Course in Non-Destructive Testing of Wood
|
|
|
- Samson Pitts
- 8 years ago
- Views:
Transcription
1 Course in Non Destructive Testing of Wood 01 Introducción Pág. 1 Course in Non-Destructive Testing of Wood INTRODUCTION ETS Ingenieros de Montes ETS Arquitectura UPM, Madrid Literature 1
2 Course in Non Destructive Testing of Wood 01 Introducción Pág. 2 Classification of wood NDT techniques based on the physical background Mechanical Acoustic Electromagnetic Nuclear Mechanical Proof loading Static bending Drill resistance Pin penetration 2
3 Course in Non Destructive Testing of Wood 01 Introducción Pág. 3 METRIGUARD bending proof loader METRIGUARD tensile proof loader 3
4 Course in Non Destructive Testing of Wood 01 Introducción Pág. 4 METRIGUARD HCLT lumber grader and grade stamp Lumber grading, static MOE determination HCLT tool by Metriguard, USA 4
5 Course in Non Destructive Testing of Wood 01 Introducción Pág. 5 HCLT tool by Metriguard, USA Resistograph drill 5
6 Course in Non Destructive Testing of Wood 01 Introducción Pág. 6 Simple Drill testing Pylodin, pin penetration tool 6
7 Course in Non Destructive Testing of Wood 01 Introducción Pág. 7 Acoustic methods Stress wave Ultrasonic Acoustic emission Vibration (longitudinal, transversal, torsion) Stress wave timers 1 7
8 Course in Non Destructive Testing of Wood 01 Introducción Pág. 8 Stress wave timers 2 Acoustic tomography Fakopp 2D PICUS SONIC TOMOGRAPH Image source is 8
9 Course in Non Destructive Testing of Wood 01 Introducción Pág. 9 ARBOTOM Image source: Ultrasonic timer, Sylvatest 9
10 Course in Non Destructive Testing of Wood 01 Introducción Pág. 10 GRECON on-line particle board control, based on attenuation of ultrasonic waves Acoustic emission event 10
11 Course in Non Destructive Testing of Wood 01 Introducción Pág. 11 Drying control by acoustic emission Longitudinal vibration, Lumber grader Dynalyse, Dynagrader Portable Lumber Grader Microtec, ViSCAN 11
12 Course in Non Destructive Testing of Wood 01 Introducción Pág. 12 Electromagnetic Moisture meters Microwaves Thermography Moisture meter 12
13 Course in Non Destructive Testing of Wood 01 Introducción Pág. 13 METRIGUARD veneer grader based on ultrasonic speed and microwave attenuation Quality control at LVL palnt Thermography 13
14 Course in Non Destructive Testing of Wood 01 Introducción Pág by 10 by 10 cm spruce cube conditioned at -12 C o Heating up from -12C o to 22 C o Thermal images after 2 and 40 minutes heating time 14
15 Course in Non Destructive Testing of Wood 01 Introducción Pág. 15 Spruce knot with nail 10 cm Sugi (Criptonomeria Japonica) 15
16 Course in Non Destructive Testing of Wood 01 Introducción Pág. 16 Traditional Japanese wall section Outdoor test samples 16
17 Course in Non Destructive Testing of Wood 01 Introducción Pág. 17 Thermographic image of the outdoor test, temperature is rising. He-Ne laser interaction with fibers Spot on paper Transmission through 2 mm polpar veneer 17
18 Course in Non Destructive Testing of Wood 01 Introducción Pág. 18 Nuclear techniques X-ray Gamma-ray, CT Magnetic resonance CT image of a fir log 18
19 Course in Non Destructive Testing of Wood 01 Introducción Pág. 19 Gamma densitometry, scattering Gamma densitometry, backscattering 0,9 0,8 0,7 0,6 0,5 0,4 0, Inte ns ity [a rb itra ry unit] 19
20 Course in Non Destructive Testing of Wood 01 Introducción Pág. 20 Gamma densitometry, through transmission Wood sample located between the source (Am-241) and sensor Measured parameter: Intensity: I (counts/sec) Equation: - ρ: density ρµ d I = I e - d: thickness 0 - µ: absorbtion coeff. 20
820086 - AND - Non-Destructive Testing
Coordinating unit: 820 - EUETIB - Barcelona College of Industrial Engineering Teaching unit: 702 - CMEM - Department of Materials Science and Metallurgy Academic year: Degree: 2015 BACHELOR'S DEGREE IN
High-Speed Nondestructive Testing and Intelligent Construction Systems
High-Speed Nondestructive Testing and Intelligent Construction Systems 1st International Conference on Transportation Construction Management February 9-11, 9 2008 Orlando, Florida Ted Ferragut, P.E. NDT
NON-DESTRUCTIVE METHODS. CE 165: Concrete Materials and Concrete Construction
NON-DESTRUCTIVE METHODS NON-DESTRUCTIVE METHODS Purpose: quick assessment of the structure Non-Destructive Techniques Many industrialized nations currently dedicate a considerable portion of the construction
Waves - Transverse and Longitudinal Waves
Waves - Transverse and Longitudinal Waves wave may be defined as a periodic disturbance in a medium that carries energy from one point to another. ll waves require a source and a medium of propagation.
NON-DESTRUCTIVE TESTING FULL SCOPE OF INTEGRATED NDT SERVICES
NON-DESTRUCTIVE TESTING FULL SCOPE OF INTEGRATED NDT SERVICES RIGHT SERVICE MAXIMUM RETURN Whether it is in fabrication, pipe manufacturing, pipeline, plant construction, chemical, petrochemical plants,
Preview of Period 2: Forms of Energy
Preview of Period 2: Forms of Energy 2.1 Forms of Energy How are forms of energy defined? 2.2 Energy Conversions What happens when energy is converted from one form into another form? 2.3 Efficiency of
XII. 3.2 Determining Bulk Material Properties 40. 3.3 Determining the Properties of Fluids 42
Table of Contents Nomenclature (Selection) Terminology Symbols and Abbreviated Terms XXI XXIX XXXIII 1 Introduction 1 1.1 The Genesis of Polymer Testing as a Science 1 1.2 Factors Influencing Data Acquisition
NON DESTRUCTIVE TESTING & ASNT WELD INSPECTION & AWS
NON DESTRUCTIVE TESTING & ASNT WELD INSPECTION & AWS What is ASNT? What is ASNT? The American Society for Nondestructive Testing, Inc. What is ASNT? ASNT is the world's largest technical society for nondestructive
GRADING MACHINES APPROVED BY THE BOARD OF REVIEW. Granted approval around 1962. Granted approval 1/23/86.
1. Metriguard Model 3300 Transverse Vibration E-Computer Metriguard Model 340 Transverse Vibration E Computer WCLIB Metriguard, Inc. PO Box 399 Pullman, WA 99163 2. Stress-O-Matic WWPA Industrial Woodworking
Ultrasonic Technique and Device for Residual Stress Measurement
Ultrasonic Technique and Device for Residual Stress Measurement Y. Kudryavtsev, J. Kleiman Integrity Testing Laboratory Inc. 80 Esna Park Drive, Units 7-9, Markham, Ontario, L3R 2R7 Canada ykudryavtsev@itlinc.com
Nondestructive Testing
A BCC Research Report MFG016F Use this report to: Understand nondestructive testing (NDT) technology, its products, applications, and key end-user markets Learn why NDT continues to play a leading role
Waves Sound and Light
Waves Sound and Light r2 c:\files\courses\1710\spr12\wavetrans.doc Ron Robertson The Nature of Waves Waves are a type of energy transmission that results from a periodic disturbance (vibration). They are
Comparative Analysis of Tools and Methods for the Evaluation of Tree Stability
Comparative Analysis of Tools and Methods for the Evaluation of Tree Stability Results of a field test in Germany By Bodo Siegert In a field-test project, sixteen trees were examined and evaluated through
Failure Analysis: Nondestructive Testing Methods Daniel H. Herring - The Herring Group Inc., Elmhurst, Ill.
Failure Analysis: Nondestructive Testing Methods Daniel H. Herring - The Herring Group Inc., Elmhurst, Ill. Many defect-testing techniques exist and it may not be clear why one is used over the other.
Lists of estimated quantities to be performed and prices Estimated quantities to be performed. Prices
Schedule No. 2 Payment Schedule Task number according to Schedule No. 1 Scope of task Lists of estimated quantities to be performed and prices Estimated quantities to be performed Prices Date of execution
AZ State Standards. Concept 3: Conservation of Energy and Increase in Disorder Understand ways that energy is conserved, stored, and transferred.
Forms of Energy AZ State Standards Concept 3: Conservation of Energy and Increase in Disorder Understand ways that energy is conserved, stored, and transferred. PO 1. Describe the following ways in which
INTERGOVERNMENTAL STANDARD GOST 3916.1-96
INTERGOVERNMENTAL STANDARD GOST 3916.1-96 Plywood with outer layers of deciduous veneer for general use. Contents DESCRIPTION GENERAL USE PWOOD CLASSIFICATION AND DIMENSIONS( table1,2) TECHICAL REQUIREMENTS
Course Co-ordinator: For Whom This Course is Designed This Course is Designed For: Engineers Managers Supervisors P. 3
#198 Non Destructiive Testiing (NDT),, Non Destructiive Evalluatiion (NDE),, Petrolleum - Oiill and Gas - Piipelliines Inspectiion,, Briidges Inspectiion,, Oiill Gas Storage Tanks Testiing,, Raiill NDE
NON-DESTRUCTIVE TESTING OF PIPELINES. L. Annila. Abstract
NON-DESTRUCTIVE TESTING OF PIPELINES L. Annila Abstract This paper shall present different, contemporarily available non-destructive testing (NDT) methods of pipelines and compare them to each other from
Intelligent Measurement and Diagnostic Techniques for Non-destructive Inspections
Intelligent Measurement and Diagnostic Techniques for Non-destructive Inspections 296 Intelligent Measurement and Diagnostic Techniques for Non-destructive Inspections Fuminobu Takahashi, D. Eng. Shigeru
Cost Action FP1101 Assessment, Reinforcement and Monitoring of Timber Structures
Cost Action FP1101 Assessment, Reinforcement and Monitoring of Timber Structures Short Term Scientific Mission Report: ASSESSMENT AND DIAGNOSIS OF AN ANCIENT COLLAR TRUSS BY MEANS OF VISUAL GRADING AND
CT for non-destructive testing of plastic joints
CT for non-destructive testing of plastic joints B. Baudrit, S. Horlemann, E. Kraus 24. October 2013 German-Austrian-Danish Workshop on Industrial CT Scanning, TUM, Munich List of contents Introduction
Basics of Reinforced Concrete Design
Basics of Reinforced Concrete Design Presented by: Ronald Thornton, P.E. Define several terms related to reinforced concrete design Learn the basic theory behind structural analysis and reinforced concrete
EMF shielding by building materials
EMF shielding by building materials Attenuation of microwave band electromagnetic fields by common building materials The U.S. National Institute of Standards and Technology (NIST) conducted in 1997 extensive
DOUBLE STAINLESS STEEL TUBE DTS FIBER OPTIC CABLE FTSF-FSUTS(DTS)
DOUBLE STAINLESS STEEL TUBE DTS FIBER OPTIC CABLE FTSF-FSUTS(DTS) Double Jelly Filled Stainless Steel Tube General Description This document specifies non armour sensing fiber cable with double stainless
A REVIEW OF NONDESTRUCTIVE TESTING METHODS AND THEIR APPLICABILITY TO POWDER METALLURGY PROCESSING. R. C. O'Brien and W. B. James
A REVIEW OF NONDESTRUCTIVE TESTING METHODS AND THEIR APPLICABILITY TO POWDER METALLURGY PROCESSING R. C. O'Brien and W. B. James Hoeganaes Corporation Riverton, New Jersey 08077 USA ABSTRACT The problem
BIOMEDICAL ULTRASOUND
BIOMEDICAL ULTRASOUND Goals: To become familiar with: Ultrasound wave Wave propagation and Scattering Mechanisms of Tissue Damage Biomedical Ultrasound Transducers Biomedical Ultrasound Imaging Ultrasonic
Use the following image to answer the next question. 1. Which of the following rows identifies the electrical charge on A and B shown above?
Old Science 30 Physics Practice Test A on Fields and EMR Test Solutions on the Portal Site Use the following image to answer the next question 1. Which of the following rows identifies the electrical charge
Application of Welding Standards in Hong Kong. S. K. Babu Laboratory Manager - Foundation Techniques Ltd
Application of Welding Standards in Hong Kong S. K. Babu Laboratory Manager - Foundation Techniques Ltd Introduction: This paper summarizes the current welding standards practiced in Hong Kong & also outlines
Optical Fibers Fiber Optic Cables Indoor/Outdoor
presents Optical Fibers Fiber Optic Cables Indoor/Outdoor Content Optical fiber function, types optical effects applications production of optical fibre Cable - general types Indoor Indoor / outdoor Outdoor
DAMAGE ASSESSMENT IN COMPOSITE MATERIALS WITH NEW THERMAL METHODS
1 th International Conference on Experimental Mechanics PAPER REF: 674 DAMAGE ASSESSMENT IN COMPOSITE MATERIALS WITH NEW THERMAL METHODS Umberto Galietti (*), Palumbo Davide, Gianfranco Calia Dipartimento
Introduction to Standards and Nondestructive Testing of Industrial Materials
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. KEY CONCEPTS 17 Introduction to Standards and Nondestructive Testing of Industrial Materials
Unit 2 Lesson 1 Introduction to Energy. Copyright Houghton Mifflin Harcourt Publishing Company
Get Energized! What are two types of energy? Energy is the ability to cause change. Energy takes many different forms and causes many different effects. There are two general types of energy: kinetic energy
Energy. Mechanical Energy
Principles of Imaging Science I (RAD119) Electromagnetic Radiation Energy Definition of energy Ability to do work Physicist s definition of work Work = force x distance Force acting upon object over distance
STANDARD EXTRUDED HEAT SINKS
STANDARD EXTRUDED HEAT SINKS ABHA101 Weight: 0.4oz (11.34g) ABHA102 Weight: 0.5oz (14.17g) STANDARD EXTRUDED HEAT SINKS ABHA103 Weight: 0.2oz (5.57g) For use with DIPs and SRAMs ABHA104 Weight: 0.1oz (2.83g)
Infrared Thermography and Water Damage Assessment
Infrared Thermography and Water Damage Assessment Noah Ceteras / Scott Wood Four Star Cleaning and Restoration / Building Science Institute ABSTRACT Thermal imaging devices have many uses across a wide
GUIDELINES ON NON-DESTRUCTIVE TESTING OF BRIDGES
GOVERNMENT OF INDIA MINISTRY OF RAILWAYS GUIDELINES ON NON-DESTRUCTIVE TESTING OF BRIDGES BS - 103 August, 2009 B&S DIRECTORATE RESEARCH DESIGNS AND STANDARDS ORGANISATION LUCKNOW-226011 PREFACE Non-destructive
NEW TECHNIQUE FOR RESIDUAL STRESS MEASUREMENT NDT
NEW TECHNIQUE FOR RESIDUAL STRESS MEASUREMENT NDT E. Curto. p.i. Ennio Curto Via E. di Velo,84 36100 Vicenza Tel. 0444-511819 E-mail enniocurto@fastwebnet.it Key words: NDE Residual stress. New technique
Pavement Design. Guest Lecturer Dr. Sirous Alavi, P.E. SIERRA TRANSPORTATION. 1005 Terminal Way, Suite 125 Reno, Nevada 89502
Pavement Design Guest Lecturer Dr. Sirous Alavi, P.E. SIERRA TRANSPORTATION ENGINEERS,, INC. I 1005 Terminal Way, Suite 125 Reno, Nevada 89502 Topics Introduction Design Factors Pavement Types Fundamentals
Ultrasonic Guided Waves Evaluation of Trials for Pipeline Inspection
17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China Ultrasonic Guided Waves Evaluation of Trials for Pipeline Inspection Francisco C. R. MARQUES 1, Alessandro DEMMA 2 1 E&P
Q1. The diagram below shows the range of wavelengths and frequencies for all the types of radiation in the electromagnetic spectrum.
Q. The diagram below shows the range of wavelengths and frequencies for all the types of radiation in the electromagnetic spectrum. X rays, which have frequencies in the range 0 8 0 2 Hz are already marked
THE ULTRASONIC TOMOGRAPHY TESTS OF CONCRETE IN FOUNDATION SLAB
THE ULTRASONIC TOMOGRAPHY TESTS OF CONCRETE IN FOUNDATION SLAB Krzysztof SCHABOWICZ 1, Jerzy HOLA 1, Dariusz STYS 1 1 Institute of Building Engineering, Wrocław University of Technology, Wybrzeże Wyspiańskiego
Robert H. White, Research Wood Scientist, U.S. Forest Products Lab., Madison, WI, USA, rhwhite@fs.fed.us Brian Kukay, Associate Professor of General
Robert H. White, Research Wood Scientist, U.S. Forest Products Lab., Madison, WI, USA, rhwhite@fs.fed.us Brian Kukay, Associate Professor of General Engineering, Montana Tech of the University of Montana,
PIEZOELECTRIC FILMS TECHNICAL INFORMATION
PIEZOELECTRIC FILMS TECHNICAL INFORMATION 1 Table of Contents 1. PIEZOELECTRIC AND PYROELECTRIC EFFECTS 3 2. PIEZOELECTRIC FILMS 3 3. CHARACTERISTICS PROPERTIES OF PIEZOELECTRIC FILMS 3 4. PROPERTIES OF
Semester 2. Final Exam Review
Semester 2 Final Exam Review Motion and Force Vocab Motion object changes position relative to a reference point. Speed distance traveled in a period of time. Velocity speed in a direction. Acceleration
Introduction. Stefano Ferrari. Università degli Studi di Milano stefano.ferrari@unimi.it. Elaborazione delle immagini (Image processing I)
Introduction Stefano Ferrari Università degli Studi di Milano stefano.ferrari@unimi.it Elaborazione delle immagini (Image processing I) academic year 2011 2012 Image processing Computer science concerns
Non Invasive Roof Leak Detection Using Infrared Thermography
Non Invasive Roof Leak Detection Using Infrared Thermography Scott Wood Four Star Cleaning and Restoration, Inc. ABSTRACT Residential roofs without attics are typically inspected for leaks by installing
EVERYDAY ENGINEERING EXAMPLES FOR SIMPLE CONCEPTS
EVERYDAY ENGINEERING EXAMPLES FOR SIMPLE CONCEPTS Thermal Properties ENGR 3350 - Materials Science Dr. Nedim Vardar Copyright 2015 Thermal Properties of Materials Engage: MSEIP Engineering Everyday Engineering
Mold Preventing I nterior System
interior insulation and renovation boards A system of components that have been designed to work perfectly together to repair damage caused by mold. The system consists of boards, insulation wedges, reveal
Potentials and Limitations of Ultrasonic Clamp load Testing
2007-01-1668 Potentials and Limitations of Ultrasonic Clamp load Testing Copyright 2007 SAE International Dr.-Ing. Gunther Hartmann KAMAX-Werke ABSTRACT Ultrasonic clamp load testing is known as a sophisticated
Fiber Optic Specifications
Fiber Optic Specifications All Fiber Optic shall be Corning Altos Single Mode OS1 Outdoor Loose Tube Gel Free Cable Corning Fiber Products only will be accepted and no substitutions or alternates will
World Class Training in NDT COURSE CATALOGUE
World Class Training in NDT COURSE CATALOGUE canadian innovation. global knowledge. TRAINING NDT technique courses Professional Development training Workshops - Certification and Academic On-site at company
Nondestructive Evaluation of USCG. 2401 Hawkins Pt. Road Curtis Bay, MD 21226. Provided by: HurleyIR
Nondestructive Evaluation of USCG 2401 Hawkins Pt. Road Curtis Bay, MD 21226 Provided by: HurleyIR On Tuesday May 20 th 2014, HurleyIR provided a nondestructive evaluation for Ruff Roofers of the USCG
Indiana Boiler and Pressure Vessel Safety Section Frequently Asked Questions
Indiana Boiler and Pressure Vessel Safety Section Frequently Asked Questions What are the licensing requirements for boiler operators? Answer: Indiana statute (IC 22-15-6) and administrative rules (680
DESIGN AND EVALUATION OF PROBE WITH THREE DEGREE- OF-FREEDOM FOR NON-DESTRUCTIVE TEST USING THREE- DIMENSIONAL FINITE ELEMENT METHOD
DESIGN AND EVALUATION OF PROBE WITH THREE DEGREE- OF-FREEDOM FOR NON-DESTRUCTIVE TEST USING THREE- DIMENSIONAL FINITE ELEMENT METHOD Masafumi Aoyanagi Graduate School of Systems and Information Engineering,
NATIONAL ASSESSMENT DIRECTIVE FOR THE PRODUCT CERTIFICATE FOR WOODEN SCAFFOLDING BOARDS
BRL 9923 dd. 2004-10-01 NATIONAL ASSESSMENT DIRECTIVE FOR THE KOMO PRODUCT CERTIFICATE FOR WOODEN SCAFFOLDING BOARDS Technical area E2 Accepted by the Committee of Experts of SKH dd. 15 th September 2004
Measuring the Condition of Prestressed Concrete Cylinder Pipe
Measuring the Condition of Prestressed Concrete Cylinder Pipe John Marshall, P.E.I, I J.W. Marshall and Associates, and Paul S. Fisk, President NDT Corporation Introduction Prestressed Concrete Cylinder
Reliable Flaw Detection. Fast Inspection Times. High quality non-destructive testing services tailored for all your needs. www.tuv.
INDUSTRIAL SERVICES - NON-DESTRUCTIVE TESTING Reliable Flaw Detection. Fast Inspection Times. High quality non-destructive testing services tailored for all your needs. www.tuv.com/ndt The reliability
Laminar and Turbulent flow. Flow Sensors. Reynolds Number. Thermal flow Sensor. Flow and Flow rate. R = Mass Flow controllers
Flow and Flow rate. Laminar and Turbulent flow Laminar flow: smooth, orderly and regular Mechanical sensors have inertia, which can integrate out small variations due to turbulence Turbulent flow: chaotic
RADIOFREQUENCY RADIATION, (RFR): (RFR Information - Technology Newsletter, Full Version)
RADIOFREQUENCY RADIATION, (RFR): (RFR Information - Technology Newsletter, Full Version) George M. Harris, P.E. (Revised February, 2011) Questions: -What is Radiofrequency Radiation, (RFR)? -With SO MANY
Using light scattering method to find The surface tension of water
Experiment (8) Using light scattering method to find The surface tension of water The aim of work: The goals of this experiment are to confirm the relationship between angular frequency and wave vector
Curriculum Overview IB Physics SL YEAR 1 JUNIOR TERM I (2011)
Curriculum Overview IB Physics SL YEAR 1 JUNIOR TERM I (2011) Resources: Gregg Kerr, Nancy Kerr, (2004) Physics International Baccalaureate, IBID Press, Victoria, Australia. Tim Kirk and Neil Hodgson Physics
Energy Transformations
Energy Transformations Concept Sheet Energy Transformations PS.6: The student will investigate and understand states and forms of energy and how energy is transferred and transformed. 1. Energy is the
Boardworks AS Physics
Boardworks AS Physics Vectors 24 slides 11 Flash activities Prefixes, scalars and vectors Guide to the SI unit prefixes of orders of magnitude Matching powers of ten to their SI unit prefixes Guide to
INTERNATIONAL TELECOMMUNICATION UNION #/.3425#4)/. ).34!,,!4)/.!.$ 02/4%#4)/. /& #!",%3!.$ /4(%2 %,%-%.43 /& /543)$% 0,!.43
INTERNATIONAL TELECOMMUNICATION UNION )454, TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU #/.3425#4)/. ).34!,,!4)/.!.$ 02/4%#4)/. /& #!",%3!.$ /4(%2 %,%-%.43 /& /543)$% 0,!.43 /04)#!, &)"2% #!",%3 &/2
How does a microwave oven work?
last lecture Electromagnetic waves oscillating electric and magnetic fields c = c = 3x10 8 m/s or 186,282 miles/sec Radios using the tank circuit to emit and receive electromagnetic waves of a specific
Experimental Study on Non Destructive Testing Techniques (NDTT)
Experimental Study on Non Destructive Testing Techniques (NDTT) G.Lalitha 1, K.Bala Showry 2 1 G.Lalitha Assistant Prof, Civil Engineering, BVRIT, TS, India 2 Dr.K.Bala Showry Professor, Mechanical Engineering,
INTERNATIONAL ASSOCIATION OF CLASSIFICATION SOCIETIES. Interpretations of the FTP
INTERNATIONAL ASSOCIATION OF CLASSIFICATION SOCIETIES Interpretations of the FTP CONTENTS FTP1 Adhesives used in A or B class divisions (FTP Code 3.1, Res A.754 para. 3.2.3) June 2000 FTP2 Pipe and duct
What is Energy? What is the relationship between energy and work?
What is Energy? What is the relationship between energy and work? Compare kinetic and potential energy What are the different types of energy? What is energy? Energy is the ability to do work. Great, but
TECHICAL SPECIFICATION IP65 EMI EMC Gaskets
Pag. 1/5 TECHICAL SPECIFICATION IP65 EMI EMC Gaskets Description Market requirements permit us to offer different gaskets that cover the double function of watertight seals and electromagnetic interference
ME 472 Engineering Metrology
ME 472 Engineering Metrology and Quality Control Chp 6 - Advanced Measurement Systems Mechanical Engineering University of Gaziantep Dr. A. Tolga Bozdana Assistant Professor Coordinate Measuring Machines
Technical Notes NDT 001 Specific Requirements for Non- Destructive Testing Laboratories
ACCREDITATION SCHEME FOR LABORATORIES Technical Notes NDT 001 Specific Requirements for Non- Destructive Testing Laboratories Technical Notes NDT 001, Apr 14 The SAC Accreditation Programme is managed
Development of Optical Wave Microphone Measuring Sound Waves with No Diaphragm
Progress In Electromagnetics Research Symposium Proceedings, Taipei, March 5 8, 3 359 Development of Optical Wave Microphone Measuring Sound Waves with No Diaphragm Yoshito Sonoda, Takashi Samatsu, and
Non-Destructive Testing
Non-Destructive Testing Bureau Veritas is one of the largest Testing, Inspection and Certification service providers in the world. First established in 1828, Bureau Veritas now spans the globe with a network
STATE OF NEBRASKA STATUTES RELATING TO MEDICAL RADIOGRAPHY PRACTICE ACT
2010 STATE OF NEBRASKA STATUTES RELATING TO MEDICAL RADIOGRAPHY PRACTICE ACT Department of Health and Human Services Division of Public Health Licensure Unit 301 Centennial Mall South, Third Floor PO Box
High Data Rate MWD Mud Pulse Telemetry
High Data Rate MWD Mud Pulse Telemetry Wallace R. Gardner (wgardner@halnet.com; 713-496-8118) Halliburton P.O. Box 15414 Houston, TX 77242 Abstract The objective of this project is to build and test a
Heating Load Calculation
Heating Load Calculation ME 425 Air Conditioning System Design Keith E. Elder, P.E. Heating Load Calculation The heating load calculation begins with the determination of heat loss through a variety of
Detection of Exposure Damage in Composite Materials Using Fourier Transform Infrared Technology
Detection of Exposure Damage in Composite Materials Using Fourier Transform Infrared Technology Randy Duvall Dennis Roach Sandia National Labs FAA Airworthiness Assurance Center Sandia is a multiprogram
In science, energy is the ability to do work. Work is done when a force causes an
What is energy? In science, energy is the ability to do work. Work is done when a force causes an object to move in the direction of the force. Energy is expressed in units of joules (J). A joule is calculated
Dispersion diagrams of a water-loaded cylindrical shell obtained from the structural and acoustic responses of the sensor array along the shell
Dispersion diagrams of a water-loaded cylindrical shell obtained from the structural and acoustic responses of the sensor array along the shell B.K. Jung ; J. Ryue ; C.S. Hong 3 ; W.B. Jeong ; K.K. Shin
Kresimir Bakic, CIGRE & ELES, Slovenia
"Maintenance SLOVENIJA and recovery 2014 of HV electricity transport systems and aerospace assistance" STATE-OF-THE-ART FOR DYNAMIC LINE RATING TECHNOLOGY Future Vision Kresimir Bakic, CIGRE & ELES, Slovenia
Qualifying Photonics for the Space Environment
Qualifying Photonics for the Space Environment Iain McKenzie Trieste 20/02/2015 ESA Presentation Iain McKenzie Trieste 20/02/2015 TEC-MME ESA ESTEC Slide 1 Qualifying Microphotonic Devices for Space 15
Indiana's Academic Standards 2010 ICP Indiana's Academic Standards 2016 ICP. map) that describe the relationship acceleration, velocity and distance.
