LIST OF DISPOSABLE PLANTS & MACHINARIES LYING AT HOWRAH WORKS
|
|
- Joel Harris
- 8 years ago
- Views:
Transcription
1 Enclosure-I LIST OF DISPOSABLE PLANTS & MACHINARIES LYING AT HOWRAH WORKS Group Machines in the Group QTY. Group Reserve (In If Bidding For, State "YES" EMD Submitted (In AA Hydraulic Pump Cap: 100 gpm 1 1,75, , AB1) 20 Spindle Drill, SL.No , Cap.50mm 1 AB AB2) 20 Spindle Drill, SL.No , Cap.50mm 4 5,79, , AB3) Radial Drill Machine Cap: 1inch 1 AC Asquith Radial Drill Cap: mm 13 8,10, , AD Shearing Machine Cap : 3.15 x 1500 mm 1 3,00, , AE1) Double acting drop stamp Hammer Cap: 4 Ton 1 AE 5,12, , AE2) Pneumatic Hammer (Steam Hammer) Cap:18 CW 1 AF1) Old Circular SAW Machine Cap: 24 Inch. 1 AF AF2) Circular Saw Machine (with Motor) 1 3,09, , AF3) Circular Saw Machine (with Motor) 1 AG1) Drilling Machine Cap: 1 Inch 1 AG AG2) Drill Machine Cap: 1 inch 1 2,31, , AG3) W.Aquith Drill Machine (Cap.1 inch.) 1 AH1) Lathe Machine Cap: 8ft. Bed 1 AH2) Landis Lathe Machine Cap: 1 inch 1 AH AH3) Lathe Machine Cap: 5ft.Bed 1 3,42, , AH4) Old Lathe Machine Cap: 4ft.Bed 1 AH5) Old Lathe Machine Cap: 8ft.Bed 1 TOTAL EMD VALUE OF THE PAGE 1,62, Enclosure-I
2 LIST OF DISPOSABLE PLANTS & MACHINARIES LYING AT HOWRAH WORKS Group Machines in the Group QTY. Group Reserve (In If Bidding For, State "YES" EMD Submitted (In AI Stone Crusher Machine 1 1,50, , AJ1) Water Hydraulic Press Cap: 150 Ton 1 AJ2) Hydraulic Punching Machine 1 AJ 2,01, , AJ3) Hydraulic Punching Machine 1 AJ4) Punching Machine 1 AK1) Milling Machine 1 AK AK2) Milling Machine 1 2,32, , AK3) Milling Machine 1 AL1) Planning Machine 1 AL 5,80, , AL2) Planning Machine 1 AM1) Milling Machine 1 set 2 AM 5,07, , AM2) Milling Machine 1 set 2 AN Squeezer machine 1 1,77, , TOTAL EMD VALUE OF THE PAGE 92, Enclosure-I LIST OF DISPOSABLE PLANTS & MACHINARIES LYING AT HOWRAH WORKS Group Machines in the Group QTY. Group Reserve (In If Bidding For, State "YES" EMD Submitted (In
3 AO1) Lathe Machine (Cap: 6ft. Bed) 1 AO AO2) Lathe Machine (Cap: 6ft. Bed) 1 2,22, , AO3) Lathe Machine (Cap: 4ft. Bed) 1 AP1) Lathe Machine (Cap: 6ft. Bed) 1 AP AP2) Lathe Machine (Cap: 6ft. Bed) 1 2,78, , AP3) Lathe Machine (Cap: 8ft. Bed) 1 AQ1) Hobbing Machine 1 AQ AQ2) Turret Lathe Machine (Cap. 8ft. Bed) 1 3,08, , AQ3) Vertical Boring Machine 1 AR1) Coles Crane (Cap. 12 Ton) 1 AR 5,40, , AR2) Steam Crane (Cap. 3 Ton) 1 AS Transformer (Cap.500KVA) 1 90, , TOTAL EMD VALUE OF THE PAGE 71, Enclosure-I LIST OF DISPOSABLE PLANTS & MACHINARIES LYING AT HOWRAH WORKS Group Machines in the Group QTY. Group Reserve (In If Bidding For, State "YES" EMD Submitted (In AT DC Generator (Cap. 120V) 1 7,15, , AU Diesel Generator(Cap. 380KVA) 2 4,30, ,500.00
4 AV1) Station Wagon (Cap. 6- sitter) 1 AV2) Ambassador Car (Cap. 5 -sitter) 1 AV AV3) Ambassador Car (Cap. 5 -sitter) 1 2,57, , AV4) Maruti Car (Gypsi) (Cap. 7-Sitter) 1 AV5) Station Wagon (Cap. 6- Sitter) 1 AW1) S.F. Wheel Abrator (Double Tray) Shot Blasting Machine 1 (Cap. 1 Ton) AW 2,83, , AW2) S.F. Wheel Abrator Shot Blasting Machine (Cap. 1 Ton) 1 AX Hydraulic Load Testing Machine 1 1,94, , AY1) Edcon Sand Mixer Machine (Old) 1 AY 2,54, , AY2) Sand Slinger Machine with Accessories 1 AZ Portable Diesel Screw Compressor 8.5m³ 1 1,60, , TOTAL EMD VALUE OF THE PAGE 1,14, GRAND TOTAL OF EMD VALUE (ENCLOSURE-I) 4,41,850.00
