PRODUCT CATALOG 2014/15

Transcription

1 PRODUCT CATALOG 2014/15

2 2 DENTAL RATIO DENTAL RATIO stands for high quality at constantly fair prices made in Germany, by Hager & Meisinger. Our success is based on this consistent concept. And our users can rely on it. Many thanks for believing in us! Welcome to

3 DENTAL RATIO 3 CONTENT General information 4 Implant types and color codes 5 Symbol summary 6 Implant package 7 About DENTAL RATIO 8 Additional Products 8 OKTAGON Implant system 9 OKTAGON TISSUE LEVEL TISSUE LEVEL Implants and Restoration options 10 Indications TISSUE LEVEL 12 SURGICAL TISSUE LEVEL RP TL RP Implants Ø 3.3/Ø 4.1/Ø 4.8 mm 14 TD Implants Ø 4.1 mm 20 PROSTHETICS TISSUE LEVEL RP TL RP Standard 22 TL RP Solid Abutments 26 TL RP Ball Attachments 26 TL RP ALLIGATOR 28 SURGICAL TISSUE LEVEL WP TL WP Implants Ø 4.8 mm 30 PROSTHETICS TISSUE LEVEL WP TL WP Standard 32 OKTAGON BONE LEVEL BONE LEVEL Implants and Restoration options 34 Indications BONE LEVEL 36 SURGICAL BONE LEVEL NC BL NC Implants Ø 3.3 mm 38 PROSTHETICS BONE LEVEL NC BL NC Standard 40 BL NC ALLIGATOR 42 SURGICAL BONE LEVEL RC BL RC Implants Ø 4.1/Ø 4.8 mm 44 PROSTHETICS BONE LEVEL RC BL RC Standard 48 BL RC ALLIGATOR 50 ACCESORIES OKTAGON Instruments and Tools 52 OKTAGON Surgical kit mini 54 OKTAGON Surgical kit 56 INFORMATION 5 th ANNUAL HIGH COMPREHENSIVE IMPLANT SYMPOSIUM 58 Torque Values and Speeds 60 Materials 61 Manufacturer information 62 Guarantee & General Terms and conditions 66

4 4 DENTAL RATIO GENERAL INFORMATION GENERAL USE OF PRODUCTS Users of DRS International GmbH (hereinafter referred to as DENTAL RATIO) dental implants, and the other products distributed by DENTAL RATIO, must have knowledge of these products and information on how to handle them safely and expertly as described in the instructions for use. DENTAL RATIO products must always be used in accordance with the instructions for use provided. The user is obliged to use the product according to these instructions and ensure that it is indicated for the patient s specifi c situation. AVAILABILITY Some of the DENTAL RATIO products shown in this document may not be available in all countries. VALIDATION Upon publication of this catalog, all previous versions cease to be valid. PRODUCTION Made in Germany by Hager & Meisinger, a guarantee for high-grade medical products over the past 125 years. PRODUCT INFORMATION Further information on DENTAL RATIO products is available from your local sales representative or the download section at TRADEMARKS OKTAGON is a registered trademark of DRS International GmbH. NOTE All details descriptions, drawings or pictures in this product catalog are simply intended to describe the products and are non-binding. DENTAL RATIO assumes no liability for the veracity of the information. Changes and errors remain reserving.

5 DENTAL RATIO 5 IMPLANT TYPES AND COLOR CODES SYSTEM PLATFORM ENDOSSEOUS Ø PLATFORM Ø TISSUE LEVEL RP Regular Platform Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm TD Tapered Design Ø 4.1 mm Ø 4.8 mm Ø 4.8 mm Ø 6.5 mm GENERAL WP Wide Platform Ø 4.8 mm Ø 3.3 mm BONE LEVEL NC Narrow Connect Ø 3.3 mm RC Regular Connect Ø 4.1 mm Ø 4.8 mm Ø 4.1 mm Ø 4.8 mm COLOR CODES Yellow Endosseous implant diameter 3.3 mm Red Endosseous implant diameter 4.1 mm Green Endosseous implant diameter 4.8 mm

6 6 DENTAL RATIO SYMBOLS GENERAL g h Batch number Article number MIX Verpackung FSC C GFA certifi cation symbol denoting compliance with the Forest Stewardship Council for product packaging (FSC ) standard. IK L Gamma rays with at least 25 kgy (2.5 Mrad) Only sterile if the packaging is undamaged C 0044 xxxx identifi es the notifi ed body of the manufacturer Y D i H Store the packaging appropriately For single-use only Please refer to instructions manuel Shelf-life: 5 years. Use before: YYYY-MM only CAUTION: Federal law (U.S.A.) restricts this product to sale by or on the order of a dentist or physician

7 DENTAL RATIO 7 IMPLANT PACKAGE GENERAL Ø 4.8 mm L 12 mm RP 4.8 mm ART.NR 84DRSOKT01 OKTAGON 0824 OKTAGON IK L Y D i H Gammastrahlen mit mind. 25 kgy (2,5 Mrad) Sterilized with gamma radiation min. 25 kgy (2.5 mrad) Stériliser par rayons gamma min. 25 kgy (2,5 mrad) Esterilizado con rayons gamma minimo 25 kgy (2,5 mrad) Nur steril, wenn Packung unbeschädigt Sterility not guaranteed if package is broken Uniquement stérile, si l emballage intact Solo esteril si el embalaje no esta defectuoso Rot, wenn sterilisiert Red, if sterilized Rouge, si stérile Rojo, cuando esta esterilizado Packung sachgerecht lagern Store under appropriate conditions A stocker correctement Almacenar embalaje adecuadamente Nur zum einmaligen Gebrauch For disposable use only Pour usage unique Para uso unico Gebrauchsanweisung beachten! Consider directions for use! Remarquez le mode d emploie! Ver manual de usario! Haltbarkeit 5 jahre, verwendbar bis Valid for 5 years, expiry date Durée de stérilité 5 ans, utilisable jusque Periodo canucidad 5 anos, ultizable hasta RP OKTAGON Implant Ø 4.8 mm L=12 mm 1 pc. h g AXXXXX H ETIKETT 50 x 25 mm Ø 4.8 mm L 12 mm RP 4.8 mm TL RP TL RP TISSUE LEVEL REGULAR PLATFORM MIX Verpackung FSC C PRODUCED BY MADE IN GERMANY only VORSICHT: Gemäss dem US Bundesgesetz dar f d ieses Produkt nur an ausgebildete Mediziner ode r i n deren Auftrag verkauft werden. HAGER & MEISINGER GMBH, C AUTION: Federal law (U.S.A.) restricts this produ ct t o sale by or on the order of a dentist or physici an ART. NR 84DRSOKT01

8 8 DENTAL RATIO is specialised in dental implantology and supplies patent-free products at economical prices for maxillofacial surgeons, oral surgeons, dental practitioners and dental technicians including a broad range of prosthetic solutions. GENERAL BUY SMART is the DENTAL RATIO motto and stands for the link between high product quality and the intelligent use of resources and procedures for cost-effective products. Our aim is to improve the healthcare and quality of life of as many patients as possible by providing them with high-grade, yet fairly priced, dental medical products. QUALITY MADE IN GERMANY Our objective is the development, optimisation and supply of high-grade medical-technical materials and procedures. Well-known specialists in implantology provide DENTAL RATIO with professional and scientifi c counselling and support. Together with Hager & Meisinger, a manufacturer renowned for proven quality, DENTAL RATIO generates advantageous prices which are passed straight to the customer. Within the highly specialised and constantly growing implantology/surgery market, professional competence and acceptance by users are decisive factors for the long-term success of our systems. REASONABLE PRICES FOR DENTAL PROFESSIONALS AND PATIENTS Considering the continually increasing costs in the healthcare system, high quality products at fair prices play a vast role in providing good healthcare. The economic effi ciency of DENTAL RATIO benefi ts dental professionals and patients. COMPETENT COUNSELLING Our team has many years of experience in oral implantology. We use our entire expertise to advise you according to your own specifi c needs. ADDITIONAL PRODUCTS To extend the surgical and prosthetic possibilities we offer the following add-on products: SafeScraper COREFLON PTFE Suture LOCATOR Hybrid prostheses restoration DESS Products ALTUS Further product information can be found at REGENERATION The team at DRS International GmbH would be pleased to provide you with information on the NanoBone product line with regard to new dimensions in bone augmentation. NanoBone is a synthetic bone substitute and bone augmentation material respectively. The secret of its success lies in the high performance nano structure: nano crystalline hydroxylapatite (HA) is embedded into an extremely porous silica gel matrix.

9 DENTAL RATIO 9 OKTAGON IMPLANT SYSTEM Our OKTAGON implant system employs proven implantological concepts from daily practice and combines simplicity with versatility. The OKTAGON implant system consists of grade 4, pure titanium and is available in TISSUE LEVEL and BONE LEVEL versions. Tissue Level implants are connected to the prosthetic restoration via an 8 inner cone with additional octagonal rotation stop. GENERAL Bone Level implants are connected via a 15 inner cone and internal grooves whereby an octagonal geometry of the abutment secures the prosthetic components in position. * Data on File REM (x 5000) endosteal surface sand-blasted and acid etched The macro-roughness exhibits a roughness profi le of 20 to 40 µm with micro-roughness of 2.0 to 4.0 µm. The surfaces in the endosteal section are sandblasted with corundum (> 99% Al 2 O 3 = aluminium oxide) and acid-etched.

