Annahmebedingungscodes / Englisch für SAIA-Burgess Dresden
|
|
|
- Claribel Hudson
- 9 years ago
- Views:
Transcription
1 Organisationshandbuch Arbeits-/Verfahrensanweisung AA-QD Revision Annahmebedingungscodes / Englisch für SAIA-Burgess Dresden Only the codes of acceptance conditions, which are mentioned as follows and which are available in the system, are allowed to be applied in BDK productions and mutations: 1. General codes of acceptance conditions Code of acceptance condition 0051 Code of acceptance condition 0052 AQL-value by agreement Annotation: AQL-value has to be defined for Acceptance condition C>0 is permitted Code of acceptance condition Variable testing: Stelle Datum Name Unterschrift Erstellt: Geprüft: Freigegeben: AA-QD Rev.04.doc Seite 1 von 5
2 Code of acceptance condition 0054 if requested - Cpk-value (according to the drawing) 2. A producer certificate concerning the fulfilment of the following characteristics has to be attached to the delivery (the belonging measurement records have to be Code of acceptance condition 0055 With specific test report according to EN Code of acceptance condition Variable testing: Code of acceptance condition 0057 AA-QD Rev.04.doc Seite 2 von 5
3 Code of acceptance condition A producer certificate concerning the fulfilment of the following characteristics has to be attached to the delivery (the respective measurement records have to be Code of acceptance condition A producer certificate concerning the fulfilment of the following characteristics has 2. Code of acceptance condition for plastic parts Code of acceptance condition 0060 the AA-QD Rev.04.doc Seite 3 von 5
4 Code of acceptance condition A producer certificate concerning the fulfilment of the following characteristics has Code of acceptance condition A producer certificate concerning the fulfilment of the following characteristics has to be attached to the delivery (the respective measurement records have to be Code of acceptance condition 0063 the AA-QD Rev.04.doc Seite 4 von 5
5 Code of acceptance condition 0064 the Code of acceptance condition A producer certificate concerning the fulfilment of the following characteristics has to be attached to the delivery (the respective measurement records have to be 3. Special codes of acceptance condition Code of acceptance condition 0080 (100% - testing) 1. There has to be a 100% testing of the parts according to the following characteristics. The conditions of acceptance: no defective parts. 2. A producer certificate concerning the fulfilment of the following characteristics has AA-QD Rev.04.doc Seite 5 von 5
.OR.AT.ATTORNEY.AUCTION.BARGAINS.BAYERN.BERLIN.BLACKFRIDAY.BOUTIQUE.BRUSSELS.BUILDERS
.AC.BIO.RESTAURANT.APARTMENTS.CASINO.SCHOOL.KIM.ACADEMY.ACCOUNTANTS.ACTOR.ADULT.AE.AERO.AG.AGENCY.AIRFORCE.ARCHI.ARMY.ASIA.ASSOCIATES.AT.CO.AT.OR.AT.ATTORNEY.AUCTION.AUDIO.BAND.BANK.BAR.BARGAINS.BAYERN.BE.BEER.BERLIN.BID.BIKE.BINGO.BIZ.BLACK.BLACKFRIDAY.BLUE.BOUTIQUE.BRUSSELS.BUILDERS.BUSINESS.BZ.CO.BZ.COM.BZ.ORG.BZ.CAB.CAFE.CAMERA.CAMP.CAPITAL.CARDS.CARE.CAREERS.CASA.CASH.CATERING.CC.CENTER.CH.CHAT.CHEAP.CHRISTMAS
Logistic Manual BMZ GmbH
Logistic Manual BMZ GmbH Requirements on suppliers The Company Batterien Montage Zentrum GmbH (BMZ) Am Sportplatz 28 30 63791 Karlstein am Main Germany Tel. +49 (0)6188 9956-0 Fax +49 (0)6188 9956-900
ZF Net Remote 1.02 Operating Instructions ZFNR Self Service Portal Token Replacement
ZF Net Remote 1.02 Operating Instructions ZFNR Self Service Portal Token Replacement Doc.Version 1.00.5 11.04.2016 FIIN1 Lenkungsinformationen / Control Information Titel: Titel: ZF Net Remote 1.02 Installation
Prüfbericht - Nr.: Test Report No.: 174012161/GZF/01-01
QMA TRLP 6.1-350 Version: 1 01.08.2011 Produkte Products Prüfbericht - Nr.: Test Report No.: 174012161/GZF/01-01 Seite 1 von 6 Page 1 of 6 Auftraggeber: Client: Gegenstand der Prüfung: Test item: SWAN
User documentation. Web Access Prolia_J calculation program. Inhaltsverzeichnis
User documentation ZOLLERN GMBH & CO. KG Ersteller: Lothar.Wagner Datum: 01.04.2010 Web Access Prolia_J calculation program Version: 001 Inhaltsverzeichnis 1 Web Access Prolia_J calculation program...
