MEDICAL AIR STATIONS FOR MEDICAL GAS PIPING SYSTEM. Key features: NOVAIR quality and service:

Transcription

1 MEDICAL AIR STATIONS FOR MEDICAL GAS PIPING SYSTEM Designed for centralized medical air production in hospitals and clinics, NOVAIR medical air stations ensure the continuous supply of the medical gas piping network. They comply with the most demanding quality standards and require very little maintenance. Key features: Medical Device CE class IIa Fully automatic operation Multiple configurations available Production of medical air compliant with EU Pharmacopeia NOVAIR quality and service: French manufacturing Quality management system certified ISO 9001 and ISO13485 Worldwide After Sales Service for startup and maintenance Spare parts available throughout the lifetime of the equipment

2 Medical Air Stations Technology & Design Novair supplies medical air stations to hospitals and clinics in France and around the world for over 35 years. They come in multiple configurations and various technologies to suit all healthcare facilities needs : Piston or screw type compressors Adsorption or refrigeration air dryers Compact horizontal: integrated on a receiver mounted frame Compact vertical: integrated on a vertical steel frame Modular: separated modules Medical quality, optimum security Medical air is a medical gas as defined by EN ISO standard. NOVAIR medical air stations are medical devices labeled "CE - Medical Device" Class IIa, according to the European Directive 93/42/EEC. They outreach the requirements of both French and European standards. CPU Controller Intelligent control NOVAIR medical air stations come with a CPU Controller, which ensures the alternate and balanced operation of each compressor. With advanced control and monitoring features, it allows the remote management and reporting of defaults, as well as the maintenance plan management. Low operation & maintenance costs Novair medical air stations are designed for an easy installation, commissioning and service: their configurations allow an optimal access to the various components and facilitates the technicians' intervention. Their control system ensuring the permutation of each compressor in the station is the guarantee of a long lifespan in intensive operation conditions, with the best energy efficiency. Available options Galvanized tank or other special treatment upon request Upgraded compressed air tank capacity and/or additional air tank Additional pressure sensor ready to be connected to the network Phamagas, medical gases analysis & monitoring device (CO/CO2, O2, NO/NO2, SO2) Dew point monitor Modular skid Container or cabin turnkey intergration Combined system with medical vacuum and / or medical oxygen production : 6, rue Paul Langevin Sevran - FRANCE : : : info@novairmedical.com

3 Medical Air Stations Exemple of configuration: horizontal double stations A choice of most efficient technologies Compression m Pistons type: oil lubricated or oil free compressors, delivered directly coupled to the motor, with inlet air filter and unload valve. l j k Piston compressors medical air station Oil lubricated screw type: delivered directly or belt coupled to the motor, with high efficiency separator, unload valve, sound insulation cover and integrated emergency control panel. m k Filtration A pre-filtration line, an air dryer module and an outlet filtration line are included as standard features. Single and duplex units are available (duplex units allow a continuous treatment). j Screw compressors medical air station j Air compressor k Compressed air steel receiver with automatic drain fully equipped with all control and security accessories. Horizontal, vertical, galvanized and high pressure versions available upon request. All receivers are delivered tested and certified. l CPU Controller m Medical air treatment line including: Pre-filtration line: - prefilter, dust filter. - oil filter Air dryer module. Final filtration line: - prefilter, dust filter; - CO/CO2 catalyzer filter; - activated carbon filter; - bacterial filter; Air treatment line control panel Air dryers Two technologies are available: Molecular sieve beds adsorption, allowing an output dew point of -50 C under pressure (medicinal air, European pharmacopeia). Refrigeration, allowing an output dew point of +3 C under pressure. Intelligent Monitoring Novair Medical CPU Controller device includes alarm reporting, maintenance plan management and automatic permutation between air compressors. "Ecostart" : this regeneration air management device greatly reduces the required compressed air regenerating flow, thus reducing compressors operation and maintenance costs. It comes as a standard feature with all air treatment lines. Air consumption for dryers regeneration can be controlled and adjusted automatically by the dew point level. : 6, rue Paul Langevin Sevran - FRANCE : : : info@novairmedical.com