10 10 DENTAL RATIO OKTAGON TISSUE LEVEL IMPLANTS TISSUE LEVEL TL * Cover screw sterilized incl. ** Cover screw sterilized incl. TISSUE LEVEL OVERVIEW RP Ø 3.3 mm RP Ø 4.1 mm L 8.0 mm L 10.0 mm L 12.0 mm L 14.0 mm L 8.0 mm L 10.0 mm L 12.0 mm L 14.0 mm 72186* 72187* 72199* 72267* 31151* 31152* 31153* 82647* Coverscrews Coverscrews small large small large Healing abutments Healing abutments GH 2.0 mm GH 3.0 mm GH 4.5 mm GH 2.0 mm GH 3.0 mm GH 4.5 mm RP Ø 4.8 mm L 8.0 mm L 10.0 mm L 12.0 mm L 14.0 mm 50125* 50347* 50348* 50550* Coverscrews small large Healing abutments GH 2.0 mm GH 3.0 mm GH 4.5 mm TD Ø 4.1 mm L 10.0 mm L 12.0 mm 38150* 38415* Coverscrews small large Healing abutments GH 2.0 mm GH 3.0 mm GH 4.5 mm L 8.0 mm 93727** GH 2.0 mm WP Ø 4.8 mm L 10.0 mm L 12.0 mm 93728** 93729** Coverscrews small Healing abutments GH 3.0 mm GH 4.5 mm

11 DENTAL RATIO 11 RESTORATION OPTIONS Singlecrown Telescope RESTORATION OPTIONS Bar Bridge Solid Abutment Ball attachments Alligator/ Locator Note 1) 2) 2) 1) 2) 2) 1) 2) 2) 1) Bar restoration on 4 implants 2) As bridge abutment, splinted with an implant Ø 4.1/4.8 mm 1) 2) 2)

12 12 DENTAL RATIO INDICATIONS TISSUE LEVEL Implant-Ø 3.3 mm 4.1 mm 4.8 mm Lengths mm Platform RP x x x x x x x x x x x x RP/TD x x WP x x x TISSUE LEVEL INDICATIONS REGULAR PLATFORM (RP) OKTAGON 3.3 mm Ø RP implants are an alternative option for cases with a minimum jaw width of 5.5 mm and a mesiodistal gap of at least 7 mm between adjacent teeth. As their mechanical strength is lower than that of the 4.1 mm Ø implants, these implants should only be used for the following indications: EDENTULOUS JAW 4 Implants Ø 3.3 mm RP in combination with a bar. PARTIALLY DENTATE JAW Fixed restorations on 4.1 mm Ø implants should be splinted with a superstructure. OKTAGON Implants Ø 4,1 mm RP are an alternative option for cases with a minimum jaw width of 6.0 mm and a mesiodistal gap of 7.0 mm between adjacent teeth. OKTAGON Implants Ø 4.8 mm RP are an alternative option for cases with a minimum jaw width of 7.0 mm and a mesiodistal gap of 7.0 mm between adjacent teeth. SPECIFICATIONS RP REGULAR PLATFORM Implant-Ø mm Platform-Ø mm 4.8 Height mm 1.8 Polished Neck Pitch mm Outer-Ø mm Inner-Ø mm

13 DENTAL RATIO 13 TAPERED DESIGN (TD) IMMEDIATE AND EARLY IMPLANTATION Thanks to its geometry, the Tapered Design Implant combines the specifi c advantages of cylindrical and conical implants. The coronal section of this implant has a 1.8 mm high smooth surface and, due to its geometry, respects both the biological width as well as an extended range of indications. Depending on the surgical evaluation, this type of implant can be placed transgingivally, semigingivally or subgingivally thus providing for fl exible soft tissue management. INDICATION Mostly for immediate (same day as extraction) and early implantation (6-8 weeks post extraction). SPECIFICATIONS TD REGULAR PLATFORM Implant-Ø mm 4.1 Platform-Ø mm 4.8 Height mm 1.8 Polished Neck Pitch mm 0.8 Outer-Ø mm 4.8 Inner-Ø mm 3.5 TISSUE LEVEL INDICATIONS WIDE PLATFORM (WP) OKTAGON Implants Ø 4.8 mm WP are for cases where the jaw exceeds 7.0 mm in width and a mesiodistal gap of 8.5 mm between adjacent teeth. They are mainly indicated for restoring teeth with wider diameter cervical sections and are suitable for broader alveolar ridges and interdental spaces. SPECIFICATIONS WP WIDE PLATFORM Implant-Ø mm 4.8 Platform-Ø mm 6.5 Height mm 1.8 Polished Neck Pitch mm 1.25 Outer-Ø mm 4.8 Inner-Ø mm 4.2

14 14 DENTAL RATIO TISSUE LEVEL SURGICAL TL RP IMPLANT Ø 3.3 mm Cover screw sterilized incl. Regular Platform Ø 4.8 mm Height Polished Neck 1.8 mm Implants Gauges Drills Endosseous Ø 3.3 mm Parallel pins Round bur (max. 800 min 1 ) Ø 3.3 mm L 8.0 mm Ø 2.2 mm, L 33 mm TISSUE LEVEL SURGICAL RP Ø 3.3 mm L 10.0 mm Pilot drill and drill extension see page Ø 3.3 mm L 12.0 mm Ø 3.3 mm L 14.0 mm Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) Ø 2.2 mm, L 33 mm Ø 2.2 mm, L 41 mm Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) Ø 2.8 mm, L 33 mm Ø 2.8 mm, L 41 mm

15 DENTAL RATIO 15 Countersinks Instruments Cover screws and Healing abutments Countersinks (max. 400 min 1 ) Taps (max. 15 min 1 ) Cover screws Ø 2.8 mm, L 25 mm Ø 3.3 mm, L 33 mm small Ø 3.3 mm, L 42 mm large Healing abutments GH 2.0 mm GH 3.0 mm GH 4.5 mm TISSUE LEVEL SURGICAL RP

16 16 DENTAL RATIO TISSUE LEVEL SURGICAL TL RP IMPLANT Ø 4.1 mm Cover screw sterilized incl. Regular Platform Ø 4.8 mm Height Polished Neck 1.8 mm Implants Gauges Drills Endosseous Ø 4.1 mm Parallel pins Round bur (max. 800 min 1 ) Ø 4.1 mm L 8.0 mm Ø 2.2 mm, L 33 mm TISSUE LEVEL SURGICAL RP Ø 4.1 mm L 10.0 mm Pilot drill and drill extension see page Ø 4.1 mm L 12.0 mm Ø 4.1 mm L 14.0 mm Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) Ø 2.2 mm, L 33 mm Ø 2.2 mm, L 41 mm Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) Ø 2.8 mm, L 33 mm Ø 2.8 mm, L 41 mm Depth gauge Twist drills (max. 500 min 1 ) Ø 3.5 mm, L 33 mm Ø 3.5 mm, L 41 mm Ø 3.0 mm, L 25 mm

17 DENTAL RATIO 17 Countersinks Instruments Cover screws and Healing abutments Countersinks (max. 400 min 1 ) Taps (max. 15 min 1 ) Cover screws Ø 3.5 mm, L 25 mm Ø 4.1 mm, L 33 mm small Ø 4.1 mm, L 42 mm large Healing abutments GH 2.0 mm GH 3.0 mm GH 4.5 mm TISSUE LEVEL SURGICAL RP

18 18 DENTAL RATIO TISSUE LEVEL SURGICAL TL RP IMPLANT Ø 4.8 mm Cover screw sterilized incl. Regular Platform Ø 4.8 mm Height Polished Neck 1.8 mm Implants Gauges Drills Endosseous Ø 4.8 mm Parallel pins Round bur (max. 800 min 1 ) Ø 4.8 mm L 8.0 mm Ø 2.2 mm, L 33 mm TISSUE LEVEL SURGICAL RP Ø 4.8 mm L 10.0 mm Pilot drill and drill extension see page Ø 4.8 mm L 12.0 mm Ø 4.8 mm L 14.0 mm Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) Ø 2.2 mm, L 33 mm Ø 2.2 mm, L 41 mm Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) Ø 2.8 mm, L 33 mm Ø 2.8 mm, L 41 mm Depth gauge Twist drills (max. 500 min 1 ) Ø 3.5 mm, L 33 mm Ø 3.5 mm, L 41 mm Ø 3.0 mm, L 25 mm Twist drills (max. 400 min 1 ) Ø 4.2 mm, L 33 mm Ø 4.2 mm, L 41 mm

19 DENTAL RATIO 19 Countersinks Instruments Cover screws and Healing abutments Countersinks (max. 400 min 1 ) Taps (max. 15 min 1 ) Cover screws Ø 4.2 mm, L 25 mm Ø 4.8 mm, L 33 mm small Ø 4.8 mm, L 42 mm large Healing abutments GH 2.0 mm GH 3.0 mm GH 4.5 mm TISSUE LEVEL SURGICAL RP

