Contractor Training Courses & Pre-requisites. January 2016
|
|
|
- Antony Riley
- 9 years ago
- Views:
Transcription
1 Contractor Training Courses & Pre-requisites January 2016
2 Available courses and pre-requisites It is very important that all participants have completed the course pre-requisites before attending our training. Otherwise, we cannot accept them into their nominated training courses. Following is information on all course pre-requisites. Evidence of completion must be ed to your Ergon Energy representative before attending nominated training. White Card all field based contractors All field-based contractors must complete the course Working safely in the construction industry (White Card). This training is available online through other training providers. Non-field based contractors do not need to complete this course unless we advise otherwise. Core Courses - all training participants All training participants must complete the following two core courses before their nominated elective course date: Course Code Core Course Description Duration Generic Contractor Worker Induction (GCWI) Administration and Overview Safety Awareness Environmental Awareness Cultural Heritage Awareness GCWI T0499 EASWNELP 4490 Completion timeframe for GCWI is 30 days from issue of log on. If course is not completed within this timeframe, renomination through your Ergon Energy representative will be required. No extensions will be given. Note: All contractors who undertake work on or in the vicinity of the Ergon Energy distribution network, need to complete the Electrical Awareness for Safe Working Near Exposed Live Parts course (see below) Electrical Awareness for Safe Working Near Exposed Live Parts (EASWNELP) Pre Requisite training for this course is GCWI Online 1.5hrs Classroom Based 6 8hrs page 1
3 Important information for Switching Authorisations All Switching Courses have both theory and practical components which must be completed and authorisation issued before progression to higher levels. When nominating for Switching Reassessments nominate to the highest level authorisation the participant currently holds. All lower level reassessments will be included as part of the nomination. When nominating to Switching Reassessments, you must provide evidence of completion of all pre-requisites, acknowledging that the applicant: 1. Has relevant practical experience in the 12 prior months to re-authorisation 2. Requires access to a High Voltage Enclosure Authorisation and/or continues to be performing a switching role 3. Is aware of the expectations and responsibilities of this role/authorisation. For more information on this, you can request a copy of the TT&D Switching & Access Authorisation Reference document from your Ergon Energy Representative. Ergon Energy has a 3 yearly reassessment and 12 monthly refresher period for all levels of authorisations. 12 monthly refreshers must be completed to maintain the authorisation or it will be suspended. For the first and second year, online theory refreshers are required. Face to face refresher sessions for Switching Operator Assistant and all levels above (theory & practical) will be required prior to the expiry date of the authorisation (i.e. third year). All refresher training for SEHVE and IOW will remain online. Switching & Access Reassessment nominations should be placed at least 3 months prior to expiry to ensure that delivery is met. Elective Courses Course Code Elective Course Description Duration 4431 Safe Entry to High Voltage Enclosures Required if needed to gain entry to HV Enclosures Note - Trainees or Apprentices may undertake training but cannot apply for Authorisation. Apprentices are not to undertake training within the first 6 months of their 8hrs apprenticeship. GCWI EASWNELP 8397 Safe Entry to High Voltage Enclosures (12 Monthly Refresher online) T0613 Safe Entry to High Voltage Enclosures (3 Yearly 4428 Operate the Network (Online) GCWI 2hrs EASWNELP Individual of a Workgroup Required if needed to gain access to the HV network Theory 4436 Operate the Network Practical 6hrs Safe Entry to High Voltage Enclosures page 2
