CP 130-LS - 750PA TOGETHER FOR BETTER

Transcription

1 CP 130-LS - 750PA TOGETHER FOR BETTER 1

2 Context Insight The world is your wallpaper - extend your living room with the outside, wherever you live: high apartments, in the mountains or at coastal areas... Architectural trend: indoor and outdoor are integrated. Boundaries disappear. Contemporary (living) spaces can benefit from large sliding elements: they create a visual extension to the outdoors, a sense of space and allow lots of light to enter. Sliding systems are used more frequently in apartment buildings. Promise By adding additional components to our proven CP 130 Lift & slide concept, higher water tightness performances of up to 750Pa and a wind load resistance of up to class C4 (1600Pa) are achieved. 2

3 Subject of the launch By adding additional components to our proven CP 130-LS concept, higher water tightness performances of up to 750Pa and a wind load resistance of class C4 (1600Pa) are achieved. This solution is available for the Lift & Slide. New components: New bottom profiles Sealing piece between bottom frame and midsection End piece between bottom profile and side profiles Combined with existing components CP 130 system Other systems Supported Additional catalogue pages Integrated in ReynaPro 3

4 Benefits Fabricators Architects Easy to sell and implement extension of a known system with limited logistical impact Limited set of new articles, added to the standard CP 130-LS No new investments in tooling Limited additional cost Extend possible use of a proven system Coastal areas Higher areas High constructions User Ultimate comfort, wherever you live... Very good performance on AWW. Good thermal performance 4

5 TECHNICAL INFORMATION

6 Target Better performances, while keeping in mind the accessibility (threshold height) Minimum 750Pa water Keep out as much water as possible (reduce the need for drainage) Extend possible use (marine areas, high rise buildings, ) Keep as much standard CP 130-LS components (profiles and accessories) as possible Keep additional cost low for this solution Easier to sell and implement this extension New components are limited to: New bottom profile (multiple components) with 2 levels Sealing piece between bottom frame and midsection (epdm + foam) End piece between bottom profile and side profiles (similar to existing concept, different shape) 6

7 Concept Cascade principle Bottom frame in 2 levels Fixed vent always on the outside (Low level) Sliding vent always on the inside (High level) Threshold of +/- 9mm keeps more water out Sloped cover (3 ) evacuates water better Siliconized glazing (No dry glazing) 3 7

8 Components Bottom frame profile XX PVC profiles EPDM+foam (DIN R) (DIN L) 8

9 Components Water/wind barrier below the midsection Combination of EPDM and foam Separates inside and outside environment(placed between PVC profiles) Only on bottom frame DIN L and DIN R available Extruded foam 9

10 Components Cover profile (sliding vent) XX + existing gasket (NO screws) Support profile (fixed vent) XX + existing gasket (+ screws) Existing gasket (fixed vent)

11 Components Existing gasket (Replaces ) Existing reinforcement profiles (increased resistance wind load) XX New milling on existing midsection cover XX 11

12 Components New end pieces to connect bottom frame to side frame Same concept as standard CP 130-LS DIN L and DIN R available as a set:

13 Technical information Complete assembly (without the end pieces) 13

14 Technical information Configurations 14

15 Technical information Overview section standard CP 130-LS vs 750 Pa Vertical sections bottom FIXED VENT CP 130-LS CP 130-LS 750Pa 15

16 Technical information Overview section standard CP 130-LS vs 750 Pa Vertical sections bottom SLIDING VENT CP 130-LS CP 130-LS 750Pa 16

17 Drainage Fixed vent Fixed vent drainage equal pressure from sliding side to sliding side 17

18 Drainage Sliding vent cascade principle Inside pressure vs. Outside pressure drainage cap + membrane: to fixed side from fixed side Drainage can be facilitated by boring jig (CF 68) 18

19 TEST RESULTS Performances tabel CP 130-LS dimensions Results EN Standard XQ (monorail) 2992 x 2683 Air: class 4 (600 Pa) Wind: class B3 (1200 Pa) Water: class 7A (300 Pa) (class 8A for XQ-2-rail: 450Pa) Burglar proof: WK2 (Official report ) 750Pa XQ (2-rail) 2992 x 2500 Air: class 4 (600 Pa) Wind: class C4 (1600 Pa) Water: class 750A (750 Pa) Burglar proof: RC2 (conformity under investigation) (Official Report ) 19

20 TEST RESULTS Performances tabel CP 130-LS Standard XQ (2-rail) 750Pa XQ (2-rail) Uf value (W/m².K) B-B bottom Section (115) C-C bottom Section (116) Midsection (reinforced) (2) Sliding side Section (101) Fixed side Section (103) B-B top Section (111) C-C top Section (112) B-B bottom Section (115) C-C bottom Section (116) Midsection (reinforced) (2) Sliding side Section (101) Fixed side Section (103) B-B top Section (111) C-C top Section (112)