20 20 DENTAL RATIO TISSUE LEVEL SURGICAL (TAPERED DESIGN) TL RP/TD IMPLANT Ø 4.1 mm Cover screw sterilized incl. Regular Platform Ø 4.8 mm Height Polished Neck 1.8 mm Implants Gauges Drills Endosseous Ø 4.1 mm Parallel pins Round bur (max. 800 min 1 ) Ø 4.1 mm L 10.0 mm Ø 2.2 mm, L 33 mm TISSUE LEVEL SURGICAL RP TD Ø 4.1 mm L 12.0 mm Pilot drill and drill extension see page Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) Ø 2.2 mm, L 33 mm Ø 2.2 mm, L 41 mm Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) Ø 2.8 mm, L 33 mm Ø 2.8 mm, L 41 mm Depth gauge Twist drills (max. 500 min 1 ) Ø 3.5 mm, L 33 mm Ø 3.5 mm, L 41 mm Ø 3.0 mm, L 25 mm

21 DENTAL RATIO 21 Countersinks Instruments Cover screws und Healing abutments Countersinks (max. 400 min 1 ) Taps (max. 15 min 1 ) Cover screws Ø 3.5 mm, L 37 mm Ø 4.1 mm, L 23 mm small large Healing abutments GH 2.0 mm GH 3.0 mm GH 4.5 mm TISSUE LEVEL SURGICAL RP TD

22 22 DENTAL RATIO TISSUE LEVEL PROSTHETICS RP STANDARD Impression open tray TISSUE LEVEL PROSTHETICS RP Single crown Impression closed tray Model } * screwed } * Single crown cementable } * * only to use combined

23 DENTAL RATIO 23 Article-No. Product Article-No. Product TL RP Impression cap with integral guide screw (open tray) TL RP Impression cap with integral guide screw (closed tray) TL RP Impression cap (snap-on) TL RP Abutment angled, 15 B H 6.7 mm, screwed/cementable TL RP Abutment angled, 15 B H 6.7 mm, cementable, parallel TL RP Abutment angled, 15 B H 6.7 mm, cementable, conical TL RP Positioning cylinder red TL RP Abutment angled, 20 A H 6.7 mm, cementable, parallel TL RP Implant analog TL RP Abutment angled, 20 A H 6.7 mm, cementable, conical TL RP Abutment, H 5.5 mm cementable incl TL RP Basic screw for TL RP Plastic coping bridge/bar for TL RP Plastic coping crown for TL RP Abutment H 1.5 mm, screwed TL RP Plastic coping bridge/bar for TL RP Plastic coping crown for TL RP Abutment angled, 15 A H 6.7 mm, screwed/cementable TL RP Abutment angled, 15 A H 6.7 mm, cementable, parallel TL RP Abutment angled, 15 A H 6.7 mm, cementable, conical TL RP Abutment angled, 20 B H 6.7 mm, cementable, parallel TL RP Abutment angled, 20 B H 6.7 mm, cementable, conical TL RP Plastic shoulder for Abutment, angled, 15 / TL RP Abutment, excl pcs. multifunctional (PSU) TL RP Fixation screw HEX/OKT for TL RP Abutment Titanium-adhesive base TL RP Abutment Titanium-adhesive base, incl TL RP Basic screw for TL RP Basic screw for CAD/CAM TL RP/WP Occlusal screw for and TISSUE LEVEL PROSTHETICS RP ABUTMENTS ANGLED VERSIONS A + B Choice of optimal version for individual care Version A Bending over the edge of the OKTAGON Marked by one point. Version B Bending over the surface of the OKTAGON Marked by two points. A = Bending over edge Marked: one point B = Bending over surface Marked: two points

24 24 DENTAL RATIO TISSUE LEVEL PROSTHETICS RP STANDARD Impression open tray TISSUE LEVEL PROSTHETICS RP Telescope/Bar Impression closed tray Telescope Model } * } * Hybrid Bar } * * only to use combined

25 DENTAL RATIO 25 Article-No. Product Article-No. Product TL RP Impression cap with integral guide screw (open tray) TL RP Impression cap with integral guide screw (closed tray) TL RP Impression cap (snap-on) TL RP Abutment angled, 15 B H 6.7 mm, screwed/cementable TL RP Abutment angled, 15 B H 6.7 mm, cementable, parallel TL RP Abutment angled, 15 B H 6.7 mm, cementable, conical TL RP Positioning cylinder red TL RP Abutment angled, 20 A H 6.7 mm, cementable, parallel TL RP Implant analog TL RP Abutment angled, 20 A H 6.7 mm, cementable, conical TL RP Abutment, H 5.5 mm cementable incl TL RP Basic screw for TL RP Plastic coping bridge/bar for TL RP Plastic coping crown for TL RP Abutment H 1.5 mm, screwed TL RP Plastic coping bridge/bar for TL RP Plastic coping crown for TL RP Abutment angled, 15 A H 6.7 mm, screwed/cementable TL RP Abutment angled, 15 A H 6.7 mm, cementable, parallel TL RP Abutment angled, 15 A H 6.7 mm, cementable, conical TL RP Abutment angled, 20 B H 6.7 mm, cementable, parallel TL RP Abutment angled, 20 B H 6.7 mm, cementable, conical TL RP Plastic shoulder for Abutment, angled, 15 / TL RP Abutment, excl pcs. multifunctional (PSU) TL RP Fixation screw HEX/OKT for TL RP Abutment Titanium-adhesive base TL RP Abutment Titanium-adhesive base, incl TL RP Basic screw for TL RP Basic screw for CAD/CAM TL RP/WP Occlusal screw for and TISSUE LEVEL PROSTHETICS RP ABUTMENTS ANGLED VERSIONS A + B Choice of optimal version for individual care Version A Bending over the edge of the OKTAGON Marked by one point. Version B Bending over the surface of the OKTAGON Marked by two points. A = Bending over edge Marked: one point B = Bending over surface Marked: two points

26 26 DENTAL RATIO TISSUE LEVEL PROSTHETICS RP SOLID ABUTMENTS TISSUE LEVEL PROSTHETICS RP Single crown Bridge Solid abutments Crown Bridge BALL ATTACHMENTS Hybrid Driver

27 DENTAL RATIO 27 Article-No. Product Article-No. Product TL RP Solid abutment yellow, 6, H 4.0 mm TL RP Solid abutment grey, 6, H 5.5 mm TL RP Solid abutment blue, 6, H 7.0 mm TL RP Plastic coping for solid abutment, bridge TL RP Plastic coping for solid abutment, crown TL RP Solid abutment driver 6, L 15 mm, (S) TL RP Solid abutment driver 6, L 21 mm, (M) TL RP Impression cap (snap-on) TL RP Positioning cylinder yellow TL RP Positioning cylinder grey TL RP Positioning cylinder blue TL RP Solid abutment analog yellow TL RP Solid abutment analog grey TL RP Solid abutment analog blue TISSUE LEVEL PROSTHETICS RP Article-No. Product Article-No. Product TL RP Abutment ball attachment GH 0.0 mm TL RP Implant analog for ball attachment TL RP Ball attachment driver TL RP Matrix for ball attachment (incl. all O-Rings) TL RP O-Ring 70 shore red Pull-off weight light TL RP O-Ring 80 shore blue Pull-off weight medium TL RP O-Ring 90 shore black Pull-off weight strong

28 28 DENTAL RATIO TISSUE LEVEL PROSTHETICS RP ALLIGATOR Hybrid Impression Model TISSUE LEVEL PROSTHETICS RP Impression Model Hybrid

29 DENTAL RATIO 29 Article-No. Product Article-No. Product TL RP ALLIGATOR Abutment GH 1.0 mm TL RP ALLIGATOR Abutment GH 2.0 mm TL RP ALLIGATOR Abutment GH 3.0 mm TL RP ALLIGATOR Abutment GH 4.0 mm TL RP ALLIGATOR Abutment angled, 15, H 1.5 mm TL RP ALLIGATOR Abutment angled, 15, H 3.0 mm OKTAGON Screwdriver one-piece, L 24 mm TL/BL ALLIGATOR Attachment driver, L 15 mm NOVALOC S W I S S M A D E Equipment box with 3 tools (excluding consumables) Processing package Titanium 2 pcs. Titanium matrix housing incl. PEEK mounting insert black Retention inserts white, yellow, green Mounting collar silicone Processing package PEEK 2 pcs. PEEK matrix housing incl. PEEK mounting insert black Retention inserts white, yellow, green Mounting collar silicone Retention insert red 4 pcs. PEEK, pull-off weight extra-light Retention insert white 4 pcs. PEEK, pull-off weight light Retention insert yellow 4 pcs. PEEK, pull-off weight medium Retention insert green 4 pcs. PEEK, pull-off weight strong Retention insert blue 4 pcs. PEEK, pull-off weight extra-strong Retention insert black 4 pcs. PEEK, pull-off weight ultra-strong Demounting tool for mounting inserts + model analogue reposition aid, blue Mounting and demounting tool for retention inserts, brown Matrix housing extractor grey Titanium matrix housing 4 pcs. with attachment option incl. PEEK mounting insert Titanium matrix housing 4 pcs. incl. PEEK mounting insert PEEK matrix housing 4 pcs. incl. PEEK mounting insert PEEK mounting insert 4 pcs. black Model analog 4 pcs. Aluminium Forming/fi xing matrix, red 4 pcs. PEEK Processing spacer, white 4 pcs. POM C Mounting collar 10 pcs. silicone TISSUE LEVEL PROSTHETICS RP