4 Course Code Elective Course Description Duration 8398 Individual of a Workgroup (12 Monthly Refresher online) T0614 Individual of a Workgroup (3 Yearly Field Auto Reclose Operator (FARO) Individual of a Workgroup 8hrs 8404 Field Auto Reclose Operator (FARO) (12 monthly Refresher online) T0611 Field Auto Reclose Operator (FARO) (3 Yearly 8hrs Switching Operator Assistant 4441 Individual of a Workgroup 24hrs Cardio Pulmonary Resuscitation Safe to Approach & Touch Contractor Switching Operator Assistant - SWER Only 4449 Individual of a Workgroup 24hrs Cardio Pulmonary Resuscitation Safe to Approach & Touch Contractor 8399 Switching Operator Assistant (12 Monthly Refresher online) T0616 Switching Operator Assistant (3 Yearly T0463 Access Permit Recipient Lines Switching Operator Assistant Access Permit Recipient Lines - Vegetation Only T0463 Switching Operator Assistant Access Permit Recipient Lines - SWER Only T0463 Switching Operator Assistant - SWER Only T0605 Access Permit Recipient Lines Reassessment (3 Yearly Access Permit Recipient Substations 4476 Switching Operator Assistant T0605 Access Permit Recipient Substations Reassessment (3 Yearly Test Permit Recipient 4477 Switching Operator Assistant T0605 Test Permit Recipient Reassessment (3 Yearly Permit Recipient Reassessment (12 Monthly Refresher 8400 online) 4479 (Theory) 4478 (Practical) This refresher coves all levels Lines, Substations & Test Practical 4hrs Practical 4hrs Practical 4hrs Practical 8hrs Practical 12hrs page 3
5 Course Code Elective Course Description Duration Switching Operator Lines - SWER Only 4449 Theory 20hrs Access Permit Recipient Lines - SWER Only Practical 32hrs 8401 Switching Operator Lines - SWER Only (12 Monthly Refresher online) T0604 Switching Operator Lines - SWER Only Reassessment (3 Yearly 4480 Low Voltage Switching & Access (Evidence must be 6hrs provided with nomination) T0495 Working Safely with Asbestos (Online) T0490 Low Voltage Connections Manual - Polarity HV Live Work Pre-Authorisation Note: BS002201F105 (External Contractor Checklist T0345 for High Voltage Live Work) must be completed and ed to your Ergon Energy Representative before attending this training Line Asset Inspection Asset Inspector Assistant (3 months experience and T0481 completed log books) Note: Recognised Prior Learning (RPL) will be 80hrs considered where an individual has similar experience. Consideration will be given to each individual application Asset Inspection Final Assessment 1000 Pole Assessment 12hrs Line Asset Inspection Line Asset Inspection Final Competency Portfolio Earth Test Officer - MEN/CMEN (MEN/CMEN Earth Testing) GCWI T0170 EASWNELP 40hrs Safe to Approach & Touch (Contractor) or 6 months minimum experience as an Asset Inspector or equivalent experience within the distribution industry T0171 Earth Test Officer - SWER (SWER Earth Testing) MEN/CMEN Earth Testing 40hrs Line Asset Level 2 Serviceability Assessor T0173 Line Asset Inspection 40hrs Minimum 12 months as an Advanced Asset Inspector page 4
6 Course Code Elective Course Description Duration Asset Inspection Auditor - Lines Assets / MEN/CMEN / SWER Earth Testing) Line Asset Inspection Minimum 12 months as an Advanced Asset Inspector and/or Earth Test Officer Minimum 3 months experience as an Earth Test T0168 Officer with applicable authorisation if you hold an Electrical Workers Licence. Minimum 6 months 4 6hrs experience if you don t hold an Electrical Workers Licence Note: Audits will be carried out as below: o Poles only o Poles and SWER Earths combined o Poles and Non SWER Earths combined o SWER Earths only T0169 Line Asset Scheduler 8hrs T0584 Introduction to Field Force Automation (Online) 4082 Meter Reconnections Officer (MRO) 43hrs (3hrs online GCWI training to be Introduction to Field Force Automation EASWNELP completed prior to face to face) T0123 Meter Reconnections Officer (MRO) Reassessment (Online) MRO and Competency Portfolios 1.5hrs page 5
Contractor Connect Scheme Electrical Contractor and Worker Handbook
Contractor Connect Scheme Electrical Contractor and Worker Handbook January 2016 Document release information Document number 13553681 Document title Revision status Contractor Connect Scheme handbook
