PRESSURE TRANSMITTER ATM
|
|
- Noreen McDaniel
- 7 years ago
- Views:
Transcription
1 PRESSURE RNSMER M 23 eatures Compact and robust stainless steel assembly (316L) Piezoresistive measuring element Gauge, absolute or sealed gauge Standard DN pressure ranges from mbar to bar Calibration available for all common pressure units Complies with the EMC directive EN Reverse polarity and short circuit protected Media temperature up to 150 C (option) Surge (lightning) protection according to EN (option) ypical applications Drucktransmitter mit piezoresitivem Machine installations Messelement. ndustrial process control Heating and ventilation Environmental monitoring ood industry Mobile hydraulics est and calibration systems - feel the Difference
2 Specifications Pressure range [bar] > > 2 25 > > Overpressure 3 bar 3 x S 3 x S 3 x S 1500 bar (min. 3 bar) (max. 850 bar, optional 1500 bar) Burst pressure [bar] > 200 > 200 > 200 > 850 > 1500 (optional 1500 bar) ccuracy 1) [± % S] (optional 0.25) (optional 0.25, 0.1) (optional 0.25, 0.1) (optional 0.25, 0.1) (optional 0.5, 0.25) hermal shift [± % S/ C] Zero 0 70 C C Span 0 70 C C Response time Output signal 4 20 m 0 20 m 0 5 V / 0 10 V ype wo wire current transmitter hree wire current transmitter hree wire voltage transmitter Supply voltage 9 33 V DC 9 33 V DC V DC Supply voltage influence < 0.1% S < 0.1% S < 0.1% S Circuit diagram < 1 ms/10 90% S Long term stability (1 year) - (typ./max.) <0.5% S/<4 mbar <0.2% S/<4 mbar <0.1% S/<0.2% S <0.1% S/<0.2% S <0.1% S/<0.2% S 1) Zero based non-conformity according to DN 16086, including hysteresis and repeatability Load resistance [Ohm] 1000 R L < U B[V] - 9V 0.02 [Ohm] 1000 R L < U B[V] - 6V 0.02, 1kOhm max R L > 10kOhm R L R L [V] U B [V] U B Load resistance influence < 0.1% S < 0.1% S < 0.1% S Materials Process connection, diaphragm, housing Stainless steel (316L) other materials (e.g. titanium) on request Seals (standard) Viton (other materials see ordering information) 0 Electromagnetic compability Standard Emission: EN Generic emission standard EN Emission, class B Level ypical interferences mmunity: EN Generic immunity EN Electrostatic discharge 4kV contact, 8kV air EN Radiated electro-magnetic field 10V/m, MHz, 80% M 1kHz Cellular phones, radio sets EN Radiated electro-magnetic field (GSM) 10V/m, 950 MHz, 200Hz on/off Digital portable phones EN ast transients (burst) 2 kv Motors, valves EN Conducted radio-frequency 10V, MHz, 80% M 1kHz Cellular phones, radio sets EN Surge 10 k (8/20 ms) 2) Lightning strikes 2) Only with optional surge (lightning) protection he pressure transmitter M fulfils the emission and immunity requirements described in the EMC directive EN
3 Ordering nformation ype M 23 Pressure type Gauge 1 bsolute 2 Sealed gauge 3 23 X. XXXX. XXXX. XX. XXX Pressure range mbar mbar mbar mbar mbar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar 3 20 Special calibration 99 Process connection G 1/4 female (ig. 1) 00 G 1/4 M (ig. 2) 11 G 1/4 M, Manometer DN (ig. 3) 12 G 1/2 M (ig. 4) 13 G 1/2 M, frontal diaphragm (ig. 5) 14 G 1/2 M, flush diaphragm (ig. 6) 15 G 1/2 M, Manometer DN (ig. 7) 16 1/4 NP M 10 1/2 NP M (ig. 8) 19 Special process connection 99 Electrical connection Connector DN (screwed on 3) ) 5) (ig. 10) P Connector Binder 723, 5-pin 5) (ig. 11) P Connector Binder 723, 5-pin (screwed on 3) ) 5) (ig. 12) P Connector ML C26482, (10-6) 5) (ig. 13) P PE cable 6) 7) 8) (ig. 14) P PUR cable 6) 7) (ig. 14) P eflon cable 6) (ig. 14) P Special electrical connection 99 Output signal 0 5 V DC V DC m m m surge (lightning) protection V DC surge (lightning) protection 49 Special output signal 99 ccuracy ± 0.5 % S 0 ± 0.25 % S 1 ± 0.1 % S (on request) 2 emperature range Compensated 0 70 C (medium temperature 0 80 C) 0 Compensated C (medium temperature C) 7) 1 Compensated C (medium temperature C) 7) 2 Special temperature range 9 Options hrottle 4) Electronics packed in gel: Gauge pressure C bsolute and sealed gauge pressure D Special oil filling in the D: SEOL ood G Halocarbon H Seals: Viton (Standard) U EPDM S Kalrez Special options Z 3) Zero offset and span adjustable 4) vailable only with fig. 2, fig. 4 or fig. 7 5) Cable socket connector not included 6) Please specify the required cable length 7) or medium temperature > 50 C a teflon cable must be used 8) Suitable for drinking water (food approved)
4 Pressure Connection Dimensions Electrical Connection G 1/4 Version for medium temperature up to 100 C Ø Pin 2-Wire 3-Wire 1 +Vin +Vin 2 Pout Pout 3 GND G 1/4 M 12 32,5 ig. 1 L = 40 mm for connector DN (ig. 10) L = 45 mm for all other versions L = 94 mm for version with surge (lightning) protection L ig ,5 ig G 1/4 M Version for medium temperature up to 150 C ig ,5 ig. 3 Ø24 Cable socket connector G 1/2 M 13,5 32,5 20,5 ig. 4 L L = 67 mm for connector DN (ig. 10) L = 72 mm for all other versions L = 121 mm for version with surge (lightning) protection Pin 2-Wire 3-Wire 1 Pout Pout 3 +Vin +Vin 4 GND 74.5 G 1/2 M Ø18,4 ig ,5 ig. 5 Cable socket connector 19,5 B G 1/2 M Ø18,4 C D E 25 33,5 ig. 6 ig Pin 2-Wire 3-Wire +Vin +Vin B GND C Pout Pout 1/2 NP M G 1/2 M ig. 7 ig. 14 PG9 Colour 2-Wire 3-Wire white +Vin +Vin yellow Pout GND brown Pout 31,5 Switzerland SS Sensor echnik Sirnach G Rütihofstrasse 8 CH Sirnach e ig. 8 Release 02/2003 Germany taly rance Specifications may change without notice. DED011 SS Sensoren ransmitter Systeme GmbH Mercedesstrasse 1 D Sindelfingen e SS talia s.r.l. Via Gesù Opera (M) e SS rance 66, venue de la Gare R nnemasse er
5 PRESSURE RNSMER OR LEVEL MESUREMEN M/N 22 eatures ypical applications Compact and robust stainless steel assembly (316L) or titanium (optional) Piezoresistive measuring element Gauge or absolute Standard DN pressure ranges from mbar to 0 25 bar Calibration available for all common pressure units mh2o, mws, mwc etc. High reliability Short delivery time Customized versions due to modular assembly vailable with PE, PUR or eflon cable Low current consumption due to the high input impedance (data logger) Depth and level measurement in Wells Bore holes Waste water Reservoirs Lakes, rivers Sewage treatment plant - feel the Difference
6 Specifications Pressure range [bar] > > 2 25 Overpressure 3 bar 3 x S 3 x S (min. 3 bar) Burst pressure [bar] > 200 > 200 > 200 ccuracy 1) [± % S] (optional 0.25) (optional 0.25) (optional 0.25) hermal shift [± % S/ C] Zero 0 70 C C Span 0 70 C C Long term stability (1 year) < 4 mbar < 4 mbar < 0.2% S 1) Zero based non-conformity according to DN 16086, including hysteresis and repeatability Electrical data Pressure range [bar] 0.1 < < <1 1 < ull scale signal [mv] (at 10V DC voltage supply) Electrical connection Connection +Vin +Out GND - Out nput impedance Bridge resistance > 10 kohm 3 kohm, typ. Materials Process connection, diaphragm, housing Stainless steel (316L) or titanium (optional) Seals (standard) Viton (other materials see ordering information)
7 Ordering nformation ype M/N 22 Pressure type Gauge 1 bsolute 2 22 X. XXXX. XX99. XX. XXX Pressure range 6) mbar mbar mbar mbar mbar bar bar bar bar bar bar bar bar 12 Special calibration 99 Version Closed version (ig. 1) 55 Open version (ig. 2) 56 G 1/4 M (ig. 3) 11 G 1/2 M (ig. 3) 13 Special version 3) 99 Electrical connection Connector for option level transmitter, connectable 4) (ig. 4) 99 PE cable 1) 2) 5) 13 PUR cable 1) 2) 15 eflon cable 1) 21 Output signal 0 to... mv (specified by the customer) 99 ccuracy ± 0.5 % S 0 ± 0.25 % S (on request) 1 emperature range Compensated 0 70 C (media temperature 0 80 C) 2) 0 Compensated C (media temperature C) 2) 1 Special temperature range 9 Options Execution titanium K Ballast weight B Seals: EPDM S Kalrez Special options Z 1) Please specify the required cable length and media 2) or media temperature > 50 C a teflon cable must be used 3) Other executions or process connections on request 4) Connector with required cable has to be ordered separately 5) Suitable for drinking water (food approved) 6) mh2o, mws, mwc ets. available
