BRUTO PRIJSLIJST JULI 2013

Transcription

1 ENCORE MAIN STATIONS / PSU CS Ch. portable headset main station Encore two-channel portable headset main station. Built-in 1-amp (2-amp peak) power supply. Three XLR-3 Male connectors for each partyline A and B, one XLR-3 female for Program Audio in and one XLR-3 Male for Stage Announce out on the rear panel ,00 MS Ch. headset/speaker main station Encore two-channel headset/speaker main station. Built-in 1-amp (2-amp peak) power supply, 1RU rack mount. Three XLR-3 Male connectors for each partyline A and B, one XLR-3 female for Program Audio in and one XLR-3 Male for Stage Announce out on the rear panel. Jack for hot mic out ,00 MS Ch. headset/speaker main station Encore four-channel headset/speaker main station. Built-in 1-amp (2-amp peak) power supply, 2RU rack mount. Four pairs of XLR-3 Male connectors for partylines A-D, one XLR-3 female for Program Audio in and one XLR-3 Male for Stage Announce out on the rear panel. Jack for hot mic out ,00 SB Ch. switchboard main station Encore four-channel switchboard main station. 5 positions X 10 outputs assignment matrix, no speaker. Built-in 1-amp (2-amp peak) power supply, 2RU rack mount. One XLR-3 Male connectors for each partyline A-D; one XLR-3 Male per Partyline output 1-10; one XLR-3 female for Program Audio in and one XLR-3 Male for Stage Announce out on the rear panel. Jacks for hot mic out and external loudspeaker ,00 PS Ch. rack mount power supply Encore two-channel one-amp, (two-amp peak), 1RU rack mount, universal power supply. Two channels X three intercom jacks. One A/B selectable jack and one program input. Three XLR-3 Male connectors for each partyline A and B, and one XLR-3 female for Program Audio in on the rear panel ,00 PS Ch. rack mount power supply Encore four-channel one-amp, two-amp peak, 1RU rack mount system power supply. Four channels X two intercom jacks. One program input, universal power supply. Two XLR-3 Male connectors for each partyline A -D, and one XLR-3 female for Program Audio in on the rear panel ,00 PK-7 Single-Channel 0.4-amp portable power supply 372,00 Encore single-channel 0.4-amp portable power supply module. Includes universal power supply. Three XLR-3 Male connectors for partylines on the rear panel. ENCORE BELTPACKS AND HEADSET STATIONS RS-701 Single-Channel standard beltpack: 378,00 Encore single-channel standard beltpack. Four-pin male headset connector and three-pin female/male loop through intercom line connectors. NEW RS Ch. dual listen monaural beltpack Encore two-channel standard dual listen monaural beltpack four-pin male headset connector. Six-pin female/male loop through intercom line connectors. Requires YC-36 adapter to connect with standard three-pin cabling. 486,00 RS Ch. TW dual listen monaural beltpack Encore two-channel/three-pin dual listen monaural beltpack four-pin male headset connector. Three-pin female/male loop through intercom line connectors. Requires a TWC ,00 HB Ch. flush-mount headset station 432,00 Encore two-channel selectable flush-mount headset station. Mounts in console or standard two-gang electrical box. Includes a Four-pin male headset connector. Pagina 1

