GENERAL ELECTRIC ASSETS OF PLANT CLOSED

Transcription

1 PLANT CLOSED BID IN-PERSON OR ONLINE WITH BIDSPOTTER.COM NIAGARA 400-TON X 14' HYDRAULIC PRESS BRAKE CINCINNATI 300-TON HYDRAULIC PRESS BRAKE (5) SALVAGNINI METALFORMING LINES OF 5 ASSETS OF GENERAL ELECTRIC 1114 Old Concord Rd. in Salisbury, NC Mebane, NC is Selling in Salisbury Salisbury Inspection: Day prior to auction from 9AM - 4PM WEDNESDAY, JULY 31ST AT 10AM Mebane equipment will be sold at the Salisbury auction by photo. Inspection: by appointment only - contact Christopher Lee (513) W. 12th Street in Houston TX THURSDAY, AUGUST 1ST AT 10AM Inspection: Day prior to auction from 9AM - 4PM BCP A AUTOBLAST SYSTEM MINSTER 60-TON PIECEMAKER STRAIGHT SIDE PRESS HERR INDUSTRIAL 7-STAGE WASH LINE Myron Bowling Auctioneers Inc. P.O. BOX 369 ROSS, OHIO PH (513) / FAX (513) INTERNET: Cincinnati Industrial Auctioneers Inc DUNLAP ST., CINCINNATI, OHIO PH (513) / FAX (513) INTERNET:

2 GENERAL ELECTRIC WEDNESDAY, 7/31 SALISBURY, NC SALVAGNINI C1 HYDRAULIC SHEAR SALVAGNINI S-4 PUNCHING-SHEAR SYSTEM SALVAGNINI P-4 PANEL BENDER SALVAGNINI H2 9L4-9 9-POSITION MATERIAL LOADER SALVAGNINI S-4-30 PUNCHING-SHEAR SYSTEM SALVAGNINI 2524 P-4 PANEL BENDER SALVAGNINI P-4 PANEL BENDER COLGAR HYDRAULIC PRESS BRAKE SALVAGNINI CANDY PRESS DOALL VERTICAL BAND SAW (5) SALVAGINI LINES SALVAGINI C1 Hydraulic Shear, 110" x 55" Max. Sheet Size,.123" Max. Shear, Automatic Pusher System, (7) Unloading Stations w/44.5" x 88" Roller Racks, Rail Mounted Transfer Car, (12) Additional 44.5" x 88" Storage Racks, (2) Scrap Collector Cars. Lines 1-4 each have (22) punch stations w/twist out embossing stations & PC Controls w/emulator & RSX11M BRIDGEPORT SERIES LL 4-HP VERTICAL MILL Operations System Line 1 (2) 44.5" x 88" Loader Storage Racks w/(1) 44.5" x 9' Loader w/hydraulic Lift & Vacuum Load System S-4, S/N 75 P- 4, S/N 33020: Capable of (4) 203mm Bends, Post Embossing Press w/(7) Tools Line 2 Single Storage Rack, w/loader & Vacuum Loader S-4, S/N 76:.060" Thickness, Accumulator Storage Area P-4 Model (small): 127mm Max. Bend Transfer Conveyors Line 3 (2) Storage Racks & Loader w/vacuum Loader System S-4, S/N 77:.123" Max. Transfer Conveyors to Line 4 or to COLGAR Hydraulic Press Brake, 133" Overall, 103" Between Housings, 7" Throat, Auto Feed Table, (5) Tool Line 4 Single Storage Rack, Loader & Vacuum Loader System S-4, S/N 78:.053" Capacity Transfer Conveyor - Candy Press w/die, Adjustable for Parts 1" to 25" Long, (6) Depths.2" to.97" Front Unloader System Chip Conveyor Line 5 (1992) 9-Position Material Loader, Model H2 9L4-9, S/N 47, 5' x 10' Capacity, 140 KG Max. Cap. Transfer Conveyor S-4-30, S/N 328: H4 Head, (24) 7-Ton Punch, (12) 20-Ton Punch, (2) Indexing Station & Shear, Bristle Brush Table (3) Transfer Sections w/destocker P-4, S/N 390, Model 2520: 202mm Max. Bend Depth (Finished Box 30" x 8" x 88") Unload Station w/(3) Vibratory Feed Bowls & Insert Tooling PRESS BRAKE NIAGARA 