TRI CLAMP PRESSURE REGULATORS

Transcription

1 Strada dei Boschi, Villasanta (MB) Italia tel TRI CLAMP PRESSURE REGULATORS Stainless steel AISI 316L pressure regulators with clamp connections, suitable for compressed air, gas and liquid FEATURES Pressure regulator for inlet pressure up to 25 bar (362 psi) Clamp connections DIN welded to the body: 1/2"; 3/4"; 1 ; 1 1/2. Outlet pressure is controlled by a piston. Electropolished body. Ra 0,4 µm (16 µin) roughness on inside wetted surfaces. Available the ATEX 2014/34/EU version. Brand II2GcIICTX II2DcIIICTX. For use in potentially explosive atmospheres zones: 1, 21, 2, 22 (not applicable in mines and zone 0). Available the EAC TP TC 032/2013 or EAC- EX TP TC 012/2011 versions for the Russian market. The product complies with the directive 2014/68/EU PED.

2 SPECIFICATIONS 1/2" and 3/4" pressure regulator weight ~1,56 Kg (~3,4 lb) 1" and 1 1/2 pressure regulator weight ~10,2 Kg (~22,5 lb) Operating temperature: -40 C +175 C (-40 F +347 F) Suitable for steam service Main valve leakage classification: VI (bubble tight) Flow coefficient: Kv= 1,2 Nm³/h Cv = 1,4 US gal/min for 1/2 and 3/4" version Flow coefficient: Kv= 11 Nm³/h Cv = 12,8 US gal/min for 1 and 1 1/2 version Degree of protection: IP25 All metallic parts are machined from the solid bar. No threaded connections exposed to the fluid MATERIALS Body and bonnet: stainless steel AISI 316L Internal parts: stainless steel AISI 316L Main valve spring: stainless steel AISI 302 (not in contact with the fluid) Adjusting spring: C85 nickel-plated NiP/Fe 15 μm (not in contact with the fluid) Piston: stainless steel AISI 316L Gaskets: EPDM or EPDM in accordance to FDA (other compounds available on request) SPARE PARTS Complete kit: complete main valve, o-rings Copyright ID Insert Deal S.r.l. - All rights reserved 2

3 flow charts 7 1" TRI CLAMP REGULATOR Pout 0,8 8 bar -Pin=10 bar -Aria/Air Outlet pressure [bar] Flow rate [Nm^3/h] 9 1/2" TRI CLAMP REGULATOR Pout 0,8 8 bar Pin=10 bar Aria/air Outlet pressure [bar] Flow rate [Nm3/h] Limite consigliato di portata/recommended flow limit Copyright ID Insert Deal S.r.l. - All rights reserved 3

4 generating the product code TRI CLAMP PRESSURE REGILATOR AISI 316 L AA BB CC DD EE FF AA Attacchi / Connections 9C DIN /2" 9C DIN /4" 9E DIN " 9F DIN " 1/2" BB Pressione d'ingresso / Inlet pressure C1 25 bar CC Intervallo d'uscita/ Outlet range A0 Pout 0,2-1,5 bar B0 Pout 0,3-3 bar D0 Pout 0,8-8 bar DD Tipologia di fluido / Fluid type 98 EPDM 99 FPM EE Marchiato / Marked I0 ID Z0 Dir ATEX 2014/34/UE FF Accessori/Accessories 00 Nessun accessorio 02 OR FPM, ( ) C 16 O-Ring FDA CODE COMPOSITION EXAMPLE 3TCR2#9E C1 D0 98 I0 00 3TCR2#: Pressure regulator clamp connection 9E: DIN connections C1: maximum inlet pressure 25 bar D0: outlet pressure range 0,8-8 bar 98: EPDM gaskets I0: ID 00: No accessories Copyright ID Insert Deal S.r.l. - All rights reserved 4

5 technical drawings (all dimensions in mm) PRESSURE REGULATOR CLAMP CONNECTIONS 1" 1 1/2" n129 ~75 D IN OUT ~326 IN/OUT L D 1" ~180 ±3 ø50.5 1"1/2 ~182 ±3 ø50.5 L ~65 *For pipe connection when required, random orientation Copyright ID Insert Deal S.r.l. - All rights reserved 5

6 technical drawings (all dimensions in mm) PRESSURE REGULATOR CLAMP CONNECTIONS 1/2" - 3/4" n83 ~57 D IN OUT ~182 M5* L n83 *For pipe connection when required, random orientation IN/OUT L D 1/2" 139±3 ø25 3/4" 142±3 ø25 Copyright ID Insert Deal S.r.l. - All rights reserved 6

7 ID Insert Deal Srl Strada dei Boschi, Villasanta (MB) Italia tel ID Insert Deal si riserva il diritto di cambiare le specifiche del prodotto senza preavviso. ID Insert Deal reserves the right to change and/or modify product specifications without prior notice. Insert Deal non si assume alcuna responsabilità per la scelta, uso e manutenzione di qualsiasi prodotto. La responsabilità per l idonea scelta, uso e manutenzione di qualsiasi prodotto ID rimane interamente a carico dell acquirente. Insert Deal does not assume responsibility for selection, use and maintenance of any products. Responsibility for proper selection, use and maintenance of any ID products remains entirely to the purchaser. Riproduzione vietata. Tutti i diritti riservati; nessuna parte del presente documento può essere riprodotta senza autorizzazione di ID Insert Deal Srl. Reproduction forbidden. All rights reserved; the hereby document can t be reproduced, also partially, without the authorization of ID Insert Deal Srl. PRESSURE REGULATOR_3TCR2_EN_03 Azienda con sistema di gestione qualità certificato. certificato N Company with certificated quality management system. certificate N Copyright ID Insert Deal S.r.l. - All rights reserved 7