Clamcleat Product Line

Transcription

1 0-0 lamcleat Product Line

2 omplementary ranges to satisfy all needs. leats & hocks The lamcleat principle deceptively simple ridged 'V' groove holds ropes firmly, yet is devoid of any moving parts to break or seize. It allows the iediate release of the rope by a short upward and backward pull. Marine grade nylon cleats offer very good value for money, for both production builder and sailor alike. They are ideal for most applications where high loads or rope surges are not likely to be encountered. Nylon cleats are corrosion resistant and will last for many years outdoors. luminum cleats are available in our standard silver or the new hard anodized finish. They are unaffected by the heat generated by a rope surging back through a cleat as well as being suitable for sub-zero temperatures. Hard anodizing has a high-tech and fashionable appearance as well as offering superior resistance to sea water corrosion. Our research into cleat materials over the years has shown aluminum to be far better for high performance cleats than any polymer, irrespective of any fiber reinforcement or additive. These factors make aluminum cleats the best choice for demanding applications. colors are shown in the photographs but special colors are available to order. For example, white 0000 are supplied for window blinds. Numbers beginning with 00 are Sea-Dog part numbers and should be used when ordering. Numbers beginning with L are lamcleat numbers given for reference and marked on the bottom of the cleat. See Numerical Index at the end of hapter. Most cleats are provided with countersunk fixing holes. Flathead screws or bolts of the recoended size should be used; bolts being preferred. If using rivets with a powered fixing gun, make sure the pressure is not set too high. Fastenings must be entered straight so that the heads do not protrude to snag the rope. Several of the cleats have been designed with a groove in the base enabling them to be fitted to both flat and curved surfaces. lamcleat rope cleats are not suitable for metal ropes. L0 L L7 L75 L7W L80 LN L75N Micros & Mini leats Mini L0 (Nylon) Racing Mini L LN (luminum) Micros L7 L7W (Nylon) Racing Micros L75 L75N (luminum) Gauge /6 7 /6 5/8 M M. 6 7 /8 7 /6 5/ /6-5 / 5 /6 5/6 / # No 0. - /6-5 / 5 /6 5/6 / # No L8 Tapered Pad for L0 & L L80 (Polypropylene) / /6 M. 0. The N suffix indicates an extra superior Hard nodized finish. Tapered Pad for L7 & L75 L8 (Polypropylene) /6 / # No 0.5 L Fine Line leats Gauge L L58 L58N L5N L5 Fine Line (Starboard) L (Nylon) Fine Line (Port) L (Nylon) Racing Fine Line (Starboard) L58 L58N (luminum) Racing Fine Line (Port) L5 L5N (luminum) /6- / M / 5 /6 /6 70 M / 5 /6 / /6- /6 70 M. / 5 /6 / M. / 5 /6 / uto-release leat Gauge L57 uto-release Racing Mini L57 (luminum + cetal) The cleat flips up to release the rope when a set load is exceeded. The L57 is easily re-set or adjusted for different release loads, even out on the water. - 6 /6- / /8 / 7/8..

3 leats & hocks lamcleat rope cleats Roller leats Gauge Roller Fairlead White Junior L0W/S (Nylon) White Junior with Roller L0W/S (Nylon) Racing Junior Mk with Roller L0 L0N (luminum) Roller Fairlead Mk Racing Junior L6 L6N (luminum) Trapeze and Vang leat L5 L5N (luminum) / / 5 /8 /6 M n/a M. 7 / 5 /8 /6 0.6 n/a / 5 /8 /6 # No / 5 /8 /6 # No / / /6 6.6 L0W/S L0W/S L0 L0N L6 L6 L6N L5 L0 L5N L5 The L5/L5N are designed for trapeze adjustment and vang tensioning. The L0/L0N are ideal for through-deck or mast applications. Q-Lok Gauge L500 Q-Lok L500 (Stainless steel) /6 / 5 0. Quickly adjust ropes to a variety of fixed positions Splice Sew Knot ub & Sail Line leats ub leat L LW (Nylon) Racing Sail Line leat (Port) L LN (luminum) Racing Sail Line leat (Starboard) L7 L7N (luminum) L Omega leat Omega leat L55 L55N(luminum) Lift rope for cleating The L can be fitted either way up. Minimum movement cleats the rope. Gauge /8 /8 7 /6 M M. 6 / 5 /6 / M. 6 / 5 /6 /6 0.6 Rope cleated L & L7 Gauge 6 7 M /6 /6 /6 The L and L7 have a smooth low profile for snag free areas L L7N LN L55N L LW L7 The N suffix indicates an extra superior Hard nodized finish. Pull rope back to release L55 L55 / L55N Rope is free to move Nesting arrangements and use as a downhaul.