5 Enclosure-II LIST OF DISPOSABLE PLANTS & MACHINARIES LYING AT BURNPUR WORKS Group Machines in the Group Qty Group Reserve (In If Bidding For, State "YES" EMD Submitted (In BA1) VERTICAL DRILL ALZMETAL MAKE 1 BA BA2) RADIAL DRILL ASQUITH MAKE 1 3,23, , BA3) VERTICAL DRILL KW 1 BA4) SHAPING M/C ORMED 1 BB BB1) HYDRAULIC MILLING HORIZONTAL 1 6,00, , BB2) HYDRAULIC MILLING WITH MOTOR 1 BC BC1) HYDRAULIC PRESS HENERY BERRY 40 TON 1 3,90, , BC2) HYDRAULIC PRESS 40 TON 1 BD1) TURRET LATHE SWIFT 1 BD BD2) TURRET LATHE SWIFT 1 4,10, , BD3) TURRET LATHE SWIFT 1 BE SHEARING M/C HENERY BERRY 1 4,50, , BF SHEARING M/C HENERY BERRY 1 4,50, , BG1) AMBASSADOR CAR MARK-II WMJ BG2) AMBASSADOR CAR MARK-II WGJ BG BG3) PREMIUM ROAD MASTER 22 SEAT WMC , , BG4) DIESEL JEEP WMP BG5) BI-CYCLE 1 BH TOTAL EMD VALUE FOR THE PAGE (ENCLOSURE-II) BH1) SCHOOL BUS WB-37A-1380 (48 SEAT) 1 BH2) SCHOOL BUS WMJ-569 (62 SEAT) 1 1,80, , ,44,128.00
6 LIST OF DISPOSABLE PLANTS & MACHINARIES LYING AT BURNPUR WORKS Enclosure-III Group Machines in the Group Qty Group Reserve (in If Bidding For, State "YES" EMD Submitted (In CA AUTO EXCHANGE BATTERY ELIMINATOR 2 15, CB1) 1 NO CHAIN CONVEYOR FURNACE 1 CB 5,40, , CB2) 1 NO CHAIN CONVEYOR FURNACE 1 CC1) SPRING BUCKLE PRESS WITH MOTOR "H / BARRY" 1 CC2) HORIZONTAL SCRAGGING PRESS "LEADS ENGG. & HYDRAULIC" 1 CC CC3) COMPRESSOR PUMP UNIT FOR M/C NO. 934 "HYNY BERRY" 1 7,03, , CC4) COMPRESSOR PUMP UNIT FOR M/C NO. 934 "HENRY/BERRY" 1 CC5) HYDR. POWER UNIT FOR 40 TON L.E.H SCRAGGING PRESS 1 CD CONVERSION OF LOAD TESTING PRESS 1 3,00, , CE NIBBING & SLOTING M/C "BRIGHT SIDE FUDY" 1 3,25, , CF1) SHOT PEENING PLANT "TILLIGHMANS LTD" 1 CF CF2) 1 "IN LINE TYPE" LEAF SPNNG PEENING M/C DUSTOOL 1 9,60, , CF3) 2 NOS. SHOT PEENING M/C & 7-S-P1018 (JESSOP) 1 TOTAL EMD VALUE OF THE PAGE 1,42,150.00
7 LIST OF DISPOSABLE PLANTS & MACHINARIES LYING AT BURNPUR WORKS Group Machines in the Group Qty Group Reserve (in Encloser III If Bidding For, State "YES" EMD Submitted (In CG1) COIL SPRING END GRINDING M/C "W-20" "SNOW CO" 1 CG2) COIL SPRING END GRINDING M/C "SNOW CO" 1 CG CG3) COIL SPRING END TAPPEAR ROLLING M/C S-SP-1010 (JESSOP) 1 10,00, , CG4) COIL SPRING END GRINDING M/C S-SP-1013 (JESSOP) 1 CH1) SEETTING UP FURNACE 1 CH2) SEETTING UP FURNACE 1 CH3) 2 COIL FURNACE 1 CH4) COILING FURNACE (OIL BURNING) 1 CH5) COKE OVEN GAS FIRED FURNACE 1 CH CH6) COKE OVEN GAS FIRED FURNACE 1 10,42, , CH7) 1 FURNACE OIL FIRED 1 CH8) 1 FURNACE OIL FIRED 1 CH9) 1 FURNACE OIL FIRED (CONVERTED) 1 CH10) 1 FURNACE OIL FIRED (CONVERTED) 1 CH11) 1 FURNACE OIL FIRED (CONVERTED) 1 CI1) HEAT TREATMENT FURNACE "ISW" 1 CI 8,50, , CI2) H. TRT PLANT WITH AUTO TEM CONT. & GAS FIRED (IHCL) 1 TOTAL EMD VALUE OF THE PAGE 1,44, LIST OF DISPOSABLE PLANTS & MACHINARIES LYING AT BURNPUR WORKS Encloser III
