Transcription

1 Page 1 of 18 Browse By Group: View All New Publications Supplements Amendments Errata Endorsements Reaffirmations Withdrawals Formal Interpretations Informs & Certification Notices Previous Reports Last updated: February 28, 2013 New Publications This section lists new standards, new editions (including adoptions), and special publications that have been recently published. Clicking on "View Detail" will display the scope of the document and other details available on CSA s Online store. Program Standard Title Date Posted Scope :13 technology Database languages SQL Part 1: Framework (SQL/Framework) (Adoption of ISO/IEC :2011) 2/27/2013 View Detail :13 technology - Radio frequency identification device conformance test methods - Part 2: Test methods for air interface communications below 135 khz (Adopted ISO/IEC :2012, first edition, ) 18052:13 technology - Telecommunications and information exchange between systems - Protocol for computer supported telecommunications applications (CSTA) phase III (Adopted ISO/IEC 18052:2011, second edition, )

2 Page 2 of :13 technology - Object management group - Common object request broker architecture (CORBA) - Part 2: Interoperability (Adopted ISO/IEC :2012, second edition, ) :13 technology - Software asset management - Part 1: Processes and tiered assessment of conformance (Adopted ISO/IEC :2012, second edition, ) 23271:13 technology - Common language infrastructure (CLI) (Adopted ISO/IEC 23271:2012, third edition, ) 26514:13 Systems and software engineering - Requirements for designers and developers of user documentation (Adopted ISO/IEC 26514:2008, first edition, ) 27006:13 technology - Security techniques - Requirements for bodies providing audit and certification of information security management systems (Adopted ISO/IEC 27006:2011, second edition, ) 27007:13 technology - Security techniques - Guidelines for information security management systems auditing (Adopted ISO/IEC 27007:2011, first edition, ) 27010:13 technology - Security techniques - security management for inter-sector and inter-organizational communications (Adopted ISO/IEC 27010:2012, first edition, ) 27031:13 technology - Security techniques - Guidelines for information and communication technology readiness for business continuity (Adopted ISO/IEC 27031:2011, first edition, ) 27035:13 technology - Security techniques - security incident management (Adopted ISO/IEC 27035:2011, first edition, ) :13 technology - Database languages - SQL - Part 11: and definition schemas (SQL/Schemata) (Adopted ISO/IEC :2011, third edition, ) :13 technology - Database languages - SQL - Part 14: XMLrelated specifications (SQL/XML) (Adopted ISO/IEC :2011, fourth edition, )

3 Page 3 of :13 technology - Database languages - SQL - Part 2: Foundation (SQL/Foundation) (Adopted ISO/IEC :2011, fourth edition, ) :13 technology - Database languages - SQL - Part 4: Persistent stored modules (SQL/PSM) (Adopted ISO/IEC :2011, fourth edition, ) TR :13 technology - Radio frequency identification device conformance test methods - Part 3: Test methods for air interface communications at 13,56 MHz (Adopted ISO/IEC TR :2011, second edition, ) TR :13 technology - Radio frequency identification device conformance test methods - Part 6: Test methods for air interface communications at 860 MHz to 960 MHz (Adopted ISO/IEC TR :2011, third edition, ) TR 23272:13 technology - Common language infrastructure (CLI) - derived from partition IV XML file (Adopted ISO/IEC TR 23272:2011, third edition, ) TR :13 Systems and software engineering - Life cycle management - Part 2: Guide to the application of ISO/IEC (System life cycle processes) (Adopted ISO/IEC TR :2011, first edition, ) TR 26927:13 technology - Telecommunications and information exchange between systems - Corporate telecommunication networks - Mobility for enterprise communications (Adopted ISO/IEC TR 26927:2011, second edition, ) TR 27008:13 technology - Security techniques - Guidelines for auditors on information security controls (Adopted ISO/IEC TR 27008:2011, first edition, ) Z Safe use of electrosurgical medical devices and systems in health care O Poplar plywood C Performances des lampes à incandescence à réflecteur C22.2 NO Metallic outlet boxes (Tri-national standard, with UL 514A and ANCE NMX- J-023/1)

