NCA 16-4, 32-4 CHIP RESISTOR ARRAY (CONVEX TYPE)
|
|
|
- Cecilia Walker
- 7 years ago
- Views:
Transcription
1 NCA 16-4, 32-4 CHIP RESISTOR ARRAY (CONVEX TYPE) Applications Telecommunication Equipment Lap-Top and Note-Book Computer Dimensions (Unit: PCS) Number of A B C D E F Resistors ± 0.15 ± 0.2 ± 0.5 ± 0.15 ± 0.1 ± 0.15 NCA NCA Internal Circuit Characteristics Item NCA16 NCA32 Power Rating 1/10W 1/8W Max Working Voltage 50V 200V Resistance ± 5%(J) Resistance Range E-24 series (10 ohm~1m ohm) T. C. R. ± 200ppm/ C Number of Resistors 4 Operating Temp. Range 55 C~125 C Rating Temperature + 70 C Specifications Requirements Characteristics Test Method Short time Over-load ±(2% Ω) Rated Voltage x 2.5, 5 seconds Soldering Heat ±(1% Ω) 260 ± 5 C, 10 ± 1 seconds Temperature Cycling ±(1% Ω) 125 C (30min) normal (15min) 30 C (30min) normal (15min), 5cycles Moisture Load-Life ±(2% Ω) Rated Voltage, 40 ± 2 C, 90~95%RH, Load-Life ±(3% Ω) Rated Voltage, 70 ± 3 C, Part No. and NCA16 4 J No. of Resistor Resistance Example: (10K Ohm) 1
2 10 PIN/8R NCA SERIES CHIP RESISTOR NETWORKS Applications Telecommunication Equipment Lap-Top and Note-Book Computer NCA36 NCA12 Dimensions (Unit: mm) NCA12 NCA36 Internal Circuit NCA12 NCA36 Circuit Diagram Characteristics NCA12 NCA36 Power Rating (70 C) 1/32W 1/16W Max Working Voltage 25V 50V Resistance ± 5%(J) Resistance Range K ohm T. C. R. ± 200ppm/ C Number of Resistors 8 Operating Temp. Range 55 C~125 C Specifications Requirements Characteristics Test Method Short time Over-load ±(2% Ω) Rated Voltage x 2.5, 5 seconds Soldering Heat ±(1% Ω) 260 ± 5 C, 10 ± 1 seconds Temperature Cycling ±(1% Ω) 125 C (30min) normal (15min) 30 C (30min) normal (15min), 5cycles Moisture Load-Life ±(2% Ω) Rated Voltage, 40 ± 2 C, 90~95%RH, Load-Life ±(3% Ω) Rated Voltage, 70 ± 3 C, Part No. and NCA36 S J Packing NCA12 NCA36 (Unit: pcs) Circuit Resistance Example: (10K Ohm) Dots are indications of common pins for NCA-36 only Tape & Reel Paper 5,000 Plastic 4,000 Tape Width 8.0 ± 0.1 m/m 12.0 ± 0.1 m/m Bulk Pack 1,000 1,000 2
3 NCA 0402 X 4, 0402 X 2 THICK FILM CHIP RESISTOR ARRAY (CONVEX TYPE) Applications Telecommunication Equipment Lap-Top and Note-Book Computer Dimensions (Unit: PCS) Number of A B C D E F Resistors ± 0.1 ± 0.2 ± 0.1 ± 0.15 ± 0.1 ± 0.1 NCA Internal Circuit NCA04-4 NCA04-2 Characteristics Item NCA04-4 NCA04-2 Power Rating 1/16W Max Working Voltage 50V Resistance ± 5%(J), ± 1%(F) Resistance Range E-24 series (10 ohm~1m ohm) T. C. R. ± 200ppm/ C Number of Resistors 4 2 Operating Temp. Range 55 C~125 C Rating Temperature + 70 C Specifications Requirements Characteristics Test Method Short time Over-load ±(2% Ω) Rated Voltage x 2.5, 5 seconds Soldering Heat ±(1% Ω) 260 ± 5 C, 10 ± 1 seconds Temperature Cycling ±(1% Ω) 125 C (30min) normal (15min) 30 C (30min) normal (15min), 5cycles Moisture Load-Life ±(2% Ω) Rated Voltage, 40 ± 2 C, 90~95%RH, Load-Life ±(3% Ω) Rated Voltage, 70 ± 3 C, Part No. and NCA04 4 J No. of Resistor Example: (10K Ohm) for NCA 04-04, NCA04-2 No Working Resistance 3
