Business Development Field Services & Special Projects
|
|
|
- Sharleen Campbell
- 10 years ago
- Views:
Transcription
1 Business Development Field Services & Special Projects
2 Your Global Supplier
3 Index About us o o o o Organization chart Certificates Quality Assurance Our people Field Services & Special Projects o o o o o o Casks Racks Heat exchangers Services & special components Decommisionning and waste management Outages services & maintenance
4 About us Since 1973, permanent and continuous presence in civil nuclear equipment supply Owned by Sociedad Estatal de Participaciones Industriales (SEPI) One subsidiary company: o Enwesa (services) One shared company: o WTS (engineering) For more details visit
5 Organization Chart PRESIDENT & CEO Eduardo G. Mesones VP BOARD SECRETARY & COUNSEL Javier Mª Simón VP CONTROLLER Carmen Escaja SENIOR VICE- PRESIDENT MANAGING DIRECTOR Rafael Triviño VP OPERATIONS Alfonso Álvarez Miranda VP ADMINISTRATION & RESOURCES Manuel J. Sánchez VP PROJECTS Miguel A. Anderez VP NUCLEAR BUSINESS José María Zubimendi VP HUMAN RESOURCES Ángel Cosio VP BUSINESS DEVELOPMENT María Vega Production Engineering Reliability & Operational Excellence Procurement Administration & Finance Information Technology Quality & Environment Projects Planning Marketing & Sales Proposals & Contracts Social & Personnel Management Administration of Collaborators Skills Management & Development Special Projects Decommissioning and waste management Marketing & Sales ENWESA
6 Ensa certificates OHSAS 18001:2007 Occupational Health & safety Management System ISO 14001:2004 Environmental Management System ISO 9001:2008 Quality Management System UNE-EN ISO/IEC 17025:2005 Accredited Laboratory UNE Research and Development International Management Standard EN ISO Quality Requirements for Welding ASME Certificates: o N Certificate of Authorization o NPT Certificates of Accreditation & Authorization o NA Certificate of Accreditation o N3 Certificate of Authorization o NS Certificate of Accreditation And more
7 Ensa Quality Assurance Program Full compliance with: o ASME Code Section III-NCA and WA o US Federal Regulation 10 CFR 50 Appendix B o US Federal Regulation 10 CFR 21 o ISO 9001:2008 Quality Management System o ISO 14001:2004 Environmental Management System o RCC-M A5200 Validation of Quality System through external audits o o o Technologists Regulatory Bodies Owners & Operators and many others
8 Our People Employees in 2011: % operators 43% engineers 5% administratives Average age: 42 52% University Degrees 29% 14% 5% Non University Technicians Administratives Workers 700 ENSA ENWESA < > /01/ /12/2009
9 Field Services & Special Projects Field Services & Special Projects area was created in 1980 and since then, it has been working at nuclear plants on tasks like fuel handling, maintenance, decontamination and decommissioning, and manufacturing special equipments as well as casks and racks for nuclear fuel management. Why Ensa Services? World leader as supplier of nuclear components and services Great knowledge in ASME code and other codes & standards (RCCM, CODAP,TUV, ) Welding and machining technologies Quality assurance and quality control Multi-System supplier Complete life cycle involvement in a wide variety of equipment Competitive pricing
10 Business Areas Special components & services On site services & maintenance Engineering and Technical Support Service to NPP Decommissioning and waste management Casks, Racks and Heat exchangers
11 Business Areas Special components & services On site services & maintenance Engineering and Technical Support Service to NPP Decommissioning and waste management Casks, Racks and Heat exchangers
12 Special components & services Projects for EPR Other special projects Pressure equalization ceiling Limonite ring Steel boxes with pipe penetrations Substructures in four LAR-Waterpools Shieldings
13 Projects for EPR Pressure Equalization Ceiling The pressure equalization ceiling consist of two steel structures. During normal plant operation is ensuring the separation of ventilation between accessible and inaccessible part of containment. Works Engineering Purchasing Qualification Manufacturing Testing Installation Maintenance works Material: Carbon Steel S355J2 Weight: 24 Tm Construction Code: EN
14 Projects for EPR Limonite Ring The Limonite Ring (LR) is a steel structure, located in the reactor pit between the wall openings of the reactor coolant lines (RCL) and the pool liner support. Ancillary devices to ensure the quality of the component: Approx. ø9000 mm Welding Device: Used for welding the 4 slices on site. Stiffener: To avoid deformations during introduction into the reactor pit. Lifting Device: Used to support the loads during puring operations.
15 Projects for EPR Steel boxes with pipe penetration The function of SBPP is to serve as wall elements containing penetration sleeves for main piping branches on Safeguard Buildings Main Dimensions: 5,75m x 5,20m x 2m Materials: Carbon Steel S355J2 Weight: 70 Tm Construction Code: EN
16 Projects for EPR Shieldings Engineering Procurement Welders qualification Manufacturing NDT testing Delivery and transport Installation works Works involving the use, manipulation, machining and coupling of Lead components Materials: Carbon Steel S235J2, Lead, Stainless Steel 316Ti Construction Code: EN KPL KTA Steel Wall AMS Plummet Fuel Transfer Tube
17 Special components & services Projects for EPR Other special projects ASME III Tank Handling tools Decontamination module Shielding containment doors Nozzle dams Mock ups for tool testing & special assemblies Wave generation system
18 Other special projects Taylor made solutions for a wide range of projects Highly qualified personnel for off site and on site interventions Special tools development to meet high standard requirements Nozzle Dams On site fabrication and tests of Almaraz NPP tank, ASME III Code Decontamination module for Kozloduy NPP 2 personnel Beta-gamma contamination monitors 1 hot shower 8 personnel locks
19 Other special projects Design and manufacturing of special handling tools Design and manufacturing of special handling tools for Ascó NPP
20 Other special projects Design and manufacturing of special tools for racks Rack movements crane tool Decontamination tool To clean the racks and pool
21 Other special projects Design fabrication and installation of 8 shielding containment doors for Trillo NPP Stainless Steel ASME material, KTA code Non lubricated mechanisms Mock-ups design and fabrication of tools testing and personnel training DPT cask loading structure Support ring Wendelstein 7-x For Max-Planck Institut fur Plasmaphysik Low magnetic-permeable stainless steel Welding and assembly of 10 sectors of vacuum vessel
22 Business Areas Special components & services On site services & maintenance Engineering and Technical Support Service to NPP Decommissioning and waste management Casks, Racks and Heat exchangers
23 On site services & maintenance Cutting and machining equipment Milling, drilling, boring, grinding and cutting machines Electro Discharge Machining EDM. Metal Disintegration Machining. EDM vessel machines. Other Customized machines. Welding development for field interventions Alloy materials Narrow gap technology Automatic orbital welding Dissimilar metal weld repairs Temperbead cladding Nozzle repairs Valve repairs Special tools development Reactor Pressure Vessel repair equipment development Racks handling device
24 On site services & maintenance Robotic, automatics, instrumentation & control Special assemblies. Data acquisition: profilometry, vision, alignement, etc. Tools design and fabrication for hazardous environments Process Automation and remote control handling. Robotics applied to: welding, cleanliness, measurements. Control panel Mobile robot Pump vibration analysis and balancing Highly specialized data processing equipment Data recollecting during start up, shut down and outage of pumps Motor-pump operation cycle stability analysis Maintenance recommendations
25 On site services & maintenance Activities for primary coolant system equipment: o Reactor vessel head opening / closure and internals removal o Steam generator and pressurizer opening / closure o Reactor coolant pumps / motors maintenance o On site repair and machining of components o Steam generator sludge lancing o Reactor internal Split-Pin replacement Fuel activities: o New and irradiated fuel handling o Inspection: visual, UT and sipping o Nuclear fuel repair and special operations (Cleaning) Waste handling and Decommissioning NUCLEAR SERVICES
26 On site services & maintenance MAINTENANCE: OUTAGES AND OPERATION MECHANICAL MAINTENANCE & CONDENSERS Mechanical Maintenance: o Heat exchangers and condensers: cleaning, retubing o Rotating equipment: revision of pumps, motors, air blowers o Gas and steam turbines o Diesel engines Electrical and I&C Maintenance: o H.V.: Substations and transport lines o M.V. and L.V.: Transformation centers, lines, motors o Process equipment o Analyzers
27 On site services & maintenance Mechanical erection: o Gas and steam turbines o Boilers, heat exchangers, equipment, etc. o Piping, pre-manufacturing and assembly. o Structures Electrical and I&C erection Detailed engineering and start-up Mechanical, electrical and I&C modifications Special welding and machining on site Technical assistance office ERECTION WORKS IN POWER GENERATING PLANTS
28 Business Areas Special components & services On site services & maintenance Engineering and Technical Support Service to NPP Decommissioning and waste management Casks, Racks and Heat exchangers
29 Engineering and Technical Support Service to NPP SIDP System o Working with CIC Computer Consulting Centralised system: All data, processes and displays Supplying Information to users such as: All historical and online data All maps and diagrams for managing Internet Web browser Ability of: Contrast information between different sources Making easier the data analysing Helping the usability and data access
30 Engineering and Technical Support Service to NPP TECHNOLOGY Process automation: o Industrial automation studies and projects o Development of detailed engineering o Network architecture o Manufacturing o Programming (System defined by customer) o Installation and start-up o Documentation: Technical files, CE marking Robots: Cartesian, SCARA, Articulated. o Palletizing, handling, welding, machining, press tending, inspection, sealing and painting. Quality Control systems: o Testing beds o Data acquisition from production system Machines upgrade as per R.D. 1215/97
31 Engineering and Technical Support Service to NPP COMMUNICATIONS AND SECURITY Megaphone systems Observance of emergency rules EN Process interphone systems Telephony/ Data/ PABX/ LAN / WAN Video Surveillance/ CCTV Anti-deflagrate systems Anti-intrusion systems and perimeter control Security systems for access control Radio systems VHF-UHF Optical fiber communications
32 Business Areas Special components & services On site services & maintenance Engineering and Technical Support Service to NPP Decommissioning and waste management Casks, Racks and Heat exchangers
33 Decomisionning & waste management Electropolishing Plant for surfaces treatment or decontamination Steam Generator Channel Head Electropolishing
34 Decomisionning & waste management Steam Generators electropolished by Ensa Beaver Valley RSG: 3 Steam Generators in year 2005 Comanche Peak RSG: 4 Steam Generators in year 2006 Diablo Canyon RSG: 4 Steam Generators in year 2007 Diablo Canyon RSG: 4 Steam Generators in year 2008 Waterford RSG: 2 Steam Generators in year 2012
35 Decomisionning & waste management Waste Management Engineering Free release material studies and tests Waste treatment studies and waste cementation test Volume reduction studies Supply and retrofit of waste treatment plants Operational support of waste treatment plants Turnkey projects of waste treatment and decommissioning Design and manufacturing of robotic devices for the manipulation of radioactive materials Radwaste capacities On site project management Erection on Site and plant support Erection, installation commissioning, and startup operations Training of the operation personnel for radwaste and decommissioning work Modifications and maintenance of decommissioning and radwaste treatment plants
36 Decomisionning & waste management Vacuum drying plant Volume reduction of wastes Patented and installed in all spanish NPP except Ascó NPP and Cofrentes NPP Drum inside cabin Mobile cementation plant Retrieval and immobilisation of 32 m3 resins from Vandellós 1 NPP 350 Immobilised drum waste in cemented matrix up to 14%w dry resins content Decontamination equipment supply High pressure blasting for uranium dust. Pierrelat (Tricastin. France) Triple chemical baths (Decontamination shop for Trillo NPP and Vandellós II NPP)
37 Decomisionning & waste management Ciemat JEN-1Research Reactor dismantling Reactor general view Retrieval of irradiation chamber Reactor pool damp isolation Sectionning and cutting activities Segregation and packaging of wastes Hot zones ventilation control
38 Decomisionning & waste management Vandellós I NPP dismantling Dismantling operations in a gas graphite reactor Retrieval and conditioning of graphite sleeves and other wastes from silos Facilities for graphite treatment o Sleeves scrapping o Segregation of inox material
39 Decomisionning & waste management Garoña NPP waste retrieval Zone confinement by movable hut System ventilation test Microcell immobilisation through cement pouring Microcell drum automatic closing station Special tools for solid parts retrieval
40 Decomisionning & waste management José Cabrera NPP dismantling Auxiliary beam dismantling Dismantling operations of PWR reactor Secondary vapor piping o o Containment building Auxiliary building Conditioning and segregation of wastes in supplied containers Dismantling of all equipments except reactor and evaporator Spent fuel pool internals retrieval Transport of irradiated elements to Ancillary Dismantling Building o o Baskets for underwater loading Shielded containment box for transportation Gas radiation decay tank HX cutting operation
41 Business Areas Special components & services On site services & maintenance Engineering and Technical Support Service to NPP Decommissioning and waste management Casks, Racks and Heat exchangers
42 Casks, Racks and Heat exchangers Casks Experience in cask design and manufacture since 1985 Complete involvement from basic design concept to fuel loading in the NPP Tried and tested experience More than 100 casks supplied Multiple technologies including proprietary Ensa designs Ensa - Hitachi HIEN Dual Purpose Cask NAC STC Cask Holtec HI-Storm System Ensa Universal Cask (ENUN 32P) Transnuclear TN-68 Cask
43 Casks, Racks and Heat exchangers Racks Experience in cask design and manufacture since 1986 Multiple technologies including proprietary Ensa designs Complete involvement from basic design concept to fuel loading in the NPP Tried and tested experience More than positions manufactured in more than 20 projects Reracking and new racks exchangers installations Heat Exchangers Manufacturing and installation Heat exchangers
44 Conclusion Why Ensa? World leader as supplier of nuclear components and services Great knowledge in ASME code and other codes & standards (RCCM, CODAP,TUV, ) Welding and machining technologies Quality assurance and quality control Multi-System supplier Complete life cycle involvement in a wide variety of equipment Competitive pricing
45 Your global supplier
46 for satisfied customers
47 EQUIPOS NUCLEARES S.A. Oficina Central / Head Office: José Ortega y Gasset 20-5º Madrid, Spain Phone: Fax: [email protected] Instalaciones / Facility: Avda. Juan Carlos I, Maliaño, Cantabria, Spain Phone: Fax: [email protected]
Spanish Scenario for Spent Fuel Management
ENSA (Grupo SEPI) Spanish Scenario for Spent Fuel Management INMM Spent Fuel Management Seminar XXIX Arlington, VA January 14, 2014 David Garrido Design & Licensing Manager. Spent Fuel Cask Div. Equipos
General Information. Polígono Industrial Heras nave 136 39792 Heras, Cantabria T. 942 253 815 F. 942 253 851 www.enwesa.com
General Information Polígono Industrial Heras nave 136 39792 Heras, Cantabria T. 942 253 815 F. 942 253 851 www.enwesa.com GENERAL Shareholders: ENSA 75% and WTS 25%. Shareholder (Direct and indirect involvement):
Treatment Centers for Radioactive Waste
Treatment Centers for Radioactive Waste TREATMENT CENTERS FOR RADIOACTIVE WASTE Introduction Nuclear facilities such as nuclear power plants, reprocessing plants, nuclear fuel cycle production units, laboratories
Join the UK Nuclear Renaissance. Procurement & Quality Process
Join the UK Nuclear Renaissance Procurement & Quality Process 1 AREVA NP UK Supplier Day, March 16th Birmingham EPR is a trademark of the AREVA Group 1 The Process: AREVA Supply Chain Strategy Didier David
Piping Systems for Nuclear Power Industry. Prague, October 2011
Piping Systems for Nuclear Power Industry Prague, October 2011 Introduction of the company Leading Czech supplier of piping systems for power engineering 60 years of experience in the field of power industry
February 19, 2014. Senior Fellow, Nuclear Energy Systems & Services Division Power Systems Company
JAPAN-U.S. DECOMISSIONING AND REMEDIATION FUKUSHIMA RECOVERY FORUM February 19, 2014 Senior Fellow, Nuclear Energy Systems & Services Division Power Systems Company Toshiba global formation Information
Chemical Decontamination and Fluid Handling Services
Chemical Decontamination and Fluid Handling Services Westinghouse is a global industry expert in decontamination and fluid handling processes, with proven abilities in decontamination and remediation work.
C P W R. Research & Training
C P W R Research & Training BCTD / AFL-CIO NIEHS CPWR CPWR Affiliated Unions CONSTRUCTION WORKFORCE Asbestos Workers & Insulators Boilermakers Bricklayers Carpenters & Joiners Plasterers & Cement Masons
POWER & RENEWABLE ENERGY SERVICES
POWER & RENEWABLE ENERGY SERVICES Nuclea Siting - Assistance to permitting Environmental Impact Assessment Safety and environmental audits Construction code compliance and design review Supplier Technical
POWER & RENEWABLE ENERGY SERVICES
POWER & RENEWABLE ENERGY SERVICES Siting - Assistance to permitting Environmental Impact Assessment Safety and environmental audits Construction code compliance and design review Supplier Technical Assessment
Retrieval of Damaged Components form Experimental Fast Reactor Joyo Reactor Vessel
Retrieval of Damaged Components form Experimental Fast Reactor Joyo Reactor Vessel June. 8 th, 2010 Yukimoto MAEDA Japan Atomic Energy Agency (JAEA) Experimental fast reactor Joyo Joyo (Oarai R&D Center)
DOCUMENTATION FOR QUALIFICATION SYSTEM
DOCUMENTATION FOR QUALIFICATION SYSTEM MATERIAL GROUP: PRESSURE EQUIPMENT MAINTENANCE, REPAIR INTERNAL CODE OF MATERIAL GROUP: MM10300 New code according the registration on myhome: MMGV03 CPV CODE: 45259000-7,
Nuclear power plant systems, structures and components and their safety classification. 1 General 3. 2 Safety classes 3. 3 Classification criteria 3
GUIDE 26 June 2000 YVL 2.1 Nuclear power plant systems, structures and components and their safety classification 1 General 3 2 Safety classes 3 3 Classification criteria 3 4 Assigning systems to safety
APEC CAPABILITIES PROJECT MANAGEMENT / SUPPORT
PROJECT MANAGEMENT / SUPPORT Capital Cost Savings Construction Monitoring and Assistance In-Plant Production Assistance In-Plant Maintenance Assistance Procurement Assistance Project Cost Estimating o
APPENDIX CC NUCLEAR WASTE STORAGE
APPENDIX CC NUCLEAR WASTE STORAGE APPENDIX CC NUCLEAR WASTE STORAGE MICHIEL P.H. BRONGERS 1 SUMMARY Nuclear wastes are generated from spent nuclear fuel, dismantled weapons, and products such as radio
Holtec International. Multi-Purpose Canisters for Long-Term Interim Storage. June 17, 2015. Rick Springman, Ph.D. Director of International Projects
Holtec International Multi-Purpose Canisters for Long-Term Interim Storage June 17, 2015 Rick Springman, Ph.D. Director of International Projects Dry Storage & Transport Projects Wet Storage Projects 1
AAF Manufacturing Services. Leading the way in engineering excellence
AAF Manufacturing Services Leading the way in engineering excellence Contents Introduction Parts Manufacture Weld Assembly Surface Protection Mechanical & Electrical Final Assembly service agreements Introduction
Fire Protection Program Of Chashma Nuclear Power Generating Station Pakistan Atomic Energy Commission 5/28/2015 1
Fire Protection Program Of Chashma Nuclear Power Generating Station Pakistan Atomic Energy Commission 5/28/2015 1 Nuclear Power in Pakistan Nuclear Power Plants Capacity (MWe) Year of Commissioning In
INTRODUCTION. Three Mile Island Unit 2
INTRODUCTION here was an accident at Three Mile Island Unit 2 on March 28,1979. It caused extensive damage to the plant's nuclear fuel core. Most of the plant's major systems were relatively undamaged.
COMMERCIAL REPORT / STOCK CONDITION SURVEY. Sydenham Hill Estate Sydenham Hill London SE 23
COMMERCIAL REPORT / STOCK CONDITION SURVEY For Sydenham Hill Estate Sydenham Hill London SE 23 Submission Prepared by Gas Advisory Services Limited Date: 4 th June 2013 Gas Advisory Services Limited Phoenix
EXCHANGE OF STEAM GENERATORS IN PRESSURIZED WATE R REACTOR POWER PLANT S ABSTRACT
PAPER 9. 3. EXCHANGE OF STEAM GENERATORS IN PRESSURIZED WATE R REACTOR POWER PLANT S C. Hillrichs, Dipl.-Ing. (FH ) Siemens AG, KWU, Erlangen, West Germany) ABSTRACT As a result of problems experienced
Advanced Construction Methods for New Nuclear Power Plants
Advanced Construction Methods for New Nuclear Power Plants A. Introduction Relative to coal fired and natural gas fired power plants, nuclear power plants are more expensive to build but less expensive
HOISTING AND TRANSFER EQUIPMENT OF A NUCLEAR FACILITY
HOISTING AND TRANSFER EQUIPMENT OF A NUCLEAR FACILITY 1 Introduction 5 2 Scope of application 6 3 Equipment requirement specifications for hoisting device units 7 4 Manufacturer 7 4.1 General 7 4.2 Obligations
Decommissioning situation of Nuclear Power Plant in Japan
Decommissioning situation of Nuclear Power Plant in Japan April, 2015 The Japan Atomic Power Co. The Kansai Electric Power Co., Inc. General Description 1 Operational years of commercial NPP in Japan 40
CLASSIFICATION SYSTEM BY FIELD AND SUB-FIELD OF EXPERTISE SUPPLIERS REGISTRY OF GOODS AND SERVICES ENAP GROUP OF COMPANIES I. Suppliers are classified in three groups: Classification Equipments, materials
Solutions for nuclear technology
Solutions for nuclear technology Corrosion resistant pipes Clad pipes Special pipes and components ready for installation Prefabricated piping / spools Vessels, tanks and columns Assemblies 2 NUCLEAR TECHNOLOGY
How To Clean Up A Reactor Water Cleanup
General Electric Systems Technology Manual Chapter 2.8 Reactor Water Cleanup System TABLE OF CONTENTS 2.8 REACTOR CLEANUP SYSTEM... 1 2.8.1 Introduction... 2 2.8.2 System Description... 2 2.8.3 Component
Course available 24/7 for up to six months from the date of purchase or until completion
SPED ONLINE COURSE TRAINING Piper BootCamp and Process Plant Layout BOTH Piper BootCamp and Process Plant Layout online courses contain: Approximately 25 hours of online videos Printable notes Links to
APPENDIX B SUPPLEMENTAL INSPECTION PROGRAM A. OBJECTIVES AND PHILOSOPHY OF THE SUPPLEMENTAL INSPECTION PROGRAM
APPENDIX B SUPPLEMENTAL INSPECTION PROGRAM A. OBJECTIVES AND PHILOSOPHY OF THE SUPPLEMENTAL INSPECTION PROGRAM The supplemental inspection program is designed to support the NRC s goals of maintaining
Published in the Official State Gazette (BOE) number 166 of July 10th 2009 [1]
![Published in the Official State Gazette (BOE) number 166 of July 10th 2009 [1]](/thumbs/22/1436302.jpg "Published in the Official State Gazette (BOE) number 166 of July 10th 2009 [1]")
Nuclear Safety Council Instruction number IS-22, of July 1st 2009, on safety requirements for the management of ageing and long-term operation of nuclear power plants Published in the Official State Gazette
Heat Exchanger Thin Film Foul Release Applications Corrosion Resistant Protective Coatings Grit Blast Surface Prep of Tubular Equipment
Heat Exchanger Thin Film Foul Release Applications Corrosion Resistant Protective Coatings Grit Blast Surface Prep of Tubular Equipment Non-Destructive Examination Heat Exchanger Mechanical Repair Services
The World Nuclear Supply
The World Nuclear Supply Chain An Overview Greg KASER Staff Director NEA International WPNE Workshop Paris 11 March 2014 Outline of Presentation 1. About WNA 2. Value of: New construction Early dismantlement
www.steelformcatering.com
www.steelformcatering.com catering cat e r i n g We are specialized in the production and sub furniture of components for mechanical industry, sector for which we even furnish advice and collaborate in
STEAM STERILIZERS FOR THE LIFE SCIENCES MADE IN THE USA
STEAM STERILIZERS FOR THE LIFE SCIENCES MADE IN THE USA We Listen to Your Needs For over 35 years R-V Industries, Inc. has partnered our engineering and manufacturing expertise with customer ideas to produce
CITY OF LOS ANGELES PERSONNEL DEPARTMENT CAREER OPPORTUNITIES FOR MECHANICAL HELPER
CITY OF LOS ANGELES PERSONNEL DEPARTMENT CAREER OPPORTUNITIES FOR MECHANICAL HELPER This information is being given to you to describe potential opportunities as a Helper. The career ladders that Helpers
QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE
QUALITY ENGINEERING & SERVICES W.L.L (A DIVISION OF QUALITY GROUP OF COMPANIES) ISO 9001 : 2008 CERTIFIED COMPANY COMPANY PROFILE FABRICATION, MACHINING, METAL CASTING, LOAD TESTING, SAND BLASTING & PAINTING,
ASME QRO Certification Program
ASME QRO Certification Program ASME QRO Certification For Operators of Resource Recovery Facilities Applicant Information Table of Contents Table of Contents Page QRO Certification Overview...1 Types of
Office for Nuclear Regulation
ONR GUIDE CONTAINMENT: CHEMICAL PLANTS Document Type: Nuclear Safety Technical Assessment Guide Unique Document ID and Revision No: NS-TAST-GD-021 Revision 2 Date Issued: March 2013 Review Date: March
Nuclear Safety Council Instruction number IS- 23 on in-service inspection at nuclear power plants
Nuclear Safety Council Instruction number IS- 23 on in-service inspection at nuclear power plants Published in the Official State Gazette (BOE) No 283 of November 24 th 2009 Nuclear Safety Council Instruction
Qualification of In-service Inspections of NPP Primary Circuit Components
Qualification of In-service Inspections of NPP Primary Circuit Components ABSTRACT Matija Vavrouš, Marko Budimir INETEC Institute for nuclear technology Dolenica 28, 10250 Zagreb, Croatia [email protected],
Terms of Reference Air Handling Unit (HVAC System) Cleaning
Terms of Reference Air Handling Unit (HVAC System) Cleaning Introduction General cleaning of the air handling units is currently undertaken by the Mechanical Division staff composing of 3 personnel. Cleaning
BSL3 and BSL4 Autoclaves. Laboratory Line
BSL3 and BSL4 Autoclaves Laboratory Line BSL3 and BSL4 Autoclaves In today s society the need for safe bio-containment systems is increasingly important. This is especially true in the sterilization process
Installation and Service Instructions. Neutralization System Part no. 7441823 Grünbeck part no. 410480
Installation and Service Instructions for use by heating contractors Neutralization System Part no. 7441823 Grünbeck part no. 410480 Safety and Installation Requirements Please ensure that these instructions
IVISIONS STEAM PLANT DIVISIONS TOTAL TURNKEY SOLUTIONS. INDUSTRIAL BOILER & MECHANICAL
IVISIONS INDUSTRIAL BOILER & MECHANICAL STEAM PLANT DIVISIONS TOTAL TURNKEY SOLUTIONS. FIELD SERVICE & REPAIR DIVISION Rely on IB&M's field service experts for your steam plant. Our Field Service & Repair
Facility Support Services
Facility Support Services The Precision Group has a breadth of experience delivering innovative, first class facility support service solutions to clients across the public and private sectors. Our expert
German engineering under high pressure
German engineering under high pressure Over 25 years of experience as a manufacturer of sterilizers, autoclaves and lyophilization systems for laboratories, production and research Production-scale autoclaves
Non-Destructive Testing
Non-Destructive Testing Bureau Veritas is one of the largest Testing, Inspection and Certification service providers in the world. First established in 1828, Bureau Veritas now spans the globe with a network
ORC TURBOGENERATOR TYPE CHP - Organic Rankine Cycle Turbogenerator fed by thermal oil, for the combined production of electric energy and heat -
Doc. : 08C00031_e Date : 10.02.2009 Page : 1 / 9 ORC TURBOGENERATOR TYPE CHP - Organic Rankine Cycle Turbogenerator fed by thermal oil, for the combined production of electric - (Preliminary) Doc. : 08C00031_e
WASTE WATER TREATMENT for surface treatment applications
WASTE WATER TREATMENT for surface treatment applications Effluent an important cost factor Effluent cannot be avoided Water and compound are essential for vibratory mass finishing. During the finishing
James M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
PITTSBURG TANK AND TOWER CO., INC.
PITTSBURG TANK AND TOWER CO., INC. HEALTH, SAFETY & ENVIROMENTAL PROGRAM INDEX 1.SAFETY POLICY & MANAGEMENT RESPONSIBILITIES - Safety Policy - Administrative Duties * Top Management * Safety Director *
Engineered Solutions
Engineered Solutions Long established partnerships bring together the world s leading instrumentation companies within BKW. Our manufacturing facility enables us to quickly adapt standard instruments to
INSTRUMENTATION & CONTROLS VALVE & AUTOMATION EXPERTS VALVE REPAIR TUBE SERVICES
INSTRUMENTATION & CONTROLS VALVE & AUTOMATION EXPERTS VALVE REPAIR TUBE SERVICES GREAT PRODUCTS ARE ONLY PART OF OUR SUCCESS. YOU SHOULD MEET OUR PEOPLE. From the machinist with over 20 years experience
Three Mile Island Unit 2 Overview and Management Issues
Three Mile Island Unit 2 Overview and Management Issues OECD-Nuclear Energy Agency 12 th Meeting of the WPDD November 2011 Paris France Andrew P. Szilagyi U.S. Department of Energy Office of 1 Subjects
Information Technology Solutions
S AV E S M O N E Y Can reduce water consumption and waste disposal costs. Wastewater treatment with Vacuum Evaporation Systems Water treatment made easy! E NV IR O N ME NT F R IE N DLY Recycle water and
TYPICAL FIRE SAFETY INSPECTION VIOLATIONS
TYPICAL FIRE SAFETY INSPECTION VIOLATIONS The following is a list of typical violations often found by inspectors and a generic solution. You can use this list to improve the safety of your facility, to
VAD. Variable Area Desuperheaters
Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated
! WARNING. McDonnell & Miller Installation & Maintenance Instructions MM-217(I) Series 150S and 157S (Snap Switch, All Models except 157S-RB-P)
Series 150S and 157S (Snap Switch, All Models except 157S-RB-P) Low Water Cut-Off/Pump Controllers For Steam Boilers and Other Level Control Applications McDonnell & Miller Installation & Maintenance Instructions
Annex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Accreditation Nr: Address :Centrum İş Merkezi Aydınevler Sanayi Cad. No:3 Küçükyalı - Maltepe 34854 ISTANBUL / TURKEY Phone : +90 216 518
The Comprehensive Coatings Service Provider to Industry
Coating Systems Excellent Engineering Solutions The Comprehensive Coatings Service Provider to Industry 2 Coating Systems Weir Coatings specialises in the application of high performance protective linings
Public SUMMARY OF EU STRESS TEST FOR LOVIISA NUCLEAR POWER PLANT
1 (8) SUMMARY OF EU STRESS TEST FOR LOVIISA NUCLEAR POWER PLANT 1 LOVIISA NUCLEAR POWER PLANT Loviisa town is located approximately 90 km eastwards from Helsinki at the coast of Gulf of Finland. Loviisa
Vertical and Benchtop Autoclaves for Life Sciences. Laboratory Line
Vertical and Benchtop Autoclaves for Life Sciences Laboratory Line Designed for Your Laboratory Applications Advanced Laboratory Autoclaves Tuttnauer laboratory autoclaves have been designed to provide
10 Nuclear Power Reactors Figure 10.1
10 Nuclear Power Reactors Figure 10.1 89 10.1 What is a Nuclear Power Station? The purpose of a power station is to generate electricity safely reliably and economically. Figure 10.1 is the schematic of
JUBILEE TECHNICAL TRAINING CENTRE TAKORADI POLYTECHNIC 2015 TRAINING PROGRAMMES
JUBILEE TECHNICAL TRAINING CENTRE TAKORADI POLYTECHNIC 2015 TRAINING PROGRAMMES Main Courses Duration: 26 weeks 1. NVQ Level 2 Performing Process Operation in Replicating Environment 2. NVQ Level 2 Performing
Veenstra Group Your Partner
Mixing Technology Bulk Handling Specialist in Custommade Industrial Maintenance Off Shore Valves & Parts General Information Mixing Technology Bulk Handling Specialist in Custommade Industrial Maintenance
List of Frequently Utilized Storage Tank Standards and Practices
List of Frequently Utilized Storage Tank Standards and Practices Below is a list of frequently used storage tank standards and practices from organizations that are referenced in 25 PA Code, Chapter 245.
Hitachi s Involvement in Nuclear Power Plant Construction in Japan
Hitachi s Involvement in Nuclear Power Plant Construction in Japan 48 Hitachi s Involvement in Nuclear Power Plant Construction in Japan Naoki Kajiyama Kenji Hamamura Koichi Murayama OVERVIEW: To protect
Company Profile. New and overhauled Power Plants for sale
1 Company Profile New and overhauled Power Plants for sale - Combined Cycle - Gas & Steam Turbines - Gas & Diesel Engines - Wind Turbines & Green Energy - Coal fired Power & Waste to Energy - Biomass &
Static Electricity. A Health and Safety Guideline for Your Workplace. What Are Some Sources of Static Electricity? What is Static Electricity?
A Health and Safety Guideline for Your Workplace What is static electricity? What causes it? How is it hazardous? And, most importantly, how can it be controlled? All of these questions will be answered
Current state of plant Functioning as a peak and emergency centre. Statistics Accumulated operating hours:
Current state of plant Functioning as a peak and emergency centre Statistics Accumulated operating hours: D1-2-3-6-7: 43000 to 48000 hrs D4-5: 53000 to 57000 hrs D8: 33000 hrs Layout of the plant Index:
A Guide to Hazardous Substance Storage Capacity
New Jersey Department of Environmental Protection Bureau of Release Prevention A Guide to Hazardous Substance Storage Capacity August 7, 2014 Introduction The Spill Compensation and Control Act (the Spill
PARTNERS and RESPONSABILITIES
Location Key Facts Core Business Design and manufacture management of heavy machined steel structures and components for steel mill industry. Sales up to 40 MLN Staff 190 person Area of shops 35.000 m²
Notes. Material 1. Appropriate Flammable Liquids
29 CFR 1910.106 Flammable Materials Flammable Liquids Preparation 1. Read Applicable Background information and related Company Policy Chapter. 2. Make Copies of this Lesson Plan for Personnel 3. Make
Buildings Construction Procurement Strategy
Buildings Construction Procurement Strategy Graham Strickleton Site, Buildings and Power supplies Procurement Manager JOURNEE DEDIEE AUX INDUSTRIELS ET AUX MEMBRES DU RESEAU A.P.I Disclaimer: these slides
MEDICAL AIR STATIONS FOR MEDICAL GAS PIPING SYSTEM. Key features: NOVAIR quality and service: www.novairmedical.com