4 Page 4 of 18 C Shielded and concentric neutral power cable for distribution utilities :13 technology - Service management - Part 1: Service management system requirements (Adopted ISO/IEC :2011, second edition, ) :13 Technologies de l'information - Gestion des services - Partie 1 : Exigences du système de management des services (norme ISO/CEI :2011 adoptée, deuxième édition, ) :13 technology - Service management - Part 2: Guidance on the application of service management systems (Adopted ISO/IEC :2012, second edition, ) :13 Technologies de l'information - Gestion des services - Partie 2 : Guide pour l'application des systèmes de management des services (norme ISO/CEI :2012 adoptée, deuxiéme édition, ) 15415:13 technology - Automatic identification and data capture techniques - Bar code symbol print quality test specification - Twodimensional symbols (Adopted ISO/IEC 15415:2011, second edition, ) :13 technology - Process assessment - Part 5: An exemplar software life cycle process assessment model (Adopted ISO/IEC :2012, second edition, ) :13 technology - Business operational view - Part 1: Operational aspects of open-edi for implementation (Adopted ISO/IEC :2011, second edition, ) 16262:13 technology - Programming languages, their environments and system software interfaces - ECMAScript language specification (Adopted ISO/IEC 16262:2011, third edition, ) 18031:13 technology - Security techniques - Random git generation (Adopted ISO/IEC 18031:2011, second edition, ) :13 technology - Security techniques - Encryption algorithms - Part 4: Stream ciphers (Adopted ISO/IEC :2011, second edition, ) :13 technology - Radio frequency identification device performance test methods - Part 1: Test methods for system

5 Page 5 of 18 performance (Adopted ISO/IEC :2011, first edition, ) :13 technology - Radio frequency identification device performance test methods - Part 2: Test methods for interrogator performance (Adopted ISO/IEC :2011, first edition, ) :13 technology - Radio frequency identification device performance test methods - Part 3: Test methods for tag performance (Adopted ISO/IEC :2007, first edition, ) C22.2 NO Positioning devices (Bi-national standard, with UL 1565) :13 technology - Abstract syntax notation one (ASN.1): object specification (Adopted ISO/IEC :2008, fourth edition, ) :13 technology - Abstract syntax notation one (ASN.1): Constraint specification (Adopted ISO/IEC :2008, fourth edition, ) :13 technology - Abstract syntax notation one (ASN.1): Parameterization of ASN.1 specifications (Adopted ISO/IEC :2008, fourth edition, ) :13 technology - ASN.1 encoding rules: Specification of basic encoding rules (BER), canonical encoding rules (CER) and distinguished encoding rules (DER) (Adopted ISO/IEC :2008, fourth edition, ) :13 technology - Open distributed processing - Reference model: Overview (Adopted ISO/IEC :1998, first edition, ) :13 Technologies de l'information - Traitement réparti ouvert - Modèle de référence : Aperçu général (norme ISO/CEI :1998 adoptée, première édition, ) TR :13 Systems and software engineering - Systems and software assurance - Part 1: Concepts and vocabulary (Adopted ISO/IEC TR :2010, first edition, ) :13 Systems and software engineering - Systems and software assurance - Part 2: Assurance case (Adopted ISO/IEC :2011, first edition, )

6 Page 6 of :13 Systems and software engineering - Systems and software assurance - Part 3: System integrity levels (Adopted ISO/IEC :2011, first edition, ) :13 technology - Database languages - SQL multimedia and application packages - Part 3: Spatial (Adopted ISO/IEC :2011, fourth edition, ) :13 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision (Adopted ISO/IEC :2011, second edition, ) :13 technology - Coding of audio-visual objects - Part 10: Advanced video coding (Adopted ISO/IEC :2012, seventh edition, ) :13 technology - Coding of audio-visual objects - Part 16: Animation framework extension (AFX) (Adopted ISO/IEC :2011, fourth edition, ) 14651:13 technology - International string ordering and comparison - Method for comparing character strings and description of the common template tailorable ordering (Adopted ISO/IEC 14651:2011, third edition, ) 14651:13 Technologies de l'information - Classement international et comparaison de chaînes de caractères - Méthode de comparaison de chaînes de caractères et description du modèle commun et adaptable d'ordre de classement (norme ISO/CEI 14651:2011 adoptée, troisième édition, ) 14882:13 technology - Programming languages - C++ (Adopted ISO/IEC 14882:2011, third edition, ) :13 nformation technology - Security techniques - Message authentication codes (MACs) - Part 2: Mechanisms using a dedicated hash-function (Adopted ISO/IEC :2011, second edition, ) 9899:13 technology - Programming languages - C (Adopted ISO/IEC 9899:2011, third edition, ) :13 technology - Keyboard layouts for text and office systems - Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section (Adopted ISO/IEC :2010, third edition, )

