Waveenergyfyn rapport
|
|
|
- Augustine Miles
- 8 years ago
- Views:
Transcription
1 Waveenergyfyn rapport The Crestwing final test projekt nr.1465 Bilags rapport fra Waveenergyfyn over projekt Crestwing final test PSO-F&U projekt nr.1465
2 mean PTO Load, mean mooring damping, wave 3 2D test no 51 mean PTO Load, mean mooring damping, wave 3 2D test no 53 mean PTO Load, mean mooring damping, wave 3 2D test no 55 high PTO Load, mean mooring damping, wave 8 3D test no 99 high PTO Load, mean mooring damping, wave 8 3D test no11 high PTO Load, mean mooring damping, wave 8 3D test no 13 mean PTO Load, mean mooring damping, wave 8 3D test no 57 mean PTO Load, mean mooring damping, wave 8 3D test no 59 mean PTO Load, mean mooring damping, wave 8 3D test no 61 low PTO Load, mean mooring damping, wave 8 3D test no 83 low PTO Load, mean mooring damping, wave 8 3D test no 85 low PTO Load, mean mooring damping, wave 8 3D test no 87 mean PTO Load, non mooring damping, wave 8 3D test no 19 mean PTO Load, non mooring damping, wave 8 3D test no21 mean PTO Load, non mooring damping, wave 8 3D test no 23 mean PTO Load, low mooring damping, wave 8 3D test no 44 mean PTO Load, low mooring damping, wave 8 3D test no 46 mean PTO Load, low mooring damping, wave 8 3D test no 48 mean PTO Load, mean mooring damping, wave 8 3D test no 73 mean PTO Load, mean mooring damping, wave 8 3D test no 76 mean PTO Load, mean mooring damping, wave 8 3D test no 78 mean PTO Load, mean mooring damping, wave 8 3D test no 8 Forsøgsresultater Resultaterne er, som i DHI s rapport Crestwing WEC Model Tests-Final-Rev. 2 14Jan11, opskaleret til fuldskala Nordsøen. Phase 1 Hydrodynamic Behaviour and Mooring Tests kn Fase 1: Mooring-force som funktion af "PTO load og mooring damping" Mooring force min Mooring force max Mooring force mean
3
4 Phase 2 Power Take Off (PTO) tests
5
6
7 Hull and hinge force measurement wave test no 219 Hull and hinge force measurement wave test no 221 Hull and hinge force measurement wave test no 222 Hull and hinge force measurement wave test no 223 Hull and hinge force measurement wave test no 268 Hull and hinge force measurement test no 231 Hull and hinge force measurement test no 233 Hull and hinge force measurement test no 229 Hull and hinge force measurement test no 235 Hull and hinge force measurement test no 237 konstant yav test no 241 konstant yav test no 24 konstant yav test no 242 Mooring buoy on surface test no 243 Mooring buoy on surface test no 244 Mooring buoy on surface test no 245 Mooring line connected to spring on tank bottom Mooring line connected to spring on tank bottom Mooring line connected to spring on tank bottom Mooring line connected to spring on tank edge test Mooring line connected to spring on tank edge test Mooring line connected to spring on tank edge test 2 way brake on PTO test no way brake on PTO test no way brake on PTO test no 253 PTO locked test no 274 PTO locked test no 275 PTO locked test no 276 Additionel wave, Hs=5,6m, Tp=9s test no 272 Phase 3 PTO and Mooring tests 45 kn Fase 3 Mooring-force Mooring force min Mooring force max Mooring force mean
8 Hull and hinge force measurement wave test no 219 Hull and hinge force measurement wave test no 221 Hull and hinge force measurement wave test no 222 Hull and hinge force measurement wave test no 223 Hull and hinge force measurement wave test no 268 Hull and hinge force measurement test no 231 Hull and hinge force measurement test no 233 Hull and hinge force measurement test no 229 Hull and hinge force measurement test no 235 Hull and hinge force measurement test no 237 konstant yav test no 241 konstant yav test no 24 konstant yav test no 242 Mooring buoy on surface test no 243 Mooring buoy on surface test no 244 Mooring buoy on surface test no 245 Mooring line connected to spring on tank bottom Mooring line connected to spring on tank bottom Mooring line connected to spring on tank bottom Mooring line connected to spring on tank edge test Mooring line connected to spring on tank edge test Mooring line connected to spring on tank edge test 2 way brake on PTO test no way brake on PTO test no way brake on PTO test no 253 PTO locked test no 274 PTO locked test no 275 PTO locked test no 276 Additionel wave, Hs=5,6m, Tp=9s test no kn Fase 3 PTO-force PTO force min PTO force max PTO force mean
9 Hull and hinge force measurement wave test no 219 Hull and hinge force measurement wave test no 221 Hull and hinge force measurement wave test no 222 Hull and hinge force measurement wave test no 223 Hull and hinge force measurement wave test no 268 Hull and hinge force measurement test no 231 Hull and hinge force measurement test no 233 Hull and hinge force measurement test no 229 Hull and hinge force measurement test no 235 Hull and hinge force measurement test no 237 konstant yav test no 241 konstant yav test no 24 konstant yav test no 242 Mooring buoy on surface test no 243 Mooring buoy on surface test no 244 Mooring buoy on surface test no 245 Mooring line connected to spring on tank bottom test no 246 Mooring line connected to spring on tank bottom test no 247 Mooring line connected to spring on tank bottom test no 248 Mooring line connected to spring on tank edge test no 263 Mooring line connected to spring on tank edge test no 264 Mooring line connected to spring on tank edge test no way brake on PTO test no way brake on PTO test no way brake on PTO test no 253 PTO locked test no 274 PTO locked test no 275 PTO locked test no 276 Additionel wave, Hs=5,6m, Tp=9s test no 272 kn 6 Fase 3 Hysterese-force Hystresis break min Hystresis break max Hystresis break mean Fase 3 Hull-force
10
11
