3D Crystalline di!raction
|
|
|
- Dylan Morrison
- 9 years ago
- Views:
Transcription
1 Nanomaterials and Nanoarchitectures Programme of Advanced Study Institute Lecture 2.5 Soft colloidal photonic crystals and prospective applications Hiroshi Fudouzi National Institute for Materials Science Lecture 2.5 July 2, 2013, ASI NATO 1 2 National Institute for Materials Science NIMS Research Fields Outline Short history 1956 National Research Institute for Metals (NRIM) 1966 National Institute for Research in Inorganic Materials (NIRIM) 2001 Merger of NRIM and NIRIM in April, becoming National Institute for Materials Science (NIMS). 1. Overview of soft colloidal photonic crystals 2. Opal photonic crystals with tunable color 3. Tuning structural color by swelling 4. Tuning structural color by strain 5. Prospective applications 3 4! " ".+((53) #'6.+78$% Tuning photonic band gap of opal composite! "!"µ#! # %"$# 9$/47.43,+//'%-):;</8)&$*+'%= Opal composite (3D close packed) %"!# ) ccp (111) )!"$# d 111 Elastomer "$%&'%() *+,-.'+/!"!# 2 Silica opal bulk infilled with polymer #$%&&&$'()$*+,+-$./01)23$/4$!,,51)6$7(38108$ 5 6
2 3D Crystalline di!raction Tunable structural color Gel frame Void Non close packed (Cross section) Sphere (i) Colloidal crystal (ii) Opal type (iii) Inverse Opal type Self-assembly bottom up process to form periodic 3D microstructure made of colloids Opal composite (3D close packed) Embedded particle Inverse Opal (Cross section) ccp (111) plane Elastomer d 111 Frame structure Foulger, S. H. et al., Adv. Mater. 2003, 15, 685. Mechanical Stress Fudouzi, H.; Xia, Y. N. Adv. Mater. 2003, 15, 892. Photonic Paper/Ink Takeoka, Y.; Watanabe,M. Adv. Mater. 2003, 15, 199. Chemical Sensing 7 8 Colloidal crystals Polymerized Colloidal Crystal Hydro-gel as Intelligent Chemical Sensing Materials Metal ion sensing Thermo sensing Molecular sensing S. H. Foulger, Adv. Mater. 2005, 17, 2463, (2005) S.A. Asher et al., Nature 389, 829(1997). S.A. Asher et al., Science 274, 959(1996) Colloidal Photonic Crystal Gels (T. Sawada) M-Ink:Tunable strctural color by magnetic field Silica colloidal crystal embedded in hydrogel Y. Iwayama, J. Yamanaka, Y. Takiguchi, M. Takasaka, K. Ito, T. Shinohara, T. Sawada and M. Yonese : Optically Tunable Gelled Photonic Crystal Covering Almost the Entire Visible Light Wavelength Region Langmuir (2003) A. Toyotama, T. Kanai, T. Sawada, J. Yamanaka, K. Ito and K. Kitamura : Gelation of Colloidal Crystals without Degradation in Their Transmission Quality and Chemical Tuning Langmuir(2005) S. Furumi, T. Kanai and T. Sawada : Widely Tunable Lasing in a Colloidal Crystal Gel Film Permanently Stabilized by an Ionic Liquid Advanced Materials (2011) 11 12
3 Inverse opal Inverse opal sensors Y. Takeoka, Langmuir, Opalux & Prof. Geoffrey A. Univ. Toronto P-Ink and Elast-Ink New display device 2. Opal photonic crystals with tunable color Materials Today, Vol. 11, # 7-8, 2008, pp New finger print technology for biometric security systems 17 18
4 Colloidal crystal film &',,'.$%)=+(#( Substrate /8",,.9":'1 &'#(-)+(,,%&',,'.$/!"#$%&'#( )'*%)+(,, Prepolymer <'1'5(# ,,.12 &'-"//(56,7 &;#.12 0#$(#.12 Curing Elastomer sheet PS-PDMS composite D istance of CCP(111) planes D: 18 nm 2.8 [nm] Number of Curing PDMS elastomer Increasing lattice distance of ccp(111) planes Polymer opal (Core-shell colloid) Elastic Photonic crystals (Polymer Opal) JJ Baumberg (University of Cambridge), Deutsches Kunststoff-Institut and Merck. 6!"#$ (&)*+!"%&' 1!"#$%&''(") 9 ( 540"*& #&.)/0&1 2"+3)40& *, 8&9')0:;&1 154*&< *"+,-.//0-1#&%(23)-!4&#(235-6"2(&78- Photonic rubber sheet Fudouzi & Sawada, NIMS * :6"2*;5.) 36" ""< = Structural color fashion (April 23, 2012) ( A collaboration between Amy Winters and researchers at the NanoPhotonics Centre at the Cavendish laboratories (University of Cambridge) resulted in a new type of fabric, the Polymer Opal Lycra
5 Tuning structural color by swelling 3. Tuning structural color by swelling PS Colloid PDMS elastomer : < ; = >!"#$$%"&'(")*+,(-."*/"0*12(3"&(+'4*5*6." Change color by swelling isopropanol H. Fudouzi & YN Xia, Langmuir 2003, 19, (23),