8 Group Machines in the Group Qty Group Reserve (in If Bidding For, State "YES" EMD Submitted (In CJ1) GRINDER D-30 "LUKE & SPENCER" 1 CJ CJ2) GRINDER D-30 "LUKE & SPENCER" 1 CJ3) DOUBLE GRINDER "LUKE & SPENCER" 1 CJ4) DOUBLE GRINDER "LUKE & SPENCER" 1 90, , CK1) GARVITY ROLLER CONVEYOR 1 CK 15, CK2) GARVITY ROLLER CONVEYOR 1 CL1) HORIZONTAL FIXED CYLINDER PRESS 40 TONNE "H/BERRY" 1 CL CL2) OIL HYDRAULIC SPRING TESTING PRESS "PECO" 1 3,88, , CL3) 1 "BEMCO" 20 T SPRG. SCRAGG PRES S-SP (JESSOP) 1 CM1) SPRING COILING M/C S-SP-1011(JESSOP) 1 CM CM2) COILING MACHINE 1 4,18, , CM3) SPRING COILING M/C "MRD" "DUTCHLAND DORTNUD" 1 TOTAL EMD VALUE OF THE PAGE 45, LIST OF DISPOSABLE PLANTS & MACHINARIES LYING AT BURNPUR WORKS Group Machines in the Group Qty Group Reserve (in Encloser III If Bidding For, State "YES" EMD Submitted (In CN 6 SET HYDRAULIC CYLINDER PUMP & CONTROL VALVES 6 sets 1,20, , CO1) SPRING PLATE FINISHING PRESS 40T WITH MOTOR "HENRY BERRY" 1 CO CO2) SPRING PLATE FINISHING PRESS 200T WITH MOTOR "CRG & DCL" 1 4,85, ,250.00
9 CO3)3 STROKE EYE FORMING M/C "CINCINATTEE" 1 CP PUNCHING CROPPING & SHEARING M/C "CRAIG & DONALD" 1 1,75, , CQ1) 12-R-C/LESS GRND M/C WITH EQUIPMENTS "LINDS TOOL CO." 1 CQ 5,25, , CQ2) C/KEES GRINDER SBA-75 "METAL 4 PORT POLAND" 1 CR1) PILLAR DRILLER M/C PAD-2D "PUSCO" 1 CR 60, , CR2) PILLAR DRILLER M/C PAD-151 "PUSCO" 1 CS1) 1 FURNACE OIL FIRED 1 CS2) 1 FURNACE OIL FIRED (CONVERTED) 1 CS3) 1 FURNACE OIL FIRED (CONVERTED) 1 CS CS4) 1 FURNACE OIL FIRED (CONVERTED) 1 3,65, , CS5) 1 FURNACE OIL FIRED (CONVERTED) 1 CS6) 1 FURNACE OIL FIRED (CONVERTED) 1 CS7) 1 FURNACE OIL FIRED (CONVERTED) 1 TOTAL EMD VALUE OF THE PAGE 86, LIST OF DISPOSABLE PLANTS & MACHINARIES LYING AT BURNPUR WORKS Group Machines in the Group Qty Group Reserve (in Encloser III If Bidding For, State "YES" EMD Submitted (In CT1) 7 SPRING MAKER'S "ANVILS" 1 CT 60, , CT2) CENTRIPETAL STEEL PRESSURE BLOWER & MOTOR "KIRLOS" 1 CU 1 NO 40 MT SCRAGGING PRESS "HYDRAULIC PNEUMATIC" 1 1,35, , CV HOT COILING M/C "GAGON MODEL" JAPAN. 1 3,60, , CW1) 1 NO BAR STRAIGHTENING M/C "GKW" 1 CW CW2) 1 NO BAR PEELING M/C "GKW" 1 10,20, ,000.00
10 CW3) 1 NO. BAR PEELING M/C. THE B.M.S. 1 CX1) 1 MAGNAFLUX CRACK DETECTOR FOR R.M. SPR "N-DSTV TST. AP" 1 CX CX2) 1 EDDY CURRENT TESTING M/C "TECHNOPOUR" 1 5,68, , CX3) 1 PROVING RING 100 KW SPR. TESTING M/C "ASSO. INSTRUMENT" 1 CY1) 1 FURNACE OIL FIRED (CONVERTED) 1 CY 3,99, , CY2) CONVERSION OF ROTARY HEARTH FURNACE 1 CZ PROVISION OF EXHAUST & DUCTING SYSTEM 1 1,50, , TOTAL EMD VALUE FOR THE PAGE 1,34, GRAND TOTAL OF EMD VALUE (ENCLOSURE-III) 5,53, GRAND TOTAL OF EMD VALUE (ENCLOSURE-I+ENCLOSURE-II+ENCLOSURE-III) 11,39,403.00
Acceptance Page 2. Revision History 3. Introduction 14. Control Categories 15. Scope 15. General Requirements 15
Acceptance Page 2 Revision History 3 Introduction 14 Control Categories 15 Scope 15 General Requirements 15 Control Category: 0.0 Information Security Management Program 17 Objective Name: 0.01 Information
More informationDHL EXPRESS CANADA E-BILL STANDARD SPECIFICATIONS
DHL EXPRESS CANADA E-BILL STANDARD SPECIFICATIONS 1 E-Bill Standard Layout A B C D E F G Field/ DHL Account Number Billing Customer Name Billing Customer Address Billing Customer City Billing Customer
More informationFuture Trends in Airline Pricing, Yield. March 13, 2013
Future Trends in Airline Pricing, Yield Management, &AncillaryFees March 13, 2013 THE OPPORTUNITY IS NOW FOR CORPORATE TRAVEL MANAGEMENT BUT FIRST: YOU HAVE TO KNOCK DOWN BARRIERS! but it won t hurt much!
