3D Laser Scanning & Digital Historic Preservation
|
|
|
- Byron Walters
- 10 years ago
- Views:
Transcription
1 Association Preservation Technology Int. APT Denver 2010 Heritage Partnerships Program Intermountain Regional Office National Park Service U.S. Department of Interior 3D Laser Scanning & Digital Historic Preservation Tom Keohan, Historical Architect, Intermountain Region, National Park Service, , Justin Barton, Technical Services Manager, CyArk, , Mike Nulty, Technical Coordinator, College of Architecture and Planning, Center for Preservation Research, ,
2 Association Preservation Technology Int. APT Denver 2010 Heritage Partnerships Program Intermountain Regional Office National Park Service U.S. Department of Interior LIDAR Light Detection And Ranging Light detection time of flight; R=tx 50,000 points per second Phased Base 500,000 points per second Airborne Laser Swath Mapping LIDAR Contour Mapping
3 Association Preservation Technology Int. APT Denver 2010 Heritage Partnerships Program Intermountain Regional Office National Park Service U.S. Department of Interior Land Survey Buildings Ground Surfacing Collision Detection & Conflict analysis
4 Association Preservation Technology Int. APT Denver 2010 Heritage Partnerships Program Intermountain Regional Office National Park Service U.S. Department of Interior BIM Meta Data Complex Buildings AutoDesk Revit Vector/2D Line Drawings High Degree of Accuracy Level of Detail & High Quality
5 Association Preservation Technology Int. APT Denver 2010 Heritage Partnerships Program Intermountain Regional Office National Park Service U.S. Department of Interior Conservation/Preservation Existing Condition Condition Assessment & Condition Monitoring Interpretation/Visualization Tool Historic Documentation
6 Building a Sustainable Model for Cultural Heritage Documentation Justin Barton Technical Services Manager CyArk [email protected] Mike Nulty Technical Coordinator Center of Preservation Research [email protected]
7 CyArk
8 CyArk Methodologies
9
10 Center of Preservation Research (CoPR) University of Colorado Denver UCD CAP CoPR MSHP researching the past, understanding the present and informing the future. interdisciplinary approach to investigating and participating in the preservation of built environments, cultural and natural landscapes and cultural heritage.
11 At the Center of Preservation Research and the College of Architecture and Planning at the University of Colorado Denver, we are: Redefining historic preservation and cultural heritage in the context of the landscapes of the American West. Educating the next generation of historic preservationists. Preserving the past and examining the present to prepare for the future of our cities, suburbs, rural lands, and even our wildlands. Developing the use of cutting edge technology and research. Partnering with key organizations throughout the Mountain West, the United States, and the world.
12 Laramie Fort Laramie Cheyenne, WY Fort Laramie National Historic Site
13
14 1867
15
16 1863 by Charles Moellman
17 Developing the use of cutting edge technology and research.
18 Fort Laramie: Phase I (CoPR and NPS) 3-D SketchUp Models
19 Parade Ground Vista from Post Hospital View from Hospital Barracks Interiors University of Colorado - Denver Colorado Preservation Inc.
20 Fort Laramie: Phase II (CoPR, NPS, and CyArk) UCD NPS Gaining new technology and capacity CyArk Establishing a technology center Preserving Cultural Heritage Sites through collecting, archiving and providing open access to data created by laser scanning, digital modeling, and other state-of-the-art technologies.
21 Building a sustainable model for cultural heritage documentation Establishing Fort Laramie as a pilot project Drawing on CoPR's initial work at the site Exploring how the CyArk SiteManager system could be used to pull together existing data The benefits of applying new technologies to a heavily studied site. (comparison of HABS drawings with data created by scanning) Capacity Building through a Technology Center
22 Fort Laramie Pilot Project
23 Documentation -- discovery through research and site work and the recording of this provides knowledge and meaning relevant to making preservation decisions for the future. Telling the stories keeps the narratives of our history and our sites alive.