DECLARATION OF PERFORMANCE NO. HU-DOP_TN-212-25_001
NO. HU-DOP_TN-212-25_001 Product type 212 (TN) 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-35_001 Product type 212 (TN) 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-45_001 Product type 212 (TN)
DECLARATION OF PERFORMANCE NO. HU-DOP_TD-25_001
NO. HU-DOP_TD-25_001 Product type TD 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-35_001 Product type TD 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-45_001 Product type TD 3,5x45 mm EN 14566:2008+A1:2009
ESD Plastic light pallet Doc. Num. N 098 02.03 1200 x 800 x 150 mm Doc. Part 001 Doc. Ver. 01. Contents
Date: 2015-12-16 Page 1 of 8 Contents Changes... 2 Previous Editions... 2 1 SCOPE... 2 2 REFERERCES... 2 3 APPLICATION... 2 4 SPECIFICATION... 3 4.1 Dimensions... 4 4.2 Bending data... 6 4.2.1 Test precondition...
Guidelines for the practical study semester Faculty of Mechatronics and Electrical Engineering
Guidelines for the practical study semester Faculty of Mechatronics and Electrical Engineering in the version dated April 17th 2013 Degree programs Mechatronics / Automation Systems (ATB) Mechatronics
1 Modular System Dual SCM MPIO Software Installation
1 Modular System Dual SCM MPIO Software Installation This document will help you to connect a MAXDATA dual controller SAS disk array with redundant dual connection to both storage controller modules (SCM)
Spezifikation für Freigabe / specification for release
@@FRM @@ Spezifikation für Freigabe / specification for release Artikelnummer / part number : 78 A Mechanische Abmessungen / dimensions: DATUM / DATE : -- size 8 B c A b d C e a A, ±, mm B, ±, mm C,8 ±,
This is Document Schedule 5 Part 1 referred to in this Contract SCOTTISH MINISTERS REQUIREMENTS SCHEDULE 5 PART 1 QUALITY MANAGEMENT SYSTEM
This is Document Schedule 5 Part 1 referred to in this Contract SCOTTISH MINISTERS REQUIREMENTS SCHEDULE 5 PART 1 QUALITY MANAGEMENT SYSTEM CONTENTS Page No 1 GENERAL REQUIREMENTS 1 1.1 Requirements 1
Polymer Technologies and Science (PTS)
K 066/479 Master Curriculum Polymer Technologies and Science (PTS) (in English) 1_MS_PolymerTechnologiesAndScience_Curr Seite 1 von 9 Inkrafttreten: 1.10.2013 Table of Contents 1 Qualification Profile...3
general VoIP-settings
// Handset assignment (only for DECT PBX) I_SIP_ACCOUNT_MT_RCV_1 1, 3, 7, 15, 31, 63 Settings --> Telephony --> Number Assignment --> Which handsets are assigned to Account1 for incoming calls I_SIP_ACCOUNT_MT_SND_1
Partner Portal User Procedures
Partner Portal User Procedures The help topics below are included in this document: Overview Self-Registration (First Time Users) Enrolling in an Application Accessing an Application (Once Enrolled) Signing
Cloud Performance Group 1. Cloud@Night Event. 14. Januar 2016 / Matthias Gessenay ([email protected])
1 Cloud@Night Event 14. Januar 2016 / Matthias Gessenay ([email protected]) 2 Agenda SharePoint ABC Project Server ABC What s new in O365 4 SharePoint 2016 ABC A Access App-Support
Polymer Technologies and Science (PTS)
K 066/479 Master Curriculum Polymer Technologies and Science (PTS) (in English) 2_MS_PolymerTechnologiesAndScience_Curr Seite 1 von 10 Inkrafttreten: 1.10.2014 Table of Contents 1 Qualification Profile...3
Zentrale Prüfungen 2009
Zentrale Prüfungen 2009 Englisch, Gymnasium Erster Prüfungsteil: Hörverstehen 1 Selektives Verstehen Flying to London You are going to hear a text about James and Linda Smith, who are at Sydney International
SQAR Section 2. Inhaltsverzeichnis/Table of Contents
PAGE: 2 Inhaltsverzeichnis/Table of Contents Inhalt Contents Seite/Page 1 Zweck Scope 3 2 Anwendungsbereich Applicability 3 3 Begriffe und Abkürzungen Terms and Abbreviation 3 4 Beschreibung der Anforderungen
Continental Automotive Trade Terms Doc. Type TST CA-DAP & CA-DDP Doc. Num. N 098 00.02. For Suppliers Date: 2014-09-30 Page 1 of 7 CONTENTS
For Suppliers Date: 2014-09-30 Page 1 of 7 CONTENTS Changes... 2 Previous Editions... 2 1 SCOPE... 2 2 REFERENCES... 2 3 CONTINENTAL DELIVERY TRADE TERMS CA-DAP & CA-DDP... 3 3.1 Delivery Trade Term CA-DAP...