30 30 DENTAL RATIO TISSUE LEVEL SURGICAL TL WP IMPLANT Ø 4.8 mm Cover screw sterilized incl. Wide Platform Ø 6.5 mm Height Polished Neck 1.8 mm Implants Gauges Drills Endosseous Ø 4.8 mm Parallel pins Round bur (max. 800 min 1 ) Ø 4.8 mm L 8.0 mm Ø 2.2 mm, L 33 mm TISSUE LEVEL SURGICAL WP Ø 4.8 mm L 10.0 mm Pilot drill and drill extension see page Ø 4.8 mm L 12.0 mm Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) Ø 2.2 mm, L 33 mm Ø 2.2 mm, L 41 mm Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) Ø 2.8 mm, L 33 mm Ø 2.8 mm, L 41 mm Depth gauge Twist drills (max. 500 min 1 ) Ø 3.5 mm, L 33 mm Ø 3.5 mm, L 41 mm Ø 3.0 mm, L 25 mm Twist drills (max. 400 min 1 ) Ø 4.2 mm, L 33 mm Ø 4.2 mm, L 41 mm

31 DENTAL RATIO 31 Countersinks Instruments Cover screws und Healing abutments Countersinks (max. 400 min 1 ) Taps (max. 15 min 1 ) Cover screws Ø 4.2 mm, L 25 mm Ø 4.8 mm, L 33 mm small Ø 4.8 mm, L 42 mm Healing abutments GH 2.0 mm GH 3.0 mm GH 4.5 mm TISSUE LEVEL SURGICAL WP

32 32 DENTAL RATIO TISSUE LEVEL PROSTHETICS WP STANDARD Impression Model Single crown Bridge TISSUE LEVEL PROSTHETICS WP cementable screwed Bridge/Bar Crown 31160

33 DENTAL RATIO 33 Article-No. Product Article-No. Product TL WP Impression cap with integral guide screw (open tray) TL WP Abutment angled, 15 A H 5.5 mm, cementable TL WP Implant analog TL WP Abutment angled, 15 B H 5.5 mm, cementable TL WP Abutment H 1.5 mm, screwed TL WP Abutment H 5.5 mm, cementable TL RP/WP Occlusal screw for and TL WP Plastic coping bridge/bar for TL WP Plastic coping crown for TISSUE LEVEL PROSTHETICS WP ABUTMENTS ANGLED VERSIONS A + B Choice of optimal version for individual care Version A Bending over the edge of the OKTAGON Marked by one point. Version B Bending over the surface of the OKTAGON Marked by two points. A = Bending over edge Marked: one point B = Bending over surface Marked: two points

34 34 DENTAL RATIO OKTAGON BONE LEVEL IMPLANTS BONE LEVEL BL * Cover screw sterilized incl. ** Cover screw sterilized incl. Ø 3.6 mm Ø 4.8 mm L 8.0 mm 22009* GH 2.0 mm NC Ø 3.3 mm L 10.0 mm L 12.0 mm L 14.0 mm 22010* 22011* 22012* Closurescrews GH 0.0 mm GH 0.5 mm Healing abutments GH 3.5 mm GH 5.0 mm Ø 5.0 mm Ø 6.5 mm Ø 7.0 mm BONE LEVEL SUMMARY RC Ø 4.1 mm RC Ø 4.8 mm L 8.0 mm L 10.0 mm L 12.0 mm L 14.0 mm L 8.0 mm L 10.0 mm L 12.0 mm L 14.0 mm 22001** 22002** 22003** 22004** 22005** 22006** 22007** 22008** Closurescrews Closurescrews GH 0.0 mm GH 0.5 mm GH 0.0 mm GH 0.5 mm Healing abutments Healing abutments GH 2.0 mm GH 4.0 mm GH 6.0 mm GH 2.0 mm GH 4.0 mm GH 6.0 mm Ø 5.0 mm Ø 6.5 mm Ø 7.0 mm

35 DENTAL RATIO 35 RESTORATION OPTIONS Singlecrown RESTORATION OPTIONS Telescope Bar Bridge Alligator/ Locator Note * * Insertion in the molar region is not recommended. Applies to all BL NC implants Ø 3.3 mm.

36 36 DENTAL RATIO INDICATIONS BONE LEVEL NARROW CONNECT (NC) Implant-Ø 3.3 mm Lengths mm BL NC x x x x For bone level restorations in combination with subgingival and transgingival healing. 3.3 mm Ø Bone Level Implants are an alternative option for cases with a minimum jaw width of 6.0 mm and a mesiodistal gap of 5.0 mm between adjacent teeth. The BONE LEVEL NC implants Ø 3.3 mm are only to be restored in combination with the color-coded (yellow) NC abutments. Except ALLIGATOR and LOCATOR Abutments. BONE LEVEL INDICATIONS SPECIFICATIONS BL NC Implant-Ø mm 3.3 Platform-Ø mm 3.3 Pitch mm 0.8 Outer-Ø mm 3.3 Inner-Ø mm 2.8 Note The Countersink is used for a conical preparation of the implant site.

37 DENTAL RATIO 37 INDICATIONS BONE LEVEL REGULAR CONNECT (RC) Implant-Ø 4.1 mm 4.8 mm Lengths mm BL RC x x x x x x x x For bone level restorations in combination with subgingival and transgingival healing. 4.1 mm Ø Bone Level Implants are an alternative option for cases with a minimum jaw width of 6.0 mm and a mesiodistal gap of 6.0 mm between adjacent teeth. 4.8 mm Ø Bone Level Implants are for cases with a minimum jaw width of 7.0 mm and a mesiodistal gap of 7.0 mm between adjacent teeth. The BONE LEVEL NC implants Ø 3.3 mm are only to be restored in combination with the color-coded (magenta) NC abutments. Except ALLIGATOR and LOCATOR Abutments. SPECIFICATIONS BL RC Implant-Ø mm Platform-Ø mm Pitch mm Outer-Ø mm Inner-Ø mm BONE LEVEL INDICATIONS Note The Countersink is used for a conical preparation of the implant site.

38 38 DENTAL RATIO BONE LEVEL SURGICAL BL NC IMPLANT Ø 3.3 mm Cover screw sterilized incl. Implants Gauges Drills Endosseous Ø 3.3 mm Parallel pins Round bur (max. 800 min 1 ) Ø 3.3 mm L 8.0 mm Ø 2.2 mm, L 33 mm Ø 3.3 mm L 10.0 mm Pilot drill and drill extension see page Ø 3.3 mm L 12.0 mm Ø 3.3 mm L 14.0 mm Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) Ø 2.2 mm, L 33 mm Ø 2.2 mm, L 41 mm BONE LEVEL SURGICAL NC Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) Ø 2.8 mm, L 33 mm Ø 2.8 mm, L 41 mm

39 DENTAL RATIO 39 Countersinks Instruments Cover screws und Healing abutments Countersinks (max. 300 min 1 ) Taps (max. 15 min 1 ) Cover screws Ø 3.3 mm, L 26 mm Ø 3.3 mm, L 23 mm GH 0.0 mm Ø 3.3 mm, L 35 mm GH 0.5 mm Healing abutments Ø 3.6 mm GH 2.0 mm GH 3.5 mm GH 5.0 mm Healing abutments Ø 4.8 mm GH 2.0 mm GH 3.5 mm GH 5.0 mm BONE LEVEL SURGICAL NC

40 40 DENTAL RATIO BONE LEVEL PROSTHETICS NC STANDARD Impression Model Single crown Bridge BONE LEVEL PROSTHETICS NC cementable } Bridge Crown

41 DENTAL RATIO 41 Article-No. Product Article-No. Product BL NC Impression cap, Ø 4.0 mm with integral guide screw (open tray) BL NC Abutment, 0, Ø 3.5 mm L 5.5 mm, GH 1.0 mm, cementable basic screw incl BL NC Implant analog BL NC Abutment, 0, Ø 3.5 mm L 5.5 mm, GH 2.0 mm, cementable basic screw incl BL NC Abutment, 18, Ø 3.5 mm L 6.0 mm, GH 1.5 mm, cementable basic screw incl BL NC Abutment, 0, Ø 3.5 mm L 5.5 mm, GH 3.0 mm, cementable basic screw incl BL NC Abutment, 18, Ø 3.5 mm L 6.0 mm, GH 3.0 mm, cementable basic screw incl BL NC Burn-out plastic coping Ø 3.5 mm, for Bridge BL NC Abutment, 0, Ø 3.5 mm L 6.0 mm, GH 2.0 mm, cementable basic screw incl BL NC Abutment, 0, Ø 3.5 mm L 6.0 mm, GH 3.5 mm, cementable basic screw incl BL NC Basic screw L 7.85 mm BL NC Burn-out plastic coping Ø 3.5 mm, for Crown BL NC Basic screw L 7.85 mm BL NC Basic screw for CAD/CAM BONE LEVEL PROSTHETICS NC

42 42 DENTAL RATIO BONE LEVEL PROSTHETICS NC ALLIGATOR Hybrid Impression Model Impression Model BONE LEVEL PROSTHETICS NC Hybrid