4 leats & hocks L70 L70N L78 L78N L6 L6W L68N L8 L68 L77 L77N leats with integral fairleads for ropes to 5 / Micros L6 L6W (Nylon) Racing Micros L68 L68N (luminum) Racing Micros with ecket L70 L70N (luminum Racing Micros Side entry (Starboard) with ecket L77 L77N (luminum) Racing Micros Side entry (Port) with ecket L Gauge - /6-5 / / 5/6 / - # # No No 7 /6 / /6-5 / / 5/6 / - /6-5 / / 5/6 / # No L78N (luminum) /6-5 / / 5/6 /6 # No 0. Tapered Pad for all Micros cleats L8 (Polypropylene) Rigging for L70,L70N, L77, L77N,L78 and L78N. - /6-5 / / 5/6 /6 # No Rivetting the L Mk or L6. Rivet gun spacers are available free of charge. Special long mandrel alloy rivets are also available for L Mk. LMkN L7 L7W LMk LMkN/S LMk/S The N suffix indicates an extra superior Hard nodized finish. leats with integral fairleads for ropes to / Racing Junior Mk LMk LMk N (luminum) Racing Junior Mk with ecket LMk/S LMkN/S(luminum) Mk Nylon Junior L7 L7W Gauge /8 /6 5/ /8 /6 5/ /8 /6 5/8 M M M K leats & ccessories L85, L87 & L8 Gauge Gauge L85 L8 L8K L80K L87 L85K Keeper for 00, 006 & 007 L85 (cetal) age for 00 & 006 requires L85 L87 (Nylon & Stainless steel) Tapered Pad for 00, 006, 007, 007 & 008 L8 (Polypropylene) K leat LMk X L85K L85KN K leat LMk L80K L80KN K leat LMk L8K L8KN M 5 /6 M M # M M...8 No No ages L86 and L87 with wear resistant stainless steel allow easy cleating at extreme angles. L80K 7 /6 Hole centers L85K 66 5 /8 Hole centers same as LMk Rope runs free Keeper is closed to stop rope going into cleat teeth. Pull rope back and down to cleat Keeper opens to allow rope into teeth. Rope gripped Keeper holds rope in cleat. Lift up to release Keeper opens to allow rope out of teeth. Rope runs free again.

5 ccessories L8, L86 & L88 Keeper for 0000, 00, 005, 007, 008, 0060 & 0065 L8 (cetal) age for 0000, 00, 005, 0060 & 0065 requires L8 L86 (Nylon & Stainless steel) Tapered Padfor 0000, 00, 005, 007, 008, 0060, 0065, &00705 L88 (Polypropylene) K leat LMk+L8+L86 L8K L8KN /6.8 /6.8 /6 #.8 No M # # Gauge.8 No.8 No.8 No Gauge.8 No No leats & hocks lamcleat rope cleats L8 L86 L88 L8K Rope runs free - Keeper keeps rope out of teeth Pull rope down to cleat. Sloping rear automatically guides rope into teeth Rope held securely, even if cleat is mounted under a surface. Tapered Pad allows correct rope/cleating alignment. The Keeper,L8, holds rope in teeth under no load or when mounted upside down. More details on using these accessories can be found on our website. ackplate provides under deck support and is supplied with every tapered pad. leats with integral fairleads for ropes to / Gauge L0 Junior M. 7 L0 (Nylon) / 5 /8 /6 0.6 Racing Junior Mk LMk LMkN (luminum) / 5 /8 /6 # No. oom leat L L70N (luminum} / 5 /8 /6 # No. Racing Junior with ecket L L70N (luminum) / 5 /8 /6 # No. L70 The L70 has a specially curved base for use on tubes. L70 L70 LMkN L70N LMk L70 L70N Side entry leats Mk for ropes to / Side entry (Starboard) L7Mk L7MkN (luminum) Side entry (Port) L8Mk L8MkN (luminum) Gauge / 5 /8 / / 5 /8 /6 # #.8 No No. L7Mk L8Mk L7MkN L8MkN Using Side Entry cleats correctly Side entry leats Mk for ropes to / Side entry (Starboard) L7Mk L7MkN (luminum) Side entry (Port) L8Mk L8MkN (luminum) Gauge /8 /6 / /8 /6 /6 M M L7MkN L8Mk L8MkN L7Mk Using Side Entry cleats correctly