6 ADVMEW ISSN Vol. 17, No. 2 January 31, 2005 Multicolor Patterns in Photonic Bandgap Composites D10488 Printing structural color: Photonic paper & ink system 4. Tuning structural color by strain Colloidal Crystals with Tunable Colors and Their Use as Photonic Papers Fudouzi & Xia Langmuir 2003 Fixing structural color image Foulger, Adv. Mater High Resolution Reversible Color Images on Photonic Crystal Substrates Erickson, Langmuir Tunable structural color on soft opal films Tuning structural color by elastic deformation Y-direction Initial Stretched H. Fudouzi and T. Sawada, Langmuir 22, (2006) 33 Wavelength (nm) !L/L (%) 0 34 Elastic deformation by compressing and vending Elastic deformation by inflation Wavelength (nm) L (%) 35 36
7 0.0 Strain sensor Pressure sensor Change color due to plastic deformation Stretching force(n) st 2nd (nm) Peak shifting as a function of stretching force Optical microscope image of local deformation 5. Prospective Applications I. Liquid sensor II. Solubility parameter III. Strain imaging
8 Sensitivity for a small quantity of water in isopropanol Swelling PDMS elastomer in isopropanol(ipa) containing less than 1 Vol% pure water Defect in photonic band gap! Dip tuning Detectable concentration! 0.1 Vol% order 43 G.A.Ozin, Silica opal film for xylene sensing Theory of swelling phenomena Silica sphere Acrylate elastomer "G Swelling range Gibbs free energy change of mixing -"G reach maximum! Kevin Kulbaba, Mark J. MacLachlan, Christopher E. B. Evans, Ian Manners Macromolecular Chem Phys, 202, , 2001 Determination of the solubility parameter for unknown polymer or elastomer The degree of swelling! a maximum at To plot the swelling ratio as a function of " Collaborating with Kyoritsu Chemical Indusrial Co., Ltd A B L L Peak Shift (nm) Volume expansion by swelling with cyclohexane for a day Swelling ratio as a function of solubility parameter ([Cal/cm] 1/2 ) Solubility Parameters Peak shift by swelling as a function of solubility parameter ([Cal/cm] 1/2 ) 47 48
9 Concept A new method enables coating colloidal photonic crystal film on surface of metal plate. Structural color strain indicator consists of soft opal coloring film and black colored PET supporting sheet. This sheet adhered to the target area. A polyethylene terephthalate film (PET, Lumirror X30, Toray Industries, Inc., Tokyo, Japan) of 50 µm thicknesses was used as a black-pigmented sheet. Cyanoacrylate monomer liquid (Aron alpha EXTRA2000, Toagosei, Tokyo, Japan) was used as an adhesive between PET sheet and pure aluminum specimens. Y-direction Initial Stretched!!!!!!!!!!!!!!!!!!!!"" Universal testing machine Setup of fiber optical probe 49 50! 0123 Structural color imaging on optical microscope *+,#-.&&/ " 0&1&2*$(2&,-$3/ 0&1&2*$(2&,-$3/ #$%&'&()*+,-(./ ##(&)! #$%&&' " 4#5675#89:1&/;#9<#*.9/9#=>?:@2#A'-/%B3&'/@?9'#+'C1'&&%-## Comparison of techniques Setup concept using two type of strain sensors, optical probe spectroscope for structural color strain indicator of electric strain gauge and electric strain $ gauge backside the plate. For further information!,-./%0(1$23+( "-+/#$27/2-+( "#$%&'()%*)+( 4+%5( 6&$+( The relationship between micro-strain and Bragg s diffraction peak showing a linear inverse proportion. Inserted photo shows the deformed aluminum plate after tensile test. # :0";+<-2,=.3">52?"@3AB " Strain gauge system (KYOWA Electronic Instruments) "($'""""""(%!""""(%'""""(&!""""(&'""""('!"""""(''"""((! " 1600 µst/nm!""""""""#"""""""""$"""""""""%"""""""""&""""""""'"""""""""("")#! &" " """""*+,-./01-2+3".4"565,1-+,"72875" RSC Smart Materials Responsive Photonic Nanostructures Yadong Yin (Ed.), RSC publisher (2013) Nanochemistry: A Chemical Approach to Nanomaterials, Geoffrey A Ozin, André Arsenault, RSC publisher(2008) Foundation and applications on photonic crystals (only Japanese), Katsumi Yoshino, Corona publishing (2004) Project report Tuning photonic band gap on opals and inverse opals (with Prof. Sajeev John) * Theory on tunable PhC * Synthesis opal and Inv Opal * Tuning by (Temp., LQs, Stress, Electric field,...) 53 54
JOURNAL INTEGRATED CIRCUITS AND SYSTEMS, VOL 1, NO. 3, JULY 2006. 39
JOURNAL INTEGRATED CIRCUITS AND SYSTEMS, VOL 1, NO. 3, JULY 2006. 39 Self-Assembled Polystyrene Micro-Spheres Applied for Photonic Crystals and Templates Fabrication Daniel S. Raimundo 1, Francisco J.