How-To-Do. Firmware Update Speed7 and project backup on the MMC card
How-To-Do Firmware Update Speed7 and project backup on the MMC card Table of Contents 1 Generally... 2 1.1 Information... 2 1.2 Reference... 2 2 Step by step procedure... 3 2.1 Save Project from CPU to
Android Labor #7 ἦ καὶ κυανέῃσιν ἐπ' ὀφρύσι νεῦσε Κρονίων ἀµβρόσιαι δ' ἄρα χαῖται ἐπερρώσαντο ἄνακτος κρατὸς ἀπ' ἀθανάτοιο µέγαν δ' ἐλέλιξεν Ὄλυµπον.
Platzhalter für Bild, Bild auf Titelfolie hinter das Logo einsetzen Android Labor #7 ἦ καὶ κυανέῃσιν ἐπ' ὀφρύσι νεῦσε Κρονίων ἀµβρόσιαι δ' ἄρα χαῖται ἐπερρώσαντο ἄνακτος κρατὸς ἀπ' ἀθανάτοιο µέγαν δ' ἐλέλιξεν
Dokument Nr. 521.dw Ausgabe Februar 2013, Rev. 01. . Seite 1 von 11. 521d Seite 1 von 11
Eidgenössisches Departement für Wirtschaft, Bildung und Forschung WBF Staatssekretariat für Wirtschaft SECO Schweizerische Akkreditierungsstelle SAS Checkliste für die harmonisierte Umsetzung der Anforderungen
I-Q SCHACHT & KOLLEGEN QUALITÄTSKONSTRUKTION GMBH ISO 26262:2011. Liste der Work Products aus der Norm
I-Q SCHACHT & KOLLEGEN QUALITÄTSKONSTRUKTION GMBH ISO 26262:2011 Liste der Work Products aus der Norm 1. Work Products in der ISO 26262:2011 1.1 Liste ISO-26262:2011, part 1 - Vocabulary no relevant work
Spezifikation für Freigabe / specification for release
Kunde / customer : Artikelnummer / part number : Spezifikation für Freigabe / specification for release 7499611421 Bezeichnung : LAN-Übertrager WE-RJ45LAN 10/100/1000/10G BaseT description : LAN-Transformer
Leitfaden für die Antragstellung zur Förderung einer nationalen Biomaterialbankeninitiative
Seite 1 von 8 Leitfaden für die Antragstellung zur Förderung einer nationalen Biomaterialbankeninitiative Anträge zu Biomaterialbanken sind entsprechend den Vorgaben dieses Leitfadens zu erstellen (DIN
Managing Process Architecture and Requirements in a CMMI based SPI project 1
Managing Process Architecture and Requirements in a CMMI based SPI project 1 Author: Filippo Vitiello Abstract When developing or changing a process, and all its related assets, often the process engineers
Application Note SORCUS Support System. Using the SORCUS Support System (Customers)
AN-0137 Application Note SORCUS Support System Using the SORCUS Support System (Customers) This application note gives a short introduction how to use the SORCUS Support System. 1. Purpose To be able to
Pruefergebnisse finden Sie auf den folgenden Seiten Refer to the following page(s). kontrolliert/ checked by:
t,. TUVRheinland Produktsicherheit und -qualitat Product Safety and Quality Priifbericht - Nr.: 1603010663-01 Seite I von 3 Page 1 of 3 Auftraggeber: CLARO FAIR TRADE AG Client: Byfangstrasse 19 CH-2552
External Quality, Environment, Health & Safety Management Manual with Integrated Welding Engineering Manual
conferdo GmbH & Co. KG External Quality, Environment, Health & Safety Management Manual with Integrated Welding Engineering Manual of the company conferdo GmbH & Co. KG STAHLBAU OHNE GRENZEN STEELWORK
