Industrial Generator Set Accessories

Transcription

1 Industrial Generator Set Accessories Weather/Sound Enclosure and Subbase Packages Applicable to the following models: REOZM Kohler enclosures protect stationary generator sets from the elements, animal intrusion, and unwanted entry. The enclosure design allows ample air flow ensuring full generator set performance. The subbase fuel tank provides an onsite diesel fuel supply. Weather Enclosure Sound Enclosure kw Sound Enclosure 900/1000 kw Weather Enclosure Standard Features Critical silencer, flexible exhaust connector, and rain cap. Lift base or tank mounted, steel (aluminum optional) construction with hinged and removable doors. Fade-, scratch-, and corrosion-resistant Kohler cream beige powder-baked finish. Lockable, flush-mounted door latches. Air inlet louvers and baffles reduce rain and snow entry. Pitched enclosure roof to minimize water accumulation. Battery charger mounting when optional battery charger is ordered. Sound Enclosure Standard Features Includes all of the weather enclosure features with the substitution of a hospital silencer on the level 2 sound enclosure. Vertical air inlet and outlet hoods with 90 degree angles to redirect air and reduce noise. Acoustic insulation that meets UL 94 HF1 flammability classification. Level 1 (L1) sound attentuated enclosure that offers --15 db(a) sound reduction at 7 m (23 ft.) using 76 mm (3 in.) of acoustic insulation covered by a perforated aluminum interior liner on the walls (900/1000REOZM only). Level 2 (L2) sound attentuated enclosure that offers --25 db(a) sound reduction at 7 m (23 ft.) using 76 mm (3 in.) of acoustic insulation with a vinyl acoustic sound barrier covered by a perforated aluminum interior liner on the walls. The roof has 76 mm (3 in.) of acoustic insulation covered by a perforated aluminum interior liner and the intake/discharge hoods have 51 mm (2 in.) of acoustic insulation (900/1000REOZM only). Sound attentuated enclosure that offers an average of 75 db(a) sound level at 7 m (23 ft.) using 51 mm (2 in.) of acoustic insulation, acoustic-lined air inlet hoods, and acoustic-lined air discharge hood ( REOZM only). Subbase Features The above-ground rectangular secondary containment tank mounts directly to the generator set, below the generator set skid (subbase). Both the inner and outer UL-listed tanks have emergency relief vents. Flexible fuel lines are provided with subbase fuel tank selection. The containment tank s double-wall construction protects against fuel leaks or ruptures. The inner (primary) tank is sealed inside the outer (secondary) tank. The outer tank contains the fuel if the inner tank leaks or ruptures. G6-69 8/07e Page 1

2 Double-Wall Secondary Containment Subbase REOZM GM Overflow to main tank 2. Low level switch 3. Additional fitting for optional accessory 4. Basin drain 5. Emergency vent fitting 6. Fitting for removable fuel return dip tube 7. Fitting for removable engine supply dip tube 8. Fuel inlet from supply pump 9. Fuel level gauge fitting 10. Fuel fill fitting with lockable cap and 8 in. riser 11. Normal vent fitting 12. Electrical stub-up area open to bottom 13. Fuel in basin switch Note: 600REOZM shown, 750/800REOZM is similar. Standard Features Heavy-gauge construction Integral stub-up area UL listed Lockable fill cap and riser, 2 in. NPT Low fuel level switch for controller alarm Mechanical fuel gauge Normal vent with riser and mushroom cap Emergency pressure-relief vent inner and outer tanks Fuel supply and fuel return openings Basin drain Float fitting for pump control for fuel transfer system model Overflow opening for fuel transfer system model G6-69 8/07e Page 2

3 Double-Wall Secondary Containment Subbase 900/1000REOZM Inner tank leak alarm (standard) 2. Emergency pressure relief vent outer tank (standard) 3. Emergency pressure relief vent inner tank (standard) 4. Fuel supply line 5. Normal vent with riser and mushroom cap (standard) 6. Fuel return line 7. Lockable/sealed fill cap with riser (standard) 8. Mechanical fuel gauge (standard) 9. Low fuel level switch for controller alarm (compatible with Decision-Maker 3+ and Decision-Maker 550) 10. Day tank kit 11. 1/2 in. NPT for leak detection switch Standard Features Heavy-gauge construction Integral stub-up area Removable end channel for easy access to stub-up area UL listed Emergency pressure-relief vent outer tank Lockable fill cap and riser, 2 in. NPT Low fuel level switch for controller alarm Mechanical fuel gauge Normal vent with riser and mushroom cap Emergency pressure-relief vent inner and outer tanks Fuel supply and fuel return openings Basin drain Fuel transfer system. Tank top mounting bracket with auxiliary fuel fittings offers location for optional fuel transfer system for extended generator set operation when used with companion (main) fuel supply tank Float fitting for pump control for fuel transfer system model Overflow opening for fuel transfer system model Pump and motor-mounting pad for fuel transfer system model Fuel pump fill opening for fuel transfer system model G6-69 8/07e Page 3

4 TIMER FOR DC LIGHTS BATTERY CHARGER (UNDER ) SPACE HEATER WIRING 3--WAY SWITCH w/ GFI ENGINE BLOCK HEATER WIRING VENTILATION FAN WIRING MOTORIZED DISCHARGE DAMPER WIRING MOTORIZED INTAKE DAMPER WIRING INCANDESCENT LIGHT (4 PLC S) DC LIGHT (4 PLC S) BATTERY CHARGER WIRING 3--WAY SWITCH w/ GFI INCANDESCENT LIGHT (4 PLC S) SPACE HEATER TIMER FOR DC LIGHTS THERMOSTAT FOR VENTILATION FAN DC LIGHT (4 PLC S) INCANDESCENT LIGHT (4 PLC S) VENTILATION FAN DC LIGHT (4 PLC S) VENTILATION FAN THERMOSTAT FOR VENTILATION fan RELAY FOR MOTORIZED DAMPERS TIMER FOR DC LIGHTS 60 OFF Turn 40 Past WAY SWITCH w/ GFI MOTORIZED INTAKE DAMPER WIRING 3--WAY SWITCH w/ GFI BATTERY CHARGER MOTORIZED DISCHARGE DAMPER WIRING 3--WAY SWITCH w/ GFI ENGINE BLOCK HEATER WIRING ENGINE BLOCK HEATER WIRING MOTORIZED DISCHARGE DAMPER WIRING BATTERY CHARGER INCANDESCENT LIGHT (4 PLC S) DC LIGHT (4 PLC S) THERMOSTAT FOR VENTILATION FAN SPACE HEATER VENTILATION FAN TIMER FOR DC LIGHTS RELAY FOR MOTORIZED DAMPERS MOTORIZED DISCHARGE DAMPER WIRING ENGINE BLOCK HEATER WIRING 3--WAY SWITCH w/ GFI BATTERY CHARGER MOTORIZED INTAKE DAMPER WIRING 600REOZM Enclosure Electrical Options Layout ADV-6963C-D G6-69 8/07e Page 4

5 3--WAY SWITCH w/ GFI TIMER FOR DC LIGHTS BATTERY CHARGER (UNDER ) BATTERY CHARGER WIRING VENTILATION FAN WIRING MOTORIZED DISCHARGE DAMPER WIRING SPACE HEATER WIRING MOTORIZED INTAKE DAMPER WIRING INCANDESCENT LIGHT (4 PLC S) ENGINE BLOCK HEATER WIRING DC LIGHT (4 PLC S) 3--WAY SWITCH w/ GFI SPACE HEATER TIMER FOR DC LIGHTS RELAY FOR MOTORIZED DAMPERS THERMOSTAT FOR VENTILATION FAN DC LIGHT (4 PLC S) INCANDESCENT LIGHT (4 PLC S) VENTILATION FAN INCANDESCENT LIGHT (4 PLC S) DC LIGHT (4 PLC S) VENTILATION FAN THERMOSTAT FOR VENTILATION FAN D.C. A.C. ON O R6RTRS A 3--WAY SWITCH w/ GFI TIMER FOR DC LIGHTS MOTORIZED INTAKE DAMPER WIRING 3-WAY SWITCH w/gfi BATTERY CHARGER MOTORIZED DISCHARGE DAMPER WIRING ENGINE BLOCK HEATER WIRING BATTERY CHARGER WIRING ENGINE BLOCK HEATER WIRING MOTORIZED DISCHARGE DAMPER WIRING 3--WAY SWITCH w/ GFI BATTERY CHARGER BATTERY CHARGER WIRING DC LIGHT (4 PLC S) INCANDESCENT LIGHT (4 PLC S) VENTILATION FAN THERMOSTAT FOR VENTILATION FAN SPACE HEATER TIMER FOR DC LIGHTS RELAY FOR MOTORIZED DAMPERS Turn Past OFF R6RTRS 15O 10 A.C. INPUT D.C. 25 A ON MOTORIZED DICHARGE DAMPER WIRING ENGINE BLOCK HEATER WIRING BATTERY CHARGER WIRING 3-WAY SWITCH w/gfi BATTERY CHARGER MOTORIZED INTAKE DAMPER WIRING 750/800REOZM Enclosure Electrical Options Layout ADV-6986C-B G6-69 8/07e Page 5

