2010 MACK LUBRICANT PROGRAM. Bulldog Product Information
|
|
- Gwendolyn Watkins
- 7 years ago
- Views:
Transcription
1 2010 MACK LUBRICANT PROGRAM Bulldog Product Information
2 Bulldog Engine Oil Bulldog EO-O Premium Plus oils with their unique and optimized formulation are designed to provide exceptional performance in both newer and older engines. Bulldog EO-O Premium Plus oils are formulated for superior soot-viscosity control for long engine and oil life They also reduce low temperature sludge and high temperature deposits by having balanced thermal and oxidative stability They will maintain their viscosity in severe, high temperature service and promote long engine and component life
3 Bulldog EO-O Premium Plus 10W-30 & 15W-40 Extra high performance diesel engine oil that helps extend engine life in some of the most severe on and off-highway applications while delivering outstanding performance in modern, high-output, low-emission engines Excellent soot-viscosity control Outstanding thermal/oxidative stability Excellent oil consumption control Key Product Benefit Greater engine efficiency, long engine/oil life Reduced low temp sludge and high temp deposits Less make-up oil * Excellent low temperature pumpability Improved cold start performance * Compared to mineral oils
4 Bulldog EO-O Premium Plus 10W-30 Fuel Efficiency Having the optimum viscosity at each operating condition will minimize overall engine friction and reduce fuel consumption. Two things are important: viscosity itself as well as viscosity retention Viscosity A multigrade lubricant with a lower viscosity grade could provide improved savings For example, using a Bulldog EO-O Premium Plus 10W-30 compared to Bulldog EO-O Premium Plus 15W-40 would provide a better chance of capturing the potential fuel savings Viscosity Retention Viscosity can increase over time because of lubricant break-down and contamination. Soot particles, contaminants, and by-products of oil break-down can lead to oil thickening, leading to reduced fuel economy and compromise wear protection Mack 10W-30 products provide outstanding protection against lubricant break-down and contamination that promotes the potential for improved fuel savings from the outstanding viscosity retention side as well as from its lower viscosity grade
5 Bulldog GO-J SAE 80W-90 & 85W-140 Extra high performance heavy-duty gear lubricants formulated from select base oils and an advanced additive system. These lubricants are engineered for performance in heavy-duty commercial transmissions, axles, and final drives where extreme pressures and shock loading are expected. Outstanding thermal/oxidative stability Good protection against low speed/high torque wear and high speed scoring Excellent low temperature pumpability Wide multi-purpose capability Key Product Benefit Extended gear and bearing life due to minimal deposits and longer seal life Increased load carrying capability and reduced operating costs Reduced wear and ease of start-up Reduced number of gear lubricants to simplify inventory and minimize misapplication * * Compared to mineral oils ** Bulldog GO-J SAE 85W-140 is not available in Canada
6 Bulldog Synthetic Gear Lubricant 75W-90 Synthetic drivetrain lubricants engineered to meet some of the most demanding extended drain requirements. These products are designed for use in heavy-duty drivetrains that require gear lubricants with excellent loadcarrying capability and where extreme pressures and shock loading are expected Outstanding thermal/oxidative stability Outstanding protection against low speed/high torque wear and high speed scoring Exceptional shear stability Excellent low temperature fluidity vs. mineral oils Key Product Benefit Extended gear and bearing life due to minimal deposits and longer seal life Increased load carrying capability and longer equipment life resulting in lower maintenance costs Retains viscosity and film strength under severe operating conditions to prevent wear Reduced wear and ease of start-up * * Compared to mineral oils
7 Bulldog Synthetic Transmission Fluid Fully synthetic, manual transmission lubricant engineered to meet some of the most demanding extended drain requirements. It is recommended for year-round lubrication of manual transmissions in light to severe duty on- and off-highway equipment operating in a wide range of environments Excellent load carrying, anti-wear, and EP performance Outstanding protection against deposit formation Key Product Benefit Extends transmission life and reduces cost of operation Longer seal life, extended drain and service intervals * Outstanding thermal/oxidative stability Extends component life and improves efficiency Exceptional shear stability Excellent low temperature fluidity vs. mineral oils * Compared to mineral oils Minimizes wear during severe operation Reduces wear during cold temperatures and improves shifting with quicker starts
8 Bulldog High Performance Grease NLGI 2 Extended service lithium complex greases intended for a wide variety of applications and severe operating conditions. These greases were designed to outperform conventional products by applying cutting edge,lithium complex manufacturing technology Superb resistance to water washout and spray-off Key Product Benefit* Assures proper lubrication and protection even in some of the most severe water exposure conditions Highly adhesive and cohesive structure Excellent grease tenacity, reduced leakage and extended relubrication intervals for reduced maintenance requirements Resistance to thermal, oxidative and structural degradation at high temperature Anti-wear and EP performance Extended grease life and enhanced bearing protection in high temperature applications offers reduced maintenance and replacement cost benefits Reliable protection of lubricated equipment, even under conditions of high sliding and shock loading with potential for extended equipment life and reduced unanticipated downtime * Compared to mineral oils