2 HB Ch. flush-mount headset station 516,00 Encore four-channel selectable flush-mount headset station. Mounts in console or standard two-gang electrical box. Includes a Four-pin male headset connector. RM Ch. remote station rack mount Encore two-channel 1RU remote station rack mount with internal speaker and ports for gooseneck microphone and/or headset. Must be used in conjunction with a power supply such as a PS-702 or MS ,00 RM Ch. remote station rack mount Encore four-channel 2RU remote station rack mount with internal speaker and ports for gooseneck microphone and/or headset. Must be used in conjunction with a power supply such as a PS-704 or MS ,00 KB Ch. flush-mount headset/speaker station Encore two-channel selectable flush-mount headset/speaker station. Mounts in four-gang box, console, or V-Box accessory enclosure 21.6cm/8.25" X 11.4cm/4.5". Includes a Four-pin male headset connector. 480,00 KB-702GM 2 Ch. flush-mount headset/speaker GN mic Encore two-channel selectable flush-mount headset/speaker station, gooseneck microphone jack and VOX. Mounts in four-gang box, console, or V-Box accessory enclosure 21.6cm/8.25" X 11.4cm/4.5". Includes a Four-pin male headset connector. 689,00 KB-701 Single-Channel flush-mount PTT speaker station Encore single-channel half-duplex flush-mount push-to-talk speaker/microphone station mounts In four-gang box, console, or accessory enclosure 21.6cm/8.25" x 11.4cm/4.5". Includes a Four-pin male headset connector. 480,00 V-BOX Wedge shaped enclosure for KB stations 324,00 Encore portable wedge-shaped enclosure for angled or vertical mounting. Desktop/wall-mount enclosure for KB-701, KB-702GM and KB-702 stations. ENCORE SYSTEM INTERFACES EF-701M 4-wire interface with call signal 917,00 Encore four-wire interface with call signal. Interfaces matrix to a single channel of standard or TW party-line. IF4W4 4 Ch., 4-wire interface Encore four-channel 3/4-wire camera interface. 1RU rack mount provides four discrete Clear-Com to 3-wire or 4-wire interface circuits. Can be used to connect to four different two-wire partyline channels or a single partyline channel with four 4-wire connections ,00 TW-12C CC/RTS system interface 1.318,00 Clear-Com/RTS system interface - 1RU rack mount. Interface a single intercom channel. Clear-Com to Clear-Com or Clear-Com to RTS systems. TW-47 2-way radio interface 624,00 Clear-Com/RTS two-way radio interface connects Clear-Com or RTS to most two-way radios. A custom interface cable will be required and is not provided. ENCORE IFB SYSTEM INTERFACES PIC-4704 IFB central controller 1.336,00 Encore IFB main station 1RU rack mount. Requires MA-704/AX-704 controllers and IC-25-6 cable or similar and power supply such as the PS-702. MA-704 IFB control panel mic jack Encore IFB control panel with 6.35mm/1/4" microphone jack, four individual talent buttons and "All" talk button. For use with the PIC See the optional CEP-RK console for rack mounting ,00 Pagina 2

3 AX-704 IFB expansion control panel 791,00 Encore IFB expansion control panel with four individual talent buttons. For use with the PIC-4704 and MA-704. See the optional CEP-RK console for rack mounting. TR-50 Monaural IFB talent receiver 214,00 Wired monaural IFB talent receiver 3.5mm/1/8" mini jack includes TS-1. Requires a Clear-Com PSU. See also CC-010 earpiece. CEP-RK Rack kit for MA-704 and AX ,00 1RU rack mount kit for MA-704 and AX-704 control panels. Holds up to three IFB control panels. TS-1 Monaural talent earphone 56,00 Monaural talent earphone. Monaural IFB talent earphone. Plugs into TR-50 and wireless IFB receivers. YC-66 Y adapter for IFB systems 154,00 Six-pin Y adapter for IFB systems. Two six-pin female connectors wired to one six-pin male. QUE-COM INTERCOM COMPONENTS SMQ-1 Que-Com single-ear headset/beltpack 312,00 Que-Com double-ear headset/beltpack combination. SP-3 3-way intercom line splitter 93,00 Three-way intercom line splitter. One three-pin female and three three-pin male XLR-type connectors. BROADCAST AUDIO PRODUCTS AB-120 Commentator/translation console 1.528,00 On-air announcer box, no 4-wire interface, no 48V phantom power. PROGRAMMABLE SOURCE-ASSIGNMENT PANEL RCS x24 Ch. program station assignment panel Eight 24-channel programmable station-assignment panel. Stores 14 presets and expandable up to 15 sources and 72 destinations. Assigns 24 stations or groups to one of eight party-line channels. 