.1.1 Measure the motion of objects to understand.1.1 Develop graphical, the relationships among distance, velocity and mathematical, and pictorial acceleration. Develop deeper understanding through representations
Corrosion Reliability Inspection Scheduling CRIS-Joint Industry Project
August Newsletter: Corrosion Reliability Inspection Scheduling CRIS-Joint Industry Project A joint industry project CRIS was launched in December 2000 to complete the work started in RACH. RACH (Reliability
Flow Sensors. - mass flow rate - volume flow rate - velocity. - stream line parabolic velocity profile - turbulent vortices. Methods of measurement
Flow Sensors Flow - mass flow rate - volume flow rate - velocity Types of flow - stream line parabolic velocity profile - turbulent vortices Methods of measurement - direct: positive displacement (batch
DETERMINATION OF WOOD MOISTURE PROPERTIES USING CT- SCANNER IN A CONTROLLED ENVIRONMENT
DETERMINATION OF WOOD MOISTURE PROPERTIES USING CT- SCANNER IN A CONTROLLED ENVIRONMENT Cherepanova, E. 1 & Hansson, L. 2 ABSTRACT The aim of the present work was to examine the existing algorithm for
NDT to Identify Concrete Bridge Deck Deterioration
NDT to Identify Concrete Bridge Deck Deterioration Nenad Gucunski Rutgers University Department of Civil and Environmental Engineering Center for Advanced Infrastructure and Transportation (CAIT) April
Physical Science Study Guide Unit 7 Wave properties and behaviors, electromagnetic spectrum, Doppler Effect
Objectives: PS-7.1 Physical Science Study Guide Unit 7 Wave properties and behaviors, electromagnetic spectrum, Doppler Effect Illustrate ways that the energy of waves is transferred by interaction with
Nanping Weishi LVL Scaffold Plank Brochure
Nanping Weishi LVL Scaffold Plank Brochure Weishi Wood Inudstry Co., Ltd. is PFS Certified Mill. Weishi Planks are OSHA Compliant Products. Weishi Team is Aimed to Offer You the Best Quality and Service.
Sterilization methods and equipment Lab 1-2
Sterilization methods and equipment Lab 1-2 PHT 434 Sterilization Sterilization a process that by which all viable M.O are removed or destroyed, based on a probability function. Sterilization concept Sterilization
Electromagnetic (EM) waves. Electric and Magnetic Fields. L 30 Electricity and Magnetism [7] James Clerk Maxwell (1831-1879)
![Electromagnetic (EM) waves. Electric and Magnetic Fields. L 30 Electricity and Magnetism [7] James Clerk Maxwell (1831-1879)](/thumbs/40/20813653.jpg "Electromagnetic (EM) waves. Electric and Magnetic Fields. L 30 Electricity and Magnetism [7] James Clerk Maxwell (1831-1879)")
L 30 Electricity and Magnetism [7] ELECTROMAGNETIC WAVES Faraday laid the groundwork with his discovery of electromagnetic induction Maxwell added the last piece of the puzzle Heinrich Hertz made the experimental
Well-logging Correlation Analysis and correlation of well logs in Rio Grande do Norte basin wells
Well-logging Correlation Analysis and correlation of well logs in Rio Grande do Norte basin wells Ricardo Afonso Salvador Pernes (March, 2013) ricardo.pernes@ist.utl.pt Master thesis Abstract During drilling
Technical Data Sheet. Plasterboard MSZ EN 520
Standard gypsum RB (A; GKB) Paper: grey Text: black Thickness [mm] 9,5 12,5 15 Core density (cca.) [kg/m³] 710 Unit mass (cca.) [kg/m²] 7 8,8 11,2 Combined water [%] >18 Total water absorption [%] Surface
In April this year, Southwest Airlines flight 812 ENGINEERING & MAINTENANCE
Testing times for structural integrity: NDT to the rescue Non-destructive testing is a technique employed in a number of different industries to verify structural integrity, but what requirements are specific
BETONYP building boards. The modern way of living.
BETONYP building boards The modern way of living. Tough for 30 years. Healthy, debarked pine wood and cement: the raw materials used to produce one of our most successful products for more than three decades.
DESIGN OF AIRCRAFT STRUCTURES UNDER SPECIAL CONSIDERATION OF NDT H. Assler, J. Telgkamp Airbus Deutschland GmbH, Hamburg, Germany
DESIGN OF AIRCRAFT STRUCTURES UNDER SPECIAL CONSIDERATION OF NDT H. Assler, J. Telgkamp Airbus Deutschland GmbH, Hamburg, Germany Abstract: The present paper takes a critical view on aircraft development,
CERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011
CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS