Film magazines

Transcription

1 Service Manual Film magazines MAGOMSL.EPS May 1993 COPYRIGHT 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL/FAX Victor Hasselblad AB Göteborg Sweden Copyright 1997 by Victor Hasselblad AB. All rights reserved. No parts of this material may be reproduced, stored in retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of the Company.

2 Film magazines Contents list Disassembly: Film magazines series A, E, TCC Reassembly: Film magazines series A, E, TCC Support and mechanism A12, A16, A16S, A24 Shell and cover A12, A16, A16S, A24 Shell and cover A12, A16, A24 (Modified 1996) Shell and dark slide holder A12, A16, A24 Spool holder A12, A24 S/N TR RI Spool holder A12, A24 S/N RI forwards Spool holder A16, A16S S/N UV EP12394 Spool holder A16 S/N 31EP forwards, A32 Cover A16 S/N 31EP forwards Support and Mechanism A12/A16/A24TCC, E12/16/24, E12CC Shell, cover and dark slide holder E12/16/24, E12CC Shell and dark slide holder E12/16/24, E12CC (Modified 1996) Shell and cover A12TCC, A16TCC, A24TCC Spool holder A12/A16/A24TCC, E12/16/24, E12CC Cover and circuit board E12, E16, E24 Cover and circuit board A12/A16/A24TCC, E12CC Support magazine 70 Mechanism magazine 70 Shell and cover magazine 70 Spool holder magazine 70 Polaroid magazine 100 Revision 1 September 1997

3 Film magazines Contents list Magazine PolaPlus Magazine PolaBasic Support and mechanism A32 Shell and cover A32 Revision 1 September 1997

4 Related Service Infos Magazines 06/93 Modification - A12, A16, A24 and 70 (incl. TCC) 11/94 E-type film magazines introduced - E12, E16 and E24 15/95 Stop arm modification - A, E and TCC 20/95 Film magazine E12, E16 and E24 25/95 Magazine shell and support modification - A, E and TCC 26/95 New spool holder - A16 27/95 Magazines redesigned - A12, A16 and A24 08/96 New dark slide holder - E12, E16, E24 and E12CC 09/96 Fixed stop screw - A24 and E24 10/96 Modified spool holder - E12, E16, E24, E12CC and A16 10/97 New picture frame - A16 and E16 11/97 New spacing gear - A16 and E16 12/97 Modified magazine support - A12, A24, E12, E24 and E12CC 19/97 Shaft and mechanism plate modification - A12, A16 and A24 24/97 Film magazine - A32 25/97 Spare part number changed - PolaPlus/PolaBasic 01/00 New CD-ROM - Version /00 Adjustment of the eccentric - A16 and E16 09/00 New CD-ROM - Version /00 Discontinued modification kit - friction brake A12 16/00 Modification of light trap foil 04/01 New CD-ROM - Version 2.0 Revision 3 January 2001

5 Film magazines series A, E and TCC Disassembly 1:1 Right cover (see page 13) Pull out the magazine slide. Remove the spool holder from the magazine. Dismantle the magazine slide holder where appropriate. Remove the leather from the cover. Unscrew 3 screws and lift off the right cover. Mechanism (see page 12) Remove the washer , loosen 2 screws and lift off plate Remove gear Pull up the shaft , and remove the complete gear Lift off and separate the spring housing from hub 14185, remove return spring Remove the clip , washer and return stop Remove the washer , unhook spring from link Unhook the 2 springs from the riveted pin (A Fig. 1). Remove the signal 13031, loosen 3 screws and lift off dial 13806, remove spring Pull up the shaft and remove arm Lift the centre mechanism up from the hub in the magazine support (B Fig. 1), turn it slightly sideways, and lift off gear and thereafter centre mechanism Remove the release arm Outer plate (see page 12 and 13). A B Fig. 1 MAG COPYRIGHT ANDERS ENGS Östra vägen HÖNÖ Unscrew 9 screws and lift off the outer plate. Remove the light trap 13067, foil 13508, exposure lock 21535, spring 13820, 2 plate springs and locking spring Remove the locking arm from button Unhook the spring from the locking arm. May 1997