The Electrical Safety Regulation (pre and post 1 January 2014)
The Electrical Safety Regulation (pre and post 1 January 2014) The following table provides an overview comparison between the Electrical Safety Regulation 2002 (the ESR 2002) current as at 1 July 2013
WORKING IN THE ELECTRIFIED AREA
Network Safety Management System SPECIFICATION SAF/SPC/5178/ELE/NET WORKING IN THE ELECTRIFIED AREA Version 1.0 Effective Date: 12 October 2014 AURIZON COMMERCIAL-IN-CONFIDENCE SAF/SPC/5178/ELE/NET Working
High Voltage (HV) Electricity System Safety Rules and Associated Safety Guidance
Annex I To Loughborough University (LU) Facilities Management (FM) Health and Safety Policy High Voltage (HV) Electricity System Safety Rules and Associated Safety Guidance 1. Introduction a. These Safety
Customer Installation Safety Plan. March 2015
Customer Installation Safety Plan March 2015 Document History Issue No. Date Approved By Summary of Changes 1 June 2014 Chief Engineer Updated and revised in line with requirement for biennial review under
WHS Contractor Management Procedure
Wudinna District Council 1. Overview Wudinna District Council as part of its commitment under its Policy recognises its obligation to: Ensure, so far as is reasonably practicable, the health and safety
Pre-Apprenticeship Training Apprentice Training Post-Trade Training Short Refresher Courses
The College of Electrical Training (CET) is the major private training provider for the Western Australian electrical & telecommunications industries. Course Delivery Profile Pre-Apprenticeship Training
Asbestos Policy ASBESTOS POLICY. Version 2 / Jun 2015 Page 1 of 11 Asbestos Policy
ASBESTOS POLICY Version 2 / Jun 2015 Page 1 of 11 Asbestos Policy This is a controlled document. It should not be altered in any way without the express permission of the author or their representative.
Training Management Guidelines
Training Management Guidelines February 2009 Training Management Guidelines - February 2009 These guidelines provide a strategic approach to training and skills development in the construction industry
WHS CONTRACTOR MANAGEMENT PROCEDURE
1. Overview The Port Augusta City Council as part of its commitment under its WHS Contractor Management policy, recognises its obligation to: Ensure, so far as is reasonably practicable, the health and
Strategic Industry Audit Report
Strategic Industry Audit Report www.tac.wa.gov.au 2012 Strategic Industry Audit of qualifications which lead to an electrician s licence in Western Australia The Training Accreditation Council conducted
Phase Attribute Identification using GPS Technology
Phase Attribute Identification using GPS Technology Date 11 June 2009 John Sinclair Power Quality Manager Slide 1 Topics of Discussion Remote Phase Identification How it works Principals of operation Benefits
COMPETENCY TRAINING STUDENT HANDBOOK
Competency Training Pty Ltd ABN 32 113 051 139 433 Boundary Street Spring Hill QLD 4000 Ph 1300 872 585 Fax +61 (0)7 3217 8077 www.competencytraining.com.au COMPETENCY TRAINING STUDENT HANDBOOK File :
BSB51415 Diploma of Project Management. Course Overview
BSB51415 Diploma of Project Management Course Overview Table of Contents 1. Welcome... 2 1.1 The Victorian Chamber Team... 2 2. BSB51415 Diploma of Project Management... 2 2.1 Program Information... 2
BSB40215 - Certificate IV in Business
Academy Of Training BSB40215 - Certificate IV in Business This qualification reflects the role of individuals who apply a broad range of competencies in a varied work context using some discretion, judgment
Recognition of Prior Learning (RPL) BSB51107 Diploma of Management
Recognition of Prior Learning (RPL) BSB51107 Diploma of Management What is RPL? RPL recognises that you may already have the skills and knowledge needed to meet national competency standards. Instead of
Recognition of Prior Learning (RPL) BSB41515 Certificate IV in Project Management Practice
Recognition of Prior Learning (RPL) BSB41515 Certificate IV in Project Management Practice What is RPL? RPL recognises that you may already have the skills and knowledge needed to meet national competency
Asbestos licensing and notification guide for applicants