8 Dimensions ig. 1: Closed version ig. 2: Open version ig. 3: with process connection ig. 4: Electrical connection, connectable Ø6 PE, PUR cable Ø5 eflon cable Ø24 B Ø24 Ø24 Ø24 O-Seal D C [mm] B [mm] C [mm] D [mm] Weight [g] without ballast weight on request on request approx. 200 with ballast weight on request on request approx. 450 Colour white yellow brown green +Vin GND +Out - Out Specifications may change without notice. Release 06/01 Switzerland Germany taly represented by
9 PRESSURE RNSMER M 21 eatures Compact and robust stainless steel assembly (316L) Piezoresistive measuring element Gauge, absolute or sealed gauge Standard DN pressure ranges from mbar to bar Calibration available for all common pressure units High reliability Short delivery time Customized versions due to modular assembly Low current consumption due to the high input impedance Media temperature up to 150 C (optional) ypical applications Drucktransmitter mit piezoresitivem Machine installations Messelement. ndustrial process control Heating and ventilation Environmental monitoring ood industry Mobile hydraulics est and calibration systems - feel the Difference
10 Specifications Pressure range [bar] > > 2 25 > > Overpressure 3 bar 3 x S 3 x S 3 x S 1500 bar (min. 3 bar) (max. 850 bar, optional up to 1500 bar) Burst pressure [bar] > 200 > 200 > 200 > (optional up to 1500 bar) ccuracy 1) [± % S] (optional 0.25) (optional 0.25) (optional 0.25) (optional 0.5) hermal shift [± % S/ C] Zero 0 70 C C Span 0 70 C C Response time Electrical data < 1 ms/10 90% S Long term stability (1 year) < 4 mbar < 4 mbar < 0.2% S < 0.2% S < 0.2% S 1) Zero based non-conformity according to DN 16086, including hysteresis and repeatability Pressure range [bar] up to 0.25 > > > > 2.5 ull scale signal [mv] (10V DC voltage supply) Electrical connection Connection +Vin +Out GND - Out nput impedance Bridge resistance > 10 kohm 3 kohm, typ. Materials Process connection, diaphragm, housing Stainless steel (316L) (other materials on request) Seals (standard) Viton (other materials see ordering information)
11 Ordering nformation ype M 21 Pressure type Gauge 1 bsolute 2 Sealed gauge 3 Pressure range mbar mbar mbar mbar mbar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar 3 20 Special calibration X. XXXX. XX99. XX. XXX Process connection G 1/4 female (ig. 1) 00 G 1/4 M (ig. 2) 11 G 1/4 M, Manometer DN (ig. 3) 12 G 1/2 M (ig. 4) 13 G 1/2 M, frontal diaphragm (ig. 5) 14 G 1/2 M, flush diaphragm (ig. 6) 15 G 1/2 M, Manometer DN (ig. 7) 16 1/4 NP M 10 1/2 NP M (ig. 8) 19 Special process connection 99 Electrical connection Connector DN (screwed on 3) ) 5) (ig. 10) P Connector Binder 723, 5-pin 5) (ig. 11) P Connector Binder 723, 5-pin (screwed on 3) ) 5) (ig. 12) P Connector ML C26482, (10-6) 5) (ig. 13) P PE cable 6) 7) 8) (ig. 14) P PUR cable 6) 7) (ig. 14) P eflon cable 6) (ig. 14) P Special electrical connection 99 Output signal 0 to... mv (specified by the customer) 99 ccuracy ± 0.5 % S 0 ± 0.25 % S (on request) 1 emperature range Compensated 0 70 C (media temperature 0 80 C) 0 Compensated C (media temperature C) 7) 1 Compensated C (media temperature C) 7) 2 Special temperature range 9 Options hrottle 4) Special oil filling: SEOL ood G Halocarbon H Seals: EPDM S Kalrez Special options Z 3) Zero offset and span adjustable 4) vailable only with fig. 2, fig. 4 or fig. 7 5) Cable socket connector not included 6) Please specify the required cable length 7) or media temperature > 50 C a teflon cable must be used 8) Suitable for drinking water (food approved)
12 1/2 NP M G 1/2 M G 1/2 M Ø18,4 G 1/2 M Ø18,4 G 1/2 M G 1/4 M G 1/4 M G 1/4 Pressure Connection Dimensions Electrical Connection Version for media temperature up to 100 C Ø Pin 1 +Vin 2 +Out 3 GND - Out 12 32,5 ig ig ,5 ig. 2 Version for media temperature up to 150 C 16 Ø24 ig ,5 ig Cable socket connector 13, ,5 32,5 ig Pin 1 +Out 2 - Out 3 +Vin 4 GND ig ,5 ig. 5 Cable socket connector 19,5 B C D E 25 33,5 ig. 6 ig Pin B C D +Vin GND +Out - Out ig. 7 ig. 14 PG9 Colour white yellow brown green +Vin GND +Out - Out 31,5 ig. 8 Specifications may change without notice. Release 06/01 Switzerland Germany taly represented by
13 RNSDUCER D 10 eatures ypical applications Compact and robust stainless steel assembly (316L) or titanium (optional) Piezoresistive measuring element Gauge, absolute or sealed gauge Suitable for current or voltage excitation High reliability Short delivery time Customized versions due to modular assembly Media temperature up to 150 C Special oil filling on request OEM - feel the Difference
14 Specifications Pressure range [bar] > > 2 25 > > Overpressure 3 bar 3 x S 3 x S 3 x S 1500 bar (min. 3 bar) (max. 850 bar, optional up to 1500 bar) Burst pressure [bar] > 200 > 200 > 200 > (optional up to 1500 bar) ccuracy 1) [± % S] (optional 0.25) (optional 0.25) (optional 0.25) (optional 0.5) hermal shift [± % S/ C] Zero 0 70 C C Span 0 70 C C Long term stability (1 year) < 4 mbar < 4 mbar < 0.2% S < 0.2% S < 0.2% S 1) Zero based non-conformity according to DN 16086, including hysteresis and repeatability Nominal pressure [bar] ypical output signal [mv] (at nominal pressure, 1 m current excitation) Excitation Recommended current excitation Recommended voltage excitation Bridge resistance requency range Critical frequency Vibration Materials Sensor O-Seal General data 1 m DC 10 V DC 3 kohm, typ. 0 10kHz 10kHz, typ. > 30 g (316L), titanium (optional) Viton Supply schedule Sensor Seal O-Seal or O-Seal and thrust ring (ig. 1) Measuring protocol emperature and pressure evaluation -OU (B) Electrical connections B C D E +N -N () (C) -N (E) nsicht view onauf the Pins pin-side +OU (D) Current excitation Compensation Voltage excitation R1 -OU (B) (C) Re () (E) R3 R4 R5 +N R2 (D) +OU -N R1, R2: Resistors for compensation ot the zero temperature coefficient. Only the resistor indicated on the supplied measuring protocol (R1 or R2) has to be inserted into the circuit. R3, R4: Zero-compensation resistors. Only the resistor indicated on the supplied measuring protocol (R3 or R4) has to be inserted into the circuit; the other resistor has to be inserted as a jumper (0 ohm resistor). Re: Resistor for compensation of the temperature coefficient of the sensitivity. his resistor has a standard value of 10 kohm. R5: Potentiometer for the zero-adjustment (recommended value: 100 ohm). R1 -OU (B) 1 2 Re (C) () (E) R3 R4 R5 1 2 Re +N R2 (D) +OU -N
15 Ordering nformation ype D 10 Pressure type Gauge 1 bsolute 2 Sealed gauge 3 Pressure range mbar mbar mbar mbar mbar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar 3 20 other pressure range X. XXXX. XX98. XX. XXX Construction Ø 15mm with flush diaphragm (ig. 1) 60 Ø 19mm with welding ring (ig. 2) 63 Ø 19mm with flush diaphragm (ig. 3) 64 Ø 18.4 mm with welding ring (ig. 4) 67 Ø 18.4 mm with flush diaphragm (ig. 5) 68 Special construction 99 Electrical connection 5 gold plated pins (ig. 6) 30 Special electrical connection 99 Output signal 0 to... mv (according to data sheet) 98 ccuracy ± 0.5 % S 0 ± 0.25 % S (on request) 1 emperature range 0 70 C C 1 Special temperature range 9 Options Special oil filling: SEOL ood G Halocarbon H Vent tube (ig. 7) P Seals: EPDM S Kalrez Execution titanium K Special options Z