43 DENTAL RATIO 43 Article-No. Product Article-No. Product BL NC ALLIGATOR Abutment GH 2.0 mm BL NC ALLIGATOR Abutment GH 3.0 mm BL NC ALLIGATOR Abutment GH 4.0 mm BL NC ALLIGATOR Abutment GH 5.0 mm BL NC ALLIGATOR Abutment angled, 15, GH 3.0 mm BL NC ALLIGATOR Abutment angled, 15, GH 4.0 mm BL NC/RC ALLIGATOR basic screw for 22041/22042/22129/ OKTAGON Screwdriver one-piece, L 24 mm TL/BL ALLIGATOR Attachment driver, L 15 mm NOVALOC S W I S S M A D E Equipment Box with 3 tools , , (excluding consumables) Processing package Titanium 2 pcs. Titanium matrix housing incl. PEEK mounting insert black Retention inserts white, yellow, green Mounting collar silicone Processing package PEEK 2 pcs. PEEK matrix housing incl. PEEK mounting insert black Retention inserts white, yellow, green Mounting collar silicone Retention insert red 4 pcs. PEEK, pull-off weight extra-light Retention insert white 4 pcs. PEEK, pull-off weight light Retention insert yellow 4 pcs. PEEK, pull-off weight medium Retention insert green 4 pcs. PEEK, pull-off weight strong Retention insert blue 4 pcs. PEEK, pull-off weight extra-strong Retention insert black 4 pcs. PEEK, pull-off weight ultra-strong Demounting tool for mounting inserts + model analogue reposition aid, blue Mounting and demounting tool for retention inserts, brown Matrix housing extractor grey Titanium matrix housing 4 pcs. with attachment option incl. PEEK mounting insert Titanium matrix housing 4 pcs. incl. PEEK mounting insert PEEK matrix housing 4 pcs. incl. PEEK mounting insert PEEK mounting insert 4 pcs. black Model analog 4 pcs. Aluminium Forming/fi xing matrix, red 4 pcs. PEEK Processing spacer, white 4 pcs. POM C Mounting collar 10 pcs. silicone BONE LEVEL PROSTHETICS NC

44 44 DENTAL RATIO BONE LEVEL SURGICAL BL RC IMPLANT Ø 4.1 mm Cover screw sterilized incl. Implants Gauges Drills Endosseous Ø 4.1 mm Parallel pins Round bur (max. 800 min 1 ) Ø 4.1 mm L 8.0 mm Ø 2.2 mm, L 33 mm Ø 4.1 mm L 10.0 mm Pilot drill and drill extension see page Ø 4.1 mm L 12.0 mm Ø 4.1 mm L 14.0 mm Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) Ø 2.2 mm, L 33 mm Ø 2.2 mm, L 41 mm BONE LEVEL SURGICAL RC Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) Ø 2.8 mm, L 33 mm Ø 2.8 mm, L 41 mm Depth gauge Twist drills (max. 500 min 1 ) Ø 3.5 mm, L 33 mm Ø 3.5 mm, L 41 mm Ø 3.0 mm, L 25 mm

45 DENTAL RATIO 45 Countersinks Instruments Cover screws und Healing abutments Countersinks (max. 300 min 1 ) Taps (max. 15 min 1 ) Cover screws Ø 4.1 mm, L 26 mm Ø 4.1 mm, L 23 mm GH 0.0 mm Ø 4.1 mm, L 35 mm GH 0.5 mm Healing abutments Ø 5.0 mm GH 2.0 mm GH 4.0 mm GH 6.0 mm Healing abutments Ø 6.5 mm GH 2.0 mm GH 4.0 mm GH 6.0 mm BONE LEVEL SURGICAL RC Healing abutment Ø 7.0 mm temporary coping GH 4.0 mm

46 46 DENTAL RATIO BONE LEVEL SURGICAL BL RC IMPLANT Ø 4.8 mm Cover screw sterilized incl. Implants Gauges Drills Endosseous Ø 4.8 mm Parallel pins Round bur (max. 800 min 1 ) Ø 4.8 mm L 8.0 mm Ø 2.2 mm, L 33 mm Ø 4.8 mm L 10.0 mm Pilot drill and drill extension see page Ø 4.8 mm L 12.0 mm Ø 4.8 mm L 14.0 mm Ø 2.0/3.0 mm Depth gauge Twist drills (max. 800 min 1 ) Ø 2.2 mm, L 33 mm Ø 2.2 mm, L 41 mm BONE LEVEL SURGICAL RC Ø 2.0 mm, L 25 mm Twist drills (max. 600 min 1 ) Ø 2.8 mm, L 33 mm Ø 2.8 mm, L 41 mm Depth gauge Twist drills (max. 500 min 1 ) Ø 3.5 mm, L 33 mm Ø 3.5 mm, L 41 mm Ø 3.0 mm, L 25 mm Twist drills (max. 400 min 1 ) Ø 4.2 mm, L 33 mm Ø 4.2 mm, L 41 mm

47 DENTAL RATIO 47 Countersinks Instruments Cover screws und Healing abutments Countersinks (max. 300 min 1 ) Taps (max. 15 min 1 ) Cover screws Ø 4.8 mm, L 26 mm Ø 4.8 mm, L 23 mm GH 0.0 mm Ø 4.8 mm, L 35 mm GH 0.5 mm Healing abutments Ø 5.0 mm GH 2.0 mm GH 4.0 mm GH 6.0 mm Healing abutments Ø 6.5 mm GH 2.0 mm GH 4.0 mm GH 6.0 mm BONE LEVEL SURGICAL RC Healing abutment Ø 7.0 mm temporary coping GH 4.0 mm

48 48 DENTAL RATIO BONE LEVEL PROSTHETICS RC STANDARD Impression Model Single crown Bridge temporary BONE LEVEL PROSTHETICS RC cementable OKTAGON BONE LEVEL ABUTMENTS } } Bridge Crown Bridge Crown The conical joint between abutment and implant provides a safe support and power transmission of the abutment to the implant and ensures the tightness of the joint. The deep fi xture of the screw in the implant leads to a functional stress distribution and due to this provides a high breaking strength and endurance. The endurance of the joint is proved according to DIN EN ISO [Data on fi le]. NOTE The fabrication of a transmission key is recommended.

49 DENTAL RATIO 49 Article-No. Product Article-No. Product BL RC Impression cap, Ø 4.5 mm with integral guide screw (open tray) BL RC Impression cap, Ø 5.0 mm with integral guide screw (open tray) BL RC Impression cap, Ø 6.5 mm with integral guide screw (open tray) BL RC Implant analog BL RC Temporary coping 0, Ø 7.0 mm, customizable basic screw incl BL RC basic screw also suiting for CAD/CAM BL RC Abutment, 18, Ø 5.0 mm L 8.0 mm, GH 1.5 mm, cementable incl. basic screw BL RC Abutment, 18, Ø 5.0 mm L 8.0 mm, GH 3.0 mm, cementable incl. basic screw BL RC Abutment, 0, Ø 5.0 mm L 6.0 mm, GH 1.0 mm, cementable incl. basic screw BL RC Abutment, 0, Ø 5.0 mm L 6.0 mm, GH 2.0 mm, cementable incl. basic screw BL RC Abutment, 0, Ø 5.0 mm L 6.0 mm, GH 4.0 mm, cementable incl. basic screw BL RC Burn-out plastic coping Ø 5.0 mm, for Bridge BL RC Abutment, 0, Ø 6.5 mm L 6.0 mm, GH 1.0 mm, cementable incl. basic screw BL RC Abutment, 0, Ø 6.5 mm L 6.0 mm, GH 2.0 mm, cementable incl. basic screw BL RC Abutment, 0, Ø 6.5 mm L 6.0 mm, GH 4.0 mm, cementable incl. basic screw BL RC Burn-out plastic coping Ø 6.5 mm, for Bridge BL RC Burn-out plastic coping Ø 6.5 mm, for Crown BL RC basic screw, L 7.5 mm for cementablees Abutment BONE LEVEL PROSTHETICS RC BL RC Burn-out plastic coping Ø 5.0 mm, for Crown

50 50 DENTAL RATIO BONE LEVEL PROSTHETICS RC ALLIGATOR Impression Model Hybrid Impression Model BONE LEVEL PROSTHETICS NC Hybrid

51 DENTAL RATIO 51 Article-No. Product Article-No. Product BL RC ALLIGATOR Abutment GH 1.0 mm BL RC ALLIGATOR Abutment GH 2.0 mm BL RC ALLIGATOR Abutment GH 3.0 mm BL RC ALLIGATOR Abutment GH 4.0 mm BL RC ALLIGATOR Abutment GH 5.0 mm BL RC ALLIGATOR Abutment angled, 15, GH 3.0 mm BL RC ALLIGATOR Abutment angled, 15, GH 4.0 mm BL NC/RC ALLIGATOR Basic screw for 22041/22042/22129/ OKTAGON Screwdriver one-piece, L 24 mm TL/BL ALLIGATOR attachment driver, L 15 mm NOVALOC S W I S S M A D E Equipment Box with 3 tools , , (excluding consumables) Demounting tool for mounting inserts + model analogue reposition aid, blue Mounting and demounting tool for retention inserts, brown Processing package Titanium 2 pcs. Titanium matrix housing incl. PEEK mounting insert black Retention inserts white, yellow, green Mounting collar silicone Processing package PEEK 2 pcs. PEEK matrix housing incl. PEEK mounting insert black Retention inserts white, yellow, green Mounting collar silicone Retention insert red 4 pcs. PEEK, pull-off weight extra-light Retention insert white 4 pcs. PEEK, pull-off weight light Retention insert yellow 4 pcs. PEEK, pull-off weight medium Retention insert green 4 pcs. PEEK, pull-off weight strong Retention insert blue 4 pcs. PEEK, pull-off weight extra-strong Retention insert black 4 pcs. PEEK, pull-off weight ultra-strong Matrix housing extractor grey Titanium matrix housing 4 pcs. with attachment option incl. PEEK mounting insert Titanium matrix housing 4 pcs. incl. PEEK mounting insert PEEK matrix housing 4 pcs. incl. PEEK mounting insert PEEK mounting insert 4 pcs. black Model analog 4 pcs. Aluminium Forming / fi xing matrix, red 4 pcs. PEEK Processing spacer, white 4 pcs. POM C Mounting collar 10 pcs. silicone BONE LEVEL PROSTHETICS NC