24 Training
25 Data Processing Post Hospital Model Cyclone Software
26 2D CAD Drawings
27 Virtual Tours
28 CyArk s Site Manager
29
30
31
32
33 It [historic environment] has shaped the places where we live and work and is fundamental to the quality of life. It is one of the most accessible of historic narratives. Like other aspects of the environment, the historic environment deserves our most thoughtful care. Sir Neil Cossons 2001
LITCHFIELD PUBLIC SCHOOLS Core Curriculum Scope and Sequence {Interior Design}
LITCHFIELD PUBLIC SCHOOLS Core Curriculum Scope and Sequence {Interior Design} CT Frameworks/ Standards Content and Skill Objectives Students will be able to: Assessments Resources Architecture 2-3 weeks
BANGALORE METRO RAIL CORPORATION LIMITED
BANGALORE METRO RAIL CORPORATION LIMITED Application for Contract Appointment for the post of : Asst Executive Engineer (Track) Sl. Passport size photograph 1. Name Address Phone / Mobile Email id 2. Father
3D Laser Scanning For Digital Modeling & Documentation
3D Laser Scanning For Digital Modeling & Documentation Company Profile Direct Dimensions is dedicated to tackling the most difficult challenges with the most advanced 3D technologies available. Direct
JEDDAH HISTORICAL BUILDING INFORMATION MODELING "JHBIM" OLD JEDDAH - SAUDI ARABIA
JEDDAH HISTORICAL BUILDING INFORMATION MODELING "JHBIM" OLD JEDDAH - SAUDI ARABIA A.Baik a,, J. boehm b, S. Robson c a Dept. of Geomatic Engineering, University College London, Gower Street, London, WC1E
Laser Scanning Clinton's Ditch: High Tech HAER Documentation along the Erie Canal
Historic American Engineering Record NPS Heritage Documentation Programs Laser Scanning Clinton's Ditch: High Tech HAER Documentation along the Erie Canal World Canals Conference Rochester 23 September
Digital Arts (Visualization) Technology Certificate Program
Digital Arts (Visualization) Technology Certificate Program Program Description 184 Course Hours of Instruction Program Completion Time - 9 Months Upon Completion VDCI Technology Certificate Awarded DIGITAL
Historic Rehabilitation Tax Credits: Using the New State Credit and the Federal Tax Credit
: Using the New State Credit and the Federal Tax Credit San Antonio Workshop Valerie Magolan, MSHP Tax Credit Program Specialist, Texas Historical Commission May 29, 2015 Tax credits are among the most
From 3D Laser Scanning to Revit. Processes, Products and Questions
From 3D Laser Scanning to Revit Processes, Products and Questions Topics Scanning Overview Recommended Processes Best Practices Up-front questions to ask Tools and Technologies, including the new Scan
BIM and DWF REVIT BUILDING INFORMATION MODELING. About DWF. BIM and DWF
REVIT BUILDING INFORMATION MODELING BIM and DWF This white paper explores how DWF technology extends the building information modeling (BIM) design process and facilitates the sharing of the consistent,
Innovative capture and modeling of existing building conditions using 3D laser scanning. Entry B Submission
Innovative capture and modeling of existing building conditions using 3D laser scanning Entry B Submission Executive Summary As a large owner organization, understanding and developing new technologies
a) Budget. The City of Fort Collins requests $100,000 to design and plan the Rocky Mountain
Applicant: City of Fort Collins, Colorado, Fort Collins, CO. Project: Planning and Development of Rocky Mountain Regional Arts Incubator Details of the Project City of Fort Collins Cultural Services a)
BIM Extension into Later Stages of Project Life Cycle
BIM Extension into Later Stages of Project Life Cycle Pavan Meadati, Ph.D. Southern Polytechnic State University Marietta, Georgia This paper discusses the process for extending the implementation of the
SRISHTI TECHNICAL SERVICES L.L.C
SRISHTI TECHNICAL SERVICES L.L.C Coming under SRISHTI Group. is a team of experienced and qualified skilled specialists that provide expertise in Interior fit outs & BIM along with having a full qualified
Point Clouds-To-BIM For Sustainability
Point Clouds-To-BIM For Sustainability Cliff Moser, AIA 35 years in the Design and Construction Industry. VP BIM Services Neilsoft (www.neilsoft.com) Past Chair of ASQ Design and Construction Division