16 Dimensions Ø15 Ø Ø18.4 Ø18.4 5x Ø0.45 Ø ig. 1 D15 with flush diaphragm Ø19 ig. 2 D19 with welding ring (frontal) Ø19 ig. 3 D19 with flush diaphragm Ø15 ig. 4 D18 with welding ring (frontal) ig. 5 D18 with flush diaphragm 5 ig. 6 Pin dimensions ig. 7 Vent tube dimensions (optional) Specifications may change without notice. Release 06/01 Switzerland Germany taly represented by
17 PROGRMMBLE PRESSURE RNSMER PM (RS485) 43 eatures Piezoresistive measuring element djustable 1:4 of the nominal range within -5% to +105% S Standard DN pressure ranges from mbar to bar Pressure units adjustable Recalibration function for zero and span djustable time delay Complies with the EMC directive EN Reverse polarity and short circuit protected nterface RS485 (MODBUS) Output: pressure and temperature ctive compensated (option) (Digital temperature compensated) ypical applications Drucktransmitter mit piezoresitivem ndustrial measurement Messelement. Process & Control ood & Beverage Hydraulic est benches - feel the Difference
18 Specifications J J Komp. D D D µc D D seriell /O Pressure range [bar] > > > > Overpressure 3 bar 3 x S 3 x S 3 x S 1500 bar (minimal 3 bar) (maximum 850 bar, optional to 1500 bar) Burst pressure > 200 bar > 200 bar > 200 bar > 850 bar > 1500 bar (optional to 1500 bar) hermal shift [± % S/ C] Zero C C Span C C ctive compensated (Z+S) C 0.01/ / / / /0.015 (typ./max.) C 0.015/ / / / /0.02 ccuracy 1) ± 0.25 % S ± 0.1 % S, 500 mbar ± 0.1 % S, activ compensated (option) 1) Zero based non-conformity according to DN 16086, including hysteresis and repeatability Electrical specifications Supply voltage Range: V DC Supply voltage influence: < 0.1 % S 4-20m 4-20m RS485 nalog Output Standard: RS485 (pressure) and m (pressure) ctiv compensated: RS485 (pressure and temperature) and m (pressure and temperature) Resolution: ± % (analog output), ± 0.01 % (digital output) Output at 4 m: adjustable between -5% S % S Output at 20 m: adjustable between -5% S % S Span: adjustable between 25% S % S, min. 50 mbar djustable time delay: 100 ms, 1 s, 10 s, (standard approx. 30 ms) emperature output (precision): ± 1 C Load resistance R L = U B [V] - 6V / 0.02, 1 kohm max. Load resistance influence < 0.1 % S +Vin GND Pout out (option) B RS485 Protocol MODBUS nterface 3 ) VR199 incl. PC-Program (VR244) Materials Process connection, Diaphragm, Housing Stainless steel (316L) other materials (e.g. titanium) on request Seals (standard) Viton (other materials see ordering code) Electromagnetic compatibility Standard Level Emission: EN Generic emission standard EN Emission, class B ypical interferences mmunity: EN Generic immunity EN Electrostatic discharge 4kV contact, 8kV air EN Radiated electro-magnetic field 10V/m, MHz, 80% M 1kHz Cellular phones, radio sets EN Radiated electro-magnetic field (GSM) 10V/m, 950 MHz, 200Hz on/off Digital portable phones EN ast transients (burst) 2 kv Motors, valves EN Conducted radio-frequency 10V, MHz, 80% M 1kHz Cellular phones, radio sets EN Surge 10 k (8/20 ms) 2) Lightning strikes 2) Only with optional surge (lightning) protection / 3 ) nterface not included he pressure transmitter PM fulfils the emission and immunity requirements described in the EMC directive EN
19 Ordering information ype PM 43 Pressure type Gauge 1 bsolute 2 Sealed gauge 3 43 X. XXXX. XXXX. XX. XXX Pressure range mbar mbar mbar mbar mbar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar 3 20 Customized calibration 99 Process connection G 1/4 female (ig. 1) 00 G 1/4 M (ig. 2) 11 G 1/4 M, Manometer DN (ig. 3) 12 G 1/2 M (ig. 4) 13 G 1/2 M, frontal diaphragm (ig. 5) 14 G 1/2 M, flush diaphragm (ig. 6) 15 G 1/2 M, Manometer DN (ig. 7) 16 1/4 NP M 10 1/2 NP M (ig. 8) 19 Customized process connection 99 Electrical connection Connector Binder 723, 7-pins 2) (ig. 10) P Connector ML C26482, (10-6) 2) (ig. 11) P PE cable 3) 4)5) (ig. 12) P PUR cable 3 )5) (ig. 12) P eflon cable 3) (ig. 12) P Customized connection on request 99 Output signal RS485 (pressure) and m (pressure) 62 RS485 (pressure) and m (pressure) with overvoltage protection 64 RS485 (pressure) and m (p and t) 65 RS485 (pressure) and m (p and t) with overvoltage protection 66 RS485 (pressure) 6) 67 RS485 (pressure) with overvoltage protection 6) 68 ccuracy ± 0.25 % S 1 ± 0.1 % S 2 emperature range 0 70 C compensated (max. medium temperature 0 80 C) C compensated (max. medium temperature C) 1 Customized temperature range 9 Options hrottle 1) Electronic packed in gel: Gauge pressure C bs. and sealed gauge pressure D Special oil filling: SEOL ood G Halocarbon H Seals: Viton (Standard) U EPDM S Kalrez emperature calibration active, C compensated E Special options on request Z 1) Only for process connections fig. 2, fig. 4 or fig. 7 2) Cable socket connector not included 3) Please specify the medium and the required cable length 4) Suitable for drinking water (food approved) 5) or medium temperature >50 C a teflon cable must be used 6) With option E: RS485 (p and t)
20 Process Connection Dimensions Electrical Connection Version for medium temperature up to 100 C ig G 1/ ,5 ig. 1 L = 94 mm, with overvoltage protection = 185 mm L Ø24 View to cable socket connector G 1/4 M G 1/4 M 16 32,5 ig. 2 Version for medium temperature up to 150 C 74.5 G 1/2 M G 1/2 M Ø18,4 35,5 13,5 32,5 20,5 ig. 3 ig. 4 L = 121 mm, with overvoltage protection = 212 mm 62.5 B C D E 34,5 ig. 5 19,5 G 1/2 M Ø18,4 G 1/2 M ,5 ig. 6 ig. 7 ig. 12 PG9 Colour white yellow brown pink green grey RS485 +Vin GND Pout out B 1/2 NP M Pin RS485 1 Pout 2 out 3 +Vin 4 GND B L Ø24 ig. 11 View to cable socket connerctor Pin RS485 +Vin B GND C Pout D out E B 31,5 Switzerland SS Sirnach G Rütihofstrasse 8 CH Sirnach P 0 eh ig. 8 Specifications may change without notice. DED036 Germany SS r Systeme GmbH Mercedesstrasse 1 D Sindelfingen P0 e h taly SS talia s.r.l. Via Gesù Opera (M) P4 e Release 06/2003 rance SS rance 66, venue de la Gare R nnemasse P5 5 e-r
21 PROGRMMBLE PRESSURE RNSMER OR LEVEL MESUREMEN PM/N (RS485) 44 eatures Piezoresistive measuring element djustable 1:4 of the nominal range within -5% to +105% S Standard DN pressure ranges from mbar to 0 25 bar Pressure units adjustable Recalibration function for zero and span djustable time delay Complies with the EMC directive EN Reverse polarity and short circuit protected nterface RS485 (MODBUS) Output: pressure and temperature ctive compensated (option) (Digital temperature compensated) ypical applications Drucktransmitter mit piezoresitivem Depth and level Messelement. measurement in Wells Bore holes Waste water Lakes, rivers Sewage treatment plant Water supply - feel the Difference
