INDUTHERM water chiller with 18 kw cooling capacity Item number

Transcription

1 INDUTHERM water chiller with 18 kw cooling capacity Item number cooling capacity available pressure storage tank capacity dimensions transport dimensions maximum ambient temperature electrical supply net weight transport weight 18.2 kw 5 bar 115 liters W 800 x D 1500 x H 1300 mm W 900 x D 1550 x H 1350 mm C 400V / 3phase, 50Hz, 5.6kW 215 kg 240 kg General Description This water chiller is a closed system with a storage tank, circulation pump, cooling system and temperature control. This water cooler can also cool down below room temperature. He is a strong pump supplied with 5 bar water pressure output. He is also with hose and fittings, supplied suitable for Indutherm machines. They parallel three VC 600 or CC / GC / VC use with this unit, The unit we delivered in a box on a wooden pallet. If you want a complete wooden box, which must be specified when ordering extra. In another supply voltage, the refrigeration system to another item number and a different price.

2 Technical Details housing Cladding panels made of treated steel sheet with powder coating in RAL Base frame in RAL cobalt blue 5013 th. Maintenance-friendly arrangement of the main components. refrigeration cycle In addition to the previously described components of the refrigeration cycle consists of: - TRV - Refrigerant sight glass - High pressure - Low pressure and fan pressure switch - High pressure and low pressure gauges refrigeration compressor Fully hermetic refrigeration compressor suction gas as a reciprocating compressor. Thermal overload protection of the compressor. air-cooled condenser Air-cooled, high range of seamless drawn copper refrigerant pipes and pressed pure aluminum fins. Protection against mechanical damage to the blades. Generous sizing of the condenser allows. Ambient temperatures up to + 40 C. vaporizer Evaporator as a high-performance heat exchangers for refrigerant / water from drawn. Copper refrigerant pipes and pressed pure aluminum fins. Freezing of the evaporator is not possible during operation.

3 storage tank The filling of the cooler is an integrated filling tank. This tank serves as an open expansion tank. Tank made of steel, optional stainless steel bar for pressures up to 6. Closed water circuits can be connected via a pressure control system with integrated filling-set. The tank top is a connection, including manual air vent and the bottom fitted with a drain tap. If desired, can also be supplied in stainless steel. water cycle The water cycle consists of a properly sized storage tank with an evaporator and a pump. Pressure of 5 bar pump guarantees a fixed bypass the smooth operation of the chiller at low water. control board Microprocessor - control via the display parameters on a symbolized display including double spaced function display all relevant components (compressor, fan and pump). The ease of use allows even experienced operators monitoring and modification of the parameters of the chiller. In addition, be carried out regardless of the custom setting additional control and monitoring functions (excerpt): - Measurement, display and any further processing of cold-water temperature - Indication and warning of any over-or undershooting of a predefined water temperature (upper and lower limit) - Alarm history on display, as well as 8 other functions Advantages of this water-cooler 30 years experience in the construction of water coolers The producer of water-cooler for 30 years successfully building water cooler. cost savings in operating costs Enclosed is a practical example calculation Indutherm currently pays 4.35 for 1 m³ (220 gal) water. A machine CC1000 requires approximately 4 liters per minute => for all-day use of 8 hours to cool consumption 1.92 m³ = 8,3 per day => at 200 working days 1660 in year. Power consumption (at a mean cycle 50%, pump and compressor 1kW 50% of 5kW) 8h = 3.5 kw * 28kWh * 0.18 Euro Cents = 5,04 per day = 1008 per year.

4 advantages of large energy storage tank Due to the large volume of the built-in storage tanks, a high temperature stability is guaranteed. external installation With the IP54 and the use of powder-coated, galvanized sheets, the outdoor installation of the cooler possible without additional protective measures such as roofing. low pressure loss By using a disk pack evaporator resulting pressure losses <0.1 bar. This results in a low power consumption of the pumps and thus a reduced release of heat into the cold water cycle, which in turn increases the available cooling capacity. modular If the cooler operated in a closed water cycle, one or more coolers are connected in parallel. This allows the redundant systems combined as required or as needed easily be extended. quick and easy maintenance Pump, electrical control cabinet and the refrigeration cycle with all relevant components are easily accessible in the front. Part of the device constructed. Ease of access reduces the time and thus the costs for Inspection and maintenance of the refrigeration unit. approved as all products and components Each radiator is individually tested in computer-controlled test booths. All devices are tested under normal operating conditions, measured temperature, pressure parameters, flow rate and power be. high-tech cooler, the result of extensive research and experience With the most modern, computer-assisted technique was to detail the components and production methods complete series optimized. The use of quality components from reputable manufacturers results in a Product that meets the highest requirements for reliability and service life.

5 guarantee and service Planning, construction, testing and servicing of products made on the basis of the quality system. Since July 1996 the quality system is certified according to ISO 9001 by the CA. An important role in supporting the customer plays the tight service network and comprehensive knowledge of the maintenance staff. Very short response time combined with high efficiency are natural for us.