210G/210G LC kg (47,494 50,463 lb.) Operating Weight

Transcription

1 210G/210G LC kg (47,494 50,463 b.) Operating Weight

2 Cover a the anges. 2 3 Heavier and stronger than their popuar predecessors, the 210G and 210G LC are aso more productive. So, whether you use them to excavate footings, oad trucks, set stone, pace pipe, or whatever, you get more done per gaon of fue. What s more, they re oaded with customer-inspired refinements such as more comfortabe and spacious cabs. Enhanced LCD monitors with simpified navigation that ets an operator easiy dia-in a weath of machine info and functionaity. Exceptiona power, smoothness, and operating ease the highy 210G and 210G LC cover a the anges so you can, too.

3 210G 210G LC Net rated power 119 kw (159 hp) 119 kw (159 hp) Operating weight kg (47,494 b.) kg (50,463 b.) Maximum digging depth 6.68 m (21 ft. 11 in.) 6.68 m (21 ft. 11 in.) Arm digging force 114 kn (25,543 b.) 114 kn (25,543 b.) Bucket digging force 156 kn (35,138 b.) 156 kn (35,138 b.) Both the standard-undercarriage 210G and ong-undercarriage 210G LC pack penty of abiity into highy versatie and easy-totransport packages. Highy efficient hydrauicay driven fans run ony as fast as needed, reducing noise, fue consumption, and operating costs. Reversing option automaticay back-bows cooer cores to keep them cean. With John Deere WorkSight, JDLink monitoring provides reatime machine utiization and heath data, pus ocation information. Machine-heath prognostics proactivey suggest maintenance to correct probems eary before they turn into costy downtime. And remote diagnostics and programming enabe your deaer to read diagnostic codes, and record performance data without a trip to the jobsite. It s the most comprehensive, easy-to-use suite of technoogy avaiabe for increasing uptime and productivity whie owering operating costs. And it s ony avaiabe from John Deere.

4 Unearth more work. With more arm digging force, bucket breakout force, and ift capacity, 210G and 210G LC are impressive performers. But even with a of their extra musce, their no-compromise Powerwise III hydrauic management system yieds the fue efficiency, pinpoint metering, and smooth-as-sik ow-effort contro that have become trademarks of our excavators. And if you re ooking to put even more work within reach, add any of the many options and attachments that increase machine capabiity and expand your profit potentia. 4 5 Additiona hydrauic capabiity a necessity? Two factory-instaed high-pressure, high-fow auxiiary packages enabe you to meet the need. Changing hydrauic fow is pushbutton easy right from the seat. Accommodates a wide assortment of attachment needs. Choose from a variety of track widths, arm engths, buckets, and other options. Powerwise III perfecty baances engine performance and hydrauic fow for predictabe operation. Three productivity modes aow you to choose the digging stye that fits the job. High productivity deivers more power and faster hydrauic response to move more materia. Power maximizes fue economy whie baancing horsepower and speed for norma operation. Economy heps conserve fue as it reduces top speed.

5 1. For work that requires extra finesse, shortthrow ow-effort contros, unmatched metering, and smooth muti-function operation give you the precision you need. 2. Generous hydrauic fow and ampe swing torque hep speed cyces, so you can keep trucks roing and excavate efficienty. 3. When the digging gets tough, simpy press the power-boost button on the right-hand contro and musce through

6 Get unsurpassed operating ease. 6 7 Now it s easier than ever for your operators to be even more producitve. The refined monitor empoys a rotary contro that makes it quick and easy to tap into an abundance of performance and convenience functions and features. Operators wi aso appreciate the comfortabe fabric-covered high-back seat and increased egroom in the spacious, we-appointed cab. As aways, unsurpassed a-round visibiity, ow-effort joysticks, a highy efficient HVAC system, and numerous other amenities provide everything your operators need to do their best work.