22 Specifications J J Comp. D D D µc D D serial /O 4-20m 4-20m RS485 +Vin GND Pout out (option) Pressure range [bar] > > 2 25 Overpressure 3 bar 3 x S 3 x S (min. 3 bar) B RS485 Burst pressure > 200 bar > 200 bar > 200 bar hermal shift [± % S/ C] Zero C C Span C C ctive compensated C (typ./max.) 0.01/ / /0.015 (Z+S) C (typ./max.) 0.015/ / /0.02 ccuracy 1) ± 0.25 % S ± 0.1 % S, 500 mbar ± 0.1 % S, activ compensated (option) 1) Zero based non-conformity according to DN 16086, including hysteresis and repeatability Electrical specifications Supply voltage Range: V DC Supply voltage influence: < 0.1 % S Output Standard: RS485 (pressure) and m (pressure) ctiv compensated: RS485 (pressure and temperature) and m (pressure and temperature) Resolution: ± % (analog output), ± 0.01 % (digital output) Output at 4 m: adjustable between -5% S...105% S Output at 20 m: adjustable between -5% S...105% S Span: adjustable between 25% S % S, min. 50 mbar djustable time delay: 100 ms, 1 s, 10 s, (standard ca. 30 ms) emperature output (precision): ± 1 C Load resistance R L = U B [V] - 6V / 0.02, 1 kohm max. Load resistance influence < 0.1 % S Protocol MODBUS nterface 3) Materials Process connection, Diaphragm, Housing Stainless steel (316L) othe materials (e.g. tianium) on request Seals (standard) Viton (other materials see ordering code) Electromagnetic compatibility Emission: EN EN Standard VR199 incl. PC-Program (VR244) Generic emission standard Emission, class B Level ypical interferences mmunity: EN Generic immunity EN Electrostatic discharge 4kV contact, 8kV air EN Radiated electro-magnetic field 10V/m, MHz, 80% M 1kHz Cellular phones, radio sets EN Radiated electro-magnetic field (GSM) 10V/m, 950 MHz, 200Hz on/off Digital portable phones EN ast transients (burst) 2 kv Motors, valves EN Conducted radio-frequency 10V, MHz, 80% M 1kHz Cellular phones, radio sets EN Surge 10 k (8/20 ms) 2) Lightning strikes 2) Only with optional surge (lightning) protection 3) nterface not included he pressure transmitter PM fulfils the emission and immunity requirements described in the EMC directive EC
23 Ordering information ype PM/N 44 Pressure type Gauge 1 bsolute 2 44 X. XXXX. XXXX. XX. XXX Pressure range 6) mbar mbar mbar mbar mbar bar bar bar bar bar bar bar bar 12 Special calibration 99 Version Closed version (ig. 1) 55 Open version (ig. 2) 56 G 1/4 M (ig. 3) 11 G 1/2 M (ig. 3) 13 Customized version 3) (ig. 3) 99 Electrical connection PE cable 1) 2) 5) P68 13 PUR cable 1) 2) P68 15 eflon cable 1) P68 21 Output signal RS485 (pressure) and m (pressure) 62 RS485 (pressure) and m (pressure) with overvoltage protection 64 RS485 (pressure) and m (p and t) 65 RS485 (pressure) and m (p and t) with overvoltage protection 66 RS485 (pressure) 7) 67 RS485 (presssure) with overvoltage protection 7) 68 ccuracy ± 0.25 % S 1 ± 0.1 % S 2 emperature range 0 70 C compensated (max. medium temperature 0 80 C) 2) C compensated (max. medium temperature C) 2) 1 Customized temperature range 9 Options Version titanium K Ballast weight (260g) B Electronic packed in gel: Gauge C bsolute D Special oil filling: SEOL ood G Halocarbon H Seals: Viton (Standard) U EPDM S Kalrez emperature calibration active, C compensated E Special options Z 1) Please specify the medium and required cable length 2) or medium temperature >50 C a teflon cable must be used 3) Other versions or process connections on request 4) Connector with required cable has to be ordered separately (KR100) 5) Suitable for drinking water (food approved) 6) mh2o, mwg, mwc etc. available 7) With option E: RS485 (p and t)
24 Dimensions ig. 1: Closed version ig. 2: Open version ig. 3: with process connection Ø6 PE, PUR cable Ø5 eflon cable B C Ø24 Ø24 Ø24 Standard [mm] B [mm] C [mm] D [mm] Weight [g] without ballast weight on request* on request* ca. 200 with ballast weight on request* on request* ca. 460 *C: Depending on process connection *D: Depending on process connection or version Variant with overvoltage protection [mm] B [mm] C [mm] D [mm] Weight [g] without ballast weight on request* on request* ca. 280 with ballast weight on request* on request* ca. 540 *C: Depending on process connection *D: Depending on process connection or version Colour white yellow brown rosa green grau RS485 +Vin GND Pout out B Specifications may change without notice. DED035 Switzerland SS Sirnach G Rütihofstrasse 8 CH Sirnach P e Germany SS Systeme GmbH Mercedesstrasse 1 D Sindelfingen P 8 ee taly SS talia s.r.l. Via Gesù Opera (M) P4 e Release 06/2003 rance SS rance 66, venue de la Gare R nnemasse P25 5 e
25 PROGRMMBLE PRESSURE RNSMER OR LEVEL MESUREMEN PM/N (2-wire) 32 eatures Piezoresistive measuring element djustable 1:4 of the nominal range within -5% to +105% Standard DN pressure ranges from mbar to 0 25 bar Calibration available for all common pressure units mh2o, mwg, mwc etc. djustable delay Complies with the EMC directive EN vailable with PE-, PUR- or eflon cable Reverse polarity and short circuit protected ypical applications Drucktransmitter mit piezoresitivem Depth and level Messelement. measurement in Wells Bore holes Waste water Lakes, rivers Sewage treatment plant Water supply - feel the Difference
26 Specifications J Comp. D D µc serial /O D +Vin Pout 4-20 m Pressure range [bar] > > 2 25 Overpressure 3 bar 3 x S 3 x S (min. 3 bar) Burst pressure > 200 bar > 200 bar > 200 bar hermal shift [± % S/ C] Zero C C Span C C ccuracy 1) ± 0.25 % S ± 0.1 % S, 500 mbar 1) Zero based non-conformity according to DN 16086, including hysteresis and repeatability Electrical specifications Supply voltage Range: V DC Supply voltage influence: < 0.1 % S nalog Output Resolution: 12 bit Output 4 m: adjustable between -5% S...105% S Output 20 m: adjustable between -5% S...105% S Span: adjustable between 25% S % S, min. 50 mbar djustable delay: 100 ms, 1 s, 10 s, (standard ca. 30 ms) nterface VR199 incl. PC-Program (VR244) 3) Materials Process connection, Diaphragm, Housing Stainless steel (316L) othe materials (e.g. tianium) on request Seals (standard) Viton (other materials see ordering code) Electromagnetic compatibility Standard Emission: EN Generic emission standard EN Emission, class B Level ypical interferences mmunity: EN Generic immunity EN Electrostatic discharge 4kV contact, 8kV air EN Radiated electro-magnetic field 10V/m, MHz, 80% M 1kHz Cellular phones, radio sets EN Radiated electro-magnetic field (GSM) 10V/m, 950 MHz, 200Hz on/off Digital portable phones EN ast transients (burst) 2 kv Motors, valves EN Conducted radio-frequency 10V, MHz, 80% M 1kHz Cellular phones, radio sets EN Surge 10 k (8/20 ms) 2) Lightning strikes 2) Only with optional surge (lightning) protection 3) nterface not included he pressure transmitter PM fulfils the emission and immunity requirements described in the EMC directive EC
27 Ordering information ype PM/N 32 Pressure type Gauge 1 bsolute 2 32 X. XXXX. XXXX. XX. XXX Pressure range 6) mbar mbar mbar mbar mbar bar bar bar bar bar bar bar bar 12 Special calibration 99 Version Closed version (ig. 1) 55 Open version (ig. 2) 56 G 1/4 M (ig. 3) 11 G 1/2 M (ig. 3) 13 Customized version 3) (ig. 3) 99 Electrical connection Connectable version 4) (ig. 4) P68 07 PE cable 1) 2) 5) P68 13 PUR cable 1) 2) P68 15 eflon cable 1) P68 21 Output signal 4 20 m m with surge protection (lightning) 08 ccuracy ± 0.25 % S 1 ± 0.1 % S, 500 mbar 2 emperature range 0 70 C compensated (max. medium temperature 0 80 C) 2) C compensated (max. medium temperature C) 2) 1 Customized temperature range 9 Options Version titanium K Ballast weight B Electronic packed in gel: Gauge C bsolute D Special oil filling: SEOL ood G Halocarbon H Seals: Viton (Standard) U EPDM S Kalrez emperature compensation active E Special options Z 1) Please specify the medium and required cable length 2) or medium temperature >50 C a teflon cable must be used 3) Other versions or process connections on request 4) Connector with required cable has to be ordered separately (KR100) 5) Suitable for drinking water (food approved) 6) mh2o, mwg, mwc etc. available