MEDICAL AIR STATIONS FOR MEDICAL GAS PIPING SYSTEM Designed for centralized medical air production in hospitals and clinics, NOVAIR medical air stations ensure the continuous supply of the medical gas
SECTION 11 78 13 MORTUARY REFRIGERATORS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 11 78 13 MORTUARY REFRIGERATORS SPEC WRITER NOTE: Delete between //---// if not applicable to project. Also delete any other item or paragraph not applicable in
Turnaround and Maintenance Services
Turnaround and Maintenance Services Reliably providing quality turnaround and maintenance services safely Matrix Safe a cultural mindset For us, safety is more than a core value. It s a way of life. We
WELDING TECHNOLOGY DEGREES AND CERTIFICATES. Welding Technology Degree. Shielded Metal Arc Plate and Pipe (270 hours) Certificate
Area: Technical Education Dean: Dr. Trish Caldwell Phone: (916) 484-8354 Counseling: (916) 484-8572 www.arc.losrios.edu/~welding/ The American Welding Society (AWS) nationally accredits American River
CONSTRUCTION EXPERIENCE FROM MODULAR NUCLEAR POWER PLANTS
CONSTRUCTION EXPERIENCE FROM MODULAR NUCLEAR POWER PLANTS Presented by W.J. (Chris) Zhang University of Saskatchewan Saskatoon, Canada Email: [email protected] Outline 1. Modularization in NPP 2. Comparison
11. Radioactive Waste Management AP1000 Design Control Document
11.4 Solid Waste Management The solid waste management system (WSS) is designed to collect and accumulate spent ion exchange resins and deep bed filtration media, spent filter cartridges, dry active wastes,
PBX Series Quick Fit Connector Bimetallic Steam Traps
6262100/6 IM-P626-01 ST Issue 6 PBX Series Quick Fit Connector Bimetallic Steam Traps Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning
Backup Fuel Oil System Decommissioning & Restoration Plan
Backup Fuel Oil System Page 1 of 19 Overview of Physical Fuel Oil System and Decommissioning Steps The fuel oil system at Milford Power consists of a number of subsystems. These include the following:
VAD Variable Area Desuperheaters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
SELF-INSPECTION PROGRAM FOR FIRE PROTECTION EQUIPMENT
SELF-INSPECTION PROGRAM FOR FIRE PROTECTION EQUIPMENT INTRODUCTION No matter how reliable fire protection equipment may seem, periodic maintenance is needed to ensure proper operation. Fire protection
Cyber Security Design Methodology for Nuclear Power Control & Protection Systems. By Majed Al Breiki Senior Instrumentation & Control Manager (ENEC)
Cyber Security Design Methodology for Nuclear Power Control & Protection Systems By Majed Al Breiki Senior Instrumentation & Control Manager (ENEC) 1. INTRODUCTION In today s world, cyber security is one
ALVERNIA UNIVERSITY OSHA REGULATION: 29 CFR 1910.252 WELDING, CUTTING, AND BRAZING ( HOT WORK ) SECTION: 3600
OSHA REGULATION: 9 CFR 90.5 WELDING, CUTTING, AND BRAZING ( HOT WORK ) A. POLICY. This procedure follows requirements set forth in 9 CFR 90.5.. This policy applies to all Hot Work operations being done
Using Robotics for Non-Destructive Examination & Characterization of. Hazardous Storage Tanks
Robotic End Effector For Inspection of Storage Tanks (FETC DE-AR21-93MC30363) Using Robotics for Non-Destructive Examination & Characterization of Hazardous Storage Tanks R. Beer ([email protected],
ABSTRACT. The Guidelines Section A is related to the general requirements of NSQ100 (Chapters 0, 1, 4, 5 and 6). Summary
Page 1 / 12 ABSTRACT This document is the Section A to NSQ-100 Guidelines. Its objective is to help to the understanding of NSQ-100 requirements through some examples or recommendations and descriptions
The integrity evaluation of the reactor building at unit4 in the Fukushima Daiichi nuclear power station
The integrity evaluation of the reactor building at unit4 in the Fukushima Daiichi nuclear power station May 2012 Government and TEPCO s Mid-to Long Term Countermeasure Meeting Management Council Outline
Olkiluoto 3 Project June 2010
Olkiluoto 3 Project June 2010 Author: R&S Communications Department, La Défense, France. The reproduction, transmission or use of this document or its contents is not permitted without express written
July 30, 2012 Nuclear Emergency Response Headquarters Government-TEPCO Med-and-long Term Response Council
Supplementary Document 1 Research and Development Road Map for Decommissioning Units 1 4 at TEPCO's Fukushima Daiichi Nuclear Power Plant July 30, 2012 Nuclear Emergency Response Headquarters Government-TEPCO
ENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING
ENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING MERSEN A world leader committed to Renewable Energies A world leading supplier of electrical protection, sealing,
Best Practices and Approaches to Supply Chain Management
Best Practices and Approaches to Supply Chain Management ATOMEX Forum 2012 Moscow 12.12. 14.12.2012 AF-Consult Switzerland Ltd Jan Kocourek 1 Objectives Provide information available regarding both the