Travaux publics et Services gouvernementaux Canada. Title - Sujet CABLE ASSEMBLY,FIBER OPTIC,BRANCHED

Transcription

1 Public Works and Government Services Canada RETURN BIDS TO: RETOURNER LES SOUMISSIONS À: Bid Receiving - PWGSC / Réception des soumissions - TPSGC 11 Laurier St. / 11, rue Laurier Place du Portage, Phase III Core 0B2 / Noyau 0B2 Gatineau, Québec K1A 0S5 Bid Fax: (819) SOLICITATION AMENDMENT MODIFICATION DE L'INVITATION The referenced document is hereby revised; unless otherwise indicated, all other terms and conditions of the Solicitation remain the same. Ce document est par la présente révisé; sauf indication contraire, les modalités de l'invitation demeurent les mêmes. Travaux publics et Services gouvernementaux Canada Title - Sujet CABLE ASSEMBLY,FIBER OPTIC,BRANCHED Solicitation No. - N de l'invitation W /A Client Reference No. - N de référence du client W GETS Reference No. - N de référence de SEAG PW-$$HN File No. - N de dossier hn313.w Part - Partie 1 of - de 2 See Part 2 for Clauses and Conditions Voir Partie 2 pour Clauses et Conditions CCC No./N CCC - FMS No./N VME Solicitation Closes - L'invitation prend fin at - à 02:00 PM on - le F.O.B. - F.A.B. Plant-Usine: Destination: Other-Autre: Address Enquiries to: - Adresser toutes questions à: Kelly, Ruth Telephone No. - N de téléphone (819) ( ) Destination - of Goods, Services, and Construction: Destination - des biens, services et construction: Amendment No. - N modif. 002 Date Time Zone Fuseau horaire Eastern Daylight Saving Time EDT Buyer Id - Id de l'acheteur hn313 FAX No. - N de FAX ( ) - Comments - Commentaires Vendor/Firm Name and Address Raison sociale et adresse du fournisseur/de l'entrepreneur Instructions: See Herein Instructions: Voir aux présentes Delivery Required - Livraison exigée Delivery Offered - Livraison proposée Vendor/Firm Name and Address Raison sociale et adresse du fournisseur/de l'entrepreneur Issuing Office - Bureau de distribution Electrical & Electronics Products Division 11 Laurier St./11, rue Laurier 7B3, Place du Portage, Phase III Gatineau, Québec K1A 0S5 Telephone No. - N de téléphone Facsimile No. - N de télécopieur Name and title of person authorized to sign on behalf of Vendor/Firm (type or print) Nom et titre de la personne autorisée à signer au nom du fournisseur/ de l'entrepreneur (taper ou écrire en caractères d'imprimerie) Signature Date Canada Page 1 of - de 1

2 W hn313w This page has been intentionally left blank Part - Partie 2 of - de 2 / Page 1 of - de 1

3 Amendment No. 002 is raised to provide answers to the following questions and amend the solicitation closing date. DELETE: INSERT: Item 1 Q: Do the connectors need to be the military version with a zinc nickel plating? Item 2 Q: Will this 100m assembly need any reel? None specified A: The cable need reel RFO300 Q: Do the connectors need to be the military version with a zinc nickel plating? Item 3 Q: For the ST connectors, do they need to be MIL-ST or is a ruggedized ST acceptable? A: ruggedized acceptable Item 4 Q: Description calls out a 3mm LC that is attached to the 2mm cable by building up the cable diameter with a heat shrink jacket diameter augmentation. Can we just use a 2mm LC? We can do it either way, but would eliminate the heat shrink augmentation step. A: The heat shrink will protect the fiber from getting damage and more strand to the open cable portion Q: Not sure what the comment Overall diameter: meters maximum of standard range. Please explain. A: removed comment

4 Q: Is this a multi-mode or single mode fiber? A: This is a multi-mode fiber cable. Item 5 Q: We are not sure of the configuration of this assembly. The cable specified is a 4 channel, which would indicate that 3 ends of cable would be going into the 12 channel connector. If that is the case, what does the 12 channel connector back end look like? Is a drawing or picture available? Picture of item 5 1X 12 fiber connector and 3X 4 fiber connectors Q: Please provide end use for these items; Military Ground Systems, Shipboard, Industrial, Mining, Airframe, Oil & Gas, Alternative Energy, or Broadcast? A: Military Ground communication system.

5 Specifications TFOCA Plug 4CH MIL-DTL FIBER OPTIC CONNECTOR ASSEMBLIES TEST Method Value Environmental Performance Test Method Details Temperature Cycling DOD-STD-1678, Method 4020 / MIL-STD-202, Method cycles, -46 C/+71 C Storage Temperature MIL-STD-810F, Method 501.4, Procedure I 168 hours, +85 C 24 hours, -55 C Humidity DOD-STD-1678, Method 4030 MIL-STD-202F, Method 106E 10 cycles Water Pressure MIL-STD-810, Method 512.4, Procedure 1 1m for 48 hours Dust MIL-STD-810, Method 510.4, Procedure 1 6 hours +23 C 6 hours +65 C Corrosion Resistance MIL-STD-1344A, Method 1001, Test Condition A 96 hours Cable Retention MIL-STD-1344A, Method minute, 182 Kg Cable Sealing Flexing MIL-STD-1344A, Method 2017, Test Procedure I 200 cycles Crush Resistance MIL-STD-1344A, Method N Impact EIA Method B (severe) 40 drops: 2.4m, 1.8m, 1.2m, 0.6m Maintenance Ageing MIL-STD-1344A, Method cycles Vibration DEF STAN 00-35, Part 3, Test M1 6 hours. 0.1g²/Hz 20 Hz - 2 khz Mechanical Shock EIA , Test Condition A. MIL-STD-1344A, Method 2004, Test Condition A Mating Durability EN cycles Attenuation 0.5dB Max. 18 shocks, 50g, half-sine, 11 millisecond duration ***** MIL-PRF-29504/4 & /5 Revision D specification for fiber optic termini. Hermaphroditic Design for Versatility - Enables multiple TFOCA plug assemblies to be concatenated. Removable End Cap - Allows for easy field maintenance and cleaning. 4-Channel Connector Design - Two fold improvement over TFOCA with better optical performance. Improved Cable Retention Strength - Designed to meet 400lb. pull strength while protecting fibers from stress. Zn-Ni Plating - Provides substantial longevity to corrosive environments. Meets new mandate set by Environmental Protection Agency for elimination of heavy metal plating. Ref. dtl83526.pdf