Back to Basics Fundamentals of Polymer Analysis
Back to Basics Fundamentals of Polymer Analysis Using Infrared & Raman Spectroscopy Molecular Spectroscopy in the Polymer Manufacturing Process Process NIR NIR Production Receiving Shipping QC R&D Routine
Light management for photovoltaics using surface nanostructures
Light management for photovoltaics using surface nanostructures Roberta De Angelis Department of Industrial Engineering and INSTM, University of Rome Tor Vergata New Materials For Optoelectronics webnemo.uniroma2.it
Modern Construction Materials Prof. Ravindra Gettu Department of Civil Engineering Indian Institute of Technology, Madras
Modern Construction Materials Prof. Ravindra Gettu Department of Civil Engineering Indian Institute of Technology, Madras Module - 2 Lecture - 2 Part 2 of 2 Review of Atomic Bonding II We will continue
Basic principles and mechanisms of NSOM; Different scanning modes and systems of NSOM; General applications and advantages of NSOM.
Lecture 16: Near-field Scanning Optical Microscopy (NSOM) Background of NSOM; Basic principles and mechanisms of NSOM; Basic components of a NSOM; Different scanning modes and systems of NSOM; General
Nanoscience Course Descriptions
Nanoscience Course Descriptions NANO*1000 Introduction to Nanoscience This course introduces students to the emerging field of nanoscience. Its representation in popular culture and journalism will be
Opaline Photonic Crystals: How Does Self-Assembly Work?
Opaline Photonic Crystals: How Does Self-Assembly Work? David J. Norris Chemical Engineering & Materials Science, University of Minnesota 1μm silica spheres See: D. J. Norris, E. G. Arlinghaus, L. Meng,
ORIENTATION CHARACTERISTICS OF THE MICROSTRUCTURE OF MATERIALS
ORIENTATION CHARACTERISTICS OF THE MICROSTRUCTURE OF MATERIALS K. Sztwiertnia Polish Academy of Sciences, Institute of Metallurgy and Materials Science, 25 Reymonta St., 30-059 Krakow, Poland MMN 2009
The atomic packing factor is defined as the ratio of sphere volume to the total unit cell volume, or APF = V S V C. = 2(sphere volume) = 2 = V C = 4R
3.5 Show that the atomic packing factor for BCC is 0.68. The atomic packing factor is defined as the ratio of sphere volume to the total unit cell volume, or APF = V S V C Since there are two spheres associated
Chemical Synthesis. Overview. Chemical Synthesis of Nanocrystals. Self-Assembly of Nanocrystals. Example: Cu 146 Se 73 (PPh 3 ) 30
Chemical Synthesis Spontaneous organization of molecules into stable, structurally well-defined aggregates at the nanometer length scale. Overview The 1-100 nm nanoscale length is in between traditional
4 Thermomechanical Analysis (TMA)
172 4 Thermomechanical Analysis 4 Thermomechanical Analysis (TMA) 4.1 Principles of TMA 4.1.1 Introduction A dilatometer is used to determine the linear thermal expansion of a solid as a function of temperature.
Chemical Engineering - CHEN
Auburn University 1 Chemical Engineering - CHEN Courses CHEN 2100 PRINCIPLES OF CHEMICAL ENGINEERING (4) LEC. 3. LAB. 3. Pr. (CHEM 1110 or CHEM 1117 or CHEM 1030) and (MATH 1610 or MATH 1613 or MATH 1617
Size effects. Lecture 6 OUTLINE
Size effects 1 MTX9100 Nanomaterials Lecture 6 OUTLINE -Why does size influence the material s properties? -How does size influence the material s performance? -Why are properties of nanoscale objects
Polymer-Dispersionen
Polymer-Dispersionen Klaus Tauer Definitions Meaning & properties of polymer dispersions Preparation of polymer dispersions Polymer Dispersions Polymer: any of a class of natural or synthetic substances
σ y ( ε f, σ f ) ( ε f
Typical stress-strain curves for mild steel and aluminum alloy from tensile tests L L( 1 + ε) A = --- A u u 0 1 E l mild steel fracture u ( ε f, f ) ( ε f, f ) ε 0 ε 0.2 = 0.002 aluminum alloy fracture
CHARACTERIZATION OF POLYMERS BY TMA. W.J. Sichina, National Marketing Manager
PERKIN ELMER Polymers technical note CHARACTERIZATION OF POLYMERS BY W.J. Sichina, National Marketing Manager Thermomechanical analysis () is one of the important characterization techniques in the field