9 Bulldog Synthetic ATF Enhanced, long-term frictional properties Fully synthetic fluid with proprietary formulation approved by Allison Transmission, Inc. for the Allison TES-295 Specification (approval number = AN *) Key Product Benefit Improves and extends transmission efficiency, smooth shifting performance and fuel economy ** Outstanding thermal/oxidative stability Outstanding film-strength and anti-wear properties Excellent low-temperature fluidity Keeps transmissions clean to extend life and performance even under severe driving conditions Significant wear reduction and longer transmission life Provides prompt and reliable lubrication under extreme conditions Compatible with mineral ATF fluids * ** Compared to mineral oils Reduced concern in top-off situations and excellent seal materials leakage control
10 Bulldog All-Weather Hydraulic Oil 32 & 68 Excellent Hydraulic Efficiency High performance anti-wear hydraulic oils specifically designed to meet the needs of modern, high pressure, industrial and mobile equipment hydraulic systems. These oils are constructed from selected base oils and a proprietary additive system to provide well balanced performance in a range of applications Key Product Benefit Potentially reduced energy consumption or increased system responsiveness * Ultra Keep Clean Performance Shear Stable, High Viscosity Index Oxidation and Thermal Stability Reduced system deposits leading to reduced machine maintenance and increased component life Sustained component protection over a wide temperature (i.e. All-Weather ) Extends fluid life even under harsh operating conditions Anti-wear properties Helps reduce wear and protects pumps and components for extended equipment life * Compared to mineral oils ** Bulldog GO-J SAE 85W-140 is not available in Canada
11 US Mack Bulldog Lubricant Part Numbers
12 Canada Mack Bulldog Lubricant Part Numbers
239S SUPER LUBE SUPREME SAE 10, 30, 50 AND 60
239S SUPER LUBE SUPREME SAE 10, 30, 50 AND 60.Super Lube Supreme is a premium high performance para- synthetic, fluid that is specially formulated to provide superior protection and performance in powershift
More information#700 SUPREME 7000 SYNTHETIC PLUS SAE 15W-40 API CJ-4/CI-4/CI-4 Plus/SM
#700 SUPREME 7000 SYNTHETIC PLUS SAE 15W-40 API CJ-4/CI-4/CI-4 Plus/SM Supreme 7000 Synthetic Plus SAE 15W-40 is a premium quality para-synthetic, heavy-duty diesel engine oil formulated to provide improved
More informationFOOD GRADE INDUSTRIAL OILS & GREASES
FOOD GRADE INDUSTRIAL OILS & GREASES COMPRESSOR OILS Food Grade Synthetic Compressor Oils Fully synthetic compressor oils formulated from the highest quality polyalphaolefin (PAO) base oils with a superior
More informationShell Fleet Management working with you to keep your fleet moving.
I m in the business of moving freight. Want to move me? Help me keep my trucks on the road. Shell Fleet Management working with you to keep your fleet moving. www.shell.ca/fleet At Shell, we understand
More informationDRIVING CLASSICS INTO THE FUTURE
DRIVING CLASSICS INTO THE FUTURE ENGINE OILS GEAR OILS FUEL ADDITIVES DRIVING CLASSICS INTO THE FUTURE Millers Oils is one of the few companies to offer a range of engine oils, transmission oils and fuel
More informationVariable conditions Constant evolution
TELLUS OILS DO The next generation Variable conditions Constant evolution Shell Lubricants Under variable conditions there is just one thing you can Your equipment depends on reliable performance from
More informationAutomotive Base Oil Presentation
Automotive Base Oil Presentation What is a Base Oil? The refined petroleum mineral or synthetic material that is produced by a refinery to a required set of specifications. A lubricant s quality can depend
More informationShell Morlina S4 B. Advanced Bearing & Circulating Oils. Interim Technical Data Sheet. Previous Name: Shell Omala RL
Previous Name: Shell Omala RL Shell Morlina S4 B Advanced Bearing & Circulating Oils EXTRA LIFE & PROTECTION SEVERE APPLICATIONS Shell Morlina S4 B oils are high performance synthetic bearing and circulation
More informationMineral and Synthetic Lubricants Summary
Mineral and Synthetic Lubricants Summary Mineral Lubricants Slow-Speed Cylinder Oils Mobilgard 525 25 0.909 This premium-quality cylinder oil is designed for slow-speed engines operating on 0.10 percent
More information#158 PURE SYNTHETIC COMPRESSOR OIL ISO 32 THROUGH ISO 220
#8 PURE SYNTHETIC COMPRESSOR OIL ISO 2 THROUGH ISO 2 Pure Synthetic Compressor Oil is a full synthetic, non-detergent, ashless, non-zinc containing anti-wear, rust and oxidation inhibited premium quality
More informationHigh Performance Solutions for the Mining Industry. Mining Lubricants
High Performance Solutions for the Mining Industry Mining Lubricants Petro-Canada Lubricants Prove Their Worth Whatever the Conditions. Arctic cold. Desert heat. Dust. Mud. Your equipment has to perform
More informationDESIGNED TO DO MORE. JUST LIKE OUR GREASES SHELL GADUS.