4 NCB SERIES THICK FILM CHIP RESISTOR ARRAY (CONCAVE TYPE) Applications Telecommunication Equipment Lap-Top and Note-Book Computer Dimensions (Unit: PCS) Number of A B C D E F Resistors ± 0.15 ± 0.2 ± 0.5 ± 0.2 ± 0.15 ± 0.15 NCB NCB Internal Circuit Characteristics Item NCB16 Power Rating 1/16W Max Working Voltage 50V Resistance ± 5%(J), ± 1%(F) Resistance Range E-24 series (10 ohm~1m ohm) T. C. R. ± 200ppm/ C Number of Resistors 4 2 Operating Temp. Range 55 C~125 C Rating Temperature + 70 C Specifications Requirements Characteristics Test Method Short time Over-load ±(2% Ω) Rated Voltage x 2.5, 5 seconds Soldering Heat ±(1% Ω) 260 ± 5 C, 10 ± 1 seconds Temperature Cycling ±(1% Ω) 125 C (30min) normal (15min) 30 C (30min) normal (15min), 5cycles Moisture Load-Life ±(2% Ω) Rated Voltage, 40 ± 2 C, 90~95%RH, Load-Life ±(3% Ω) Rated Voltage, 70 ± 3 C, Part No. and NCB16 4 J No. of Resistor Resistance Example: (10K Ohm) 4
5 THICK FILM CHIP RESISTOR On a high grade ceramic body (aluminum oxide) a metal glaze layer is screened. Depending on the composition of the metal glaze different resistance values can be obtained. On both ends a contact is made in such a way that optimum solderability is guaranteed. This is achieved by applying three layers. The resistive layer is covered with a protective coat. Dimensions Features 1. Miniature size can compact P.C. Board. 2. 8mm tape carrier packaging available for automatic surface mounting. 3. Excellent mechanical strength and electrical stability. 4. Reduce assembly costs. Style Dimensions: mm L W a b T CR ± ± ± ± ± 0.03 CR ± ± ± ± ± 0.05 CR ± ± ± ± ± 0.05 CR ± ± ± ± ± 0.05 CR ± ± ± ± ± 0.05 CR ± ± ± ± ± 0.05 CR ± ± ± ± ± 0.05 CR ± ± ± ± ± 0.05 General Specification Style CR0201 CR0402 CR0603 CR0805 CR1206 CR1210 CR2010 CR Power 70 C 1/20W 1/16W 1/10W 1/8W 1/4W 1/3W 3/4W 1W Operating Temp. Range 55 C to C Derated to 0 Load at C Maximum Working Voltage 25V 50V 50V 150V 200V 200V 200V 200V Maximum Overload Voltage 50V 100V 100V 300V 400V 400V 400V 400V Resistance Range 1%, E Ω ~ 1M Ω 10 Ω ~ 1M Ω 10 Ω ~ 1M Ω 10 Ω ~ 1M Ω 10 Ω ~ 1M Ω 10 Ω ~ 1M Ω 10 Ω ~ 1M Ω 10 Ω ~ 1M Ω 5%, E Ω ~ 1M Ω 2 Ω ~ 5.6M Ω 1 Ω ~ 10M Ω 1 Ω ~ 10M Ω 1 Ω ~ 10M Ω 1 Ω ~ 10M Ω 1 Ω ~ 10M Ω 1 Ω ~ 10M Ω Zero Ohm jumper < 0.05 Ω ± 100ppm/ C 10 Ω ~ 1M Ω TCR ± 200ppm/ C 10 Ω ~ 1M Ω 10 Ω ~ 1M Ω 1Ω ~10 Ω >1M Ω ± 400ppm/ C 1 Ω ~ 1M Ω 5
6 Characteristics PERFORMANCE TEST TEST METHOD 1% TOLERANCE 5% TOLERANCE Temperature MIL-STD-202F, Method 304 Coefficient (by ) 55 C to C ± 100 ppm/ C ± 200 ppm/ C Thermal Shock MIL-STD-202F, Method cycles, 55 C to C ± (1.0% Ω) MIL-R-55342D, Para Low Temperature One hour at 65 C followed by Operation 45 minutes RCWV ± (1.0% Ω) Short Time Overload MIL-R-55342D, Para times RCWV for 5 seconds ± (1.0% Ω) ± (2.0% Ω) High Temperature MIL-R-55342D, Para C for 100 hours ± (1.0% Ω) ± (2.0% Ω) MIL-R-55342D, Para Resistance to Soldered to test board at 26 C Soldering Heat for 10 seconds ± (1.0% Ω) Moisture Resistance MIL-STD-202F, Method cycles. Total 240 hours. ± (2.0% Ω) Life MIL-STD-202F, Method 108A 100 hours at 70 C RWV intermittent ± (1.0% Ω) ± (3.0% Ω) Solderability MIL-STD-202F, Method C for 5 seconds 95%min. coverage 95%min. coverage Unit mounted in center mm Bending Strength board length, deflected 5mm in ± (1.0% Ω) ± (1.0% Ω) either direction for 10 seconds Parts Number System CR0805 F 1002 T1 LF Size CR0201(0201) CR1206(1206) CR0402(0402) CR1210(1210) CR0603(0603) CR2010(2010) CR0805(0805) CR2512(2512) F = ± 1% J = ± 5% D = ± 0.5% on request Resistance Value Please refer to marking explanation. 