Anwendung von Polyspace im Software Entwicklungsprozess nach IEC 60880. München, 19.05.2011, Dr.-Ing. Jörg Barrho
Anwendung von Polyspace im Software Entwicklungsprozess nach IEC 60880 München, 19.05.2011, Dr.-Ing. Jörg Barrho Agenda 01 Tognum and MTU Friedrichshafen 02 Background and project 03 Overview IEC 60880
Setting up VPN Tracker with Nortel VPN Routers
Setting up VPN Tracker with Nortel VPN Routers 2009 DeTeWe Communications GmbH! Seite 1 von 13 Configuring the Nortel VPN Router (Contivity)! 3 Configuring the global IPSec settings! 3 Authentication!
CALL FOR ENTRIES. We are looking forward to your submission and to an exciting and inspiring 9th festival edition of this human world.
CALL FOR ENTRIES We are looking forward to your submission and to an exciting and inspiring 9th festival edition of this human world. Competition Sections this human world ENTRY FORM 2016 Competition Programme
Visocall IP PBX Connection
Visocall IP PBX Connection Specification Authors: V 2.1 Buchmüller Seite 1 von 8 Table of Contents DOCUMENT STATUS... 3 1 INTRODUCTION... 4 2 FUNCTIONALITY... 4 2.1 PAT TELEPHONE FUNCTION... 4 2.2 EVENT
List of approvals of SWG GmbH and GVG mbh
Qualitätsprüfung Produkte Technical Document QP-TQ-TD-01EN Titel: Title: List of approvals of SWG GmbH and GVG mbh Ersetzt: Dokument-Nr.: QP-TQ-TD-01EN Rev.: C vom: 26.01.2015 Replaces: Document-No.: (engl.version)
MAKING AN EVOLUTIONARY TREE
Student manual MAKING AN EVOLUTIONARY TREE THEORY The relationship between different species can be derived from different information sources. The connection between species may turn out by similarities
Das Amt der Europäischen Union für die Eintragung von Marken und Geschmacksmustern. 001843077 Art der Marke: Bildmarke 18/10/2001
OAMI-ONLINE - CTM-ONLINE - Ausführliche E... http://oami.europa.eu/ctmonline/requestma... HABM Das Amt der Europäischen Union für die Eintragung von Marken und Geschmacksmustern Sie befinden sich hier:
Quality Assurance Agreement (QAA)
Quality Assurance Agreement (QAA) History and Release Notes: Version Date Acronym 0.1 15.04.2010 AB Draft 0.2 10.06.2010 AB Revision in the core team 1.0 28.03.2011 AB,RK, RH Release Status of revision;
QCF Qualifications in Languages. German. Level 1
QCF Qualifications in Languages German For teaching from September 2012 SPOKEN GERMAN: Communicating Personal Information Assessment Criteria 1.1 and 1.2 Task: Meeting New People CC- BY-SA 2007 Miraceti
I Textarbeit. Text 1. I never leave my horse
BEJ Musterprüfung Englisch (11020) 1 I Textarbeit Text 1 I never leave my horse 1 5 10 15 20 Police officers in Ireland don t carry guns. But they often ride through Dublin on horses. Julie Folan is a
Better processes by sprint: Agile process improvement. Timo Karasch, Method Park
Better processes by sprint: Agile process improvement Timo Karasch, Method Park Seite 1 / 14 Abstract The conventional process improvement is more and more unable to cope with its excessive objectives
This translation is provided for convenience only; in case of discrepancy, the German version shall prevail.