Advisory Council On Historic Preservation
Advisory Council On Historic Preservation The Old Post Office Building 1100 Pennsylvania Avenue, NW, #809 Washington, DC 20004 MEMORANDUM OF AGREEMENT AMONG THE U.S. DEPARTMENT OF HOUSING AND URBAN Al'ID
In Flight ALS Point Cloud Georeferencing using RTK GPS Receiver
Integration of Geodetic Sensors In Flight ALS Point Cloud Georeferencing using RTK GPS Receiver Yannick Stebler, Philipp Schär, Jan Skaloud, Bertrand Merminod E mail: [email protected] Web: http://topo.epfl.ch
Turner Innovation Series BIM Conference Istanbul May 2012. Brian Krause, Dan Gramer, Turner Construction Company
1 Why BIM? Excessive Re-Work and Waste TURNER INNOVATION SERIES May 2012 BIM for Design, Preconstruction, & Construction Brian Krause Manager, Integrated Building Solutions [email protected] Value Value
MicroStation to SketchUp
Feature MicroStation to SketchUp by Keith West, DesignCAD Pty Ltd SketchUp SketchUp is a computer application (software) developed originally by a group of professionals from the architecture and engineering
Design without compromise. Autodesk Revit. Architecture
Design without compromise. Autodesk Revit Architecture Definitive Design From conception to construction documentation, design projects within an intuitive environment. Building information modeling and
IMPERVIOUS SURFACE MAPPING UTILIZING HIGH RESOLUTION IMAGERIES. Authors: B. Acharya, K. Pomper, B. Gyawali, K. Bhattarai, T.
IMPERVIOUS SURFACE MAPPING UTILIZING HIGH RESOLUTION IMAGERIES Authors: B. Acharya, K. Pomper, B. Gyawali, K. Bhattarai, T. Tsegaye ABSTRACT Accurate mapping of artificial or natural impervious surfaces
OUTLINE SCOPE OF SERVICES FOR THE ROLE OF INFORMATION MANAGMENT
OUTLINE SCOPE OF SERVICES FOR THE ROLE OF INFORMATION MANAGMENT first edition 2013 The CIC acknowledges the technical input and leadership provided by the BIM Task Group in support of the production of
AEC Document Control with SharePoint & Office 365
AEC Document Control with SharePoint & Office 365 RFI, Transmittal & Submittal Management Today s Presentation Introduction About Gig Werks & AEC Expertise Challenges Facing the AEC About ProjectReady
BIM Project Management Professional (PMP) Technology Certificate Program
BIM Project Management Professional (PMP) Technology Certificate Program Program Description 164 Credit Hours of Instruction Program Completion Time - 6 Months Upon Completion VDCI/cadteacher Technology
Autodesk Revit Architecture. Design without compromise.
Autodesk Revit Architecture Design without compromise. Definitive Design From conception to construction documentation, design projects within an intuitive environment. Building information modeling and
Welcome to Historic Preservation at Ursuline College! Mathews House project
Welcome to Historic Preservation at Ursuline College! Mathews House project Our mission is to prepare tomorrow s leaders to make sustainable and unique contributions to their world by preserving cultural
BIM and Visualization
REVIT BUILDING INFORMATION MODELING BIM and Visualization This white paper explores how building information modeling using the Revit platform with Autodesk 3ds Max can be used to explore, validate and
CAREER LYNX Constructing Careers in Architecture
Students will understand the job description, skills, and education of various Architecture and Planning related jobs. Students will use the newspaper to make inferences about the role of various professionals
BIM Department. BIM Modeling Using Faro Focus3D Laser Scanner
BIM Modeling Using Faro Focus3D Laser Scanner Contents What is Laser Scanning? Advantages of Laser Scanning BIM Workflow Process Scanner Unit Set-up and Scanning Processing Scan Files BIM Software Creating
Blended Learning: Revit Collaboration Tools
Blended Learning: Revit Collaboration Tools Course Length: 1 week Autodesk Revit is a Building Information Modeling (BIM) tool, which can be used by more than one person working on a new project. This
Active and Passive Microwave Remote Sensing
Active and Passive Microwave Remote Sensing Passive remote sensing system record EMR that was reflected (e.g., blue, green, red, and near IR) or emitted (e.g., thermal IR) from the surface of the Earth.