000=Jumper 0 ohm Standard Packaging T = See page 10 for plastic or paper tape 1 = 5K reels 2 = 10K reels 3 = 20K reels RoHS Blank = Non-RoHS Compliant LF = RoHS Compliant 5% marking Value = 10K Ω CR0603(0603) CR0805(0805) CR1206(1206) CR1210(1210) CR2010(2010) CR2512(2512) explanation 5% tolerance: 3 digits, first two digits are significant figures, third digit is number of zeros. Letter R is decimal point. 1% tolerance: 4 digits, first three digits are significant figures, Letter R is decimal point % marking Value = 10K Ω CR0805(0805) CR1206(1206) CR1210(1210) CR2010(2010) CR2512(2512) %: EIA-96 marking (see page 9) and 0402 no marking Paper tape 7 reel CR0201/0402: 10,000pcs CR0603/0805/1206/1210: 5,000pcs 6 10C 1% marking Value = 12.4K Ω CR0603(0603) EIA-96 marking Plastic tape per 7 reel RMC-22/24: 4,000pcs Bulk bag: 5,000 per plastic bag, 2 bags per box. Standard packaging is 8mm tape reel per EIA481. NO marking CR0402(0402) CR0201(0201)
7 THIN FILM CHIP RESISTORS Features 1. Low TCR 2. High precision (± 0.5up% up to ± 0.01%) 3. Low current noise 4. High stability Electrical Characteristics Style CRT0402 CRT0603 CRT0805 CRT1206 CRT1210 CRT2010 CRT Power 70 C 1/16W 1/16W 1/10W 1/8W 1/4W 1/2W 3/4W Operating Temp. Range 55 C ~ C Derated to 0 Load at C Maximum Working Voltage 25V 50V 100V 150V 150V 150V 150V Maximum Overload Voltage 100V 100V 200V 250V 300V 300V 300V Dielectric Withstanding Voltage 100V 100V 250V 250V 400V 400V 400V Resistance Range 10 Ω ~ 100K Ω 10 Ω ~ 330K Ω 10 Ω ~ 1M Ω 10 Ω ~ 1M Ω 10 Ω ~ 1M Ω 10 Ω ~ 1M Ω 10 Ω ~ 1M Ω Temperature Coefficient ± 10ppm/ C ; ± 15ppm/ C ; ± 25ppm/ C ; ± 50ppm/ C Environmental Characteristics PERFORMANCE TEST TEST METHOD RATING Temperature Coefficient (by ) MIL-STD-202F, Method C to +125 C ± 10 50ppm/ C Thermal Shock MIL-STD-202F, Method cycles, 55 C to +125 C Low Temperature Operation MIL-R-55342D, Para One hour at 55 C followed by 45 minutes RCWV Short Time Overload MIL-R-55342D, Para times RCWV for 5 seconds High Temperature Exposure MIL-R-55342D, Para C for 100 hours Resistance to Soldering Heat MIL-R-55342D, Para Soldered to test board at 260 C for 10 seconds Moisture Resistance MIL-STD-202F, Method cycles. Total 240 hours. Life MIL-STD-202F, Method 108A 1000 hours at 70 C RCWV intermittent Solderability MIL-STD-202F, Method C for 5 seconds 95% min. coverage Bending Strength Unit mounted in center of 90mm board length, deflected 5mm in either direction for 10 seconds 7
