FAA/NASA Workshop on Key Characteristic's for Composite Material Control Chicago, IL. Cytec Engineered Materials August 6th 2002

Size: px
Start display at page:

Download "FAA/NASA Workshop on Key Characteristic's for Composite Material Control Chicago, IL. Cytec Engineered Materials August 6th 2002"

Transcription

1 FAA/NASA Workshop on Key Characteristic's for Composite Material Control Chicago, IL Cytec Engineered Materials August 6th 2002

2 Agenda Goal of Prepreg Material Specification Sources of Variation Material Consistency and Reliability End-User Material Specification Industry Material Specification Changes to Qualified Materials Future Needs

3 Prepreg Material Specification Primary Objective: Consistent and reliable prepreg materials with time stable processing and properties. Secondary Objective: Procurement of prepreg materials manufactured with systems that imposes controls and requirements on the key physical,chemical, mechanical properties of prepreg material.

4 Sources of Variation Raw Material Components Product Scale-Up Process Baseline Cure Process Test Methods and Analysis Historical Data Bases

5 Sources of Variation Product ScaleUp: Manufacturing Process The prepreg manufacturing process must be developed and controlled though production trials on production equipment not laboratory scale equipment. This requires the raw materials, resin formulation, resin mix process, resin filming process and impregnation process be defined and controlled prior to qualification activities.

6 Sources of Variation Baseline Cure Process Failure to define the baseline process and determine the impact of critical process cure variables on material properties: Time Temperature Heating Rate Pressure Oven/Autoclave Thermal Variation

7 Material Consistency and Reliability Function of the following inputs: Raw Material Components Manufacturing Equipment-mixing and impregnation People-knowledge level and training Quality System-well defined and controlled manufacturing procedures Management Passion for product quality Six Sigma-reducing product variation

8 End-User Material Specification Current Practice Partnership between material supplier and end user is formed. MOU and LTA basis of the relationship. Supplier and end user develop baseline cure process used in the material specification prior to qualification. End user and supplier jointly develop qualification database based upon resources and knowledge levels. PCD used to define and control manufacturing process.

9 End User Specification:Military Programs Material Property Data Bases are developed under many military programs: F-18, B-2,F-22, V-22 and JSF. F-22 and V-22 Programs are shared databases. Defense to Commercialization Process Supported The data bases are eventually used for commercial applications over material lifetime. Impact of industry material specification process

10 Industry Material Specifications Criteria needed for determination of the qualification test plan Lack of specific market or application focus Differentiation process of material specifications and slash sheets. Batch definition issue is key for fibers,resin,and prepregs. Batch definition may be application specific.

11 Industry Material Specifications Definition of a change may be application specific Issue of changes to materials-regulatory Process Audit of material supplier process outlined in PCD 3rd Party Accreditation

12 Changes to Qualified Materials

13 Changes to Qualified Materials Definition of material equivalency and engineering judgement Impact of different alpha values for material equivalency and batch acceptance limits Proposed requirements in Section 8.0 are more restrictive than current MIL-HDBK-17F, Volume I, Section requirements.

14 Changes to Qualified Materials F-22 Program can be used as a model for evaluation and change criteria of qualified materials Changes addressed with no impact PAN Fiber Lines Fiber Mfg. Process Raw Material Components Resin Mixing and Fabric Weaving Equipment Facility Qualification Prepreg Mfg. Process Changes

15 Future Needs Development of advanced prepreg chemical/physical characterization techniques and analysis methods for detecting significant changes in prepreg materials. Current practices of destructive testing and focus on structural mechanical property test programs provides low sensitivity and detection level. New change procedures for changes to qualified materials-system approach.

TABLE OF CONTENTS EXECUTIVE SUMMARY 1. INTRODUCTION. 2

TABLE OF CONTENTS EXECUTIVE SUMMARY 1. INTRODUCTION. 2 TABLE OF CONTENTS Page EXECUTIVE SUMMARY ix 1. INTRODUCTION. 2 1.1 Objective. 2 1.2 Background. 3 1.3 Related documents 3 1.4 Certification Process. 4 1.5 Recommended Specification Format. 5 2. DEVELOPMENT

More information

CYCOM 934 EPOXY PREPREG

CYCOM 934 EPOXY PREPREG DESCRIPTION CYCOM 934 is a high flow, 350 F (177 C) curing epoxy resin with good 200 F (93 C) wet and 350 F (177 C) dry service capability. CYCOM 934 is formulated for autoclave processing, but it has

More information

Document No.: NRP 101

Document No.: NRP 101 Document No.: NRP 101 Prepreg Process Control Document (PCD) Preparation and Maintenance Guide Prepared by: Yeow Ng, John Tomblin Reviewed by: John Adelmann, Kit Bowman, Sunny Clarkson (Lockheed Martin

More information

CYCOM 934 Epoxy PREPREG

CYCOM 934 Epoxy PREPREG T E C H N I C A L D A T A S H E E T CYCOM 934 EPOXY PREPREG CYCOM 934 Epoxy PREPREG DESCRIPTION CYCOM 934 is a high flow, 350 F (177 C) curing epoxy resin with good 200 F (93 C) wet and 350 F (177 C) dry

More information

Low temperature curing epoxy matrix

Low temperature curing epoxy matrix Low temperature curing epoxy matrix Product Data Description HexPly M79 is a formulated epoxy resin matrix, specially designed for prepreg applications where a cure temperature below 100 C is required.