52 52 DENTAL RATIO OKTAGON INSTRUMENTS AND TOOLS PARALLEL PINS Ø 2.0/3.0 mm RP/TD/WP/BL DEPTH GAUGES RP/TD/WP/BL Ø 2.0 mm Ø 3.0 mm L 25 mm DRILL TOOLS Pilot drill Ø 1.54 mm RP/TD/WP/BL Drill extension L 27 mm ADAPTER RP/TD/WP/BL INSTRUMENTS SCREWDRIVER RP/TD/WP/BL EMERGENCY 24h TOOLS RP/TD/WP BL NC BL RC

53 DENTAL RATIO 53 TOOLS RP/TD/WP/BL Torque ratchet Holding key Altus Gingiva Height Measuring Tool for precise determination of the gingiva height on implants and selection of the correct abutment height X-Ray reference spheres COMPONENTS RP/TD/WP/BL 82895* 82894* Surgical kit * Figures show surgical kits with content DRILL-STOP CONTROL RP/TD/WP/BL RF018 TL/BL Pilot drill Ø 1.8 mm L 12.0 mm TDS15020 TL/BL Twist drill Ø 2.0 mm L 33.5 mm TDS15028 TL/BL Twist drill Ø 2.8 mm L 33.5 mm TDS15035 TL/BL Twist drill Ø 3.5 mm L 33.5 mm TDS15042 TL/BL Twist drill Ø 4.2 mm L 33.5 mm CL032 TL/BL Drill Sleeve 14.0 mm CL034 TL/BL Drill Sleeve 12.0 mm CL036 TL/BL Drill Sleeve 10.0 mm CL038 TL/BL Drill Sleeve 8.0 mm CL040 TL/BL Drill Sleeve 6.0 mm W 80 x H 37 x D 25 mm INSTRUMENTS

54 54 DENTAL RATIO OKTAGON SURGICAL KIT MINI Round bur Twist drill Twist drill Twist drill Tap (max. 800 min 1 ) (max. 600 min 1 ) (max. 500 min 1 ) (max. 400 min 1 ) (max. 15 min 1 ) Ø 2.2 mm Ø 2.8 mm Ø 3.5 mm Ø 4.2 mm Ø 3.3 mm BL Twist drill Tap Tap Tap Parallel-Pin (max. 800 min 1 ) (max. 15 min 1 ) (max. 15 min 1 ) (max. 15 min 1 ) Ø 2.2 mm Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm Ø 2.0/3.0 mm INSTRUMENTS Pilot drill Tap Countersink Countersink (max. 800 min 1 ) (max. 15 min 1 ) (max. 300 min 1 ) (max. 300 min 1 ) Ø 1.54 mm Ø 3.3 mm Ø 3.5 mm Ø 4.2 mm Drill Extension FREE FREE FREE 11592

55 DENTAL RATIO 55 ILLUSTRATION BASIC PREPARATION TISSUE LEVEL Ø 3.3 mm TISSUE LEVEL Ø 4.1 mm TISSUE LEVEL Ø 4.8 mm BONE LEVEL INSTRUMENTS & TOOLS Countersink Tap Countersink Tap Countersink (max. 400 min 1 ) (max. 15 min 1 ) (max. 300 min 1 ) (max. 15 min 1 ) (max. 300 min 1 ) Ø 3.3 mm Ø 4.1 mm Ø 4.1 mm Ø 4.8 mm Ø 4.8 mm Parallel-Pin Depth Gauge Depth Gauge Adapter Screwdriver Ø 2.0/3.0 mm Ø 2.0 mm Ø 3.0 mm Holding Key FREE Torque ratchet INSTRUMENTS

56 56 DENTAL RATIO OKTAGON SURGICAL KIT PILOT DRILL TWIST DRILL Pilot drill Twist drill Twist drill Twist drill Twist drill Tap (max. 800 min 1 ) (max. 800 min 1 ) (max. 600 min 1 ) (max. 500 min 1 ) (max. 400 min 1 ) (max. 15 min 1 ) Ø 1.54 mm Ø 2.2 mm Ø 2.8 mm Ø 3.5 mm Ø 4.2 mm Ø 3.3 mm Round bur Twist drill Twist drill Twist drill Twist drill Tap (max. 800 min 1 ) (max. 800 min 1 ) (max. 600 min 1 ) (max. 500 min 1 ) (max. 400 min 1 ) (max. 15 min 1 ) Ø 2.2 mm Ø 2.2 mm Ø 2.8 mm Ø 3.5 mm Ø 4.2 mm Ø 3.3 mm INSTRUMENTS Parallel pins Tap Countersink Countersink Tap (max. 15 min 1 ) (max. 400 min 1 ) (max. 400 min 1 ) (max. 15 min 1 ) Ø 2.0/3.0 mm Ø 3.3 mm Ø 3.3 mm Ø 3.3 mm Ø 4.1 mm BL FREE Screwdriver Screwdriver Screwdriver Adapter FREE FREE FREE Holding key Torque ratchet 89048

57 DENTAL RATIO 57 ILLUSTRATION BASIC PREPARATION TISSUE LEVEL Ø 3.3 mm TISSUE LEVEL Ø 4.1 mm TISSUE LEVEL Ø 4.8 mm BONE LEVEL INSTRUMENTS & TOOLS TAPS DEPTH GAUGE WP TD Tap Tap Depth gauges Depth gauges Countersink Countersink (max. 15 min 1 ) (max. 15 min 1 ) - - (max. 300 min 1 ) (max. 300 min 1 ) Ø 4.1 mm Ø 4.8 mm Ø 2.2/2.8 mm Ø 3.5 mm Ø 4.2 mm Ø 3.5 mm Tap Tap Depth gauges FREE FREE FREE (max. 15 min 1 ) (max. 15 min 1 ) - Ø 4.1 mm Ø 4.8 mm Ø 4.2 mm Countersink Countersink Tap Countersink Countersink Drill extension (max. 300 min 1 ) (max. 300 min 1 ) (max. 15 min 1 ) (max. 300 min 1 ) (max. 300 min 1 ) Ø 4.1 mm Ø 4.1 mm Ø 4.8 mm Ø 4.8 mm Ø 4.8 mm Adapter Adapter Adapter Adapter Adapter FREE INSTRUMENTS

58 58 DENTAL RATIO MEISINGER PRESENTS 5 th ANNUAL HIGH ALTITUDE COMPREHENSIVE IMPLANT SYMPOSIUM (Formally High Altitude Bone Management Winter Camp) SAVE THE DATE Speakers: Vail Mountain Marriott January 28 th February 1 st, 2015 Vail, Colorado, USA Pre-Registration Going on NOW! CALL TODAY Dr. Michael Pikos Dr. Istvan Urban Dr. Sascha Jovanovic Dr. Daniel Cullum Dr. Brian Butler Dr. John Russo Dr. Dwayne Karateew Dr. Mitra Sadrameli Dr. Scott Ganz Dr. Robert Gellin Dr. Robert Miller Dr. Michael Block Hager & Meisinger GmbH Hansemannstr Neuss Germany Fax: [email protected]

59 DENTAL RATIO 59

60 60 DENTAL RATIO TORQUE VALUES AND SPEEDS Diameter Torque Speed Tools Implants Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm max. 35 Ncm max. 35 Ncm max. 35 Ncm max. 15 min -1 max. 15 min -1 max. 15 min -1 Handpiece adapter Finger wheel Torque ratchet Pilot drills Ø 1.54 mm Ø 1.8 mm - max. 600 min -1 max. 600 min -1 Handpiece adapter Round burs Ø 2.2 mm - max. 800 min -1 Handpiece adapter Twist drills Ø 2.0 mm Ø 2.2 mm Ø 2.8 mm Ø 3.5 mm Ø 4.2 mm - max. 800 min -1 max. 800 min -1 max. 600 min -1 max. 500 min -1 max. 400 min -1 Handpiece adapter Countersinks Ø 2.8 mm Ø 3.3 mm Ø 3.5 mm Ø 4.2 mm - max. 300 min -1 max. 300 min -1 max. 300 min -1 max. 300 min -1 Handpiece adapter Taps Ø 3.3 mm Ø 4.1 mm Ø 4.8 mm - max. 15 min -1 max. 15 min -1 max. 15 min -1 Handpiece adapter Finger wheel Torque ratchet Cover screws - Healing abutments - hand screwed - Screwdriver Torque ratchet Occlusal screw - max. 15 Ncm Abutments - max. 35 Ncm Screwdriver INFORMATION Ball Attachments - max. 35 Ncm ALLIGATOR/LOCATOR - max. 35 Ncm All values shown in this table are recommendations only. - Solid abutment driver Screwdriver