8 Dimensions Style Size Code L W T a b CRT ± ± ± ± ± 0.10 CRT ± ± ± ± ± 0.15 CRT ± ± ± ± ± 0.20 CRT ± ± ± ± ± 0.20 CRT ± ± ± ± ± 0.20 CRT ± ± ± ± ± 0.20 CRT ± ± ± ± ± 0.20 Unit: mm Parts Number System CRT DR E Resistance Value Packaging Codes TCR CRT0805 (0805) CRT0603 (0603) Please refer to marking explanation. D = ± 0.5% B = ± 0.1% C = ± 0.25% R = Paper tape reel K = Embossed plastic tape reel Please refer to packaging explanation. T = ± 10ppm/ C E = ± 25ppm/ C C = ± 50ppm/ C 5% marking Value = 10K Ω CRT0603(0603) CRT0805(0805) CRT1206(1206) CRT1210(1210) CRT2010(2010) CRT2512(2512) % marking Value = 10K Ω CRT0805(0805) CRT1206(1206) CRT1210(1210) CRT2010(2010) CRT2512(2512) 10C 1% marking Value = 12.4K Ω CRT0603(0603) EIA-96 marking NO marking CRT0402 explanation 5% tolerance: 3 digits, first two digits are significant figures, third digit is number of zeros. Letter R is decimal point. 1% tolerance: 4 digits, first three digits are significant figures, Letter R is decimal point %: EIA-96 marking (see page 9) 0402 no marking 8
9 EIA-96 code R Value code R Value code R Value code R Value code R Value code R Value code R Value code R Value This table shows the first two digits for the three-digit EIA-96 part marking scheme. The third character is a letter multiplier: Y=10 2 X=10 1 A=10 0 B=10 1 C=10 2 D=10 3 E=10 4 F=10 5 Tape Dimensions Unit: mm Dimension A B W E F T1 T2 P D CR ± ± ± ± ± ± ± ± 0.05 CR ±.1.65 ± ± ± ± ± ± ±.1/-0 CR ± ± ± ± ± ± ± ±.1/-0 CR ± ± ± ± ± ± ± ± ±.1/-0 CR ± ± ± ± ± ± ± ± ±.1/-0 CR ± ± ± ± ± ± ± ± ±.1/-0 CR ± ± ± ± ± ± ± ±.1/-0 CR ± ± ± ± ± ± ± ±.1/-0 9
10 Paper Carrier Embossed Plastic Carrier Reel Dimensions Component/Reel A Paper (Max.) Plastic CR0201/0402 CR0603/0805/1206/1210 CR2010/ (178mm) 10,000 5,000 4, (254mm) 20,000 10, (330mm) 40,000 20,000 for CR1210/2010/2512 for CR1210/2010/
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
DATA SHEET CHIP RESISTORS RT Series 1%; 0.5%; 0.25%; 0.1%
DATA SHEET CHIP RESISTORS Series 1%; 0.5%; 0.25%; 0.1% Product specification Supersedes Date of Sep. 30, 2003 ynsc004 ynsc015 ynsc002 ynsc007 2 SCOPE This specification describes series chip resistors
Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard
Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n
Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 10 ASC_WR_V23 APR.- 2015
TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011
SIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant
Resistors SIL Resistor Network Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/005/ 1206/1210/121/2010/2512 Product specification August 22, 2014 V.0 Product specification 2 SCOPE This specification
DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free
DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/005/1206/2512 RoHS compliant & Halogen free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE
DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/122/124/162/164/248/324/158/358 TC: 122/124/164
Product specification December 11, 2015 V.2 0 DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/2/4/162/164/248/324/158/358 TC: 2/4/164 RoHS compliant Product specification 2 SCOPE This specification
Automotive and Anti-Sulfuration Chip Resistor 0402
The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% RoHS compliant & Halogen Free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes series chip
Metal Film Resistors, Industrial, Precision
CMF Industrial Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics
Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.
FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. APPLICATIONS Power supplies Printers Computers Battery chargers Automotive Converters CD-ROM. QUICK
SPECIFICATION FOR APPROVAL. Approved by
C O N F I D E N T I A L D O C U M E N T SPECIFICATION FOR APPROVAL CONRAD Description : Royalohm Part no.: 0402WGxxxxxTCE (RMC 1/16W (0402) +/- 1%, 5% & Jumper) 0603SAxxxxxT5E (RMC 1/10W-S (0603) +/- 1%,
High Power Thick Film Chip Resistor 2512
Specifications: Type : MCHP12 Power Rating at 70 C : 2W Working Voltage : 250V Max. Overload Voltage : 500V Max. Dielectric Withstanding Voltage : 500V Temperature Range : -55 C to +155 C Ambient Temperature
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7
ST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 8 4 7 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7 8 9!! 5 Part name Housing
Metal Film Resistors, Industrial, Precision
Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Available Excellent high frequency characteristics Exceptionally
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS RL-High power series 5%, 2%, 1% sizes 0805/1206
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS series 5%, 2%, 1% sizes 005/1206 RoHS compliant Product specification Aug 27, 200 V.2 Product specification 2 SCOPE This specification describes RL005/1206
50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
Power Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
Metal Film Resistors, Non-Magnetic, Industrial, Precision
Metal Film Resistors, Non-Magnetic, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics
Standard Thick Film Chip Resistors
Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free
Precision Surface Mount Resistors Wirewound or Metal Film Technologies
Precision Surface Mount Resists irewound Metal Film Technologies FEATURES Accding to CECC 40402-801 (wirewound) ide range of ohmic values (0.04 to 1 M) Low temperature coefficient (± 25 ppm/ C available)
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips thick film chip resistors are specially designed to meet the requirements of the ESA 4001/026 specification. They have undergone the
High-ohmic/high-voltage resistors
FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.
Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL
Metal Film Resistors, Military, Qualified, Precision, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient Flame retardant
High-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP
MDM (Military M831/1 and /2) Thick Film Resistor Networks, Military, MIL-PRF-831 Qualified, Type RZ1 and RZ2 Dual-In-Line, Molded DIP STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PIN NO. MIL STYLE
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
Power Dissipation Considerations in High Precision Vishay Sfernice Thin Film Chips Resistors and Arrays (P, PRA etc.) (High Temperature Applications)
VISHAY SFERNICE Resistive Products Application Note ABSTRACT On our thin film chips resistors and arrays the main path for the heat, more than 90 %, is conduction through the body of the component, the
FEATURES 200 % 175 % 150 % 125 % 100 % 75 % 50 % 25 %
Ultra High Precision Z-Foil Resistor with TCR of ± 0.05 ppm/ C, PCR of 5 ppm at Rated Power, Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 % INDUSTRY BREAKTHROUGH Any value at any tolerance
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
Part Marking Instructions Chip Resistors
Chip Resistors Part Marking Instructions Part Marking Instructions Chip Resistors 1% Marking The nominal resistance is marked on the surface of the overcoating with the use of 4 digit markings. 0201 and
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL
CMF (Military RN and RL) Metal Film Resistors, Military, Qualified, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient
High Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors
High Ohmic (up to 68 MΩ)/ A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to the end-caps.
