NATIONAL STOCK EXCHANGE OF INDIA LIMITED DEPARTMENT : CURRENCY DERIVATIVES. Download Ref No : NSE/CD/30696 Date : September 07, 2015

Transcription

1 NATIONAL STOCK EXCHANGE OF INDIA LIMITED DEPARTMENT : CURRENCY DERIVATIVES Download Ref No : NSE/CD/30696 Date : September 07, 2015 Circular Ref. No : 030/2015 All Members, Mock trading from BCP/DR site on Saturday, September 12, 2015 Exchange shall be conducting a mock trading session on Saturday, September 12, 2015 from Primary and BCP site. The mock will be followed by a Re-Login session from Primary site in order to avoid log-in problems on Monday, September 14, The schedule of the mock trading is as follows: Mock trading from Primary Site (No change in TAP settings. Retain the settings of live market as of Friday, September 11, 2015): Saturday, September 12, 2015 Normal Market open time Normal Market close time Time 10:00 hrs. 11:00 hrs. Mock trading from BCP Site (Kindly change TAP settings as per Annexure-2): Saturday, September 12, 2015 Normal Market open time Normal Market close time Position Limit/Collateral value Set up cut off time Trade modification end time Time 14:15 hrs. 15:30 hrs. 15:40 hrs. 15:40 hrs. Re-Log in Session (Kindly change TAP settings as per Annexure- 3): Saturday, September 12, 2015 Live Re-login start time Live Re-login close time Time 17:00 hrs. 17:30 hrs. Members are required to perform the following: All the outstanding orders shall be purged before the start of trading from BCP site. Members using NNF software should clear the outstanding orders of session 1 in their systems before trading from BCP site. Members should note that for TBT feed (both Multicast & TCP), sequence number will start from 1 once trading starts from BCP site. Members using TBT feed should clear session 1 data and start fresh session in their systems before orders and trades feed start from BCP site. Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai Page 1 of 11

2 Select BCP radio button in TAP configuration parameters screen & save the same before login in BCP environment (Details as per Annexure-2). Login to BCP site shall be made available half an hour before market hours. For login to live environment in re-login session and from Monday, September 14, 2015 onwards, please select the Primary radio button in TAP configuration parameters screen & save the same. (Details as per Annexure-3) For other important instructions members may refer to the following: Annexure 1: Operational instructions for BCP mock trading session Annexure 2: TAP configuration for BCP login for mock trading session Annexure 3: TAP configuration for login to LIVE environment during Re-login session For and on behalf of National Stock Exchange of India Limited Khushal Shah Chief Manager Toll Free No Fax No id Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai Page 2 of 11

3 Annexure 1 Operational instructions for BCP mock trading session: The Connect2NSE and Extranet facility on VSAT/Lease-line will not be available from 10 pm on Friday, September 11, 2015 to 6:30 PM on Saturday, September 12, However, Extranet facility on internet will be available. Co-location facility and Tick by Tick (TBT) feed shall be available. TBT feed will be available on the same Production IP's. There will not be any change in the IP's for accessing TBT feed for the mock. Trades resulting from this session shall not attract any obligation in terms of funds and / or securities pay-in and/or pay-out. Kindly do not transfer any data files for this session. Kindly participate actively in the BCP mock trading session from all trading software and re-login into live environment to check the connectivity and to avoid login problems on Monday, September 14, Kindly refer to the website of NSE at for any information which may be updated by the Exchange on the BCP mock trading session. In case of any queries please call on Toll Free no: Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai Page 3 of 11

4 Annexure 2 TAP configuration for BCP login to mock trading setup on Saturday, September 12, 2015 a. INTEGRATED WINDOWS TAP CONFIGURATION 1) Start TCMS. 2) Under the menu bar, select the TAB named TAP. 3) Go to TAP Configuration and select the market segment you want to configure. 4) In the configuration dialog, selecting BCP Radio Button, your screen will look like this: 5) On Save click, under BCP Prompt below is just a confirmation asked when respective TAP is running. Select Yes Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai Page 4 of 11

5 6) Confirmation to save configuration for BCP environment. Select Yes 7) On successful modification, TCMS user will get a response Parameter(s) updated successfully in Tap configuration file for that particular market as shown in the fig. below. Thus indicating that the changes made are reflected correctly. Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai Page 5 of 11

6 b. INTEGRATED LINUX TAP CONFIGURATION 1) Start the TCMS. 2) Select option TAP configuration Menu. 3) Then select particular market type, in which you want to make the changes (e.g CD). 4) To connect to BCP environment please select the option Switch to BCP Configuration Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai Page 6 of 11

7 5) Then select Save or Save & Exit. Members are requested to verify following Route entries on their TAP server to ensure successful login at BCP site. Network Address Netmask Gateway Address <gateway> Gateway address IP must be - TAP IP minus 1, which means, the last digit of the IP minus 1. Example:- If TAP Server IP is then Gateway IP should be Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai Page 7 of 11

8 Annexure 3 TAP configuration for login to LIVE environment during Re-login session and on Monday, September 14, 2015 a. INTEGRATED WINDOWS TAP CONFIGURATION 1) Start TCMS. 2) Under the menu bar, select the TAB named TAP. 3) Go to TAP Configuration and select the market segment you want to configure. 4) In the configuration dialog, selecting Primary Radio Button, your screen will look like this: Primary: 5) On Save click, Prompt below is just a confirmation asked when respective TAP is running. Select Yes Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai Page 8 of 11

9 6) On successful modification, TCMS user will get a response Parameter(s) updated successfully in Tap configuration file for that particular market as shown in the fig. below. Thus indicating that the changes made are reflected correctly. Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai Page 9 of 11

10 b. INTEGRATED LINUX TAP CONFIGURATION 1) Start the TCMS. 2) Select option TAP configuration Menu. 3) Then select particular market type, in which you want to make the changes. 4) To connect to Primary environment please select the option Switch to Primary Configuration Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai Page 10 of 11

11 5) Then select Save or Save & Exit. Regd. Office : Exchange Plaza, Bandra Kurla Complex, Bandra (E), Mumbai Page 11 of 11