Price List for Makeready Supplies
|
|
|
- Ambrose Harris
- 8 years ago
- Views:
Transcription
1 Price List for Makeready Supplies Section 1 Makeready Boards and Materials... pg 2 Section 2 Pressroom Supplies... pg 6 Section 3 Machinery Supplies... pg 8
2 Section 1 Makeready Boards and Materials IS-PRF0438 IS-PRF0487 IS-PRF0400 IS-PRF0436 IS-PRF0437 IS-PRF0490 IS-PRF0448 IR-CNT7550 IR-CNT7560 IR-CNT7570 IR-CNT7572 IR-CNT7575 IR-CNT7580 IR-CNT7585 Cover Film 24" x 100' x.005" (609.6mm x 30.48m x.127mm) Die Foam 24" x 36" x ¼" (609.6mm x 914.4mm x 6.35mm) DuploFLEX FOL " x ' x.004" (310mm x 4.5m x 10mm) Dura Cover 24" x 100' x.0055" (609.6mm x 30.48m x.14mm) Embossing Film, 12 micron 24" x 1,000' (609.6mm x 304.8m) Embossing Film, 12 micron 24" x 2,000' (609.6mm x 609.6m) Engraver s Board 14" x 22" x.070" (355.6mm x 558.8mm x 1.778mm) 24" x 36" x.015" (609.6mm x 914.4mm x 0.381mm) 24" x 24" x.030" (609.6mm x 609.6mm x 0.762mm) 24" x 24" x.060" (609.6mm x 609.6mm x 1.524mm) 28" x 40" x.015" (711.2mm x 1016mm x 0.762mm) 28" x 40" x.030" (711.2mm x 1016mm x 0.762mm) 28" x 40" x.060" (711.2mm x 1016mm x 1.524mm) 48" x 36" x.030" (1219mm x 914.4mm x 0.762mm) $79.45 $3.00 $35.84 $69.80 $50.00 $ $2.50 $25.96 $22.25 $34.43 $52.95 $46.12 $62.65 $55.28 page 2
3 Section 1 Makeready Boards and Materials, continued IS-PRF0439 IS-PRF0428 IS-PRF0430 IS-PRF0431 IS-PRF0432 IS-PRF0435 IS-PRF0443 IS-PRF0444 IS-PRF0445 IS-PRF0665 IS-PRF0449 IS-PRF0440 IS-PRF0470 Greyboard 12" x 24" x.030" (304.8mm x 609.6mm x 0.762mm) Heat Die-Mount Tape 3" x 180' x.0025" (76.2mm x m x.064mm) Makeready Tape ½" x 500' x.006" (12.7mm x 152.4m x.1524mm) Makeready Tape ½" x 500' x.0035" (12.7mm x 152.4m x.0889mm) Makeready Tape ½" x 500' x.0015" (12.7mm x 152.4m x.0381mm) Insulating Tape 1" x 180' (25.4mm x m) Makeready Float Sheets - set of 25 sheets 8 ½" x 11" x.0047" (215.9mm x 279.4mm x.12mm) Makeready Float Sheets - set of 25 sheets 14" x 23" x.0047" (355.6mm x 584.2mm x.12mm) Makeready Float Sheets - set of 25 sheets 28" x 40" x.0047" (711.2mm x 1016mm x.12mm) Makeready Float Sheets - set of 25 sheets 10 ¼" x 11" x.0047" (260.3mm x 279.4mm x.12mm) Mole Skin 48" x 36" x.026" (1.45m x 1.22m x.66mm) Phenolic Board 24" x 24" x.030" (609.6mm x 609.6mm x.762mm) Phenolic Board 29" x 40.5" x.030" (736.6mm x mm x.762mm) $6.69 $79.45 $8.60 $8.25 $11.15 $7.25 $7.45 $22.30 $66.85 $10.00 $15.40 $12.75 $33.92 page 3
4 Section 1 Makeready Boards and Materials, continued IS-PRF0670 IS-PRF0674 IS-PRF0675 IS-PRF0676 IS-PRF0677 IS-PRF0442 IS-PRF0481 IS-PRF0650 IS-PRF0652 IS-PRF0654 IS-PRF0656 IS-PRF0492 IS-PRF ¼" x 11" x.004" (260.3mm x 279.4mm x.102mm) 8 ½" x 16 ½" x.010" (215.9mm x 419.1mm x.254mm) 9.875" x " x.010" (250.8mm x 365.1mm x.254mm) 8 ½" x 16 ½" x.014" (215.9mm x 419.1mm x.355mm) 9.875" x " x.014" (250.8mm x 360.3mm x.355mm) Polyurethane 24" x 24" x.060" (609.6mm x 609.6mm x 1.524mm) Prago-Therm 8" x 16" (203.2mm x 406.4mm) Press Pack - 10 sheets per package 28" x 40" x.002" (711.2mm x 1016mm x.051mm) Press Pack - 10 sheets per package 28" x 40" x.004" (711.2mm x 1016mm x.102mm) Press Pack - 10 sheets per package 28" x 40" x.006" (711.2mm x 1016mm x.152mm) Press Pack - 10 sheets per package 28" x 40" x.008" (711.2mm x 1016mm x.203mm) Redboard 12" x 24" x.060" (304.8mm x 609.6mm x 1.524mm) Redboard 12" x 24" x.030" (304.8mm x 609.6mm x.762mm) $2.40 $6.40 $6.40 $6.40 $6.40 $70.71 $35.00 $8.20 $11.90 $17.60 $21.30 $10.83 $7.25 page 4