Asbestos licensing and notification guide for applicants Use this guide if you are: applying for an asbestos removal work licence applying for an asbestos assessor licence notifying of asbestos removal
Form 11 Application for electrical work licence/permit (other than apprentice)
Electrical Safety Office Form 11 Application for electrical work licence/permit (other than apprentice) V15.06-2014 Electrical Safety Act 2002 If you are applying for an additional electrical work training
Asbestos Removal and Assessor Licensing Information
Asbestos Removal and Assessor Licensing Information January 2013 Version 1.0 - GB366 1 2 Contents Introduction 5 Why you need a licence 5 Why you need to notify 5 Licence types 5 Class A asbestos removal
Declaration of Apprenticeships and Traineeships in Queensland
Declaration of Apprenticeships and Traineeships in Queensland Approving Authority Director, Queensland Apprenticeship and Traineeship Office (QATO) Approval Date 27 June 2014 Effective Date 01 July 2014
THE VOCATIONAL GRADUATE CERTIFICATE IN LOCAL GOVERNMENT MANAGEMENT
THE VOCATIONAL GRADUATE CERTIFICATE IN LOCAL GOVERNMENT MANAGEMENT IT S THE CAREER ACCELERATOR FOR COUNCIL MANAGERS SUBJECT CHOICES Govern councils Manage the human resources process in local government
TAE40110 Certificate IV in Training and Assessment
TAE40110 Certificate IV in Training and Assessment Course information and vocational outcomes This is a nationally accredited qualification that reflects the roles of individuals delivering training and
Steam Boiler Training
Steam Boiler Training About Us... Industrial Services Limited are the leading independent service provider to the United Kingdom s energy market. Offering a range of core services we are the total energy
ENVIRONMENTAL POLICY & MANAGEMENT SYSTEM GUIDE
ENVIRONMENTAL POLICY & MANAGEMENT SYSTEM GUIDE 1 Statement of Intent Corps Security aims to create and maintain through staff awareness, the highest level of environmental responsibility. We regard the
Measuring your capabilities in Workplace Safety Management
Working with business Measuring your capabilities in Workplace Safety Management ACC Workplace Safety Management Practices Audit Standards Contents Section 1 Audit standards for ACC s Workplace Safety
RPL Kit - A Transition Guide
Diploma of OHS (BSB51307) to the Diploma of WHS (BSB51312) Transition RPL Kit A Transition Guide This process/course is designed for candidates who currently hold a Diploma of Occupational Health and Safety
PICAC TRAINING SCHEDULE
Plumbing Industry Climate Action Centre 6/306 Albert Street Brunswick VIC 3056 T (03) 9356 8902 F (03) 9356 8929 [email protected] PICAC TRAINING SCHEDULE JANUARY JUNE 2014 2014 22138VIC Certificate
ONSITE TRACK EASY Campbell Arnott s Contractor Management Portal Portal User Guide: Employee Registration & Induction Bookings
ONSITE TRACK EASY Campbell Arnott s Contractor Management Portal Portal User Guide: Employee Registration & Induction Bookings http://campbellsarnottscontractor.com.au 1300 305 072 CONTENTS Overview...
CPC40308 Certificate IV in Building and Construction (Estimating) Course Information Sheet
About the course The role of a construction estimator and / or scheduler will be explored through the concepts of plan reading, materials performance, risk management, estimating, project scheduling, tender
ASBESTOS REMOVAL LICENCE ASBESTOS NOTIFICATIONS
GUIDE FOR APPLICANTS ASBESTOS REMOVAL LICENCE ASBESTOS NOTIFICATIONS TABLE OF CONTENTS INTRODUCTION... 2 WHY YOU NEED A LICENCE... 2 WHY YOU NEED TO NOTIFY... 2 LICENCE TYPES... 2 SCOPE... 2 WHO MAY APPLY
Recognition of Prior Learning (RPL) BSB04507 Certificate IV in Business Administration
Recognition of Prior Learning (RPL) BSB04507 Certificate IV in Business Administration What is RPL? RPL recognises that you may already have the skills and knowledge needed to meet national competency
CIVIL AVIATION REQUIREMENTS SECTION 7 FLIGHT CREW STANDARDS TRAINING & LICENCING SERIES D PART III
GOVERNMENT OF INDIA OFFICE OF THE DIRECTOR GENERAL OF CIVIL AVIATION TECHNICAL CENTRE, OPP SAFDURJUNG AIRPORT, NEW DELHI. CIVIL AVIATION REQUIREMENTS SECTION 7 FLIGHT CREW STANDARDS TRAINING & LICENCING
Welcome to Asset Training Australia!
