The finest cast stone dressings readily available

Transcription

1 Stone in Stock The finest cast stone dressings readily available

2 superb range of the most widely used detailing components orticrete is the UK s largest manufacturer of ast Stone, which offers you the benefits of: xpert technical advisory service available ccredited by the United Kingdom ast Stone ssociation The only ast Stone ressings to be Kitemarked by the SI Manufactured to the international quality standard S N ISO 9001:2000 Manufacturing facilities certified to the international environmental standard ISO and responsible sourcing standard S6001 ustomer satisfaction is an integral aspect of orticrete s approach and is expressed in a ustomer Service Policy Statement in the ompany s Sitework Guide ront cover Sovereign Housing ssociation, arterton, Oxfordshire 2

3 lpha Homes, Kibworth eauchamp Stone-In-Stock is a selection of the highest quality ast Stone components available off-the-shelf vailable ex-stock for collection on commercial vehicles or delivery can be arranged liminates long lead-times and high levels of stock on site esigned and dimensioned to co-ordinate with stone, brick or render Suitable for timber frame or conventional brick and block construction ll components are through coloured (homogeneous mix) vailable in ath colour range of other standard colours and components available to order Nationwide availability with local sales support orticrete ast Stone dressings are manufactured to comply with the latest ritish Standards: S: 5628 Pts 1 & S1217: S 5642: Pt 1: S 5642: Pt 2: S 8000: Pt 3:

4 orticrete ast Stone ressings These are manufactured from high grade limestone and sandstone aggregates that have been chosen for their known performance and reliable quality. The cement, pigments and waterproofing agents all conform to their appropriate ritish or uropean Standard. orticrete ast Stone ressings are created from an homogeneous mix, without using a backing material. This ensures that no undue stresses are built up within the unit. The major technical performance characteristics of orticrete ast Stone ressings exceed the requirements of S 1217 and the United Kingdom ast Stone ssociation specification. Structural properties Unless specifically stated, all cast stone units are decorative and are not designed to be load bearing. ue care and attention should be given to the differential shrinkage and expansion rates between clay and cast stone units when employed in combination. Whilst construction is taking place, all cast stone units must be supported and protected in their temporary state to negate the risk of any load being implied upon them (e.g. window heads). Mortar Mortar used for the installation of ast Stone ressings should not be stronger than esignation III (1:1:5/6). Handling reinforcement ny units over 900mm in length contain one or more handling bars. These are included to comply with Health and Safety Regulations, relating to the handling of the product by site operatives. 4

5 Regency shlar and Quoins ode Weight (Kg) Q Q Regency shlar Plain Quoins 1/3 Q2/Q5 ode Weight (Kg) Q6-135xt Plain Quoin Q6-135XT ode Weight (Kg) Q hamfered Quoins Q11 18 x 18 chamfer 5

6 Plinths ode Weight (Kg) PL PL1-90xt PL1-90Int PL1-135xt PL1-135Int PL1 PL1-90XT PL1-90INT PL1-135XT PL1-135INT orbels ode Weight (Kg) LH RH LH/RH Left hand shown When ordering please remember to specify the hand required 6

7 String course ode Weight (Kg) S S1-90xt S1-90Int S1-135xt S1-135Int S1 S1-90XT S1-90INT S1-135XT S1-135INT 135º ode Weight (Kg) S S xt S Int S xt S Int S3-40 Profile complements T1-40 & T11-40 cills 7

8 ills ode Weight (Kg) T T T T T T T T T T xt T xt Slip ill T11-40 T XT T XT combination of the above cill components are suitable for all bay window sizes however some site cutting may be necessary. 8

9 ode G Weight (Kg) T T T T T T LH RH T LH RH Stooled ill T1-40 T1-40-LH T1-40-RH G G G G ode rickwork Opening Weight Opening in render (Kg) T T T T T LH+758RH T LH+970RH T LH +1254RH Stooled ill to suit render T1-40 T1-40-LH T1-40-RH rick wall opening Opening rick wall in render opening Opening in render * Opening reduced by 30mm to allow render finish into brickwork reveals. Supplied in 2 equal pieces allowing for a 6mm joint 9

10 Heads orticrete decorative heads are non-loadbearing. ode Weight (Kg) H H H H H H H H H H H H H H H H H H Rectangular decorative head H1 & H2 10

11 ode Weight(Kg) H H H H H H LH+882RH H LH+1167RH Splayed decorative head H11 ode Max UL Weight(Kg) SH SH SH SH SH SH Structural heads SH2 WRNING! Structural heads must not be cut or drilled. Keystones ode Weight (Kg) K K K K K K4/K5 K1/K2 K2 X Supplied in 2 equal pieces allowing for a 6mm joint 11

12 rched surrounds ode R Weight (Kg) H x3 H x3 H x3+45x2 H x3+58x2 H1/H2 im. = ed dimension R H2/H4 R These surrounds are designed to be self supporting. ullseye window surrounds ode Weight (Kg) U U U1 U2 ullseye window surrounds are supplied in sections with an allowance for 5mm mortar joints. These surrounds are designed to be self supporting. 12