6 L L5N L0 L LW L0N LW leats & hocks leats for Rigging on a Rope Loop leat L LW (Nylon) Racing JuniorMk with Roller L0 L0N (luminum) Fender/Large Loop leat L LW (Nylon) /6 /6 / 7/ / 5 /8 / /- / /6 5/6.6 Trapeze and Vang leat L L5N (luminum) /6 / / /6.6 5 obra leat L L6N (luminum) /6- / / /.7 Jiffy Tie L806 (Polypropylene) : L : L : /6 0. n/a L5 L6 L5 : L6 : L6N L806 L5 can hold heavy banners and flags. N NER L5 : The N suffix indicates an extra superior Hard nodized finish. L66W L76 L7W L76W L66 L60 L60W L7 Line-Lok leats for Rigging on a Rope Line-Lok L60 L60W (Nylon) Mini Line-Lok L66 L66W (Nylon) Large Line-Lok L7 L7W (Nylon) Medium Line-Lok L76 L76W (Nylon) /6- /6 / /8 - /6- / /6 7 /6 / 67 5 /8 7/ /8 5/ Easy to rig Push up to tension and secure Pull lines apart to release Easy to use, even when wearing thick mitts or gloves. These Line Tensioners lock lines securely and are easy to release..grips the line to resist being shaken loose - even in extreme conditions..out performs all existing plastic guy runners..see

7 ero leats L86 ero base + LMk Racing Junior L86- (Nylon & luminum) ero base + LMkN Hard nodized Racing Junior L86-N (Nylon & luminum) ero base + L7Mk Nylon Junior L86-7 (Nylon) /6- / - 6 /6- / - 6 /6- / /8 5/ /8 5/ /8 5/8 leats & hocks lamcleat rope cleats L86- L86-N L86-7 Easy to rig and adjust by hand. ero leats L87 ero base + L0 Nylon Junior L87-0 (Nylon) ero base + LMk Racing Junior L87- (Nylon & luminum) ero base + LMk Hard nodized Racing Junior L87-N (Nylon & luminum) ero base + L7Mk Side entry Racing Junior(Starboard) L87-7 (Nylon & luminum) ero base + L7 Mk Hard nodized Side entry Racing Junior (Starboard) L87-7N (Nylon & luminum) ero base + L8Mk Side entry Racing Junior(Port) L87-8 (Nylon & luminum) ero base + L8 Mk Hard nodized Side entry Racing Junior (Port) L87-8N (Nylon & luminum) ero base + L6 Roller Fairlead Racing Junior L87-6 (Nylon & luminum) ero base + L6 Hard nodized Roller Fairlead Racing Junior L87-6N (Nylon & luminum) /6- / - 6 /6- / - 6 /6- / - 6 /6- / - 6 /6- / - 6 /6- / - 6 /6- / - 6 /6- / - 6 /6- / /8 / /8 / /8 / /8 / /8 / /8 / /8 / /8 / /8 / L87-7N Side entry fairlead aids quick rigging and unrigging. L87-0 L87- L87-8N L87-6 Use L87-6, with roller fairlead, where rope forms a triangle. Move cleat along the rope by hand. No tools required. ero leats L88 ero base + L6 Nylon Micros L88-6 (Nylon) ero base + L68 Racing Micros L88-68 (Nylon & luminum) ero base + L68 Hard nodized Racing Micros L88-68N (Nylon & luminum) ero base + L70 Racing Micros with ecket L88-70 (Nylon & luminum) ero base + L70 Hard nodized Racing Micros with ecket L88-70N (Nylon & luminum) ero base + L77 Side entry Racing Micros (Starboard) L88-77 (Nylon & luminum) ero base + L77 Hard nodized Side entry Racing Micros (Starboard) L88-77N (Nylon & luminum) / 60 / 60 / 60 / 60 / 60 / 60 / L88-6 L88-68 L88-70N rig : or : L88-77 can be rigged : or :.

