CS AluJambs are a high quality pre-finished aluminium jamb product. Door jambs are supplied pre-hung or loose, ready for installation.

Transcription

1 CS AluJambs are a pre-finished aluminium hinged door jamb. Available in either an anodised or powder coated finish, the CS AluJambs system sets new architectural standards for both form and function. These stylish jamb sets are designed to complement the CS AluSealed aluminium cavity slider jamb profiles. They are ideal for a range of applications from residential through to commercial and industrial (i.e. office fit-outs or hospitals) and are suitable for both internal and external use. CS AluJambs are a high quality pre-finished aluminium jamb product. Door jambs are supplied pre-hung or loose, ready for installation. Both timber doors and the CS DoorLeaves range of aluminium doors can be pre-hung in the jamb system. - CS AluJambs with -Lite CS NewYorker door. Another quality product from:

2 Hang in there! Design Features & Options Designed to complement the CS AluSealed aluminium cavity slider jamb profiles as a complete fit-out solution. Available in standard sizes or can be made to order up to 000mm in height. Once installed, there are no visible fixings. Wool-pile brush seals are fitted to jambs as standard. Jambs have a grooved profile that suits 70mm or 90mm stud with mm linings. Can be pre-finished in a range of colours, powder coated or anodised. Can be specified with almost any choice of door up to 0mm thick, including our aluminium CS NewYorker and CS AluTec doors. All aluminium components screwed together for strength and reliability. Supplied ready for installation. Suitable for internal or external situations. - CS AluJambs in natural anodised finish with matching CS NewYorker door. - Powder coated CS AluJambs hung with matching CS AluLite powder coated aluminium doors.

3 Why specify CS Pre-HungJambs? Quality Our aim is to make the best quality door products. Therefore, every component is uniquely designed with this in mind. Technology & Innovation Our engineers focus on constantly developing new products and refining existing ones. That s why our products come with a number of unique features. A few exclusive CS Pre-HungJambs features (refer to pics on left): Machined fixing blocks ensure a reliable hinging point. All jamb corners are mitred and screwed together. We re Local 5 Service CS FOR DOORS is 00% New Zealand owned & our products are 00% New Zealand Made. The only New Zealand manufacturer of cavity sliders to have NZ covered with branches. All branches offer a free site measure & quote. 5 Stainless steel Hirline hinge reduces need to rebate hinge into doors. Woolpile seals fitted to door stops as standard. Clip in door stop covers all visible jamb fixings. Sturdy jamb profile ensures a neat finish that is extremely hard wearing. Product Range We have over 50 standard products. If you require a custom solution we can make to order. Our Guarantee * Guarantee conditions apply. Contact CS FOR DOORS for details. Come see our door systems at CS FOR DOORS NZIA Award winning Head Office & Showroom. Check out the full range of products and use our on-line calculator at:

4 All copyright and other property in this document is reserved by Cavity Sliders Limited. Details and specifications are subject to change without notice. Whilst all care is taken to ensure the accuracy of all information, no responsibility will be accepted for any errors or omissions. CS FOR DOORS and CS Cavity Sliders are Registered Trademarks. New Zealand Patent No: 588. Cavity Sliders Limited. CS ALUJAMBS (O.D. 00) Technical Information How to specify (example) Product: ~ CS AluJambs by CS FOR DOORS Location: ~ D Door leaf dimensions: ~ 00 x 80 Door type: ~ CS NewYorker Door finish: ~ P/C with clear glass Single or Double: ~ Single Jamb finish: ~ Aluminium Powder Coated Framing size: ~ 90mm stud Wall lining thickness: ~ mm Handle type: ~ Legge 700 Series Key Locking Full specifications are available on Drawing (CAD) Plan view Fixing detail (90/) 90 Timber framing Door leaf (CS AluTec shown) max mm thick mm lining Clip in door stop covers visible installation fixings One piece jamb for strength and finishing detail Packer Drawings are not to scale. All dimensions in mm. Cavity Sliders Limited Auckland Head Office 5-7 Rakino Way Mt Wellington PO Box 9, Penrose Auckland, NZ T F info@csfordoors.co.nz S/Steel Hirline hinge Minimum per door Bay of Plenty / Waikato 0 Newton Street Mt Maunganui Cavity Sliders Limited T F salesbop@csfordoors.co.nz Useful formulas (on-line ) Dimension Required Single Bi-Parting Trim height* DH + 9 DH + 9 Trim width DW + 85 (DWx) + 89 Clear walk through DW - 8 (DWx) - 9 Distance over jambs (Grvd) DW + 70 (DWx) +7 Floor to top of head (Grvd)* DH + 59 DH + 59 Floor to underside of head* DH + 8 DH + 8 DH = Door Height DW = Door Width * = All height dimensions allow for under door clearance of 5mm Note: All dimensions are in millimetres Detail Options Hardware Options CS FOR DOORS can factory fit the Legge 990 range of mortice locks for flush timber and aluminium doors. The 995 Mortice lock is recommended for CS NewYorker DoorLeaves. Standard CS AluJambs Features Trim height Trim width Lintel (part of wall framing). Jack stud (part of wall framing) One piece jamb For strength. Mitred corners ensure good looks. Jamb profile Matches other CS products for continuity of detail Hirline hinges Reduce the need to rebate hinges into doors. Stainless steel finish ensures long lasting quality. Under door clearance Set at 5mm as standard. This may be reduced by fitting a taller door or shortening the length of the vertical jambs. info@csfordoors.co.nz Wellington Grenada Business Park Jamaica Drive Grenada North T F saleswgtn@csfordoors.co.nz 9 Check out our detail options in more detail online: 7 LEGGE 990 Series 8 9 LEGGE 995 Series Cavity Sliders Limited Lockset on CS AluTec doorleaf (Legge 700 series shown) Most common 5mm face-plate locksets will suit fitting to this door. All hardware must be factory fitted. Christchurch Marylands Place, Middleton T F saleschch@csfordoors.co.nz

5 Customer Information Sheet Pre-finished Aluminium Products Introduction Many aluminium products that are used in the building industry have a finish applied that both protects the original mill finish and enhances the finished look. This data sheet provides information on colour choice, care and maintenance, precautions and limitations and transportation of CS FOR DOORS product that may be powder coated or anodised. Affected CS Products CavitySliders with aluminium jambs Pre-HungJambs - aluminium jambs WardrobeSliders with aluminium jambs DoorLeaves: NewYorker, AluLite, AluTec, AluMax, MirrorLite TrackSystems GateSystems CaviLock handles (CL00) Powder coating What is powder coating? Powder coating is a type of finish that is applied as a free-flowing, dry powder. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a skin. Once cured, the powder creates a hard, durable finish. Colour choice and finish Powder coating enables you to choose from a wide range of colours. CS FOR DOORS recommends the Dulux Powder Colour Chart for colour choice. When deciding on a colour option, the name and associated code number must be provided. If a colour is supplied outside of this chart a colour sample, name and code must be provided to a CS FOR DOORS representative to obtain a matching colour option and price. Things to be aware of: Light colours will tend to retain their appearance better than dark or bright colours. Surface finishes will vary according to the shape of aluminium the powder is applied to. Aluminium sheet and extrusions may have an orange peel look to the surface finish. This is considered acceptable as a part of industry standards. Metallic colours also require a second protective clear coat. A close up example of orange peel look Finished product may have minor surface scratches and abrasions which are accepted as a part of the application process. When judging colour consistency and integrity of finish, the accepted industry standard is inspection from a distance of two metres. Graffiti removal Anti graffiti powder coatings require specific cleaning procedures that must be adhered to. Solvents recommended for graffiti removal are Dulon AAA thinners. Apply the solvent with a soft clean rag. Allow the solvent to moisten the graffiti marks for approximately 0 seconds (but no longer than 0 seconds) before wiping the surface clean. Then, using a soft clean cloth and a mild detergent in warm water, clean the powder coating to remove any remaining thinners. Rinse after cleaning with fresh water to remove any remaining detergent. Please note: where solvents have been used to remove graffiti, you may notice a dull finish to the affected area. Advantages of powder coating Wide choice of colours available. Powder coating is a tough, durable finish. Minor scratches may be repaired. Aerosol and dab stick applicators for unintentional chips are available from your supplier in most stock colors. It is recommended however that the use of these products be restricted to minor areas. Disadvantages of powder coating Over the long term, powder coat colours will slowly degrade. Anodising What is anodising? Anodising is an electrochemical process that creates a protective layer on the surface of aluminium profiles. The metallic finish that is created does not peel, chip or flake and achieves good protection against heat, moisture, sunlight and atmospheric corrosion. Colour choice and finish Natural Anodised (also known as Matt Natural or Silver) is the most common colour, although black and bronze are also available. CS FOR DOORS will not anodise our flush aluminium door range due to imperfections in the aluminium sheet being magnified by the anodising process. Data Sheet - Aluminium Finishes

