Secure Power Series Generator Solutions YOUR POWER IN SAFE HANDS

Transcription

1 Secure Power Series Generator Solutions YOUR POWER IN SAFE HANDS

2 Secure Power Generator Solutions Secure Power Series from Dale Power Solutions Contents 1 Introduction 2 General Product Matrix 3 Generator Solutions 4-5 Secure kVA 6-7 Secure kVA 8-9 Key Features 10 Secure kVA 11 Case Studies 12 Bespoke Generator Projects 14 Generator Refurbishment 15 Generator Exchange Control Systems Marine and Oil & Gas Solutions 22 Manufacturing Excellence 23 Dale Demand Response 24 Total Power Solutions 25 Worldwide Service & Support 26 Corporate & Social Responsibility 27 Settings New Standard 28 Dale Power Solutions Overview Your power in safe hands.

3 The Dale Secure Power Series The Secure Power Series sets the benchmark for the most comprehensive range of standard and specially designed diesel generator and gas turbine solutions. Generator solutions for everyone The Secure Power Series features standard open and canopied Secure Power diesel generators, the premium, super silent Secure + Power containerised generator for high specification applications such as for generator rental markets and the fully configurable Secure Power projects for all industrial applications demanding a variety of features. Whether you require a standard cost effective generator or synchronising capabilities for power station applications the Secure Power Series is the solution for you. User-friendly design Built with the end user in mind, The Secure Power Series can be controlled and monitored externally, offering improved health and safety benefits. Design with service and maintenance in mind The Secure Power Series has been designed to allow efficient servicing, including dual side door access and coupled with longer periods between oil changes, equates to a higher level of service and usability. Unmatched company pedigree Dale Power Solutions gives you the confidence of excellence in design, manufacturing and testing products built up since Worldwide warranty and support Dale s superb Secure Power Series of generator solutions is backed by our global warranty and service support giving you total peace of mind. Access to the finest components Dale s ability to design and build world-class products is aided by a worldwide supply chain for all major components. Reliable Secure Power solutions for every application From concept and design, right the way through to manufacture and installation, delivering turnkey power solutions, covering all aspects of our customer s precise power requirements. Outstanding efficiency Using modern, fuel efficient diesel engines, the Secure Power Series offers low fuel consumption and reduced exhaust emissions combined with high power output. Exceptional noise protection Dale Power Solutions provides superior heavy-duty low noise generators for sensitive areas where low noise is of paramount importance. High ambient cooling The Secure + models are available with a high ambient cooling option for operation in extreme temperature environments. Modern control systems expertly installed Dale Power Solutions control panel design and manufacturing, combined with Dale s software expertise, ensures that a new, bespoke control system exactly matches your requirements. 01

4 Secure Power Generator Solutions Generator Product Matrix At a glance 50Hz Standby Power (kva) Prime Power (kva) Secure Canopied Range Secure Open Range Secure + Containerised Range Hz Standby Power (kva) Prime Power (kva) Secure Canopied Range Secure Open Range Secure + Containerised Range

5 Secure Power when you need it Dale Power Solutions Secure Power Series offers a full range of diesel generators with power output ranging from 7.5 kva to 3,300 kva and beyond and gas turbine repackaging capabilities. Our range of generator solutions provides you with dependable power no matter what business you are in. We also provide a comprehensive range of elective accessories and supply ancillary items as standard or custom designed to meet your specific site requirements. We design and supply a full collection of generator control systems with guaranteed flexibility providing total control of your installations. Secure is a range of diesel generators with open and canopied options from 7.5kVA to 3000kVA. Available with rapid product availability, proven reliability, operational flexibility and low lifecycle costs. Secure + offers a pre-designed range of containerised diesel generators from 500kVA to 2500kVA applicable to both permanent and temporary applications. For endless custom-designed generator solutions Secure is a range of innovative engineering solutions that meets the most challenging application requirements. With open and containerised diesel generators from 500kVA to 3300kVA and beyond and gas turbine repackaging projects our team of expert engineers are with you every step of the way working to your specific requirements. 03

6 Secure Power Generator Solutions Secure Generator Sets Open & Canopied Diesel Generators Power Range 7.5kVA 3000kVA FEATURES 3 Heavy-Duty Engine Rugged 4-cycle industrial diesel delivers reliable power, low emissions and fast response to load changes. 3 Optional Excitation Boost System (EBS) Offers enhanced motor starting and fault clearing short circuit capability. 3 Alternator Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings, low waveform distortion with non-linear loads and fault clearing short-circuit capability. 3 Control system Microprocessor-based generator set monitoring and control system provides a simple operator interface to the generator set, manual and remote stop/start control and shutdown fault indication. 3 Cooling system Standard radiator system, designed and tested for rated ambient temperatures, simplifies facility design requirement for rejected heat. 3 Enclosures Weather-protective and soundattenuated enclosure. 3 Rapid product availability 3 Proven reliability and low life-cycle costs 3 High efficiency and operational flexibility 3 Optional factory-integrated exhaust after treatments reduce emissions for high-hour use in environmentally sensitive locations. 3 Durable and efficient diesel engines giving fuel economy and low exhaust emissions. 3 Fully flexible multifunction digital controllers 3 Bunded base mounted fuel tanks to minimise the risk of environmental damage due to fuel spillage and compliant to the DEFRA PPG2 (pollution prevention guidelines). 3 Automatic mains failure build specification including fully automatic controls panels, engine starting battery charger and engine water heater to ensure improved starting and load acceptance in the event of a failure in the mains supply. 3 All systems are backed by the Dale Power Solutions warranty package with optional maintenance agreements including 24/7 product support. 04

7 SPECIFICATIONS Model Nominal Standby Nominal Prime Ratings at 50Hz Ratings at 50Hz Engine Alternator Optional Frequency kva kw kva kw Model Alternator Hz C8 D X1.3G2 PI044D - 50 C11 D X1.3G3 PI044E - 50 C17 D X2.5G2 PI044G - 50 C22 D X2.5G2 PI144D - 50 C28 D X2.5G2 PI144F - 50 C33 D X3.3G1 PI144G - 50 C38 D X3.3G1 PI144H - 50 C44 D S3.8G4 UC224C - 50 C55 D S3.8G6 UC224D - 50 C66 D S3.8G7 UC224F - 50 C90 D BTA5.9G5 UCI224G - 50 C110 D BTA5.9G5 UCI274C - 50 C150 D BTA5.9G2 UCI274E - 50 C175 D5e QSB7G5 UCI274F - 50 C200 D5e QSB7G5 UCI274H - 50 C220 D5e QSB7G5 UCI274H - 50 C250 D CTAA8.3G2 UCDI247J - 50 C275 D QSL9G5 UCDI247K - 50 C300 D QSL9G5 HCI4D - 50 C330 D QSL9G5 HCI4D - 50 C350 D NT855G6 HCI4E - 50 C400 D NT855G4 HCI4F - 50 C440 D NTA855G7 HCI4F - 50 C500 D5e QSX15G8 HCI5C - 50 C QSX15G8 ECO40-3S HCI534D 50/60 C VTA28G5 ECO40-2L HCI534F 50/60 C QSK23G3 ECO43-1SN HCI634G 50/60 C QST30G3 ECO43-2SN HCI634H 50/60 C QST30G4 ECO43-1LN HCI634J 50/60 C KTA50G3 ECO43-2LN PI734B 50/60 C KTA50G8 ECO43-VL/4 PI734C 50 C QSK50G4 ECO46-1S PI734C 50/60 C * 1456* 1615* 1290* KTA50G9 ECO43-VL/4 PI734B 60 C QSK60G3 ECO46-2S/4 PI734F 50/60 C QSK60G4 ECO46-1L/4 PI734F 50/60 C * 2036* 2300* 1840* QSK60G6 ECO46-1L/4 PI734G 60 * 60Hz rating - model available 60Hz only APPLICATION Healthcare, Financial & Data Centres, Rental, Oil & Gas, Industrial, Telecommunications, Utilities, Power Generation, Server, Networking, IT, Emergency Services, Defence, Retail, Transportation, Broadcasting and Communications, Leisure and Sport, Government, Education 05

8 Secure Power Generator Solutions Secure + Containerised Diesel Generators 500kVA to 2500kVA FEATURES 3 Fully bunded, CSC plated 20ft or 40ft ISO high cube container 3 Multifunction digital controller incorporating engine and alternator protections with LCD metering display 3 Corner fixings to ISO1161 designed to provide a four point lift 3 Walk round design and weather protected 3 Single compartment design for engine driven radiators 3 Dual compartment design for high ambient remote radiators 3 Removable acoustic chevron louvres with bird grilles and internal baffles 3 Double/single folio access doors on each side of the container to provide outstanding access for maintenance 3 External lockable access door to generator control panel and circuit breaker mounted recessed on the outside of the container complete with stainless steel door hinges & locks, control panel viewing window with weather-proof seal, access to DC isolator switch, engine static battery charge, alternator AVR and engine governor controller 3 Recessed external fuel fill point cabinet 3 Radiators designed for cooling in high ambient temperatures or confined spaces 3 Internally mounted & insulated box type exhaust silencer 3 24 hour capacity bunded fuel tank 3 Container shot blasted and finish painted white RAL Dual frequency, switchable 50/60Hz 3 Available in Silent, Critical, Super Silent enclosures 06

9 Model Nominal Standby Nominal Prime Nominal Standby Nominal Prime Ratings at 50Hz Ratings at 50Hz Ratings at 60Hz Ratings at 60Hz Engine Alternator Model Alternator option kva kw kva kw kva kw kva kw Secure QSX15G8 ECO40-3S HCI534D Secure VTA28G5 ECO40-2L HC1534F Secure QSK23G3 ECO43-1SN HCI634G Secure QTS30G3 ECO43-2SN HCI634H Secure QTS30G4 ECO43-1LN HCI634J Secure KTA50G3 ECO43-2LN PI734B Secure KTA50G8 ECO43-VL/4 PI734C Secure QSK50G4 ECO46-1S PI734C Secure KTA50G9 ECO43-VL/4 PI734B Secure QSK50G3 ECO46-2S/4 PI734F Secure QSK50G4 ECO46-1L/4 PI734F Secure QSK60G6 ECO46-1L/4 PI734G The Secure + Power Series sets new parameters for flexible, off-the-shelf containerised generators. Power options offer greater variety of application and use, breaking the mould for a fully configurable range of 20ft or 40ft high cube containerised generators. Outstanding power output, compact size and ease of transportation make the series perfect for infinite applications worldwide. The Secure + Power Series models are available with a 55 C ambient cooling option for operation in extreme temperature environments. The Secure + Power Series generators are supplied in fully bunded containers, protected against any leakage of diesel or lubricants. The high capacity fuel tank is also fully bunded within the container, with all bunding complying to PPG2 DEFRA guidelines. Engine exhaust emissions comply with the very latest standards. 3 Genuine 55 C high ambient cooling 3 Noise levels: Silent 85dBA, Critical 80dBA, and Super Silent 73dBA at 1 metre 3 Large fully bunded fuel tank, 8 or 24 hour capacity 3 Synchronised capabilities generator generator or generator mains 07

10 Secure Power Generator Solutions Key Features Stainless steel door furniture Removable acoustic double chevron louvres with bird grilles and internal baffles Inverter start variable speed cooling fans in the radiator and engine compartments. Temperature/ load controlled to minimise noise emissions 8 or 24 hour capacity double skinned fuel tank to comply with the most stringent environmental legislation Double access doors for ease of maintenance External control panel access Engine governor controller located in the main control panel with external access Double rated busbar connections with external access and microswitch protection shroud 08

11 Triple Racor fuel water separator filters for online filter change without generator shutdown Container fully bunded for retention of oil, fuel and water with a steel durbar floor Low noise dual skinned box type exhaust silencers and exhaust lagging Recessed, external emergency stop buttons Optional Powerlock connectors provide fast and easy connectivity Dual external fill point from both sides of the container providing constant access for refill and replenishment including level gauges, leakage protection and alarm warning Push fit fuel connectors for external fuel tank use Tough, resilient double insulated alternator winding protection for harsh environments 09

12 Secure Power Generator Solutions Secure Infinity Ground Breaking Containerised Diesel Generator Solutions built to your specification 500kVA to 3300kVA Scan me with your smartphone to view our Bespoke Generator Video OPTIONS INCLUDE: 3 Power range kVA 50Hz, kVA 60Hz 3 Voltage options V, 6-11kV 3 Engineered acoustic solutions down to 65dBA at 1 metre 3 Genuine 55 C high ambient cooling 3 Remote radiator cooling packages 3 A60 fire rated and blast-proof containerised oil and gas applications 10

13 Case Studies Data Centre A major financial institution required new standby generator units for one of it s data centre sites. The existing generator units had come to the end of their useful working life and the load connected to the units had continued to increase. The requirements were to install 3 x 1250 kva generator units externally of the existing building. The solution was provided by three Dale Secure Infinity generators each rated at 1250 kva. STOR An NHS Trust responsible for a busy hospital wanted to take advantage of the revenue from STOR, provided by the National Grid to get an income from their installed standby generators. Dale Power Solutions were able to design a bespoke controls upgrade to allow their generators to run in parallel when demanded by STOR and export unused capacity to the grid. A pre tested and engineered control solution was designed, manufactured and installed by the Dale on-site team, carefully project managed to insure the least amount of disruption to the day to day running of the Hospital. Temporary generators also managed by the Dale team ensured that should a power failure occur during the upgrade, reliable generators were in place to provide life critical power to the Hospital. The generators needed to meet a low noise level of 65 dba at 1 metre, and needed to incorporate a local control panel, daily fuel tank and fire suppression system. The acoustic enclosures had to be designed for either mounting on a pre-formed concrete plinth or on a steel support structure, to enable two generator units to be mounted within the same footprint, to increase the total standby system power density. Each generator container was suitably handed for both the power cable connection and with the external exhaust arrangement differing on all three units to meet the space and location requirements. The units were fully tested at our factory test bay, prior to installation and commissioning at site against the full site generator open protocol control system supplied by Dale Power Solutions. The revenue from STOR enabled the CAPEX required to be paid back within 24 months and continuing payments used to fund other critical projects on site. The generators were being utilised and run on load for up to 50 hours per year, this ensured that they were always ready to take the Hospital load should a power failure occur. 11

14 Secure Power Generator Solutions Bespoke generator projects for every application Tailored products to meet your exact specification. Trusted for the most demanding applications Dale s bespoke generator packages are built for the most demanding of applications including both onshore and offshore, marine, oil & gas and healthcare applications. Design excellence since 1935 Our qualified engineers draw on years of experience in meeting and exceeding customers expectations. Global capability from design to commissioning Dale has vast, global experience in design, project management, testing, installation and commissioning. Meeting the highest standards Our products comply with the highest international specifications, including ISO 9001, and global health and safety and environmental requirements. Purpose-built manufacturing facility Dale s purpose-built manufacturing facility has 60-tonne material handling capability for even the largest project requirements. 12

15 Open and containerised diesel generator and gas turbine repackaging projects from Dale Power Solutions provide the complete professional secure power solution. Expert project management, installation and commissioning Your system is in expert hands. Project managers work with you to plan, control and co-ordinate everything from order placement, design and manufacture to installation. Our engineers join you on site to install and commission your equipment. Reliable Secure Power solutions for every application From concept and design, right the way through to manufacture and installation, delivering turnkey power solutions, covering all aspects of our customer s precise power requirements Upgrade and refurbishment 3 Dale provides engineered solutions to upgrade and refurbish your existing standby generator systems to meet your immediate and future operating requirements. Plant room design and installation 3 Standby generator units selected and designed to meet your specific plant room and operational requirements 3 Tailored generating set fuel supply systems integrated with the daily service fuel and bulk fuel tanks. 3 Ventilation system including essential noise attenuation, duct work and fans to meet the most demanding environmental constraints. 3 Engine exhaust silencers integrated with building flue systems, including emission optimised solutions. 13

16 Secure Power Generator Solutions Generator Projects Gas Turbine Repackaging After Refurbishment Before Refurbishment A typical 'zero hours' refurbished gas turbine generator package from Dale Power Solutions would include: 3 'Zero hours' refurbished gas turbine and reduction gearbox 3 12 months warranty on all refurbished units 3 Refurbished alternator 3 New/refurbished fuel skid 3 New/refurbished generating set enclosure 3 New/refurbished generator skid 3 Air filtration system 3 Lubrication system 3 Upgraded or new controls 3 Factory acceptance testing 3 Site and system integration testing 14

17 Zero hours and exchange Gas Turbine Generators A zero hour gas turbine generator will offer the same features and specifications as a new manufactured turbine with up to 40% cost saving on a brand new gas turbine.** Shortened lead times mean that your site can be operational in less time when compared to a typical new machine. Dale Power Solutions factory 2 is a purpose built packaging and refurbishment facility with over 60 tonne lifting capacity and gas turbine generator testing capability. In house control panel design and manufacturing capabilities together with software engineers mean that all Dale Power Solutions control systems are matched exactly to the gas turbine. Our upgrades will meet your need to increase capacity and to comply with the latest environment standard. Site visits are made before a cost effective and future proof solution is offered. ** Cost saving based on typical like for like machines. TYPICAL ZERO HOURS REFURBISHED GAS TURBINES: NOMINAL CONTINUOUS RATINGS AT ISO CONDITIONS Nominal Power kw Heat Rate kj/kwh Fuel Input kw Efficiency % Exhaust Gas Flow kg/s Exhaust Gas Temp. C Improved capacity & environmental compliance An upgraded and refurbished gas turbine generator provided by Dale offers increased capacity and complies with the latest environmental standards. Faster generator power availability Our refurbished gas turbine generators offer a shorter operational lead time compared to new machines. Fuel systems 3 Fuel system upgrades including conversion from gas only fuel systems to dual fuel with both gas and liquid. 3 These can be incorporated onto the existing skid or a replacement skid can be engineered into the existing housing. Packaging 3 The gas turbine generator acoustic housing can be refurbished, replaced or upgraded. 3 Lower noise levels for residential areas. 3 Paint system upgrade for severe environments. 3 ATEX approved. 3 All generator skid components can be either repaired or replaced with new parts. Cost saving against as new product An overhauled zero hours gas turbine generator offers the same features and specification as new but with a 40% cost saving. New controls 3 Dale design and manufacture bespoke control systems specifically designed for gas turbines. 3 Upgrade of relay logic controls. 3 Our team of software engineers are able to engineer PLC based replacement or new controls. 3 PLC control options include Mitsubishi, Siemens, Allen Bradley and metso platforms. Up to 20 MW Units 3 New control systems 3 Control system upgrades 3 Fuel system upgrades Dual fuel Fuel conversions DLE 3 Acoustic packaging 3 Air filtration 3 Remote coolers Gas turbines expertise All units can be configured as required. We also have exchange power turbines, accessory and reduction gearboxes, as well as ancillary package parts such as fuel controls, pumps, motors and PLC control cards. 15

18 Secure Power Generator Solutions Secure Generator Control Systems FEATURES INCLUDE: 3 Key start for basic and off prime power requirements 3 Auto/ remote start for standby and emergency power applications 3 Generator synchronisation capabilities for load sharing with other generators 3 Mains synchronisation used for precise load requirements and/or export of the national grid mains supply 3 Fuel transfer systems for managing the critical fuel supply to generators 3 Remote monitoring users can monitor multiple systems, alarms, fault signals and fuel systems from a single PC. Connected PCs display continuously updated information from the generator or system controller about each generators operating condition. Input values and operational parameters can be easily viewed. Valuable information such as generator usage data, alarm history and predictive maintenance reminders are easily accessible. 16

19 Dale Power Solutions understand that control systems are essential to the efficient operation of our generator sets. Our control systems are designed to be flexible enough to handle the variable demands required for applications such as data centres, hospitals and in support of vital utilities such as gas, water and power. Dale Power Solutions range of diesel powered generator sets have been developed with our user in mind. Our generator control systems are easy to use and deliver unrivalled functionality. If it s a simple manual start control module or a complex controller with an advanced PLC functionality, Dale Power Solutions have the right tools and engineering expertise to design the perfect system for your diesel generator. Complete support Whether a new installation or a retrofit, Dale Power Solutions has the dedicated professionals with proficiency in power engineering to make even the most challenging operating systems simple. Total control at your fingertips Bespoke integrated power management systems are built and tested to your exact specification at our purpose built facility. Guaranteed control As the specialist for all products and systems, Dale Power Solutions guarantees the long term functionality and safe operation of the system, providing services, spare parts, troubleshooting and product updates. Dale control systems Our control systems are designed and manufactured incorporating the latest intelligent microprocessor generator controllers and optional Dale programmable logic controllers (PLC) system to meet more complex operational functions. All design is in-house by our electrical and software design team. Core competencies 3 Design and engineering 3 Manufacturing and procurement 3 Programming 3 Site integration testing and commissioning 3 Support and troubleshooting 3 Service and maintenance support Flexible control Dale Power Solutions generator control systems are modular and can be easily scaled up to suit various applications. 17

20 Secure Power Generator Solutions Marine and Oil & Gas Generator Solutions We manufacture generator systems suitable for virtually every marine and offshore application including the following: 3 Floating Production, Storage and Offloading Vessels (FPSO) 3 Offshore Platforms Mobile 3 Offshore Platforms Fixed 3 Commercial Vessels 3 Naval Vessels 3 Low Magnetic Signature applications 3 Bespoke design applications 3 Enclosed and sound attenuated enclosure systems and harsh offshore environment applications including wave resistant designs. 3 Base-frame and enclosure designs certified to DNV where required. 18

21 Dale Power Solutions combines over 78 years of power generation experience with a commitment to high quality generator solutions making it the ultimate safe and reliable choice for demanding Marine and Oil & Gas applications, worldwide. Providing power to marine vessels and naval operators, Dale Power Solutions diesel generators and integrated control systems play a pivotal role in providing reliable operations and safety to these operators. We are focused on providing auxiliary and emergency power solutions to the commercial marine industry and naval customers, where dependability is of vital importance. We provide suitable generator systems for virtually every application. All of our power solutions are designed to meet the relevant requirements of: 3 Client specifications and design engineering practise specifications 3 Site conditions and environment 3 Emissions legislations onshore and marine 3 Area classification including rig-safe and zone specifications 3 Marine classification societies applicable rules and standards 3 Special features including: fire detection, water fog and gaseous fire suppression, electrical switchgear, expanded control, power manage-specific application requirements Dale Power Solutions has in-house engineering capability in order to provide you with a generator configuration to best suit your specific application and budget. 19

22 Secure Power Generator Solutions CO 2 fire and gas system Access to controller from outside of the container Local control panel MTU diesel engine V20 Lube oil centrifuge ASME flanged cooling pipework connections Fire and gas system claxon Gas detection 20

23 Engineered Solutions for the Marine and Oil & Gas Industry A global oil and gas exploration company required additional electrical power generation on one of their offshore platforms in the Middle East. The challenge The main electrical power supply to the platform is provided via a 33kV subsea cable link of over 40km. The requirement was to install two new generators of 2MW each, to cater for the additional power requirement. The Solution Dale Power Solutions provided two bespoke generator sets, designed and built to suit the customer s specific requirements, with both units rated for continuous operation providing an output of 2500kVA, 2000kW at 0.8 power factor at 6600 volts. The sets were designed by Dale to provide optimal power quality and to operate in harsh offshore environmental conditions including temperatures of up to 50 degrees centigrade and in the corrosive saline atmosphere. During this project, Dale Power Solutions faced several key challenges in order to install the two diesel generators on the platform. The first was the limited footprint area available on deck that required us to engineer the generator sets to fit within the tight space constraints of 13.5m (L) x 2.4m (W) x 5.7m (H). Our solution was to mount the radiator and fuel tank externally on to the roof of each generator to ensure that we met our customer s exacting requirements. The second challenge to overcome was the weight of the units which exceeded the capabilities of the platform s crane which would be manoeuvring the generators into their final position. Our solution was to apply a modular system design, allowing for the removal of fuel tanks and radiators from the roof of the generators, thereby reducing the single-lift weight to 36,000kg in order to comply with the lifting limit. Prior to dispatch, the sets were tested at our factory, witnessed by a team of engineers from the client. Testing included: protections system, control system, loaded operation, voltage regulation, speed governing and parallel operation in order to fully demonstrate the system in accordance with the project specification. Link box Air filters Ease of maintenance Coolant pipework and valves Fire and gas control panel HMI screen remote control panel Interior cooling fan and isolators Multiple double access doors 21

24 Secure Power Generator Solutions Secure Power Series Manufacturing Excellence Since 1935 Our extensive purpose built manufacturing facility has a 60 tonne material handling capability, qualified and experienced production and test engineers and integrated facilities for both resistive and reactive loadbank testing. We are experts in the manufacture and test of low and medium voltage generators. Our tailor made manufacturing facilities, together with forward management and stocking of major components allows Dale Power Solutions to respond to high volume demands. 22

25 Dale Demand Response Generating income from your diesel generator Dale Power Solutions Short Term Operating Reserve (STOR) programme creates revenue from your standby generating capacity. With Dale Power Solutions STOR programme, you provide the National Grid access to your standby generators, and get money in return. In fact, you ll get paid twice - one regular amount for being on standby, and then extra revenue whenever your electricity is needed. How does STOR work? Dale Power Solutions communicates directly with your diesel generator or electrical consuming equipment, enabling the National Grid to start standby generators and turn down your electrical consumption at short notice and for short periods across the UK. This helps to keep the UK s power supply stable in times of stress. When the electrical demand spikes, the national grid finds it much easier to manage these through calling upon a small scale local supply instead of bringing in a major power station. A consistent payment is made to you for having your power generating capacity available to the national grid. The implementing payments are made when your generator is called upon to help with this electrical demand. How will STOR benefit me? 3 Enjoy a new revenue stream utilising an existing asset 3 Earn more money and reduce your maintenance costs 3 Guarantee your generator will work when you need it and earn revenue when you don t 3 Eliminate the need for expensive and time consuming load bank testing 3 Improve your green credentials 3 No costs, no obligation, no risk 3 Multiple payments for multiple generators Get started now by reducing your energy usage and you could receive your first payment within a few weeks. Don t have a generator yet? Speak to a member of our generator sales team to talk about your power requirements & start earning money +44 (0) Making energy more affordable Energy Performance Partnership Identifying the right strategy for you Helping you use less energy Reducing the cost of your energy Maintenance costs down Earn Make money from your generator 3 Generate Revenues 3 Improve Grid Reliability 3 Help the Environment Low cost maintenance and peace of mind 23

26 Secure Power Generator Solutions The Total Secure Power Solution Since 1935, Dale Power Solutions has been providing customers around the world with technical excellence in providing technologically advanced product solutions, expertly project managed and supported by tailored service packages. Remote monitoring users can monitor multiple systems, alarms, fault signals and fuel systems from a single PC or mobile device. UPS and generator together true no break solution Our total secure power solution integrates UPS and generator together where the UPS supports critical loads without interruption until the generator kicks in. With our no-break power solution we can ensure your business continuity without costly downtime. 24

27 Worldwide Service & Support Diesel generator servicing Regardless of the number, manufacture and location of your generators you can rely on Dale Power Solutions to provide peace of mind and ensure your generator will be available when required. 3 Planned preventative maintenance minor and major scheduled maintenance inspections 3 Predictive maintenance ensuring normal operation with oil sampling helping to reduce quantities of waste 3 Fleet management multi-site, multi-set management of your fleet of generators anywhere 3 Waste disposal providing environmentally ethical and compliant disposal and recycling services 3 Exhaust treatment equipment helps reduce emissions 3 OFTEC qualified fuel tank inspections all of our engineers are qualified to inspect and recommend replacement where required 3 Assistance with environmental awareness we support your business in meeting its environmental obligations 3 Coolant cleaning and recycling to keep your equipment running smoothly 3 Radiator cleaning and refurbishment increase the efficiency of your equipment without complete replacement 3 Fuel management including sampling and polishing ensuring maximum efficiency of your equipment 3 Control system management ensuring your equipment meets the latest technology 3 System enhancements and upgrades prolonging the life of your equipment Local support worldwide setting the benchmark in customer support Gas turbine servicing Gas turbine technology is a continuous process for industries demanding high availability. Dale Power Solutions can supply fully trained field service engineers and technicians who have many years of hands on experience to look after all aspects of the operation and maintenance of a wide range of turbine power and gas engine generators. The installation and operation of data collection equipment enables preventative maintenance procedures to be applied. Our services include: 3 Start-up and commissioning 3 Customised maintenance inspection programmes 3 Monthly, quarterly, semi-annual or annual inspections 3 Relay logic and PLC control systems 3 Compressor and power generation packages 3 Work on all associated on skid equipment 3 25 years experience of gas turbine packaging 3 Independent inspections of most types of gas turbines and ancillary equipment 3 Vibration surveys 3 Boroscope inspections 3 Laser alignment and equipment balancing 3 Remote monitoring and trending 3 Fuel control system upgrades 3 Strip down inspection reports 25

28 Secure Power Generator Solutions Dale Power Solutions Corporate & Social Responsibility Operating in a responsible and sustainable manner is important to Dale Power Solutions. Whilst we run our business in line with the expectations of our stakeholders, we also see corporate responsibility as a discipline that helps us to manage risks and maximise on the opportunities presented to us in a changing world. We take our corporate responsibility seriously across the Company as an employer, manufacturer, investor and a consumer. We are committed to understanding, monitoring and managing our social, environmental and economic impact to enable us to contribute to society s wider goal of sustainable development. We aim to demonstrate these responsibilities through our actions and within our corporate policies. Environment We recognise the importance of understanding the impact of our activities on the environment and we are developing an Environmental Programme to demonstrate and benchmark our commitment. Our company is accredited to ISO and we are continually looking at ways to improve our efficiency across our sites. We promote energy and water efficiency, waste reduction, and reduction of potentially dangerous, volatile or environmentally damaging chemicals. We also have an ongoing commitment to reducing our carbon footprint. Health & Safety We shall provide, and strive to maintain, a clean, healthy and safe working environment. Providing a workplace where our employees feel safe is not only a legal obligation, but a fundamental factor in building their engagement with the company. Through management intervention, awareness campaigns and a culture that encourages employees to raise concerns about the workplace safety, we aim to reduce the frequency of accidents. Our SHE Team promotes and develops cooperation between all employees to ensure health and safety management is embedded into management and business processes. This is supported by our Health & Safety Policy. Community We are committed to making a sustainable positive impact on the communities in which we operate. We aim to make a distinctive contribution to equality and social development through the establishment of effective partnerships and programmes that make best use of the energies and skills of our employees. We support our employees in fundraising for charities and voluntary work, recognising both the benefit to the community and to the employees themselves. Dale Power Solutions believes that maintaining and improving the longevity of our technical excellence can only be achieved by a successful apprenticeship programme. Dale is therefore committed to the annual recruitment and development of apprentices and graduates to meet the future needs of the business. In doing so Dale will work with our local community, schools and colleges to promote and encourage students to undertake an apprenticeship. 26

29 Secure Power Solutions from Dale Power Solutions S E C U R E Standby Transportable Power Excellence in Design Compact Power Density Unmatched Service Coverage Reliable, Robust and Rugged Ethical and Environmentally Friendly Setting new standards Dale has put its immense experience of providing bespoke generating sets for a diverse global market into the design and production of the Secure Power Series. At-a-glance benefits 3 More power and flexibility 3 Genuine high ambient cooling for 55 C temperatures 3 International service network 3 Dual frequency and multi-voltage 3 Tremendous 800 kw step load power handling 3 Outstanding noise protection 3 Environmentally friendly 3 Total portability 3 Remote monitoring for ease of use and optimum performance 3 User-friendly design An unmatched history of continued supply of secure power solutions for the most demanding requirements worldwide, providing total customer satisfaction. The Dale brand provides the benchmark in power solutions for diverse global markets including: 3 Data Centres 3 Financial 3 Commercial 3 Retail 3 Medical 27

30 Secure Power Generator Solutions Dale Power Solutions Delivering secure back-up power across the globe Established since 1935, Dale Power Solutions has become a global leader in bringing technology and engineering together to create innovative solutions, protecting critical power supplies for customers through our standby power systems. With an annual turnover in excess of 30million, it is through Dale Power Solutions commitment to excellence, combined with our mission to deliver outstanding client service that has earned Dale Power Solutions its prestigious reputation it enjoys today as one of the world's most trusted providers of standby power solutions. Dale Power Solutions provides a comprehensive and bespoke design capability service to our customers, taking initial concepts through design, project management, manufacturing, installation and commissioning processes, followed by complete maintenance and servicing on a worldwide basis to more than 8,000 generators and UPS systems. Our professional structure, financial strength and the necessary quality assurance, health and safety, and product accreditations meet the demands of the world's most discerning clients. These accreditations include: Proud of our pedigree proud to be your partner. 28

31 Dale Power Solutions Ltd. Generator solutions for everyone Dale Power Solutions Ltd reserves the right to make changes in specification without notice or liability. All information is subject to Dale Power Solutions Ltd own data & is considered accurate at time of publishing.

32 Dale Power Solutions Ltd HEAD OFFICE, FACTORY 1, SCARBOROUGH Salter Road Eastfield Industrial Estate Scarborough North Yorkshire YO11 3DU Tel : produced by adverset media solutions limited FACTORY 2, FILEY Tel : ABERDEEN BRANCH Tel: LONDON BRANCH Tel: MIDDLE EAST BRANCH Tel: Your power in safe hands