DESIGNED TO DO MORE. JUST LIKE OUR GREASES SHELL GADUS. DESIGNED TO MEET CHALLENGES SHELL GADUS IS A COMPREHENSIVE FAMILY OF GREASES DESIGNED TO MEET YOUR NEEDS. Gadus is a comprehensive family of greases
More informationWhat Boat Captains and Marine Surveyors Should Know about Oils and Oil Analysis
What Boat Captains and Marine Surveyors Should Know about Oils and Oil Analysis Tom Johnson, President/Co-Founder JG LUBRICANT SERVICES, LLC Affiliate Member, Society of Accredited Marine Surveyors (SAMS)
More informationFood processing industry. Your production is secure with nevastane lubricants
Food processing industry Your production is secure with nevastane lubricants Food safety: no worries! Guaranteeing food safety consumers is paramount for day s food processors. With this challenge in mind,
More informationBB00.40-P-0231-00A. BB00.40-P-0231-00A General gear oils Status 146555
BB00.40-P-0231-00A General gear oils Status 146555 MODEL ALL General The gear oils approved for MB vehicles are classified according to their application into: Hypoid gear oils sheet 235.0/.6/.7/.8/.9/.15/.20/.31/.61/.62
More informationPolyalphaolefin Synthetic Basestocks. Group IV Basestocks. Polyalphaolefins
Polyalphaolefin Synthetic Basestocks Group IV Basestocks Polyalphaolefins What are Poly Alpha Olefins (PAO)? Synthetic high performance basestocks Hydrogenated (saturated) olefin polymers Manufactured
More informationConvoy Application For Motor Oil Limited Warranty
Convoy Application For Motor Oil Limited Warranty PLEASE PRINT OR TYPE Vehicle owner last first middle initial Street address _ City/State/Zip Phone # ( ) Fax # ( _ ) _ Representative last first middle
More informationTBN Retention of Engine Oil - Improvements through Diesel Fuel Stabilization
MARYNINTERNATIONAL RESEARCH LABS 201-1MIP-1012 TBN Retention of Engine Oil - Improvements through Diesel Fuel Stabilization Revised: October 2011 ABSTRACT Mass Transit Bus Fleets in Curitiba Brazil examines
More informationCat S O SSM. Services. Understanding Your Results. Understanding Your: S O S Oil Reports S O S Oil Results S O S Coolant Reports S O S Coolant Results
Cat S O SSM Services Understanding Your Results Understanding Your: S O S Oil Reports S O S Oil Results S O S Coolant Reports S O S Coolant Results Contents Overview of S O S Oil Reports...4-5 Overview
More informationHow To Use Castrol Spincawh
Hyspin AWH Series High Quality Mineral Oils with a Viscosity Index Improver CASTROL HYSPIN AWH is a range of high quality mineral oils with a viscosity index improver, designed for operations over a wide
More informationPutting the Simple Back into Viscosity. Written by John Sander Vice President of Technology Lubrication Engineers, Inc.