2RU rack mount. See also RCS-WIN software (free of charge) ,00 ENCORE SYSTEM ACCESSORIES FL-7 Call signal flasher 438,00 Encore call signal flasher provides adjustable visual and/or audible indication of a call signal. WP-2 2 Ch. selectable intercom outlet 75,00 Encore channel selectable intercom outlet wall plate. Three-pin male connector and channel select switch on a single-gang wall plate. WP-6 2 Ch. 6-pin intercom outlet 105,00 Two-channel six-pin intercom outlet wall plate six-pin male connector on a single-gang wall plate for RS-602. YC-36 2 Ch. beltpack adapter 117,00 Three-pin to six-pin adapter combines two single-channel three-pin cables into a single two-channel six-pin connector for use with RS-602 beltpacks. TWC-701 TW adaptor module Two-channel/three-pin XLR adapter module. Combines two intercom channels onto a single three-pin cable for use with RS-603 beltpacks. Connect up to fifteen RS-603 beltpacks to TWC-701 output. 444,00 Pagina 3

4 MT-1 Isolator PCB for PL interface 252,00 Isolator circuit card for party-line intercom systems. Electrically isolates ground, power and signaling between two systems. GM-9 9 inch plug-in GN mic 227, cm/9" plug-in gooseneck microphone for party-line stations, i-series and ICS panels. GM inch plug-in GN mic 239, cm/18" plug-in gooseneck microphone for party-line stations, i-series and ICS panels. HELIXNET DIGITAL NETWORKED PARTYLINE HMS-4X HelixNet digital 4 Ch. main station HelixNet digital four-channel headset/speaker main station - supports up to 20 HBP-2X beltpacks. Three rear panel expansion bays accept up to three (optional) interface modules. Uses optional 110/340 series gooseneck microphones. High-contrast OLED display per channel ,00 HBP-2X HelixNet digital 2 Ch. beltpack HelixNet digital two-channel standard dual listen monaural beltpack with display and four-pin male headset connector. Three-pin female/male loop through intercom line connectors. High-contrast OLED display ,00 HLI-4W2 HelixNet 4-wire module 1.073,00 4-wire interface module. Dual channel 4-wire interface with transformer balancing. HLI-2W2 HelixNet 2-wire module 2-wire Clear-Com/RTS dual party-line interface module. Does not power the party-lines attached to HLI-2W2 modules. These require Encore master station PSUs such as the PS-702 or MS-702 or RTS equivalent power supply ,00 HLI-ET2 HelixNet Ethernet module: 659,00 Ethernet interface module. Dual channel Ethernet for LAN connectivity. HLI-FBS HelixNet Fiber module: 659,00 Fiber interface module. SFP Fiber connector module DIGITAL WIRELESS - HME DX BASESTATIONS (2.4GHZ) CZ11400 MB100 base station 1.526,00 Base station with 115/230VAC power supply, 115VAC power cord, base battery sled, 2 antennas, and manual CZ11461 BS121 base station 1.952,00 Base station with HS-XLR4F Interface cable, 115/230VAC power supply, 115VAC power cord, 2 antennas, and manual CZ11398 BS200 base station 3.795,00 License-free base station with 115/230VAC power supply, 115VAC power cord, 2 antennas, and manual CZ11516 BS210 base station 4.514,00 DX210 license-free base station w/2 antennas. 115/230 VAC power supply. Includes 115 VAC power cord and manual. CZ11467 MB300ES base station 3.123,00 License-free base station with 115/230VAC power supply, 115VAC power cord, two AA battery sleds, two antennas, interconnect cable, and manual DIGITAL WIRELESS - HME DX COMM CZ11360 BP200 beltpack + 2 BAT41, pouch 802,00 Beltpack with 2 BAT41 batteries, pouch Pagina 4