28 Dimensions ig. 1: Closed version ig. 2: Open version ig. 3: with process connection ig. 4: Electrical connection, connectable Ø6 PE, PUR cable Ø5 eflon cable Ø24 B C Ø24 Ø24 Ø24 O-Seal D Standard [mm] B [mm] C [mm] D [mm] Weight [g] without ballast weight on request* on request* ca. 200 with ballast weight on request* on request* ca. 460 *C: Depending on process connection *D: Depending on process connection or version Colour white yellow 2-wire +Vin Pout Specifications may change without notice. DED034 Switzerland SS Sirnach G Rütihofstrasse 8 CH Sirnach P e Germany SS Systeme GmbH Mercedesstrasse 1 D Sindelfingen P ede n taly SS talia s.r.l. Via Gesù Opera (M) P e Release 02/2003 rance SS rance 66, venue de la Gare R nnemasse P25 5 efr
29 PROGRMMBLE PRESSURE RNSMER PM (2-wire) 40 eatures Piezoresistive measuring element djustable 1:4 of the nominal range within -5% to +105% Standard DN pressure ranges from mbar to bar Calibration available for all common pressure units djustable delay Complies with the EMC directive EN Reverse polarity and short circuit protected ypical applications Drucktransmitter mit piezoresitivem ndustrial measurement Messelement. Process & Control ood & Beverage Hydraulic est benches - feel the Difference
30 Specifications J Comp. D D µc serial /O D +Vin Pout 4-20 m Pressure range [bar] > > > > Overpressure 3 bar 3 x S 3 x S 3 x S 1500 bar (minimal 3 bar) (maximum 850 bar, optional to 1500 bar) Burst pressure > 200 bar > 200 bar > 200 bar > 850 bar > 1500 bar (optional to 1500 bar) hermal shift [± % S/ C] Zero C C Span C C ccuracy 1) ± 0.25 % S ± 0.1 % S, 500 mbar 1) Zero based non-conformity according to DN 16086, including hysteresis and repeatability Electrical specifications Supply voltage Range: V DC Supply voltage influence: < 0.1 % S nalog Output Resolution: 12 bit Output 4 m: adjustable between -5% S % S Output signal 4 m: adjustable between -5% S % S Span: adjustable between 25% S % S, min. 50 mbar djustable delay: 100 ms, 1 s, 10 s, (standard ca. 30 ms) nterface VR199 incl. PC-Program (VR244) 3 ) Process connection, Diaphragm, Housing Seals (standard) Materials Stainless steel (316L) other materials (e.g. titanium) on request Viton (other materials see ordering code) Electromagnetic compatibility Standard Emission: EN Generic emission standard EN Emission, class B Level ypical interferences mmunity: EN Generic immunity EN Electrostatic discharge 4kV contact, 8kV air EN Radiated electro-magnetic field 10V/m, MHz, 80% M 1kHz Cellular phones, radio sets EN Radiated electro-magnetic field (GSM) 10V/m, 950 MHz, 200Hz on/off Digital portable phones EN ast transients (burst) 2 kv Motors, valves EN Conducted radio-frequency 10V, MHz, 80% M 1kHz Cellular phones, radio sets EN Surge 10 k (8/20 ms) 2) Lightning strikes 2) Only with optional surge (lightning) protection 3 ) nterface not included he pressure transmitter PM fulfils the emission and immunity requirements described in the EMC directive EN
31 Ordering information ype PM 40 Pressure type Gauge 1 bsolute 2 Sealed gauge 3 40 X. XXXX. XXXX. XX. XXX Pressure range mbar mbar mbar mbar mbar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar 3 20 Customized calibration 99 Process connection G 1/4 female (ig. 1) 00 G 1/4 M (ig. 2) 11 G 1/4 M, Manometer DN (ig. 3) 12 G 1/2 M (ig. 4) 13 G 1/2 M, frontal diaphragm (ig. 5) 14 G 1/2 M, flush diaphragm (ig. 6) 15 G 1/2 M, Manometer DN (ig. 7) 16 1/4 NP M 10 1/2 NP M (ig. 8) 19 Customized process connection 99 Electrical connection Connector DN (screwed on) 2) (ig. 10) P Connector Binder 723, 5-pins 2) (ig. 11) P Connector Binder 723, 7-pins 2) (ig. 11) P Connector ML C26482, (10-6) 2) (ig. 13) P PE cable 3) 4)5) (ig. 14) P PUR cable 3 )5) (ig. 14) P eflon cable 3) (ig. 14) P Customized connection on request 99 Output signal 4 20 m m with surge protection (lightning) 08 ccuracy ± 0.25 % S 1 ± 0.1 % S, 500 mbar 2 emperature range 0 70 C ( C comp., max. medium temp C) C compensated (max. medium temperature C) C compensated (max. medium temperature C) 2 Options hrottle 1) Electronic packed in gel: Gauge pressure C bs. and sealed gauge pressure D Special oil filling: SEOL ood G Halocarbon H Seals: Viton (Standard) U EPDM S Kalrez emperature compensation active E Special options on request Z 1) Only for process connections fig. 2, fig. 4 or fig. 7 2) Cable socket connector not included 3) Please specify the medium and the required cable length 4) Suitable for drinking water (food approved) 5) or medium temperature >50 C a teflon cable must be used
32 Process Connection Dimensions Electrical Connection G 1/4 Version for medium temperature up to 100 C Ø Pin 2-wire 1 +Vin 2 Pout 12 32,5 ig. 1 L = 55 mm for connector DN (ig.10) L ig ,5 ig G 1/4 M Version for medium temperature up to 150 C ig ,5 ig. 3 Ø24 View to cable socket, 5-pins 13, G 1/2 M Ø18,4 G 1/2 M 32,5 20,5 34,5 19,5 ig. 4 ig. 5 L =82 mm for connector DN (ig.10) B C D E 5 G 1/2 M Ø18, ,5 ig G 1/2 M ig. 7 ig. 14 PG9 Colour white yellow 2-wire +Vin Pout 1/2 NP M G 1/4 M L ig. 13 Pin 2-wire 1 Pout 2 3 +Vin 4 5 Pin 2-wire B C D E +Vin Pout 31,5 Switzerland SS Sirnach G Rütihofstrasse 8 CH Sirnach P e ig. 8 Specifications may change without notice. DED033 Germany SS Systeme GmbH Mercedesstrasse 1 D Sindelfingen P0 ede n taly SS talia s.r.l. Via Gesù Opera (M) P74 e Release 02/2003 rance SS rance 66, venue de la Gare R nnemasse P5 er
33 DGL PRESSURE RNSMER DM 28 eatures Compact and robust stainless steel assembly (316L) Piezoresistive measuring element Gauge, absolute or sealed gauge Standard DN pressure ranges from mbar to bar Calibration available for all common pressure units Complies with the EMC directive 89/336/EEC High reliability Short delivery time Customized versions due to modular assembly Reverse polarity and short circuit protected Media temperature up to 150 C (optional) nterface RS232C or RS485 ypical applications Drucktransmitter mit piezoresitivem Machine installations Messelement. ndustrial process control Heating and ventilation Environmental monitoring ood industry Mobile hydraulics est and calibration systems Gas density control - feel the Difference
34 Specifications Pressure range [bar] > > 2 25 > > Overpressure 3 bar 3 x S 3 x S 3 x S 1500 bar (min. 3 bar) (max. 850 bar, optional 1500 bar) Burst pressure [bar] > 200 > 200 > 200 > (optional 1500 bar) ccuracy 1) [± % S] hermal shift [± % S/ C] Zero 0 70 C C Span 0 70 C C Long term stability (1 year) < 4 mbar < 4 mbar < 0.2% S < 0.2% S < 0.2% S 1) Zero based non-conformity according to DN 16086, including hysteresis and repeatability nterface RS232C RS485 Power supply 5 30 V DC 5 30 V DC Current consumption < 7 m < 7 m Circuit diagram +Vin P GND RS232C RxD xd GND P RS485 +Vin GND +RS485 - RS485 Resolution < 0.01% S < 0.01% S ntegration time 1 ms 20 s, adjustable 1 ms 20 s, adjustable dentification Each DM has a serial number and a customer programmable mark Materials Process connection, diaphragm, housing Stainless steel (316L) (other materials on request) Seals (standard) Viton (other materials see ordering information) Electromagnetic compability Standard Emission: EN :1992 Generic emission standard EN 55022:1994 Emission, class B Level ypical interferences mmunity: EN :1995 Generic immunity EN :1995 Electrostatic discharge 4kV contact, 8kV air ENV 50140:1993 Radiated electro-magnetic field 10V/m, MHz, 80% M 1kHz Cellular phones, radio sets ENV 50204:1995 Radiated electro-magnetic field (GSM) 10V/m, 950 MHz, 200Hz on/off Digital portable phones EN :1995 ast transients (burst) 2 kv Motors, valves ENV 50141:1993 Conducted radio-frequency 10V, MHz, 80% M 1kHz Cellular phones, radio sets he pressure transmitter DM fulfill the emission and immunity requirements described in the EMC directive 89/336/EEC.