7 Page 7 of :13 Technologies de l'information - Disposition des claviers conçus pour la bureautique - Partie 3: Dispositions complémentaires de la zone alphanumérique du module alphanumérique (norme ISO/CEI :2010 adoptée, troisième édition, ) Energy F Détermination de la puissance requise des appareils de chauffage et de refroidissement résidentiels CAN/CSA-Z Tissues for assisted reproduction CAN/CSA-Z Tissus destinés à la reproduction assistée CAN/CSA-ISO/TR 13121:13 Nanotechnologies - Nanomaterial risk evaulation (Adopted ISO/TR 13121:2011, first edition, ) CAN/CSA-ISO/TR 13121:13 Nanotechnologies - Évaluation des risques associés aux nanomatériaux (norme ISO/TR 13121:2011 adoptée, première édition, ) W Safety in welding, cutting, and allied processes C22.2 NO Molded-case circuit breakers, molded-case switches and circuit-breaker enclosures (Tri-national standard, with UL 489 and NMX-J-266-ANCE-2013) 1/24/2013 View Detail Energy N Procédures d essais de qualification parasismique des structures, systèmes et composants de centrales nucléaires 1/24/2013 View Detail AAMA/WDMA/CSA 101/I.S.2/A Norme nord-américaine sur les fenêtres (NAFS)/Spécification relative aux fenêtres, aux portes et aux lanterneaux 1/24/2013 View Detail S Procédures d'essais de qualification parasismique des structures, systèmes et composants de centrales nucléaires 1/24/2013 View Detail Gas Equipment ANSI/CSA HGV Hydrogen gas vehicle fueling station compressor guidelines 1/24/2013 View Detail CAN/CSA-C22.2 NO :12 Photobiological safety of lamps and lamp systems (Adopted IEC 62471:2006, first edition, , with Canadian deviations) Sécurité photobiologique des lampes et des appareils utilisant des lampes (norme CEI 62471:2006 adoptée, première édition, , avec exigences propres au Canada) 1/24/2013 View Detail

8 Page 8 of 18 C22.2 NO Splicing wire connectors (Tri-national standard, with UL 486C and NXM-J- 548-ANCE) C22.2 NO Wire connectors (Tri-national standard, with UL 486A-486B and NMX-J-543- ANCE) 1/24/2013 View Detail 1/24/2013 View Detail Gas Equipment ANSI LC /CSA Press-connect metallic fittings for use in fuel gas distibution systems 1/24/2013 View Detail CAN/CSA-Z /BNQ /2013 Santé et sécurité psychologiques en milieu de travail Prévention, promotion et lignes directrices pour une mise en oeuvre par étapes 1/24/2013 CAN/CSA-Z /BNQ /2013 Psychological health and safety in the workplace Prevention, promotion, and guidance to staged implementation 1/24/2013 CAN/CSA-E :12 Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors (Adopted CEI/IEC :2002, 4th ed, , with amd 1:2006 and amd 2:2008, with Cdn dev) Appareils électrodomestiques et analogues - Sécurité - Partie 2-31: Règles particulières pour les hottes de cuisine et autres extracteurs de fumées cuisson (norme CEI/IEC :2002 adoptée, quatrième édition, , consolidée par l'amendement 1:2006 et l'amendement 2:2008, avec exigences propres au Canada) 1/10/2013 View Detail Energy PLUS CSA guide to Canadian wind turbine codes and standards 1/10/2013 View Detail CAN/CSA-Z Cells, tissues, and organs for transplantation: General requirements 1/10/2013 View Detail CAN/CSA-Z Cellules, tissus et organes destinés à la transplantation et à la reproduction assistée: Exigences générales 1/10/2013 View Detail CAN/CSA-Z Tissues for transplantation 1/10/2013 View Detail CAN/CSA-Z Tissus destinés à la transplantation 1/10/2013 View Detail CAN/CSA-Z Perfusable organs for transplantation 1/10/2013 View Detail CAN/CSA-Z Organes pleins destinés à la transplantation 1/10/2013 View Detail CAN/CSA-Z Ocular tissues for transplantation 1/10/2013 View Detail CAN/CSA-Z Tissus oculaires destinés à la transplantation 1/10/2013 View Detail CAN/CSA-Z Lymphohematopoietic cells for transplantation 1/10/2013 View Detail CAN/CSA-Z Cellules lymphohématopoïétiques destinées à la transplantation 1/10/2013 View Detail

9 Page 9 of 18 M Exigences relatives à la tenue au feu et aux propriétés antistatiques des courroies transporteuses Z Infection control during construction, renovation, and maintenance of health care facilities 1/10/2013 View Detail 1/10/2013 View Detail C22.2 NO Self-ballasted lamps and lamp adapters (Tri-national standard, with UL 1993 and NMX-J-578/1-ANCE) 12/14/2012 View Detail C22.2 NO Solid-state lighting controls 12/14/2012 View Detail Energy CAN/CSA-IEC :12 Wind turbines - Part 24: Lightning protection (Adopted IEC :2010, first edition, ) 12/14/2012 View Detail Z Primary sample collection facilities and medical laboratories - Patient safety and quality of care - Requirements for collecting, transporting, and storing samples 12/14/2012 View Detail ASME A /CSA B Plumbing supply fittings 12/14/2012 View Detail B Plumbing fittings 12/14/2012 View Detail Z Recul des scies à chaîne 12/14/2012 View Detail PLUS 4013 (2e éd. pub 2012) Guide technique: Élaboration, interprétation et utilisation de l information relative à l intensité, à la durée et à la fréquence (IDF) des chutes de pluie : guide à l intention des spécialistes canadiens en matière de ressources en eau 12/10/2012 View Detail CAN/CSA-C22.2 NO Appareils électrodomestiques et analogues - Sécurité - Partie 2-40 : Règles particulières pour les pompes à chaleur électriques, les climatiseurs et les déshumidificateurs norme trinationale avec NMX-J-521/2-40-ANCE 2013 et UL /10/2012 View Detail CAN/CSA-C22.2 NO Safety of household and similar electrical appliances - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers Tri-national standard with NMX-J-5212/40-ANCE-2013 and UL /10/2012 View Detail

10 Page 10 of 18 Supplements Supplements are issued periodically for some standards. This section lists those recently published. Program Standard Title Date Posted Scope No activity to report Amendments Amendments are issued periodically for some standards. This section lists those recently published. If not registered for the CSA Standards Update Service, Register Now Program Standard Title Date Posted Scope A:12 Amendment 1:2013 to :12, Identification cards Test methods Part 6: Proximity cards AMENDMENT 1: Additional PICC classes C22.2 NO , Update No. 1 Single pole locking-type separable connectors (Bi-national standard, with UL 1691) Revised Title page, copyright page, Contents, Preface, Clauses and , and Figures B1.2 and B1.3 New Clauses Deleted Clause /24/2013 C , Update No. 1 Shielded power cable for commercial and industrial applications (5 46 kv) Revised Clauses 2, 9.1.2, 9.1.3, 9.1.6, , , , , , 12.1, , , , , , , , , , , 13.8, , , , , , , , , , , , , and Tables 21 23, 46 48, and 50 New Deleted Clauses , , , , and Table 49 1/24/2013 Gas Equipment ANSI Z21.88a- 2012/CSA 2.33a-2012 Addenda 1 to ANSI Z /CSA , Vented gas fireplace heaters 1/24/2013 C22.2 NO (R2011) Rigid Types EB1 and DB2/ES2 PVC Conduit Revised Table 4 and Figure 3 1/10/2013 C22.2 NO Electrical Metallic Tubing - Steel (Tri-National Standard, with UL 797 and NMX-J-536-ANCE-2007) 1/10/2013

11 Page 11 of 18 Revised Title page, copyright page, Contents, and Preface New Clauses 7.8 and 7.9 and Annex F C22.2 NO (C2012) Tubes électriques métalliques en acier (norme trinationale avec UL 797 et NMX-J-536-ANCE-2007) Modification Page titre, page des droits d auteur et préface Ajout Articles 7.8 et 7.9 et l annexe F 1/10/2013 C22.2 NO (R2008), Update No. 6 Household Refrigerators and Freezers (Bi-National standard, with UL 250) Revised Title page, copyright page, Preface, Clauses , A, and 9.9.1, and Table 4.3 Deleted Foreword (CSA) and Foreword (UL) 12/14/2012 C22.2 No (R2011), Update No. 1 Low Voltage Transformers Part 1: General Requirements Revised Title page, copyright page, Preface, Clauses 3.2.1, 6.3.1, 6.4.3, 6.4.4, 8.4.1, 10.1, , 20.1, and 20.2, and Table 4 New Table 15 Deleted Clauses and /10/2012 C22.2 No (R2011), Update No. 1 Low Voltage Transformers Part 2: General Purpose Transformers Revised Title page, copyright page, Contents, Preface, Clauses 8.5.9, 14.3, 26.6, , , 32, and 37.1, and Tables 8 and 9 12/10/2012 C22.2 No (R2011), Update No. 1 Low Voltage Transformers Part 3: Class 2 and Class 3 Transformers Revised Title page, copyright page, Contents, Preface, Clauses 1.3, 29.2, and 34.1, and Table 7 New Clauses 11.6 and D1.4 and Figure D1.1 12/10/2012 Errata Errata are issued periodically for some standards. This section lists those recently published. If not registered for the CSA Standards Update Service, Register Now Program Standard Title Date Posted Scope :12 TC 1 Technical Corrigendum 1:2013 to :12 technology Security techniques Hash-functions Part 2: Hash-functions using an n-bit block cipher 2/22/ :04 TC 1 Technical Corrigendum 1:2013 to , technology Security techniques Hash-functions Part 3: Dedicated hash-functions 2/22/2013

12 Page 12 of 18 Gas Equipment CAN/CSA-P , Update No. 1 Testing method for measuring annual fireplace efficiency Revised Technical Committee and Subcommittee lists, Preface, and Clauses 1.2 and 1.3 1/24/2013 Gas Equipment CAN/CSA-P , Mise à jour no 1 Méthode d essai pour mesurer l efficacité annuelle des foyers Modification listes de Comité technique et Sous-comité, préface et articles 1.2 et 1.3 1/24/2013 Endorsements This section lists endorsed standards, which are standards that have been developed by another standards development organization and approved by the appropriate CSA Technical Committee for use in Canada. Endorsed standards are not sold by CSA. Program Standard Title Date Posted Scope No activity to report Reaffirmations The standards listed in this section have been reviewed to determine if they remain technically valid and have been reaffirmed as acceptable for use until the next edition is published or for a further five years (whichever comes first). Program Standard Title Date Posted Scope CAN/CSA-C50-08 Mineral insulating oil, electrical, for transformers and switches 2/28/2013 C22.2 No. 101-M1984 C22.2 No. 166-M1983 C22.2 No C22.2 No M1986 Electrically Heated Bedding Appliances for Household Use 2/28/2013 Stage and Studio Luminaires 2/28/2013 and Test of Picture Machines and Appliances 2/28/2013 Electric Furnaces in Combination With Solid Fuel-Fired Furnaces 2/28/2013 Gas Equipment CSA Standard for Gas-Fired Tubular and Low Intensity Infrared Heaters 2/28/2013 CAN/CSA-Z Decontamination of reusable medical devices 2/28/2013

13 Page 13 of 18 Environment CAN/CSA-Z Sustainable Forest Management for small woodlots and other small area forests 2/28/2013 Environment CAN/CSA-Z Sustainable Forest Management 2/28/2013 Gas Equipment CSA Service Regulators for Natural Gas 2/26/2013 C22.2 NO. 213-M1987 Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations 2/26/2013 C22.2 NO. 0.1-M1985 General Requirements for Double-Insulated Equipment 2/26/2013 CAN/CSA-C22.2 NO Medical Electrical Equipment - Part 1: General Requirements for Basic Safety and Essential Performance (Adoption of IEC :2005 ) 2/26/2013 C22.2 NO C22.2 NO. 39-M1987 C22.2 NO C22.2 NO C22.2 NO. 155-M1986 CAN/CSA-C22.2 NO. 223-M91 C22.2 NO C22.2 NO C22.2 NO. 222-M1986 CAN/CSA-C22.2 NO Busways 2/26/2013 Fuseholder Assemblies 2/26/2013 and Test of Industrial Heating Equipment 2/26/2013 Brooders and Incubators 2/26/2013 Electric Duct Heaters 2/26/2013 Power Supplies With Extra-Low-Voltage Class 2 Outputs 2/26/2013 Surface Raceway Systems 2/26/2013 Cellular Metal and Cellular Concrete Floor Raceways and Fittings 2/26/2013 Type FCC Under-Carpet Wiring System 2/26/2013 Nonmetallic Surface Raceways and Fittings 2/26/2013

14 Page 14 of 18 Gas Equipment C22.2 NO CAN/CSA-G CAN/CSA-P C22.2 NO Underfloor Raceways and Fittings 2/26/2013 Corrugated Steel Pipe Products 2/26/2013 Testing method for measuring efficiency and energy 2/25/2013 Temperature-Indicating and -Regulating Equipment 2/25/2013 C22.2 NO Household Refrigerators and Freezers (Bi-National standard with UL 250) 2/25/2013 C22.2 NO C22.2 NO. 221-M1986 Electrically Operated Toys 2/25/2013 Electrically Heated Hobby and Educational Type Kilns 2/25/2013 C Three-Phase Live-Front Pad-Mounted Distribution Transformers 2/25/2013 A Self-Adhering Polymer Modified Bituminous Sheet Used as Steep Roofing Underlayment for Ice Dam Protection 2/20/2013 W Certification of Welding Inspection Organizations 2/20/2013 W Certification of Welding Inspectors 2/20/2013 IEC ( ) Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes - Part 1: Definitions, Designations and General Requirements 2/20/2013 O Douglas Fir Plywood 2/6/2013 O Evaluation of Adhesives for Structural Wood Products (Limited Moisture Exposure) 2/6/2013

15 Page 15 of 18 CAN/CSA-ISO Petroleum and Natural Gas Industries - Fixed Concrete Offshore Structures (Adopted ISO 19903:2006 first edition, ) 2/6/2013 CAN/CSA-C22.2 No Hand-Held Motor-Operated Electric Tools - Safety - Part 2-8: Particular Requirements for Shears and Nibblers 1/31/2013 CAN/CSA-C22.2 No Hand-Held Motor-Operated Electric Tools - Safety - Part 2-6: Particular Requirements for Hammers 1/31/2013 CAN/CSA C22.2 No Hand-Held Motor-Operated Electric Tools - Safety - Part 2-1: Particular Requirements for Drills and Impact Drills 1/31/2013 CAN/CSA-C22.2 No Hand-Held Motor-Operated Electric Tools - Safety - Part 2-14: Particular Requirements for Planers 1/31/2013 CAN/CSA-C22.2 No Hand-Held Motor-Operated Electric Tools - Safety - Part 2-9: Particular Requirements for Tappers 1/31/2013 CAN/CSA-C22.2 No Held Motor-Operated Electric Tools - Safety - Part 2-11: Particular Requirements for Reciprocating Saws 1/31/2013 Energy Energy CAN/CSA-C CAN/CSA-C CAN/CSA-B CAN/CSA-B CAN/CSA-Z91-02 Wind Turbines - Part 2: Design Requirements for Small Wind Turbines 1/31/2013 Wind Turbines - Part 1: Design Requirements 1/31/2013 Self-propelled elevating work platforms 1/31/2013 Self-Propelled Boom-Supported Elevating Work Platforms 1/31/2013 Health and Safety Code for Suspended Equipment Operations 1/30/2013 Z Illumination Systems in Health Care Facilities 1/30/2013 CAN/CSA-C22.2 No Hand-Held Motor-Operated Electric Tools - Safety - Part 2-2: Particular Requirements for Screwdrivers and Impact Wrenches 1/29/2013 CAN/CSA-C22.2 No Hand-Held Motor-Operated Electric Tools - Safety - Part 2-4: Particular Requirements for Sanders and Polishers Other Than Disk Type 1/29/2013