61 DENTAL RATIO 61 MATERIAL OKTAGON Pure titan grade 4 (3.7065) according ASTM F 67 (2013) Pure titan grade 5 ( Medical Grade) according ASTM F 136 (2013) Stainless steel (1.4197) according ASTM F 899b (2012) Stainless steel (1.4305) according DIN EN (2012) EPDM according FDA CFR Title 21 (2013) Polyoxymethylen (POM) according DIN EN ISO (2012) Polyetheretherketon 100 % (PEEK) Mouth-resistant plastic according DIN EN ISO (2012) Polysulfon (PSU) according DIN EN ISO (2012) Implants Cover screws Matrix Implant analogs Healing abutments Abutments (NO ALLIGATOR) Ball attachments Solid abutments Basic screws for Abutments ALLIGATORS incl. screw Occlusal screws Impression caps incl. screw Temporary copings Round bur, Twist drills, Profi l drills Taps Countersinks Emergency 24h Tools Handpiece adapter Screwdriver Adapter Parallel Pins Depth gauges Holding key Handpiece X-Ray reference spheres Torque ratchet O-Rings 70 shore red light 80 shore blue medium 90 shore black strong OKTAGON plastic copings, OKTAGON impression caps, interior trim of adapter ball attachments Temporary copings Multi function abutments Polyetheretherketon 100 % (PEEK) Mouth-resistant plastic according ISO (2013) Pure titan grade 4 (3.7065) according ASTM F 67 (2013) Polyetheretherketon 100 % (PEEK) Mouth-resistant plastic Novaloc Plastic parts Matrix Altus Plastic parts INFORMATION

62 62 DENTAL RATIO MANUFACTURER INFORMATION DENTAL RATIO products for dental implantology are of high quality and manufactured by the traditional German company Hager & Meisinger, a guarantee for high-grade medical products over the past 125 years. Hager & Meisinger assure the quality of their products by means of unlimited, uninterrupted monitoring of all production stages and the high quality of materials used as well as continuous monitoring of storage conditions. Certifi ed according to: ISO 9001 ISO Medizinprodukterichtlinie 93/42/EWG INFORMATION TISSUE LEVEL Implants and Abutments are approved for the U.S. market by 510(k).

63 DENTAL RATIO 63 DECLARATION OF CONFORMITY - MEISINGER COMPANY AND PROCESS EVALUATION Regular examination of product fi les by the notifi ed body Total recertifi cation of the QM system every 3 years by the notifi ed body Monitoring at least once per year by the notifi ed body More than 10 customer audits per year (sometimes several days) Annual internal audits in all relevant parts of the company Company department for regulatory affairs and product validation Regular domestic and international market observation and analysis INFORMATION

64 64 DENTAL RATIO QUALITY ASSURANCE THROUGHOUT THE MANUFACTURING PROCESS COURSE OF ACTION Unlimited, uninterrupted traceability of all production stages Invariably monitored production (no unmanned production) Continuous monitoring of storage conditions to ensure sterility VALIDATION All relevant processes (including cleaning) are validated Validated packaging (in cleanroom) and sterilisation Regular revalidation of all processes MEASUREMENT AND TESTING EQUIPMENT State-of-the-art, calibrated measuring and testing equipment used (partly computer-aided) Continuous monitoring of all test equipment within the certifi ed QM system TESTS IN-PROCESS Bioburden test for determining the microbial count Incoming goods test on the materials Surface analysis with a scanning electron microscope to test the surface topography (macro/micro cluster) Documented fi nal check including a 100% test of the most important functional features Documented X-ray spectral analysis of all manufacturing orders for production residues REGULAR Endotoxine test during cleaning validation Particle test during cleaning validation Cytotoxicity tests on packaged and sterilised products to confi rm biocompatibility Use of accredited partner companies for external laboratory tests FURTHER TECHNICAL DETAILS ABUTMENTS Passivated surface to reduce the risk of cold welding CONNECTOR All screw connectors standardised (ISO 10664) Torque is transferred fi rmly and adequate clamping is achieved between the screw and screwdriver INFORMATION IMPLANT SYSTEMS Matched tolerance concept between the individual components (e.g. the pitch of the implant corresponds to that of the tap) A sterile cover screw is included right in the sterile package Primary and secondary packaging ensure sterility Break-off point limits the maximum placement torque

65 DENTAL RATIO 65 MANUFACTURER CERTIFICATION Novaloc INFORMATION

66 66 DENTAL RATIO GUARANTEE GENERAL TERMS AND CONDITIONS INFORMATION The guarantee relates to the OKTAGON and HEXATEC implant systems of DRS International GmbH, hereinafter referred to as «DRS products and components». In addition to the statutory seller s warranties we provide at the discretion of the authorised persons from this guarantee a guarantee as follows: 1 SCOPE OF GUARANTEE In accordance with our guarantee promise DRS guarantees treating dentists, who after fi tted original DRS products and components in their patients under the following requirements and conditions, to replace these DRS products and components if the fi xation fails. This includes free delivery of the relevant DRS product and DRS components as well as compensation of the resulting additional treatment costs for replacement. The guarantee only covers the normal wear of DRS implants and abutments with a lifetime guarantee excluding instruments. It is a requirement of the guarantee that the patient did not have any contraindications specifi ed in the product description before, during or after implant placement. This obligation applies only for DRS products, which have been sold in Germany by DRS and inserted in Germany. The basis of the guarantee is always the individual guarantee certifi cate given by DRS with the delivery of a DRS product. The obligation is only for the benefi t of a treating doctor/dentist. Third parties, in particular patients or intermediate suppliers cannot derive any rights from this guarantee. The assignment of claims from the guarantee declaration is excluded. This guarantee programme is valid in the Federal Republic of Germany. 2 GUARANTEE CONDITIONS AND EXCLUSIONS DRS undertakes to replace only if the fi xation fails within lifetime guarantee, even though the following essential conditions have been fulfi lled by the treating dentist or doctor and/or patient: The patient must be carefully selected by the treating dentist and/or doctor, informed about the risks connected with the treatment and the obligations of the patient and asked to cooperate. The indications/contraindication must be carefully observed and documented. [More details are available in the respective product descriptions.] At the time of treatment the available instructions from DRS and recognised dental medical procedures must be observed and used accordingly before, during and after implant placement. The attending doctor is additionally responsible to regularly inform himself about the current status of the DRS products and components and their proper use. Continual good oral hygiene by the patient and checks at regular intervals must be ensured and documented. The product that is the subject of the claim must be returned in a sterilised state for the purpose of identifi cation. A completed guarantee form, the original guarantee certifi cate and the required additional documents for fulfi lling the conditions of the guarantee must be submitted together with the product. The guarantee does not apply: if DRS products have been modifi ed or if DRS products have been used in combination with products that did not originate from DRS; for special designs or specially fabricated or modifi ed products; if failure of an implant is triggered or induced by an accident, trauma or other damages caused by the patient or a third party; and in case the disadvantage bases on the fact the attending doctor does not have provable knowledge of implantation technology or does not have according qualifi cation in this special fi eld. 3 PROCEDURE FOR GUARANTEE CLAIMS If you think you meet the requirements for making a claim under guarantee, within the framework of the guarantee procedure you must submit a completed and signed guarantee form (including the required attachments therein) together with the original of the guarantee certifi cate to DRS within 1 year of becoming aware of the failure of the DRS products and/or components. All components must be returned sterilised. 4 TERMINATION DRS can change or end this warranty program in relation with any product or in relation with the entitlement of a specifi c treating Dentist or Doctor at any time. Already existing guaranties remain unchanged in their coverage as on purchasing date. 5 OTHER By participating in this guarantee programme and the purchase of products from DRS in connection with it, the treating dentist and/or doctor accepts the conditions defi ned herein. 6 VALIDATION These warranty terms are valid beginning from for all DRS products and/or components used after In case at the time of purchasing DRS products and/or components the then valid warranty terms were covering a larger scope of warranty terms as the actual valid terms, then these terms will apply. Issue August GENERAL/SCOPE 1.1. Our terms and conditions of delivery and payment apply for all business relationships with our customers and customers accept them as binding for them with placement of an order Conditions that deviate from the following and/or legal provisions in particular in the conditions of purchase of the customer are only binding for us, if they have been confi rmed in writing. This also applies for conditions, which are not stipulated in our terms and conditions for delivery and payment. The unconditional delivery of goods or receipt of payment does not mean any acceptance of deviating provisions by us All agreements, which are reached between us and the customer for the purpose of fulfi lling a contract, are laid down in writing in the contract and in these applicable terms and conditions. Changes, additions or cancellation of a contract or these terms and conditions are only effective with our written confi rmation. 2. OFFERS/OFFER DOCUMENTATION 2.1. Our offers are non-binding, if no other agreement has been made Illustrations, drawings, calculations and other product, application or project related documents remain our property and are subject to copyright, even if we place them at the customer s disposal: they may not be reproduced or made accessible to third parties without our express prior written consent. 3. PRICES/TERMS OF PAYMENT 3.1. Unless otherwise agreed, our prices apply ex-works. The costs for package, insurance, freight and VAT are not included and will be invoiced separately. The VAT will be shown separately on the invoice at the statutory rate on the invoice date. If we do not have any written request in advance by the recipient for uninsured delivery, all our shipments will be internationally insured at the expense of the recipient With customer-specifi c production we are entitled to an over or under delivery of 10% in relation to the order quantity and to invoice accordingly Unless otherwise agreed, the purchase price is net (without deductions) payable within 30 days from the date of the invoice. Deduction of a discount requires special written agreement Should the customer be in default of payment, we are entitled to charge default interest at 8% over the current valid base interest rate. We are entitled to charge reminder fees of to EUR for each reminder depending on the reminder stage If, after conclusion of the contract, a signifi cant deterioration of the customer s fi nancial circumstances is recognised which will endanger our claim for payment, provided there is an obligation for advance performance we are entitled to withhold our performance up and until payment is effected or security is provided to us for our payment claim. If, after a reasonable deadline set by us, the customer is neither willing to perform concurrently nor provide security we will be entitled to rescind the contract The customer shall only be entitled to offsetting rights, if they have been established by us as existing and due or enforced by law. The customer is only entitled to right of retention in so far as the counterclaim is based on the same contractual relationship. 4. DELIVERY, DELIVERY TIMES, PART DELIVERIES 4.1. Fulfi llment with our delivery obligations shall depend on punctual due fulfi lment of the obligations of the customer, in particular compliance with the agreed terms and conditions of payment. The right to raise an objection to a non-fulfi lled contract is reserved The delivery times agreed in writing begin on the day of our confi rmation but not before clarifi cation of all technical and commercial details as well as presentation of any authorisations required. Any modifi cations requested by the customer regarding the delivery of the contractual object within the period of delivery shall interrupt and extend the period of delivery accordingly Occurrence of unforeseen events, force majeure and non-delivery by our supplier for which we are not responsible entitle us to suspend the delivery for the duration of the disruption and a reasonable restarting period Partial deliveries are permitted to a reasonable extent.