Guidelines to create Building Information Modelling (BIM) models for AAP, P1, SOM & SPC
Appendix 5 Guidelines to create Building Information Modelling (BIM) models for AAP, P1, SOM & SPC Preparation for Architectural Assessment Panel(AAP) Submission (Same details requirements on Revit models
Autodesk Design Visualization for Architects. Every Design Has a Story.
Autodesk Design Visualization for Architects Every Design Has a Story. A high-impact visualization can make the difference between winning a bid or walking away empty-handed. Architects, designers, engineers
7 STEPS FOR A SUCCESSFUL HISTORIC PRESERVATION PROJECT
7 STEPS FOR A SUCCESSFUL HISTORIC PRESERVATION PROJECT by Michele Barker, Historic Preservationist, Preservation Massachusetts So you have a historic building town hall, church, school, home and you want
Request for Proposal Autodesk CAD Support
Request for Proposal Autodesk CAD Support Introduction Denver Water is inviting your firm to submit a proposal to provide Autodesk product-based services and support to meet the requirements of Denver
Explore. Analyze. Optimize. AutoCAD. Civil 3d
Explore. Analyze. Optimize. AutoCAD Civil 3d A Powerful Building Information Modeling Solution for Civil Engineering Use an integrated process built on a coordinated, consistent, digital model for design,
SDI Program at the University of Chicago. Scott Stocking, GISP Facilities Services Department
Scott Stocking, GISP Facilities Services Department Discussion Outline University/Facilities Services The Story Begins Major Components of SDI Program Support Operations Current & Future Conceptual Design
Explore. Analyze. Optimize. AutoCAD. Civil 3d
Explore. Analyze. Optimize. AutoCAD Civil 3d A Powerful Building Information Modeling Solution for Civil Engineering Use an integrated process built on a coordinated, consistent, digital model for design,
Structural BIM Technology Certificate Program
Structural BIM Technology Certificate Program Program Description 160 Credit Hours of Instruction Program Completion Time - 6 Months Upon Completion VDCI/cadteacher Technology Certificate Awarded STRUCTURAL
I N S T R U C T I O N S
Office of Archaeology and Historic Preservation History Colorado Publication #1322c APPLICATION FOR COLORADO STATE INCOME TAX CREDIT FOR HISTORIC PRESERVATION (RESIDENTIAL PROPERTY) Pursuant to House Bill
OPEN BIM Collaboration Pilot: The Faith Lutheran College Secondary School
OPEN BIM Collaboration Pilot: The Faith Lutheran College Secondary School Fulton Trotter Architects Overview The Faith Lutheran College Secondary School is located in the suburb of Plainland one hour West
Yellowstone National Park. Yellowstone National Park. Why is Yellowstone important?: Features. Why is Yellowstone important?
Yellowstone National Park Yellowstone National Park 1800s 1916 Discovery Protection Development Why is Yellowstone important? Historical significance First US and World National Park Established in 1872
WYOMING STATE PROTOCOL APPENDIX I GLOSSARY
WYOMING STATE PROTOCOL APPENDIX I GLOSSARY Advisory Council on Historic Preservation (ACHP) Established by the National Historic Preservation Act (1966), the ACHP is an independent executive agency that
Preserve America Youth Summit
Summary Preserve America Youth Summit December 2006 Presented by The History Channel Save Our History Save Our History, The History Channel philanthropic initiative to support history education, historic
For Historically Designated Homes & Buildings
Ninth Street Historic Park Acknowledgements This project was paid for in part by a State Historical Fund grant from the Colorado Historical Society. The contents contained herein do not necessarily reflect
Building Information Modeling (BIM) Requirements for PT Projects Today s Capabilities for a BIM based Design
Building Information Modeling (BIM) Requirements for PT Projects Today s Capabilities for a BIM based Design Florian Aalami CEO ADAPT Corporation [email protected] What is BIM? The ability to model
INTEGRATING BIM AND GIS FOR ASSET MANAGEMENT
INTEGRATING BIM AND GIS FOR ASSET MANAGEMENT Andy Chan MHKIBIM Project Manager Spatial Technology Limited Agenda Introduction of Asset Management Why GIS is not sufficient for Asset Management Data model
E Courses. On Line Certificate Programs. Classroom, Workshop and Training Courses
Catalog of E Courses On Line Certificate Programs Classroom, Workshop and Training Courses Last updated: 8/13/09 Page 0 Working as a Park Board Member: The Basics Working as a Park Board Member: Being