More information

Managing composite materials information - working with complex multistage process histories and test results. Granta Design

Managing composite materials information - working with complex multistage process histories and test results. Granta Design Managing composite materials information - working with complex multistage process histories and test results Granta Design FEIPLAR COMPOSITES, Sao Paulo, Brazil. November 2014 Overview Project partners

More information

Production Control Effect on Composite Material Quality and Stability

Production Control Effect on Composite Material Quality and Stability Production Control Effect on Composite Material Quality and Stability John S. Tomblin Yeow Ng Production Control Effect on Composite Material Quality and Stability Motivation and Key Issues Quality control

More information

HexFlow RTM6/RTM6-2. HexFlow

HexFlow RTM6/RTM6-2. HexFlow HexFlow RTM6/RTM6-2 Safety & Processing Recommendations for Injection & Infusion HexFlow RTM6/RTM6-2 Safety & Processing Recommendations for Injection & Infusion These recommendations along with the Technology

More information

Composite Material Qualification Process

Composite Material Qualification Process Composite Material Qualification Analysis alone is generally not considered adequate for substantiation of composite structural designs. Instead the building block approach to design development testing

More information

KEY FACTORS OF THE PEEL PLY SURFACE PREPARATION PROCESS

KEY FACTORS OF THE PEEL PLY SURFACE PREPARATION PROCESS KEY FACTORS OF THE PEEL PLY SURFACE PREPARATION PROCESS David Klapprott, Helen Li, Raymond Wong and George Geisendorfer Henkel Corporation Bay Point, California 94565 USA ABSTRACT Nylon or polyester fabrics

More information

MTM Features. Related documents. Related products. Cure cycle

MTM Features. Related documents. Related products. Cure cycle Cytec 1 of 6 MTM 45 1 MTM 45 1 MTM 45 1 is a flexible curing temperature, high performance, toughened epoxy matrix system optimised for low pressure, vacuum bag processing. MTM45 1 can also be autoclave

More information

CYCOM 970 EPOXY RESIN

CYCOM 970 EPOXY RESIN DESCRIPTION CYCOM 970 epoxy resin is a controlled flow, 350 F (177 C) curing epoxy resin with good 300 F (149 C) dry service capability. CYCOM 970 is excellent for producing nonporous, voidfree honeycomb

More information

Cost Analysis on L-shape Composite Component Manufacturing

Cost Analysis on L-shape Composite Component Manufacturing Cost Analysis on L-shape Composite Component Manufacturing R. Tong, S.V. Hoa*, and M. Chen Department of Mechanical and Industrial Engineering, Concordia University 1455 de Maisonneuve, Montréal, Québec,

More information

APrIL. Advanced Preform Manufacturing for Industrial LCM-Processes

APrIL. Advanced Preform Manufacturing for Industrial LCM-Processes APrIL Advanced Preform Manufacturing for Industrial LCM-Processes State of the art Background In the past, fully automated manufacturing technologies have been developed for the manufacturing of high quality

More information

Composite Structure Engineering Safety Awareness Course

Composite Structure Engineering Safety Awareness Course Composite Structure Engineering Safety Awareness Course Process Specifications for Composite Manufacturing Dan Ruffner Agenda Process Specifications for Composite Materials What is a process specification

More information

TECNIMELT SERIE COATING & LAMINATING LINES

TECNIMELT SERIE COATING & LAMINATING LINES TECNIMELT SERIE COATING & LAMINATING LINES Headquarter and production plants Headquarter Coating division Work shop TECNICHAL OFFICE Technical Dept is provided with modern and efficient equipment which

More information

CYCOM 7714A EPOXY RESIN

CYCOM 7714A EPOXY RESIN DESCRIPTION CYCOM 7714A resin is a 250 F (121 C) curing epoxy resin with 160 F (71 C) wet service temperature capability. CYCOM 7714A is formulated for autoclave processing but has been successfully processed

More information

High-Performance Prepregs. Preimpregnated Products for Fiber-Reinforced Composites. Composite Materials. Broad Base. Best Solutions.