67 DENTAL RATIO If we are in default in delivery, the customer is entitled to set us an extended deadline in writing. If the delivery goods have not been delivered by us within the period of the extended deadline, the customer is entitled to withdraw for those parts which were not delivered before expiry of the extension. We accept liability for provable damages that occur to the customer due to a delay for which we are at fault. Our liability is limited in such a way that the customer can claim 0.5 percent for each complete week of the delay but not more than 0.5 percent in total of the price for the part of the delivery that could not be put into proper operation. This does not imply a change in the burden of proof to the disadvantage of the customer. The statutory right of withdrawal of the customer remains unaffected If delivery is delayed for reasons for which the customer is responsible, the customer can be charged a storage fee for each month started at 0.5 percent in total of the price of the delivery items but not more than 5 percent. After a reasonable period of grace we are entitled to dispose of the delivery item otherwise and to supply the customer after a reasonably extended period. The contractual parties reserve the right to provide evidence of higher, lower or no storage costs. The statutory right to rescind the contract and claim compensation for damages remain unaffected If the customer is in default of acceptance or is in violation of other obligations to cooperate, we are entitled to claim compensation for damages incurred by us to this extent including any additional expenses. We reserve the right to make further claims. 5. DISPATCH, TRANSFER OF RISK Unless otherwise agreed, delivery will be made using the most favourable mode of shipment for us. All deliveries are made ex warehouse, at the expense and risk of the recipient, creditworthiness assumed. At the request of the customer and against payment of the additional costs we also arrange special modes of dispatch (e.g. express transport) or partial deliveries. 6. NOTIFICATION OF DEFECTS, GUARANTEE, LIABILITY 6.1. The customer must check the delivery with due care immediately after receipt and notify us in writing of any detectable defects immediately or at the latest within seven days after delivery (obvious defects) or discovery. Otherwise the delivery is deemed to have been accepted Guarantee claims shall not be valid with natural wear or damages, which were caused after transfer of risk as a result of incorrect or negligent handling, excessive loading, unsuitable equipment or due to special external infl uences, which have not been provided for in the contract. If the customer or a third party undertake improper modifi cations or repair work, guarantee claims are also not valid for these or consequences arising therefrom If there is a defect for which we are responsible, we have the choice of remedying the defect or making a replacement delivery If we refuse to remedy the defect or make a replacement delivery, if it is unacceptable for the customer or it fails, the customer has the choice of rescinding the contract or reducing the purchase price by a reasonable amount. This is provided, however, that there is no doubt that the notifi - cation of defect is justifi ed. If the notifi cation of the defect is unfounded, we are entitled to demand reimbursement of any expenses incurred by us from the customer Unless otherwise stated hereinafter, other or additional claims under guarantee, in particular claims of compensation for damages instead of performance are excluded. We therefore do not accept liability for damages, which were not caused to the delivery item itself; in particular we are not liable for a loss of profi t or other fi nancial losses of the customer The aforementioned disclaimer does not apply, if claims are made for damages based on grossly negligent or intentional breach of duty or claims are made for damages arising from injury to life, body or health or the customer makes a claim because of absence of a warranted product feature. With the latter claims for compensation can only be made in so far as the warranted feature covers the risk of consequential damage and the damage that occurred is based on its absence The guarantee period is for one year from the transfer of risk (Subparagraph 5) Claims for personal damages or damage to privately used items according to the German product liability law remain unaffected by the aforementioned provisions. 7. RETURNS 7.1. We generally only take back originally packaged and unused goods within six weeks after receipt of the goods and after our prior agreement. We charge 25% of the net value of the goods when accepting returned goods. If it has exceptionally been agreed to take goods back that are not in the original packaging, handling fees will be charged accordingly but not less than 20% of the net value of the goods Goods can only be taken back if the Lot number is given Special orders and designs as well as sterile goods are generally excluded from exchange. 8. RETENTION OF TITLE 8.1. Goods supplied remain our property (retention of title goods) until all our claims against the customer from the business relationship have been completely fulfi lled. 8.2 If the customer is in breach of obligations, in particular in default of payment, we are entitled to rescind the contract and recover the goods; the customer is obliged to return the goods. Withdrawal or exercising retention of the title does not require rescission by the supplier; in such actions or a seizure of the reserved goods by us shall not be deeded as rescission from the contract, unless we have expressly stated this to be the case The customer is entitled to resell the goods in the ordinary course of business; however, the customer now assigns to us all claims to the amount of the fi nal invoice value (including VAT), accrued from the resale against the purchasers or third parties, regardless of whether the goods supplied were resold before or after processing. The customer remains authorised to collect this claim even after assignment. Our authority to collect the claim ourselves remains unaffected by this. However, we undertake not to collect the claim as long as the customer fulfi ls the payment obligations from the proceeds collected, is not in default of payment and in particular when no application for the opening of insolvency proceedings has been made or payments have been suspended. If this is the case, however, we can demand that the customer informs us of the assigned receivables and the debtors, gives us all the information and relevant documents necessary to assert our rights and informs the debtors (third parties) of the assignment For the duration of the retention of title the customer may not pledge the retained goods or use them as security. The customer shall inform us without delay in the event of pledges, seizures or other dispositions or interference by third parties so that we can assert our rights. If the third party is not in a position to refund us the judicial or extrajudicial expenses of an action under Article 771 of the German Code of Civil Procedure (ZPO), the customer shall be liable for the loss we incur The customer is obligated to handle the object of sale with care; in particular the customer is obligated at their own expense to insure the object of sale adequately to cover the replacement value against damage caused by fi re, water or theft. If maintenance and inspection work are required, the customer must perform these in a timely fashion at their own expense The processing or modifi cation of the object of sale by the customer shall always be undertaken for us. If the object of sale is processed or inseparably mixed with other objects not belonging to us, then we shall acquire co-ownership of the new item in proportion to the ratio of the value of our item (fi nal invoice value including VAT) to the other objects at the time of processing or mixing. The same applies to items that have been processed or mixed as for the goods supplied subject to retention of title. If mixing is performed in such a way that the supplier s goods are regards as the main item, it is agreed that the customer transfers co-ownership proportionally. The customer shall store the sole property created for us. 9. EFFECTIVENESS OF THE CONTRACT If one or more of the provisions of these General Terms and Conditions of Delivery and Payment is or becomes inoperative, this does not affect the effi - cacy of the other provisions. Rather the ineffectiveness of the provision will be replaced by a provision that is as close as possible to the identifi able interests. 10. PLACE OF PERFORMANCE, PLACE OF JURISDICTION, APPLICABLE LAW Our business location shall be the place of performance for both parties for all rights and obligations resulting from our deliveries. We shall have the optional right to take legal action at the location of the customer German law shall apply exclusively. Use of the United Nations Convention on Contracts for the International Sale of Goods (CISG) is excluded. The data specifi ed by the customer will be stored and processed by electronic data processing provided it is permitted in accordance with the data protection act. Issue August 2014 INFORMATION

68 ASK SMART Thank you for your interest in DENTAL RATIO. We look forward to your questions and suggestions and we would be happy to assist you in any way. CUSTOMER ID Art. No ISSUE September 2014 DRS International GmbH Raiffeisenstr. 15 a Langenfeld Germany Phone Fax [email protected] Web Social Produced by Made in Germany C0044