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination
SMD PTC - Nickel Thin Film Linear Thermistors
SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage
Pulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors
AC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: Lowest ESR in Class Highest Working Voltage in class 250V Standard EIA Size: 0603 Laser Marking (Optional) RoHS Compliant High
Pulse Proof, High Power Thick Film Chip Resistors
Pulse Proof, High Power Thick Film Chip Resistors STANDARD ELTRICAL SPIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE U max. AC/DC -HP e3 FTURES Excellent
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry
Selection Guide for Conversion of Carbon Composition Resistors
Selection Guide for Conversion of Carbon Composition Resistors believes that the information described in this publication is accurate and reliable, and much care has been taken in its preparation. However,
Carbon Film Fixed Resistor Axial Leaded
Features Automatically insertable High quality performance Non-Flame type available Cost effective and commonly used Too low or too high values can be supplied on case to case basis Performance Specification
Metal Film Resistors, Industrial, Flameproof
End of Life - August 13 Metal Film Resistors, Industrial, Flameproof STANDARD ELECTRICAL SPECIFICATIONS FEATURES Small physical size Low cost resistors have the ability to withstand overloads up to times
MADP-000504-10720T. Non Magnetic MELF PIN Diode
MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description
0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
High Stability - High Temperature (230 C) Thin Film Wraparound Chip Resistors, Sulfur Resistant
High Stability - High Temperature (230 C) Thin Film Wraparound Chip Resistors, Sulfur Resistant INTRODUCTION For applications such as down hole applications, the need for parts able to withstand very severe
Types MC and MCN Multilayer RF Capacitors
High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged flexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Chip LED with Bi-Color (Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
Power Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series Non inductive Easy
SLLP-5630-150-G PRODUCT DATASHEET. RoHS Compliant
PRODUCT DATASHEET SLLP-5630-150-G Table of Contents Features... 1 Applications 1 Characteristics.. 1 Typical Electro optical Characteristics Curves... 3 Mechanical Dimensions... 4 Carrier Tape Dimensions.....
High Ohmic/High Voltage Metal Glaze Leaded Resistors
VR37 High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
NBB-402. RoHS Compliant & Pb-Free Product. Typical Applications
Typical Applications Narrow and Broadband Commercial and Military Radio Designs Linear and Saturated Amplifiers 0 RoHS Compliant & Pb-Free Product NBB-402 CASCADABLE BROADBAND GaAs MMIC AMPLIFIER DC TO
SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
High Surge Axial Cemented Wirewound Resistors
High Surge Axial Cemented Wirewound Resistors FEATURES High voltage surge (up to 12 kv) withstanding capability Non flammable silicon cement coating High grade ceramic core Material categorization: for
Contents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18
Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG
High Ohmic/High Voltage Metal Film Leaded Resistors
, High Ohmic/High Voltage FEATURES Metal film technology High pulse loading (up to 10 kv) capability Small size (0207/0411) Compatible with lead (Pb)-free and lead containing soldering processes Compliant
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.8 mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
Precision Leaded Resistors
FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 Ω to
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision www.vishay.com. Precision Thin Film Chip Resistors
Precision Thin Film Chip Resistors FEATURES Rated dissipation P 70 up to 0.4 W for size 1206 AEC-Q200 qualified Approved to EN 140401-801 Superior temperature cycling robustness Sulfur resistance verified
P O W E R C A P A C I T O R A S S E M B L I E S
AMERICAN TECHNICAL CERAMICS P O W E R C A P A C I T O R A S S E M B L I E S ISO 9001 REGISTERED COMPANY Overview About ATC Power Assemblies ATC standard & custom Power Assemblies are fabricated from PARALLEL