13 Jambs ode Weight (Kg) JU JU JU JU JU JU JU2-2090* JU2-740/890/ 1040/1190 JU2-1340/1490 JU * Supplied in two pieces. ll jambs are supplied with the appropriate ss wall ties. Gable vent ode perture Weight (Kg) GV ,650mm 2 42 G GV1 G1 13

14 aplock coping system 600 The aplock System locks together the top course of brickwork over a two metre length, forming a virtually immovable monolithic mass. This has great advantages. It adds security to parapet walls, boundary walls where vandalism may be a problem, and consequently can reduce lifetime maintenance costs. ach order is supplied with the correct amount of plastic locking insert in 2m lengths. ode Weight(Kg) LH RH STOP IR T ouble ant aplock Section 600 aplock insert foot dimension = 90mm to suit 75mm nominal course height LL/RH Left hand shown -STOP 600 -IR -T

15 opings opings and cappings should be installed in accordance with S5628: Part 3, 2005, section ode Weight(Kg) TW TW315-UR TW315-S TW315-T TW TW380-UR TW380-S TW380-T Section TW315/TW380 TW315/TW380-S TW315/TW380-UR TW315/TW380-T Moulded copings ode Weight(Kg) MTW MTW405-S MTW405-UR MTW MTW470-S MTW470-UR Section MTW MTW-S MTW-UR 15

16 Pier caps & spheres ode Pier size Weight (Kg) P x P x P x P x P x ored to suit sphere base P P Sphere S We recommend that spheres/caps be fixed in accordance with orticrete Technical ata Sheet S/SPH001, a copy of which is available on request. The spheres will be supplied with the appropriate dowel. ode IM iameter Use with cap ref Weight (Kg) S P2 14 S2 150 P3 32 S P3 61 Moulded pier caps ode Pier size Weight (Kg) MP MP MP MP Section MP1/MP2 MP1/MP2 16

17 inial sets ode iameter Weight (Kg) N1+S N2+S To suit MP1/MP2 X X X We recommend that finial sets be fixed in accordance with orticrete Technical ata sheet X S/SPH002 a copy of which is available on request. The finial sets will be supplied with the appropriate dowel. X X X X atestones ode Weight (Kg) NS NS2 Standard numerals - 125mm high (Times New Roman). 17

18 Portico kit The portico will be supplied shrink-wrapped on pallets and will contain all the necessary components. full set of constructional and component drawings will be provided on receipt of your order. The inside face of the structural ring beam has a series of threaded sockets along its length allowing you to install your own choice of roof to the enclosed portico area. The roof should be designed to shed rainwater clear from the completed portico. ode PO KIT

19 Pointing mortar Mortar used for the installation of ast Stone ressings should be as weak as possible, according to the exposure of the site, but in all cases should not be stronger than esignation III (1:1:5/6). or pointing, orticrete recommend products from the asipoint range, which are available to order as follows. Pointing asipoint Historic Mortar is a dry packed blend of lime complying with S890, GGS comprising selected silica sands and natural aggregates complying with S1200, and additives to provide water resistance, thixotropy, workability and colour. ll material is blended under quality systems conforming to ISO 9001:2000. asipoint Historic Pointing Mortar is available in 12.5kg tubs. product and technical datasheet for this product is available on request. dditional accessories or the easy application of this product, orticrete also offers the following: Product ode Pointing Gun (complete with tube and nozzle) 301 Nozzle 302 Tube 303 problender 5mm restrictor nozzle

20 omplementary products for detailing, roofing & landscaping nstone and Shearstone walling stone Tel: ax: mail: nstone rown Old Weathered Pitched and ast Stone dressings in ath at Whitehouse Loan, dinburgh orticrete roofing products Tel: ax: mail: mber Hardrow Slates uets on harles hurch Homes, Staynor, near Selby Kiveton Walling Tel: ax: mail: Kiveton Natural Raked attered Walling at nstone, Kiveton Park, Sheffield Order your Stone in Stock from: pproved stockist ast Stone enquiries: orticrete Limited, nstone, Kiveton Park Station, Kiveton Park, Sheffield S26 6NP Tel: ax: mail: The information contained within this publication is as accurate as possible at the time of going to press. However, this document does not form part of any contract and orticrete cannot accept liability for any errors or omissions. In order to maintain its position as a market leader, orticrete operates a policy of continuous product development and therefore reserves the right to alter specifications without notice. Information on the complete range of orticrete products can be found on the Internet at orticrete, uets and Hardrow Slates uets are registered trademarks of orticrete Ltd. RH is a registered trademark of RH plc. Kiveton Walling, Stone In Stock and Shearstone are trademarks of orticrete Ltd. nstone and aplock are registered trademarks of Ibstock rick Ltd. orticrete Ltd MMR UNIT KINGOM ST STON SSOITION MS M S1217:1997 ast Stone