Dot XL-6 CW Dot XL-9 CW

Transcription

1 Date: Quantity: Company: Project: Dot XL-6 CW Dot XL CW is an extra bright Cold White clear or diffused dot, with 6 or 9 LEDs per dot casing. The dots are constructed on a flexible cable with a customizable pitch containing up to 32 dots (9-LED) or 47 dots (6-LED). The dots are single dot controllable by DMX512 or e:pix (DVI capable), and are connected per string using the Dot XL Pixel Distributor. The Pixel Distributors can be daisy chained to form large installations. Product Specifications Model 1 Dot XL-6 Dot XL-6 with diffuser Dot XL-9 Dot XL-9 with diffuser Number of Pixel 40PXL 32PXL Light Source 6 high intensity SMT Warm White LED per dot 9 high intensity SMT Warm White LED per dot Color Temperature 6500K Cold White Viewing Angle Luminous Flux lm 44.5 lm lm 64.1 lm Efficacy lm/w 17.8 lm/w 29 lm/w 18.3 lm/w Cover Lens Clear PC Diffuser dome (PC) Clear PC Diffuser dome (PC) LED Pitch Lead Cable Length Housing Adjustment Options Dimensions (Ø x H) Weight Regulatory Listing & Safety Approval Operating Temperature Storage Temperature Environment Humidity 300mm standard; 100mm minimum for customized models 5m standard Die cast aluminium with PC cover Flexible cable Ø66 x 15.6mm Ø2.6 x 0.6 Ø66 x 36mm Ø2.6 x g (Dot); 670g (Pixel Distributor) CE, cetlus 20 C to +50 C / 4 F to +122 F 20 C to +70 C / 4 F to +158 F Ø66 x 15.6mm Ø2.6 x 0.6 Outdoor (Dot XL - IP67 rated; Pixel Distributor - IP66 rated; PSU - IP67 rated) 0 to 90%, non-condensing Ø66 x 36mm Ø2.6 x 1.4 Electrical Specifications Operating Voltage 15V DC Power Consumption 2 2.5W 3.5W System Specifications Power/Data Interface Control Power Supply Addressing Options TX CONNECT DMX512 / e:pix LED Engine 150W 15V Outdoor (see Ordering page for details) Auto-Addressing 1. Diffuser Dome is available upon request. Please consult your regional Traxon office for further details and aid. 2. Measurement per dot. LED CHARACTERISTICS Because LEDs are semiconductor devices, their performances are subject to inherent variability commonly found in semiconductor industry. To improve consistency in performance across the same product, LED manufacturers sort LEDs into bins according to different preset parameters, such as forward driving voltage, illumination, etc. Whereas binning is a sorting function, it is not a correction process. Inherent variability in the manufacturing process results always in different binning distributions according to different production lots. Traxon uses automatically binned LEDs on its products, thereby minimizing output variations within the model range. As with all electronic devices, LED output degrades over time a term called lumen depreciation. This also explains why it is nearly impossible to expect photometric performances of two LED products with different service life spans to be the same. The rate of LED degrade is a complicate function of many factors such as operating efficiency, duration of continuous operation, and more significantly, environmental conditions (ambient temperature for example). If allowed working under optimal operating temperature range and with good ventilation, LED devices enjoy long service lives over conventional light sources. When using/installing LED devices, care should be taken to ensure that the devices will operate within the operating conditions specified in respective product literature. This product is NOT suitable for coastal environments. Any such installation will void the product warranty. Product Specification 02/16 V0.9 1 of 9

2 Photometrics Source Specifications Source 6 Cold White LEDs (One Dot XL-6) 9 Cold White LEDs (One Dot XL-9) Optics 120 (clear cover) Cover Lens Clear PC CCT 6500K - Cold White Candela Distribution Light Output Cd: Dot XL-6 Color Luminous Flux (lm) Efficacy (lm/w) Cold White Cd: Dot XL-9 Color Luminous Flux (lm) Efficacy (lm/w) Cold White Illuminance at a Distance Center Beam LUX Dot XL-6 Beam Width (m) V H Center Beam LUX Dot XL-9 Beam Width (m) V H 2m m m m m *Diagram based on Dot XL-9 For fc divide by Vert.Spread: Horiz.Spread: Vert.Spread: Horiz.Spread: For feet multiply by 3.28 IES and LDT files are available for download from the Traxon website. Product Specification 02/16 V0.9 2 of 9

3 Photometrics Source Specifications Source 6 Cold White LEDs (One Dot XL-6) 9 Cold White LEDs (One Dot XL-9) Optics 170 Cover Lens Diffuser Dome (PC) CCT 6500K - Cold White Candela Distribution Light Output 105 Cd: Dot XL-6 Color Luminous Flux (lm) Efficacy (lm/w) Cold White Cd: Dot XL-9 Color Luminous Flux (lm) Efficacy (lm/w) Cold White Illuminance at a Distance Center Beam LUX Dot XL-6 Beam Width (m) V H Center Beam LUX Dot XL-9 Beam Width (m) V H 2m m m m m *Diagram based on Dot XL-9 For fc divide by Vert.Spread: 165 Horiz.Spread: Vert.Spread: Horiz.Spread: For feet multiply by 3.28 IES and LDT files are available for download from the Traxon website. Product Specification 02/16 V0.9 3 of 9

4 Dimensions Dot XL 66mm/ mm/ mm/0.61 R20.4mm/0.80 Ø4.2mm/ mm/0.05 Ø66mm/2.60 8mm/ mm/ mm/ mm/ mm/ mm/1.42 VERSION WITH DIFFUSER DOME Pixel Distributor with Power Supply (Outdoor) Cable length: 1000mm/ mm/ mm/7.8 89mm/3.5 50mm/2 POWER SUPPLY UNIT (Outdoor) PIXEL DISTRIBUTOR 20mm/0.79 Ø6.3mm/0.25 x 4 204mm/8 9mm/0.35 Cable length: 300mm/ mm/8.7 M4 x 4 Product Specification 02/16 V0.9 4 of 9