Welcome to Asset Training Australia! Asset Training Australia is a registered training organisation (RTO # 31718) delivering nationally recognised qualifications across Australia. Our scope includes accredited
ASBESTOS MANAGEMENT PLAN
ASBESTOS MANAGEMENT PLAN PREPARED BY: Scott Gregory: Estates - Property Services DATE: 18/04/2014 STATUS: Draft ISSUE: 2014 (02) September 2014 NEXT REVISION DATE: April 2014 Contents 1.0 Introduction
Service & Installation Rules 2014
Victorian Electricity Distributors Service & Installation Rules 2014 These Service & Installation Rules form the following Distributors Reasonable Technical Requirements for the connection of electrical
Student Course Guide. Certificate IV in Training and Assessment TAE40110
Student Course Guide Certificate IV in Training and Assessment TAE40110 Head Office: 6 Emerald Street, Cooroy, 4563, QLD Email: [email protected] www.euphoriagroup.net.au Tel: 07 5472 0119
Rail Safety Worker. Competency Management Briefing. 27 Feb 12
Rail Safety Worker Competency Management Briefing 27 Feb 12 Objectives for the Presentation 01 Introduction 02 Rail Safety Work 03 Approach to Competency Management 04 2012 Project Timeline 05 Pegasus
Pennsylvania Summer Reliability
A. Reliability Enhancement Programs In 2015, Pennsylvania Power Company s ( Penn Power or Company ) reliability plan incorporates projects and programs to enhance overall reliability. The plan is structured
TRAINING RESOURCE MANUAL NATIONAL SPECIALISED ELECTRICAL WORK RECORD OF WORK EXPERIENCE AND TRAINING UEENEEP024A UEENEEP017A. EE-Oz Training Standards
TRAINING RESOURCE MANUAL NATIONAL SPECIALISED ELECTRICAL WORK UEENEEP024A UEENEEP017A RECORD OF WORK EXPERIENCE AND TRAINING 1 CONTENTS Learner s Personal Details Page 3 Background Information Page 4 Definitions
Operational Control of the UKPN Low Voltage Distribution Network for EPN and LPN Regions
Operational Control of the UKPN Low Voltage Distribution Network for EPN and LPN Regions Owner Name Title Signature Steve White Head of Network Control and Operations Date 16 February 2016 Authoriser Name
CONNECTING YOU TO SPECIALIST ELECTRICAL SUPPORT services
CONNECTING YOU TO SPECIALIST ELECTRICAL SUPPORT services SpecialistS IN ELECTRICAL SUPPORT SERVICES TO MINING, UTILITIES & industry Ampcontrol is committed to supporting our customers to maintain efficient
WHS-02 Safety Management System Procedure
Table of Contents Table of Contents... 1 1 Purpose... 3 2 Scope... 3 3 Roles and Responsibilities... 3 4 Definitions... 4 5 References... 5 6 Records... 5 7 Principles... 5 7.1 Safety Management Cycle...
Adelaide College of Technology
Adelaide College of Technology Training and Assessment Strategy BSB51107 Diploma of Management Page 1 of 13 DOCUMENT NAME: Training and Assessment Strategy- BSB51107 November 2014 1.2 Version Control Title:
EDB Information Disclosure Requirements Information Templates for Schedules 11a 13
EDB Information Disclosure Requirements Information Templates for Schedules 11a 13 Disclosure Date 31 March 2015 Start Date (first day) 1 April 2015 Templates for Schedules 11a 13 (Asset Management Plan)
For information only Not all programs are provided by HSAS TRAINING PROGRAM DURATION STATUS SOURCE TARGET OUTCOME ASBESTOS
ASBESTOS Remove Non-Friable Asbestos (CPCCDE3014A) Mandatory nationally accredited training for NSW asbestos licensing purposes, with WorkCover approval Non-friable asbestos workers & wallet size card
ES 4 Service Provider Authorisation
ES 4 Service Provider Authorisation June 2015 WARNING It is the responsibility of the user of this document to ensure that only the current version is being used. Ausgrid may amend this document at any
Connecting to the network information pack Version 2
Connecting to the network information pack Version 2 Updated: Contents 1.0 What is a new connection or connection alteration?... 3 2.0 Connection enquiry... 3 3.0 Connection application... 3 3.1 Processing
Recognition of Prior Learning (RPL) Certificate III in Business Administration
Recognition of Prior Learning (RPL) Certificate III in Business Administration What is RPL? RPL recognises that you may already have the skills and knowledge needed to meet national competency standards.