6 Film magazines series A, E and TCC Disassembly 1:2 Shell (see page 13) Loosen the screws and situated underneath the leather on the shell. (The shell of older magazines are slightly different, where 2 screws are going through the right side of the body and into the frame. They have to be dismantled too. See Service Info 25/95). Separate the shell from the magazine support. Spool holder (see page 16 and 17) Loosen 4 screws , lift up the plate slightly and remove pressure plate and plate spring Loosen the 2 screws , disconnect spring from support , and lift off plate and arm Lift off the rollers 13514, remove spring and looking shaft Remove the leather and rubber plate Unscrew the 4 screws Lift off the cover Remove the indicators and dials. CAUTION! When handling the circuit board a grounded bench mat and a wrist strap must be used to prevent ESD damage. Unsolder the 4 cables of the contact assembly from the circuit board. Remove the circuit board carefully (kept in place by a double sided adhesive tape). Disassemble the clip and remove locking mechanism Loosen the gear and remove locking mechanism and film signal Unscrew the 4 screws and separate the end plate from the support. Revision 1 February 2000

7 ANDERS ENGSTRÖM Östra vägen HÖNÖ Film magazines series A, E and TCC Reassembly 2:1 Shell (see page 13) Fit the shell on the magazine support. Note! The position of the shell in connection with the support (Fig. 2). Secure with the 5 screws and Fold back the leather onto the shell and fasten with glue. MAGFI Outer plate (see page 12 and 13) Fit the exposure lock 21535, spring and 2 plate springs on the support. Thread the washer over button and assemble it in the shell. Connect the spring to locking arm Grease the spring, as well as the upper side of the locking arm, and connect it to button Fit the locking spring Put the light trap in foil and fit it on the support. Pull down and hold the light trap in place by means of the magazine slide 41068, fit the outer plate and secure it with 9 screws Make sure that the exposure lock and locking arm are functioning when taking the magazine slide in and out. Fig. 2 COPYRIGHT 1996 ANDERS ENGSTRÖ Östra vägen HÖNÖ Picture frame The position of the picture frame of the magazine, i. e. the distance between the edge of the picture frame and the outer plate is inspected and adjusted using the magazine gauge V The distance is 3.55 mm ± 0.05 mm (Fig. 3). MAGFIG COPYRIGHT 1996 Fig. 3 May 1997

8 Film magazines series A, E and TCC Reassembly 2:2 Mechanism (see page 12) MAG Lubricate with grease (Fig. 4). Fit the release arm Lubricate the gears and shafts of the centre mechanism with some drops of oil and fit it over the pin (A Fig 4). Fit the gear and bring the centre mechanism into the hub of the magazine support. Fit the spring into the spacing gear. Tension the spring by rotating the gear clockwise approx. 1 1/2 turns. Turn the spacing gear towards the stop and check that it returns properly (to Zero). A = Isoflex Topas L 32 Fig. 4 COPYRIGHT ANDERS ENGS Östra vägen HÖNÖ Fit the arm Lubricate the shaft with grease and assemble it. Connect 2 springs to the pin (A Fig. 4). On the centre mechanism there are 2 springs, connect them to the screw and link respectively. Fit the dial over the spacing gear. Secure with 3 screws , do not tighten the screws too hard (Fig. 5) Fit the return stop together with washer and secure it with clip MAG COPYRIGHT ANDERS ENG Östra vägen HÖNÖ Fig. 5 Fit the spring in the spring housing as shown in the diagram. The easiest way to do this is to use a new spring kept in its plastic ring, then lubricate the spring with grease (Fig. 6). Fit the hub into the spring and assemble back the spring housing on the magazine support. MAGFIG COPYRIGHT 1996 = Isoflex Topas L 32 ANDERS ENGSTRÖM Östra vägen HÖNÖ Fig. 6 May 1997