Controlled release of proteins from self-assembling hydrogels based on oppositely charged dextran microspheres
Controlled release of proteins from selfassembling hydrogels based on oppositely charged dextran microspheres Sophie Van Tomme a Rene van Nostrum a, Stefaan De Smedt b, Wim Hennink a a Department of Pharmaceutics,
INVESTIGATION OF VISCOELASTICITY AND CURE SHRINKAGE IN AN EPOXY RESIN DURING PROCESSING
TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS INVESTIGATION OF VISCOELASTICITY AND CURE SHRINKAGE IN AN EPOXY RESIN DURING PROCESSING T. Shimizu *, H. Koinuma, K. Nagai Mitsubishi Heavy Industries,
Microindentation characterization of polymers and polymer based nanocomposites. V. Lorenzo
Microindentation characterization of polymers and polymer based nanocomposites V. Lorenzo Hardness and hardness measurement Vickers hardness Relationships between hardness and other mechanical properties
Matter, Materials, Crystal Structure and Bonding. Chris J. Pickard
Matter, Materials, Crystal Structure and Bonding Chris J. Pickard Why should a theorist care? Where the atoms are determines what they do Where the atoms can be determines what we can do Overview of Structure
DETERMINATION OF TIME-TEMPERATURE SHIFT FACTOR FOR LONG-TERM LIFE PREDICTION OF POLYMER COMPOSITES
DETERMINATION OF TIME-TEMPERATURE SHIFT FACTOR FOR LONG-TERM LIFE PREDICTION OF POLYMER COMPOSITES K. Fukushima*, H. Cai**, M. Nakada*** and Y. Miyano*** * Graduate School, Kanazawa Institute of Technology
h e l p s y o u C O N T R O L
contamination analysis for compound semiconductors ANALYTICAL SERVICES B u r i e d d e f e c t s, E v a n s A n a l y t i c a l g r o u p h e l p s y o u C O N T R O L C O N T A M I N A T I O N Contamination
Material Deformations. Academic Resource Center
Material Deformations Academic Resource Center Agenda Origin of deformations Deformations & dislocations Dislocation motion Slip systems Stresses involved with deformation Deformation by twinning Origin
What is a mold? Casting. Die casting. Injection Molding Machine. Injection Molding. 2.008 Design & Manufacturing II. Spring 2004
2.008 Design & Manufacturing II What is a mold? From Webster: a cavity in which a substance is shaped: as (1) : a matrix for casting metal (2) : a form in which food is given a decorative shape Spring
POLARIZED LIGHT MICROSCOPE EXAMINATIONS OF ORIENTED POLYMER FILMS
POLARIZED LIGHT MICROSCOPE EXAMINATIONS OF ORIENTED POLYMER FILMS Jenny M. Smith, Criminalist, Missouri State Highway Patrol Crime Lab, Jefferson City, MO Introduction: Much can be gained in the examination
Silicone Rubber Thermal Interface Materials: Applications and Performance Considerations
Silicone Rubber Thermal Interface Materials: Applications and Performance Considerations David C. Timpe Jr. Arlon Silicone Technologies Division 1100 Governor Lea Road, Bear, DE 19701 P: 800-635-9333 F:
Keywords: Planar waveguides, sol-gel technology, transmission electron microscopy
Structural and optical characterisation of planar waveguides obtained via Sol-Gel F. Rey-García, C. Gómez-Reino, M.T. Flores-Arias, G.F. De La Fuente, W. Assenmacher, W. Mader ABSTRACT Planar waveguides
Asian Journal on Energy and Environment
As. J. Energy Env. 2005, 6(04), 193-201 Asian Journal on Energy and Environment ISSN 1513-4121 Available online at www.asian-energy-journal.info Synthesis,Characterization and Application of Single and
Tiangang TM BW-10LD (622)
Tiangang TM BW-10LD Oligomeric Hindered Amine Light Stabilizer (HALS) Poly-(N-β-hydroxyethyl-2,2,6,6-tetramethyl-4-hydroxy-piperidyl-succinate) CAS number 65447-77-0 BW-10LD BW-10LD is a highly effective
X-ray diffraction techniques for thin films
X-ray diffraction techniques for thin films Rigaku Corporation Application Laboratory Takayuki Konya 1 Today s contents (PM) Introduction X-ray diffraction method Out-of-Plane In-Plane Pole figure Reciprocal
Strategy for Functional Material Development in FUJIFILM