175-Ton Hydraulic Press Brake, Model HD , S/N 51709, 10" Stroke, 7" Closed Height, 1/2" x 6' - 1/4" x 10' Capacities, Hurco Autobend 7 30" Back Gage Control PRESSES & RELATED MINSTER 60-Ton Piecemaker Straight Side Press, Model P , S/N P , 3" Stroke, 13.5" Shut Height, 3" Slide Adj., Air Clutch, PRE Slide Feeder, Model R212-5PR-101, S/N , Minster Press Controls, 36" x 25" Bolster HEIM 160-Ton OBI Press, Model 16GSPEC, S/N 3255, 4" Stroke, 17" Shut Height, 6" Slide Adj., 40-SPM, 50" 31" Bolster, Air Clutch, Palm Control PRECISION FLEXOPRESS 60-Ton OBI Press, Model SA60-32X24, S/N , 9" - 12" Shut Height, SPM, 32" x 24" Die Area, Press Room Equipment Slide Feeder, Model S20-6X18L, S/N , Air Clutch STRIPPIT FABRICENTER 22-Ton CNC Turret Punch Press, Model FC1000, S/N , 40" x 100" Roller Ball Table, (2) Holddowns, Dynapath Delta CNC Control STRIPPIT Super 30/40 Turret Punch Press, S/N , 33" Throat, 72" x 48" Table (2) Full STRIPPIT Punch Die Cabinets 2

3 GENERAL ELECTRIC WEDNESDAY, 7/31 SALISBURY, NC 1 OF 2 NIAGARA HYDRAULIC PRESS BRAKE (2) FEDERAL RESISTANCE WELDERS NORDSON POWDER COAT BOOTH 1 OF 2 MINSTER 60-TON PIECEMAKER STRAIGHT SIDE PRESS PRECISION FLEXOPRESS 60-TON OBI PRESS SULLAIR MODEL LS-20 & 20S-100H WCAC AIR COMPRESSORS OF 4 (2) 5-TON X 47' SPAN BRIDGE CRANES HYSTER S120FT 12,000-LB. FORKLIFT (4) HYSTER S60FT 6,000-LB. FORKLIFTS ROWE 10" Straightener, Model A10- C2000J,.020" Min " Max. NORWALK 7,500-lb. & 5,000-lb. Uncoilers, 51" Diameter WELDERS & RELATED Robotic Resistance Welding Station, (1) Roman 120-KVA & (1) Roman 80- KVA Transformers, (6) Spot Weld Tips, 36.5" x 26' & 17" x 10' Roller Tables, (2) Scissor Lift Tables Robotic Resistance Welding Station, (1) 120-KVA Roman & (4) 85-KVA Roman Transformers, (7) Spot Weld Positions, 36" x 9' Unloading Table w/chain Feed, WTC Technitron T2050 Control (2) FEDERAL 150-KVA Resistance Welders, Model DCPA-2-12/20, 18" Throat w/cooled Tips, 32" x 9' Bristle Brush Table, 15" x 10' Roller Conveyor GRINDERS BROWN & SHARPE 612 Micromaster Surface Grinder, S/N , 6" x 12" Electro Magnetic Chuck, Neutrofier Control, Hand Feeds, Torit Dust Collector, Model 54DC, S/N G6294 DOALL Hydraulic Surface Grinder, Model , S/N , 10" x 30" Electro Magnetic Chuck, Walker Smart 3D Chuck Control, Auto & Hand Feeds, Coolant SAWS JOHNSON 9" x 16" Horizontal Band Saw, (2) 12" x 8' Roller Conveyor DOALL Vertical Band Saw, Model , S/N , 20" Throat x 13" Opening, 26" x 26" Tilt Table, FPM, DBW-15M Blade Welder MILLS DOALL Horizonal Mill, S/N , 40-Taper Spindle, 12" x 52-3/4" T-Slot Table BRIDGEPORT Series II 4-HP Vertical Mill, S/N 2585, 11" x 58" T-Slot Table, 50-3,500 RPM, Sony Millman 2-Axis DRO (2) BRIDGEPORT 1-HP Vertical Mills, 9" x 42" T-Slot Table, Bridgeport Table Feed, RPM, Anilam Wizard Axis DRO INSPECTION 24" x 48" x 10" Granite Surface Plate w/stand Angle Plates 12" x 90" Universal Machining Plate B&S 24" Dial Height Gage OD & ID Mics Protractor Gages Radius Gauges WASTE