8 leats & hocks LN Kitesurfing leats L6N L5N L6 Racing Junior Mk LMkN (luminum) Trapeze and Vang leat L5 (luminum) L5 L5N (luminum) obra leat L6 (luminum) L6N (luminum) ar leat L65 (luminum + S/Steel) L65N (luminum + S/Steel) /6-6 /6 - / /8 /6 5/ / / /6.6 0 / / /6 / / L6 L65 The N suffix indicates an extra superior Hard nodized finish. The ultimate kite surfing rig for complete control, uses the L65 ar cleat and the in-line L6 obra cleat. ar diameter "- /6"ø (5 - ) L65 Power Grip leats L6 Power Grip L6 (luminum) Power Grip L6 (luminum) / / /6 / L6 The L6 Power Grip for single handed use, allows you to pull twice the load. Use the L6 Power Grip where even more pulling power and control is required. It is light, strong and easy to carry in your pocket. No more sore hands! L8 L7 Windsurfing leats ompact Twin Sheave leat L7 (luminum) leat with Hook and Sheaves L8 (luminum) Gauge /6 / /6 # No /8- /6 / /6.8 5 L50 L5 L708 The Gap loser L50 (luminum) Trapeze and Vang leat L5 (luminum) Rivet-on Fitting for 6: Ratio L708 (luminum) oom leat and lamp L (luminum + Nylon) /8- /6 / /6+ /8 / # No / /8- /6 / /6+ /8 / # No / / /6 58 / L L 5 6 djustable Outhaul L50 6: L8 + L708 6:

9 leats & hocks lamcleat rope cleats Insert leats L/L L/L Nylon Insert leat with Fairlead L/L 005 luminum Insert leat with Fairlead L/L 005 Twin Insert leat L7 (luminum) Small Insert leat L7 (luminum) Insert leat L75 (luminum) Very Small Insert leat L76 (luminum) /6 7/8-5 8 /8- /6 /8 7/6-5 /8- /6 5 /8 7/8 8 7 /8 / /8 7/6 0. n/a n/a n/a n/a n/a - /8-5 / 5/6 7/6 0. n/a L7 L7 L76 L75 The L7, L75 and L76 have been designed to snap-fit into a plastic molding to combine the strength of an alloy cleat with the lower cost of a molded component. Full installation details on our website. leat at this angle Quick cleating arrangement djust at this angle leat at this angle L76 djust at this angle Rope stays clear during tensioning Sail leats L Leech Line leat L (Nylon) Shield for L L (Nylon) /6- /6 70 / 5 /6 /6 7 / 5 /6 / L LP LP- ackplate for L LP (Nylon) ackplate lack for LN, L58N, L5N & L7N LP- (Nylon) Fine Line leat (Starboard) LW (Nylon) 000P 000P /6- /6 70 / 5 /6 /6 70 / 5 /6 /6 70 / 5 /6 / LW L Dinghy Leech Line leat L (Nylon) /8 7 / /6 /6 /8 0. L LP Sail Line leat L (Nylon) ackplate LP (Nylon) for L Racing Sail Line leat (Starboard) L LN (luminum) Racing Fine Line (Starboard) L58 L58N (luminum) Racing Fine Line (Port) L5 L5N (luminum) Sail Edge leat L67 (Nylon + luminum) P /6- / /8- / - /6-5 / 57 / /8 57 / /8 70 / 5 /6 /6 70 / 5 /6 /6 70 / 5 /6 / / L L5 L7 LN L58N L5N L58 L7N Sail Edge leat L6 (Nylon) Racing Sail Line leat (Port) L7 L7N (luminum) /6-5 / /6 70 / 5 /6 / L6 L67 lternative position for L (or L58) also LW,L5. L & L7 These also have alternative uses on rigid surfaces. L The L is supplied complete. Most L cleats L can be L sewn or L rivetted. L58 L LW L5 L7 Most cleats are available with or without backplates and rivets. The L shield prevents the L and L58 snagging in shrouds or other parts of the rigging. L67 & L6 The L67 is an alloy cleat inside a wrap-round nylon moulding. The L6 is all nylon. L/L L67 and L6 can be rivetted or sewn.