証券コード 4901 Strategy for Functional Material Development in FUJIFILM - Global competency strategy for business innovation in Functional Material Industry - Sep. 24, 2013 FUJIFILM Corporation Development
Lösungen Übung Verformung
Lösungen Übung Verformung 1. (a) What is the meaning of T G? (b) To which materials does it apply? (c) What effect does it have on the toughness and on the stress- strain diagram? 2. Name the four main
A Simple Fiber Optic displacement Sensor for Measurement of Light Intensity with the Displacement
A Simple Fiber Optic displacement Sensor for Measurement of Light Intensity with the Displacement Trilochan patra Assistant professor, Department of Electronics and Communication Engineering, Techno India
Coating Technology: Evaporation Vs Sputtering
Satisloh Italy S.r.l. Coating Technology: Evaporation Vs Sputtering Gianni Monaco, PhD R&D project manager, Satisloh Italy 04.04.2016 V1 The aim of this document is to provide basic technical information
Raman spectroscopy Lecture
Raman spectroscopy Lecture Licentiate course in measurement science and technology Spring 2008 10.04.2008 Antti Kivioja Contents - Introduction - What is Raman spectroscopy? - The theory of Raman spectroscopy
Microscopy and Nanoindentation. Combining Orientation Imaging. to investigate localized. deformation behaviour. Felix Reinauer
Combining Orientation Imaging Microscopy and Nanoindentation to investigate localized deformation behaviour Felix Reinauer René de Kloe Matt Nowell Introduction Anisotropy in crystalline materials Presentation
Ultra-high Barrier Plastic. MSE5420 Flexible Electronics Martin Yan, GE Global Research
Ultra-high Barrier Plastic MSE5420 Flexible Electronics Martin Yan, GE Global Research Outline Introduction to plastic substrate and need for barrier Barrier technologies WVTR measurement technologies
METU DEPARTMENT OF METALLURGICAL AND MATERIALS ENGINEERING
METU DEPARTMENT OF METALLURGICAL AND MATERIALS ENGINEERING Met E 206 MATERIALS LABORATORY EXPERIMENT 1 Prof. Dr. Rıza GÜRBÜZ Res. Assist. Gül ÇEVİK (Room: B-306) INTRODUCTION TENSION TEST Mechanical testing
OLED - Technologie der Zukunft
OLED - Technologie der Zukunft Dr. Manfred Weigand MERCK KGaA, Darmstadt, Germany Cleanzone 2014 Cathode Ray Tube (CRT) Source: Peter Littmann Source: Patrick Schindler Source: Bundesarchiv, Bild 183-H0812-0031-001
The Anatomy of a Label
The Anatomy of a Label Three key elements make up a label: face stock, release liner, and adhesive. Face Stock: Face stock is the material of the label that carries the imprint. The print can be applied
Applications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT)
I Applications and Benefits of Multi-Walled Carbon Nanotubes (MWCNT) Table of Content 1 Introduction...1 2 Improved Properties...1 3 Potential Applications...1 3.1 Current / short-term applications...3
Reactive Mesogens. Brighter, Clearer Communication
Reactive Mesogens Brighter, Clearer Communication Statement Merck is the world leader in manufacturing and marketing liquid crystals (LCs). The anisotropic optical behaviour of LCs is the fundamental underlying
International Journal of Multidisciplinary Research and Modern Education (IJMRME) ISSN (Online): 2454-6119 (www.rdmodernresearch.org) Volume I, Issue
STUDIES ON OPTICAL AND STRUCTURAL PROPERTIES OF Ag2S FILMS PREPARED BY CHEMICAL BATH DEPOSITION METHOD Goverdhan Yadu*, K. K. Pathak**, Kusumanjali Deshmukh*** & Mini A. Pateria*** * Govt. Rajeev Lochan
Analytical Testing Services Commercial Price List ManTech International Corporation January 2016
Analytical ing Services Commercial List ManTech International Corporation January 2016 TABLE OF CONTENTS MECHANICAL TENSILE TESTING... 1 DIFFERENTIAL SCANNING CALORIMETRY (DSC)... 2 THERMOMECHANICAL ANALYSIS
Measurement of Residual Stress in Plastics
Measurement of Residual Stress in Plastics An evaluation has been made of the effectiveness of the chemical probe and hole drilling techniques to measure the residual stresses present in thermoplastic
New Transparent High-Barrier Film for Advanced Retort Applications