35 Ordering nformation ype DM 28 Pressure type Gauge 1 bsolute 2 Sealed gauge 3 28 X. XXXX. XXXX. XX. XXX Pressure range mbar mbar mbar mbar mbar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar 3 20 Special calibration 99 Process connection G 1/4 female (ig. 1) 00 G 1/4 M (ig. 2) 11 G 1/4 M, Manometer DN (ig. 3) 12 G 1/2 M (ig. 4) 13 G 1/2 M, frontal diaphragm (ig. 5) 14 G 1/2 M, flush diaphragm (ig. 6) 15 G 1/2 M, Manometer DN (ig. 7) 16 1/4 NP M 10 1/2 NP M (ig. 8) 19 Special process connection 99 Electrical connection Connector DN (screwed on) 3) (ig. 10) P Connector Binder 723, 5-pin 3) (ig. 11) P Connector ML C26482, (10-6) 3) (ig. 13) P PE cable 4) 5) (ig. 14) P PUR cable 4) (ig. 14) P eflon cable 4) (ig. 14) P Special electrical connection 99 nterface RS232C 61 RS ccuray ± 0.25% S (for pressure ranges 500 mbar) 1 ± 0.1 % S (for pressure ranges > 500 mbar) 2 emperature range Compensated 0 70 C (media temperature 0 80 C) 0 Compensated C (media temperature C) 1 Compensated C (media temperature C) 2 Special temperature range 9 Options hrottle 2) Electronics packed in gel: Gauge pressure C bsolute and sealed gauge pressure D emperature measurement (ambient temperature) E Special oil filling: SEOL ood G Halocarbon H Seals: EPDM S Kalrez Special options Z 2) vailable only with fig. 2, fig. 4 or fig. 7 3) Cable socket connector not included 4) Please specify the required cable length 5) Suitable for drinking water (food approved)
36 1/2 NP M G 1/2 M G 1/2 M Ø18,4 G 1/2 M Ø18,4 G 1/2 M G 1/4 M G 1/4 M G 1/4 Pressure Connection Dimensions Electrical Connection Version for media temperature up to 100 C Ø Pin RS232C RS Vin +Vin 2 RxD +RS485 3 GND GND xd -RS ,5 ig. 1 L = 94 mm for connector DN (ig. 10) L ig ,5 ig Version for media temperature up to 150 C ig ,5 ig. 3 Ø24 Cable socket connector 13,5 L ,5 32,5 ig. 4 L = 121 mm for connector DN (ig. 10) Pin RS232C RS485 1 RxD +RS485 2 xd - RS Vin +Vin 4 GND GND 5 ig ,5 ig. 5 Cable socket connector 19,5 B C D E 25 33,5 ig. 6 ig Pin RS232C RS485 +Vin +Vin B GND GND C RxD +RS485 D xd - RS ig. 7 ig. 14 PG9 Colour RS232C RS485 white +Vin +Vin yellow GND GND brown RxD +RS485 green xd - RS485 31,5 ig. 8 Specifications may change without notice. Release 06/01 Switzerland Germany taly represented by
37 PRESSURE RNSMER WH DLOGGER ND DSPLY DL 65 eatures ypical applications Piezoresistive measuring element Standard DN pressure ranges from mbar to bar Calibration available for all common pressure units Complies with the EMC directive EN High reliability Measuring interval programable from 2 s to 24 h Non volatile data memory for 130'000 values Long life battery Datatransfer to a PC/Notebook/Pocket PC ndustrial process control Monitoring of pipelines Environmental monitoring ood industry est and calibration systems Gas- and water distribution - feel the Difference
38 Specifications Pressure range [bar] > > 2 25 > > Overpressure 3 bar 3 x S 3 x S 3 x S 1500 bar (min. 3 bar) (max. 850 bar, optional up to 1500 bar) Burst pressure [bar] > 200 > 200 > 200 > (optional up to 1500 bar) ccuracy 1) [± % S] hermal shift [± % S/ C] Zero 0 70 C C Span 0 70 C C Long term stability (1 year) (typ./max.) 0.5 % S/< 4 mbar 0.2 % S/< 4 mbar 0.1 % S/< 0.2% S 0.1 % S/< 0.2% S 0.1 % S/< 0.2% S 1) Zero based non-conformity according to DN 16086, including hysteresis and repeatability Datalogger Measurand Pressure Resolution Pressure < 0.01% S Real time clock Quartz clock with date, timer functions Data memory 130'000 measurement values - non volatile, data kept in memory even without battery - each measurement value is correlated with time and date nterface nfrared dentification Serial number and user definable description Power supply 2 Lithium batteries 3.6V - battery changeable by user Protection class P 65 (cap closed) PC-Program for Configuration and Data ransfer Configuration and Data ransfer System Requirements BM compatible Notebook or PC, Windows 95/98/N/2000/XP or Pocket PC with Windows CE 2002 or higher Data ransfer - data transfer of last measurement period - data transfer of all data - data transfer for a defined time-period - the data will be represented in a txt-file or in a graph Configuration - storage rate storage interval of records - sampling rate time between two records - time and date - description (e.g. name of location) - timer (start/stop) - tare the actual pressure value can be set to the real value - upper and lower threshold value min./max. value - storage threshold value (option) - density of the medium the density-setting will affect the level range (option) - printer (option) Data ormat Data are stored in SC format and may be read with programs like Excel, Lotus or similar Electromagnetic compability Standard Emission: EN Generic emission standard EN Emission, class B Level ypical interferences mmunity: EN Generic immunity EN Electrostatic discharge 4kV contact, 8kV air EN Radiated electro-magnetic field 10V/m, MHz, 80% M 1kHz Cellular phones, radio sets EN Radiated electro-magnetic field (GSM) 10V/m, 950 MHz, 200Hz on/off Digital portable phones EN ast transients (burst) 2 kv Motors, valves EN Conducted radio-frequency 10V, MHz, 80% M 1kHz Cellular phones, radio sets EN Surge he pressure transmitter DL fulfils the emission and immunity requirements described in the EMC directive EM
39 Ordering nformation ype DL with display 65 Pressure type Gauge 1 bsolute 2 Sealed gauge 3 Pressure range mbar mbar mbar mbar mbar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar bar 3 20 other pressure range X. XXXX. XXXX. XX. X Process connection G 1/4 female (ig. 1) 00 G 1/4 M (ig. 2) 11 G 1/2 M (ig. 3) 13 G 1/2 M, frontal diaphragm (ig. 4) 14 G 1/2 M, flush diaphragm (ig. 5) 15 Special process connection 99 nterface nfrared 2) ccuracy ± 0.25% S (for pressure ranges 500 mbar) 1 ± 0.1 % S (for pressure ranges > 500 mbar) 2 emperature range 0 70 C compensated (media temperature 0 80 C) C compensated (media temperature C) 1 Special temperature range 9 Options hrottle 1) Version titanium K Special oil filling in the D: SEOL ood G Halocarbon H Seals: Viton (standard) U EPDM S Kalrez Special options Z 1) vailable only with pressure connection ig. 2 or ig. 3 2) nfrared data transfer cable not included (ordering code VR144 Process connection, diaphragm Housing Cap Seals (standard) Materials Stainless steel (316L) other materials (e.g. titanium) on request luminium l Mg Si1 (colorless, eloxadized) Plastic POM black Viton (other materials see ordering information)
Datalogger DL/N 70 Version: 28.03.2012
Datalogger DL/N 70 Version: 28.03.2012 Technical Specifications Pressure measuring range (mh20) 1... 5 > 5... 20 > 20... 250 Overpressure 3 bar 3 x FS ( 3 bar) 3 x FS Burst pressure > 200 bar > 200 bar
More informationFeatures. Picture. Specifications
Type: for level measurement Order No.: see Table 1 / Page 4 Features Picture Two wire system Piezoresistive measuring element Output signal 4-20 ma Conformity error ±0.5 % FS or Standard DIN measuring
More informationDMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO from 0... 00 mbar up to 0... 40 bar Output signals
More informationOEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250
MAKING MODERN LIVING POSSIBLE Data sheet OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic
More informationTemperature sensor with integrated transmitter for industrial applications, MBT 3560
Temperature sensor with integrated transmitter for industrial applications, MBT 3560 Technical brochure Features Designed for use in harsh industrial enviroments where reliable, robust and accurate equipment
More informationDigital pressure gauge for industrial applications Model DG-10-S, Standard version Model DG-10-E, Enhanced version
Electronic pressure measurement Digital pressure gauge for industrial applications Model DG-10-S, Standard version Model DG-10-E, Enhanced version WIKA data sheet PE 81.66 Applications Machine building
More informationElectronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm
Electronic pressure measurement Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm WIKA data sheet PE 81.67 Applications Machine tools Hydraulics
More informationOnline data sheet PET-1CB010N10SVMC PET PRESSURE SENSORS
Online data sheet PET-1CB010N10SVMC PET B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Pressure type Measuring range Ordering information Other models and
More informationPressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding
More informationProduct data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS 40.1001 401001/000-459-405-502-20-601-61
Produktdatenblatt - JUMO MIDAS Pressure Transmitter JUMO AS Street address: Solheimveien 50, 1470 Lørenskog, Norway Phone: +47 67 97 37 10 Delivery address: Solheimveien 50, 1470 Lørenskog, Norway Fax:
More informationMCR-VDC-UI-B-DC. Voltage Transducer for DC Voltages. INTERFACE Data Sheet 100260_en_01. 1 Description
Voltage Transducer for DC Voltages TERFACE Data Sheet 000_en_0 PHOENIX CONTACT - /00 Description The MCR voltage transducer measures DC voltages in several signal ranges from 0... ±0 V DC to 0... ±0 V
More informationPD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
More informationAnalog signal converters CC-E I/I Current / current isolators
ata sheet Analog signal converters CC-E I/I Current / current isolators The CC-E I/I is an isolator for the electrical isolation of current signals without auxiliary supply. It allows the isolation between
More informationHow To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
More informationVehicle Brake System Monitoring 2-wire, 4-20 ma option; Intrinsic Safety Approval to E Exia IIC T4 (Tamb=60 C) BASEEFA, CENELEC EN50-020
Field proven rugged construction High overpressure capability High reliability for demanding environments Application specific customization Excellent media compatibility Shock and vibration resistant