10 leats & hocks leats for ropes to 5 / Gauge L0 Midi L0 (Nylon) / /8 /8 / #.8 0 No 0.7 Side-fixing Midi L5 (Nylon) / / /8 /6 # No 0.5 L L5 L5 Midi with integral Fairlead L (Nylon) Racing Midi L5 L5N (luminum) Tapered Pad for L0, L5 & L5N L80 (Polypropylene) / / /6 /8 7/8 # No /8 /8 / 7 /8 5/6 # #.8 8 No..8 8 No 0. L5N L80 Tapered pads aid optimum rope alignment, especially when a fairlead would not be appropriate. L80 or L805 Tapered Pads can aid optimum rope alignment. leats for ropes to /8 Gauge L0 L06 Horizontal L0 (Nylon) Lateral (Starboard) L06 (Nylon) /- /8 6 - /- / /6 / /6 / / 6. 6 No No. L07 Lateral (Port) L07 (Nylon) /- / /6 / 6. 5 No. One of the first non-marine uses for lamcleat rope cleats was to tension and secure safety slings used by electricity and telephone engineers when working up ladders leaning against poles. leats for ropes to / Gauge L0 LN L Vertical L0 (Nylon) Racing Vertical L LN (luminum) Uncoated Racing Vertical LV (luminum) N 6 - /- / 6 - /- / 6 - /- / / /6 / /6 /6 / /6 /6 /6 / / / 6 No No No.5 LV Vertical with Integral Fairlead L8 (Nylon) Tapered Pad for L0, L, LN, L7 & L8 L80 (Polypropylene) /- / 7 0 / /6 /6 /6 /8 / / No No 0.6 L8 L80 The N suffix indicates an extra superior Hard nodized finish. Our aluminum cleats are easily welded to provide a strong and permanent fixing. Where an alloy cleat needs to be fixed to an aluminum surface welding can be less expensive than drilling holes and bolting on a cleat. pplications include aluminum fishing boats and oil rigs. LV

11 leats & hocks lamcleat rope cleats Trucker Hitch leat Trucker Hitch leat L7 (Nylon) /6- / 8 5 / /8 7.6 L7 n aerial cleat that rigs like the trucker's hitch / wagoner s hitch. Rig like this. Easy to use, can be fastened and released with one hand and operated from a distance. Uses a single piece of rope. Uses include aiding installation of machinery and heavy duty cables. Spring-gate leats for ropes to / Gauge Vertical with Spring-gate L7 (Nylon) /- / / /6 5 /8 / 6. 7 No.7 L7 Racing Vertical with Spring-gate L8 (luminum) /- / /6 /6 5 /8 / No.6 The red gate is flipped up by hand to keep the rope out of the cleat. L8 Spring-gate leats for ropes to 5 /8 L Major with Spring-gate L (Nylon) /8-5 /8 5 /6 / 5/6 88. Racing Major with Spring-gate L0 (luminum) /8-5 / /8 / /6 L0 leats for ropes to 5 /8 Major L05 (Nylon) /8-5 /8 5 6 /6 / 7 /6 5/ Racing Major L0 (luminum) /- 5 / /8 / / /6 L05 Uncoated Racing Major L0 (luminum) Fairlead for L05, L0, L & L0 L5 (Stainless Steel) Tapered Pad L805 (Polypropylene) 0000N /- 5 /8 5 /8 / / 50 / 5 /8 5 5 /8 / / /6 5. 5/6 5 L0 L0V L5 L05 + L5 L0 + L5 L805 L0V The L0V and LV, with uncoated finish, can be welded to an aluminum substrate.