High-Performance Prepregs. Preimpregnated Products for Fiber-Reinforced Composites. Composite Materials. Broad Base. Best Solutions. High-Performance Prepregs Preimpregnated Products for Fiber-Reinforced Composites Composite Materials Broad Base. Best Solutions. Carbon is Future. SGL Group The Carbon Company. Carbon Fibers & Composites

More information

Utilization of New Gas Supplies Filling Key Information Gaps

Utilization of New Gas Supplies Filling Key Information Gaps Utilization of New Gas Supplies Filling Key Information Gaps Gas Interchangeability and Quality Forum November 19-20, 2008 Washington, DC Charles Benson ENVIRON International Corp. 8 Hollis Street Groton,

More information

Document No.: NMS 128/2, Revision B, May 8 th, 2013

Document No.: NMS 128/2, Revision B, May 8 th, 2013 NATIONAL INSTITUTE FOR AVIATION RESEARCH Wichita State University Document No.: NMS 128/2, Revision B, May 8 th, 2013 NCAMP Material Specification This specification is generated and maintained in accordance

More information

Redux HP655 Toughened BMI film adhesive

Redux HP655 Toughened BMI film adhesive Redux HP655 Toughened BMI film adhesive Product Data Description HP655 is a toughened BMI structural adhesive designed for metal to metal, composite to composite, and honeycomb sandwich bonding for both

More information

Cryogenic Insulation Technologies

Cryogenic Insulation Technologies Cryogenic Insulation Technologies Presented at: HTS Wire Development and Applications Workshop Panama City, FL Matthew W. Hooker January 16, 2007 2600 Campus Drive, Suite D Lafayette, Colorado 80026 Phone:

More information

PRODUCT DEVELOPMENT FOR OUT- OF-AUTOCLAVE (OOA) MANUFACTURE OF AEROSPACE STRUCTURES

PRODUCT DEVELOPMENT FOR OUT- OF-AUTOCLAVE (OOA) MANUFACTURE OF AEROSPACE STRUCTURES PRODUCT DEVELOPMENT FOR OUT- OF-AUTOCLAVE (OOA) MANUFACTURE OF AEROSPACE STRUCTURES Steve Mortimer, Matthew J. Smith Hexcel Duxford, Cambridgeshire, UK Elizabeth Olk Hexcel Dublin, California, USA Overview

More information

Impregnating Machine

Impregnating Machine Impregnating Machine Dasan Engineering manufactured Resin Coating & Laminating Machine for composite material and insulating material in addition to Impregnating & drying machine by means of high efficiency

More information

Document No.: NMS 818. NCAMP Material Specification. Carbon Fiber Tow

Document No.: NMS 818. NCAMP Material Specification. Carbon Fiber Tow NATIONAL INSTITUTE FOR AVIATION RESEARCH Wichita State University Document No.: NMS 818 NCAMP Material Specification Carbon Fiber Tow Prepared by: Yeow Ng, John Tomblin Reviewed by: Mohamed Abdallah (consultant),

More information

Industrial application: Fibres and Fabrics

Industrial application: Fibres and Fabrics Industrial application: Fibres and Fabrics Fibres Definition Application Fibre composites Fabrics Definition Application Properties Fibres and Fabrics Carbon fibre reinforced plastics Definition - Typical

More information

These series of prepregs are suitable for the manufacture of small to large tools.

These series of prepregs are suitable for the manufacture of small to large tools. Cytec 1 of 5 LTM 10 LTM 10 series series tooling prepregs are low temperature curing epoxy resins systems that can be post cured to produce tools with a service temperature of 200 C (392 F). These series

More information

Pressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"

Pressure Equipment Directive PED 2014/68/EU Commission's Working Group Pressure Guideline G-02 Guideline related to: Annex I Section 4.3, third paragraph What is a competent body for the certification of the quality (assurance) systems of material manufacturers? A competent body for

More information

Automotive Applications

Automotive Applications CYTEC.COM Composite Materials for Automotive Applications Lightweight, High-Performance, Cost-Effective Solutions CYTEC INDUSTRIES INDUSTRIAL MATERIALS By helping to make vehicles lighter, safer, cleaner

More information

BPS240 format 1. Features. Related documents. Related products

BPS240 format 1. Features. Related documents. Related products Cytec 1 of 5 BPS240 format 1 BPS240 format 1 BPS240 is a two ply, partially impregnated epoxy prepreg system designed for the manufacture of Body In White (BIW) panels with excellent surface quality from

More information

LTM26 series prepregs are low to medium viscosity epoxy resin matrices formulated to cure at low initial cure temperatures.

LTM26 series prepregs are low to medium viscosity epoxy resin matrices formulated to cure at low initial cure temperatures. Cytec 1 of 6 LTM 26 series LTM 26 series LTM26 series prepregs are low to medium viscosity epoxy resin matrices formulated to cure at low initial cure temperatures. These prepregs can be used to manufacture

More information

Supplier Quality Assurance Requirements Manual

Supplier Quality Assurance Requirements Manual 12716 EAST PINE STREET TULSA, OK 74116 Supplier Quality Assurance Requirements Manual Approved: Mike Collins Quality Assurance Manager Precise Machining & Manufacturing 1 Record of Revisions Revision D

More information

PEKK Thermoplastic Polymer

PEKK Thermoplastic Polymer T E C H N I C A L D A T A S H E E T PEKK THERMOPLASTIC POLYMER PEKK Thermoplastic Polymer DESCRIPTION Cytec Engineered Materials PEKK composites consist of a matrix of poly(etherketoneketone) polymer with