WATER TREATMENT SYSTEM Complete Waste Water Treatment System w/(4) DI Tanks, (3) 2,600- Gallon Chemical Tanks, Pacific Filter Press, Model P630E132A-3C, S/N 804, 3 Cu/Ft Capacity, Sludge Collector & Clarifier POWDER COAT LINE NORDSON Powder Coat Booth, 36" x 58" Openings, Reclaim System (no guns or gun control) WASH SYSTEM / OVEN 1985 JR GREENE Stainless Steel Wash Line, S/N 85021, 80' Length, 44" x 48" Openings, 5-Stage Wash, 5,700,000 BTU, 40' Blowoff Booth GEORGE KOCH SONS Single Pass Oven, S/N , Infrared & Gas, 20" x 52" Opening Approx. 500' Monorail Conveyor 15" x 10' Roller Conveyor FORKLIFTS 2006 HYSTER 12,000-lb. Forklift, Model S120FT, LP, Solid Tires, 208" Lift, Triple Stage Mast, 5-Way Hydraulics, w/cascade Roll Clamp (4) 2006 HYSTER 6,000-lb. Forklifts, Model S60FT, LP, Solid Tires, Triple Stage Mast, Side Shift, 3-Way Hydraulics, up to 190" Lift (2) 2007 HYSTER 5,000-lb. Forklifts, Model S50FT, LP, Solid Tires, 191" & 192" Lift, Triple Stage Mast, Side Shift, 3-Way Hydraulics MATERIAL HANDLING (2) 5-Ton x 47' Span Double Girder Bridge Cranes, Top Running Bridge w/underhung Hoist, Remote GORBEL 3-Ton & ABELL HOWE 1/4- Ton x 10' Arm Pedestal Jibs CAROLINA CRANE 1/2-Ton x 6' Spreader Beams, Model , S/N (2) CAROLINA 500-lb.Crane Coil Hooks DAYTON 1,000-lb. Die Lift Several Scissor Lift Tables to 2,000-lb. Metro Racking 24" Flexible Roller Conveyor AIR COMPRESSORS SULLAIR Model LS-20 & 20S-100H WCAC Air Compressors CHILLERS (3) DUNHAM BUSH Chiller Systems, 204-HP, 100-Ton Space Cooling & FSS Chill Water, R22, Indoor Units. (2) Model 204 UPHF & (1) Model 204 PHF MEBANE EQUIPMENT WILL BE SOLD AT THE SALISBURY AUCTION BY PHOTO. Inspection: by appointment only contact Christopher Lee (513)

4 GENERAL ELECTRIC WEDNESDAY, 7/31 SALISBURY, NC 5 OF 19 JR GREENE STAINLESS STEEL WASH LINE DAKE 50H 50-TON SHOP PRESS (19) VIDMAR CABINETS W/TOP CABINETS INCLUDING HAND TOOLS, ELECTRICAL COMPONENTS, MACHINE & MOTOR REPAIR PARTS Complete Assembly Work Area w/automated Conveyor System: 600' (Est.) 21" x 10' Power Roller Conveyor, (3) 21" 90 Turns, (3) Folding Passage Ways, 4-Sections 30" x 20' Roach Belt Conveyor, 1-Section 18" x 20' (7) Adjustable Work Stations w/rol Lift Table Adjusters, Ergomation Tool Balancers, Model RB4 ROCKFORD MIDLAND Cartoner, Model FHH-SP, S/N 11275, Nordson Glue Gun 18" Width Cartoner w/nordson Pro Blue 7 Glue Gun PRECISE Electric Jig Grinder, Model 1158, S/N DAKE 50-Ton Shop Press, Model 50H, 33" Between Housings w/dake No. 1 Arbor Press SNOW 1/2" x 10-Ga. Tapper & Drill, Model ZSDR-2, S/N , Size 3 Tapping Head SNOW Tapper, Model TA-3-S, S/N M DUMORE Tool Post Grinder, Model 8385, Precise Vari-Speed Control ALLEN 30" Drill Press, 34" x 25" Table, RPM MISCELLANEOUS NEW HERMES Gravograv Engraver, Model Vanguard 7000, 34" x 26" Work Area AMETEK 36-Volt & HERTNER 24-Volt Battery Chargers MILWAUKEE Magnetic Base Drill 12" Mechanical Rotab HARIG Duo Form Attachment 10" x 1" Double End Pedestal