More informationVehicle Identification Numbering System 00.03
Vehicle Identification Numbering System 00.03 IMPORTANT: See Subject 050 for the vehicle identification numbering system for vehicles built before May 1, 2000. Federal Motor Vehicle Safety Standard 115
More informationCIRCLE COORDINATE GEOMETRY
CIRCLE COORDINATE GEOMETRY (EXAM QUESTIONS) Question 1 (**) A circle has equation x + y = 2x + 8 Determine the radius and the coordinates of the centre of the circle. r = 3, ( 1,0 ) Question 2 (**) A circle
More informationService Instruction. 1.0 SUBJECT: ECi Accessory Cases for Lycoming 4-Cylinder engines with single magneto configurations and TITAN 361 Engines
Title: Service Instruction ECi Accessory Cases Installed on Engines S.I. No.: 03-1 Page: 1 of 7 Issued: 2/28/2003 Revision: 2 (4/13/2009) Technical Portions are FAA DER Approved. 1.0 SUBJECT: ECi Accessory
More informationwww.ktmschnellversand.de
w.ktmschnellversand.de INDEX SPARE CONNECTORS AA-AR SPARE CONNECTORS AS-BK SPARE CONNECTORS BL-BZ SPARE CONNECTORS CA-CP 1x 2x 3x 4x SPARE CONNECTORS CQ-DM SPARE CONNECTORS DN-EL 5x 6x x x All information
More informationillustration ref. no. description SWAG no. RS Kombi, Octavia Scout 4x4, Octavia 4x4 for: Octavia, Octavia Kombi
Skoda protection Kit for strut 20 56 0003 - for: Fabia Skoda protection Kit for strut 30 56 0010 for: Felicia I, Felicia II - Skoda protection Kit for strut 30 56 0029, Octavia Kombi 4x4, Octavia RS, Octavia
More informationNOTICE TO MEMBERS No. 2005 047 May 10, 2005
NOTICE TO MEMBERS No. 2005 047 May 10, 2005 SYMBOL CONVERSION LONG-TERM EQUITY OPTIONS EXPIRING IN JANUARY Bourse de Montréal Inc. (the Bourse) and Canadian Derivatives Clearing Corporation (CDCC) hereby
More informationAPPENDIX R INFECTIOUS WASTE TREATMENT FACILITY PERMIT TO INSTALL APPLICATION
INFECTIOUS WASTE TREATMENT FACILITY PERMIT TO INSTALL APPLICATION Submittal Procedure - Submit four copies of the Permit to Install application (two copies to Central Office and two copies to the appropriate
More informationCUSCINETTI MONTANTE MAST ROLLERS
TIPO A - TYPE A TIPO B - TYPE B TIPO C - TYPE C TIPO BE - TYPE BE TIPO E - TYPE E TIPO AA - TYPE AA TIPO L - TYPE L TIPO F - TYPE F TIPO BT - TYPE BT TIPO BK - TYPE BK 1 TIPO N - TYPE N TIPO W- TYPE W
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationCNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines
The World Wide partnership for ultimate turning technologies CNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines a brief outline of vertical machines
More informationPARTNERS and RESPONSABILITIES
Location Key Facts Core Business Design and manufacture management of heavy machined steel structures and components for steel mill industry. Sales up to 40 MLN Staff 190 person Area of shops 35.000 m²
More informationDATA SUPPORT SPECIALIST CERTIFICATE
Requirements DATA SUPPORT SPECIALIST CERTIFICATE Required s (C25500A) 18 BAS 110 3 Business Analytics I CTI 110 3 Web, Programming and DB Foundations DBA 110 3 Database Concepts DBA 120 3 Database Programming
More informationDATA SUPPORT SPECIALIST CERTIFICATE PRODUCTIVITY SOFTWARE CERTIFICATE
Requirements DATA SUPPORT SPECIALIST CERTIFICATE Required s (C25500A) 18 BAS 120 3 Business Analytics I CTI 110 3 Web, Programming and DB Foundations DBA 110 3 Database Concepts DBA 120 3 Database Programming
More informationExplanation of NF-B Cost Build-Up for the 2013/14 Rate Period
Explanation of NF-B Cost Build-Up for the 2013/14 Rate Period The 2013/14 rates are based on the audited costs for facilities fiscal periods ending in 2011, unless otherwise stated. Those rates were calculated
More informationPattern Co. Monkey Trouble Wall Quilt. Size: 48" x 58"
.............................................................................................................................................. Pattern Co..........................................................................................
More informationSOLICITATION/CONTRACT/ORDER FOR COMMERICAL ITEMS
SOLICITATION/CONTRACT/ORDER FOR COMMERICAL ITEMS 1. REQUISITION NUMBER PAGE 1 OF OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24 & 30 2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER 5. RFQ NUMBER 6.
More informationFinal GCE Timetable Summer 2015
Final GCE table Summer 2015 1 GCE A/AS Modern Languages Speaking Tests Tuesday 28 April - Friday 29 2015 2 GCE Religious Studies: where candidates are taking two assessment units which have been timetabled
More information2200 Series End Drive Conveyors
00 Series End Drive Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-397-8664 TEL: 6-367-7600 Hartland, WI 5309-000
More informationA. All equipment and materials used shall be standard components that are regularly manufactured and used in the manufacturer s system.