More information

IMPROVED PROCEDURES FOR THE DETERMINATION OF T g BY DYNAMIC MECHANICAL ANALYSIS

IMPROVED PROCEDURES FOR THE DETERMINATION OF T g BY DYNAMIC MECHANICAL ANALYSIS IMPROVED PROCEDURES FOR THE DETERMINATION OF T g BY DYNAMIC MECHANICAL ANALYSIS G.D. Sims, S.J.P. Gnaniah National Physical Laboratory, Hampton Road, Teddington, TW11 0LW, UK graham.sims@npl.co.uk, sam.gnaniah@npl.co.uk

More information

GMP Issues for Start-Ups, quality in the supply chain and role of the Qualified Person (QP)

GMP Issues for Start-Ups, quality in the supply chain and role of the Qualified Person (QP) GMP Issues for Start-Ups, quality in the supply chain and role of the Qualified Person (QP) Presented by: Patrick Costello Scientific Administrator, European Medicines Agency An agency of the European

More information

Lecture 5.10: Resin Transfer Molding and Autoclave Molding

Lecture 5.10: Resin Transfer Molding and Autoclave Molding Lecture 5.10: Resin Transfer Molding and Autoclave Molding Resin transfer molding Resin transfer molding is a closed molding process. In this technique, as the name indicates, resin is transferred over

More information

RM o F Cure Toughened Epoxy Prepreg FOR HIGH PERFORMANCE AEROSPACE APPLICATIONS

RM o F Cure Toughened Epoxy Prepreg FOR HIGH PERFORMANCE AEROSPACE APPLICATIONS RM-2005 350 o F Cure Toughened Epoxy Prepreg FOR HIGH PERFORMANCE AEROSPACE APPLICATIONS RM-2005 350 o F Cure Toughened Epoxy Prepreg Renegade Materials RM-2005 is a 350 F Curing Toughened Epoxy Prepreg

More information

FIRE, SMOKE & TOXICITY RETARDANT MATERIALS

FIRE, SMOKE & TOXICITY RETARDANT MATERIALS PRODUCT INFORMATION : FST MATERIALS DELIVERING THE FUTURE OF COMPOSITE SOLUTIONS FIRE, SMOKE & TOXICITY RETARDANT MATERIALS contact@gurit.com GURIT S RANGE OF FST MATERIALS Gurit has established itself

More information

The CFRP automobile body project in Japan

The CFRP automobile body project in Japan The CFRP automobile body project in Japan Ph.D. Akihiko Kitano Toray Industries, Inc. Ehime Plant. General Manager of Composite Materials Research Laboratories Eisuke Wadahara Toray Industries, Inc. Ehime

More information

Introduction of Integrated Quality Management System Carrier Limited Korea

Introduction of Integrated Quality Management System Carrier Limited Korea Introduction of Integrated Quality Management System 21 st Century Leader of HVAC R&D & Quality Management CLK Quality Management System 1/10 FACTORY CLK () CLK s Partners 1. Factory Audit Stable Quality

More information

Helical Products Co., Inc.

Helical Products Co., Inc. Q01 GENERAL REQUIREMENTS 1. Supplier Responsibilities 1.1. Delivery Certification By delivering products or services on the Contract, the Supplier certifies that such products or services are in compliance

More information

Programme Review Day 2012 Brussels, 28 & 29 November 2012

Programme Review Day 2012 Brussels, 28 & 29 November 2012 http://www.fch-ju.eu/ Programme Review Day 2012 Brussels, 28 & 29 November 2012 Project name HyCOMP Enhanced Design Requirements and Testing Procedures for Composite Cylinders intended for the Safe Storage

More information

Carbon Fiber Composites Low Cost Materials & Manufacturing Options

Carbon Fiber Composites Low Cost Materials & Manufacturing Options Carbon Fiber Composites Low Cost Materials & Manufacturing Options George Husman Zoltek Companies, Inc. September 13, 2012 1 Carbon Fiber Markets All China Hexcel Formosa SGL Cytec AKSA Others 2011 Estimated

More information

Machined Parts Molded Parts Complex Laminates Custom Services Sheet Stock

Machined Parts Molded Parts Complex Laminates Custom Services Sheet Stock We re not just the premier high-density foam producer. We re your partner for machining, parts fabrication, pattern-to-print and scalable custom solutions. General Plastics Manufacturing Company does far

More information

Capital Contracting Office. New Hourly Rate Review Process

Capital Contracting Office. New Hourly Rate Review Process Capital Contracting Office New Hourly Rate Review Process City of Austin Capital Contracting Office (CCO) Tel. (512) 974-7026 January 14, 2016 1 Agenda Purpose of New Hourly Rate Review Hourly Rate Review

More information

Thermoset Compression, Transfer, and Injection Molding: A new Intelligent Cure Control Tool for Improved Productivity and Quality

Thermoset Compression, Transfer, and Injection Molding: A new Intelligent Cure Control Tool for Improved Productivity and Quality Industry White Paper Thermoset Compression, Transfer, and Injection Molding: A new Intelligent Cure Control Tool for Improved Productivity and Quality Signature Control Systems, Inc. 9 Industry White Paper

More information

Mid-Toughened, High Strength, Damage-Resistant, Structural Epoxy Matrix

Mid-Toughened, High Strength, Damage-Resistant, Structural Epoxy Matrix Mid-Toughened, High Strength, Damage-Resistant, Structural Epoxy Matrix Description HexPly 8552 is an amine cured, toughened epoxy resin system supplied with unidirectional or woven carbon or glass fibers.