4 Medical Air Stations Technical specifications Compressed air stations Technology Lubricated pistons Oil free pistons Lubricated screw Flow up to 56 m³/h up to 52 m³/h up to 978 m³/h Operating pressure 10 to 15 bar 10 bar 10 or 13 bar Motor power up to 7,5 kw up to 7,5 kw 5,5 to 110kW All compressors are available for 50Hz or 60Hz power supply Medical air treatment lines Technology Adsorption Refrigeration Air quality Dew point: -50 C (under pressure) Humidity < g/m³ CO < 5 ppmv CO2< 300 ppmv SO2 < ³ ppmv Oil < g/m³ O2 = 20.9% Dew point: +3 C (under pressure) CO < 5 ppmv CO2< 300 ppmv Oil < g/m³ O2 = 20.9% Treated flow 30 to 360 m³/h 20 to 360 m³/h Please contact us with any specific request. YOUR SALES REPRESENTATIVE : 6, rue Paul Langevin Sevran - FRANCE : : : info@novairmedical.com

5 MEDICAL VACUUM STATIONS FOR MEDICAL GAS PIPING SYSTEM Designed for a centralized vacuum production in hospitals and clinics, NOVAIR vacuum stations ensure the continuous supply of the medical gas piping system. Highly modular, they comply with the most demanding quality standards and require very little maintenance. Key features: Medical Device CE class IIa Fully automatic operation Multiple configurations available: horizontal, vertical, modular NOVAIR quality and service: French manufacturing Quality management system certified ISO 9001 and ISO13485 Worldwide After Sales Service for startup and maintenance Spare parts available throughout the lifetime of the equipment

6 Medical Vacuum Stations Technology & Design Novair supplies medical vacuum stations to hospitals and clinics in France and around the world for over 35 years. They come in various available configurations to suit the needs of all healthcare facilities : Compact horizontal: integrated on horizontal receiver Compact vertical: integrated on a vertical steel frame Modular: separated modules Skids and shelters, according to customers' specifications Medical quality, optimum security Vacuum, or medical aspiration, is a medical fluid as defined by EN ISO standard. NOVAIR medical vacuum stations are medical devices labeled "CE - Medical Device" class IIa, according to the European Directive 93/42/EEC. They outreach the requirements of both French and European standards. CPU Controller Intelligent monitoring NOVAIR medical vacuum stations come with a CPU Controller which ensures an alternate and balanced operation of each vacuum pump. With advanced control and monitoring features, it allows the remote management and reporting of defaults, as well as the maintenance plan management. Low operation & maintenance costs Novair vacuum stations are designed for an easy installation, commissioning and service: their configuration allow an optimal access to the various components and facilitates the technicians' intervention. Their control system ensuring the permutation of different pumps is the guarantee of a long lifespan in intensive operation conditions, with the best energy efficiency. Available options Galvanized tank or other special treatment upon request Upgraded vacuum tank capacity and/or additional vacuum tank Additional vacuum sensor ready to be connected to the network Single or duplex bacterial filtration line Drain jar to be connected to the station High capacity condensate jar Supervision system with touch screen Medical air and oxygen production Container or cabin turnkey intergration : 6, rue Paul Langevin Sevran - France : : : info@novairmedical.com

7 Medical Vacuum Stations Exemple of configuration: horizontal triplex station u w u y x v 1 - RT Vacuum pump 3 - CPU Controller 3 NOVAIR high efficiency RT vacuum pumps, with lubricated rotary vanes technology, mounted separately on a tank and provided with anti-vibration, non return valves, high efficiency separator, isolating valves and oil protection panel. Intelligent monitoring device including alarm reporting, maintenance plan management and automatic permutation between vacuum pumps. 2 - Tank 4 - Connections Horizontal tank, PED certified, stamped and painted in RAL 7035, featuring a vacuum sensor, a condensate drain valve, a stop valve and anti-vibrations mountings. Pipes and valves needed to connect equipments that make up the plant. 5 - Antibacterial filtration Each filter line comes with a translucent drain jar, a visible level antibacterial filter, and an isolation valve (by-pass). Available in single or double version. Installation and commissioning NOVAIR Medical provides a support for the implementation of the system according to the requirements of the EN ISO standard on medical vacuum systems. : 6, rue Paul Langevin Sevran - France : : : info@novairmedical.com

8 Medical Vacuum Stations 50 Hz Flow (m 3 /h) 60 Hz Medical vacuum station type Noise level (db(a)) 50 Hz 60 Hz Motor (s) power (kw) 50 Hz 60 Hz Feeding capacity Average data* (number of medical beds) RT 1000 RT 750 RT preset vacuum level: -600 / -900 mbar RT beds RT RT RT RT RT RT RT RT RT Horizontal configuration Vertical configuration Modular configuration Please contact us with any specific request. YOUR SALES REPRESENTATIVE : 6, rue Paul Langevin Sevran - France : : : info@novairmedical.com