This translation is provided for convenience only; in case of discrepancy, the German version shall prevail. Supervision Agreement in the context of a doctoral project at the Technische Universität München
Technik vs. Lean: Widerspruch oder Ergänzung
LOGISTIK HEUTE Forum auf der CeMAT 2008 Hannover, 28. Mai 2008 Technik vs. Lean: Widerspruch oder Ergänzung Vortrag im Rahmen des Forums: Warehousing Prozesse und Technologien mit Lean Production-Konzepten
Guideline. Date: 12.06.2013
Guideline Detailed definition and clarification of open points in the aerodynamic requirements of TSI HS RST 2008 and TSI CR LOC&PAS 2011 in 4.2.6.2.1 passengers on platform, 4.2.6.2.2 workers at the track
Certificate of Compliance
No. 0V151007.CFMTW07 Brushless Dc motor FL42BLS01(CE), FL16, FL20, FL22, FL24, FL28, FL32, FL33, FL36, FL42, FL45 EN 61000-6-3:2007+A1:2011, EN 61000-6-1:2007, EN 55014-2:1997+A1:2001+A2:2008, No. 0V151007.CFMTW08
Agentur für Arbeit Stade Berufsberatung. Regina Korte June 2014. Counselling Services. an Instrument for Fighting Youth. Umemployment?
Agentur für Arbeit Stade Berufsberatung Regina Korte June 2014 Counselling Services an Instrument for Fighting Youth Umemployment? This workshop aims to $ an exchange about counselling services in the
Save offset to Encoder from PLC
Application Note Save offset to Encoder from PLC Save offset position (zero position) to multiturn encoder with FPC (Festo Parameter Channel). CMMP-AS-M0/M3 100064 Title... Save offset to Encoder from
Synopse: EU-GMP- Leitfaden Annex 11 Computerised Systems
Synopse: EU-GMP- Leitfaden Annex 11 Computerised Systems Am 3. Januar 2011 wurde die neue Fassung des Annex 11 Computerised Systems durch die Europäische Kommission freigegeben. Der Annex wurde überarbeitet,
Management in Polymer Technologies (MPT)
K 066/480 Master Curriculum Management in Polymer Technologies (MPT) (in English) 4_MS_ManagementPolymerTechnologies_Curr Seite 1 von 10 Inkrafttreten: 1. 10. 2013 Table of Contents 1 Qualification Profile...3
Eurohansia. working in partnership
Eurohansia working in partnership Catalogue Corporate items 2010 Herzliche Grüße! Arbeiten in Partnerschaft. Greetings! Working in partnership. Mehr als eine Aussage, ist diese die Verpflichtung von EUROHANSIA
CLIMATIC Test Report
CLIMATIC Test Report ONLY FOR THE INTERNAL APPLICATION No. 200011.001internal for KFM 21_e Test Laboratory: Applicant: Purpose of Testing: Kontron Elektronik GmbH Oskar von Miller Straße 1 85386 Eching
Liste der verwendeten Prüfmittel List of used test equipment
rodukte roducts rüfbericht-nr.: 21204831_001 Seite 2 von 12 age 2 of 12 Liste der verwendeten rüfmittel List of used test equipment rüfmittel Test equipment rüfmittel-nr. / ID-Nr. Equipment No. / ID-No.
Sommer Informatik GmbH Sepp-Heindl-Str. 5 83026 Rosenheim Tel: 08031-24881 Fax: 08031-24882 [email protected] www.sommer-informatik.