ENDURA NSM5200 SERIES NETWORK STORAGE MANAGER TECHNICAL SPECIFICATIONS SECURITY SYSTEM DIVISION 28 ELECTRONIC SAFETY AND SECURITY LEVEL 1_28 20 00 ELECTRONIC SURVEILLANCE LEVEL 2_28 23 00 VIDEO SURVEILLANCE
More informationTransient Voltage Suppressor SMBJ5.0 - SMBJ440CA
Features: Glass passivated junction Low incremental surge resistance, excellent clamping capability 600W peak pulse power capability with a 10/1,000μs waveform, repetition rate (duty cycle): 0.01% Very
More information7200 Series Sanitary End Drive Conveyors
7200 Series Sanitary End Drive Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 20 975 Cottonwood Ave. TEL: 1-800-397-8664 TEL: 262-367-7600
More informationAttachment "A" - List of HP Inkjet Printers
HP Deskjet 350c Printer HP Deskjet 350cbi Printer HP Deskjet 350cbi Printer w/roller-case HP Deskjet 420 Printer HP Deskjet 420c Printer HP Deskjet 610c Printer HP Deskjet 610cl Printer HP Deskjet 612c
More informationExcel Invoice Format. SupplierWebsite - Excel Invoice Upload. Data Element Definition UCLA Supplier website (Rev. July 9, 2013)
Excel Invoice Format Excel Column Name Cell Format Notes Campus* Supplier Number* Invoice Number* Order Number* Invoice Date* Total Invoice Amount* Total Sales Tax Amount* Discount Amount Discount Percent
More information3200 Series End Drive Flat and Cleated Belt Conveyors
00 Series End Drive Flat and Cleated Belt Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-8664 TEL: 6-67-7600
More informationUK ResiEMEA Version 2.0.0
The following is Fitch Ratings file layout and fields for UK mortgage pools submitted to the Fitch Ratings UK RMBS Group as of 9 September 2009. Please e-mail mortgage files to the appropriate person in
More informationHow to Subnet a Network How to use this paper Absolute Beginner: Read all Sections 1-4 N eed a q uick rev iew : Read Sections 2-4 J ust need a little h elp : Read Section 4 P a r t I : F o r t h e I P
More informationFrench Journey Day Trains Valid for sales and travel from April 15, 2011 until further notice
French Journey Day Trains TGV Routes: Paris- Avignon, Bordeaux, Dijon, Lourdes, Lyon, Marseille, Nice, St Pierre Des Corps, Strasbourg Teoz Routes (TJC): Clermont Ferrand - Limoges -Toulouse - Bordeaux
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationcost-effective automation
cost-effective automation compact units for drilling tapping milling www.esystems.com AIR HYDRAULIC DRILLING UNIT BE(F) AND BE(FP) AIR HYDRAULIC DRILLING UNIT BE(F) The basic design of the BE(F) consists
More informationCylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
More informationCROSS REFERENCE. Cross Reference Index 110-122. Cast ID Number 110-111 Connector ID Number 111 Engine ID Number 112-122. 2015 Ford Motor Company 109
CROSS REFERENCE Cross Reference Index 110-122 Cast ID Number 110-111 Connector ID Number 111 112-122 2015 Ford Motor Company 109 CROSS REFERENCE Cast ID Number Cast ID Ford Service # MC Part # Part Type
More informationDUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
More informationBaker & Taylor, Inc. Electronic Data Interchange (EDI) Implementation Guide for Publishers. Revised 2011
Electronic Data Interchange (EDI) Implementation Guide for Publishers Revised 2011 PUBLISHER IMPLEMENTATION GUIDELINE FOR EDI TO OUR PROSPECTIVE TRADING PARTNERS This Implementation Guide is provided with
More informationINTRODUCTION. Dear Business Partners,
INTRODUCTION Dear Business Partners, We are proud to issue the new catalogue of STROJFERR s.r.o. which was established in 1997 as a genuinely Czech company. In its activities and production programme,
More informationVisa Smart Debit/Credit Certificate Authority Public Keys
CHIP AND NEW TECHNOLOGIES Visa Smart Debit/Credit Certificate Authority Public Keys Overview The EMV standard calls for the use of Public Key technology for offline authentication, for aspects of online
More informationHighly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
More informationDriving down corporate carbon emissions through sustainable property management
Driving down corporate carbon emissions through sustainable property management Driving down corporate carbon emissions through sustainable property management Challenge IBM proposal Business opportunity
More informationVictims Compensation Claim Status of All Pending Claims and Claims Decided Within the Last Three Years
Claim#:021914-174 Initials: J.T. Last4SSN: 6996 DOB: 5/3/1970 Crime Date: 4/30/2013 Status: Claim is currently under review. Decision expected within 7 days Claim#:041715-334 Initials: M.S. Last4SSN: 2957
More informationHeavy Duty Equipment Mechanic (Class Code 3743) Task List. Inspection and Diagnosis
Heavy Duty Equipment Mechanic (Class Code 3743) Task List Inspection and Diagnosis In order to verify complaints and determine malfunctions a Heavy Duty Mechanic: 1. Reads operators written trouble reports,
More informationQP-2040L CNC VERTICAL MACHINING CENTER
Page 1 of 8 QP-2040L CNC VERTICAL MACHINING CENTER Page 2 of 8 MACHINE FEATURES: This fully upgradeable VMC is designed to accommodate various upgrades in the future so that it can be reconfigured for
More informationThe current SMT Machine & Tool Company facilities include 80,000 square feet of manufacturing, assembly and office space.