Grinder (2) HILTI Hammer Drills, Pneumatic Riveters, Box Staplers, Greenlee Hole Punch Set, Conduit Benders, RIDGID Pipe Cutters (19) VIDMAR Cabinets w/top Cabinets GENERAL ELECTRIC WEDNESDAY, 7/31 MEBANE, NC Including Hand Tools, Threaders, Gear Pullers, Hardware, Electrical Components, A/C Parts, Fuses, Brass Fittings, Forklift Parts, Machine Repair Parts, Motor Parts & Control Perishable Tooling, End Mills, Reamers, R-8 Collets, Drills, Drill Sets, Mill Holddown Tooling (3) VIDMAR Modular Tool Cabinets, (12) Flammable Storage Cabinets to 40- Gallon, (14) Rolling Tool Boxes, Rolling Carts, Scissor Lift Tables, Racks, Shelving, (16) Ladders, Wiring, Pipe Fittings, V-Belts, Timing Belts, Machine Vises to 8" CINCINNATI 175-TON AUTOSHAPE HYDRAULIC PRESS BRAKE PRESS BRAKES CINCINNATI 225-Ton Mechanical Press Brake, Model 9, Series x8', 10' Overall, 102" Between Housings, 8-1/2" Throat, Autobend 5L w/24" Back Gauge Control (LOT #1012) CINCINNATI 175-Ton Autoshape Hydraulic Press Brake, Model 175ASx10, S/N 43601,12' Overall, 127" Between Housings, 7-1/2" Throat, Crowning, Autoshape 24" Back Gauge Control (LOT #1002) CINCINNATI 90-Ton (Est.) Mechanical Press Brake, 12' Overall, 120" Between Housings, 8-1/2" Throat, 9" x 12' Die Bed (LOT #1013) OBI PRESSES NIAGARA 110-Ton OBI Press, Model E110, S/N 51579, 5" Stroke, 19.25" Shut Height, 5" Slide Adj., 42" x 27" Lower Bed Plate, 28" x 21" Slide Plate, 40-SPM, Air Clutch (LOT #1004) NIAGARA 45-Ton OBI Press, Model M- 45, S/N 48879,.5" Stroke, 13.5" Shut Height, 6.25" Slide Adj., 28" x 18" Bed Plate, 18" x 14" Slide Plate, 110-SPM, Air Clutch (LOT #1005) NIAGARA 45-Ton OBI Press, Model A- 45, S/N 48884, 1" Stroke, 13.25" Shut NIAGARA 110-TON OBI PRESS DAKE 600-TON (EST.) 4-POST PRESS Height, 2.685" Slide Adj., 28" x 18" Bed Plate, 18" x 14" Slide Plate, Air Clutch (LOT #1008) CNC VERTICAL MACHINING CENTER 1984 MONARCH VMC-45 CNC Vertical Machining Center, S/N 84336, 20" x 42" T-Slot Table, GE Mark Century 2000 Control (LOT #1011) 4 ROLL FORMERS YODER 16-Stand Roll Former, S/N Y (LOT #1007) BRADBURY 10-Stand Roll Former (LOT #1003) TURRET PUNCH WIEDEMANN 45-Ton Turret Punch, Model W-4560, 36-Station Punch (LOT #1006) YODER 16-STAND ROLL FORMER BRADBURY 10-STAND ROLL FORMER MISCELLANEOUS DAKE 600-Ton (Est.) 4-Post Press, Model , S/N , 58" x 96" Bolster (LOT #1001) AUTOMATION ASSOCIATES Tapper, Model NAT-8, S/N 11114, 7" Swing, 9" x 9" Table, ETTCO Tapping Head, Cast Stand (LOT #1009) C-F 10-Ton Material Lift (LOT #1010)

5 GENERAL ELECTRIC THURSDAY 8/1 HOUSTON, TX NIAGARA 400-TON X 14' HYDRAULIC PRESS BRAKE CINCINNATI 135-TON MECHANICAL PRESS BRAKE 1 OF 3 CINCINNATI 300-TON HYDRAULIC PRESS BRAKE CINCINNATI 90-TON MECHANICAL PRESS BRAKE (3) PRESS BRAKE DIE RACKS W/OVER (500) ASSORTED DIES DANLY 110-TON OBI PRESS MINSTER 90-TON OBI PRESS (2) NIAGARA 60-TON OBI PRESSES HYDRAULIC PRESS BRAKES NIAGARA 400-Ton x 14' Hydraulic Press Brake, Model HD , S/N 51987, 14' Overall, 