More informationTechnical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
More informationConductive Level Switch FK 2 Technical Data:
Level switch for conductive liquids Optional electrode length adjustment Hygienic installation in accordance with EHEDG Wetted parts compatible with FDA requirements Potted electronic Not influenced by
More informationTechnical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
More information38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 SERIES Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical
More informationProcess modules Digital input PMI for 24 V DC inputs for 120 V AC inputs
E031026 000823 Process modules Digital input PMI for inputs for 120 V AC inputs PMI Input E4, E5, GND L- PMI 120 V AC Input E4, E5, Common C E6, E7, GND L- E6, E7, Common C LEDs for the inputs operation
More informationElectronic Pressure Switch EDS 300
Electronic Pressure Switch EDS 300 User manual Page 2 of 16 Content 1. Functions of the EDS 300...3 2. Mounting...3 3. Operating keys on the membrane keypad...4 4. Digital display...4 5. Output function...5
More informationMasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
More informationHand-held thermometer Model CTH7000
Calibration technology Hand-held thermometer Model CTH7000 WIKA data sheet CT 55.50 Applications Precision thermometer for very accurate temperature measurements in a range of -200... +962 C Reference
More information38 SERIES. Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More informationwww.suco.de Electronic Pressure Monitoring New Products
Electronic Pressure Monitoring New Products RoHS compliant Electronic Pressure Switches SoS-Technology with one or two switching functions Electronic Pressure Switches CE marking SUCO Electronic pressure
More informationBM SERIES WAVE COMPACT 6.3 GHZ CW SERIES PULSE RADAR LEVEL INSTRUMENTS (6.3 GHz)
CW SERIES PULSE RADAR LEVEL INSTRUMENTS (6.3 GHz) DESCRIPTION The Radar Level Meters of BM COMPACT WAVE 6.3 GHz series are excellent devices for no contact level measurement. The microwave impulses, emitted
More informationCombi switchbox with integrated 3/2 way pilot valve
H Combi switchbox with integrated 3/2 way pilot valve Construction The GEMÜ combi switchbox with integrated 3/2 way pilot valve for pneumatically operated quarter turn actuators has a micro-processor controlled
More informationDifferential Pressure Sensors for air and non-corrosive gases, with calibration certificate
1 919 1919P01 1919P03 QBM65/C, QBM75-1U/C Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate QBM751-1/C QBM65/C QBM75/C Highly accurate measurements with calibration
More informationPMP 4000 Series. Druck Amplified Output Pressure Transducers. GE Sensing. Applications. Features
Features Applications The PMP 4000 Series provides a complete range of high level voltage output pressure transducers offering advanced levels of measurement accuracy, stability and flexibility from a
More informationGREISINGER electronic GmbH
T38.0.0X.6C-03 CO2 - Transmitter Operating Manual GT10 - CO2-1R GREISINGER electronic GmbH D - 93128 Regenstauf, Hans-Sachs-Straße 26 Tel.: +49 9402 / 9383-0, Fax: +49 9402 / 9383-33, email: info@greisinger.de
More informationElectronic Pressure Switch EDS 3000
For Your Information Electronic Pressure Switch EDS 3000 User Manual Revision: November 01, 2002 1. EDS 3000 Functions The EDS 3000 unit offers the following functions: Display pressure in psi, MPa, or
More informationLED red (-): Measuring value < lower tolerance threshold LED red (+): Measuring value > upper tolerance threshold. Page 1/6
L-LAS Series L-LAS-LT-165-CL - Line laser 1 mw, laser class 2 - Visible laser line (red light 670 nm), typ. 2 mm x 3 mm - Reference distance approx. 165 mm - Measuring range typ. 65... 265 mm - Resolution
More informationWaveguide Access Point WGA631. Product Guide
Waveguide Access Point Product Guide Waveguide Access Point Contents 1. Description............................ 3 2. Application............................ 3 3. Technical data... 4 4. Physical interfaces......................
More informationDuct Humidity Transmitter
SDC-H Duct Humidity Transmitter Features Replaceable sensor element Humidity measurement for air ducts Minimum and maximum value memory 0 0V, 0 0mA or 0V, 4 0mA measuring signals selectable with jumpers
More informationSeries 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement
More informationEncoder WDGI 58H. www.wachendorff-automation.com/wdgi58h
Encoder WDGI H www.wachendorffautomation.com/wdgih Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationOperating Instructions for Plastic Flow Meter. Model: KSK
Operating Instructions for Plastic Flow Meter Model: KSK 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Mechanical Connection...
More informationData Sheet PS1B Pressure Switch
Data Sheet PS1B Pressure Switch Main Features Pressure Ranges 0 to 6 up to 0 to 600 bar (gage) Electrical Connection G 1/4 A DIN 3852-E or -A Pressure Connection Output Signal M12-4 Pin 4-20 ma, Programmable
More information38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
More informationT-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE
T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-Series industrial inclinometers are compact high performance sensors used to determine inclination in roll and pitch axes with excellent precision and
More informationMICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features
Central 48 V DC Power Supplies for PoE-Components MICROSENS Description Active network equipment which is supporting the Power-over-Ethernet functions, typically requires a powerful 48 V DC power supply.
More informationTypical Aluminum GFM Mass Flow Meter
MASS FLOW METERS Design Features n Rigid metallic construction. n Maximum pressure of 1000 psig (70 bars). n Leak integrity 1 x 10-9 of helium. n NIST traceable certification. n Built-in tiltable LCD readout.
More informationThree-phase monitoring relay CM-PFE
Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics
More informationSafety technique. Emergency stop module BO 5988 safemaster
Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1
More informationAutomation System TROVIS 6400 TROVIS 6493 Compact Controller
Automation System TROVIS 6400 TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and process plants for general
More informationRPS 8000. High Accuracy Resonant Pressure Sensor. GE Measurement & Control Solutions. Features:
GE Measurement & Control Solutions RPS 8000 High Accuracy Resonant Pressure Sensor For over 35 years, Druck has manufactured precision pressure sensors with a capability to meet critical applications in
More informationApplication. Characteristics RTU560. Data Sheet Communication Unit 560CMD11. Communication Unit 560CMD11
Communication Unit 560CMD11 The SLC works as master for the RTU560 serial peripheral bus (I/O-Interface/ Wired-OR-Bus ). The MPU is responsible for the other tasks. The MPU handles the absolute time and
More informationType: EASY719 DC RC Article No.: 274119. Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description
Type: EASY719 DC RC Article.: 274119 Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC Description 12 digital inputs (4 inputs available as analog inputs) 6 relay outputs LCD display
More informationContactless Encoder RI360P0-QR24M0-INCRX2-H1181
Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.
More informationMasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - 39 Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic
More informationVOLTAGE/CURRENT CALIBRATOR ISO-TECH ILC-421
VOLTAGE/CURRENT CALIBRATOR ISO-TECH ILC-421 TABLE OF CONTENTS 1. FEATURES... 1 2. SPECIFICATIONS... 1 2-1 General Specifications...1 2-2 Electrical Specifications... 2 3. FRONT PANEL DESCRIPTION... 4 3-1
More informationSHARKY 775 COMPACT ENERGY METER ULTRASONIC
APPLICATION The ultrasonic compact energy meter can be used for measuring the energy consumption in heating / cooling application for billing purposes. FEATURES 4 Approval for ultrasonic meter with dynamic
More informationATL Fuel Level Sender Probes
T E C H N I C A L S P E C I F I C A T I O N The ATL EL-AD-151 (Resistance Output) and EL-AD-152 (Voltage Output) Fuel Level Senders are highly advanced sensors for continuously measuring the contents of
More informationElectronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
More informationSeries 7500 Torque Sensor
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement
More informationRM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters
Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main
More informationDigital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
More informationElectronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order
More information80 Series - Modular timers 16 A. Features 80.01 80.11
80 Series - Modular timers 16 A Features 80.11 Multi-function and mono-function timer range - Multi-function & multi-voltage 80.11 - On-delay, multi-voltage 17.5 mm wide Six time scales from 0.1s to 24h
More informationMaterial: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
More informationModular I/O System Analog and Digital Interface Modules
OPERATING INSTRUCTIONS Modular I/O System Analog and Digital Interface Modules Installation Operation Maintenance Document Information Document ID Title: Operating Instructions Modular I/O System Part
More informationThermistor motor protection
Thermistor motor protection CM-E Range Thermistor motor protection Thermistor motor protection relays Benefits and advantages Selection table Operating principle and fields of application for thermistor
More informationis then retained absolutely without interruption.