More information

SVQ 2 Performing Engineering Operations at SCQF Level 5

SVQ 2 Performing Engineering Operations at SCQF Level 5 SVQ 2 Performing Engineering Operations at SCQF Level 5 AWarded by Excellence, Achievement & Learning Limited Accredited from 06/07/2011 to 30/06/2016 Group award number GC9W 22 Standards This SVQ is based

More information

Operational SOPs for ALL non-gmp Production Sites. Protocols and Regulation. August, 2010

Operational SOPs for ALL non-gmp Production Sites. Protocols and Regulation. August, 2010 Operational SOPs for ALL non-gmp Production Sites Protocols and Regulation August, 2010-1 - Master Table of Contents 1. QMS-005 How to Write Standard Operating Procedure 2. QMS-010 All Documents - Classification,

More information

Forth Engineering (Cumbria) Limited QUALITY MANUAL. Quality Manual Issue 4 Updated April 2012. Authorised by: Managing Director.

Forth Engineering (Cumbria) Limited QUALITY MANUAL. Quality Manual Issue 4 Updated April 2012. Authorised by: Managing Director. Quality Manual Issue 4 Forth Engineering (Cumbria) Limited QUALITY MANUAL Copy Number: 1 The information contained in this Manual is the property of Forth Engineering (Cumbria) Limited and must not be

More information

STUDY OF SPECIAL MATERIALS TO MANUFACTURE CAGES USED IN CASE OF HIGH SPEED PRECISION BEARINGS

STUDY OF SPECIAL MATERIALS TO MANUFACTURE CAGES USED IN CASE OF HIGH SPEED PRECISION BEARINGS Journal of Engineering Studies and Research Volume 18 (2012) No. 3 24 STUDY OF SPECIAL MATERIALS TO MANUFACTURE CAGES USED IN CASE OF HIGH SPEED PRECISION BEARINGS BOLFA TRAIAN EUGEN 1*, BIŢ CORNEL SANDI

More information

INTRODUCTION: PURPOSE:

INTRODUCTION: PURPOSE: UMBRA CUSCINETTI, INC. 2916 100 th Street SW Everett, WA 98204-1340 USA 425-743-2577 FAX: 425-347-0682 Printed versions may not be the latest. Suppliers shall utilize the latest version which can be found

More information

Advanced Materials. Raising insulation performance in generators and motors

Advanced Materials. Raising insulation performance in generators and motors Raising insulation performance in generators and motors Quarter 2, 2012 Table of contents Raising safety and performance Small motors Generators and rotating machines Powerful partnership between Huntsman

More information

APC-2 PEEK THERMOPLASTIC POLYMER

APC-2 PEEK THERMOPLASTIC POLYMER APC2 PEEK THERMOPLASTIC POLYMER DESCRIPTION Cytec Engineered Materials APC2 composites have a thermoplastic matrix of poly(etheretherketone) commonly referred to as PEEK. The polymer is semicrystalline

More information

Bogue Machine Company, Inc. Business Instruction

Bogue Machine Company, Inc. Business Instruction Bogue Machine Company, Inc. Business Instruction Document Title: Supplier Quality Control Requirements Document Number: Revision: Document Owner: Mark Bogue Backup Owner: Craig Bogue Parent Document: PURP-004,

More information

The Protection of Structural Steel in Hydrocarbon Fires

The Protection of Structural Steel in Hydrocarbon Fires The Protection of Structural Steel in Hydrocarbon Fires Over the past 20 years, UL 1709, Rapid Rise Fire Tests of Protection Materials for Structural Steel, has grown in importance across the worldwide

More information

Boron Nitride Composites

Boron Nitride Composites Boron Nitride Composites For this project, Dr. Chris Mangun, President of EKOS Material Inc. has been working with our research group through a Phase I and Phase II SBIR from NSF Several years ago we discovered

More information

Klik for at redigere undertiteltypografien i masteren. ESA HDI Technologies workshop

Klik for at redigere undertiteltypografien i masteren. ESA HDI Technologies workshop Klik for at redigere undertiteltypografien i masteren ESA HDI Technologies workshop Printed Circuit Boards in non woven aramide for Space applications Mission statement Printca aims to be the preferred

More information

CYCOM 919 Epoxy Prepreg

CYCOM 919 Epoxy Prepreg T E C H N I C A L D A T A S H E E T CYCOM 919 EPOXY PREPREG CYCOM 919 Epoxy Prepreg DESCRIPTION CYCOM 919 is a modified epoxy resin supplied on graphite, glass and aramid reinforcing fibers. This resin

More information

Automotive Applications

Automotive Applications CYTEC.COM Composite Materials for Automotive Applications Lightweight, High-Performance, Cost-Effective Solutions Delta Motorsport Ltd. CYTEC INDUSTRIES INDUSTRIAL MATERIALS By helping to make vehicles

More information

Guaranteeing long-term cost savings through energy efficient measures, with the option of fully funded solutions

Guaranteeing long-term cost savings through energy efficient measures, with the option of fully funded solutions Guaranteeing long-term cost savings through energy efficient measures, with the option of fully funded solutions What is energy performance contracting? Innovative way to implement energy saving improvements

More information

Characterization of Electronic Materials Using Thermal Analysis

Characterization of Electronic Materials Using Thermal Analysis application Note Thermal Analysis Characterization of Electronic Materials Using Thermal Analysis Thermal analysis comprises a series of powerful techniques for the characterization of the thermal, physical,

More information

CHAPTER 6 PROCUREMENT AND SUPPLY OF PHARMACEUTICAL PRODUCTS IN THE PUBLIC AND PRIVATE MEDICAL SECTORS

CHAPTER 6 PROCUREMENT AND SUPPLY OF PHARMACEUTICAL PRODUCTS IN THE PUBLIC AND PRIVATE MEDICAL SECTORS CHAPTER 6 PROCUREMENT AND SUPPLY OF PHARMACEUTICAL PRODUCTS IN THE PUBLIC AND PRIVATE MEDICAL SECTORS Overview 6.1 This chapter sets out the Review Committee s findings and recommendations on procurement

More information

Newport 301 Product Data Sheet

Newport 301 Product Data Sheet Newport 301 Product Data Sheet Description: Newport 301 Newport 301 is a 250 F to 300 F cure, semi-toughened, controlled flow epoxy resin system. Versatile processing, excellent mechanical properties,

More information

Improved Materials and Processes for Wind Turbine Blades. by Chris Shennan 29 March 2012 JEC Wind Energy Forum

Improved Materials and Processes for Wind Turbine Blades. by Chris Shennan 29 March 2012 JEC Wind Energy Forum Improved Materials and Processes for Wind Turbine Blades by Chris Shennan 29 March 2012 JEC Wind Energy Forum Agenda Introduction to Hexcel Prepreg technology Prepregs for the surface Prepregs for the

More information

Current FDA Perspective on Leachable Impurities in Parenteral and Ophthalmic Drug products

Current FDA Perspective on Leachable Impurities in Parenteral and Ophthalmic Drug products Current FDA Perspective on Leachable Impurities in Parenteral and Ophthalmic Drug products AAPS Workshop on Pharmaceutical Stability Scientific and Regulatory Considerations for Global Drug Development

More information

Renewable Energy Structures

Renewable Energy Structures CYTEC.COM Composite Materials for Renewable Energy Structures Solutions for a global market. CYTEC INDUSTRIES INDUSTRIAL MATERIALS Cytec is engaged in a continuous development programme aimed at introducing

More information

SAFETY AND PERFORMANCE RELIABILITY OF ELECTRICAL INSULATION SYSTEMS

SAFETY AND PERFORMANCE RELIABILITY OF ELECTRICAL INSULATION SYSTEMS SAFETY AND PERFORMANCE RELIABILITY OF ELECTRICAL INSULATION SYSTEMS Safety and Performance Reliability of Electrical Insulation Systems Safety and performance reliability are essential attributes for an

More information

TECHNICAL DATA SHEET

TECHNICAL DATA SHEET EPOXY - NG1001 Formulated Resin System for Pre-preg Process General information Description: TECHNICAL DATA SHEET EPOXY - NG1001 is a formulated epoxy based resin system for hot melt pre-preg and pressure

More information

Improving PWB Productivity by Reducing Process Cycle Time

Improving PWB Productivity by Reducing Process Cycle Time Improving PWB Productivity by Reducing Process Cycle Time Published by IPC 2215 Sanders Road Northbrook, IL 60062-6135 Tel 847 790.5362 Fax 847 509.9798 URL www.ipc.org Presented at Printed Circuits Expo

More information

THE USE OF THERMAL EXPANSION CORES FOR NON-AUTOCLAVE PROCESSING OF PRE-PREG MATERIALS

THE USE OF THERMAL EXPANSION CORES FOR NON-AUTOCLAVE PROCESSING OF PRE-PREG MATERIALS THE USE OF THERMAL EXPANSION CORES FOR NON-AUTOCLAVE PROCESSING OF PRE-PREG MATERIALS Presented by Mark Crouchen Rockwood Composites Ltd Tel 01626 240026 What is a Pre-preg? Pre-preg is a the name used

More information

New generation of materials for the Aerospace industry: Green Aircraft Interiors

New generation of materials for the Aerospace industry: Green Aircraft Interiors New generation of materials for the Aerospace industry: Green Aircraft Interiors Pedro P. Martín Leuven, 04.12.2012 BOEING is a trademark of Boeing Management Company. Copyright 2011 Boeing. All rights

More information

PREDICTION OF ENERGY INTENSITY OF CARBON FIBER REINFORCED PLASTICS FOR MASS-PRODUCED PASSENGER CARS

PREDICTION OF ENERGY INTENSITY OF CARBON FIBER REINFORCED PLASTICS FOR MASS-PRODUCED PASSENGER CARS The Ninth Japan International SAMPE symposium Nov.29 Dec.2, 2005 PREDICTION OF ENERGY INTENSITY OF CARBON FIBER REINFORCED PLASTICS FOR MASS-PRODUCED PASSENGER CARS Tetsuya Suzuki and Jun Takahashi The

More information

PURCHASE ORDER QUALITY CLAUSE ATTACHMENT

PURCHASE ORDER QUALITY CLAUSE ATTACHMENT By accepting a purchase contract from Canyon Composites, you are accepting responsibility for all General and Special Quality Clauses as described in either TYPE 1 or 2 below: TYPE 1: NON FLIGHT ORDERS

More information

Nitrotriazolone Process Optimization Authors: Timothy E. Dawag & Dr. Jacob Morris 15 May 2012

Nitrotriazolone Process Optimization Authors: Timothy E. Dawag & Dr. Jacob Morris 15 May 2012 U.S. Army Research, Development and Engineering Command Nitrotriazolone Process Optimization Authors: Timothy E. Dawag & Dr. Jacob Morris 15 May 2012 Acknowledgements US ARMY RDECOM ManTech Funding US

More information

HexWeb EC Engineered Core

HexWeb EC Engineered Core INNOVATIVE CUSTOM SOLUTIONS HexWeb EC Engineered Core Hexcel is the world s leading innovator and manufacturer of advanced structural materials the strength within our customers products. Strong yet lightweight,

More information

Module Makers Perspective International PV Module Quality Assurance Forum San Francisco, USA

Module Makers Perspective International PV Module Quality Assurance Forum San Francisco, USA Module Makers Perspective International PV Module Quality Assurance Forum San Francisco, USA Presenter: Yoshihito Eguchi, SHARP CORPORATION July 15 th, 2011 CONTENTS 1. Introduction 2 2. Desirable lifetime

More information

POLYMER MATRIX COMPOSITES. 1-Thermoset Resins

POLYMER MATRIX COMPOSITES. 1-Thermoset Resins POLYMER MATRIX COMPOSITES Polymer-matrix composites (PMCs) consist of a polymer resin as the matrix, filled with various types of materials. This type of composite is used in the greatest diversity of

More information

ASME REINFORCED THERMOSET PLASTICS CORROSION RESISTANT EQUIPMENT

ASME REINFORCED THERMOSET PLASTICS CORROSION RESISTANT EQUIPMENT Two Park Avenue New York, NY 10016-5990 U.S.A. tel 1.212.591.8500 fax 1.212.591.8501 www.asme.org ASME REINFORCED THERMOSET PLASTICS CORROSION RESISTANT EQUIPMENT GUIDE FOR ASME RTP SURVEY TEAMS FOR SURVEY

More information

CYTEC.COM. Tooling Solutions. A unique approach to composite tooling.

CYTEC.COM. Tooling Solutions. A unique approach to composite tooling. CYTEC.COM Tooling Solutions A unique approach to composite tooling. CYTEC INDUSTRIES INDUSTRIAL MATERIALS Cytec s innovation extends to providing a complete tooling solution to the customer part manufacturing

More information

Optimized Electrical Insulation Systems under Technological and Commercial Aspects

Optimized Electrical Insulation Systems under Technological and Commercial Aspects Optimized Electrical Insulation Systems under Technological and Commercial Aspects Dr. Andreas Levermann Schwering & HasseElektrodraht GmbH Jörg Nelges Pucaro Elektro-Isolierstoffe GmbH Thomas Haeusler

More information

Core Materials Processing Guide

Core Materials Processing Guide Core Materials Processing Guide Dallas Miami Ecuador www.corelitecomposites.com Contents Product Options... 3 BALSASUD Core 1. Packaging & Handling... 4 2. Storage... 4 3. Applications... 5 CoreLite Board

More information

FM BMI FILM ADHESIVE

FM BMI FILM ADHESIVE DESCRIPTION FM 450-1 film adhesive is a next generation high performance BMI adhesive for bonding both composite and metallic structures. This new adhesive provides a unique combination of high Tg, toughness

More information

Succinate Esters as Plasticizers

Succinate Esters as Plasticizers Succinate Esters as Plasticizers Produces flexible PVC with mechanical properties similar to those produced by DOA Phthalate-free, bio-based plasticizer Low temperature flexibility and migration similar

More information

Ron Shaham. Expert Witness in Islamic Courts : Medicine and Crafts in the Service of Law. : University of Chicago Press,. p 38

Ron Shaham. Expert Witness in Islamic Courts : Medicine and Crafts in the Service of Law. : University of Chicago Press,. p 38 : University of Chicago Press,. p 38 http://site.ebrary.com/id/10381149?ppg=38 : University of Chicago Press,. p 39 http://site.ebrary.com/id/10381149?ppg=39 : University of Chicago Press,. p 40 http://site.ebrary.com/id/10381149?ppg=40

More information

May not be reproduced in any form without permission from the publisher, except fair uses permitted under U.S. or applicable copyright law.

May not be reproduced in any form without permission from the publisher, except fair uses permitted under U.S. or applicable copyright law. : University of Chicago Press,. p 24 http://site.ebrary.com/id/10292358?ppg=24 : University of Chicago Press,. p 25 http://site.ebrary.com/id/10292358?ppg=25 : University of Chicago Press,. p 26 http://site.ebrary.com/id/10292358?ppg=26

More information

. Perspectives on the Economics of Aging. : University of Chicago Press,. p 3 http://site.ebrary.com/id/10209979?ppg=3 Copyright University of

. Perspectives on the Economics of Aging. : University of Chicago Press,. p 3 http://site.ebrary.com/id/10209979?ppg=3 Copyright University of : University of Chicago Press,. p 3 http://site.ebrary.com/id/10209979?ppg=3 : University of Chicago Press,. p 4 http://site.ebrary.com/id/10209979?ppg=4 : University of Chicago Press,. p 297 http://site.ebrary.com/id/10209979?ppg=297

More information

Quality surveillance of filling materials for security products ECB S R07

Quality surveillance of filling materials for security products ECB S R07 JANUARY 2016 To replace November 2013 version European Certification Body GmbH Copying, processing, distributing and any kind publication not allowed Quality surveillance of filling materials for security

More information

Measurement of Tg by DSC

Measurement of Tg by DSC application note Measurement of Tg by DSC W.J. Sichina What is Tg? Tg is the accepted abbreviation for the glass transition temperature. All amorphous (non-crystalline or semi-crystalline) materials will

More information

Composite Materials

Composite Materials Coordinating unit: 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering Teaching unit: 737 - RMEE - Department of Strength of Materials and Structural Engineering Academic

More information

Snap Cure Materials for High Volume Manufacture of Automotive Parts. Chris Shennan JEC Paris: 12 March 2014

Snap Cure Materials for High Volume Manufacture of Automotive Parts. Chris Shennan JEC Paris: 12 March 2014 Snap Cure Materials for High Volume Manufacture of Automotive Parts Chris Shennan JEC Paris: 12 March 2014 Agenda Hexcel overview Background to applications and solutions M77: snap cure matrix M77 HexMC:

More information

SQS Supplement D. Manufacturers. Elastomeric Bearing. MnDOT Supplier Qualification Standard

SQS Supplement D. Manufacturers. Elastomeric Bearing. MnDOT Supplier Qualification Standard SQS Supplement D MnDOT Supplier Qualification Standard Elastomeric Bearing Manufacturers Standard supports the Department's Approved Supplier Program for Structural Metals Suppliers as described in the

More information

Product Data. HexPly 8552 Epoxy matrix (180 C/356 F curing matrix)

Product Data. HexPly 8552 Epoxy matrix (180 C/356 F curing matrix) HexPly 8552 Epoxy matrix (180 C/356 F curing matrix) Product Data Description HexPly 8552 is a high performance tough epoxy matrix for use in primary aerospace structures. It exhibits good impact resistance

More information

Preliminary Audit to a Pre-Approval Inspection

Preliminary Audit to a Pre-Approval Inspection Preliminary Audit to a Pre-Approval Inspection Chapter Day Symposium Robert Seltzer GlaxoSmithKline Pre-PAI Areas of Concentration 1. Integrity of the submission via its raw data 2. Proper conduct and

More information

THE INDUSTRY S COMPOSITE LABORATORY. The Industry s Composite Laboratory

THE INDUSTRY S COMPOSITE LABORATORY. The Industry s Composite Laboratory THE INDUSTRY S COMPOSITE LABORATORY The Industry s Composite Laboratory 1 New applications of composite materials for industrial products The Industry s Composite Laboratory (IKL) is an exciting new partnership

More information

Harnessing nature s power. Hexcel s composite materials, processes and solutions for wind turbine blades

Harnessing nature s power. Hexcel s composite materials, processes and solutions for wind turbine blades Harnessing nature s power Hexcel s composite materials, processes and solutions for wind turbine blades Harnessing nature s power 1 Hexcel is a leading global supplier of advanced composite materials to

More information

Introduction Composite Materials and Optical Microscopy

Introduction Composite Materials and Optical Microscopy Optical Microscopy of Fiber-Reinforced Composites Copyright 2010, ASM International B.S. Hayes and L.M. Gammon All rights reserved. (#05303G) www.asminternational.org Chapter 1 Introduction Composite Materials

More information

TT 505 NAGARAJAN THOPPEY MUTHURAMAN

TT 505 NAGARAJAN THOPPEY MUTHURAMAN TT 505 NAGARAJAN THOPPEY MUTHURAMAN NTHOPPE@NCSU.EDU Agenda Introduction Principles Methods Comparison of Methods Applications NONWOVEN FINISHING Mechanical Finishing Chemical Finishing Compacting & Creeping

More information

Composite Manufacturing Training Pathways. Presented by: Stan Rice, EMCC Workforce Coordinator & Joe Cook, EMCC Workforce Technical Training Manager

Composite Manufacturing Training Pathways. Presented by: Stan Rice, EMCC Workforce Coordinator & Joe Cook, EMCC Workforce Technical Training Manager Composite Manufacturing Training Pathways Presented by: Stan Rice, EMCC Workforce Coordinator & Joe Cook, EMCC Workforce Technical Training Manager Workforce Manufacturing Skills Certification Training

More information