6 Capacity, L (gal.) Weather Enclosure and Subbase Specifications Weather Enclosure and Subbase Est. Fuel Supply Hours Dimensions, mm (in.) Weight, kg (lb.) at 60 Hz With Steel With Aluminum Height A, w/full Load Length B Max. Width Height Enclosure Enclosure mm (in.) 600REOZM Lift base 0 0 (0) 3756 (147.8) 7395 (16295) 6792 (14970) 0 (0) 2033 (537) (159.8) 9308 (20503) 8705 (19178) 305 (12) 4111 (1086) (197) 4366 (171.8) 9609 (21166) 9006 (19841) 610 (24) 2691 (105.9) 6136 (1621) (177.8) 9876 (21754) 9273 (20429) 762 (30) 8089 (2137) (204) (22373) 9555 (21048) 914 (36) 4670 (183.8) 8) (3215) (292) (24711) (23386) 914 (36) Note: Refer to the enclosure/fuel tank dimension drawing ADV-6963 for dimensions not shown. Capacity, L (gal.) Weather Enclosure and Subbase Est. Fuel Supply Hours Dimensions, mm (in.) Weight, kg (lb.) at 60 Hz With Steel With Aluminum Height A, w/full Load Length B Max. Width Height Enclosure Enclosure mm (in.) 750/800REOZM Lift base 0 0 (0) 3856 (151.8) 8884 (19575) 8270 (18225) 0 (0) 2850 (753) (163.8) (24974) (23624) 305 (12) 5670 (1498) (220) 4466 (175.8) (25682) (24332) 610 (24) 2841 (111.8) 8528 (2253) (26612) (25262) (3001) (257) 4770 (187.8) (27919) (26569) 914 (36) (4484) (370) (31155) (29805) Note: Refer to the enclosure/fuel tank dimension drawing ADV-6986 for dimensions not shown. Weather Enclosure and Subbase Est. Fuel Supply Enclosure and Hours at 60 Hz Dimensions, mm (in.) Height, Height H, Capacity, L (gal.) w/full Load Length Width Weight, kg (lb.) mm (in.) mm (in.) 900REOZM, Enclosure Series: KP200BWP Lift base (27525) 3099 (122) 203 (8) 3501 (925) (200) 2743 (108) (30215) 3353 (132) 457 (18) 7002 (1850) (31540) 3759 (148) 864 (34) Note: Refer to the enclosure/fuel tank dimension drawing ADV-6754 for dimensions not shown. Weather Enclosure and Subbase Est. Fuel Supply Enclosure and Hours at 60 Hz Dimensions, mm (in.) Height, Height H, Capacity, L (gal.) w/full Load Length Width Weight, kg (lb.) mm (in.) mm (in.) 1000REOZM, Enclosure Series: KP200BWP Lift base (27525) 3099 (122) 203 (8) 3501 (925) (200) 2743 (108) (30215) 3353 (132) 457 (18) 7002 (1850) (31540) 3759 (148) 864 (34) Note: Refer to the enclosure/fuel tank dimension drawing ADV-6754 for dimensions not shown. G6-69 8/07e Page 6

