PRODUCT CATALOGUE AIR COOLED CONDENSING UNIT RA

Transcription

1 PRODUT TLOGUE IR OOLED ONDENSING UNIT R English/

2 IR OOLED ONDENSING UNIT INTRODUTION TO THE RNGE The R air-cooled units are developed from the EOLOGI liquid chiller range and share the same design quality and technological innovations. To meet the requirements of every application, the EOLOGI range is available in 3 versions : Standard (STD) : economical omplete unit, ready for use, benefiting from Lennox design and manufacturing quality Low Noise (LN) : low sound level Low-speed condenser fan and noise-proofed compressor cover. 5 d reduction in sound power level. Super Low Noise (SLN) : one of the lowest noise levels on the market Low-noise condenser fans and sound insulation cabinet for compressors. 15 d reduction in sound power. ONSTRUTION OPTIONS R kw Machine welded framework for enhanced rigidity luzinc sheet casing Protection by Epoxy treatment (RL 9002) Hermetic scroll compressor R407 refrigerant Vertical condenser coils (reduced clogging - easy cleaning) Hushtone condenser fan for high efficiency and low noise level IP55 class F motor ontrol and protection panel according to EN or 2 independent cooling circuits according to size Filter dryer, manual stop valve in liquid line, solenoid valve, HP/P pressure switches HP electronic sensors LIMTI TM electronic controller LIMTI TM ONTROL R22 version ondensers protected with lucoat 507 Pre-coated aluminium lucoat treatment Mainswitch SOFT-Starter Power factor 0,95 Sight glass Removable cartridge drier Removable cartridge drier oversized Suction and discharge isolation valve LP / HP pressure gauges LIMTI TM D 50 comfort display DS 50 maintenance display MODUS Interface Full panel around the unit oil guard Rubber anti-vibration mountings (delivered separately) nti-vibration springs (delivered separately) PID control Start/stop programming - Set point change ompressor operating time balancing Set point adjustment according to external temperature Fault control for each component General alarm with report onnectable to a MS hoice of local or remote digital screens Non contractual photos 1

3 ra GENERL DT - STD VERSION R - Std version R ooling mode ooling capacity (1) kw 158,2 199,2 243, ,4 386,2 bsorbed power (1) kw 70,2 81,4 98,3 122,7 139,3 162,7 OP 2,3 2,4 2,5 2,4 2,2 2,4 Electrical data Voltage V / Ph / Hz 400V/III/50Hz Start-up intensity 299,1 385,8 456,6 500,9 524,8 536,3 Maximum current 129,7 160,4 195,2 239,5 263,3 310,9 Refrigeration circuit Number of circuits Nb ompressor Nb apacity steps Nb Pipe sizes Liquid 7/8" 7/8" 7/8" 1" 1/8 1" 1/8 1" 1/8 Gas 2" 1/8 2" 1/8 2" 1/8 2" 5/8 2" 5/8 2" 5/8 ondenser fan (helicoidal) Number Nb Nominal air flow m 3 /h Total motor power input kw 7, Fan speed tr/mn 1350 coustic Global sound power level (2) d() Operating limits Maximum outside air temperature (3) Minimum outside air temperature (3) 6 Minimum evaporating temperature - 5 (1) Evaporating temperature : 7 - ir : 35 (2) EUROVENT conditions (3) Evaporating temperature : 7 GENERL DT - LN VERSION R - LN version R ooling mode ooling capacity (1) kw 153,5 193,9 235,4 284,3 302,9 370,6 bsorbed power (1) kw 70,1 80,8 99,4 121,9 139,7 165,3 OP 2,2 2,4 2,4 2,3 2,2 2,2 Electrical data Voltage V / Ph / Hz 400V/III/50Hz Start-up intensity 293,7 378,6 449,4 490,1 514,0 525,5 Maximum current 124,3 153,2 188,0 228,7 252,5 300,1 Refrigeration circuit Number of circuits Nb ompressor Nb apacity steps Nb Pipe sizes Liquid 7/8" 7/8" 7/8" 1" 1/8 1" 1/8 1" 1/8 Gas 2" 1/8 2" 1/8 2" 1/8 2" 5/8 2" 5/8 2" 5/8 ondenser fan (helicoidal) Number Nb Nominal air flow m 3 /h Total motor power input kw 7, Fan speed tr/mn 1090 coustic Global sound power level (2) d() Operating limits Maximum outside air temperature (3) Minimum outside air temperature (3) 6 Minimum evaporating temperature - 5 (1) Evaporating temperature : 7 - ir : 35 (2) EUROVENT conditions (3) Evaporating temperature : 7 2

4 GENERL DT - SLN VERSION R - SLN version R ooling mode ooling capacity (1) kw ,1 242,6 295,9 324,7 375,1 bsorbed power (1) kw 62,2 73,1 91,2 109,2 121,5 156,0 OP 2,6 2,7 2,7 2,7 2,7 2,4 Electrical data Voltage V / Ph / Hz 400V/III/50Hz Start-up intensity 288,7 372,6 443,5 480,3 504,1 515,6 Maximum current 119,4 147,2 182,0 218,8 242,6 290,2 Refrigeration circuit Number of circuits Nb ompressor Nb apacity steps Nb Pipe sizes Liquid 7/8" 7/8" 7/8" 1" 1/8 1" 1/8 1" 1/8 Gas 2" 1/8 2" 1/8 2" 1/8 2" 5/8 2" 5/8 2" 5/8 ondenser fan (helicoidal) Number Nb Nominal air flow m 3 /h Total motor power input kw 1,68 2,52 2,52 3,36 3,36 3,36 Fan speed tr/mn 680 coustic Global sound power level (2) d() Operating limits Maximum outside air temperature (3) Minimum outside air temperature (3) 6 Minimum evaporating temperature - 5 (1) Evaporating temperature : 7 - ir : 35 (2) EUROVENT conditions (3) Evaporating temperature : 7 To meet the demands from our customers, we must be reactive and offer both performance and quality. The creation of new products is the heart of this process. To reduce development time and optimise the construction and assembly, we utilise advanced computer aided design system such as 3 dimensional modeling (Pro-Engineer). EOMX - LH 652VK LN EOLOGI - W 150D STD with integral hydraulic module 3

5 ra PHYSIL DT R - Std and LN versions R View mm mm mm Operating weight kg Weight without water kg R - SLN version R View mm mm mm Operating weight kg Weight without water kg

6 ELGIUM, LUXEMOURG : LENNOX ENELUX N.V./S.. ZEH REPULI : LENNOX JNK a.s. FRNE : LENNOX FRNE GERMNY : LENNOX DEUTSHLND GmbH NETHERLNDS : LENNOX ENELUX.V. POLND : LENNOX POLSK Sp. z o. o. PORTUGL : LENNOX PORTUGL Lda. RUSSI : LENNOX DISTRIUTION MOSOW SLOVKI : LENNOX SLOVENSKO s.r.o. SPIN : LENNOX REF S.. UKRINE : LENNOX DISTRIUTION KIEV UNITED KINGDOM, IRELND : LENNOX INDUSTRIES Ltd OTHER EUROPEN OUNTRIES, FRI, MIDDLE-EST : LENNOX DISTRIUTION R-P-0205-E Due to Lennox's ongoing commitment to quality, Specifications, Ratings and Dimensions subject to change without notice and without incurring liability. Improper installation, adjustment, alteration, service or maintenance can cause property damage or personal injury. Installation and service must be performed by a qualified installer and servicing agency.