9 Reassembly 2:3 Film magazines series A, E and TCC Lubricate the gear assembly (Fig. 7). Tension the spring by rotating the spring housing clockwise approx. 1 1/2 turns, hold in place and fit the gear assembly (Fig. 8). Conduct the shaft through gear Note! The long pin has to go down into the magazine support. Fit the gear 12209, insert washer over the centre mechanism 21548, fit the plate and secure with 2 screws Fit the washer over the plate. Tension the spring approx. 1 turn and fit the film signal = Isoflex Topas L 32 = Isoflex PDP 48 MAGFIG7.EPS Lubricate at the inner side of the teeth COPYRIGHT 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL/FAX Adjustment of automatic stop Fig. 7 Note! The position of the gear MAG Press the pin in with a finger and rotate gear clockwise on until release arm falls into the first recess under gear At the same time this takes place the stop on plate has to fall into the recess on dial This relation will be adjusted by turning the dial. When the correct position is reached the screws shall be tightened and secured with safety lacquer (Fig. 9) Stop Fig. 8 COPYRIGHT 1 ANDERS ENGST Östra vägen HÖNÖ Adjustment of eccentric MAG With eccentric you can easily increase or reduce the distance between the mark (double arrow) at the backing paper and the position of first exposure. Loosen the screw and rotate the eccentric to the required position and then tighten the screw. Note! The screw shall be secured with loctite. In fig. 9 you can see the basic position of the eccentric, which is set to fit our reference film (Kodak Plus-X). Release arm Eccentric (basic pos.) Fig. 9 COPYRIGHT ANDERS ENG Östra vägen HÖNÖ Revision 2 February 2000

10 Film magazines series A, E and TCC Reassembly 2:4 Right cover (see page 13) Fit the cover, secure with 3 screws and put the leather back. Fit the magazine slide holder when necessary. Spool holder (see page 15 and 16) CAUTION! When handling the circuit board a grounded bench mat and a wrist strap must be used to prevent ESD damage. MAGS Fit the support and end plate with 4 screws (secured with loctite). Thread the 4 cables through the end plate and solder them on the circuit board. Press the circuit board on to the end plate, and if necessary, replace the tape Fit the dials, indicators, cover, leather and rubber plate. Fit the felt ring , thread the washer over the lock and fit it as well as the film signal into the spool holder, together with gear so that you will get a red indication in the film indicator (exact adjustment will be set later), fasten the locking handle with clip Fit the 2 rollers 13514, locking shaft and spring Adjustment of film indicator Fig. 10 COPYRIGHT ANDERS ENG Östra vägen HÖNÖ MAGS Fit the plate and take-up arm 22398, connect spring Place the film indicator gauge V-5065 (magazine 12 and 16) or V-5068 (magazine 24) on the feeding side of the spool holder. Adjust the indicator by holding the gear in place and thereafter turn the shaft of the film signal to the position as shown in the diagram (Fig. 10). Take the film indicator gauge off and check that the film signal is changing to fully red (Fig. 11). Secure the gear to the shaft with safety lacquer. Fit the contact assembly in plate with 2 screws Loosen the screws somewhat, lift up plate and fit the plate spring and the pressure plate , then tighten the screws Fig. 11 COPYRIGHT ANDERS ENG Östra vägen HÖNÖ Revision 1 February 2000

11 Film magazines series A, E and TCC Reassembly 2:5 Final checks Insert the spool holder in to the magazine, advance and check that the automatic stop is functioning (first exposure). Adapt the magazine on a camera body and make some test exposures. Check that the film counter, exposure signal, etc. are functioning. Take the spool holder out and check that the film counter sets to zero. Load the magazine with film and check the spacing i.e. that you after every exposure are making a mark on the film inside the picture frame and then check the placing of the "exposures". Check also that the film indicator gradually changes from white to red as the film is wound through. After the repair of E or TCC magazine the speed and film contrast dials shall be checked. Adapt the magazine on a 203FE or a 205FCC camera and connect it to the Hasselblad Service Test System. Choose the function "203/205" from the main menu, then choose the function "MAGAZINE" from the sub menu. Turn the ISO dial and the film contrast dial from 12 to 6400 and from -4 to +3 respectively and back again. May 1997