6 Things to be aware of: Variability of colour Extrusion die lines Visible aluminium grain These are all common features that are a part of the anodising process and are not defects in the surface finish. The standard layer thickness is microns but in exposed coastal or industrial environments thickness options of 0 and microns are advised. All copyright and other property in this document is reserved by Cavity Sliders Limited. Details and specifications are subject to change without notice. Whilst all care is taken to ensure the accuracy of all information, no responsibility will be accepted for any errors or omissions. CS FOR DOORS is a Registered Trademark. When judging colour consistency and integrity of finish, the accepted industry standard is inspection from a distance of two metres. (Close up) (m distance) Photos of die lines that may be visible with an anodised finish, taken from close-up and two metres away. Advantages of anodising Anodising enhances aluminium s appearance. Metallic finish does not peel, chip or flake. Provides good protection against heat, moisture, sunlight and atmospheric corrosion. Recommended for use in coastal areas (at microns). Disadvantages of anodising Limited colour range Although anodised finishes are very tough, once scratched they are virtually impossible to repair. General Information Joins in flush aluminium doors Some flush skinned aluminium doors will require a join where stock sheets will not cover the entire door frame. The standard detail for this join is to bring the sheets to within x rivet stem distance apart (.5mm) to create a neat negative detail that gives a consistent finish. This join will typically run vertically up the door in the centre. Any door requested over 000mm x 000mm will require a join due to the maximum size of sheet that we can supply. A CAD drawing will be supplied for any door over this size for customer sign off as a part of order acceptance. Bay of Plenty / Waikato T F Christchurch T F Sheets are joined with a gap of.5mm (approx. rivet stem) running vertically up the door. The gap is finished to a colour that best matches the sheet colour. Transportation CS FOR DOORS provides a damage warning on all easily damaged product. This states that: We have a Photo Reference of the door prior to it leaving our production facility. Product must be handled very carefully during transit It is the responsibility of the customer to unwrap and check the condition of the door once received. Once a product arrives at the customer destination, it is then their responsibility to check that the product is inspected and the delivery docket is signed before the transport company driver leaves the site. CS FOR DOORS will accept no responsibility for damage to a product once it has been delivered and the delivery docket signed. Installation Care During installation construction, the pre finished surface should be protected from damage by subcontractors and site works during construction. Once installed and finished, maintaining the initial appearance is a simple matter. The dirt and grime which builds up on surfaces over time contains moisture and salts which can adversely affect pre-finished surfaces and must be removed. Maintenance Pre-finished items should be cleaned regularly (at least once every months in interior applications and more often in industrial or exterior environments) with a dilute solution of mild, neutral liquid detergent, e.g., dish washing detergent, warm water (0 C), and a soft, lint free cloth or brush. Do not use abrasive cleaning tools such as steel wool, hard brushes, abrasive scourers, etc., as these may damage the coating surface and change the colour or gloss levels of the finish. Rinse suds off thoroughly with fresh water and dry with a clean cloth. It is vital that any other chemicals such as petrol, strong alkalines or acids are NOT used on any prefinished surface. Pre-finished items that are maintained regularly should retain their good looks. They will not crack, chip or peel as with conventional finishes. Wellington T F Auckland Head Office T F Pre-Finished Aluminium Products 0.0