5 Section 1 Makeready Boards and Materials, continued IS-PRF0447 IS-PRF0480 IS-PRF0482 IS-PRF0483 IS-PRF0484 IS-PRF0421 IS-PRF0434 IS-PRF0433 IS-PRF0441 Release Film, 12 micron 24" x 100' (609.6mm x 30.48m) Rubber Skin 9.843" x " x.025" (250mm x 360.3mm x.64mm) Rubber Skin 12" x 35" x.025" (304.8mm x 889mm x.64mm) Rubber Skin 11" x " x.025" (279.4mm x 360.3mm x.64mm) Rubber Skin 8 ½" x 16 ½" x.025" (215.9mm x 419.1mm x.64mm) Silver Cover Film 20" x 27" (508mm x 685.8mm) Tough Film 36" x 12" x.015" (914.4mm x 304.8mm x 0.381mm) Yellowboard 25.5" x 40" x.030" (711.2mm x 1016mm x 0.762mm) Yellowboard 19" x 24" x.030" (482.6mm x 609.6mm x 0.762mm) $15.00 $44.50 $ $48.40 $40.00 $7.00 $14.95 $12.65 $4.80 page 5
6 Section 2 Pressroom Supplies IS-PRO1014 IS-PRO4041 IS-PRO9404 IS-PRO1048 IS-PRO2510 IS-PRO2509 IS-PRO2207 IS-PRO4040 IS-PRF0485 IS-PRO9445 IS-PRO3447 IS-ART1521 IS-ART1522 Brass Bristle Brush Block Style 916 Counter Pin Extractors Denim Aprons Nylon Bristle Brush Block Style 916 OptiVISOR, DA times magnification Replacement Lens for OptiVISOR Plastic 10x Eye Loupe Plastic Counter Pins, Regular 250 per box Pyrometer Safety Glasses Spill Socks 8' long x 3" diameter (2.438m x 76.2mm) Blades, flat tip 100 blades per box Blades, pointed 100 blades per box $12.00 $6.00 $20.00 $12.00 $40.00 $22.00 $38.00 $16.00 (per box) $ $7.25 $33.00 (per sock) $41.75 (per box) $41.75 (per box) page 6
7 Section 2 Pressroom Supplies, continued IS-PRO5001 IS-PRO5003 IS-PRO5005 Paper Cores 1" x 27" (25.4mm x 685.8mm) Paper Cores 3" x 54" (76.2mm x mm) Paper Cores ½" x 27" (12.7mm x 685.8mm) $0.45 $3.00 $0.40 page 7
8 Section 3 Machinery Supplies IS-PRF0486 IS-PRF0450 IS-PRF0452 IS-PRF0550 IS-PRF0555 IS-PRF0458 Bearer Blocks set of 4 brass bearer blocks Bunter Post 0.230" thickness (5.842mm) Bunter Post Wrench, Large Bunter Post 0.200" thickness (5.08mm) Bunter Post Wrench, Small Toggle Bits $25.00 $14.50 $13.16 $14.50 $13.16 $1.50 IS-PRF0570 Toggle Hook #0 IS-PRF0571 Toggle Hook #1 IS-PRF0572 Toggle Hook #2 IS-PRF0573 Toggle Hook #3 IS-PRF0574 Toggle Hook #4 IS-PRF0575 Toggle Hook #3E IS-PRF0454 Toggle Keys $19.05 page 8
9 Section 3 Machinery Supplies, continued IS-PRO8158 IS-PRO8160 IS-PRO8161 IS-PRO8150 IS-MAC5214 Cutter Protective Sleeve Cutter Chuck 1" w/ teeth Cutter Chuck ½" w/ teeth Cutter Blade 3" Foil Flange $57.00 $ $ $ $ Core Adapter call for price page 9
AVIATION MAINTENANCE TECHNOLOGY REQUIRED TOOL LIST
AVIATION MAINTENANCE TECHNOLOGY REQUIRED TOOL LIST REVISED 5/14/13 (per AVM Student Handbook) Tools are not needed the first day of class but are required by the second week of the semester. TOOLS Under
These are the plans to build your own Energy House.
