User s Manual. 1. Introduction 2. Product Features 3. System Requirements. 4. Installing IrDA Wireless Connection:

Transcription

1 IrDA Wireless Connection User s Manual 1. Introduction 2. Product Features 3. System Requirements 4. Installing IrDA Wireless Connection 5. Check Driver Installation Result 6. Remove IrDA Wireless Connection 7. Adjust the parameters of the IrDA Wireless Connection (Windows 98se) 1. Introduction Thank you for purchasing our product of IrDA Wireless Connection. IrDA Wireless Connection is an easy-to-use FIR Infrared adapter, which is to be connected to the USB port of the COMPUTER to add the wireless Infrared feature to the system. Wireless File Transfers for Notebooks, Desktop PCs, Digital Cameras, Cellular Phones and more! 2. Product Features Easily enable IrDA function on the PC through USB port USB Plug and Play convenience IrDA data rates from 2.4Kbps to 4Mbps Obtains power from USB port Uses standard IrDA transceivers Full compliance to IrDA 1.3 and USB 1.1 specifications 4Kbyte FIFO buffer memory Support Windows 98, Windows 98 SE, Windows Me, Windows 2000 or Windows XP 3. System Requirements IBM PC or compatible PC with 486DX-100 MHz CPU or higher Available USB port CD-ROM drive At least 16MB of DRAM 4. Installing IrDA Wireless Connection: Follow the steps below on installing the IrDA Wireless Connection software: 1. Insert the driver CD-ROM included the "Setup.exe" file into drive on your computer.

2 2. Run the "Setup.exe" from the drive, and you will see a setup screen as below. 3. Click <Next> to continue installation, and you will get a new window as below. 5. Click <Next> to continue installation, and you will get a new window as below.

3 6. Let Windows copy the needed files to your hard disk. 7. Please complete the installation now by plugging the device into the USB port. If the device is already attached to your USB port, please remove it briefly then reinsert it, your operating system will complete the installation. Click "Finish", and you will get a new window as below.

4 12. Remove any disk from the CD-ROM, then click "Finish" completing setup & restarting your computer. Check Driver Installation Result 1. Move the course on "My Computer" icon as below. Double-click the icon for open "My Computer", you will see "Infrared Recipient"; and then one click the right button of mouse and a pull-down window appears. Select the latest item-"properties".

5 2. Plug IrDA Wireless Connection into computer. You will get a new device under the "Infrared devices" category, who is "Infrared Communication Device" as below.in addition, you can see a Network driver, "SigmaTel USB-IrDA Dongle" be hooked under "Network adapters" category. This item is always there regardless of the dongle. Remove IrDA Wireless Connection : 1. Pull out the IrDA Wireless Connection from the computer at firstly. 2. Secondly, Double click "Add/Remove Programs Properties "from the Control Panel. Pleases select" Sigmatel USB-IR Adapter" from the "Install / Uninstall ". And then, please click " Add/Remove "

6 3. Click "Yes" to uninstall the SigmaTel USB-IR Adapter.

7 Adjust the parameters of the IrDA Wireless Connection (Windows 98se) I recommend you to download and install the newest edition of PC Suite software from internet.(it can support Win XP)because it will make the stability of connection very well. (Only test pass via Nokia 7650 cell phone) We test the connection in five hours with the new parameters of the IrDA Wireless Connection, it keeps the IrDA wireless connection actively all the whole whether you use PC suite or not and transfer data or not. The "Back/Restore" interface images of the newest edition of PC suite software.(it can support Win XP) 1. Please right click the "etwork Neighborhood" icon at desktop. There will appear a popup menu as below, then select " Properties". 2. There will appear a "Network" dialog box, please double click "SigmaTel USB-IrDA Adapter".

8 3. There will appear a "SigmaTel USB-IrDA Adapter Properties" dialog box. Please change the "value" of "Infrared Transceiver Type" as "Vishay 6101E". appear "SigmaTel USB-IrDA Adapter", Please change the "value" of "Infrared Transceiver Type" as "Vishay 6101E" 4. Please change the "Value" of "Min. Turn-Around Time as 5.0mS".

9 4. Please change the "Value" of "Speed Enable" as "115200". 6.- Please click the IrDA icon in the right corner of the status bar 7. There will appear a dialog box as below, please select "Install software for Plug and Play devices within range".

10