12 S W E D E N Magazine A12, A16, A16S, A24 3 COPYRIGHT ' 2000 ANDERS ENGSTRM ANDERS ENGSTRM, ILLUSTRATR stra vgen H N tel/fax anders @telia.com MAGA1220.EPS Revision 1 January 2001

13 Magazine A12, A16, A16S, A24 3 Pos No. Pcs Spare Part No. Description Remark Washer Screw Plate Spring Shaft Spring Spring Arm Spring Release arm A12, A16, A16S Release arm A Washer Spring Pin Spring Pin Stop screw A12, A Screw Dial A Dial A16, A16S Dial A Spring Spacing gear A Spacing gear A16, A16S Spacing gear A16, Serial No. 31ET fwd Spacing gear A Center mechanism A12, A16, A16S Center mechanism A Light seal Tape Spring Signal Tape washer Cover plate Light seal Exposure lock Spring Plate spring Magazine support A12, A Magazine support A Magazine support A16S Picture frame A Picture frame A Picture frame A16S Rivet Light seal A Tape A Foil Light trap 39 1 Z Magazine slide Pin Ribbon Revision 1 January 2001

14 Magazine A12, A16, A16S, A24 3 Pos No. Pcs Spare Part No. Description Remark Outer plate Please state serial No Outer plate Previous type outer plate, Screw please see Service Info 6/ Spring Locking arm Locking spring Spring Return stop Washer Gear Clip Screw Screw Bracket Link Hub Spring Spring housing Spring Spring Gear Shaft Gear assembly A Gear assembly A16, A16S Gear assembly A Cover Previous type cover Screw A16, A16S Eccentric A16, A16S Revision 1 January 2001

15 Magazine A12, A16, A16S, A24 4 MAGA1210.EPS MADE IN SWEDEN BY VICTOR HASSELBLAD AB COPYRIGHT 1995 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL May 1997

16 Magazine A12, A16, A16S, A24 4 Pos No. Pcs Spare Part No. Description Remark Leather Name plate A Name plate A Name plate A16S Name plate A Cover right, complete A12 chrome Cover right, complete A12 black Cover right, complete A16, A16S, A24 chrome Cover right, complete A16, A16S, A24 black Screw Pin Handle Crank mounting Spring Leather Tube Screw Film indicator Tape Leather Shell Chrome Shell Black Screw Light seal Teflon washer Button Sign plate A Sign plate A Sign plate A16S Sign plate A Screw Light seal Below Serial No. 30EI Cover Previous type Film indicator Rivet Plate spring Shaft May 1997

17 Magazine A12, A16, A24 (Modified 1996) 5 MAGA1212.EPS COPYRIGHT 1995 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL May 1997

18 Magazine A12, A16, A24 (Modified 1996) Pos No. Pcs Spare Part No. Description Remark Film indicator Tape Leather Screw Light seal Shell Chrome Shell Black Teflon washer Button Leather Screw Name plate A Name plate A Name plate A Screw Tube Screw Leather Spring Pin Crank mounting Handle Cover right, complete A12 chrome Cover right, complete A12 black Cover right, complete A16, A24 chrome Cover right, complete A16, A24 black Leather May 1997

19 Magazine A12, A16, A24 6 COPYRIGHT 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL MAGE1215.EPS May 1997

20 Magazine A12, A16, A24 6 Pos No. Pcs Spare Part No. Description Remark Film indicator Tape Dark slide holder Shell Chrome Shell Black Support Screw May 1997

21 123 Magazine A12, A24 Serial No. TR RI MAGA1240.EPS COPYRIGHT 1995 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL Revision 2 January 2001

22 Magazine A12, A24 Serial No RI Pos No. Pcs Spare Part No. Description Remark Arm Holder Locking shaft Cover Number plate Please state serial No Screw Name plate Spool center Sealing cord Roller Journal Film guide Screw Leather Spring Screw Lock Clip Felt ring Washer 0.1 mm Washer 0.2 mm Washer 0.5 mm Shim Alt or Shim End plate Chrome End plate Black Washer 0.2 mm Screw Film guide Plate spring Intermed. part + End plate Chrome Intermed. part + End plate Black Plate Window Film signal Screw Spring Spring Spring Spring Screw Bracket Gear Screw Please note! Parts assortment for this type of spool holder is now reduced. Parts not specified above are not available any more. Revision 2 January 2001

23 123 Magazine A12, A24 Serial No. RI forwards 8 COPYRIGHT 1998 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL MAGA1241.EPS Revision 1 September 1999

24 Magazine A12, A24 Serial No. RI forwards 8 Pos No. Pcs Spare Part No. Description Remark Take-up arm Plate Roller Number plate Please state serial No Screw Name plate Spring Plunger Roller Hub Bushing Film guide Sealing cord End plate Chrome End plate Black Screw Locking washer Washer Spring Screw Spring Screw Lock Plate Window Film signal Clip Sleeve Felt ring Washer 0.1 mm Washer 0.2 mm Washer 0.5 mm Leather Shim Alt or Shim Film guide Journal Spool center Clip Pressure plate Plate spring Screw Bracket Spring Gear Plunger Intermed. part + End plate Chrome Intermed. part + End plate Black Spring Spring Locking shaft Screw Spool holder, compl. Chrome Spool holder, compl. Black Revision 2 February 2000

25 123 Magazine A16, A16S Serial No. UV EP MAGA1640.EPS COPYRIGHT 1995 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL Revision 2 January 2001

26 Magazine A16, A16S Serial No. UV EP Pos No. Pcs Spare Part No. Description Remark Plate, compl Arm Holder Plate Locking shaft Cover Number plate Please state serial No Screw Name plate Sealing cord Roller Journal Film guide Screw Leather Spring Screw Lock Plate Window Film signal Clip Felt ring Washer 0.1 mm Washer 0.2 mm Washer 0.5 mm Shim Alt or End plate Chrome End plate Black Film guide Plate spring Screw Washer Screw Pressure plate Guide plate Spring Intermed. part + End plate Chrome Intermed. part + End plate Black Spring Spring Spring Screw Bracket Gear Screw Spool holder, compl. Black Please note! Parts assortment for this type of spool holder is now reduced. Parts not specified above are not available any more. Revision 3 January 2001

27 123 Magazine A16 (Serial No. 31EP forwards), A32 10 COPYRIGHT 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ tel/fax [email protected] MAGA1243.EPS Revision 1 September 1997

28 Magazine A16 (Serial No. 31EP forwards), A32 10 Pos No. Pcs Spare Part No. Description Remark Take-up arm Plate Roller Number plate Please state serial No Name plate Spring Plunger Roller Screw Washer Spring Coupling Washer Journal Film guide Spring Screw Lock Plate Window Film signal Clip Felt ring Washer 0.1 mm Washer 0.2 mm Washer 0.5 mm End plate Intermed. part Film guide Pressure plate Spring Screw Bracket Spring Gear Spool center Screw Clip Plunger Spring Spring Locking shaft Screw Sealing cord Spool holder, complete chrome Spool holder, complete Black Revision 1 September 1997

29 Magazine A16 Serial (No. 31EP forwards) 11 MAGA = Loctite 243 May 1997

30 Magazine A16 (Serial No. 31EP forwards) Pos No. Pcs Spare Part No. Description Remark Leather Screw Cover Chrome Cover Black Screw Screw Serial No. 31ET fwd please see Service Info 10/96 May 1997

31 S W E D E N Magazine A12/16/24TCC, E12/16/24, E12CC 12 COPYRIGHT ' 2000 ANDERS ENGSTRM ANDERS ENGSTRM, ILLUSTRATR stra vgen H N tel/fax anders @telia.com MAGE1220.EPS Revision 1 January 2001

32 Magazine A12/A16/A24TCC, E12/16/24, E12CC 12 Pos No. Pcs Spare Part No. Description Remark Washer Screw Plate Spring Shaft Spring Spring Arm Spring Release arm 12, Release arm Washer Spring Pin Spring Pin Stop screw 12, Screw Dial Dial Dial Spring Spacing gear Spacing gear Spacing gear E16, Serial No. 37ET fwd Spacing gear Center mechanism 12, Center mechaniam Light seal Tape Spring Signal Tape washer Contact flex Tape Washer Cover Light seal Exposure lock Spring Plate spring Magazine support 12, Magazine support Picture frame 12, Picture frame Rivet Light seal Tape Foil Light trap 41 1 Z Magazine slide Pin Ribbon Revision 1 January 2001

33 Magazine A12/A16/A24TCC, E12/16/24, E12CC 12 Pos No. Pcs Spare Part No. Description Remark Outer plate Please state serial No Outer plate Previous type outer plate Screw please see Service Info 6/ Spring Locking arm Locking spring Spring Return stop Washer Gear Clip Screw Screw Bracket Link Hub Spring Spring housing Spring Spring Gear Shaft Gear assembly Gear assembly Gear assembly Cover Previous type cover Screw Eccentric 16 Revision 1 January 2001

34 Magazine E12, E16, E24, E12CC 13 MAGE1212.EPS COPYRIGHT 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL May 1997

35 Magazine E12, E16, E24, E12CC 13 Pos No. Pcs Spare Part No. Description Remark Film indicator Tape Dark slide holder Tape Support Leather Screw Light seal Shell Chrome Shell Black Teflon washer Button Leather Screw Name plate E Name plate E Name plate E Name plate E12CC Screw Tube Screw Leather Spring Pin Crank mounting Handle Cover right, complete E12, E12CC chrome Cover right, complete E12, E12CC black Cover right, complete E16, E24 chrome Cover right, complete E16, E24 black Leather May 1997

36 Magazine E12, E16, E24, E12CC (Modified 1996) 14 COPYRIGHT 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL MAGE1215.EPS May 1997

37 Magazine E12, E16, E24, E12CC (Modified 1996) 14 Pos No. Pcs Spare Part No. Description Remark Film indicator Tape Dark slide holder Shell Chrome Shell Black Support Screw May 1997

38 Magazine A12TCC, A16TCC, A24TCC 15 MAGF1211.EPS COPYRIGHT 1995 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL May 1997

39 Magazine A12TCC, A16TCC, A24TCC 15 Pos No. Pcs Spare Part No. Description Remark Film indicator Tape Leather Screw Light seal Shell Chrome Shell Black Teflon washer Button Sign plate A Sign plate A Sign plate A Screw Screw Tube Screw Leather Spring Pin Crank mounting Handle Cover right, complete A12 chrome Cover right, complete A12 black Cover right, complete A16, A24 chrome Cover right, complete A16, A24 black Leather Light seal Previous type Light seal May 1997

40 123 Magazine A12/A16/A24TCC, E12/16/24 E12CC 16 MAGF1240.EPS COPYRIGHT 1995 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL May 1997

41 Magazine A12/A16/A24TCC, E12/16/24, E12CC 16 Pos No. Pcs Spare Part No. Description Remark Take-up arm Plate 12, Plate Roller Number plate Please state serial No Name plate Spring Plunger Roller Screw Washer Spring Coupling Washer Journal Film guide 12, Film guide Spring Screw Lock Plate Window Film signal Clip Felt ring Washer 0.1 mm Washer 0.2 mm Washer 0.5 mm End plate 12, End plate Intermed. part 12, Intermed. part Film guide Pressure plate 12, Pressure plate Spring Screw Bracket Spring Gear Spool center Screw Clip Plunger Spring Spring Locking shaft Screw Screw Sealing cord Revision 1 January 2001

42 Magazine A12/A16/A24TCC, E12/16/24, E12CC 16 Pos No. Pcs Spare Part No. Description Remark Spool holder complete 12/24TCC, E12CC chrome Spool holder complete 12/24TCC, E12CC black Spool holder complete 16TCC chrome Spool holder complete 16TCC black Spool holder complete E12, E24 chrome Spool holder complete E12, E24 black Spool holder complete E16 chrome Spool holder complete E16 black Revision 1 January 2001

43 Magazine E12, E16, E24 17 MAGE1250.EPS GREEN BLACK WHITE RED COPYRIGHT 1995 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL = Loctite 243 May 1997

44 Magazine E12, E16, E24 17 Pos No. Pcs Spare Part No. Description Remark Leather Screw Cover Chrome Cover Black Screw ISO indicator Dial Circuit board Tape Spring Steel ball Contact assembly Rubber plate Tape Screw Screw Screw E12, Serial No. 36ET fwd E16, Serial No. 37ET fwd E24, Serial No. 38ET fwd please see Service Info 10/96 Revision 1 September 1999

45 Magazine A12TCC, A16TCC, A24TCC E12CC 18 MAGF1250.EPS GREEN BLACK WHITE RED COPYRIGHT 1995 ANDERS ENGSTRÖM ANDERS = Loctite ENGSTRÖM, 243 ILLUSTRATÖR Östra vägen HÖNÖ TEL May 1997

46 Magazine A12TCC, A16TCC, A24TCC, E12CC 18 Pos No. Pcs Spare Part No. Description Remark Leather Screw Cover Chrome Cover Black Screw ISO indicator Dial Circuit board Tape Contact assembley Rubber plate Tape Indicator Spring Steel ball Screw Screw E12CC, Serial No. 35ET fwd please see Service Info 10/96 May 1997

47 Magazine MAG7020.EPS S W E D E N 14 COPYRIGHT 1991 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra Vägen HÖNÖ TEL May 1997

48 Magazin Pos No. Pcs Spare Part No. Description Remark Magazine support Magazine support Previous type magazine support please see Service Info 6/ Zero button Washer Plate spring Rivet Return stop Pin Light seal Exposure lock Spring Plate spring Foil Light trap 14 1 Z Magazine slide Ribbon Outer plate Please state serial No Outer plate Previous type outer plate please see Service Info 6/ Pin Picture frame Screw Rivet Spring Screw Locking arm Locking spring Cover Revision 1 September 1999

49 Magazine MAG7031.EPS COPYRIGHT 1995 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL May 1997

50 Magazine Pos No. Pcs Spare Part No. Description Remark Screw Name plate Number disc Clip Counter wheel Coil spring Washer Clip Washer Pawl Spring Zero-lever Spring Screw Catch Spring Screw Arm Spring Cam Gear Spring Screw Screw Film signal Spring Catch Spring Exposure signal Clip Spring Pin Spring Cam plate Film feeler Film guide Film feeder Screw Spring Washer Gear Spring Signal catch Coil spring Clip Gear, lower Spring Cam disc Return coupling Gear, top Screw Catch Screw May 1997

51 Magazine Pos No. Pcs Spare Part No. Description Remark Return stop Spring Catch Gear Gear Washer Handle Screw Leather May 1997

52 Magazine MAG7010.EPS MADE IN SWEDEN BY VICTOR HASSELBLAD AB COPYRIGHT 1995 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL May 1997

53 Magazine Pos No. Pcs Spare Part No. Description Remark Cover right, complete Chrome Cover right, complete Black Film indicator Tape Light seal Leather Screw Magazine shell Chrome Magazine shell Black Sealing cord Screw Teflon washer Button Sign plate Screw Memo tablet Window Name plate Ring Counter window Leather Leather Cover Previous type film indicator Rivet Plate spring Shaft May 1997

54 Magazine MAG7040.EPS COPYRIGHT 1995 ANDERS ENGSTRÖM 18 ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL May 1997