Corporate Standard. Contractor Management
WORK HEALTH & SAFETY CORPORATE STANDARD Accountability Head of People and Culture Corporate Standard Contractor Management 14/6/12 TABLE OF CONTENTS Requirements\Controlled s - Restricted Access\5. Works
NVQ Level 2 Diploma for Asbestos Removal Operatives. Overview on OSAT and SUP routes
NVQ Level 2 Diploma for Asbestos Removal Operatives Overview on OSAT and SUP routes NVQ Level 2 Diploma in Removal of Hazardous Waste (Construction) Licensed Asbestos On-Site Assessment and Training (OSAT)
MANAGED TRAINING SERVICES
MANAGED TRAINING SERVICES INNOVATIVE TRAINING AND MANAGEMENT SYSTEM WITH FIXED PRICE FEE STRUCTURE Quality training by industry experts Training qualifications and recertifications tracked through centralised
INDUSTRIAL ELECTRICIAN
INDUSTRIAL ELECTRICIAN Occupation Description "Industrial " means a person who inspects, installs, tests, troubleshoots, repairs, and services industrial electrical equipment and associated electrical
Electrical Safety Office. Eligibility and other requirements for an electrical licence
Electrical Safety Office Eligibility and other requirements for an electrical licence May 2014 Electrical Safety Office Eligibility and other requirements for an electrical licence Change control Version
THE ELECTRICAL CONTRACTOR SAFETY PROGRAM GUIDE
THE ELECTRICAL CONTRACTOR SAFETY PROGRAM GUIDE December 2013 Electrical Hazard Warning Sign Disclaimer Whilst this guide endeavours to provide general information on work health and safety issues relating
Government of Western Australia Department of Transport. How to become a licensed Driving Instructor in Western Australia.
Government of Western Australia Department of Transport How to become a licensed Driving Instructor in Western Australia Information Pack Last Updated August 2010 L Requirement Act 1963 requires that any
Community Learning and Skills Service. Contract Management 2015/16. Guidance for providers. Slough and RBWM
Community Learning and Skills Service Contract Management 2015/16 Guidance for providers Slough and RBWM CONTENTS 1. Purpose... 3 2. About East Berkshire Community Learning and Skills Service... 4 3.
FMCF certification checklist 2014-15 (incorporating the detailed procedures) 2014-15 certification period. Updated May 2015
FMCF certification checklist 2014-15 (incorporating the detailed procedures) 2014-15 certification period Updated May 2015 The Secretary Department of Treasury and Finance 1 Treasury Place Melbourne Victoria
Attachment 7.2 SA Power Networks: Safety, Reliability, Maintenance and Technical Management Plan (Manual 14)
Attachment 7.2 SA Power Networks: Safety, Reliability, Maintenance and Technical Management Plan (Manual 14) SAFETY, RELIABILITY, MAINTENANCE & TECHNICAL MANAGEMENT PLAN Manual No. 14 Published: August
TECHNICAL SERVICES Guideline
1.0 INTRODUCTION 1.1 Purpose The purpose of this guideline is to describe the qualification requirements and assessment process of becoming a Competent Person (CP) and/or Authorised Person (AP) to work
The Electrical Contractor Safety Program Guide
The Electrical Contractor Safety Program Guide September 2013 Electrical Hazard Warning Sign Disclaimer Whilst this guide endeavors to provide general information on work health and safety issues relating
Clinical Coding Trainer Programme Train the Trainer Course
Clinical Coding Trainer Programme Train the Trainer Course Overview This practical, skills-based programme allows recently qualified Approved Apprentice Clinical Coding Trainers to practice their newly
CERTIFICATE III Property Services (Agency) - CPP30211. CERTIFICATE IV Property Services (Real Estate) - CPP40307
REIT Training CERTIFICATE III Property Services (Agency) - CPP30211 CERTIFICATE IV Property Services (Real Estate) - CPP40307 DIPLOMA Property Services (Agency Management) - CPP50307 Student Handbook View
COMMISSIONING TESTS FOR HV UNDERGROUND CABLES (UP TO 33KV) SWP
1. PURPOSE AND SCOPE The purpose of this Standard Work Practice (SWP) is to standardise and prescribe the method for pre commissioning and commissioning tests on high voltage underground cables. Where
Trainers Assessors Detailed Requirements
QUALIFICATION AND EXPERIENCE REQUIREMENTS Below are the lists of both Nationally Recognised Training (NRT) and non NRT Training requirements. The training qualification requirements differ, depending on
Recognition of Prior Learning and Credit Transfer Policy & Procedure RTO No 22234
Recognition of Prior Learning and Credit Transfer Policy & Procedure RTO No 22234 Policy 1.1 Ashton College employs a fair and equitable policy for Recognition of Prior Learning and Credit Transfer. 1.2
HEALTH SAFETY & ENVIRONMENT MANAGEMENT SYSTEM
HEALTH SAFETY & ENVIRONMENT MANAGEMENT SYSTEM September 2011 OUR HEALTH, SAFETY AND ENVIRONMENT POLICY OUR PRINCIPLE OF DUE CARE We care about the wellbeing of our people and our impact on the environment.
Code of Practice Electricity transmission and distribution asset management. February 2009
Code of Practice Electricity transmission and distribution asset management February 2009 CONTENTS 1 PREFACE...4 2 APPLICATION AND OBJECTIVES...5 3 SCOPE...6 4 DEFINITIONS...7 5 DESIGN AND CONSTRUCTION...11
CHC50608 Diploma of Community Services Work
Course outline ANIBT Course Code: DCSW_DOM0612 CRICOS Code: This course is not currently available to International students Delivery Mode: Face to Face Classroom Residential Workshop On-line/Distance
Abu Dhabi EHSMS Regulatory Framework (AD EHSMS RF)
Abu Dhabi EHSMS Regulatory Framework (AD EHSMS RF) Technical Guideline Audit and Inspection Version 2.0 February 2012 Table of Contents 1. Introduction... 3 2. Definitions... 3 3. Internal Audit... 3 3.1
Recognition of Prior Learning (RPL) BSB50613 Diploma of Human Resource Management
Recognition of Prior Learning (RPL) BSB50613 Diploma of Human Resource Management What is RPL? RPL recognises that you may already have the skills and knowledge needed to meet national competency standards.
ADVANCED. Course Code: BSB60615. www.asset.edu.au
ADVANCED Course Code: BSB60615 Welcome to Asset Training Australia! Asset Training Australia is a registered training organisation (RTO # 31718) delivering nationally recognised qualifications across Australia.
Circuit Electrical Testing
Safe Isolation Procedure Circuit Electrical Testing Site Safety Management It is essential from the outset that effective management and control of the system, apparatus and equipment used on site is achieved
COURSE PROFILE BSB41407 CERTIFICATE IV IN OCCUPATIONAL HEALTH & SAFETY
P-E HANDLEY-WALKER TRAINING Pty. Ltd. ACN 150 893 931 ABN 12 150 893 931 RTO No. 21789 P.O. Box 681 Mornington VIC 3931 Ph: (03) 9708 8809 Fax: (03) 9775 4607 www.pehw.net.au BSB41407 CERTIFICATE IV IN
ELECTRICAL INSULATION TESTING OF HV EQUIPMENT UP TO 33kV
1. SCOPE This document details PowerSystems requirements for electrical testing of HV Equipment up to and including 33kV. 2. ISSUE RECORD This is a Reference document. The current version of Controlled
University of Leicester Sports and Recreation Service. Statement on Safety in University Sports Facilities
University of Leicester Sports and Recreation Service Statement on Safety in University Sports Facilities Introduction The Sport and Recreation Service is an independent service within the University.
ECTARC offers the following interest free, pay as you progress financial plans for courses studied via distance study or traineeship/apprenticeship.
ECTARC offers a simple, affordable way to study ECTARC offers the following interest free, pay as you progress financial plans for courses studied via distance study or traineeship/apprenticeship. Distance
MV, HV AND EHV SWITCHGEAR TESTING & COMMISSIONING
Training Title MV, HV AND EHV SWITCHGEAR TESTING & COMMISSIONING Training Duration 5 days Training Date MV, HV and EHV Switchgear Testing & Commissioning 5 20 24 Apr $3,750 Dubai, UAE In any of the 5 star
City of Belmont Contractor Induction Program
City of Belmont Contractor Induction Program Page 1 of 17 14 March 2011 Source: OSH Date: 13/12/2013 City of Belmont Contractor Induction Program Table of Contents TABLE OF CONTENTS... 1 INTRODUCTION...
AUDITING GUIDELINES FOR CERTIFICATION BODIES FOR PSA 28:2013
AUDITING GUIDELINES FOR CERTIFICATION BODIES FOR PSA 28:2013 June 2014 www.psa.gov.ie 1. AUDITING GUIDELINES...4 2. GENERAL...5 2.1 PSA Licensing Requirements...5 2.2 Audits...5 2.3 Audit Compliance...7
HUMAN RESOURCES TRAINING & DEVELOPMENT PLAN
HUMAN RESOURCES TRAINING & DEVELOPMENT PLAN TSC HR Plan 020 02 2010 ADOPTED: 30.9.2010 RESOLUTION NO: TABLE OF CONTENTS AIM... 1 INTRODUCTION... 1 POLICY STATEMENT... 1 ASSESSING TRAINING REQUIREMENTS...
Asbestos Management Policy (Version 3)
Asbestos Management Policy (Version 3) Contents Page Introduction 3 College Policy Statement for Asbestos Management 3 Objectives (of this Policy and Procedure) 3 Application of Policy 4 Licensed Asbestos
INDUSTRY WIDE LABOR-MANAGEMENT SAFETY COMMITTEE SAFETY BULLETIN #23
INDUSTRY WIDE LABOR-MANAGEMENT SAFETY COMMITTEE SAFETY BULLETIN #23 GUIDELINES FOR WORKING WITH PORTABLE POWER DISTRIBUTION SYSTEMS AND OTHER ELECTRICAL EQUIPMENT "ADDENDUM C" WORKING WITH 480 VOLT SYSTEMS
CHECKING AND TESTING ELECTRICAL INSTALLING WORK
CHECKING AND TESTING ELECTRICAL INSTALLING WORK Department of Consumer and Employment Protection Energy Safety Preface It is a requirement of the Electricity (Licensing) Regulations 1991 that all electrical
BSB41007 Certificate IV in Human Resources (Superseded)
BSB41007 Certificate IV in Human Resources (Superseded) 2013 Reference Kit *Important Notice: BSB41007 Certificate IV in Human Resources has now been superseded by BSB41013 Certificate IV in Human Resources.
DRAFT 8 th January 2015 Senior Chef Apprenticeship in Culinary Arts Standard Assessment Plan. Introduction
DRAFT 8 th January 2015 Senior Chef Apprenticeship in Culinary Arts Standard Assessment Plan Introduction Hospitality employers, recognised by the Department for Business Innovation and Skills (BIS) as
The process of documenting knowledge and skills, usually in measurable terms. Person who assesses a participant to determine level of competence.
WHS UNIT WHS TRAINING GUIDELINES Contents 1 Introduction... 2 2 Legislative Requirements... 2 3 Definitions... 2 4 Responsibilities... 3 4.1 Senior Executive, Deans and Directors... 3 4.2 Management of
Procedure: OHS CONTRACTOR MANAGEMENT
Procedure: OHS CONTRACTOR MANAGEMENT. Purpose This procedure outlines the occupational health and safety (OHS) requirements for the management of contractors engaged to perform tasks or services for Greater