7 1 With arge sef-ceaning steps and wide entryways, getting in and out of an excavator has never been easier. Spacious cab is comfortabe and noticeaby quiet. Siicone-fied mounts effectivey isoate operators from noise and vibration. We ve got your back with a scupted mechanica-suspension high-back seat. Seat has 318 mm (12½ in.) of trave, siding together or independent of the joystick consoe. So it won t cramp an operator s stye. For even more support and comfort, opt for the air-suspension heated seat. Ergonomicay correct short-throw piot evers provide smooth, predictabe fingertip contro with ess movement or effort. Push buttons in the right ever aow fingertip contro of auxiiary hydrauic fow for operating attachments. No shortage of storage in here. There s a pace for a cooer, cup hoders, and even a hot/cod box that keeps beverages at just the right temperature. Avaiabe boom and cab ights iuminate the way when your workday extends beyond dayight hours (eft-side boom ight is standard) Muti-anguage LCD monitor and rotary dia provide intuitive access to a weath of information and functions. Just turn and tap to seect attachments, access operating info, check maintenance intervas, source diagnostic codes, adjust cab temperature, and tune the radio. Pus much more. 2. Wide expanse of front and side gass, narrow front cab posts, arge overhead gass, and numerous mirrors provide virtuay unobstructed a-around visibiity. If you need to see more, choose the optiona camera that dispays the action behind on the monitor Automatic, high-veocity bi-eve cimatecontro system with automotive-stye adjustabe ouvers heps keep the gass cear and the cab comfortabe.

8 Nothing runs ike a Deere, because nothing is buit ike one. 1. Reinforced D-channe side frames provide maximum cab and component protection. 8 9 Unike some excavators that scream for attention, the hydrauicay driven-on-demand fans in our G-Series run ony as fast as needed. For reduced noise and fue consumption. Their highy efficient cooing systems keep things running coo, even in high-trash environments and high atitudes. You aso continue to profit from traditiona durabiity-enhancing extras such as tungsten-carbide thermacoated arm surfaces, oi-impregnated bushings, and weded-boom bukheads. For maximum uptime and ong-term durabiity. When you know how they re buit, you run a Deere. 1

9 Reinforced resin thrust pates, grooved bushings, and therma-coated bucket joints increase arm and boom ube intervas to 500 hours. Oi-impregnated bushings enhance durabiity and extend grease intervas to 500 hours for the arm-and-boom joint and 100 hours for the bucket joint. Tungsten-carbide coating creates an extremey wear-resistant surface to protect the a-important bucket-to-arm joint. A John Deere excusive, three weded bukheads within the boom resist torsiona stress for unsurpassed durabiity. Booms, arms, and mainframes are so tough, they re warranted for three years or 10,000 hours. Thick-pate singe-sheet mainframe, boxsection track frames, and industry-excusive doube-sea swing bearing deiver rocksoid durabiity. Wet-seeve cyinder iners, mono-stee pistons, and arge-diameter connecting rods ensure ong-term engine durabiity. 2. With arge iders, roers, and strutted inks, the seaed and ubricated undercarriage deivers ong and reiabe performance. 3. Highy efficient, heavy-duty cooing system keeps things coo, even in tough environments or high atitudes. 4. TK-Series bucket teeth are engineered for maximum strength and impact absorption. Hammer-free instaation and remova simpifies changes, minimizes downtime

10 Uncover a the ways we keep costs down. Like a John Deere machines, the G-Series Excavators are oaded with features that make them hasse-free to service and ow-cost to maintain. Large, easy-to-open doors and easy-access service points make quick work of the daiy routine. Remote-mounted vertica oi and fue fiters and extended engine and hydrauic oi-change intervas minimize maintenance, too. Pus the Machine Information Center (MIC), state-of-the-art LCD coor monitor, and fuid-sampe ports hep you make timey decisions about machine upkeep and manage uptime and costs. Auto-ide automaticay reduces engine speed when hydrauics aren t in use. Auto-shutdown further preserves precious fue. Optiona reversing fan back-bows cooer cores to reduce debris buidup. It s a wecome addition that heps increase uptime. Large fue tanks and 500- and 5,000- hour engine and hydrauic oi-service intervas decrease downtime for routine maintenance. Centraized ubrication banks pace difficut-to-ube zerks within easy reach. They make greasing ess messy and time consuming, too. Machine Information Center captures and stores vita machine performance and utiization data to hep improve uptime. Fuid-eve sight gauges are convenienty ocated and can be checked at a gance. Convenient coor-coded ubrication and maintenance chart heps ensure that nothing gets overooked

11 1. Easy-to-read LCD monitor tracks schedued maintenance intervas and issues reminders. Shoud a probem arise, it provides diagnostic information to hep decrease downtime. 2. Convenient fuid-sampe and diagnostic test ports hep speed preventative maintenance and defeat downtime. 3. Vertica spin-on fue and engine oi fiters are positioned in the right rear compartment for simpified ground-eve servicing. 4. Fresh-air cab fiter is quicky serviced from outside the cab where it s more ikey to get done. 5. Easy-to-reach dipstick and nearby cooant reservoir make daiy checks and/or additions quick and easy. 6. Perforations in the side shieds act as a first fiter. Anything that passes through wi aso cear the 10-fin-per-inch cooer cores