12 Hull and hinge force measurement wave test no 219 Hull and hinge force measurement wave test no 221 Hull and hinge force measurement wave test no 222 Hull and hinge force measurement wave test no 223 Hull and hinge force measurement wave test no 268 Hull and hinge force measurement test no 231 Hull and hinge force measurement test no 233 Hull and hinge force measurement test no 229 Hull and hinge force measurement test no 235 Hull and hinge force measurement test no 237 konstant yav test no 241 konstant yav test no 24 konstant yav test no 242 Mooring buoy on surface test no 243 Mooring buoy on surface test no 244 Mooring buoy on surface test no 245 Mooring line connected to spring on tank bottom test no 246 Mooring line connected to spring on tank bottom test no 247 Mooring line connected to spring on tank bottom test no 248 Mooring line connected to spring on tank edge test no 263 Mooring line connected to spring on tank edge test no 264 Mooring line connected to spring on tank edge test no way brake on PTO test no way brake on PTO test no way brake on PTO test no 253 PTO locked test no 274 PTO locked test no 275 PTO locked test no 276 Additionel wave, Hs=5,6m, Tp=9s test no 272 Fase 3 Hull-force sb Fy Fy_s deck min Fy_s deck max Fy_s deck mean
13 Hull and hinge force measurement wave test no 219 Hull and hinge force measurement wave test no 221 Hull and hinge force measurement wave test no 222 Hull and hinge force measurement wave test no 223 Hull and hinge force measurement wave test no 268 Hull and hinge force measurement test no 231 Hull and hinge force measurement test no 233 Hull and hinge force measurement test no 229 Hull and hinge force measurement test no 235 Hull and hinge force measurement test no 237 konstant yav test no 241 konstant yav test no 24 konstant yav test no 242 Mooring buoy on surface test no 243 Mooring buoy on surface test no 244 Mooring buoy on surface test no 245 Mooring line connected to spring on tank bottom test no 246 Mooring line connected to spring on tank bottom test no 247 Mooring line connected to spring on tank bottom test no 248 Mooring line connected to spring on tank edge test no 263 Mooring line connected to spring on tank edge test no 264 Mooring line connected to spring on tank edge test no way brake on PTO test no way brake on PTO test no way brake on PTO test no 253 PTO locked test no 274 PTO locked test no 275 PTO locked test no 276 Additionel wave, Hs=5,6m, Tp=9s test no 272 Fase 3 Hull-force sb Fz Fz_p deck min Fz_s deck max Fz_s deck mean
14 Hull and hinge force measurement wave test no 219 Hull and hinge force measurement wave test no 221 Hull and hinge force measurement wave test no 222 Hull and hinge force measurement wave test no 223 Hull and hinge force measurement wave test no 268 Hull and hinge force measurement test no 231 Hull and hinge force measurement test no 233 Hull and hinge force measurement test no 229 Hull and hinge force measurement test no 235 Hull and hinge force measurement test no 237 konstant yav test no 241 konstant yav test no 24 konstant yav test no 242 Mooring buoy on surface test no 243 Mooring buoy on surface test no 244 Mooring buoy on surface test no 245 Mooring line connected to spring on tank bottom test Mooring line connected to spring on tank bottom test Mooring line connected to spring on tank bottom test Mooring line connected to spring on tank edge test Mooring line connected to spring on tank edge test Mooring line connected to spring on tank edge test 2 way brake on PTO test no way brake on PTO test no way brake on PTO test no 253 PTO locked test no 274 PTO locked test no 275 PTO locked test no 276 Additionel wave, Hs=5,6m, Tp=9s test no 272 Fx_s+Fx p deck scale Fx_s+Fx p deck min Fx_s+Fx p deck max Fx_s+Fx p deck mean
15 Hull and hinge force measurement wave test no 219 Hull and hinge force measurement wave test no 221 Hull and hinge force measurement wave test no 222 Hull and hinge force measurement wave test no 223 Hull and hinge force measurement wave test no 268 Hull and hinge force measurement test no 231 Hull and hinge force measurement test no 233 Hull and hinge force measurement test no 229 Hull and hinge force measurement test no 235 Hull and hinge force measurement test no 237 konstant yav test no 241 konstant yav test no 24 konstant yav test no 242 Mooring buoy on surface test no 243 Mooring buoy on surface test no 244 Mooring buoy on surface test no 245 Mooring line connected to spring on tank bottom test Mooring line connected to spring on tank bottom test Mooring line connected to spring on tank bottom test Mooring line connected to spring on tank edge test no Mooring line connected to spring on tank edge test no Mooring line connected to spring on tank edge test no 2 way brake on PTO test no way brake on PTO test no way brake on PTO test no 253 PTO locked test no 274 PTO locked test no 275 PTO locked test no 276 Additionel wave, Hs=5,6m, Tp=9s test no 272 Fy_s+Fy p deck scale Fy_s+Fy p deck min Fy_s+Fy p deck max Fy_s+Fy p deck mean
16 Hull and hinge force measurement wave test no 219 Hull and hinge force measurement wave test no 221 Hull and hinge force measurement wave test no 222 Hull and hinge force measurement wave test no 223 Hull and hinge force measurement wave test no 268 Hull and hinge force measurement test no 231 Hull and hinge force measurement test no 233 Hull and hinge force measurement test no 229 Hull and hinge force measurement test no 235 Hull and hinge force measurement test no 237 konstant yav test no 241 konstant yav test no 24 konstant yav test no 242 Mooring buoy on surface test no 243 Mooring buoy on surface test no 244 Mooring buoy on surface test no 245 Mooring line connected to spring on tank bottom test Mooring line connected to spring on tank bottom test Mooring line connected to spring on tank bottom test Mooring line connected to spring on tank edge test no Mooring line connected to spring on tank edge test no Mooring line connected to spring on tank edge test no 2 way brake on PTO test no way brake on PTO test no way brake on PTO test no 253 PTO locked test no 274 PTO locked test no 275 PTO locked test no 276 Additionel wave, Hs=5,6m, Tp=9s test no 272 Fz_s+Fz p deck scale Fz_s+Fz p deck min Fz_s+Fz p deck max Fz_s+Fz p deck mean