126" Between Housings, 10" Throat, 12" Stroke, 8"/20" Closed/Open Height, 1" x 8' to 5/8" x 11' Capacity, Triad Light Curtain, Foot Ops CINCINNATI 300-Ton Hydraulic Press Brake, Model 300H x 10', S/N 40732, 12" Overall, 100" Between Housings, 9-1/2" Throat, Hurco 36" Autobend 7 Back Gauge Control, Triad Light Curtain, Foot Ops MECHANICAL PRESS BRAKES CINCINNATI 135-Ton Mechanical Press Brake, Model 5 Series x 10', S/N 38149, 12' Overall, 126" Between Housings, 8-1/4" Throat, Hurco 30" Autobend 7 Back Gauge Control, ISB PC300 Press Control, Sti Mini Safe Light Curtain, Foot Ops CINCINNATI 90-Ton Mechanical Press Brake, Model 90-10', S/N, S/N 25065, 12' Overall, 106" Between Housings, 14" Wide Die Bed, 3" Stroke, Air Actuated Mechanical Clutch, Palm Controls (3) Press Brake Die Racks w/over (500) Assorted Dies OBI PRESSES DANLY 110-Ton OBI Press, S/N , 4" Stroke, 19-1/2" Shut Height, 3-1/2" Slide Adj., 27" x 41-3/4" Bolster, SPM, Air Clutch, Triad Light Curtain, Palm Controls, Slide Press Feed MINSTER 90-Ton OBI Press, Model #8, 40" x 26" Bolster, Triad Press Control, Triad Light Curtain (2) NIAGARA 60-Ton OBI Presses, Model E60, S/N's & 18351, 3-1/2" Stroke, 14" Shut Height, 3-1/2" Slide Adj., 32" x 21" Bed Plate, 21" x 16" Slide Area, 92-SPM Air Clutch, Triad Light Curtain, Foot Ops NIAGARA 45-Ton OBI Press, Model A3-1/2, S/N 22724, 2-5/8" Slide Adj., 27-1/4" x 17-1/2" Lower Bed Plate, Palm / Foot Controls NIAGARA 32-Ton OBI Press, Model H3, S/N 23419, 23" x 22-1/2" Bed Plate, 2-1/4" Slide Adj., Foot & Palm Switches, Air Actuated Mechanical Clutch ROUSELLE 25-Ton OBI Press, Model #3, 2" Stroke, 10-3/4" Shut 5 BCP A AUTO BLAST SYSTEM Height, 14" x 20" Bed Plate, 135-SPM, Mechanical Clutch ALLEN 5-Ton Bench Top OBI Press SHOT BLAST BCP Autoblast System, Model A4-9479, S/N 2192, 75-HP, 36" Rotary Parts Rack 1 OF 2 (2) STRIPPIT SUPER 30/30 SINGLE END PUNCHES SINGLE END PUNCHES (2) STRIPPIT Super 30/30 Single End Punches, S/N & , 72" x 48" Table (3) STRIPPIT Punch Die Cabinets (full) & (3) STRIPPIT Die Holder Frames

6 GENERAL ELECTRIC THURSDAY 8/1 HOUSTON, TX CINCINNATI 1810G FSU POWER SQUARING SHEAR 1 OF 2 CINCINNATI AUTOSHEAR 1810 POWER SQUARING SHEAR CINCINNATI 10 POWER SQUARING SHEAR (2) WIEDEMANN MACH II 45-TON CNC TURRET PUNCH PRESSES DT PEER 100-KVA RESISTANCE WELDER HERR INDUSTRIAL 7-STAGE STAINLESS STEEL WASH LINE NORDSON 10-GUN POWDER COAT SPRAY BOOTH 16'-4" X 30' PORTABLE OFFICE LOAD KING 6030 HYDRAULIC BALER (4) ASSSORTED GE SWITCH BOARD TESTERS POWER SQUARING SHEARS CINCINNATI 1810G FSU Power Squaring Shear, S/N 43313, 10' x 1/4" Mild Steel, 135" Squaring Arm, Front Gage Support, Fast Setup Shear Control w/48" FOPBG, Parts Conveyor CINCINNATI Autoshear 1810 Power Squaring Shear, S/N 36981, 10' x 1/4" Mild Steel, 130" Squaring Arm, Front Gage Support, 48" FOPBG, Parts Conveyor CINCINNATI Power Squaring Shear, Model 10, 6' Width, 80" Squaring Arm, Front Gage Support, 36" FOPBG 6 MACHINE REPAIR PARTS CNC TURRET