12 210G / 210G LC Engine 210G / 210G LC Manufacturer and Mode John Deere PowerTech Pus 6.8 L John Deere PowerTech 6.8 L Non-Road Emission Standard EPA Tier 3/EU Stage IIIA EPA Tier 2/EU Stage II Net Rated Power (ISO 9249) 119 kw (159 hp) at 2,000 rpm 119 kw (159 hp) at 2,000 rpm Cyinders 6 6 Dispacement 6.8 L (415 cu. in.) 6.8 L (415 cu. in.) Off-Leve Capacity 70% (35 deg.) 70% (35 deg.) Aspiration Turbocharged, air-to-air charge-air cooer Turbocharged, air-to-air charge-air cooer Cooing Coo-on-demand hydrauic-driven, suction-type fan with remote-mounted drive Powertrain 2-speed prope with automatic shift Maximum Trave Speed Low 3.5 km/h (2.2 mph) High 5.5 km/h (3.4 mph) Drawbar Pu kg (45,620 b.) Hydrauics Open center, oad sensing Main Pumps 2 variabe-dispacement axia-piston pumps Maximum Rated Fow 212 L/m (56 gpm) x 2 Piot Pump One gear Maximum Rated Fow 30.0 L/m (7.9 gpm) Pressure Setting 3999 kpa (580 psi) System Operating Pressure Circuits Impement kpa (4,980 psi) Trave kpa (4,980 psi) Swing kpa (4,980 psi) Power Boost kpa (5,511 psi) Contros Piot evers, short stroke, ow-effort hydrauic piot contros with shutoff ever Cyinders Bore Rod Diameter Stroke Boom (2) 120 mm (4.72 in.) 85 mm (3.35 in.) 1260 mm (49.61 in.) Arm (1) 135 mm (5.31 in.) 95 mm (3.74 in.) 1475 mm (58.07 in.) Bucket (1) 115 mm (4.53 in.) 80 mm (3.15 in.) 1060 mm (41.73 in.) Eectrica Number of Batteries (12 vot) 2 Battery Capacity 1,400 CCA Aternator Rating 100 amp Work Lights 2 haogen (one mounted on boom, one on frame) Undercarriage 210G 210G LC Roers (each side) Carrier 2 2 Track 7 8 Shoes, Tripe Semi-Grousers (each side) Track Adjustment Hydrauic Hydrauic Guides Center Center Chain Seaed and ubricated Seaed and ubricated Ground Pressure Tripe Semi-Grouser Shoes 600 mm (24 in.) 45.0 kpa (6.53 psi) 47.9 kpa (6.95 psi) 700 mm (28 in.) 39.0 kpa (5.66 psi) 41.7 kpa (6.05 psi) 800 mm (32 in.) 34.0 kpa (4.93 psi) 36.9 kpa (5.35 psi) 12 13

13 Swing Mechanism 210G / 210G LC Speed 13.3 rpm Torque Nm (50,662 b.-ft.) Serviceabiity Refi Capacities Fue Tank 403 L (106.5 ga.) Cooing System 30.5 L (32.2 qt.) Engine Oi with Fiter 20.8 L (22 qt.) Hydrauic Tank 135 L (35.7 ga.) Hydrauic System 240 L (63.4 ga.) Gearbox Swing 6.2 L (6.6 qt.) Prope (each) 7.8 L (8.2 qt.) Pump Drive 1.0 L (1.1 qt.) Operating Weights 210G 210G LC With fu fue tank; 79-kg (175 b.) operator; 1065-mm (42 in.), 0.91-m 3 (1.19 cu. yd.), 886-kg (1,951 b.) genera-purpose bucket; and 4250-kg (9,370 b.) counterweight Operating Weight 2.91-m (9 ft. 7 in.) Arm and 800-mm kg (49,139 b.) kg (50,463 b.) (32 in.) Tripe Semi-Grouser Shoes 2.42-m (7 ft. 11 in.) Arm and 600-mm kg (47,494 b.) kg (48,817 b.) (24 in.) Tripe Semi-Grouser Shoes Component Weights Undercarriage with Tripe Semi- Grouser Shoes 600 mm (24 in.) 6752 kg (14,873 b.) 7353 kg (16,196 b.) 700 mm (28 in.) 7143 kg (15,733 b.) 7743 kg (17,055 b.) 800 mm (32 in.) 7437 kg (16,381 b.) 8038 kg (17,705 b.) One-Piece Boom (with arm cyinder) 1732 kg (3,815 b.) 1732 kg (3,815 b.) Arm with Bucket Cyinder and Linkage 2.22 m (7 ft. 3 in.) 928 kg (2,044 b.) 928 kg (2,044 b.) 2.91 m (9 ft. 7 in.) 990 kg (2,181 b.) 990 kg (2,181 b.) Boom-Lift Cyinders (2), Tota Weight 341 kg (751 b.) 341 kg (751 b.) Operating Dimensions 210G / 210G LC Arm Length 2.42 m (7 ft. 11 in.) 2.91m (9 ft.7 in.) Arm Digging Force SAE 133 kn (29,959 b.) 110 kn (24,773 b.) ISO 139 kn (31,355 b.) 114 kn (25,543 b.) E Bucket Digging Force SAE 142 kn (31,865 b.) 142 kn (31,865 b.) ISO 156 kn (35,138 b.) 156 kn (35,138 b.) A Maximum Reach 9.43 m (30 ft. 11 in.) 9.92 m (32 ft. 7 in.) A Maximum Reach at Ground Leve 9.25 m (30 ft. 4 in.) 9.75 m (32 ft. 0 in.) C D B Maximum Digging Depth 6.18 m (20 ft. 3 in.) 6.68 m (21 ft. 11 in.) B Maximum Digging Depth at 2.44-m 5.95 m (19 ft. 6 in.) 6.50 m (21 ft. 4 in.) (8 ft. 0 in.) Fat Bottom C Maximum Cutting Height 9.67 m (31 ft. 9 in.) m (32 ft. 11 in.) D Maximum Dumping Height 6.83 m (22 ft. 5 in.) 7.18 m (23 ft. 7 in.) GROUND LINE E Minimum Swing Radius 3.28 m (10 ft. 9 in.) 3.18 m (10 ft. 5 in.) A F Maximum Vertica Wa 5.30 m (17 ft. 5 in.) 5.99 m (19 ft. 8 in) A B B F CENTERLINE OF SWING