17 konstant yav test no 241 konstant yav test no 24 konstant yav test no 242 Mooring buoy on surface test no 243 Mooring buoy on surface test no 244 Mooring buoy on surface test no 245 Mooring line connected to spring on Mooring line connected to spring on Mooring line connected to spring on Mooring line connected to spring on Mooring line connected to spring on Mooring line connected to spring on 2 way brake on PTO test no way brake on PTO test no way brake on PTO test no 253 PTO locked test no 274 PTO locked test no 275 PTO locked test no 276 Additionel wave, Hs=5,6m, Tp=9s test Fase 3 Hull-force bb Fx Fy_p deck min Fx_p deck max Fx_p deck mean
18 Hull and hinge force measurement wave test no 219 Hull and hinge force measurement wave test no 221 Hull and hinge force measurement wave test no 222 Hull and hinge force measurement wave test no 223 Hull and hinge force measurement wave test no 268 Hull and hinge force measurement test no 231 Hull and hinge force measurement test no 233 Hull and hinge force measurement test no 229 Hull and hinge force measurement test no 235 Hull and hinge force measurement test no 237 konstant yav test no 241 konstant yav test no 24 konstant yav test no 242 Mooring buoy on surface test no 243 Mooring buoy on surface test no 244 Mooring buoy on surface test no 245 Mooring line connected to spring on tank bottom test Mooring line connected to spring on tank bottom test Mooring line connected to spring on tank bottom test Mooring line connected to spring on tank edge test no Mooring line connected to spring on tank edge test no Mooring line connected to spring on tank edge test no 2 way brake on PTO test no way brake on PTO test no way brake on PTO test no 253 PTO locked test no 274 PTO locked test no 275 PTO locked test no 276 Additionel wave, Hs=5,6m, Tp=9s test no 272 Fase 3 Hull-force bb Fy Fy_p deck min Fy_p deck max Fy_p deck mean
19 konstant yav test no 241 konstant yav test no 24 konstant yav test no 242 Mooring buoy on surface test no Mooring buoy on surface test no Mooring buoy on surface test no Mooring line connected to spring Mooring line connected to spring Mooring line connected to spring Mooring line connected to spring Mooring line connected to spring Mooring line connected to spring 2 way brake on PTO test no way brake on PTO test no way brake on PTO test no 253 PTO locked test no 274 PTO locked test no 275 PTO locked test no 276 Additionel wave, Hs=5,6m, Tp=9s Fase 3 Hull-force bb Fz Fz_p deck min Fz_p deck max Fz_p deck mean
20 Investigation of the efficiency Phase1 Investigation of the efficiency Phase 2 Investigation of the efficiency
21 Phase 3 Investigation of the efficiency Phase 4 Investigation of the efficiency when applying aft pontoon mooring lines
22 gearing 8 hyst, gearing 16 hyst, gearing 12 hyst, gearing 8 hyst,4 gearing 16 hyst,4 gearing 12 hyst,4 PTO test mean 4mm flywheel gearing 8 hyst, PTO test mean 4mm flywheel gearing 16 hyst, PTO test mean 8mm flywheel gearing 8 hyst, Power Take Off (PTO) tests in test bench(fase 5) Phase 5 PTO test i testbænk 1 kn PTO force testbench PTO force min PTO force max PTO force mean
23 gearing 8 hyst, gearing 16 hyst, gearing 12 hyst, gearing 8 hyst,4 gearing 16 hyst,4 PTO test mean 2mm flywheel gearing 12 hyst,4 PTO test mean 4mm flywheel gearing 8 hyst, PTO test mean 4mm flywheel gearing 16 hyst, PTO test mean 8mm flywheel gearing 8 hyst, gearing 8 hyst, gearing 16 hyst, gearing 12 hyst, gearing 8 hyst,4 gearing 16 hyst,4 gearing 12 hyst,4 PTO test mean 4mm flywheel gearing 8 hyst, PTO test mean 4mm flywheel gearing 16 hyst, PTO test mean 8mm flywheel gearing 8 hyst, hysterese force testbench Hystresis break min Hystresis break max Hystresis break mean 3, 2, 1,, -1, -2, -3, RPM testbench RPM min RPM max RPM mean
24
Fuld Skolerapport for Søhusskolen, i Odense kommune, for skoleår 2013/2014 for klassetrin(ene) 9. med reference Tilsvarende klassetrin i kommunen
Side 1 af 41 Side 2 af 41 Side 3 af 41 Side 4 af 41 Side 5 af 41 Side 6 af 41 Side 7 af 41 Side 8 af 41 Side 9 af 41 Side 10 af 41 Side 11 af 41 Side 12 af 41 Side 13 af 41 Side 14 af 41 Side 15 af 41
Fuld Skolerapport for Hunderupskolen, i Odense kommune, for skoleår 2013/2014 for klassetrin(ene) 7. med reference Tilsvarende klassetrin i kommunen
Side 1 af 43 Side 2 af 43 Side 3 af 43 Side 4 af 43 Side 5 af 43 Side 6 af 43 Side 7 af 43 Side 8 af 43 Side 9 af 43 Side 10 af 43 Side 11 af 43 Side 12 af 43 Side 13 af 43 Side 14 af 43 Side 15 af 43
SERVOMECH Linear Actuators
. SERVOMECH Linear actuators SERVOMECH mechanical linear actuators are motorised mechanical cylinders able to transform the rotary motion of a motor into the linear motion of a push rod. They are designed
International Journal of Innovative Research in Science, Engineering and Technology Vol. 2, Issue 5, May 2013
ISSN: 2319-8753 International Journal of Innovative Research in Science, Engineering and Technology Vol. 2, Issue 5, May 2013 of vibration are 0.14 rad/s and 0.42 rad/s respectively. The dynamic response
The illustrations in this manual may differ from the product you are using.
The illustrations in this manual may differ from the product you are using. 1 1 2 1 2 3 1 4 1 5 6 7 8 9 Youkei No.4 (105 mm 235 mm) (Envelope Y401 for Canon LBP/recommended) * You cannot use envelopes
OFFSHORE WIND Peter Robert
OFFSHORE WIND Peter Robert Business Development Manager Offshore Wind Damen Shipyards Group Phone: +31 (0)183 655177 Mobile: +31 (0)6 22856004 E-mail: peter.robert@damen.com ABOUT DAMEN FOUNDER: KOMMER
NIKON LENS CHART. Use this chart with the following Nikon based camera models: D7000 D7100/D7200 D810 D800 D600/D610 D4/D4s 3.140 5.
94 3.140 3.835 NODAL POINT.800 5.290 New 2016 revised version.700 NIKON LENS CHART 72 Use this chart with the following Nikon based camera models: D7000 D7100/D7200 D810 D800 D600/D610 D4/D4s 2.939 2,872
Machine Documentation BELKI Oil Separator type 301
Machine Documentation BELKI Oil Separator type 301 Content Technical dossier: Machine Specifications 3 Function: Oil separator Part 4 Suction part 5 Pump 7 Oil container 9 Machine prescription 9 Installations
Design methodology and numerical analysis of a cable ferry
Design methodology and numerical analysis of a cable ferry SNAME Annual Meeting; Nov 6-8, 2013, Bellevue, WA Paper #T35 Author name(s): Dean M. Steinke (M)1, Ryan S. Nicoll1 (V), Tony Thompson2 (M), Bruce
Machine Documentation
Machine Documentation BELKI Oil Separator type 211 0 Tabel of contents: Machine Documention...0 Tabel of contens...1 Description...2 Specifications...3 Diagram...4 Partlist...5 Pumpdrawing...6 Part list
5.290 3.835 NODAL POINT .700 3.540 .800 CANON LENS CHART. For cameras with 1:1 sensor Canon 1Ds Mk III Canon 5D 3.140 2.939 5.185
94 3.835 NODAL POINT 5.290 New 2016 revised version.700 135 3.140.800 CANON LENS CHART 72 For cameras with 1:1 sensor Canon 1Ds Mk III Canon 5D 2.939 2,872 1,750 3.540 14 2,835 1,220,360 5.185 TYPE 1 Canon
Hydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l
R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity
With an excellent weight-to-power ratio of 37 kg/hp, the C-L model is ideal for general field work, as well as for PTO and transport applications.
Specially designed for farming applications with state-of-the-art technical solutions, the new Perkins engines meet the Tier 3 emission standards, while providing high power and torque levels with low
NIKON LENS CHART. Use this chart with the following Nikon based camera models: D300s D2x D40/D40x/D60 D100 D70 / D70s Fuji S2 Pro 3.140 5.
94 New 2016 revised version 3.140 3.835 NODAL POINT.800 5.290.700 NIKON LENS CHART 72 Use this chart with the following Nikon based camera models: D300s D2x D40/D40x/D60 D100 D70 / D70s Fuji S2 Pro 2.939
B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN
No. of Printed Pages : 7 BAS-01.0 B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) CV CA CV C:) O Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN Time : 3 hours Maximum Marks : 70 Note : (1)
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling Due to the many different configurations of cabed and non-cabed tractors this article
TECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
M & S Sikkerheds - og Overtryksventiler/ M & S Safety - and Relief Valves
M & S Sikkerheds - og Overtryksventiler/ M & S Safety - and Relief Valves - Side 1. Issue AB:06-2012 255 HyCom Fjedersikkerhedsventil / HyCom-Safety Valve Spring Loaded - Manuel / Manual - For gasarter,
F1 Fuel Tank Surging; Model Validation
F1 Fuel Tank Surging; Model Validation Luca Bottazzi and Giorgio Rossetti Ferrari F1 team, Maranello, Italy SYNOPSIS A Formula One (F1) car can carry more than 80 kg of fuel in its tank. This has a big
GB INTRODUCTION manual:
GS - GS/L S2/S4 4 5 GB INTRODUCTION manual: Manufacturing Firm; The person responsible for the use of the fork truck must make sure that all of the safety rules in force in INSTRUCTIONS FOR USE 1) Do not
ARCHITECTURAL. FritsJurgens Pivot Door System Product Range Brochure
ARCHITECTURAL FritsJurgens Pivot Door System Product Range Brochure About Bellevue and FritJurgens -90 0 90 For over 30 years, the name Bellevue Architectural (formerly Bellevue Imports) has always been
CX (T3), great performance for unlimited versatility
CX90-100-110 (T3) The CX range is equipped with the new TIER-3 compliant Perkins 1104D series turbo engines. With powers of up to 102 hp, the new engines provide exceptional power and torque levels. The
MSSM. Nyborg, August 28 st 2014. Bengt Sangberg Marine Chief Executive. - Copyright Bureau Veritas
MSSM Nyborg, August 28 st 2014 Bengt Sangberg Marine Chief Executive 2 Composite materials are a mix several material: Reinforcement Matrix matrix (resin) reinforcement (fibres) Eventually other materials
A Brief Introduction and Discussion of R&D
: A Brief Introduction and Discussion of R&D, Denmark We have developed the world s only offshore-proven, grid-connected wind and wave power plant. FPP s P37 Test Platform Disconnectable Video 3 Smoothed
Kubota Tractor B50 Cab
Tractor B50 Cab Engine B2650HSDC 2520R 25 B3350HSDC 3320 3040 Engine gross power HP 26 24.2 27 33 32.8 40 36.2 PTO power HP 19.5 18.0 19.9 27 25 32 29.0 No. of cylinders 3 3 3 4 3 4 3 Mahindra 3616 Engine
Department of Wind. Energy E Report 2014. Experimental and Theoretical Analysis of a Combined Floating Wave and Wind Energy Conversion Platform
Department of Wind Energy E Report 2014 Experimental and Theoretical Analysis of a Combined Floating Wave and Wind Energy Conversion Platform Anders Yde (DTU Wind Energy) Mads M. Pedersen (DTU Wind Energy)
127 PCS. Art. NO. 712701 Art. NO. 712702 Art. NO. 712703. www.sonic-equipment.com
7 PCS Art. NO. 770 Art. NO. 770 Art. NO. 770 8 drawers with ball bearing slides drawers completely filled with 7-pcs tools drawer blocking system, as protection against tipping over abs topblade can holder
Thermostatic bar showers. Troubleshooting and maintenance
Thermostatic bar showers Troubleshooting and maintenance General Fault Diagnosis Outlet too cold Outlet too hot - Hot water supply must be 10ºC higher than desired mixed outlet for the mixer to operate
G1RT-CT-2001-05071 D. EXAMPLES F. GUTIÉRREZ-SOLANA S. CICERO J.A. ALVAREZ R. LACALLE W P 6: TRAINING & EDUCATION
D. EXAMPLES 316 WORKED EXAMPLE I Infinite Plate under fatigue Introduction and Objectives Data Analysis 317 INTRODUCTION AND OBJECTIVES One structural component of big dimensions is subjected to variable
Valtra A Series Compact and Orchard models A53 / A63 / A73
Valtra A Series Compact and Orchard models A53 / A63 / A73 Full range of tractors in all size classes Individually Yours 2 Valtra is the one and only tractor manufacturer in the Nordic region. Our roots
Loads and response from steep and breaking waves on monopiles
Downloaded from orbit.dtu.dk on: Jan 12, 2016 Loads and response from steep and breaking waves on monopiles Bredmose, Henrik; Schløer, Signe; Sahlberg-Nielsen, Lasse; Slabiak, Peter ; Larsen, Torben J.;
Maintenance manual DG-1000S. 0.1 Manual amendments No. Page Description Date 1 0.5, 0.6, 4.14-4.16 diagrams 7, 11, 12
Maintenance manual DG-1000S 0 General 0.1 Manual amendments No. Page Description Date 1 0.5, 0.6, 4.14-4.16 diagrams 7, 11, 12 Manual revision TN413/2 September 2003 2 0.6, diagrams 1 and 11 Manual revision
ZF W325 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 507 680 2600 Continuous 430 577 2600 ** Must not be exceeded Description Robust design
ŠKODA Rapid Petrol engines
ŠKODA Rapid Petrol engines Technical specifications 1.2 MPI/55 kw 1.2 TSI/63 kw 1.2 TSI/77 kw 1.6 MPI/77 kw 1.6 MPI/77 kw (A) 1.4 TSI/90 kw (A) Engine Engine type turbocharged petrol petrol engine, in-line,
UNIT 13 DESIGN OF GUIDEWAYS AND SPINDLE
UNIT 13 DESIGN OF GUIDEWAYS AND SPINDLE Design of Guideways and Spindle Structure 13.1 Introduction Ojectives 13. Functions of Guideways 13.3 Types of Guideways 13.3.1 Guideways with Sliding Friction 13.3.
BNAM 2008 BERGEN BYBANE NOISE REDUCTION BY TRACK DESIGN. Reykjavik, august 2008. Arild Brekke, Brekke & Strand akustikk as, Norway
BNAM 08 BERGEN BYBANE NOISE REDUCTION BY TRACK DESIGN Dr.ing Arild Brekke Brekke & Strand akustikk as Box 1024 Skøyen 0218 Oslo Email: arild.brekke@bs-akustikk.no Introduction BNAM 08 A city line now is
Quality Operators for Garage Doors and Entrance Gates. Garage door operator LIFTRONIC for up-and-over doors and sectional doors
MORE CONVENIENCE FOR YOUR HOME Quality Operators for Garage Doors and Entrance Gates Garage door operator LIFTRONIC for up-and-over doors and sectional doors Entrance gate operator PORTRONIC for hinged
University of Birmingham Team Prototype Hydrogen Locomotive. 30/06/2012 Stephen Kent, Jon Tutcher, Daniel Reed
University of Birmingham Team Prototype Hydrogen Locomotive 30/06/2012 Stephen Kent, Jon Tutcher, Daniel Reed The Challenge Institution of Mechanical Engineers run a successful annual event formula student
Maskinmesteren. Maskinmestrenes Forening maj juni 2015 nr. 56 Maskinmesteren. management and technology. Nyt. servicefartøj øger oppetid for havmøller
Media Information 2016 Maskinmestrenes Forening januar 2015 nr. 1 Maskinmestrenes Forening februar 2015 nr. 2 Maskinmestrenes Forening maj juni 2015 nr. 56 Besparelser smager sødt Kent Egsgaard er fabrikschef
ZF W320 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 425 570 2400 Continuous 357 479 2400 ** Must not be exceeded Description Robust design
UPGRADED KIA CEE D TECHNICAL SPECIFICATIONS (EUROPE)
UPGRADED KIA CEE D TECHNICAL SPECIFICATIONS (EUROPE) Body and chassis Three- or five-door, five-seater C-segment hatchback, with all-steel unitary construction bodyshell. Choice of diesel and gasoline
Series 7500 Torque Sensor
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement
OIO Dekstop applikation
OIO Dekstop applikation 25-09-2009. Version 1.0 Sammendrag af ideer og dialog på møde d. 24-09-2009 mellem ITST, Trifork og Designit Under udarbejdelse Diagram Test applikation Grupper Digitaliser.dk Applikation
Maintenance and Disposition. Ocean and Marine Technology Functional Files. Function Number 1800
Maintenance and Disposition Ocean and Marine Technology Functional Files Function Number 1800 Function number 1800 deal with program related to ocean and marine technology promotion, evaluation, and information.
x60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3)
x60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3) ENGINE perkins TIER 3 1104D-44TA 1104D-44TA 1104D-44TA 1104D-44TA ELECTRONIC INJECTION MAX. ENGINE POWER (ISO RATING) HP/KW 92,5 / 68 102 / 75 110 / 81 112
Direct Mail K305 Inserting System
A cost effective modular direct mail inserting solution for most mail applications. Active marketing entails communication and getting your message across to your target group. The direct mailing market
Safe Offloading from Floating LNG Platforms (SAFE OFFLOAD) R. V. Ahilan Noble Denton Europe
Safe Offloading from Floating LNG Platforms (SAFE OFFLOAD) R. V. Ahilan Noble Denton Europe Overview Background Project Objective Partners Work Scope Key Developments Deliverables Schedule Additional Participation
ALLISON TRANSMISSION INDEX
ALLISON TRANSMISSION INDEX 1000 (GM 3600 Cab-Chassis) N/A 64R 1000, EVS, RDS, SPS, MHS, BUS, TRV N/A 64R&64L 2000, EVS, RDS, SPS, MHS, BUS, TRV N/A 64R&64L 2100EVS N/A 64R&64L 2100MH N/A 64R&64L 2100RDS
QP-2040 CNC VERTICAL MACHINING CENTER
Page 1 of 11 QP-2040 CNC VERTICAL MACHINING CENTER Page 2 of 11 CHEVALIER s QP series large capacity VMCs are designed for high precision and high productivity machining of large work pieces for aerospace,
M E TA L C O N TA I N E R S 90
90 INDUSTRIAL CONTAINERS COLOUR VARIANTS For high capacity can be stacked up to 4 pieces (1+3). Made of moulded reinforced steel or electro-welded mesh 40 x 40 x 4mm. with wire welding in all the points
Investigation of sound insulation for a Supply Air Window field measurements and occupant response
Investigation of sound insulation for a Supply Air Window field measurements and occupant response Lars Sommer SØNDERGAARD 1 ; Søren Vase LEGARTH 2 1 DELTA, Denmark ABSTRACT The Danish Environmental Protection
Retningslinjer for implementering af kvalitet i mobilitetsledelse i små og mellemstore byer
DS-information DS/CWA 16030 1. udgave 2009-10-30 Retningslinjer for implementering af kvalitet i mobilitetsledelse i små og mellemstore byer Code of practice for implementing quality in mobility management
VICTORIA D. 103' (31.60m) CNB
VICTORIA D 103' (31.60m) CNB LOA: Beam: Min Draft: Max Draft: Speed: 103' 9" (31.60m) 24' 7" (7.49m) Min 12' 6" (3.80m) Cruising 10 knots Max 12 knots Year: Builder: Type: Price: Location: Mfg 1994 Model
Numerical modelling of shear connection between concrete slab and sheeting deck
7th fib International PhD Symposium in Civil Engineering 2008 September 10-13, Universität Stuttgart, Germany Numerical modelling of shear connection between concrete slab and sheeting deck Noémi Seres
Direct Mail 2009 DIRECT MAIL INSERTING SYSTEMS. The document finishing company
Direct Mail 2009 DIRECT MAIL INSERTING SYSTEMS The document finishing company The Plockmatic 4000 System A cost effective modular direct mail inserting solution for most mail applications. Active marketing
Data-driven Vessel Performance Monitoring
Data-driven Vessel Performance Monitoring ErhvervsPhD projekt af Benjamin Pjedsted Pedersen FORCE Technology / DTU Poul Andersen Maritime Engineering, Department of Mechanical Engineering, DTU Jan Larsen
Dane s Marine Clear Fork Marina 7471 St Rt 97 Lexington, OH 44904
Dane s Marine Clear Fork Marina 7471 St Rt 97 Lexington, OH 44904 SPECIAL PONTOON PACKAGE PRICING! 2014 Rate Sheet Dane s Marine has been proud to service Clear Fork Reservoir and area boaters for over
Contents. VDI system. BMT system. 1. Driven Coupling Type DIN 1809 DIN 5480 DIN 5482 HAAS SPUR MT TOEM (BARUFFALDI) 1809 5480 MORI SEIKI
ISO 9001:2008 Contents 1. Driven Coupling Type VDI system DIN 1809 DIN 5480 DIN 5482 SPUR MT TOEM (BARUFFALDI) HAAS BMT system 1809 5480 MORI SEIKI 2. Turret Type Radial Turret Axial Turret 3. Driven Tool
TYPE CERTIFICATE DATA SHEET Nº EA-2011T03 Type Certificate Holder: COSTRUZIONI AERONAUTICHE TECNAM S.r.l. Via Tasso, 478 80127 - Napoli Italy
TYPE CERTIFICATE DATA SHEET Nº EA-2011T03 Type Certificate Holder: COSTRUZIONI AERONAUTICHE TECNAM S.r.l. Via Tasso, 478 80127 - Napoli Italy EA-2011T03-02 Sheet 01 TECNAM P2006T 04 May 2012 This data
Aarhus Universitet Faculty of Agricultural Sciences Engineering Centre Bygholm
Aarhus Universitet Faculty of Agricultural Sciences Engineering Centre Bygholm REPORT NO. 211-1 ON REQUESTED TEST Spreadability of different YARA products REQUESTED BY: YARA Danmark Kastelsvej DK-7 Fredericia
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
Engine. 204-1890 Strobe light, 110V 204-1891 Strobe light, 220V 204-458 Replacement bulb. 204-1057 Compression gauge. 204-166 Dial indicator
The Strobe light checks the unit for: Balance of operating machinery RPM of motors, engine pulleys, fans, etc. Observe belt slippage Strobe light will stop action at speeds from 200 to 6000 RPM 204-1890
Kontrol- og indikeringsudstyr med options som givet i bilag 4 Control and fndicating Equipment with options as given rn annex 4
È DANAK Reg nr.7004 r Ceftifikat nr, CertifÌcate no. 232.L406 Siemens A/S Borupvang 3 2750 Ballerup har på baggrund af vurderede typeegenskaber baseret på typeprøvningsrapport(er) for overensstemmelse
Norsk Olje og gass Selbusjøen 21.5.2014. www.eninorge.com
Norsk Olje og gass Selbusjøen 21.5.2014 www.eninorge.com Innholdet i presentasjonen Goliat værdata Goliat innretningen valg av løsninger Risikostyring i arktiske strøk Lysarkene er hovedsakelig skrevet
2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
UNITOR ULTRASONIC cleaning
UNITOR ULTRASONIC cleaning ULTRASONIC machines Unitor Ultrasonic cleaning machines are specially designed for use in the ship s engine room to remove even the most stubborn dirt. Compared with traditional
Maskinmesteren. Maskinmesteren. management and technology. Stor fjernvarmeudvidelse hos SK Forsyning
26-årige Peter Christensen er juniormaskinmester på Triple-E-skibet Mary Maersk. De næste to år skal han blive fortrolig med skibets mangfoldighed af teknologier. Media Information 2015 Maskinmestrenes
Trends in the Development of Container Vessels
Trends in the Development of Container Vessels Presentation at NTU Athens 2005-05-25 Contents Technological Development of Container Vessels The current size limits and future prospects The 9200TEU Post-Panamax
5SDD 92Z0401. Housingless Welding Diode. I FAVm = 9 244 A I FSM = 60 000 A V TO = 0.780 V Applications r T = 0.031 m. Types.
SDD 92Z41 Housingless Welding Diode Properties SDD 92Z41 Key Parameters High forward current capability V RRM = 4 V Low forward and reverse recovery losses I FAVm = 9 244 A I FSM = 6 A V TO =.78 V Applications
19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
Maersk Resilient. Maximised drilling efficiency and uptime. Optimised for concurrent activities
Maersk Resilient Maximised drilling efficiency and uptime Optimised for concurrent activities Maersk Resilient TYPE MSC CJ50-X100 MC, 350 ft jack-up drilling rig BUILT Keppel FELS, 2008 CLASS American
Product Management - Glass ALEXA PRODUCT PRESENTATION. Region SAARC Nitin Lloyd, Product Management. Chennai, FY 2013 / 2014
Product Management - Glass ALEXA PRODUCT PRESENTATION Region SAARC Nitin Lloyd, Product Management Chennai, FY 2013 / 2014 PRODUCT MANAGEMENT - GLASS Alexa Partitioning Systems DESIGN: Slim Profile system
1 Air-to-Air AfterCooling. 2 Engine Only. Capacity will vary with radiator size and use. of cab heater.
Diesel Truck Engine 3126B 175-330 hp 420-860 @ 1440 rpm Peak CATERPILLAR ENGINE SPECIFICATIONS 6-Cylinder, 4-Stroke-Cycle Diesel Bore in (mm)... 4.33 (110) Stroke in (mm)... 5.0 (127) Displacement cu in
IMPORTANT INSTALLATION GUIDE VALENCIA SQUARE CORNER SHOWER READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION
INSTALLATION GUIDE VALENCIA SQUARE CORNER SHOWER SEALANT REQUIRED TO COMPLETE THIS INSTALLATION: (Not supplied) Sika Sikasil NG (Arctic White) To seal the WHITE shower door and returns to the shower tray.
DA20-A1/DA20-100 List of Applicable Publications
Doc. No. Description Updates Status DA200 (This document) Rev 75 - Nov-20-13 DA20-33-01 Night VFR, Installation Cockpit Lighting Removed DA20-33-03 Cockpit Night Lighting System Installation Rev 0 - May-27-13
INSULATION SYSTEMS FOR CODUCTORS
INSULATION SYSTEMS FOR CODUCTORS For wire, flat wire and rope Vat no.: 01251430193 Fiscal code: DGH CMN54D11A570F Page. 1 Mechanical factory Mechanical constructions Installation of plants Services for
How To Write An International Safety Standard
Dansk standard DS/ISO 26262-6 1. udgave 2012-01-11 Motorkøretøjer Funktionssikkerhed Del 6: Produktudvikling på softwareniveau Road vehicles Functional safety Part 6: Product development at the software
Let your machine decide!
Let your machine decide! Life would be driveless without us Presenter: Bart Smits, Date: 09/07/2015 So think new! 2 2015-09-15 IE Event Presentation Final 2.ppt V1.0 09/07/2015 Presenter Bart Smits Sep
BSF and BCC beam connections
No. 2512 Norwegian member of European Organisation for Technical Approvals, EOTA, and European Union of Agrément, UEAtc Issued: 11.09.2007 Revised: Valid until: 11.09.2012 Page: 1 of 5 BSF and BCC beam
GAS FLAWLESS - FORM C
DESCRIPTION OF THE VESSEL 1. GENERAL 1.1 Builder and Yard HIGAKI S/Y Hull No. H/N 595 1.2 Year built 2007 1.3 Flag MALTA 1.4 Signal Letters and Normal Station Watched 9HVB8 1.5 Classification Lloyds 1.6
Product catalogue, pipe and sewer cleaning systems
Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.
5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model
Shelf Wagon. Product number DOS1821 Shelf Wagon
Shelf Wagon DOS1821 Shelf Wagon External dimensions... 1260 x 808 x 1675mm Internal dimensions... 1200 x 800 x 1367mm Unit Weight... 308 lbs / 140 kg Max Shelf load... 330 lbs / 150 kg Max Unit load...
Godkjent avdelingsleder Læremidler som skal benyttes, Revisjons dato LTT filer: LTT rev. 2014-mai. Tema Bok referanse Ansvarlig lærer
Årsplan for faget: Modul 11 FASS Ref: Grunnleggende mål i læreplan for programfagene Godkjent avdelingsleder Læremidler som skal benyttes, Revisjons dato LTT filer: LTT rev. 2014-mai LTT M11 B1 ejamf M11.01.pdf,
A Cost- Effective Computational Tool for Offshore Floater Design
Introduction A Cost- Effective Computational Tool for Offshore Floater Design Jang Whan Kim, Hyunchul Jang & Jim O Sullivan Technip Offshore floating platforms are complex engineering systems with numerous
SSG PRODUCTS FOR SHIPS AND OFFSHORE
6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these
Skedsmo videregående skole NO.147.0002 Rev. dato: 25.09.2014
Årsplan for faget: M12 HASS Ref: Grunnleggende mål i læreplan for programfagene Godkjent avdelingsleder Læremidler som skal benyttes, Revisjons dato LTT filer: LTT rev. 2014 mai Tillegg: LTT 12.3 September
SD3-60 AIRCRAFT MAINTENANCE MANUAL AND MOORING - GENERAL
AMM 10-00-00 1.0.0.0PARKING AND MOORING - GENERAL 1. General Information on parking and mooring the aircraft in normal conditions is given in the following sections: - Parking (Refer to 10-11-00, pb201.)
EXCAVATION AND PILING NEAR SEWERS, STORMWATER DRAINS AND WATER MAINS
NMP 1.4 EXCAVATION AND PILING NEAR SEWERS, STORMWATER DRAINS AND WATER MAINS Index Purpose... 2 Application... 2 Referral Agency... 2 Associated Requirements... 2 Referenced Standards...2 Definitions...
MIDSHIP INTERCEPTOR AND AFT STABILIZER
PLANING POWERBOATS WITH MIDSHIP INTERCEPTOR AND AFT STABILIZER The purpose of this presentation is to show an alternative for a more efficient powerboat than the commonly used V-bottom boat. The result
SERVICE BULLETIN No.1103
SERVICE BULLETIN No.1103 Circulate to listed addressees COACH MODEL BULLETIN TYPE MANUAL & SECTION PARTS BOOK REVISION : T 2100 and C2000 Series : Service Information : Maintenance Manual: Chapter 3 Drive
TECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 5 Model No. Description 8390D Cordless Percussion Driver Drill 13mm CONCEPT AND MAIN APPLICATIONS Model 8390D has been developed by adding percussion mechanism to Model 6390D.
WOLFFKRAN. 1 Schedule drawing. 1.1 Schedule drawing, WOLFF 6023.6clear. max. hook height above ground. Data WOLFF 6023.6clear
1 Schedule drawing 1.1 Schedule drawing, WOLFF 6023.6clear [X] max. hook height above ground Data WOLFF 6023.6clear Item Crane type Design Type of setup Basis of calculation Payload torque Hoist winch
Motorhome Entrance Door CaraD-RF With Aluminium Door Panel Art. 1401
CaraD-RF 1/10 63.1 Content.DOC Motorhome Entrance Door CaraD-RF With Aluminium Door Panel Art. 1401 Ordering Details Technical Drawing without Fly Net Door Technical Drawing with Fly Net Door Technical
BU LE HAVRE - Naval & Harbour expertise
BU LE HAVRE - Naval & Harbour expertise March 2014 General presentation BU LE HAVRE STAFF & CAPACITY 5 project engineers 10 calculation engineers 13 technical draftmans SOFTWARE Naval architecture o Hydrodynamics:
VOLUME of Rectangular Prisms Volume is the measure of occupied by a solid region.
Math 6 NOTES 7.5 Name VOLUME of Rectangular Prisms Volume is the measure of occupied by a solid region. **The formula for the volume of a rectangular prism is:** l = length w = width h = height Study Tip:
VOLUME 5 DAMAGE STABILITY
VOLUME 5 DAMAGE STABILITY Contents 5.1 Damage stability...2 5.1.1 General remarks...2 5.1.2 Damage stability program...2 5.1.3 Description of program and data sheets...3 5.1.4 Description of data sheets...3
HOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
Power Tools for Professionals
Power Tools for Professionals 35 th ANNIVERSARY SPECIAL Offer v alid un 31.12. 2 til 014 2014 1979 1984 1986 1988 1999 2003 S L O O T R E W O P F 35 YEARS O 2014 THE 35 YEAR ANNIVERSARY MODELS Limited