5 CZ11392 WH200 wireless headset + 2 BAT41 827,00 All-In-One Wireless Headset with 2 BAT41 batteries, headstrap CZ11517 BP210 beltpack + 2 BAT41, pouch 1.022,00 Two-Channel Belt pack with 2 BAT41 batteries and pouch. For use with the DX210 base station. CZ11518 WH210 wireless headset + 2 BAT ,00 All-In-One Wireless Headset with 2 BAT41 batteries, headstrap. For use with the DX210 base station. CZ11408 BP300 beltpack + 1 BAT41, pouch 391,00 Beltpack with 1 BAT41 battery, and pouch CZ11407 WH300 wireless headset + 1 BAT41 576,00 All-In-One Wireless Headset with 1 BAT41 battery, and headstrap DIGITAL WIRELESS - HME DX HEADSETS CZ11450 HS15 headset 188,00 Single muff noise-canceling headset, Electret mic, with Mini DIN connector. CZ11451 HS15D headset 314,00 Double muff noise-canceling headset Electret mic, with Mini DIN connector CZ11452 HS16 headset 149,00 Single muff lightweight headset with directional Electret mic. Mini DIN connector. CZ11453 HSI6000 headset adapter 86,00 2.5mm Headset Adapter for BP200 Beltpack and BP300 Beltpack CZ11454 HS4-3 earpiece and lapel mic 88,00 Earpiece & lapel (clip-on) Electret mic G MD-XLR4M adapter 86,00 Adapter Cable for use with Clear-Com 4-pin XLR4F terminated dynamic headset with DX Mini DIN headset connector G MD-XLR4F adapter 86,00 Adapter Cable for using XLR4M terminated dynamic headset with DX Mini DIN headset connector G MD-XLR5F adapter 86,00 Adapter Cable for using XLR5M terminated dynamic headset with DX Mini DIN headset connector DIGITAL WIRELESS - HME DX ACCESSORIES 647G006 DX antenna splitter/combiner 122,00 2-Way Antenna Splitter/Combiner G RMK200 mounting kit 146,00 1RU Mounting Panel for base antennas, includes two 2' cables G DX 6' remote antenna kit 1,8m Single 6 foot (1.8m) RP-TNC jack to RP-TNC plug cable with right angle bracket for remote base antenna on DX base stations, two kits are required to remote both antennas 90,00 G DX 30' remote antenna kit 7,7m Single 30 foot (7.7m) RP-TNC jack to RP-TNC plug cable with right angle bracket for remote base antenna on DX base stations, two kits are required to remote both antennas 129,00 Pagina 5

6 BAT41 rechargeable battery 50,00 Battery, Li-ion rechargeable, for BP200/210/300 beltpacks and WH200/210/300. CZ11378 AC40A 4-bay battery charger 647,00 Battery charger, 4-port quick charger w/adapter, 115/230 VAC, power cord for BAT41 batteries. DIGITAL WIRELESS - TEMPEST2400 (2.4 GHZ) CM-244 Tempest Ch. BaseStation Tempest 2.4 GHz four-channel, full feature license-free Basestation. Including AC power cord, USB cable, 6ft programming cable with?" (3.5mm) straight mini-jack connector, two whip antennas and T-desk software. Supports up to five wireless BeltStations in normal mode and unlimited BeltStations in shared and split modes. Seamless roaming capable ,00 CM-222 Tempest Ch. BaseStation Tempest 2.4 GHz two-channel, full feature license-free Basestation. Including AC power cord, USB cable, 6ft programming cable with?" (3.5mm) straight mini-jack connector, one whip antenna and T-desk software. Supports up to five wireless BeltStations in normal mode and unlimited BeltStations in shared and split modes. Seamless roaming capable ,00 CB-222 Tempest Ch. MasterBelt Tempest 2.4 GHz 2 channel, dual-listen wireless Master Beltstation as a mobile base station. Allows up to five Normal Mode (CP-222) BeltStations and unlimited Shared Mode BeltStations, to connect to a single BeltStation which acts as base station, 4-PIN male XLR, program port and USB connector. Comes with USB cable, 1/8" stereo mini programming cable, 2000mAh Li-Poly rechargeable battery and multi-blade international wall charger. Does not require a base station to function and will not pair with a base station ,00 CP-242 Tempest Ch. BeltStation Tempest 2.4 GHz four-channel, dual listen wireless BeltStation, four-pin male XLR, program port and USB connector. Including Li-poly rechargeable battery and AC USB wall charger. Seamless roaming capable ,00 CP-222 Tempest Ch. BeltStation Tempest 2.4 GHz two-channel, dual listen wireless BeltStation, four-pin male XLR, program port and USB connector. Including Li-poly rechargeable battery and AC USB wall charger. Seamless roaming capable ,00 CCT-RT Tempest remote transceiver Tempest 2.4 GHz Remote Antenna Transceiver. Power provided by Tempest 2400 base station via CAT-5 cable up to 457m/1500ft. Including 4.5m/15ft CAT-5 cable and two whip antennas. Utilizing the remote transceiver disables the antennas at the base ,00 CCT-RT-EX Tempest 2400 Remote Antenna Line Extender 1.181,00 Extends distance of CCT-RT, and CCT-9RT, up to 3000 feet, can use 3 in parallel for a maximum distance of 5000 ft, includes AC adapter. SG-100 Tempest2400 ZSync dongle Tempest ZSync dongle. For use with base stations with Radio version 1.18 or later. Allows a zero synchronization reference to enable Nomad Seamless Roaming and to improve performance of multi-base systems in non-roaming applications. Includes integrated 5VDC wall power supply. 474,00 Pagina 6

7 SG-120 Tempest2400 Parallel ZSync generator Tempest parallel ZSync generator. For use with base stations with Radio version 1.18 or later. Allows a zero synchronization reference to enable Tempest2400 Seamless Roaming and to improve performance of multi-base systems in non-roaming applications. Provides 12 parallel ZSync feeds. Multiple Parallel ZSync generators may be linked for larger system configuration. 1RU rack mount, Includes AC power cord ,00 T-BC5A Tempest 5-bay battery charger 893,00 Tempest five-bay battery charger for charging lithium-polymer batteries outside of the BeltStation. T-LP1 Tempest Li-Poly battery 119,00 Lithium polymer battery for Tempest BeltStations. DIGITAL WIRELESS - FREESPEAK (1.9GHZ) FREESPEAK-BASE FreeSpeak 1.89 GHz digital wireless base station ,00 FreeSpeak Digital license-free wireless base station. Supports up to 20 Beltpacks and 10 antennas. (Two antennas can connect to the base station directly or up to 10 antennas can be connected by using two x PD2203 splitters) The base station has connections for two party-lines and four 4-wires plus a dedicated SA output and dedicated program audio input. FS-BP FreeSpeak digital wireless beltpack Digital wireless beltpack including two talk and listen keys with integral crosspoint level rotary controls and answerback/menu key. LED level and call signalization and LCD menu. Including XLR-4M headset connector, PC set-up and DC charging connections, protective case, belt clips, shoulder strap, rechargeable batteries, battery sled and single AC charger ,00 PD2201 FreeSpeak active antenna 1.666,00 Active antenna, one supports up to five beltpacks. More antennas needed if roaming or more beltpack support is required. Including PSU. PD2203 FreeSpeak antenna splitter Antenna splitter box. Provides five antenna feeds from one antenna port on the FreeSpeak/CellCom-base station or FreeSpeak/CellCom Integra rear card. Including PSU ,00 DIGITAL WIRELESS - FREESPEAK ACCESSORIES BAT FreeSpeak beltpack battery pack 60,00 Spare battery pack including 4 AA rechargeable batteries. CEL-FS-CHRGR FreeSpeak 5-way battery clip charger 683,00 FreeSpeak/CellCom battery clip charger. The units houses and charges five battery clips. ANALOG UHF - HME PRO850 BELTPACKS CZ BP850 2 Ch. beltpack, band 9/1 BP850 Single or dual channel beltpack with battery sled and antennas, TX Band 9: MHz. For use with the BS850 base station, Band 1. For dual band operation you must order Dual Receiver Module 1.351,00 CZ11427-A1 BP850 2 Ch. beltpack, band A/2 BP850 Single or dual channel beltpack with battery sled and antennas, TX Band A: MHz. For use with the BS850 base station, Band 2. For dual band operation you must order Dual Receiver Module 1.351,00 Pagina 7

8 CZ11427-C1 BP850 2 Ch. beltpack, band C/4 BP850 Single or dual channel beltpack with battery sled and antennas, TX Band C: MHz. For use with the BS850 base station, Band 4. For dual band operation you must order Dual Receiver Module 1.351,00 CZ BP850 2 Ch. beltpack, dual talk/listen, band 9/1 BP850 Two-Channel dual band beltpack with battery sled and antennas, TX Band 9: MHz. For use with the BS850 base station, Band 1. Dual band receiver module installed ,00 CZ11427-A2 BP850 2 Ch. beltpack, dual talk/listen, band A/2 BP850 Two-Channel dual band beltpack with battery sled and antennas, TX Band A: MHz. For use with the BS850 base station, Band 2. Dual band receiver module installed ,00 CZ11427-C2 BP850 2 Ch. beltpack, dual talk/listen, band C/4 BP850 Two-Channel dual band beltpack with battery sled and antennas, TX Band C: MHz. For use with the BS850 base station, Band 4. Dual band receiver module installed ,00 ANALOG UHF - HME PRO850 BASESTATIONS CZ BS850 base station w/ 2 transmitters, band ,00 BS850 Two-Channel base station with 2 Transmitter 4 Receiver power supply, power cord, antennas, Transmit Band: 1 ( MHz) CZ BS850 base station w/ 2 transmitters, band ,00 BS850 Two-Channel base station with 2 Transmitter 4 Receiver power supply, power cord, antennas, Transmit Band: 2 ( MHz) CZ BS850 base station w / 2 transmitters, band ,00 BS850 Two-Channel base station with 2 Transmitter 4 Receiver power supply, power cord, antennas, Transmit Band: 4 ( MHz) CZ BS850 base station w/ 1 transmitter, band ,00 BS850 Single-Channel base station with 1 Transmitter 4 Receiver power supply, power cord, antennas, Transmit Band: 1 ( MHz) CZ BS850 base station w/ 1 transmitter, band ,00 BS850 Single-Channel base station with 1 Transmitter 4 Receiver power supply, power cord, antennas, Transmit Band: 2 ( MHz) CZ BS850 base station w/ 1 transmitter, band ,00 BS850 Single-Channel base station with 1 Transmitter 4 Receiver power supply, power cord, antennas, Transmit Band: 4 ( MHz) ANALOG UHF - HME PRO850 HEADSETS CZ11458 HS15 Single-muff headset, 4F 222,00 Single Muff Noise canceling Headset with 4-pin female connector for use with HME PRO850 or traditional Clear-Com connectors CZ11459 HS15D Dual-muff Headset, 4F 311,00 Double Muff Noise canceling Headset with 4-pin female connector for use with HME PRO850 or traditional Clear-Com connectors ANALOG UHF - HME PRO850 ACCESSORIES G RAK850 remote kit 136,00 Ground Plane Adapter for one BS850 base station antenna with 30' of cable G RMK850 mounting kit 126,00 1RU panel for mounting BS850 base station antennas, with 2' of cable Pagina 8