Harvatek Surface Mount LED Data Sheet. HT-F195 Series
Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** Jul. 15, 2005 Version of 1.4 Page 1/20 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 ATTENTION:
For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch)
For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) S35 Series New FEATURES 1. 1.7 mm wide slim two-piece type connector Mated height 0.6 mm Smaller compared to A4F series Width: Approx. 44% down
ROTARY CODED SWITCHES (SMD)
COPL ELECTRONICS RoHS compliant INTERNL STRUCTURE ETURES soldering Low profile of. mm Wide variety (top or side setting,, or positions, J-hook, gull wing or throuhg hole pins) to choose from Compatible
Insulated Precision Wirewound Resistors Axial Leads
Insulated Precision Wirewound Resistors Axial Leads In wirewound precision resistors, the series holds a leading position in professional applications whenever an excellent stability of the ohmic value
1.50mm Height 2220 Package Top View Full Color Chip LEDs Technical Data Sheet. Part No.: LL-R5050RGBC-001
.5mm Height 222 Package Top View Full Color Chip LEDs Technical Data Sheet Part No.: LL-R55RGBC- Spec No.: R55 Rev No.: V.2 Date: Mar./6/26 Page: OF 2 Features: P-LCC-6 package. White package. Optical
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM
Thick Film Chip Resistors, Military/Established Reliability -PRF-55342 Qualified, Type RM MATERIAL SPECIFICATIONS Resistive element Ruthenium oxide Encapsulation Epoxy Substrate 96 % alumina Termination
SMD Low Power LED 61-238/XK2C-BXXXXXXXXXX/ET
SMD Low Power LED Features P-LCC-6 package Top view LED Wide viewing angle:120 High Luminous intensity High Efficacy Pb-free RoHS-compliant. Description The Everlight 61-238 package has high efficacy,
November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]
![November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]](/thumbs/29/13476958.jpg "November 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s November 0 -terminal Filters For signal line MEM series MEM0S MEM0SC MEM0V MEM0F MEM608P 0[0805 inch]* 0[0805 inch] 0[0805 inch] 0[0805 inch] 608[060 inch] * Dimensions Code JIS[EIA]
NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES
Socket Header Compliance with RoHS Directive NRROW-PITCH CONNECTORS FOR PC ORDS 3. Perfect for portable devices, the bellows-type provide a strong resistance against falling, impacts, and forced insertions
FT-63 SINGLE TURN CERMET TRIMMERS FEATURES. PART NUMBER DESIGNATION F T - 6 3 E T V 5 k Ω ( 5 0 2 ) RoHS compliant
SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 FEATURES RoHS compliant Resistance tolerance ± 0 % O ring sealed and washable Suitable for automatic insertion and automatic adjustment Increase in
High Precision TCXO / VCTCXO Oscillators
Available at Digi-Key** www.digikey.com High Precision TCXO / VCTCXO Oscillators 2111 Comprehensive Drive Phone: 60-81- 722 Fax: 60-81- 00 US Headquarters: 60-81-722 European Headquarters: +-61-72221 Description:
INTERNATIONAL ATOMIC ENERGY AGENCY INSTRUMENTATION UNIT SMD (SURFACE MOUNTED DEVICES) REPAIR S. WIERZBINSKI FEBRUARY 1999
(SURFACE MOUNTED DEVICES) REPAIR S. WIERZBINSKI FEBRUARY 1999 (SURFACE MOUNTED DEVICES) REPAIR 1 TABLE OF CONTENTS PAGE 1. INTRODUCTION 3 2. ADVANTAGES 4 3. LIMITATIONS 4 4. DIALECT 5 5. SIZES AND DIMENSIONS
February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]
![February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]](/thumbs/19/266676.jpg "February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s February 2015 Chip Beads For power line HF-ACC Series HFxxACC3216 [1206 inch]* * Dimensions Code JIS[EIA] (2/8) REMINDERS FOR USING THESE PRODUCTS Before using these products,
Wirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount
Wirewound Resistors, Industrial Power, Aluminum Housed, hassis Mount FEATURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546
Features. Applications. Truth Table. Close
ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically
Athena is the name given to our assortment of electronic tapes. products of the very highest quality. These tapes both conduct and