5 Mounting Dot XL Pixel Distributor LED Engine (Outdoor) mounts on top of the Pixel Distributor M4 screws (Included) Anchor bolts M6 (Not included) Product Specification 02/16 V0.9 5 of 9

6 Mounting Terminating the Dot XL cable and sealing with Field-cut End Cap (End Cap not included) Minimum clearance from last node 35mm/1.38 RTV SILICONE 1 Terminate cable with a straight cut. Ensure there is enough clearance to work with. Clean the surface using alcohol. 2 Apply RTV silicone (not included) on open-ended cable. RTV SILICONE RTV SILICONE Field-cut End Cap 3 Fill end cap cavity with RTV silicone and press open cable end inside. 4 Cover parts with RTV silicone and close cover. 5 Clean excess silicone 6 Place on flat surface and put from end cap. pressure on end cap (eg. with a weighted object) for the cure time recommended by RTV silicone s instructions. Product Specification 02/16 V0.9 6 of 9

7 System Diagram - Butler System Diagram INDOOR OUTDOOR To construct a longer Data Bridge Cable, use Indoor Data Cable and Outdoor RJ45 Housing. RJ45 Male Connector Housing IP67 Butler S2 TX Connect Data Indoor/Outdoor Bridge Cable (5m/16.4ft) Butler S2 DMX/RDM Output Engine Maximum: 100m CONTROLLER 512 DMX Channels per output To other distributor chain AC 110V/220V 50/60Hz Installation engineer should use appropriate plugs for outdoor connection. LED Engine 150W 15V Outdoor 300mm/11.8 TX Connect Data Outdoor Cable 0.3m/1ft and 3m/10ft available First dot of string DMX Address: First channel of string Last dot of string 1000mm/39.4 Maximum number of Pixel Distributors in the daisy chain depends on available DMX and e:pix channels. Dot XL Pixel Distributor Round lead cable: 300mm Flat lead cable: Maximum lead cable length depends on the number of dots and the dot pitch. For a 32-Dot XL-9 on a 300mm pitch, max. lead cable length is 5m. 1PXL dots 1 channel per dot Dot pitch: Minimum: 100mm Maximum dots per string: 32 for Dot XL-9, 32 DMX channels (16 strings per DMX512) 47 for Dot XL-6, 47 DMX channels (10 strings per DMX512) End cap Product Specification 02/16 V0.9 7 of 9

8 System Diagram - Video Micro Converter System Diagram DVI Source Ethernet Switch AC 110V/220V 50/60Hz INDOOR OUTDOOR Installation engineer should use appropriate plugs for outdoor connection. LCE2 fx LED Engine 150W 15V Outdoor Ethernet Source 300mm/11.8 To construct a longer Data Bridge Cable, use Indoor Data Cable and Outdoor RJ45 Housing. TX Connect Data Outdoor Cable 0.3m/1ft and 3m/10ft available RJ45 Male Connector Housing IP67 DE.AC Video Micro Converter (VMC) TX Connect Data Indoor/Outdoor Bridge Cable (5m/16.4ft) Maximum: 100m First dot of string DVI IN (DVI-D/DVI-I) DMX Address: First channel of string Maximum 8 outputs. DVI OUT Each output: 1536 channels. Total on 8 outputs: channels. DVI IN (DVI-D/DVI-I) Only 6 outputs are available if configured for 2048 channels per output. DVI OUT DAISY-CHAINED VMCs MAX. UNITS PER CHAIN: 8 Last dot of string USE DVI SPLITTER FOR FURTHER VMC CHAINS SEE VMC SPECIFICATION FOR MORE INFORMATION 1000mm/39.4 Maximum number of Pixel Distributors in the daisy chain depends on available DMX and e:pix channels. Dot XL Pixel Distributor Round lead cable: 300mm Flat lead cable: Maximum lead cable length depends on the number of dots and the dot pitch. For a 32-Dot XL-9 on a 300mm pitch, max. lead cable length is 5m. 1PXL dots 1 channel per dot Dot pitch: Minimum: 100mm Maximum dots per string: 32 for Dot XL-9, 32 DMX channels (16 strings per DMX512) 47 for Dot XL-6, 47 DMX channels (10 strings per DMX512) End cap Product Specification 02/16 V0.9 8 of 9

9 Ordering Fixtures Please contact regional Traxon sales office for details Standard Accessories (Included in Delivery) N/A 1x Pixel Distributor, 4x M4 Screws N/A Optional Accessories DO.AC Dot XL Field Cut End Cap (50pcs) AA TX Control EN.BU Butler S2 AB AC.BG Butler S2 Garage (Optional) AA Video Micro Converter (DMX/e:pix) AA Video Micro Converter Garage (Optional) AA TX Connect DE.AC TX CONNECT Data Indoor/Outdoor Bridge Cable, 5m16.4ft AA DI.IC TX CONNECT Data Cable, 1m/3.28ft AA DI.IC TX CONNECT Data Cable 3m/9.84ft A63408C0055 DI.IC TX CONNECT Data Cable 10m/32.8ft A DE.IC TX CONNECT Data Outdoor Cable, 0.6m/1.97ft AA DE.IC TX CONNECT Data Outdoor Cable, 3m/9.84ft AA DE.AC RJ45 Male Connector Housing IP67 AA TX Power PS.OA LED Engine 150W 15V Outdoor AA Product Specification 02/16 V0.9 9 of 9