Sommer Informatik GmbH Sepp-Heindl-Str. 5 83026 Rosenheim Tel: 08031-24881 Fax: 08031-24882 [email protected] www.sommer-informatik.de Question: How is it possible to add our specific data into
CSP Cardan Service Production CSW Cardan Service Welder
CSP Cardan Service Production CSW Cardan Service Welder The mobility package by WiCHMANN GmbH Seite 1 von 5 Description of the CSP and CSW equipment The new CSP and CSW constitute our top of the line prop
Kommunikationszubehör für USV PROTECT C. / C. R / 1. / 1.M Communication accessory for UPS PROTECT C. / C. R / 1. / 1.M
Kommunikationszubehör für USV PROTECT C. / C. R /. /.M Communication accessory for UPS PROTECT C. / C. R /. /.M Einsteckkarte pot.-freie Kontakte Slotcard potential - free contacts AEG Power Solutions
Palletways Deutschland GmbH. Pressestimmen August 2012. Grayling Deutschland GmbH
Palletways Deutschland GmbH Pressestimmen Grayling Deutschland GmbH Seite 2 von 29, Stand: 16.08.12 Press Review Palletways: Media Date Circulation/ Visits DVZ.de 06.08.2012 172.925 finanzen100.de 06.08.2012
Lean Management Institut
Lean Management Institut Professional partner for Lean Management LEAN MA NAGEMENT INSTITUT SCHWEIZ Lean Management Institut Challange: The Lean Management Institut (LMI) is the forum for Lean Management
Management in Polymer Technologies (MPT)
K 066/480 Master Curriculum Management in Polymer (MPT) (in English) 5_MS_ManagemantPolymerTechnologie_Curr Seite 1 von 11 Inkrafttreten: 1. 10. 2014 Table of Contents 1 Qualification Profile...3 2 Admissions...4
Commissioning IDENTControl Compact IC-KP2-2HB17-2V1D Profinet Protocol with a Siemens S7 PLC
Commissioning IDENTControl Compact IC-KP2-2HB17-2V1D Profinet Protocol with a Siemens S7 PLC Seite 1 von 19 Index of contents 1. Adjustment of communication parameter with web interface...3 2. Installation
So ware Zusammenfassung Details docusnap.intern
docusnap.intern Datum Autor Seitenanzahl 08.10.2012 Docusnap 16 Domäne: docusnap.intern Hersteller: - Kein Hersteller angegeben - So warename: StorageIM_Community_1_1_0 Version 1.1.0.0 Hersteller: administrator
TECHNICAL DATASHEET Incremental Encoder RI 58-H
Through hollow shaft High accuracy by means of integrated flexible coupling Safe shaft mounting Applications: textile machines, motors, drives, copiers NUMBER OF PULSES 1 / 2 / 3 / 4 / 5 / 10 / 15 / 20
Prolific USB-Serial Driver 0.4.1: http://www.flytec.ch/en/usb-serial-driver.html
System requirements Mac OS X 10.6.7 or higher CrossOver Standard 10.0.1 or higher (tested on CrossOver Professional) http://www.codeweavers.com/products/crossover/stdvspro/ FlyChart 4.52(62) or higher:
Characterization and Simulation of Processes
Characterization and Simulation of Processes * M. Engelhardt 1, H. von Senden genannt Haverkamp 1, Y.Kiliclar 2, M. Bormann 1, F.-W. Bach 1, S. Reese 2 1 Institute of Materials Science, Leibniz University
Quality Management Manual
Seite 1 von 21 Quality Management Manual SECTOR Cert Gesellschaft für Zertifizierung mbh This document is a copy of the approved original document and applies within the frame of a controlled distribution
Management in Polymer Technologies (MPT)
K 066/480 Master Curriculum Management in Polymer (MPT) (in English) 6_MS_ManagPolymerTech_Curr Seite 1 von 12 Inkrafttreten: 1. 10. 2015 Table of Contents 1 Qualification Profile...3 2 Admissions...4
Catalog No. Description / System Revision Status
Certificate No.: 968/EZ 164.10/09 Catalog No. Description / System Revision Status 1753-L28BBBM GuardPLC 1600 Modbus 20DI, 8DO 00 1753-L28BBBP GuardPLC 1600 Profibus 20DI, 8DO 00 1753-L32BBBM-8A GuardPLC
Training Program 2016. Hydraulic Valves, Controls and Drive Controlled Pumps in Typical Applications
Training Program 2016 Hydraulic Valves, Controls and Drive Controlled Pumps in Typical Applications General The Hydraulic Controls Division Europe is a worldwide leading manufacturer of innovative and
APPLICATION FOR ADMISSION For further information please visit our website www.hs-kl.de/fachbereiche/bw/studiengaenge/master-studiengaenge
APPLICATION FOR ADMISSION For further information please visit our website www.hs-kl.de/fachbereiche/bw/studiengaenge/master-studiengaenge Information Management Form for admission to the post-degree course
(date will be added upon official issue)
Technical University Dresden Faculty of Science Regulation Concerning the Determination of Eligibility in the Master Study Program Psychology: Human Performance in Socio-Technical Systems (HPSTS) (Eignungsfeststellungsordnung)
Materialien zu unseren Lehrwerken
EXIT TEST Please use the answer sheet provided. Listening Language 1 [SB B1, Track 43] Listen to the meeting about the trade fair. Are the sentences true or false? 1. The reason for the meeting is to prepare