The experiments that you can do with the Energy House can be found at Design Coalition s website at www.designcoalition.org These are the plans to build your own Energy House. You build the Energy House
I N T E R N A L S E C U R I T Y
I N T E R N A L S E C U R I T Y E Q U I P M E N T Founded by Walter E. Wisbey in the late 1940ʼs as specialists in surgical instrument repair, the company rapidly developed a comprehensive engineering
IMAGINE trying to paint a picture without a canvas or a
Identifying Floral Design Tools and Supplies IMAGINE trying to paint a picture without a canvas or a brush. Even with a wide variety of paints with which to work, you could not create the artwork without
Build a Junior Solar Sprint Model Car Kit Materials: 1 PITSCO Ray Catcher Sprint Kit or Solar Made Junior Solar Sprint Kit 1 White Sheet of Plastic
Build a Junior Solar Sprint Model Car Kit Materials: 1 PITSCO Ray Catcher Sprint Kit or Solar Made Junior Solar Sprint Kit 1 White Sheet of Plastic Coated Paper 2 Balsa Sheets (10-1/2 x4 x3/16 ) 2 Alligator
2S-Series Sub-Miniature Toggle Switches
Carling Technologies S-Series Sub-Miniature Toggle Switch SS-Series Sealed Sub-Miniature Toggle Switch SM-Series Sealed Surface Mount Sub-Miniature Toggle Switch S-Series Ordering Scheme Specifications
Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors
Installation Manual Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors SW602206 Rev B Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...
Laparoscopic Instruments
HOW TO TEST & INSPECT Laparoscopic Instruments are used to perform minimally invasive surgical procedures. Advantages of Laparoscopic Surgery Smaller incision, resulting in shortened recovery time, reduced
CYGNAL Application Note
AN014 - Hand Soldering Tutorial for Fine Pitch QFP Devices Scope CYGNAL Application Note This document is intended to help designers create their initial prototype systems using Cygnal's TQFP and LQFP
Installation Guide. Bath and Wall Surrounds SERIES 7104 1021861-2-B
Installation Guide and Wall Surrounds SERIES 7104 1021861-2-B Thank You For Choosing Sterling We appreciate your commitment to Sterling value. Please take a few minutes to review this manual before you
AN114. Scope. Safety. Materials H AND SOLDERING TUTORIAL FOR FINE PITCH QFP DEVICES. Optional. Required. 5. Solder flux - liquid type in dispenser
H AND SOLDERING TUTORIAL FOR FINE PITCH QFP DEVICES Scope This document is intended to help designers create their initial prototype systems using Silicon Lab's TQFP and LQFP devices where surface mount
Low Cost Heliostat Assembly Kit for High Schools
Low Cost Heliostat Assembly Kit for High Schools Phillip Daniel Supervisor: Rockwell International Assistant Professor Alexander Mitsos Department of Mechanical Engineering Massachusetts Institute of Technology
Sliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
Micro-CT for SEM Non-destructive Measurement and Volume Visualization of Specimens Internal Microstructure in SEM Micro-CT Innovation with Integrity
Micro-CT for SEM Non-destructive Measurement and Volume Visualization of Specimens Internal Microstructure in SEM Innovation with Integrity Micro-CT 3D Microscopy Using Micro-CT for SEM Micro-CT for SEM
Installation instruction CASAFLEX - Connecting piece DN 100
1 CASAFLEX - 11 10 114,3 x 4,5 3 5 2 4 1 7 6 8 12 9 Do not begin work until you have read the installation instruction carefully. 1 internal backing sleeve 2 graphite packing 3 connecting piece 4 thrust
Pilkington Reflite Handling and Processing Guidelines Solar Control
Pilkington Reflite Handling and Processing Guidelines Solar Control Pilkington Reflite 1. Product description Pilkington Reflite is a hard, on-line coated, solar control glass, available in a range of
Athena is the name given to our assortment of electronic tapes. products of the very highest quality. These tapes both conduct and