7 3573 [140.7] Dimensions in [ ] are inch equivalents. See fuel tank height A and length B in table ELECTRICAL STUB--UP 4076 [160.5] REF 892 [35.1] 884 [34.8] 1348 [53.1] FUEL LEVEL GAUGE FUEL FILL (SHOWN w/ 26.5 LITER [7 GALLON] SPILL CONTAINMENT) 2691 [105.9] MAXIMUM WIDTH SPACE HEATER RAIN CAP 2743 [108.0] 356 [14.0] 762 [30.0] SILENCER (SHIPPED LOOSE) [12] INLET AND OUTLET (NOM) 950 X 2300 [37.4 X 90.5] FIXED AIR INTAKE LOUVER (STANDARD) OR MOTORIZED COMBINATION LOUVER/DAMPER 1400 X 1400 [55.1 X 55.1] MOTORIZED OR GRAVITY DISCHARGE DAMPER 2350 [92.5] PUNCHED RADIATOR DISCHARGE SCREEN (STANDARD) 1750 [68.9] OPENING WITH 19 L [5 GAL.] SPILL CONTAINMENT (EXTERNAL MOUNT; SHIPPED LOOSE 1750 [68.9] 850 [33.5] 2300 [90.6] 1/2 NPT BASIN DRAIN 5050 [198.8] 1100 X 2300 [43.3 X 90.5] FIXED AIR INTAKE LOUVER (STANDARD) OR MOTORIZED COMBINATION LOUVER/DAMPER VENTILATION FAN 877 [34.5] A 2879 [113.3] 1/2 NPT OIL DRAIN 1/2 NPT COOLANT DRAIN CRANKCASE VENT 111 [4.4] B (12,170 LITER/3515 GALLON TANK SHOWN) 16 [.6] 600REOZM Weather Enclosure ADV-6963A-D G6-69 8/07e Page 7

8 Dimensions in [ ] are inch equivalents. See fuel tank height A and length B in table 3649 [143.7] 4226 [166.4] REF 892 [35.1] 884 [34.8] FUEL LEVEL GAUGE 1075 [42.3] ELECTRICAL STUB--UP FUEL FILL (SHOWN w/ 26.5 LITER [7 GALLON] SPILL CONTAINMENT) 2841 [111.8] MAXIMUM WIDTH SPACE HEATER 1750 [68.9] OPENING WITH RAIN CAP 762 [30.0] 2743 [108.0] 356 [14.0] 1550 X 2300 [61 X 90.5] FIXED AIR INTAKE LOUVER (STANDARD) OR MOTORIZED COMBINATION LOUVER/DAMPER 1500 X 1750 [59 X 68.9] MOTORIZED OR GRAVITY DISCHARGE DAMPER 19 L [5 GAL.] SPILL CONTAINMENT (EXTERNAL MOUNT; SHIPPED LOOSE 2500 [98.4] PUNCHED RADIATOR DISCHARGE SCREEN (STANDARD) 1750 [68.9] 1/2 NPT OIL DRAIN 850 [33.5] 1/2 NPT COOLANT DRAIN 1/2 NPT BASIN DRAIN 2450 [96.5] 1550 X 2300 [61 X 90.5] FIXED AIR INTAKE LOUVER (STANDARD) OR MOTORIZED COMBINATION LOUVER/DAMPER 5650 [222.4] SILENCER (SHIPPED LOOSE) [12] INLET AND OUTLET VENTILATION FAN 877 [34.5] A 2979 [117.3] CRANKCASE VENT 111 [4.4] B (16,974 LITER/4484 GALLON TANK SHOWN) 16 [.6] 750/800REOZM Weather Enclosure ADV-6986A-B G6-69 8/07e Page 8

9 Dimensions in [ ] are inch equivalents. Note: W4 x 13 beams required at same mounting location as tank for Florida Dept. of Environmental Resources Management. See fuel tank height H in table. 787 [31.0] DOOR REMOVABLE CLEARANCE TYP. 6X 2337 [92.0] ELECTRICAL STUB--UP 940 [37.0] DOOR REMOVABLE CLEARANCE TYP. 2X 676 [26.6] FUEL TANK FILL CAP H 2896 [114.0] 966 [38.0] 1778 [70.0] 914 [36.0] TYP. 2X 86 [3.4] 2743 [108.0] 762 [30.0] 2743 [108.0] 356 [14.0] 1931 [76.0] 394 [15.5] 1956 [77.0] 762 [30.0] TYP. 6X AIR DISCHARGE OPENING AIR INTAKE FIXED LOUVERS 1778 [70.0] 584 [23.0] 1854 [73.0] 254 [10.0] 1143 [45.0] TYP. 4X (10)22 [.9] DIA. X 33 [1.3] LONG SLOTS (SEE NOTE) 2413 [95.0] 2489 [98.0] 5080 [200.0] 900/1000REOZM Weather Enclosure ADV-6754A-B G6-69 8/07e Page 9

10 Sound Enclosure and Subbase Specifications Sound Enclosure and Subbase Est. Fuel Supply Hours Weight, kg (lb.) Dimensions, mm (in.) Capacity, at 60 Hz With Steel With Aluminum Height A, L (gal.) w/full Load Length B Max. Width Height Enclosure Enclosure mm (in.) 600REOZM Lift base 0 0 (0) 3329 (131) 7774 (17130) 6933 (15280) 0 (0) 2033 (537) (143) 9687 (21338) 8846 (19488) 305 (12) 4111 (1086) (197) 3939 (155) 9988 (22001) 9147 (20151) 610 (24) 2691 (105.9) 6136 (1621) (161) (22589) 9414 (20739) 762 (30) 8089 (2137) (204) (23208) 9696 (21358) 914 (36) 4243 (167) (3215) (292) (25546) (23696) 914 (36) Note: Refer to the enclosure/fuel tank dimension drawing ADV-6963 for dimensions not shown. Sound Enclosure and Subbase Est. Fuel Supply Hours Weight, kg (lb.) Dimensions, mm (in.) Capacity, at 60 Hz With Steel With Aluminum Height A, L (gal.) w/full Load Length B Max. Width Height Enclosure Enclosure mm (in.) 750/800REOZM Lift base 0 0 (0) 3480 (137) 9810 (21610) 8889 (19585) 0 (0) 2850 (753) (149) (27009) (24984) 305 (12) 5670 (1498) (220) 4090 (161) (27717) (25692) 610 (24) 2841 (111.8) 8528 (2253) (28647) (26622) (3001) (257) 4394 (173) (29954) (27929) 914 (36) (4484) (370) (33190) (31165) Note: Refer to the enclosure/fuel tank dimension drawing ADV-6986 for dimensions not shown. Est. Fuel Sound Enclosure and Subbase Enclosure and Supply Hours Dimensions, mm (in.) Weight, kg (lb.) Capacity, at 60 Hz w/full Height, Height H, L (gal.) Load Length Width Level 1 Level 2 mm (in.) mm (in.) 900REOZM, Enclosure Series: KP200BL1 (Sound Enclosure, Level 1), KP200BL2 (Sound Enclosure, Level 2) Lift base (29575) (30837) 3099 (122) 203 (8) 3501 (925) (260) 5486 (216) (32265) (33527) 3353 (132) 457 (18) 7002 (1850) (33590) (34852) 3759 (148) 864 (34) Note: Refer to the enclosure/fuel tank dimension drawing ADV-6754 for dimensions not shown. Est. Fuel Sound Enclosure and Subbase Enclosure and Supply Hours Dimensions, mm (in.) Weight, kg (lb.) Capacity, at 60 Hz w/full Height, Height H, L (gal.) Load Length Width Level 1 Level 2 mm (in.) mm (in.) 1000REOZM, Enclosure Series: KP200BL1 (Sound Enclosure, Level 1), KP200BL2 (Sound Enclosure, Level 2) Lift base (29575) (30837) 3099 (122) 203 (8) 3501 (925) (260) 5486 (216) (32265) (33527) 3353 (132) 457 (18) 7002 (1850) (33590) (34852) 3759 (148) 864 (34) Note: Refer to the enclosure/fuel tank dimension drawing ADV-6754 for dimensions not shown. G6-69 8/07e Page 10

11 Dimensions in [ ] are inch equivalents. See fuel tank height A and length B in table 4076 [160.5] REF 892 [35.1] 884 [34.8] ELECTRICAL STUB--UP PUNCHED AIR INTAKE OPENING (BOTTOM) PUNCHED RADIATOR DISCHARGE OPENING (TOP) 2000 [78.7] BOTH HOODS FUEL LEVEL GAUGE FUEL FILL (SHOWN w/ 26.5 LITER [7 GALLON] SPILL CONTAINMENT) SPACE HEATER 254 [10] MITERED EXHAUST OUTLET 2691 [105.9] MAXIMUM WIDTH 2350 [92.5] 1400 X 1400 [55.1 X 55.1] MOTORIZED DAMPER OR GRAVITY DISCHARGE DAMPER 19 L [5 GAL.] SPILL CONTAINMENT (EXTERNAL MOUNT; SHIPPED LOOSE) 1850 X 1645 [72.8 X 64.8] MOTORIZED INTAKE DAMPER 1750 [68.9] 850 [33.5] 2300 [90.6] 1/2 NPT BASIN DRAIN 1025 [40.4] 5050 [198.8] 1700 [66.9] VENTILATION FAN A 1650 [65.0] 3329 [131.0] 1/2 NPT OIL DRAIN 1/2 NPT COOLANT DRAIN CRANKCASE VENT 111 [4.4] B (12,170 LITER/3215 GALLON TANK SHOWN) 16 [.6] 600REOZM Sound Enclosure ADV-6963B-D G6-69 8/07e Page 11

12 Dimensions in [ ] are inch equivalents. See fuel tank height A and length B in table 4226 [166.4] REF 1225 [48.2] 892 [35.1] 884 [34.8] PUNCHED AIR INTAKE OPENING (BOTTOM) 2109 [83.0] ELECTRICAL STUB--UP FUEL LEVEL GAUGE PUNCHED RADIATOR DISCHARGE OPENING (TOP) FUEL FILL (SHOWN w/ 26.5 LITER [7 GALLON] SPILL CONTAINMENT) SPACE HEATER [12] RAIN CAP 1500 X 1750 [59 X 68.9] MOTORIZED OR GRAVITY DISCHARGE DAMPER 2841 [111.8] MAXIMUM WIDTH 2500 [98.4] 1750 [68.9] OPENING WITH 19 L [5 GAL.] SPILL CONTAINMENT (EXTERNAL MOUNT; SHIPPED LOOSE 1750 [68.9] 1/2 NPT OIL DRAIN 850 [33.5] 1/2 NPT COOLANT DRAIN 1/2 NPT BASIN DRAIN 2450 [96.5] VENTILATION FAN 1904 [74.9] 5650 [222.4] 2400 [94.5] A 3329 [131.0] 2000 X 2000 [78.8 X 78.8] MOTORIZED INTAKE DAMPER 151 [6.0] CRANKCASE VENT 111 [4.4] B (16,974 LITER/4484 GALLON TANK SHOWN) 16 [.6] 750/800REOZM Sound Enclosure ADV-6986B-B G6-69 8/07e Page 12

13 Dimensions in [ ] are inch equivalents. Note: W4 x 13 beams required at same mounting location as tank for Florida Dept. of Environmental Resources Management. See fuel tank height H in table. ELECTRICAL STUB--UP 787 [31.0] DOOR REMOVABLE CLEARANCE TYP. 6X 2337 [92.0] 940 [37.0] DOOR REMOVABLE CLEARANCE TYP. 2X 86 [3.4] 676 [26.6] AIR DISCHARGE OPENING--TOP H 2907 [114.4] J 1778 [70.0] 914 [36.0] TYP. 2X FUEL TANK FILL CAP AIR INTAKE--BOTTOM (BOTH SIDES) 2743 [108.0] 5486 [216.0] G E 1931 [76.0] F 762 [30.0] TYP. 6X 1778 [70.0] 254 [10.0] 1143 [45.0] TYP. 4X (10)22 [.9] DIA. X 33 [1.3] LONG SLOTS (SEE NOTE) 2413 [95.0] 2489 [98.0] 5080 [200.0] 6604 [260.0] SILENCER DIMENSIONS E F G J LEVEL 1 (CRITICAL) 356 [14.0] 762 [30.0] 2743 [108.0] 966 [38.0] LEVEL 2 (HOSPITAL) 415 [16.3] 1075 [42.3] 4013 [158.0] 1278 [50.3] 900/1000REOZM Sound Enclosure ADV-6754B-B G6-69 8/07e Page 13