55 Magazine Pos No. Pcs Spare Part No. Description Remark Plate, compl Holder Holder Fastening Coupling Tooth wheel Spring Roller, short Number plate Sealing cord Endplate + Intermed. part Chrome Endplate + Intermed. part Black Leather Name plate Shim Lock Spring Screw Leather Clip Felt ring Washer 0.1 mm Washer 0.2 mm Washer 0.5 mm Screw Spring Locking shaft Film guide Journal Plate spring Pressure plate Roller, long Screw 31 Film cassette Code No Spool holder, compl. Chrome Spool holder, compl. Black Revision 1 February 2000

56 Magazine 100 for Polaroid film 23 1 MAGPOLA1.EPS COPYRIGHT 1995 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ TEL/FAX May 1997

57 Magazine 100 for Polaroid film 23 Pos No. Pcs Spare Part No. Description Remark Leather Name plate Chassie Clamp Name plate Developing mechanism 7 Film pack Type 107, 108, 665, 667, 668, Frame Glass plate Screw Light seal Locking spring Glass holder Plate spring Screw Outer plate Please state serial No Screw Ribbon Light seal Light seal Washer Light seal Locking arm Light trap Foil Plate Spring Light seal 29 1 Z Magazine slide Pin Slide holder Pin Film pack holder Revision 2 September 1999

58 Magazine PolaPlus COPYRIGHT 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ tel/fax POLPLU01.EPS May 1997

59 Magazine PolaPlus 24 Pos No. Pcs Spare Part No. Description Remark Leather Chassie Clamp Name plate Developing mechanism 6 Film pack Type 107, 108, 665, 667, 668, Frame Glass plate Screw Light seal Locking spring Glass holder Plate spring Screw Outer plate Screw Ribbon Light seal Light seal Washer Light seal Locking arm Light trap Foil Plate Spring Steel ball Spring Light seal Pin 31 1 Z Magazine slide Pin Film pack holder Please state serial No. and "to be used for PolaPlus" Revision 2 September 1999

60 Magazine PolaBasic COPYRIGHT 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ tel/fax POLBAS01.EPS May 1997

61 Magazine PolaBasic 25 Pos No. Pcs Spare Part No. Description Remark Outer plate Please state serial No. and "to be used for PolaBasic" 2 1 Z Magazine slide Sales code Spare parts not listed are the same as for magazine PolaPlus Revision 2 September 1999

62 COPYRIGHT 1997 ANDERS ENGSTRÖM Magazine A32 ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ tel/fax MAGA3220.EPS Pretensioned 3 turns Loctite S W E D E N September 1997

63 Magazine A32 26 Pos No. Pcs Spare Part No. Description Remark Washer Screw Plate Spring Shaft Spring Spring Arm Release arm Spring Spring Screw Dial Spring Shade Spring Spacing gear Washer Spring Pin Clip Pin Spring Center mechanism Screw Catch Washer Stop Spring Tape Light seal Signal Tape washer Cover plate Exposure lock Spring Plate spring Magazine support Foil Light trap 41 1 Z Magazine slide Picture frame Light seal Tape Light seal Rivet Pin Ribbon Outer plate Please state serial No Screw Spring Locking arm Locking spring September 1997

64 Magazine A32 26 Pos No. Pcs Spare Part No. Description Remark Spring Return stop Washer Gear Screw Screw Bracket Link Hub Spring Spring housing Spring Spring Gear Shaft Gear assembly September 1997

65 Magazine A32 27 COPYRIGHT 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen HÖNÖ tel/fax MAGA3212.EPS September 1997

66 Magazine A32 27 Pos No. Pcs Spare Part No. Description Remark Film Indicator Tape Dark slide Holder Support Leather Screw Light seal Screw Teflon washer Button Leather Screw Shell Chrome Shell Black Name plate Screw Tube Screw Leather Spring Pin Crank mounting Handle Cover right, complete Chrome Cover right, complete Black Leather September 1997