16 Page 16 of 18 Energy CAN/CSA-IEC Electromagnetic Compatibility (EMC) - Part 6-2: Generic Standards - Immunity for Industrial Environments (Adopted IEC :2005, second edition, ) 1/23/2013 Energy CAN/CSA-IEC Electromagnetic Compatibility (EMC) - Part 4-5: Testing and Measurement Techniques - Surge Immunity Test (Adopted IEC :2005, second edition, ) 1/23/2013 Energy Energy Energy C C M1981 CAN3-C M85 Electromagnetic Interference Measuring Instrument - CISPR Type 1/23/2013 Electromagnetic Interference Measuring Instrument - ANSI Type 1/23/2013 Line Impedance Stabilization Network (LISN) 1/23/2013 C22.3 No Recommended Practices for Electrical Protection - Electric Contact Between Overhead Supply and Communication Lines 1/23/2013 CAN/CSA-C22.3 No Electrical Coordination 1/23/2013 CAN/CSA-C22.2 NO Requirements for Electrical Resistance Heating Cables and Heating Device Sets 1/23/2013 CSA/CSA-C22.2 No Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-040: Particular Requirements for Sterilizers and Washer-Disinfectors used to Treat Medical (Adopted CEI/IEC :2005, first edition, ) 1/8/2013 Energy N Interim Dry Storage of Irradiated Fuel 1/8/2013 CAN/CSA-D Motor Vehicles for the Transportation of Persons with Physical Disabilities; 12/19/2012 CAN/CSA-D Accessible Transit Buses 12/19/2012 D Accessible Over-the-Road Buses 12/19/2012 CAN/CSA-Z Mobility Aid Securement and Occupant Restraint (MASOR) Systems for Motor Vehicles 12/19/2012 Energy CAN/CSA-C Performance of Highmast Luminaires for Roadway Lighting 12/12/2012

17 Page 17 of 18 Gas Equipment Energy ANSI Z /CSA C22.2 No CAN/CSA-G12-92 CAN/CSA-C CAN/CSA-A14-07 Gas-Fired Outdoor Infrared Patio Heaters 12/7/2012 Extra-Low-Voltage Landscape Lighting Systems 12/7/2012 Zinc-Coated Steel Wire Strand 12/5/2012 Performance of Dehumidifiers 12/5/2012 Concrete Poles 12/5/2012 O Procedure for Certification of Pressure-Treated Wood for Use in Preserved Wood Foundations 12/5/2012 Withdrawals The standards listed in this section have been withdrawn. Most withdrawn standards are available from our archived collection. Program Standard Title Date Posted Scope CAN/CSA-Z (R2008) Transportable Mobility Aids 12/19/2012 Formal Interpretations This section lists questions that individuals have submitted about a particular standard. Each question has been reviewed and answered by the appropriate committee. View Detail Informs & Certification Notices This section lists notices that are published by Certification and Testing. An Informs Notice contains information only. A Certification Notice announces changes that may affect product certification. Please allow time for page to load. View Detail

18 Page 18 of 18 Members Only Area Standards Online Store & Catalogue Product Highlights CSA Learning Centre Membership Consumer About CSA Contact Us News & Events Links Careers Legal Privacy 2012 Canadian Standards Association. All rights reserved.