New Transparent High-Barrier Film for Advanced Retort Applications Tatsuya Oshita KURARAY CO., LTD ABSTRACT KURARISTER TM, which is henceforth called Hybrid film, is a new transparent high-barrier film
Preparation of ZnS and SnS Nanopowders by Modified SILAR Technique
Journal of Physical Sciences, Vol. 13, 009, 9-34 ISSN: 097-8791 : www.vidyasagar.ac.in/journal Preparation of ZnS and SnS Nanopowders by Modified SILAR Technique Department of Physics The University of
Solution for Homework #1
Solution for Homework #1 Chapter 2: Multiple Choice Questions (2.5, 2.6, 2.8, 2.11) 2.5 Which of the following bond types are classified as primary bonds (more than one)? (a) covalent bonding, (b) hydrogen
Near-field scanning optical microscopy (SNOM)
Adviser: dr. Maja Remškar Institut Jožef Stefan January 2010 1 2 3 4 5 6 Fluorescence Raman and surface enhanced Raman 7 Conventional optical microscopy-limited resolution Two broad classes of techniques
Laboratory #3 Guide: Optical and Electrical Properties of Transparent Conductors -- September 23, 2014
Laboratory #3 Guide: Optical and Electrical Properties of Transparent Conductors -- September 23, 2014 Introduction Following our previous lab exercises, you now have the skills and understanding to control
Plastics and Polymer Business. Properties enhancement for Plastics
News Letter Vol. 18, issue October-December, 2012 Hyperdispersants and Coupling Agents for Thermoplastics and Thermosets Solplus, Ircolplus and Solsperse hyperdispersants and coupling agents have been
Basic Properties and Application of Auto Enamels
Basic Properties and Application of Auto Enamels Composition of Ceramic Automotive Glass Enamels Ceramic automotive glass colours are glass enamels that fire on to the glass during the bending process
A STUDY ON BONDING STRENGTH OF POLYMERIC FIBERS TO CEMENTITIOUS MATRIX
CD01-006 A STUDY ON BONDING STRENGTH OF POLYMERIC FIBERS TO CEMENTITIOUS MATRIX H.R. Pakravan 1, M. Jamshidi 2, M. Latifi 3 1 M.Sc. student, Textile Engineering Department, Amirkabir University, Tehran,
Effect of ph on the Size of Gold Nanoparticles
International Journal of Electronic and Electrical Engineering. ISSN 0974-2174, Volume 7, Number 2 (2014), pp. 159-164 International Research Publication House http://www.irphouse.com Effect of ph on the
! 2!!$ ,)!$- %$0. Baskı-2 ! "! #$ % #$#!&'! '! (&&)!! &!! #.! &)!$#$! /&)!!! 0! &)!$!.!! 0$! #! &)!$ &.!!#$!! 3!&!#!!3! #&!'! &! 4!!
" $ % $&' ' (&&) & )*,)$-.&&) &. &)$$ /&) 0 &)$. 0$ &)$ + 2$,)$3&) &.$ 3& 3 &' & 43 '' %$ / %$0 (%(%3 ' '& 4& 40%3 0$& (% 3 *& 0&3$ 5 %40% 4 4 4 7 8&, 40% :&&* 6 9 4-7 "& % 4 )$ 4 & &)$, %&$ ; 8&7&4 3
Spectroscopic Ellipsometry:
Spectroscopic : What it is, what it will do, and what it won t do by Harland G. Tompkins Introduction Fundamentals Anatomy of an ellipsometric spectrum Analysis of an ellipsometric spectrum What you can
07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
07 21 19 STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 7819 Broadview Road Cleveland, OH 44131 800-522-4522 February, 2011 SPEC NOTE: This guide specification is intended for use when specifying
Photolithography. Class: Figure 12.1. Various ways in which dust particles can interfere with photomask patterns.
Photolithography Figure 12.1. Various ways in which dust particles can interfere with photomask patterns. 19/11/2003 Ettore Vittone- Fisica dei Semiconduttori - Lectio XIII 16 Figure 12.2. Particle-size
Unit 12 Practice Test
Name: Class: Date: ID: A Unit 12 Practice Test Multiple Choice Identify the choice that best completes the statement or answers the question. 1) A solid has a very high melting point, great hardness, and
Effects of Tg and CTE on Semiconductor Encapsulants
Effects of Tg and CTE on Semiconductor Encapsulants Dr. Mark M. Konarski Loctite Corporation www.loctite.com Abstract As the role of direct-chip-attachment increases in the electronics industry, the reliability
Chapter Outline. Mechanical Properties of Metals How do metals respond to external loads?