is a machine tool company that specializes in machining and assembly work. manufactures projects for the Paper, Printing, Construction and Food and Beverage Industries. Over the past several years SMT
More informationFACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / HAND TOOLS Y N R
FACILITY ACCREDITATION CHECKLIST #001 APPRENTICESHIP Designated Trade: Level 1 2 3 4 Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK under the appropriate
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationTIMETABLE SYSTEM A NOTE FOR MODULE ORGANISERS AND TIME-TABLERS
UNIVERSITY OF EAST ANGLIA TIMETABLE SYSTEM A NOTE FOR MODULE ORGANISERS AND TIME-TABLERS Timetable planning for the 2010/11 academic year and beyond will be undertaken in accordance with a new Basic scheme
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationChapter 3. Maximum Mortgage Amounts on Refinance Transactions Table of Contents
Chapter 3, Table of Contents Chapter 3. Maximum Mortgage Amounts on Refinance Transactions Table of Contents Section A. Refinance Transaction Overview Overview... 3-A-1 1. General Information on Refinance
More information"HIGHER EDUCATION VALUES AND OPINIONS SURVEY" ADVANCED PLACEMENT TEACHERS and GUIDANCE COUNSELORS May-June 1994
"HIGHER EDUCATION VALUES AND OPINIONS SURVEY" ADVANCED PLACEMENT TEACHERS and GUIDANCE COUNSELORS May-June 1994 VARIABLE SURVEY ANSWER NAME QUESTION CATEGORIES Facsimile the original mail questionnaire
More informationSERVICE CONTRACT EXECUTION REVAMP & REBUILD
:: :: :: :: SALES SERVICE CONTRACT EXECUTION REVAMP & REBUILD The Pradman Profile Established in 1969 Total Manpower 108+ Focus Industries Steel, Structural Steel Infrastructure Transmission Tower Manufacturing,
More informationSeptember 1, 2003 CONCRETE MANUAL 5-694.900 CONCRETE PAVEMENT REHABILITATION 5-694.900
September 1, 2003 CONCRETE MANUAL 5-694.900 5-694.901 GENERAL CONCRETE PAVEMENT REHABILITATION 5-694.900 Concrete Pavement Rehabilitation is an extremely valuable tool of the Minnesota Department of Transportation
More informationMACHINES FOR REFRIGERATION AND AIR CONDITIONING
00 MA0900 MACHINES FOR REFRIGERATION AND AIR CONDITIONING The widespread use of air conditioning systems, both civil and industrial, in order to increase the comfort at work and at home, as well as the
More information2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
More informationElectric chain hoists LIFTKET
Electric chain hoists LIFTKET 1 Spare part list AA AB Description of spare part Page Lifting gear section 01: hoist body 4 Version 1-1.3 5 Version 2-4.2 6 Version 5-7.2 7 Version 8.1-9.1 8 Version 1AK-5.1AK
More information11 + Non-verbal Reasoning
Prti Tst + Non-vrl Rsoning R th instrutions rfully. Do not gin th tst or opn th ooklt until tol to o so. Work s quikly n s rfully s you n. Cirl th orrt lttr from th options givn to nswr h qustion. You
More informationMode. DQ group for DQS mode. DQ group for DQS mode. DQ group for DQS mode. DQ group for DQS mode. DQ group for DQS mode F1508 & F1020 F1508 & F1020
x8/x9 x16/x18 x32/x36 x5 (Note 2) DQ group for VCCD_PLL7 L29 H25 VCCA_PLL7 M29 H26 GNDA_PLL7 K29 F26 GNDA_PLL7 K30 G26 B2 VREFB2N0 FPLL7CLKp INPUT C39 D30 B2 VREFB2N0 FPLL7CLKn INPUT C38 D29 B2 VREFB2N0
More informationWIRING REQUIREMENTS FOR HOUSEHOLD CIRCUITS
WIRING REQUIREMENTS FOR HOUSEHOLD CIRCUITS Each appliance listed in Table C2.4 needs an individual circuit. Protect each appliance with a delay-type fuse or breaker of the size stated by the manufacturer.