ENGINEERING AND TECHNOLOGY DEPARTMENT
ENGINEERING AND TECHNOLOGY DEPARTMENT Engineering and Technology Education focuses on technological knowledge and competence. It is designed to help students understand and to participate in the technological
SHOALS Toolbox: Software to Support Visualization and Analysis of Large, High-Density Data Sets
SHOALS Toolbox: Software to Support Visualization and Analysis of Large, High-Density Data Sets by Jennifer M. Wozencraft, W. Jeff Lillycrop, and Nicholas C. Kraus PURPOSE: The Coastal and Hydraulics Engineering
3D CAD Technology Certificate Program
3D CAD Technology Certificate Program Program Description 160 Credit Hours of Instruction Program Completion Time - 6 Months Upon Completion VDCI/cadteacher Technology Certificate Awarded 3D CAD Today,
Key features. Good architecture deserves Daylight Visualizer. Any project, any scale. Photo-realistic and false colour images
Daylight Visualizer Good architecture deserves Daylight Visualizer Key features VELUX Daylight Visualizer is a professional simulation tool for the analysis of daylight conditions in buildings. It is intended
Tesla Outsourcing Services An Architectural & Engineering Company
Tesla Outsourcing Services An Architectural & Engineering Company Offices Our Spread USA UK Office India Office Canada Office Australia Office JBH-Tesla Design Group, Inc. 100 Executive Boulevard-Suite
Coming To An Airport Near You
Airport GIS Data & ealp Coming To An Airport Near You Kevin Shirer, AAE Project Manager Association of California Airports; September 2009 Today s Presentation & Expectations Take away Basic knowledge
BIM IN LANDSCAPE ARCHITECTURE: OPPORTUNITIES AND CHALLENGES
INTRODUCTION Curious about how Building Information Modeling (BIM) affects the profession? Hear an honest assessment about the benefits and challenges of BIM from professionals using related software as
Application of airborne remote sensing for forest data collection
Application of airborne remote sensing for forest data collection Gatis Erins, Foran Baltic The Foran SingleTree method based on a laser system developed by the Swedish Defense Research Agency is the first
Laser Scanning for an Integrated BIM
Laser Scanning for an Integrated BIM By: Duane Gleason Lake Constance 5D-Conference 2013 Constance, 28th-29th of October Introduction The application of laser scanning technology has been popular in the
Holes & Selective Laser Sintering
SLS is one of the most accurate 3D printing processes. The process has a layer thickness of 0.1mm. This is the thickness with which a new layer is added to each part. In any direction therefore the maximum
Building Information Modeling/Vertical Digital Construction: Teaching Strategies and Preparing Students for the Workforce
Building Information Modeling/Vertical Digital Construction: Teaching Strategies and Preparing Students for the Workforce Sofia Vidalis Associate Professor of Civil Engineering at Penn State Harrisburg
3D Model of the City Using LiDAR and Visualization of Flood in Three-Dimension
3D Model of the City Using LiDAR and Visualization of Flood in Three-Dimension R.Queen Suraajini, Department of Civil Engineering, College of Engineering Guindy, Anna University, India, [email protected]
Designing Complete Environments
Hart Howerton is a team of architects, planners, landscape architects, and interior designers. Our Firm s practice is designing complete environments exceptional places, communities, buildings, and landscapes
3D-Printing and Stereolithography powerful manufacturing tools for textured or high-precision 3D city models
3D-Printing and Stereolithography powerful manufacturing tools for textured or high-precision 3D city models Carsten Tille & Hermann Seitz caesar, Bonn (Germany) Rapid Prototyping Layer-by-layer fabrication
Effective Collaboration using Revit Structure and AutoCAD MEP
REVIT STRUCTURE Effective Collaboration using Revit Structure and AutoCAD MEP This white paper explains how structural engineers using Revit Structure software and mechanical/electrical/plumbing (MEP)
Building Information Modeling Management To Facility Management
To Building Information Modeling Management To Facility Management I: INTRODUCTION - aaecs Team Thomas J. Jeff Prine, CCM, LEED AP COO Program / Facility Management Specialist Bonnie K. Gorman, Assoc.