Electric Athena. Athena is the name given to our assortment of electronic tapes products of the very highest quality. These tapes both conduct and insulate against electricity, in addition to warmth and
Capacitance Cap. Tol. Suffix construction. Rated voltage
Metallized Polypropylene Film Capacitors Type:ECWFE Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant plastic case. Features Small size Excellent
Professional Thin Film MELF Resistors
,, - Professional Professional Thin Film MELF Resistors, and professional thin film MELF resistors are the perfect choice for most fields of rn professional electronics where reliability and stability
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. FH Series (51pos. type) 3.45mm 17.1mm 0.9mm Features 1. Extremely light weight The largest version, with all contacts
Professional Thin Film Chip Resistors
Professional Thin Film Chip Resistors FEATURES Operating temperature up to 175 C for 1000 h Rated dissipation P 85 up to 0.4 W for size 1206 AEC-Q200 qualified Approved to EN 140401-801 Sulfur resistance
HL-A-3528H308W-S1-13. Description. Applications. Recommended Soldering. Package Dimensions
RoHS Specification Client Name: Client P/N: Factory P/N: HL-A-3528H308W-S1-13 OF-SMD3528WN Sending Date: Client approval Hong li approval Approval Audit Confirmation Approval Audit Confirmation 殷 小 平 王
Thin Film Chip Resistors and Arrays for High Temperature Applications Up to +230 C
CARTS USA 2010, New Orleans, Louisiana, March 15-18, 2010 Thin Film Chip Resistors and Arrays for High Temperature Applications Up to +230 C By Dr. Claude Flassayer Vishay Sfernice ABSTRACT With their
ATC 800 B Series NPO Ceramic, High RF Power Ultra-Low ESR Multilayer Capacitors
800 Series NPO Ceramic, High RF Power Ultra-ow ESR Multilayer Capacitors Case Size (" x ") Rugged, reliable NPO dielectric Case optimized for highest self resonant frequency s 800 Series offers superb
Type EDL, Electric Double Layer Supercapacitors Ultra High Capacitance, Small Case Size Options
Ultra High Capacitance, Small Case Size Options Type EDL electric double layer supercapacitors offer extremely high capacitance values (farads) in a variety of packaging options that will satisfy, low
AS2815. 1.5A Low Dropout Voltage Regulator Adjustable & Fixed Output, Fast Response
1.5A Low Dropout oltage Regulator Adjustable & Fixed Output, Fast Response FEATURES Adjustable Output Down To 1.2 Fixed Output oltages 1.5, 2.5, 3.3, 5.0 Output Current of 1.5A Low Dropout oltage 1.1 Typ.
SPECIFICATION MARITEX 06/30/ 08 CHIP INDUCTORS (ROHS)
FL201209SERIESLFR FL201209SERIESLFR Scope: This specification applies to multilayer ferrite & ceramicchip inductors. 1. Part Number Key & Mechanical Drawing FL XX XX XX XXX X A B C Tolerance Inductance
DATA SHEET THICK FILM CHIP RESISTORS Introduction
DATA SHEET THICK FILM CHIP RESISTORS Introduction Product Specification Product specification 2 Chip Resistor Surface Mount Data in data sheets is presented - whenever possible -according to a 'format',
Assembly of LPCC Packages AN-0001
Assembly of LPCC Packages AN-0001 Surface Mount Assembly and Handling of ANADIGICS LPCC Packages 1.0 Overview ANADIGICS power amplifiers are typically packaged in a Leadless Plastic Chip Carrier (LPCC)
Investigation of Components Attachment onto Low Temperature Flex Circuit
Investigation of Components Attachment onto Low Temperature Flex Circuit July 2013 Q. Chu, N. Ghalib, H. Ly Agenda Introduction to MIRA Initiative MIRA Manufacturing Platforms Areas of Development Multiphase
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com. Professional Metal Film Leaded Resistors
,, - Professional Professional Metal Film Leaded Resistors DESCRIPTION,, and professional leaded thin film resistors are the general purpose resistor for all fields of professional electronics where reliability
B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment
![B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment](/thumbs/30/14685882.jpg "B MOTORSPORT COMPONENTS B13. Max Circuit Measurement Characteristic Current Thread Part Number Range Curve [A] Size Connector Figure Comment")
B MOTORPORT COMPONENT B TEMPERATURE ENOR Purpose and unction Temperature sensors used in modern engine management systems are of NTC [negative temperature co-efficient] design. imply as temperature rises