More informationBLASTING SYSTEMS. Turbine blasting systems. Air blasting systems. Automatic Painting plants
BLASTING SYSTEMS Turbine blasting systems Air blasting systems Automatic Painting plants 1, Dust Collector 2, Cyclone Separator 3, Sand (shot) Storage Hopper 4, Bucket elevator 5, Primary separator 6,
More informationa) CNC turning center Jyoti DX100 Qty. = 6 Nos
LIST OF MACHINES 1) CNC VMC (milling) Total Qty = 1 Nos X axis Travel = 500 mm Y axis Travel = 450 mm Z axis Travel = 400 mm Accuracy Positioning = 0.005 mm Accuracy Repeability = 0.003 mm 2 ) CNC TURNING
More informationPVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
More informationNRFs administrasjon TLF 22 43 76 60 post@vvsnrf.no. Norske Rørgrossisters Forening. Efficientinformation logistics. Terje Røising General Manager
NRFs administrasjon TLF 22 43 76 60 post@vvsnrf.no Terje Røising General Manager Morten Svensen Technical Manager Efficientinformation logistics Iren Bjerklund Database Operator NRF Excel sheet. The following
More informationINDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
More informationSPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
More informationContent. Document no: D#39832. Version: 4/16/2014
VI&VA-Interface Introduction Content Content 1. Introduction 3 2. History 3 3. VI&VA-Interface for CodX PostOffice V2013.06 and V2013.09 3 4. VI&VA-Interface for CodX PostOffice V2013.11 13 5. VI&VA-Interface
More informationSafety. Fire Resistant. Gas Cylinder
All Cabinets Ship Flyer CAB09...Many in 48 hrs. Heavy Duty All Welded CABINETS 31 Models Safety Fire Resistant Spill Containment Gas Cylinder Made in USA Distributed By: Our Quality Serves You Longer JAMCO
More informationXFE. The cost effective starter for all AC induction motors from 4A 2800A The choice for small to medium industrial applications
The cost effective starter for all AC induction motors from 4A 2800A The choice for small to medium industrial applications The XFE Soft Starter range provides a combination of competitive prices, flexible
More information1. Find the length of BC in the following triangles. It will help to first find the length of the segment marked X.
1 Find the length of BC in the following triangles It will help to first find the length of the segment marked X a: b: Given: the diagonals of parallelogram ABCD meet at point O The altitude OE divides
More informationPrecise heavy-duty cutting
PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options
More informationvacon ac drives for mining & minerals
vacon ac drives for mining & minerals 1 strong experience in mining & minerals Vacon AC drives are robust to handle your most demanding requirements from simple ventilation to the most complex load sharing
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER: CONTACT PERSON: DATE: E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More information:: SALES :: SERVICE :: CONTRACT EXECUTION :: REVAMP & REBUILD
:: SALES :: SERVICE :: CONTRACT EXECUTION :: REVAMP & REBUILD The Pradman Profile Established in 1969 Total Manpower 108+ Focus Industries Steel, Structural Steel Infrastructure Transmission Tower Manufacturing,
More informationINDOOR COILS. RCFL- featuring Industry Standard R-410A Refrigerant CASED/UNCASED COILS FOR GAS AND OIL FURNACES
FORM NO. C11-211 REV. 7 Supersedes Form No. C11-211 Rev. 6 INDOOR COILS RCFL- featuring Industry Standard R-410A Refrigerant CASED/UNCASED COILS FOR GAS AND OIL FURNACES AIRFLOW CAPACITIES 600-1,900 CFM
More informationOUTCOME 2 INTERNAL COMBUSTION ENGINE PERFORMANCE. TUTORIAL No. 5 PERFORMANCE CHARACTERISTICS
UNIT 61: ENGINEERING THERMODYNAMICS Unit code: D/601/1410 QCF level: 5 Credit value: 15 OUTCOME 2 INTERNAL COMBUSTION ENGINE PERFORMANCE TUTORIAL No. 5 PERFORMANCE CHARACTERISTICS 2 Be able to evaluate
More informationFACILITIES / SYSTEMS REQUIRING ASSESSMENT
M7-360 (SSPF) SYSTEMS B. FAN COIL UNIT C. A/C (LIEBERT) D. PUMPS 1. CHILLED WATER PUMP 2. HOT WATER PUMP E. REFRIGERATOR F. EXHAUST FAN G. FAN SUPPLY H. HUMIDIFIER, STEAM I. SHOWER AIR A. CRANES 1. CRANE
More informationAMADA MODULAR FLEXIBLE MANUFACTURING CELL ASL250 + VIPROS 358K + ASPR250-UL + SS12
AMADA MODULAR FLEXIBLE MANUFACTURING CELL ASL250 + VIPROS 358K + ASPR250-UL + SS12 As At 08/01/03 1. OVERVIEW Amada Modular Flexible Manufacturing Cell The proposal enclosed is for a fully Automated, flexible
More informationThe Bonelle Tool and Cutter Grinder
The Bonelle Tool and Cutter Grinder The grinder was constructed about 1987 and exhibited at the 89th Model Engineering exhibition where it was awarded a bronze medal (see ME Vol164 No 3868 page 273). Subsequently
More informationQUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE
QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE FABRICATION, MACHINING, METAL CASTING, LOAD TESTING, SAND BLASTING & PAINTING,
More informationPropeller Equipment Sale. For Questions please contact Dan Cork Propdoc@aol.com 918-636-3567
Propeller Equipment Sale For Questions please contact Dan Cork Propdoc@aol.com 918-636-3567 Propeller Equipment Sale The equipment for sale is used in the repair and overhaul of aircraft propellers. Propeller
More informationOperating Instruction Manual For S-40B Hydraulic Cutters With Parts List
HUSKIE TOOLS, INC. Operating Instruction Manual For S-40B Hydraulic Cutters With Parts List GENERAL INFORMATION GUIDE FOR S-40B CUTTER The following steps are guidelines for safe operation of the Huskie
More informationUNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING
UNIT 1 INTRODUCTION TO AUTOMOBILE ENGINEERING Introduction to Automobile Engineering Structure 1.1 Introduction Objectives 1.2 Definition 1.3 Classification of Vehicles 1.4 Layout of an Automobile Chassis
More informationVickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93
Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct
More informationALTRA 400 Operator Manual. Planographs and Wiring Diagrams
Planographs and Wiring Diagrams 16 Altra 400 Final Assembly All Altras w/head # Part # Description Specific Use (if any) 1 60323A Tank Assy, Altra 400 115 Volt model 60358A Tank Assy, Altra 400 SP 230
More informationTECHNICAL SPECIFICATION FOR PROJECTION WELDING MACHINE (Qty. 2 Nos.)
TECHNICAL SPECIFICATION FOR PROJECTION WELDING MACHINE (Qty. 2 Nos.) 1. Requirement: Two (02) Nos. DC Type, 3 phase, 3 wire Projection Welding Machine is required for welding of ventilation M.S. / Stainless
More informationDry Chemical Systems TWIN AGENT CAPABILITY
Dry Chemical Systems The following data is based on maximum anticipated area of spill or contained area of hazard and the fire fighters being experienced professionals. If the fire fighter is a novice,
More informationGENERAL INFORMATION FOR REPAIR AND MAINTENANCE OF CENTRAL AIR CONDITIONING PLANT ( Direct & Chiller ).
GENERAL INFMATION F REPAIR AND MAINTENANCE OF CENTRAL AIR CONDITIONING PLANT ( Direct & Chiller ). Name of sector Refrigeration & Air Conditioning Name of Module REPAIR AND MAINTENANCE OF CENTRAL AIR CONDITIONING
More informationREGULATORS 175/153 Series
175/153 Series 175 HEATING 153 COOLING Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2002 Watson McDaniel Company Revised 7/2002 175 / 153 Screwed
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More informationWorkers. There are many different jobs in a steel mill. As with most industries, the main jobs fall into a list of categories, such as:
Workers There are many different jobs in a steel mill. As with most industries, the main jobs fall into a list of categories, such as: Laborer Foreman Supervisor * Choose one of the job titles. Identify
More informationHCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA
HCW 1000 NEW TYPE OF LIGHT MACHINE FROM SKODA INTRODUCTION HCW 1000 ŠKODA MACHINE TOOL a.s. continues its more than 100 years old tradition of high-precision machine tool manufacturing. Based on market
More informationEVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING Revised for ACCESS TO APPRENTICESHIP
EVALUAT ING ACADEMIC READINESS FOR APPRENTICESHIP TRAINING for ACCESS TO APPRENTICESHIP SCIENCE SKILLS SIMPLE MACHINES & MECHANICAL ADVANTAGE AN ACADEMIC SKILLS MANUAL for The Construction Trades: Mechanical
More informationEducational Innovations
Educational Innovations Next Generation Science Standards: SS-11 World s Simplest Motor MS-PS2-3 Ask questions about data to determine the factors that affect the strength of electric and magnetic forces.
More informationE T K A 14:36 18.02.20100 970-00. Year. Illustration. Model. Seite: 001. et_bt1.frm. Pos Part Number Name Remarks Qty Model.
0 7 70-00 4:36 8.02.2000 connector housing pin 05 05 37 diode connector 2 3 4 5 6 2 05 05 37 D diode connector 7 8 0 2 3 4 5 6 7 8 20 2 22 23 24 25 26 27 28 2 30 3 32 33 34 3 357 07 7 B terminal pin housing
More informationAXIS DESIGNATION IN NC PART PROGRAMMING
AXIS DESIGNATION IN NC PART PROGRAMMING 1 FUNCTIONS PERFORMED BY THE CONTROL SYSTEM OF NC MACHINE TOOL DISPLACEMENT OF SLIDE MEMBERS. ANGULAR ROTATION OF THE CIRCULAR TABLE. STOP / START MAIN SPINDLE.
More informationDATING YOUR GUILD 1952-1960
DATING YOUR GUILD 1952-1960 YEAR APPROXIMATE LAST SERIAL NUMBER PRODUCED 1953 1000-1500 1954 1500-2200 1955 2200-3000 1956 3000-4000 1957 4000-5700 1958 5700-8300 1959 12035 1960-1969 This chart displays
More informationCooking at the Speed of light!
Cooking at the Infrared Cooking & Colouring Infrabaker is a modular infrared continuous cooking system developed by Infrabaker International. The machine is designed to cook and/or put colour on a wide
More informationCompany Header POLLUTION INCIDENT RESPONSE MANAGEMENT PLAN. For [site name] [EPL number]
Company Header POLLUTION INCIDENT RESPONSE MANAGEMENT PLAN For [site name] [EPL number] Pollution Incident Response Management Plan for [insert site name] Contents [need to check correct page numbers]
More informationVibration and Noise datasheet (13-127E)_Ver1.xls
and datasheet (13-127E)_Ver1.xls L WA L PA 1100 Planer 3,0 1,5 60745-2-14 Planing softwood 92 103 3 no load 1902 Planer 5,5 1,5 60745-2-14 Planing softwood 84 95 3 no load 2704 Table Saw - - 61029-2-1-94
More informationNFIP LOWEST FLOOR GUIDE ABRIDGED
NFIP LOWEST FLOOR GUIDE ABRIDGED National Flood Insurance Program SCROLL DOWN 1 NFIP LOWEST FLOOR GUIDE QUICK REFERENCE This is an abridged version of the 2013 Flood Insurance Manual Lowest Floor Guide.
More information