9 G BAT850 NiMH battery 80,00 7.2V 2100mAH NiMH rechargeable battery for BP850 beltpack, MB100 base station, MB300ES base station and WS200 Speaker Station G BAT850 NiMH battery 80,00 7.2V 2100mAH NiMH rechargeable battery for BP850 beltpack, MB100 base station, MB300ES base station and WS200 Speaker Station CZ11484 AC850A charger 4-bay 1.078,00 4 Port charger for BAT850 batteries, power supply, cord and manual ANALOG UHF - WBS BASE STATIONS WBS-670/A2 Single-Channel wireless UHF base station, band A ,00 Single-channel frequency-agile UHF wireless intercom base station band A2. Tx: MHz Rx: MHz. WBS-670/B4 Single-Channel wireless UHF base station, band B ,00 Single-channel frequency-agile UHF wireless intercom base station band B4. Tx: MHz Rx: MHz. WBS-680/A2 2 Ch. wireless UHF base station, band A ,00 Two-channel frequency-agile UHF wireless intercom base station band A2. Tx: MHz Rx: MHz. WBS-680/B4 2 Ch. wireless UHF base station, band B ,00 Two-channel frequency-agile UHF wireless intercom base station band B4. Tx: MHz Rx: MHz. WBS-680/E88 2 Ch. wireless UHF base station, band E ,00 Two-channel frequency-agile UHF wireless intercom base station band E88. Tx: MHz Rx: MHz. ANALOG UHF - WBS TRANSCEIVER BELTPACKS WTR-670/A2 Single-Channel wireless UHF transceiver, band A ,00 Single-channel frequency-agile UHF wireless intercom beltpack. Tx: MHz Rx: MHz. WTR-670/B4 Single-Channel wireless UHF transceiver, band B ,00 Single-channel frequency-agile UHF wireless intercom beltpack. Tx: MHz Rx: MHz. WTR-680/A2 2 Ch. wireless UHF transceiver, band A ,00 Two-channel frequency-agile UHF wireless intercom beltpack. Tx: MHz Rx: MHz. WTR-680/B4 2 Ch. wireless UHF transceiver, band B ,00 Two-channel frequency-agile UHF wireless intercom beltpack. Tx: MHz Rx: MHz. WTR-680/E88 2 Ch. wireless UHF transceiver, band E ,00 Two-channel frequency-agile UHF wireless intercom beltpack. Tx: MHz Rx: MHz. ANALOG UHF - WBS ACCESSORIES WTR-BAT Rechargeable battery pack WTR-670/ ,00 Rechargeable battery pack for WTR-670 or WTR-680 beltpack. WTR4C-E 4-bay charger for WTR-BAT 1.906,00 50/60Hz power supply including Euro AC connector battery charger for four WTR-BAT rechargeable batteries, 220V and four WTR-BAT rechargeable batteries. Pagina 9

10 HEADSETS AND ACCESSORIES CC-300-X4 Single-ear standard HS XLR-4F Single enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom, includes HS-ES ear sock and headset bag - field removable four-pin female XLR for standard Clear-Com connection. 348,00 CC-400-X4 Double-ear standard HS XLR-4F Double enclosed ear headset with superior audio quality and on/ off switch in gooseneck microphone boom includes HS-ES ear socks and headset bag- field removable four-pin female XLR for standard Clear-Com connection. 414,00 CC-010A IFB Ear Set (mini-jack) 90,00 IFB Ear Set Includes Audio Driver, Coiled Acoustic Ear tube with Clothing Clip, 5 Ft (1.5m) cable with?" (3.5mm) Straight Mini-jack Connector. Replaces CC-010. CC-25 Single-ear light headset (mini-jack) 184,00 Single open ear lightweight around-the-ear mounted headset. Including 2.5mm/0.1" mini-jack for use with RS-600-Series Beltpacks only. CC-26K-X4 Single-ear light headset XLR-4F 239,00 Single open ear lightweight headset - four-pin female XLR for standard Clear-Com connection. CC-27 Wrap-around light headset XLR-4F 178,00 Single ear bud, wrap around rear worn headset - four-pin female XLR for standard Clear-Com connection. CC-40 Single-ear economy headset XLR-4F 191,00 Single enclosed ear economy headset - four-pin female XLR for standard Clear-Com connection. Optional earsock covers (ES-1) are recommended. CC-60 Double-ear economy headset XLR-4F 227,00 Double enclosed ear economy headset - four-pin female XLR for standard Clear-Com connection. Optional earsock covers (ES-1) are recommended. PT-7 Push-to-talk handheld mic XLR-4F 148,00 Push-to-talk handheld microphone - four-pin female XLR for standard Clear-Com connection. HS-6 Telephone-style handset XLR-4F 172,00 Telephone-style handset with coiled cord and push to talk button on telephone handset- four-pin female XLR for standard Clear-Com connection. Pagina 10