Certified Instructors & Curriculum
Our Promise. TPM is dedicated to provide the most extensive and high-quality training programs to help you maximize your investment. Although the investment in time and money may seem substantial, it will
ARCHIVING ARCHAEOLOGY: INTRODUCING THE GUIDES TO GOOD PRACTICE
ARCHIVING ARCHAEOLOGY: INTRODUCING THE GUIDES TO GOOD PRACTICE Jenny Mitcham Kieron Niven Julian Richards Archaeology Data Service ABSTRACT This paper looks at some of the domain specific preservation
Mapping Solar Energy Potential Through LiDAR Feature Extraction
Mapping Solar Energy Potential Through LiDAR Feature Extraction WOOLPERT WHITE PAPER By Brad Adams [email protected] DESIGN GEOSPATIAL INFRASTRUCTURE November 2012 Solar Energy Potential Is Largely
Implementing & Managing Revit
Implementing & Managing Revit ArcSource Lessons From The Trenches Presented by Dave Monk and Frederick Regala Context: IT Trends in Architecture Project data explosion continues Revit getting major traction
Supplemental Questionnaire CIVIL AND ARCHITECTURAL DRAFTING AND DESIGN INSTRUCTOR FULL-TIME #14-57
Supplemental Questionnaire CIVIL AND ARCHITECTURAL DRAFTING AND DESIGN INSTRUCTOR FULL-TIME #14-57 Please note: It is your responsibility to make sure that all requested information is provided on this
Call for Proposals: Building a Place for History: 2016 NJ History and Historic Preservation Conference
Call for Proposals: Building a Place for History: 2016 NJ History and Historic Preservation Conference Help shape the 2016 NJ History and Historic Preservation Conference. Submit proposals for sessions
2012 BIM Guidelines and Standards (Rev. 00) University at Albany
A. Building Information Modeling (BIM) Guidelines: The Office of AECM will require the submission of BIM modeling files as part of an electronic file submission to the AECM project manager as requested
DIA Survey Requirements. Thomas Breitnauer, PLS [email protected] DIA Land Surveyor December 10, 2014
DIA Survey Requirements Thomas Breitnauer, PLS [email protected] DIA Land Surveyor December 10, 2014 Survey Requirements - During Pre-Construction meeting - Contractor should receive a survey
Questions and Answers
AUTODESK IMPRESSION 3 Questions and Answers Contents 1. General Product Information... 2 1.1 What is Autodesk Impression?... 2 1.2 Who uses Autodesk Impression?... 2 1.3 What are the primary benefits of
Hexagon Ventures offers the next generation of smart solutions for business verticals.
1 2 Hexagon Geosystems offers products and services from leading brands such as Leica Geosystems. solutions are trusted worldwide to capture, analyse, and present spatial information. Hexagon Geospatial
3Dcities INDIA. www.3dcindia.com. Architecture and Engineering Outsourcing Company since 1999
3Dcities INDIA Architecture and Engineering Outsourcing Company since 1999 www.3dcindia.com We are an India based organisation provides a range of products and services linked to our core discipline of
Contact Name Ato Apiafi Architects Architecture Architecture Yes Architectural, Mechanical, Electrical, Civil, Structural. Type of Services Offered
Ato Apiafi Architects Architecture Architecture Autoscan, Inc. Drafting and CAD Services Architectural, Mechanical, Electrical, Civil, Structural Jeff McNabb [email protected] Bayley Construction
Water Conservation Field Services Program and WaterSMART Grants
Water Conservation Field Services Program and WaterSMART Grants Presentation Overview Background: Agency Structure and Mission Reclamation Grant Programs Water Conservation Field Services Program (Phoenix
TIMMS : FAST, ACCURATE & COST-EFFECTIVE INDOOR MAPPING
TIMMS : FAST, ACCURATE & COST-EFFECTIVE INDOOR MAPPING Designed for ease-of-use and maneuverability, TIMMS is a high-productivity tool for accurately measuring, georeferencing and modeling interior spaces