PRESSES (2) WIEDEMANN Mach II 45-Ton CNC Turret Punch Presses, Model W-4560, S/N's 269 & 276, 52" x 143" Rollerball Table w/(2) Holddowns, 36- Station Turret, Punch: 6" thru.1345" to 1" thru 3/8" Mild, 62" Throat, GE Fanuc Series O-P Control Lots of Turret Punch Press Dies FABRICATING REGAL.160" x 12" Straightener, Model 250-SS-12, S/N REGAL 3,000-lb. Double Side Uncoiler, Model DRNP, S/N WAGNER 6" X 6" HYDRAULIC COLD SAW WARNER & SWASEY Right Angle Opti-Shear, Model RAS-412, S/N 154 RICHARDS Multiform Hydraulic Bender, S/N 390BB-C, 54" x 52" Table Area, 20-HP WELDERS LINDE VI-400 CV/CC MIG Welder, Model P-50, 50%, 32" Throat, Cooled Tips, Foot Ops, WTC 500 Weld Controller AIR PULSED ARC PA-3 MIG Welder w/airco Wire Feeder AIRCO CV250 MIG Welder w/airco Wire Feeder KIRKHOF / GOODRICH Portable Resistance Welder, Model OTS794, 3" Throat, Pneumatic Ops, WTC Weld Control, Kranco 1/2-Ton Stand w/chain Fall Mount DT PEER Resistance Welder, Model P-50, S/N 1103, 50%, 32" Throat, Cooled Tips, Foot Ops, WTC Weld Controller, Model WTC500 PEER FR-420 Resistance Welder, %, 24" Cooled Tips TRU WELD SC1000 & PROWELD CD-512 Stud Welders DT PEER Resistance Welder, Model P-50, S/N 1103, 50%, 32" Throat, Cooled Tips, Foot Ops, WTC Weld Controller, Model WTC500 PEER FR-420 Resistance Welder, %, 24" Cooled Tips TRU WELD SC1000 & PROWELD CD-512 Stud Welders

7 GENERAL ELECTRIC THURSDAY 8/1 HOUSTON, TX REGAL.160" X 12" STRAIGHTENER WARNER & SWASEY RIGHT ANGLE OPTI-SHEAR RICHARDS MULTIFORM HYDRAULIC BENDER MATERIAL HANDLING CARTS KRANCO 5-TON X 35' SPAN DOUBLE GIRDER BRIDGE CRANE DEMAG 3-TON MONORAIL HOIST SULLAIR DIESEL-POWER AIR COMPRESSOR TOOLROOM DELTA 10" x 18" Toolroom Lathe, 8" 3-Jaw Chuck, 10" Swing Over Bed, 6" Swing Over Carriage, 18" Between Centers, 3/4" Thru Spindle, Threading ROCKWELL DELTA HD Shaper, 27" x 16" Working Area SAWS WAGNER 6" x 6" Hydraulic Cold Saw, Model WHM400A, S/N ROBERT STONE 12' Panel Saw, Model SS-100-LR, High Speed Traverse Type HENDRICK 8' x 12' Panel Saw, Chain Drive DELTA 14" Vertical Band Saw, 6-1/2" Max. Thickness, 14" x 14" Tilt Table ROCKWELL DELTA Vertical Band Saw, Model , 14" Throat x 6-1/2" Max. Thickness, 14" x 14" Tilt Table CENTRAL MACHINERY 4-1/2' Metal Cutting Band Saw, Model 37151, S/N DELTA Radial Arm Saw, 13" Rip, 2- HP, Runoff Table DRILLS WILTON Cast Drill Table w/(4) 15" Drill Heads, 400-5,000 RPM, 84" x 16" Table Area DELTA, DAYTON & BUFFALO 20" Drill Presses WATER TREATMENT SYSTEM Complete Water Treatment System w/(3) POLY PRODUCTS Evaporation Tanks, Model ET-III-W, 2,000 & 3,000- Gallon Poly Chemical Additive Tanks, DI Water System, Control Panel WASH LINE HERR INDUSTRIAL 7-Stage Stainless Steel Wash Line, 63" Width, 37" x 60" Openings POWDER COAT SYSTEM NORDSON 10-Gun Powder Coat Spray Booth, Sure Coat Gun Control, Reclaim System, Sweco Vibro Energy Separator, 26" x 54" Openings 30' Double Pass Cool-Down Tunnel & Blow Off, 29" x 60" Openings 50' Triple-Pass Gas Curing Oven, 28" x 53" Openings FORKLIFTS YALE 6,000-lb. Forklift, Model ERC060RGN36TE084, S/N E108V13462X, Electric, 187.8" Lift, Solid Tires, ROPS YALE 5,000-lb. Forklift, Model ERC050RFN36SE084, S/N E108V07468U, Electric, 194" Lift, Side Shift, Solid Tires, ROPS (2) HYSTER 3,500-lb. Standup Forklifts, Model N40CK, S/N's B138D01827H & B138D01830H, 247" Lift (2) HYSTER Electric Forklifts (parts/repair) MATERIAL HANDLING KRANCO 5-Ton x 35' Span Double Girder Bridge Crane, Top Running (4) ROTARY SCREW AIR COMPRESSORS TO 75-HP (SULLAIR, GARDNER DENVER, QUINCY) Bridge & Hoist, 6-Way Pendant 17'-6" Span Single Girder Bridge Crane, Top Running, Underhung Hoist, 2-Ton Shaw Box Hoist, 6-Way Pendant (3) 12' Span Single Girder Bridge Cranes, 1-Ton Hoist, Underhung Bridge & Hoist, 4-Way Pendant GORBEL 2,000-lb. Free-Standing Bridge System, (2) 18' Span Bridges ALL STATE 1-Ton Pedestal Jib DEMAG 3-Ton Monorail Hoist, 65' Rail, 4-Way Pendant (1) YALE 6,000-lb. & (3) CROWN 4,000-lb. Walkie Pallet Jacks (2) PRESTO 4,000-lb. Scissor Lift Tables (8) ROL LIFT & ECONOMY Die Lifts CALDWELL 6,000-lb. x 8' Spreader Beam 800' (Est.) MONORAIL Conveyor System (21) Sections 22" x 10' Roller Conveyor Roller Ball Tables: (2) 40" x 60", (1) 40" x 84" (14) Dump Hoppers to 2-Yard Pallet Racking, Storage Racks, Carts, Parts Tubs, 2-Wheel Hand Carts, Barrel Lifts, (8) Pallet Jacks AIR COMPRESSORS & DRYER SULLAIR Diesel-Power Air Compressor, Model DC300/500 w/arrow Specialty Diesel Engine (4) Rotary Screw Air Compressors to 75-HP (SULLAIR, GARDNER DEN- VER, QUINCY SULLAIR & PURE AIR Refrigerated Air Dryers SULLAIR & PURE AIR REFRIGERATED AIR DRYERS MISCELLANEOUS LOAD KING Hydraulic Baler, Model 6030, S/N 6468 CENTRAL PNEUMATICS 2-Glove Abrasive Parts Cleaning Cabinet COBRA IV Automatic Inverted Pallet Wrapper BETCO BPS28 Push Sweeper CENTRAL MACHINERY, DUSTKOP & DELTA Bag-Type Dust Collectors (3) Drum-Mounted Vacuum Systems NU-STAR Electric Power Puncher 30-Ton Air-Operated Press, 10" Between Housings EAGLE 30-Gallon Flammable Storage Cabinet Assorted Coil Steel, Scrap Chopper, Surplus & Scrap Punch Press Dies Transformer, GE Switch Board Testers, Electronic Controls & Gages, Wiring, Circuit Controls Riveters, Battery Chargers to 48- Volt, Drill Point Grinders, Belt Sander, Arbor Press, DE Pedestal Grinder, Conduit Benders, Pipe, Conduit, Machine Repair Parts, Hydraulic Jacks, Chains & Sprockets, Clamps, Vises, Banding Carts, Tools, Double Door Cabinets, Work Benches, Foreman's Desks, Steel Layout Tables, (24) Assorted Ladders, (22) Pedestal Fans, (7) Shop Vacs, (3) HAYWARD Pool Heaters OFFICE RELATED 16'-4" x 30' Portable Office, (2) Entrance Doors, Roof-Mounted A/C Assorted Modular Office Partitions Desks, Chairs, Lunchroom Items 7

8 PLANT CLOSED ASSETS OF GENERAL ELECTRIC 1114 Old Concord Rd. in Salisbury, NC Mebane, NC is Selling in Salisbury Salisbury Inspection: Day prior to auction from 9AM - 4PM WEDNESDAY, JULY 31ST AT 10AM Mebane equipment will be sold at the Salisbury auction by photo. Inspection: by appointment only - contact Christopher Lee (513) W. 12th Street in Houston TX THURSDAY, AUGUST 1ST AT 10AM Inspection: Day prior to auction from 9AM - 4PM Myron Bowling Auctioneers P.O. BOX 369 ROSS, OHIO PRE-SORT FIRST CLASS U.S. POSTAGE PAID CINCINNATI, OHIO PERMIT NO FIRST CLASS MAIL! 2006 NIAGARA 400-TON X 14' HYDRAULIC PRESS BRAKE HYSTER S120FT 12,000-LB. FORKLIFT Important Mail TO BE DIRECTED NEWTO THE ATTENTION OF EXECUTIVE 1984 PERSONNEL (5) SALVAGNINI METALFORMING LINES GENERAL ELECTRIC 1114 Old Concord Rd. in Salisbury, NC Mebane, NC is Selling in Salisbury WEDNESDAY, JULY 31ST AT 10AM Salisbury Inspection: Day prior to auction from 9AM - 4PM 3530 W. 12th Street in Houston, TX THURSDAY, AUGUST 1ST AT 10AM Inspection: Day prior to auction from 9AM - 4PM IMPORTANT NOTICE: Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions. Please check with the Auctioneer s Office for a final listing. Items offered may or may not necessarily be sold as described and/or photographed in this brochure. MAIL BIDS ACCEPTED WITH A 25% DEPOSIT PLANT CLOSED TERMS OF SALE All of the above is sold as is, where is to the highest bidder or bidders for cash in accordance with our regular terms and conditions of sale. A deposit of 25% on all purchases is required in cash, certified or cashier s check, made payable to Myron Bowling Auctioneers, Inc. Firm or personal checks accepted only if accompanied by a letter of credit from your bank guaranteeing your funds. Balance due at conclusion of sale. All sales are subject to state and/or local sales tax, unless a signed exemption form is presented at the time of purchase. No merchandise may be removed while the sale is in progress. 15% buyer s premium in effect for in-person bidding and 18% for online bidding at this sale. AUCTIONEERS North Carolina Auction License Numbers: Myron C. Bowling #5800 Myron Bowling Auctioneers, Inc. #7966 Jeffrey L. Luggen #5611 Cincinnati Industrial Auctioneers, Inc. #5610 Texas Auction License Numbers: Myron C. Bowling #12989 Jeffrey L. Luggen #11379 DIRECTIONS SALISBURY LODGING From I-85 (approx. 35 miles North of Charlotte NC), take Exit #75 for US-601 / Jake Alexander Blvd. Turn right onto Jake Alexander Blvd & go 3/10 mile & turn left onto Old Concord Rd. HOUSTON LODGING From I-10 in Houston, take Exit # 762 toward Washington Ave. At the top of the exit, merge onto the Katy Freeway & immediately take a slight right onto Washington Ave. Go 1/2 mile & continue onto Hempstead Rd. Go 9/10 mile to W 12th St. Turn right onto W. 12th Street. LODGING SALISBURY LODGING All Major Hotels in Salisbury N.C. HOUSTON LODGING Hampton Inn - (800) Katy Fwy Holiday Inn Express - (877) Katy Fwy Days Inn - (800) Northwest Fwy Myron Bowling Auctioneers Inc. P.O. BOX 369 ROSS, OHIO PH (513) / FAX (513) INTERNET: Cincinnati Industrial Auctioneers Inc DUNLAP ST., CINCINNATI, OHIO PH (513) / FAX (513) INTERNET: