Alcatel OmniPCX Enterprise

Size: px

Start display at page:

Download "Alcatel OmniPCX Enterprise"

Samson Hardy
8 years ago
Views:

1 Alcatel OmniPCX Enterprise VoIP board IP configuration Maintenance 1 OBJECTIVE: Check the IP configuration of the different VoIP boards

2 VoIP board IP configuration Example with an INTIPA board cplstat 0 9 (1) Logic coupler type : INTIPA (70); MAO coupler type : INTIPA ; Coupler state : IN SERVICE ; Protocol country : FRA ( 5); Ghost equipment number : ; First terminal number : 0 ; Last terminal number : 1 ; Specific data of the INT boards Opposite crystal : 3 Opposite coupler : 6 Role part : 2 State of the link : 1 Signalling transmission mode : 0 Used TS : 0 Specific data of the IP boards Board IP address (IPv4) : Netmask IP : Default Gateway IP address : Board Ethernet Address : 00:80:9f:53:11:99 IP quality of service : 3 Current base UDP port : 0 Base UDP port for next initialization : Compression available for Gateway : 8 2 (1) The cplstat IP information corresponds to the the mao database information For the INTIPA and GA boards, this information is configured in MAO and sent to the board for its initialization For the INTIPB and GD board, this information is sent to the CS at the end of the board initialization (the corresponding IP configuration can be set up by the onboard menu or by a DHCP server)

Signalling transmission mode : 0 Used TS : 0 Specific data of the IP boards Board IP address (IPv4) : 15

3 view (check the IP configuration in service mode) Coupler in Application Process Current Configuration : VoIP board IP configuration Onboard command (INTPB) IP Configuration Mode MAC Address : Static : 00:80:9F:04:44:70 Static IP Address : Static IP Subnet Mask : Static IP Default Router : Static IP TFTP Server 1 : Static IP TFTP Server 2 : CPU Address : Redundant CPU Address : CPU1 Physical Address : CPU2 Physical Address : SCS Physical address : SCS timer : 0 Use 802 : No VlanId : 0 Priority : 5 Use Diff Serv : No DSCP : 0 Duplex Mode : Half Duplex 3

1. 1. 3 Static IP TFTP Server 2 : 255.255.255.255 CPU Address : 151. 1. 1. 3 Redundant CPU Address : 151. 1. 2. 37 CPU1 Physical Address : 151. 1. 1. 1 CPU2 Physical Address : 151.

4 VoIP board IP configuration INTIPB (CS server point of view) intpstat cr 3 Coupler INTIPB cr 3, cpl 6, Ghost Eqt IP Address : Netmask : Gateway Address : Mac Address : 00:80:9f:04:44:70 Sign. Ip Term. Load : 0 Sign. IRC. Load : 1 Domain IP : 0 Local IP Version : IPV4 IP QoS Category : 3 Embedded Ethernet : NO Max Comp Allowed : 32 INTER ACT LINK : cr opp : 0 cpl opp : 9 status int : MAIN link_right : UP used_ts : 0 bkup access nb. : 255 bkup Ts nb. : 255 volume_system : 1 local_volume : 0 4

Load : 1 Domain IP : 0 Local IP Version : IPV4 IP QoS Category : 3 Embedded Ethernet : NO Max Comp Allowed : 32 INTER ACT LINK : cr

5 VoIP board IP configuration INTIPB (CS server point of view) intpstat cr 3 (cont.) See Intip A structure for cr 3 cpl 6 (y/n)? y Coupler INTIPA cr 0, cpl 9, Ghost Eqt IP Address : Netmask : Gateway Address : Mac Address : 00:80:9f:53:11:99 Sign. Ip Term. Load : 1 Sign. IRC. Load : 1 Domain IP : 0 Local IP Version : IPV4 IP QoS Category : 3 Embedded Ethernet : NO Max Comp Allowed : 8 INTER ACT LINK : cr opp : 3 cpl opp : 6 status int : INT_A link_right : UP used_ts : 0 bkup access nb. : 255 bkup Ts nb. : 255 volume_system : 1 local_volume : 0 INTIPA list inter act link : No link 5

6 6

1 PC to WX64 direction connection with crossover cable or hub/switch

1 PC to WX64 direction connection with crossover cable or hub/switch If a network is not available, or if it is desired to keep the WX64 and PC(s) completely separated from other computers, a simple network