Electric Athena. Athena is the name given to our assortment of electronic tapes products of the very highest quality. These tapes both conduct and insulate against electricity, in addition to warmth and
2. AIRCONDITIONING AND REFRIGERATION
2. AIRCONDITIONING AND REFRIGERATION 1. INTRODUCTION Air Conditioning and Refrigeration is an important area where in lot of self-employment opportunities are available. Now a day there is hardly a house
SunMor SM-V30 Solar Water Heater Installation Manual
SunMor SM-V30 Solar Water Heater Installation Manual Rev. 1.02 Congratulations on the purchase of your new SunMor SM-V30 from Nature s Comfort LLC! You must read this entire instruction manual before beginning
How to choose the very best connectors for your speaker cables and enjoy superb sound from your music system
Not all speaker plugs sound the same How to choose the very best connectors for your speaker cables and enjoy superb sound from your music system By Graham Nalty MA Not all speaker plugs sound the same
Sample Lesson How to Brush Your Teeth
6 55 Sample Lesson How to Brush Your Teeth 6 56 How to Brush Your Teeth In a prior lesson you have learned about human body and hair hygiene practices. Now we will look at special care given to the teeth
Product Information. Tel: 905.696.9900 x2426 or x2443 Fax: 905.696.9300 Email: sales@alusion.com
Tel: 905.696.9900 x2426 or x2443 Fax: 905.696.9300 Email: sales@alusion.com Product Information 6320-2 Danville Rd. Mississauga, Ontario Canada L5T 2L7 TABLE OF CONTENTS Sheet Product Alusion Sheet Products.......................................................
!!!!!! !!! Decra Plus DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 DPSW016 DPSW020 DPSW021 DPSW024 DPSW030 DPSW031 DPSW035 DPSW030 DPSW031 DPSW035
Decra Plus Drawing no DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 Description Shown In Decra Brochure Most Commonly Used Detail t~êã=oççñ=b~îéë=aéí~áä=b~îéë=lîéêü~åö=táíü=fåëìä~íéç=c~ëåá~=~åç=pçññáí
Permanent Magnetic Generator Construction Manual
Permanent Magnetic Generator Construction Manual http://hojomotor.com Our Team Doing an On-site Assembly in Peru http://hojomotor.com Section 1) Introduction This manual describes how to build a 'permanent
Installation Instructions HighRock 4x4 TM
Installation Instructions HighRock 4x4 TM Slider Step Vehicle Application: Jeep YJ and TJ Wrangler 1986 2006 Part Number: 49312 www.bestop.com - We re here to help! Visit our web site and click on Ask
FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Tools and Glue. Required Materials
Do not try to make your ornithopter using "household materials". If you want it to fly, you have to build it right. FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Wingspan: 16 inches Weight: 1/4 ounce The Ornithopter
Moving Supplies & Packages
Moving Supplies & Packages Description Case/ Ea. Price Bndl. Price MOVING SUPPLIES Small Moving Box (. cf) 6 x " x " 0.89 Medium Box (.0 cf) 8 x 8" x 6".98.89 Large Box (4. cf) 8 x 8" x 4" Extra Large
Pad printing accessories
Pad printing accessories Accessories for inks & ink cups Screened films & plastic plate manufacturing Cleaning Miscellaneous Inhalt Summary Page Adhesive spray KIWO FIX 12 All-purpose gloves 9 All-purpose
Technical data. Assembly: Introduction. Before starting construction. Equipment needed. Glider or Electro Glider?
Palio pro S2084 Technical data Wing span: Lenght: Weight: Wing area: Wing loading: El. Motor/ no. of cells: Controls: Introduction 2150 mm 1150 mm 1120 g 1860 g 42 dm2 27 g/dm2 44 g/dm2 600 / 7-8 cells
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL Please read these instructions carefully and completely before attempting to install Hale Pet Doors; they will guide you through the steps
A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS
A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS 1. Check your gauges before you take them out of the packaging to make sure they are at 0 (zero) psi for both boost and fuel pressure.
2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure
2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts
RZ 100 Installation Instructions:
RZ 100 Installation Instructions: TO AVOID CONFUSION DURING INSTALLATION follow steps 1 through 5 listed below Step 1. Remove pages 2 through 7 from book Step 2. Remove your router install pages Step 3.
Product Specification
Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should
THE HP LASERJET 5200 TONER CARTRIDGE
THE HP LASERJET 5200 TONER CARTRIDGE DOC# 0344 By Mike Josiah and the Technical Staff at Summit Technologies HP LASERJET 5200 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS Page 1 Remanufacturing the HP
Thickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
Recommended Procedures for Use of YSI Water Quality Monitoring Instruments during Oil Spills
Recommended Procedures for Use of YSI Water Quality Monitoring Instruments during Oil Spills Overview: This is a guidance document that is intended for users of YSI 6-Series sondes and handheld instruments
E4RS/JS/JR II/III Parts List
E4RS/JS/JR II/III Parts List Copyright: Lionel Troyon / HRC Distribution www.teammagicrc.net 03.12.2015 KF2201 Front Spool Set with Aluminium Outdrives REPLACED BY TM507213 KF2201 1 Front Spool Joints
Promotional Products. ZMO778803 Silicon Smart Phone Cover. Other Available Colours. Information. ZKC714116 Car Sun Visor.
ZMO778803 Silicon Smart Phone Cover 250 FROM: $4.25 * Product Description: Colourful silicone case to protect your Iphone. Sizes: 12 cm x 6 cm x 1 cm ZKC714116 Car Sun Visor 250 FROM: $8.35 * Product Description:
Provided by TryEngineering - www.tryengineering.org
Provided by TryEngineering - Lesson Focus Lesson focuses on the engineering behind keeping food and other items cool. Students work in teams to develop a system to make an insulated liquid container that
WARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY CAUTION: INSTALLATION LOCATION:
Revision Level: 01 Revision Date: 07/07/2011 Please read all instructions carefully to help ensure a correct and SAFE installation of your Second Wind Ultraviolet Germicidal Air Purifier. Failure to do
Electronics and Soldering Notes
Electronics and Soldering Notes The Tools You ll Need While there are literally one hundred tools for soldering, testing, and fixing electronic circuits, you only need a few to make robot. These tools
$117.99 $31.99 $39.99 $23.99. Things to consider when buying your next socket set:
D004006 47 Piece 6 Point Standard/Deep SAE/Metric Socket Set SAE Standard: 3/16"-9/16" SAE Deep: 3/16"-9/16" Metric Standard: 4-14 mm Metric Deep: 4-12 mm 2", 6" Extensions Hand Driver U-Joint 45 Tooth
413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
PROTECH ELECTRICAL CONNECTORS AND CABLE TIES
INDEX ALLIGATOR CLIPS... 7-7 compressor lead sets... 7-7 CONNECTORS BUTT... 7-3 closed... 7-3 ELECTRICAL... 7-2 terminal adapters... 7-2 QUICK CONNECTS... 7-5 7-6 TWIST-ON WIRE... 7-2 HEAT SHRINK TUBING
Electrostatic Printing Assist
Advancements in ESA in Rotogravure By Joseph K. Steingraeber Electrostatic Printing Assist (ESA) has contributed more to improve the quality of rotogravure printing than any other innovation. ESA systems
Plumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs
INNOVATIVE DRILLING & TOOL SOLUTIONS www.armeg.co.uk Plumbing The convenient, compact and clever solutions to your wrench and hand tool needs Complete Heating Installation with PHI Wrench Set Easy Tap
National Optical & Scientific Instrument Inc. 11113 Landmark 35 Drive San Antonio, Texas 78233 Phone (210) 590-9010 Fax (210) 590-1104
National Optical & Scientific Instrument Inc. 11113 Landmark 35 Drive San Antonio, Texas 78233 Phone (210) 590-9010 Fax (210) 590-1104 INSTRUCTIONS FOR STEREOSCOPIC MICROSCOPES MODEL NUMBERS 400 400TL
- Optional Polyurethane for top coat. - Weights (bricks or heavy stones)
How to Build & Race a Cardboard Boat A Photo Journal The Supplies - Corrugated Cardboard - Quick Dry Caulking (latex) - Elmer s Wood Glue - Paint & Brush/Roller (Outdoor Paint) - Duct Tape - Optional Polyurethane
Permanent Stainless Steel Anchorage Point for Concrete, Solid Masonry and Steel Constructions
ABS-Lock X / X - SR Permanent Stainless Steel Anchorage Point for Concrete, Solid Masonry and Steel Constructions The ABS-Lock X system was developed to provide both a secure single anchorage point for
Fiberglas, Exterior Wall Thermal Insulation
PROJECT ENGINEER RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in conjunction with good construction practice and professional judgment.
USB TRADING & STOCK PRICELIST
USB & PRICELIST Rotate Basic USB Rotate Basic USB 1Z41000 1Z41001 1Z41002 1Z41003 1Z41004 Black White Blue Red 1234 1Z41005 1Z41007 1Z41007 1Z41008 1Z41009 Bright Red Lime Orange Yellow 1Z41010 1Z41012
Teaming With Insects Materials List
Level 1 Chapter 1 Activity 1 Activity 2 Activity 6 Chapter 2 Activity 8 Chapter 4 Activity 11 Activity 12 Insect pictures Drawing paper Rubber bands Pipe cleaners Construction paper Milk jug cap or bottle
Acrosoma 3D panels for road and wind
Acrosoma 3D panels for road and wind ir ir Jan Jan Verhaeghe, CEO CEO Composittrailer Composittrailer Nordic Nordic Composite Days Days 1 Aalborg, August 25th 2008 Aalborg, August 25th 2008 Structural
1Z41005 1Z41007 1Z41007 1Z41008 1Z41009 Bright Red Lime Orange Yellow. From. 2 days
Rotate Basic USB Rotate Basic USB 1Z41000 1Z41001 1Z41002 1Z41003 1Z41004 Black White Blue Red 1234 1Z41005 1Z41007 1Z41007 1Z41008 1Z41009 Bright Red Lime Orange Yellow 1Z41010 1Z41012 1Z41012 1Z41013
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com. Electrical Industrial and Fleet Solutions
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Electrical Industrial and Fleet Solutions Lawson's ELECTRICAL SOLUTIONS Electrical Wire Low voltage (60V) and high voltage (300/600V)
Porcelain Vessel Sink Installation
Porcelain Vessel Sink Installation Required Supplies & Tools A. One of these two type of Faucets Threaded Faucet Nut & Bolt Faucet B. Under Counter Supply/Drain Lines & Shutoff Valves Water Supply Lines
BILLET HEADLAMP WITH SHORT/TALL MOUNTS
-J099 REV. 00-0- BILLET HEADLAMP WITH SHORT/TALL MOUNTS GENERAL Kit Number 9-0, 9-0 Models Kit 9-0 is a -/ inch headlamp and kit 9-0 is a -/ inch headlamp. Both kits will fit the models listed in Table.
36T Series Snap-Action Temperature Controls
36T Series Snap-Action Temperature Controls Snap-Action Temperature Control The 36T series of 1/2 bimetal temperature controls from Therm-O-Disc offers proven reliability in a compact, versatile, cost-effective
..." by A Elmroth and P Levin.
ABSTRACT This survey describes how external walls and joints are constructed in practice. The paper gives you an opportunity to compare how successful the implementation of airtightness has been in Sweden
Installation Instructions
Installation Instructions 1. Position the unit onto bridging packers. These keep the unit away from any water sitting inside the frame. 2. Centralise the unit within the frame and pack the edges with appropriate
Formwork Direct International Ltd Phone No +44 (0151) 532 0179 Fax no +44 (0151) 523 8330 E-Mail: sales@formworkdirect.co.
Tie Rod & Formwork s well as containing our comprehensive range of Formwork Tie Sytems; this section also covers our market leading Rapidobat Column Former. Exclusive also to Formwork Direct are innovations
Installation guide Nordic mixer taps. Before installing read this guide first
Installation guide Nordic mixer taps Before installing read this guide first Introduction Installation, maintenance and warranty The Nordic Twintaps are our latest innovation for your kitchen a boiling-water
DRAIN CLEANING MACHINES
CLEANER, PIPE CLEANING, For blockages in bathroom, toilet & laundry Drain Cleaner H 75 With Bulb Head:DH75B ø20~75mm Manual Plastic wire drum for easy maintenance after use. High quality wire for smooth
This topic explores the key concepts of magnetism as they relate to: the phenomenon of magnetism magnetic forces and fields a theory of magnetism.
Magnetism Introduction This topic explores the key concepts of magnetism as they relate to: the phenomenon of magnetism magnetic forces and fields a theory of magnetism. Key concepts of magnetism The activities
INSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
Product teardown. Dr. Tarek A. Tutunji
Product teardown Dr. Tarek A. Tutunji Product Teardown The process of taking apart a product to understand how it is made and how it works A product teardown process is a formal approach to learning about
How to Build a Cosmic-Ray Cloud Chamber
How to Build a Cosmic-Ray Cloud Chamber October 2008, Version 1.4 QuarkNet version. Fermi National Accelerator Laboratory. Instructions written by Jeremy Paschke, York High School and Anne Mary Teichert,
IEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
Re-packing the SRI FID/Methanizer tube 7-10-2008
7-10-2008 The SRI FID/Methanizer is located on the right side of the GC s column oven. Remove the cover and insulation from the FID/Methanizer heater block using a screwdriver. Loosen the nut holding the
Anodes and Misc Equipment
Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,
PIDG FASTON Receptacles and Tabs
Product Facts Pre-insulated terminal designed for complete and uniform reliability in the most difficult circuit environment Consists of an unplated or tin plated brass body or a tin plated phosphor bronze
CHICAGO PNEUMATIC SPRING 2013. Gyldig til 30062013. Alle priser i NOK, nto. eks. mva. Maintenance. People. Passion. Performance.
CHICAGO PNEUMATIC SPRING 2013 Gyldig til 30062013 Alle priser i NOK, nto. eks. mva. Maintenance People. Passion. Performance. CP7729 CP7748 2172,- ³ ₈, 563 Nm, 1,26 kg Art nr 894 107 7290 2333,- ½, 1250
VC 104+ Rigid Grade / Rigid Grade Imagine VC 104 Rigid Grade Commercial Customised
Page 1 of 6 instructions VC 104+ Rigid Grade / VC 104+ Rigid Grade Imagine / (for the rest of this document referred to as VC 104) can be applied to new and used trucks and trailers with painted rigid
Andersen Clad Inswing Entry Doors (2001 to Present)
Andersen Clad Inswing Entry Doors (2001 to Present) What s in This Section Clad Inswing Entry Doors Page 3 Part Illustrations 3 Parts Illustration - Single Door 3 Parts Illustration - Double Door 4 Parts
ring & lever arch binders
ring & lever arch binders 1 2 3 4 5 6 7 8 9 custom produced advertising media product catalog 1. 02 PAP - carton laminated and reinforced with overprited paper and refined with foli film PAP PP PVC 4 1
Plumbing Tools. Retail Ready Programs. Designed to Maximize Sales, Turns, Margins and Profit
Plumbing Tools Retail Ready Programs Designed to Maximize Sales, Turns, Margins and Profit Most hand tool assortments in the market do not come with the specialized tools needed to accomplish the various
1. 3539700 Model S Slimline Dermatome Set, Complete, Universal Power Supply, 110-230 Volts. 2. DP0009 Model S Slimline Dermatome Handpiece p
Skin Graft Products Dermatomes Model S Slimline Electric Dermatome Kit 1 6 5 7 3 8 2 10 9 4 Slim Design, Serious Performance No. Description 1. 3539700 Model S Slimline Dermatome Set, Complete, Universal
Rebuild Instructions for 70001 and 70010 Transmission
Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before
AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST
AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST All automotive students are required to provide their own hand tool set. The following list of tools will serve as a guide for Automotive Service Technology
BUSINESS FOR SALE. A family-owned business serving the industry since 1935 in The Bronx, New York is for sale.
BUSINESS FOR SALE A family-owned business serving the industry since 1935 in The Bronx, New York is for sale. The facility manufactures spiral and parallel tubes and cores for industry, It can supply 3/8
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7
HOME GYM. Model. Retain This Manual for Reference OWNER'S MANUAL. www.hyper-extension.com
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice www.hyper-extension.com HOME GYM 50036 Hardware Identifier Assembly Instruction Parts List Warranty
Vibration and Noise Information
Author TOOJH Rev(1) Product Ergonomics & Industrial Design 9 Jan -14 Page 1(25) Vibration and Noise Information VIBRATION AND NOISE INFORMATION... 1 INTRODUCTION... 2 GENERAL INFORMATION VALID FOR MOST
Etching using chemicals
Etching using chemicals Free tutorial Artsandtechniques.com Arts and Techniques School RJDS inc. Etching using chemicals There are several ways to etch metal, this technique uses a chemical. The etching
Application Tooling Specification Sheet
Modular Crimp Head Order No. 63825-2170 Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63825-2100 FEATURES % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically
Dow Corning PROPRIETARY. Dow Corning. A Thermal Modelling Comparison of Typical Curtain Wall Systems
Dow Corning A Thermal Modelling Comparison of Typical Curtain Wall Systems Introduction Today s Aim To understand the meaning of a U value and window energy ratings Discuss the drivers for energy efficiency
Handheld USB Digital Endoscope/Microscope
Handheld USB Digital Endoscope/Microscope ehev2-usbplus USER S MANUAL INTRODUCTION FUNCTIONS AND APPLICATIONS The USB Digital Endoscope/Microscope is a new electronic product for the micro observations.
WIRE, TERMINAL AND CONNECTOR REPAIR CONDUCTORS
CONDUCTORS Conductors are needed to complete the path for electrical current to flow from the power source to the working devices and back to the power source. Special wiring is needed for battery cables
Back to School Promotion Offers - consumable (Aug 2014)
Back to School Promotion Offers - consumable (Aug 2014) Valid till 30 th November, 2014 Beakers Beaker, Borosilicate glass, low form Code Cap. Price Promotional Price UR-C15720-0005 5ml HKD $7/pc HKD $63/
DSM http://www.dsmmfg.com 1 (800) 886-6376
DESIGN GUIDE FOR BENT SHEET METAL This guide discusses how the bends are made, what thicknesses of sheet metal are commonly used, recommended bend radius to use when modeling the part, some practical limits
Pads for use on Dual Action / Random Orbital Sanders
70515V 5115 5" PSA 5/16 x 24 12,000 70516V 5116 6" PSA 5/16 x 24 10,000 J70515 5215 5" Hook 5/16 x 24 12,000 J70516 5216 6" Hook 5/16 x 24 10,000 Firm, low profile urethane molded pad with a heavy duty
R44 SERVICE BULLETIN SB-89 (supersedes R44 Safety Alert dated 23 February 2015)
R44 SERVICE BULLETIN SB-89 (supersedes R44 Safety Alert dated 23 February 2015) Page 1 of 6 DATE: 30 March 2015 TO: R44 & R44 II Owners, Operators, and Maintenance Personnel SUBJECT: Main Rotor Blade Modification
ST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 8 4 7 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7 8 9!! 5 Part name Housing
PROCESSING OF VARIOUS MATERIALS
4 PROCESSING OF VARIOUS MATERIALS CHAPTER CONTENTS 4.1 Shaping Processes for Polymers Polymers Manufacturing Processes for Polymers 4.2 Rubber Processing Technology Processing of rubber into finished good
Coated Abrasives. Hand Sanding Sheets
Hand Sanding Sheets 21 Hand Sanding Sheets Paper Sheets PB013 FLINT LIGHT PAPER SHEETS PB013 (flint light paper) Abrasive: Flint Backing Material: Light paper Economy product For use on paint, soft wood,
Tech Shop Safety Level 2 - FN000425. Tech Shop / Tool Safety Operations. (Fermilab machines not covered in course FN000258)
Tech Shop Safety Level 2 - FN000425 Tech Shop / Tool Safety Operations (Fermilab machines not covered in course FN000258) Table of Contents Tech Shop / Tool Safety Operations 3 General Rules of Safety
Topic Page Contents Page
Heat energy (11-16) Contents Topic Page Contents Page Heat energy and temperature 3 Latent heat energy 15 Interesting temperatures 4 Conduction of heat energy 16 A cooling curve 5 Convection 17 Expansion
Step-by-step instructions:
Spark plug thread repair for Ford Triton cylinder heads Step-by-step instructions: Identification Installation Verification Specifically designed and tested for 4.6L, 5.4L, and 6.8L 2 and 4 valve heads,
Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).