CF to Serial Adapter Quick Installation Guide

Transcription

1 CF to Serial Adapter Quick Installation Guide Features and Benefits 16-bit CompactFlash interface Compatible with 16-bit PCMCIA Card (via a CF-to-PCMCIA adapter) Supports RS232E serial port specification Supports data rate up to 115,200 bps Works with modems, PDAs, Pocket PCs and other serial devices System Requirements For Desktop or Notebook PC with a PCMCIA slot: Windows 98/98SE/ME/2000/XP/Server 2003 CF-to-PCMCIA adapter (not included) CD-ROM (for driver installation) A 1

2 For Pocket PC: Windows CE 3.0 or later Pocket PC 2000 or later Built-in CF slot Package Contents (1) CF to Serial adapter (1) CF to Serial cable (1) Driver CD This quick installation guide 2

3 Layout CF to Serial flat connector CF to Serial Cable CF to Serial Adapter 9 Pin Connector Figure 1. CF to Serial Adapter layout Note: When connecting the CF to Serial Cable to the CF to Serial Adapter, make sure the triangle on the CF to Serial flat connector is pointing up. 3

4 Software Installation Windows Driver Installation Windows 98: The CF to Serial Adapter must be inserted into the computer before booting up Windows 98 otherwise it will not be detected by the system. 1. Insert the CF to Serial Adapter into the CF-to- PCMCIA adapter (not included), then insert the unit into the system's PCMCIA slot. Boot up to Windows. 2. At the Add New Hardware Wizard, click Next. 3. Select Search for the best driver for your device. (Recommended) and click Next. 4. Insert the driver CD, check CD-ROM drive, uncheck the other boxes, then click Next. 5. Click Next, at the Insert Disk box click OK. Insert your Windows 98 Installation CD, click OK, then click Finish to complete installation. Windows 98SE: 1. Boot up to Windows. Insert the CF to Serial Adapter into the CF-to-PCMCIA adapter (not included), then insert the unit into the system's PCMCIA slot. 4

5 2. At the Add New Hardware Wizard, click Next. 3. Select Search for the best driver for your device. (Recommended) and click Next. 4. Insert the driver CD, check CD-ROM drive, uncheck the other boxes, then click Next. 5. Click Next, at the Insert Disk box click OK. Insert your Windows 98 Installation CD, then click OK. 6. Click Finish to complete the installation. Windows ME: 1. Boot up to Windows. Insert the CF to Serial Adapter into the CF-to-PCMCIA adapter (not included), then insert the unit into the system's PCMCIA slot. 2. Insert the driver CD. At the Add New Hardware Wizard, click Automatic Search for a better driver, then click Next. 3. Click Finish. 4. Restart Windows to complete the installation. 5

6 Windows 2000: 1. Boot up to Windows. Insert the CF to Serial Adapter into the CF-to-PCMCIA adapter (not included), then insert the unit into the system's PCMCIA slot. 2. At the Found New Hardware Wizard, click Next. 3. Select Search for a suitable driver for my device (Recommended) and click Next. 4. Insert the driver CD, check CD-ROM drives, uncheck the other boxes, then click Next. 5. Click Next and Finish. 6. Restart Windows to complete the installation. Windows XP/Server 2003: 1. Boot up to Windows. Insert the CF to Serial Adapter into the CF-to-PCMCIA adapter (not included), then insert the unit into the system's PCMCIA slot. 2. Insert the driver CD. At the Found New Hardware Wizard, select Install the software automatically (Recommended), then click Next. 6

7 3. Click Continue anyway. Our driver has been thoroughly tested in Windows for stability and compatibility. 4. Click Finish. 5. Restart Windows to complete the installation. Verify Windows Installation 1. Check Device Manager to verify successful driver installation. Windows 98/98SE/ME: From the main desktop, right click My Computer, then click Properties. Click Device Manager tab. Windows 2000/XP/Server 2003: Right click My Computer, then click Manage. Click Device Manager. 2. Double click Ports (COM & LPT) option and Billionton Compact Flash Serial... should be displayed. Windows CE /Pocket PC Installation No driver installation is needed for Windows CE or Pocket PC operating systems. The driver installs automatically when the CF to Serial Adapter is plugged into the CF slot of the Pocket PC. 7

8 Technical Support QUESTIONS? SIIG s Online Support has the answers! Simply visit our web site at and click on Support. Our online support database is updated daily with new drivers and solutions. The answers to your problems could be just a few clicks away. PRODUCT NAME CF to Serial Adapter FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE SIIG, Inc Stewart Ave. Fremont, CA CF to Serial Adapter is a trademark of SIIG, Inc. All other names used in this publication are for identification only and may be trademarks of their respective companies. April, 2004 Copyright 2004 by SIIG, Inc.