Page 1 of 11 DC UPS uninterruptible power supplies - DC UPS module 15 A Compact design, only 50 mm wide Absolutely interruption-free buffering of power failures through immediate electronic connection
More informationVP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional actuation via fieldbus (separate datasheet on request)
More informationSingle-phase (220...240 V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable
Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring Undervoltage, Overvoltage, Window
More informationTechnical Data Sheet OPUS A3 STANDARD Full TDS OPUS A3sF, 03.09.2012
Technical Data Sheet OPUS A3 STANDARD Full TDS OPUS A3sF, 03.09.2012 OPUS A3 Standard Full Landscape OPUS A3 Standard Full Neutral 1 Order Numbers OPUS A3 STANDARD Full Wachendorff Projektor Landscape
More informationHEAT MONITORING AND CONTROL INSTRUMENTS FOR TRANSFORMERS MB 103 TEMPERATURE CONTROL UNIT PT 100 TEMPERATURE SENSOR
HEAT MONITORING AND CONTROL INSTRUMENTS FOR TRANSFORMERS MB 103 TEMPERATURE CONTROL UNIT PT 100 TEMPERATURE SENSOR 2 MB 103 TRANSFORMER TEMPERATURE CONTROL UNIT WITH CONTROL SIGNAL Recent approval of new
More informationProduct Information S N O. Portable VIP protection CCTV & Alarm System 2
Product Information S N O Portable VIP protection CCTV & Alarm System 2 G O V E R N M E N T A L S E C U R I T Y S O L U T I VIP KIT Rapid Deployment VIP Protection Kit The VIP KIT has been designed to
More informationTechnical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output.
Model Number Features Very small housing High climatic resistance 4 Bit multiturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
More informationMAGTROL. ZS Series Load Cell. ZS Data Sheet. Features. Description
Data Sheet Series Load Cell Note: Not available in U.S. Features 0.5 t to 5 t (2 kn to 50 kn) Approved for use in calibrated weighing systems High accuracy (C1, C3 or 0.1 and 0.05) Hermetically-sealed
More informationRelative pressure transmitter type 520
Relative pressure transmitter type 520 Pressure range -1... 9 bar / 0... 2.5 1000 bar The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the
More informationMAGNETOSTICTIVE TRANSDUCER
MGNETOSTICTIVE TRNSDUCER MZ Series Key-Features: Content: Technical Data...2 Technical Drawing...3 Electrical Connection...5 Order Code...7 Options & ccessories...8 - vailable measurement ranges from 50-4000
More information4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
More informationABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.
1SR 430 824 F9300 Features Monitoring of three-phase mains for phase sequence and failure Powered by the measuring circuit 2 c/o (SPDT) contacts 1 LED for status indication Approvals R: yellow LED - relay
More informationMultiViu Flex 7 Data Sheet
Division Interior MultiViu Flex 7 Data Sheet Picture: MultiViu Flex 7 Picture: MultiViu Flex 7 Description CAN-capable multifunction Solution Features: Robust and versatile design CAN-capability (SAE J1939,
More informationSpeed sensor MiniCoder GEL 247
Speed sensor MiniCoder GEL 47 Flange assembly Technical information version 08.0 The MiniCoder family from Lenord + Bauer offers spacesaving solutions for the contactless measurement of rotational movements
More informationAnalogue Input, 4-fold, MDRC AE/S 4.1, GH Q605 0054 R0001
Analogue Input, -fold, MDRC, GH Q605 005 R0001 The analogue input is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via the bus connecting terminal supplied.
More information550658 D. PARAMETER SPECIFICATION Measured Variable: Displacement
T E M P O S O N I C S L S E R I E S LH 550658 D P r o d u c t S p e c i f i c a t i o n s Temposonics L Series position sensors are available with analog outputs (voltage or current) or digital outputs
More informationVert-X 16-5V / 10...90% Ub. Applications Servodrives Dancer arm Operating table
Version MH-C MH-C2 Electrical data Measuring range 0... 360 - Indep. linearity % meas. range ±0.3 - Max. hysteresis 0.1 - Resolution bit 12 - Max. repeatability 0.1 - Sample rate fast mode khz (5) - Sample
More informationDXPE*J 85 320/215 ED. DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK. Q max (see performance table) SERIES 30
85 320/215 ED DXPE*J DIRECtIONAL CONtROL VALVE PILOt OPERAtED, WItH OBE AND FEEDBACK SUBPLAtE MOUNtINg DXPE5J CEtOP P05 DXPE5RJ ISO 4401-05 (CETOP R05) DXPE7J ISO 4401-07 (CETOP 07) DXPE8J ISO 4401-08
More informationVacuum drying oven for non-flammable solvents
VD series 53 Vacuum drying ovens Vacuum drying oven for non-flammable solvents A BINDER vacuum drying oven of the VD series is impressive while gently drying with its homogeneous temperature distribution.
More information15 Series - Electronic step relay and dimmer. Features 15.91 15.51 15.81 SERIE
Series - Electronic step relay and dimmer SERIE Features.91.51.81 Electronic step relay and dimmer for control of lighting levels Suitable for incandescent and halogen lighting loads (with or without transformer
More informationProcessor. Installation Guide
Processor Installation Guide Land Instruments International Dronfield, S18 1DJ England Telephone: (01246) 417691 Facsimile: (01246) 410585 Email: infrared.sales@landinst.com Internet: www.landinst.com
More informationPolyGard Carbon Monoxide CO Transmitter ADTX3 1110
PolyGard Carbon Monoxide CO Transmitter ADTX3 1110 DESCRIPTION CO transmitter including digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air
More informationConfidential. Proportional reducer D386 ATEX. Male base connector View from weld side
Proportional reducer D386 ATEX Classification according Article 3.3 of European Directive n 97/23/CE from 29/05/1997 Classification according group II, category 2 and temperature class T4 of ATEX Directive
More informationCONNECTOR AMPLIFIER FOR PROPORTIONAL VALVES (4-20 ma Input Version)
TECHNICAL DATASHEET #TD1102AX CONNECTOR AMPLIFIER FOR PROPORTIONAL VALVES (4-20 ma Input Version) Part Number: Connector Amplifier CAPV-H-4-20MA-x complete with cable CAPV-4C-yM Where: x = current output
More informationProduct Information. Gateway For Connecting EnDat Encoders to PROFIBUS-DP
Product Information Gateway For Connecting EnDat Encoders to PROFIBUS-DP April 2012 PROFIBUS Gateway For Connecting EnDat Encoders Encoders with EnDat interface for connection via gateway All absolute
More informationAssisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
More informationLENORD. +BAUER... automates motion. PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space
PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space LENORD +BAUER... automates motion. Technical information Version 2014-09 General The PowerDRIVE-Positioning
More informationVoltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationRPS/DPS 8100. High Accuracy Resonant Pressure Sensor. GE Measurement & Control. Features:
GE Measurement & Control RPS/DPS 8100 High Accuracy Resonant Pressure Sensor For over 40 years, Druck has manufactured precision pressure sensors with a capability to meet critical applications in industrial,
More informationMINI MCR-SL-R-UI(-SP)
Resistance/potiposition transducer INTERFACE Data Sheet 0807_en_05 Description PHOENIX CONTACT - 0/008 Features The slim MINI MCR-SL-R-UI... potiposition transducer has a width of only 6. mm and converts
More informationContents. Document information
User Manual Contents Document information... 2 Introduction... 3 Warnings... 3 Manufacturer... 3 Description... Installation... Configuration... Troubleshooting...11 Technical data...12 Device Scope: PCB
More informationHardware Documentation. Data Sheet HAL 202. Hall-Effect Sensor. Edition Sept. 18, 2014 DSH000159_002EN
Hardware Documentation Data Sheet HAL 202 Hall-Effect Sensor Edition Sept. 18, 2014 DSH000159_002EN HAL202 Copyright, Warranty, and Limitation of Liability The information and data contained in this document
More informationSTRATO LED Drivers 70W, Single output
Features STRATO switch mode driver technology is designed to generate one constant current output from a wide range AC input. The size and performance of these products make them the ideal choice for LED
More informationFrequency selective monitoring and logging of environmental electromagnetic fields
FREQUENCY SELECTIVE EMF AREA MONITOR AMS-8060 Frequency selective monitoring and logging of environmental electromagnetic fields Up to 20 fully programmable frequency bands Real built-in spectrum analyser
More informationEZmoto V2. Product description Rev. 6 10/01/2014. EZmoto V2 Product description Rev.6 10/01/2014
EZmoto V2 Product description Rev. 6 10/01/2014 1 Contents 1. Overview... 3 2. Hardware Interface Description... 3 2.1 Main features of the EZmoto... 3 2.2 Hardware block diagram... 4 2.3 Internal Hardware
More informationL-LAS-TB-CL serie. laser light curtains for inline measuring tasks
L-LAS-TB-CL serie laser light curtains for inline measuring tasks Maximum distance 2.000 mm Measurement range 6 up to 98 mm Resolution up to 4 µm up to 1,5 khz scan rate 0-10 V or 4-20 ma analogue output
More information34 Series - Slim electromechanical PCB relays 6 A. Features SERIES 34.51
34 Series - Slim electromechanical PCB relays 6 34 SERIES Features 34.51 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in
More informationTECHNICAL DATASHEET #TD1404AX PWM CONTROLLED SOLENOID DRIVER
TECHNICAL DATASHEET #TD1404AX PWM CONTROLLED SOLENOID DRIVER (PWM Input, 1.2A or 2A Output, Metal Box or PCB) PCB Board - P/N: PWMC-PCB-2A, PWMC-PCB-1.2A Packaged Driver (metal box with 1.5 m (5 ft.) cable)
More information