Mechanical Properties of Metals How do metals respond to external loads? Stress and Strain Tension Compression Shear Torsion Elastic deformation Plastic Deformation Yield Strength Tensile Strength Ductility
PIEZOELECTRIC FILMS TECHNICAL INFORMATION
PIEZOELECTRIC FILMS TECHNICAL INFORMATION 1 Table of Contents 1. PIEZOELECTRIC AND PYROELECTRIC EFFECTS 3 2. PIEZOELECTRIC FILMS 3 3. CHARACTERISTICS PROPERTIES OF PIEZOELECTRIC FILMS 3 4. PROPERTIES OF
1. INTRODUCTION ABSTRACT
MultiWave Hybrid Laser Processing of Micrometer Scale Features for Flexible Electronics Applications J. Hillman, Y. Sukhman, D. Miller, M. Oropeza and C. Risser Universal Laser Systems, 7845 E. Paradise
3. Test Methods for Evaluation of ESCR of Plastics
3. Test Methods for Evaluation of ESCR of Plastics A common laboratory request for ESC-prone polymers is to check ESCR performance for quality control, competitive product evaluations, and research and
Mechanical Properties of Metals Mechanical Properties refers to the behavior of material when external forces are applied
Mechanical Properties of Metals Mechanical Properties refers to the behavior of material when external forces are applied Stress and strain fracture or engineering point of view: allows to predict the
Ultrahigh-efficiency solar cells based on nanophotonic design
Ultrahigh-efficiency solar cells based on nanophotonic design Albert Polman Piero Spinelli Jorik van de Groep Claire van Lare Bonna Newman Erik Garnett Marc Verschuuren Ruud Schropp Wim Sinke Center for
Zero Width Glass Cutting with CO 2 Laser
Zero Width Glass Cutting with CO 2 Laser Mohammed Naeem GSI Group, Laser Division Cosford Lane, Swift Valley Rugby [email protected] Introduction Laser cutting of glass in not a novel technique, excellent
Insertion Devices Lecture 4 Permanent Magnet Undulators. Jim Clarke ASTeC Daresbury Laboratory
Insertion Devices Lecture 4 Permanent Magnet Undulators Jim Clarke ASTeC Daresbury Laboratory Introduction to Lecture 4 So far we have discussed at length what the properties of SR are, when it is generated,
High Efficient Casting Machine for Biaxially Oriented Film Manufacturing Plant
107 High Efficient Casting Machine for Biaxially Oriented Film Manufacturing Plant Hideo Kometani Hidetoshi Kitajima Hiroshi Tsuji Takuya Goto Masahiro Yoshizawa (MHI) has made incessant efforts to improve
NANO SILICON DOTS EMBEDDED SIO 2 /SIO 2 MULTILAYERS FOR PV HIGH EFFICIENCY APPLICATION
NANO SILICON DOTS EMBEDDED SIO 2 /SIO 2 MULTILAYERS FOR PV HIGH EFFICIENCY APPLICATION Olivier Palais, Damien Barakel, David Maestre, Fabrice Gourbilleau and Marcel Pasquinelli 1 Outline Photovoltaic today
CARBON/DYNEEMA INTRALAMINAR HYBRIDS: NEW STRATEGY TO INCREASE IMPACT RESISTANCE OR DECREASE MASS OF CARBON FIBER COMPOSITES
26 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES CARBON/DYNEEMA INTRALAMINAR HYBRIDS: NEW STRATEGY TO INCREASE IMPACT RESISTANCE OR DECREASE MASS OF CARBON FIBER COMPOSITES J. G. H. Bouwmeester*,
1.1.2 Polypropylene The polypropylene must be a white opaque film, 1 2 mil thick. Biaxial orientation is preferred.
Library of Congress Preservation Directorate Specification Number 700 704 09 Specifications for Pressure Sensitive Adhesive Labels For Application to Single Paper Sheets and Text Pages of Bound Books For
Silicon-On-Glass MEMS. Design. Handbook
Silicon-On-Glass MEMS Design Handbook A Process Module for a Multi-User Service Program A Michigan Nanofabrication Facility process at the University of Michigan March 2007 TABLE OF CONTENTS Chapter 1...
MOLECULAR DYNAMICS INVESTIGATION OF DEFORMATION RESPONSE OF THIN-FILM METALLIC NANOSTRUCTURES UNDER HEATING
NANOSYSTEMS: PHYSICS, CHEMISTRY, MATHEMATICS, 2011, 2 (2), P. 76 83 UDC 538.97 MOLECULAR DYNAMICS INVESTIGATION OF DEFORMATION RESPONSE OF THIN-FILM METALLIC NANOSTRUCTURES UNDER HEATING I. S. Konovalenko
TENSILE BEHAVIOUR OF OPEN CELL CERAMIC FOAMS
Original papers TENSILE BEHAVIOUR OF OPEN CELL CERAMIC FOAMS LUKÁŠ ŘEHOŘEK*, **, IVO DLOUHÝ*,**, ZDENĚK CHLUP* *Institute of Physics of Materials ASCR, Žižkova 22, 616 62 Brno, Czech Republic **Institute
2. Deposition process
Properties of optical thin films produced by reactive low voltage ion plating (RLVIP) Antje Hallbauer Thin Film Technology Institute of Ion Physics & Applied Physics University of Innsbruck Investigations
Phosphoric Acid Anodized Aluminum Honeycomb
Phosphoric Acid Anodized Aluminum Honeycomb Description 02 and 06 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gauges. The HexWeb CR-PAA
Waterproofing System for Wastewater Tanks in Petrochemical Industries and Refineries
Waterproofing System for Wastewater Tanks in Petrochemical Industries and Refineries Introduction Wastewater of petrochemical industries and refineries contains high amounts of emulsified aliphatic or
Testing and appraisal of Lucobit polymer effect as an additive on asphalt mixture performance
Abstract Testing and appraisal of polymer effect as an additive on asphalt mixture performance Hamid Sabbagh mollahosseini*,golazin Yadollahi**, Ershad Amoosoltani*** *, ***Executive of Engineering and
UNIT I: INTRFERENCE & DIFFRACTION Div. B Div. D Div. F INTRFERENCE
107002: EngineeringPhysics Teaching Scheme: Lectures: 4 Hrs/week Practicals-2 Hrs./week T.W.-25 marks Examination Scheme: Paper-50 marks (2 hrs) Online -50marks Prerequisite: Basics till 12 th Standard
Investigation of the Optical Properties of Liquid Deposition CuSO 4 Thin Film
015 IJSRST Volume 1 Issue 5 Print ISSN: 395-6011 Online ISSN: 395-60X Themed Section: Science and Technology Investigation of the Optical Properties of Liquid Deposition CuSO 4 Thin Film Nafie A. Almuslet
Lapping and Polishing Basics
Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)
Strength of Concrete
Strength of Concrete In concrete design and quality control, strength is the property generally specified. This is because, compared to most other properties, testing strength is relatively easy. Furthermore,
Dimensional Change Characteristics for Printed Circuit Board Films
TECHNICAL DATA / PRINTED CIRCUIT BOARD FILM Dimensional Change Characteristics for Printed Circuit Board Films High Complexity PCB Starts With the Right Phototools October 2010 TI-2530 INTRODUCTION Kodak
Experiment: Crystal Structure Analysis in Engineering Materials
Experiment: Crystal Structure Analysis in Engineering Materials Objective The purpose of this experiment is to introduce students to the use of X-ray diffraction techniques for investigating various types
Materials for Organic Electronic. Jeremy Burroughes FRS FREng
Materials for Organic Electronic Applications Jeremy Burroughes FRS FREng Introduction Organic Thin Film Transistors Organic Solar Cells and Photodiodes All Printed OLED Summary 4k2k 56 Displays Panasonic
TECHNISCHE FICHE - TECHNISCHE FICHE - Chat Board: Classic
- TECHNISCHE FICHE - Chat Board: Classic Classic is a magnetic glass- and writing board for use in modern offices and private homes. CHATBOARD Classic is Danish Design - made in Denmark. Classic is a glass
Automatic and Objective Measurement of Residual Stress and Cord in Glass
Automatic and Objective Measurement of Residual Stress and Cord in Glass GlassTrend - ICG TC15/21 Seminar SENSORS AND PROCESS CONTROL 13-14 October 2015, Eindhoven Henning Katte, ilis gmbh copyright ilis
Development of Optical Wave Microphone Measuring Sound Waves with No Diaphragm
Progress In Electromagnetics Research Symposium Proceedings, Taipei, March 5 8, 3 359 Development of Optical Wave Microphone Measuring Sound Waves with No Diaphragm Yoshito Sonoda, Takashi Samatsu, and
Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
Structural Integrity Analysis
Structural Integrity Analysis 1. STRESS CONCENTRATION Igor Kokcharov 1.1 STRESSES AND CONCENTRATORS 1.1.1 Stress An applied external force F causes inner forces in the carrying structure. Inner forces
Soft lithography for diffractive microfabrications
Soft lithography for diffractive microfabrications Liliana D Amico PhD Section: Materials Engineering XXVIII Cycle (3 Year) Mauro Casalboni, Fabio De Matteis, Paolo Prosposito, Roberta De Angelis Summary
Chapter 4 COATINGS Full Reflective Coatings:
Chapter 4 COATINGS Technical developments in coatings for plastic optics have resulted in optical and durability characteristics once believed possible only with glass. These advances in coating technology
SCENIC VIEW SV 10 SECTION 08 87 13 SOLAR CONTROL FILMS
PART 1 GENERAL SCENIC VIEW SV 10 SECTION 08 87 13 SOLAR CONTROL FILMS 1.1 SUMMARY A. Optically clear dual reflective, neutral sputtered and aluminum metallized polyester film for solar control. 1.2 RELATED
2. The mold is closed up and held under hydraulic pressure while the rubber material or compound cures.
Designing with Rubber Molding Processes Compression Molding Compression molding is the process of placing a pre-load of a rubber material or compound directly in the mold cavity and compressed to the shape
LECTURE SUMMARY September 30th 2009
LECTURE SUMMARY September 30 th 2009 Key Lecture Topics Crystal Structures in Relation to Slip Systems Resolved Shear Stress Using a Stereographic Projection to Determine the Active Slip System Slip Planes
Shake gels based on Laponite PEO mixtures: effect of polymer molecular weight
Designed Monomers and Polymers, Vol. 8, No. 5, pp. 453 462 (2005) VSP 2005. Also available online - www.vsppub.com Shake gels based on Laponite PEO mixtures: effect of polymer molecular weight VOLKAN CAN
TERMS AND CONDITIONS RESEARCH INITIATION FELLOWSHIPS (2 nd Call)
TERMS AND CONDITIONS RESEARCH INITIATION FELLOWSHIPS (2 nd Call) IMDEA Materials Institute (Madrid Institute for Advanced Studies of Materials) is a nonprofit independent research organization promoted
Challenges and. Opportunities of. Digital Printing. Andreas Koch Managing Director Digital Division
Challenges and Opportunities of Digital Printing Andreas Koch Managing Director Digital Division Contents Why digital printing? The Marabu way Ink technologies Case study 2 Why digital printing? You can