14 Machine Dimensions 210G 210G LC A Overa Length with Arm 2.42 m (7 ft. 11 in.) 9.75 m (32 ft. 0 in.) 9.75 m (32 ft. 0 in.) 2.91 m (9 ft. 7 in.) 9.53 m (31 ft. 3 in.) 9.53 m (31 ft. 3 in.) B Overa Height with Arm 2.42 m (7 ft. 11 in.) 3.18 m (10 ft. 5 in.) 3.18 m (10 ft. 5 in.) 2.91 m (9 ft. 7 in.) 3.01 m (9 ft. 11 in.) 3.01 m (9 ft. 11 in.) C Rear-End Length/Swing Radius 2.89 m (9 ft. 6 in.) 2.89 m (9 ft. 6 in.) D Distance Between Ider/Sprocket Centerine 3.35 m (11 ft. 0 in.) 3.67 m (12 ft. 0 in.) E Undercarriage Length 4.17 m (13 ft. 8 in.) 4.46 m (14 ft. 8 in.) F Counterweight Cearance 1030 mm (3 ft. 5 in.) 1030 mm (3 ft. 5 in.) G Upperstructure Width 2.71 m (8 ft. 11 in.) 2.71 m (8 ft. 11 in.) H Cab Height 2.95 m (9 ft. 8 in.) 2.95 m (9 ft. 8 in.) I Track Width with Tripe Semi-Grouser Shoes 600 mm (24 in.) / 700 mm (28 in.) / 800 mm (32 in.) 600 mm (24 in.) / 700 mm (28 in.) / 800 mm (32 in.) J Gauge Width 2.22 m (7 ft. 3 in.) 2.39 m (7 ft. 10 in.) K Ground Cearance 450 mm (17.72 in.) 450 mm (17.72 in.) L Overa Width with Tripe Semi-Grouser Shoes 600 mm (24 in.) 2.82 m (9 ft. 3 in.) 2.99 m (9 ft. 10 in.) 700 mm (28 in.) 2.92 m (9 ft. 7 in.) 3.09 m (10 ft. 2 in.) 800 mm (32 in.) 3.02 m (9 ft. 11 in.) 3.19 m (10 ft. 6 in.) G C H B F K J L I A D E 210G Lift Capacities Bodface type indicates hydrauicay imited capacity; ightface type indicates stabiity-imited capacities, in kg (b.). Ratings at bucket ift hook; machine equipped with 666-kg (1,468 b.) bucket, standard counterweight, and standard gauge; and situated on firm, eve, uniform supporting surface. Tota oad incudes weight of cabes, hook, etc. Figures do not exceed 87 percent of hydrauic capacities or 75 percent of weight needed to tip machine. A ift capacities are based on ISO (with power boost). Load Point Height 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) Horizonta Distance from Centerine of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side With 2.91-m (9 ft. 7 in.) arm and 700-mm (28 in.) tripe semi-grouser shoes 6.0 m (20 ft.) 4700 (10,300) 4450 (9,500) 4.5 m (15 ft.) 6150 (13,250) 6150 (13,250) 5250 (11,450) 4300 (9,250) 4500 (9,600) 2850 (6,150) 3.0 m (10 ft.) 8050 (17,350) 6400 (13,800) 6150 (13,350) 4050 (8,750) 4400 (9,450) 2800 (5,950) 1.5 m (5 ft.) 9800 (21,100) 5950 (12,800) 6150 (13,200) 3850 (8,250) 4300 (9,200) 2700 (5,750) Ground Line 4150 (9,650) 4150 (9,650) 9500 (20,400) 5650 (12,200) 5950 (12,800) 3700 (7,900) 4200 (9,000) 2600 (5,600) 1.5 m ( 5 ft.) 4800 (10,750) 4800 (10,750) 8400 (19,100) 3.0 m ( 10 ft.) (20,850) (20,850) (30,250) 4.5 m ( 15 ft.) (23,150) 8400 (19,100) (23,950) (23,150) 9400 (20,200) 9500 (20,350) 7650 (16,250) 5600 (12,050) 5650 (12,150) 5850 (12,650) 5850 (12,650) 5900 (12,750) 3600 (7,750) 3650 (7,850) 4150 (8,950) 2550 (5,550) 14 15

15 Buckets 210G / 210G LC A fu ine of buckets is offered to meet a wide variety of appications. Digging forces are with power boost. Buckets are equipped with John Deere TK-Series Bucket Teeth standard. Repaceabe cutting edges and a variety of teeth are avaiabe through John Deere Parts. Optiona side cutters add 150 mm (6 in.) to bucket widths. Capacities are SAE heaped ratings. Type Bucket Bucket Width Bucket Capacity Bucket Weight Bucket Dig Force Arm Dig Force 2.42 m (7 ft. 11 in.) Arm Dig Force 2.91 m (9 ft. 7 in.) Bucket Tip Radius Number of Teeth mm in. m 3 cu. yd. kg b. kn b. kn b. kn b. mm in. Heavy Duty , , , , , , , , , , , , Heavy Duty High Capacity , , , , , , , , , , , , , , , , ,112 2, , , , Bucket Seection Guide* 2.7 (3.5) 3 BUCKET SIZE m (cu. yd.) 2.3 (3.0) 1.9 (2.5) 1.5 (2.0) 1.0 (1.5) Deere 2.42-m (7 ft. 11 in.) Arm Deere 2.91-m (9 ft. 7 in.) Arm 0.8 (1.0) b./cu. yd. 1,200 1,400 1,800 2,000 2,200 2,400 2,600 2,800 3,000 3,200 3,600 kg/m Wet Peat Topsoi Coa Caiche Shae Dry Sand Dry Cay Limestone Wet Earth Wet Cay, Granite Moist Sand Wet Sand Wet Sand, Grave *Contact your John Deere deaer for optimum bucket and attachment seections. These recommendations are for genera conditions and average use. Does not incude optiona equipment such as thumbs or coupers. Larger buckets may be possibe when using ight materias, for fat and eve operations, ess compacted materias, and voume oading appications such as mass-excavation appications in idea conditions. Smaer buckets are recommended for adverse conditions such as off-eve appications, rocks, and uneven surfaces. Bucket capacity indicated is SAE heaped.

16 210G Lift Capacities (continued) Bodface type indicates hydrauicay imited capacity; ightface type indicates stabiity-imited capacities, in kg (b.). Ratings at bucket ift hook; machine equipped with 666-kg (1,468 b.) bucket, standard counterweight, and standard gauge; and situated on firm, eve, uniform supporting surface. Tota oad incudes weight of cabes, hook, etc. Figures do not exceed 87 percent of hydrauic capacities or 75 percent of weight needed to tip machine. A ift capacities are based on ISO (with power boost). Load Point Height 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) Horizonta Distance from Centerine of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side With 2.91-m (9 ft. 7 in.) arm and 800-mm (32 in.) tripe semi-grouser shoes 6.0 m (20 ft.) 4700 (10,300) 4500 (9,650) 4.5 m (15 ft.) 6150 (13,250) 6150 (13,250) 5250 (11,450) 4350 (9,400) 4600 (9,800) 2950 (6,250) 3.0 m (10 ft.) 8050 (17,350) 6500 (14,050) 6150 (13,350) 4150 (8,950) 4500 (9,650) 2850 (6,100) 1.5 m (5 ft.) 9800 (21,100) 6050 (13,000) 6250 (13,450) 3900 (8,450) 4350 (9,400) 2750 (5,850) Ground Line 4150 (9,650) 4150 (9,650) 9700 (20,800) 5750 (12,450) 6050 (13,050) 3750 (8,050) 4300 (9,200) 2650 (5,700) 1.5 m ( 5 ft.) 4800 (10,750) 4800 (10,750) 8400 (19,100) 3.0 m ( 10 ft.) (20,850) (20,850) (30,250) 4.5 m ( 15 ft.) (19,100) (24,350) (23,150) 9600 (20,600) 9650 (20,750) 7650 (16,250) (23,150) 210G LC Lift Capacities Bodface type indicates hydrauicay imited capacity; ightface type indicates stabiity-imited capacities, in kg (b.). Ratings at bucket ift hook; machine equipped with 666-kg (1,468 b.) bucket, standard counterweight, and standard gauge; and situated on firm, eve, uniform supporting surface. Tota oad incudes weight of cabes, hook, etc. Figures do not exceed 87 percent of hydrauic capacities or 75 percent of weight needed to tip machine. A ift capacities are based on ISO (with power boost). Load Point Height 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) Horizonta Distance from Centerine of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side With 2.42-m (7 ft. 11 in.) arm and 800-mm (32 in.) tripe semi-grouser shoes 6.0 m (20 ft.) 5200 (11,450) 4950 (10,600) 4.5 m (15 ft.) (20,650) (20,650) (14,800) (14,800) (12,450) (10,400) 3.0 m (10 ft.) 8750 (18,800) 7200 (15,550) 6550 (14,150) 4600 (9,950) 5150 (11,000) 3200 (6,850) 1.5 m (5 ft.) (22,100) 6750 (14,550) 7200 (15,450) 4400 (9,500) 5050 (10,800) 3100 (6,700) Ground Line (23,300) 1.5 m ( 5 ft.) (21,050) (21,050) (22,600) 3.0 m ( 10 ft.) (27,750) (27,750) (20,000) 4.5 m ( 15 ft.) 6400 (13,250) 5700 (12,250) 5750 (12,400) 5950 (12,850) 6550 (14,150) 6550 (14,100) 6650 (14,300) 6400 (13,250) 6000 (12,900) 6050 (13,000) 7050 (15,100) 7000 (15,050) 6650 (14,200) 3700 (7,900) 3700 (8,000) 4250 (9,200) 4250 (9,100) 4300 (9,300) 4250 (9,150) 4950 (10,650) 2650 (5,650) 3050 (6,550) 16 17

17 210G LC Lift Capacities (continued) Bodface type indicates hydrauicay imited capacity; ightface type indicates stabiity-imited capacities, in kg (b.). Ratings at bucket ift hook; machine equipped with 666-kg (1,468 b.) bucket, standard counterweight, and standard gauge; and situated on firm, eve, uniform supporting surface. Tota oad incudes weight of cabes, hook, etc. Figures do not exceed 87 percent of hydrauic capacities or 75 percent of weight needed to tip machine. A ift capacities are based on ISO (with power boost). Load Point Height 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.) Horizonta Distance from Centerine of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side With 2.91-m (9 ft. 7 in.) arm and 600-mm (24 in.) tripe semi-grouser shoes 6.0 m (20 ft.) 4700 (10,300) 4700 (10,300) 4.5 m (15 ft.) 6150 (13,250) 6150 (13,250) 5250 (11,450) 4700 (10,150) 4850 (10,650) 3150 (6,750) 3.0 m (10 ft.) 8050 (17,350) 7100 (15,250) 6150 (13,350) 4500 (9,650) 4950 (10,600) 3100 (6,600) 1.5 m (5 ft.) 9800 (21,100) 6600 (14,200) 6900 (14,900) 4250 (9,150) 4800 (10,350) 2950 (6,400) Ground Line 4150 (9,650) 4150 (9,650) (23,050) 6300 (13,600) 6750 (14,500) 4100 (8,800) 4700 (10,150) 2900 (6,200) 1.5 m ( 5 ft.) 4800 (10,750) 4800 (10,750) 8400 (19,100) 8400 (19,100) (23,000) 6250 (13,400) 6650 (14,300) 3.0 m ( 10 ft.) (20,850) (20,850) (30,250) (27,150) (21,050) (13,550) (14,400) 4.5 m ( 15 ft.) (23,150) (23,150) (16,250) (14,050) With 2.91-m (9 ft. 7 in.) arm and 700-mm (28 in.) tripe semi-grouser shoes 6.0 m (20 ft.) 4700 (10,300) 4.5 m (15 ft.) (13,250) (13,250) (11,450) 3.0 m (10 ft.) (17,350) (15,600) (13,350) 1.5 m (5 ft.) (21,100) (14,500) (15,200) Ground Line (9,650) (9,650) (23,050) (13,900) (14,850) 1.5 m ( 5 ft.) (10,750) (10,750) (19,100) (19,100) (23,000) (13,750) (14,650) 3.0 m ( 10 ft.) (20,850) (20,850) (30,250) (27,750) (21,050) (13,900) (14,750) 4.5 m ( 15 ft.) (23,150) (23,150) (16,250) (14,350) With 2.91-m (9 ft. 7 in.) arm and 800-mm (32 in.) tripe semi-grouser shoes 6.0 m (20 ft.) 4700 (10,300) 4.5 m (15 ft.) (13,250) (13,250) (11,450) 3.0 m (10 ft.) (17,350) (15,850) (13,350) 1.5 m (5 ft.) (21,100) (14,750) (15,200) Ground Line (9,650) (9,650) (23,050) (14,150) (15,100) 1.5 m ( 5 ft.) (10,750) (10,750) (19,100) (19,100) (23,000) (14,000) (14,950) 3.0 m ( 10 ft.) (20,850) (20,850) (30,250) (28,200) (21,050) (14,150) (15,050) 4.5 m ( 15 ft.) (23,150) (23,150) 7650 (16,250) 6800 (14,600) 4000 (8,600) 4050 (8,700) 4700 (10,300) 4800 (10,350) 4600 (9,850) 4350 (9,350) 4200 (9,000) 4100 (8,850) 4150 (8,950) 4700 (10,300) 4900 (10,500) 4650 (10,050) 4450 (9,550) 4250 (9,150) 4200 (9,000) 4200 (9,100) 4700 (10,100) 4850 (10,650) 5050 (10,850) 4950 (10,600) 4850 (10,400) 4800 (10,350) 4850 (10,650) 5150 (11,050) 5050 (10,800) 4950 (10,650) 4900 (10,600) 2850 (6,150) 3250 (6,950) 3150 (6,750) 3050 (6,550) 2950 (6,350) 2950 (6,350) 3300 (7,050) 3200 (6,900) 3100 (6,700) 3000 (6,500) 3000 (6,450)

18 Additiona equipment Key: Standard s Optiona or specia See your John Deere deaer for further information. 210G / 210G LC Engine Auto-ide system Automatic bet-tension device Batteries (2 12 vot) Cooant recovery tank Dua-eement dry-type air fiter Eectronic engine contro Encosed fan guard (conforms to SAE J1308) Engine cooant to 37 deg. C ( 34 deg. F) Fue fiter with water separator Fu-fow oi fiter Turbocharger with charge air cooer Coo-on-demand hydrauic-driven fan 500-hour engine-oi-change interva 70% (35 deg.) off-eve capabiity Engine-oi-samping vave Programmabe auto shutdown s Chrome exhaust stack s Severe-duty fue fiter s Hydrauic fan reverser s Engine cooant heater Hydrauic System Reduced-drift vave for boom down, arm in Auxiiary hydrauic vave section Spring-appied, hydrauicay reeased automatic swing brake Auxiiary hydrauic-fow adjustments through monitor Auto power ift 5,000-hour hydrauic-oi-change interva Hydrauic-oi-samping vave s Auxiiary hydrauic ines s Auxiiary piot and eectric contros s Hydrauic fiter restriction indicator kit s Load-owering contro device s Singe-peda prope contro s Contro pattern-change vave Undercarriage Panetary drive with axia piston motors Prope motor shieds Spring-appied, hydrauicay reeased automatic prope brake Track guides, front ider and center 2-speed prope with automatic shift Upper carrier roers (2) Seaed and ubricated track chain s Tripe semi-grouser shoes, 600 mm (24 in.) s Tripe semi-grouser shoes, 700 mm (28 in.) s Tripe semi-grouser shoes, 800 mm (32 in.) 210G / 210G LC Upperstructure Right-hand, eft-hand, and counterweight mirrors Vanda ocks with ignition key: Cab door / Service doors / Toobox Debris screen in side pane Remote-mounted engine oi and fue fiters Front Attachments Centraized ubrication system Dirt seas on a bucket pins Less boom and arm Oi-impregnated bushings Reinforced resin thrust pates Tungsten carbide therma coating on armto-bucket joint s Arm, 2.42 m (7 ft. 11 in.) s Arm, 2.91 m (9 ft. 7 in.) s Attachment quick-coupers s Boom cyinder with pumbing to mainframe for ess boom and arm s Buckets: Heavy duty / Heavy-duty high capacity / Side cutters and teeth s Materia camps s Super-ong fronts Operator s Station Meets ISO for ROPS Adjustabe independent-contro positions (evers-to-seat, seat-to-pedas) AM/FM radio Auto cimate contro/air conditioner/ heater/pressurizer Buit-in Operator s Manua storage compartment and manua Ce-phone power outet, 12 vot, 60 watt, 5 amp Coat hook Deuxe suspension coth seat with 100-mm (4 in.) adjustabe armrests Foor mat Front windshied wiper with intermittent speeds Gauges (iuminated): Engine cooant / Fue Horn, eectric Hour meter, eectric Hydrauic shutoff ever, a contros Hydrauic warm-up contro Interior ight Large cup hoder 210G / 210G LC s s s s s s s s Operator s Station (continued) Machine Information Center (MIC) Mode seectors (iuminated): Power modes (3) / Trave modes (2 with automatic shift) / Work mode (1) Mutifunction, coor LCD monitor with: Diagnostic capabiity / Mutipe-anguage capabiities / Maintenance tracking / Cock / System monitoring with aarm features: Auto-ide indicator, engine air ceaner restriction indicator ight, engine check, engine cooant temperature indicator ight with audibe aarm, engine oi pressure indicator ight with audibe aarm, owaternator-charge indicator ight, ow-fue indicator ight, faut code aert indicator, fue-rate dispay, wiper-mode indicator, work-ights-on indicator, and work-mode indicator Motion aarm with cance switch (conforms to SAE J994) Power-boost switch on right consoe ever Auxiiary hydrauic contro switches in right consoe ever SAE 2-ever contro pattern Seat bet, 51 mm (2 in.), retractabe Tinted gass Transparent tinted overhead hatch Hot/cod beverage compartment Air-suspension heated seat Hydrauic oi fiter restriction indicator ight Protection screens for cab front, rear, and side Seat bet, 76 mm (3 in.), non-retractabe Window vanda-protection covers Eectrica 100-amp aternator Bade-type muti-fused circuits Positive-termina battery covers JDLink wireess communication system (avaiabe in specific countries; see your deaer for detais) Rearview camera Cab extension wiring harness Lights Work ights: Haogen / One mounted on boom / One mounted on frame 2 ights mounted on cab / One mounted on right side of boom Net engine power is with standard equipment incuding air ceaner, exhaust system, aternator, and cooing fan, at test conditions specified per ISO No derating is required up to 3050-m (10,000 ft.) atitude. Specifications and design subject to change without notice. Wherever appicabe, specifications are in accordance with SAE standards. Except where otherwise noted, these specifications are based on units with 1065-mm (42 in.), 0.91-m 3 (1.19 cu. yd.), 886-kg (1,951 b.) genera-purpose buckets; 2.91-m (9 ft. 7 in.) arms; 4250-kg (9,370 b.) counterweights; 800-mm (32 in.) tripe semi-grouser shoes; fu fue tanks; and 79-kg (175 b.) operators. JohnDeere.com DKAX210G Litho in U.S.A. (15-01)