14 KOHLER CO., Kohler, Wisconsin USA Phone , Fax For the nearest sales and service outlet in the US and Canada, phone KohlerPower.com Kohler Power Systems Asia Pacific Headquarters 7 Jurong Pier Road Singapore Phone (65) , Fax (65) Accessories Basic Electrical Package (BEP), REOZM Distribution panel/load center 120/208/240 VAC, single phase with main and 12 branch circuits. Two 3-way switches control four AC vapor-tight lights with gaskets. Two duplex GFI receptacles. All wiring in rigid conduit. Basic Electrical Package (BEP), 900/1000REOZM Load center 120/208/240 VAC, single-phase with main and 12 branch circuits. One switch controls three AC vapor-tight lights with gaskets. Two duplex GFI receptacles. All wiring in rigid conduit. Additional AC lights. Duplex GFI receptacles. Two 3-way switches. Enclosure Heater 5 kw heater, thermostatically controlled 208 or 240 VAC, single phase. DC Light Package, REOZM Four DC lights powered by the starting battery on a fused circuit with a minute and no lock-on timer. 24 VDC lights are standard. DC Light Package, 900/1000REOZM Two DC lights powered by the starting battery on a fused circuit with a minute and no lock-on timer. 24 VDC lights are standard. Additional DC lights. Miscellaneous Package Options, REOZM Mounting and wiring for battery charger. Engine block heater wiring. Panic bar for each latching door. Touch-up paint (specify spray or brush bottle). Miscellaneous Package Options, 900/1000REOZM Mounting for battery charger. Automatic door holder. Panic bar for each latching door. Control panel viewing window, 610 x 457 mm (24 x 18 in.) (weather enclosure models only). Touch-up paint (specify spray or brush bottle). 19 L (5 gal.) Fill/Spill Containment Above ground fill/spill container for fuel overfill spills during fill-up. External mount or internal mount. Florida Dept. of Environmental Protection (FDEP), REOZM FDEP approval required for fuel tank capacities greater than 249 L (550 gal.). Tank approval listed within FDEP File No. EQ-249. Leak and 90% high fuel level switch approval listed with FDEP File No. EQ-161. Above ground fill/spill container for fuel overfill spills during fill-up; 26.5 L (7 gal.) capacity. Florida Dept. of Environmental Protection (FDEP), 900/1000REOZM FDEP approval required for fuel tank capacities greater than 249 L (550 gal.). Tank approval listed within FDEP File No. EQ-228. Leak and 90% high fuel level switch approval listed with FDEP File No. EQ-161. Above ground fill/spill container for fuel overfill spills during fill-up. 19 L (5 gal.) capacity. Enclosure Design Options, REOZM Aluminum construction, 2.0 mm (0.08 in.) walls and 3.2 mm (0.125 in.) roof thickness. High wind bracing, 241 kph (150 mph). Enclosure Design Options, 900/1000REOZM Aluminum construction for weather enclosure, 2.5 mm (0.1 in.) thickness. Aluminum construction for sound enclosure, 2.5 mm (0.1 in.) thickness. Outlet hood for weather enclosure. Intake hoods for weather enclosure. Acoustic insulation, 51 mm (2 in.). Aluminum perforated liner for sound enclosure, level 1. High wind bracing, 241 kph (150 mph). Motorized Variable Damper and Ventilation Air intake and relay. Air discharge and relay. Ventilation fan, thermostat, and wiring. Gravity Air Outlet Louver External mount. Fuel Transfer System, 900/1000REOZM System electronic control module (ECM) with 15.1 Lpm (4 gpm) pump and 1/3 HP motor, solenoid valve, fuel strainer, and critical high shutdown. DISTRIBUTED BY: Availability is subject to change without notice. Kohler Co. reserves the right to change the design or specifications without notice and without any obligation or liability whatsoever. Contact your local Kohler generator set distributor for availability. 2004, 2005, 2007 by Kohler Co. All rights reserved. G6-69 8/07e Page 14