White Paper LE WHITE PAPER Written by John Sander Vice President of Technology Lubrication Engineers, Inc. The Lubrication Reliability Source www.le-inc.com 800-537-7683 1 Abstract: Simply stated, viscosity
More informationDesign Engineer's Guide Selecting a Lubricant for Ball Screws
Design Engineer's Guide Selecting a Lubricant for Ball Screws Jeff Johnson, Product Engineer Thomson Industries, Inc. Wood Dale, IL 540-633-3549 www.thomsonlinear.com thomson@thomsonlinear.com Many parameters
More informationCaterpillar Machine Fluids Recommendations
SEBU6250-19 February 2013 Caterpillar Machine Fluids Recommendations Special Publication SAFETY.CAT.COM Important Safety Information Most accidents that involve product operation, maintenance and repair
More informationS O SSM. Fluid Analysis Program. your equipment? The S O S Program was introduced by Caterpillar in 1971
S O SSM Fluid Analysis Program The S O S Program was introduced by Caterpillar in 1971 and soon became recognized as the leader in oil analysis. Its concept was simple reduce unnecessary downtime and the
More informationSHELL ADVANCE PRODUCT PORTFOLIO
SHELL ADVANCE PRODUCT PORTFOLIO INTRODUCING SHELL ADVANCE Shell is the world s number one lubricants supplier*. We sell more lubricants than any other company in the world. With more than 75 years of experience
More informationTECHNICAL INFO CAR MANUFACTURER APPROVALS AND SPECIFICATIONS
TECHNICAL INFO CAR MANUFACTURER APPROVALS AND SPECIFICATIONS BMW: BMW LL98: Longlife-98 Special long-life engine oil, approved by BMW. Also meets ACEA A3/B3, API SJ/CD, EC SAE 5W-40. Usually required for
More informationDuramax Maintenance Info
The following maintenance schedule was arranged using information from GM, OEM manufacturers and personal experience. It does not represent the standard and should only be used as reference, you may choose
More informationGrease Composition for Lubrication of Journal Bearings used in Sugar Mills
Grease Composition for Lubrication of Journal Bearings used in Sugar Mills T. Singh, S K Banerjee and K Ravi Bharat Petroleum Corporation Limited R&D Centre Sewree (E), Mumbai - 400 015, India E-mail:
More informationWORLD CLASS LUBRICANTS. Automotive Passenger Cars
WORLD CLASS LUBRICANTS Automotive Passenger Cars Q8Oils with its unique, innovative and progressive approach develops, manufactures and markets some of the finest quality lubricants in the world representing
More informationOIL CONSIDERATION TO LENGTHEN ENGINE LIFE
OIL CONSIDERATION TO LENGTHEN ENGINE LIFE Farm Machinery Fact Sheet FM-19 By Dr. Von H. Jarrett, Extension Agricultural Perhaps nothing will add to the life of an automobile, truck, tractor or other fuel-powered
More informationFS Lubricants. Oil Analysis Program
FS Lubricants Oil Analysis Program What can an oil analysis do for you? 1. Establish safe and proper drain intervals. 2. Provide a reduction in unforeseen breakdowns. 3. Reduce down time. 4. Minimize the
More informationJohnson Controls Parts Centre. Sabroe S68 refrigeration oil
Johnson Controls Parts Centre refrigeration oil Hydro-treated, high performance oil for refrigeration Sabroe offers the highest quality lubricants available for today s refrigeration market. The increased
More informationCaterpillar On-Highway Diesel Engine Fluids Recommendations
SEBU6385-08 November 2009 Caterpillar On-Highway Diesel Engine Fluids Recommendations Special Publication SAFETY.CAT.COM Important Safety Information i03684547 Most accidents that involve product operation,
More informationRoller bearing life. The Reaction of AISI 52100 Bearing Steel to Heat
Roller bearing life in high temperatures A common question maintenance personnel ask bearing companies when their equipment temperature is high or rises is, What is the maximum temperature that your rolling
More informationenjoy technology the complete line of lubricants for your truck efficiency and reliability in all working conditions
enjoy technology the complete line of lubricants for your truck efficiency and reliability in all working conditions From eni s research laboratories comes a complete line of lubricants for heavy-duty
More informationViscosity: A lubricant s most important characteristic
Viscosity: A lubricant s most important characteristic Introduction For any oil lubrication system, oil viscosity is considered as the most important parameter. One should always ensure that the viscosity
More informationHow To Test Motor Oil
lubricants Local Service, Worldwide Table of contents Passenger Car Motor Oils 5 Heavy Duty Diesel Engine Oils 15 Small Engine Oils 22 Automotive Gear Oils 25 Automatic Transmission Fluids 29 Agricultural
More informationCaterpillar Machine Fluids Recommendations. SEBU6250-13 October 2004
Caterpillar Machine Fluids Recommendations SEBU6250-13 October 2004 Important Safety Information i01658146 Most accidents that involve product operation, maintenance and repair are caused by failure to
More information#254 HTC SUPREME ISO 32 THROUGH 320
#254 HTC SUPREME ISO 32 THROUGH 320 HTC Supreme is a premium quality para-synthetic, non-detergent, anti-wear, rust and oxidation inhibited, non-detergent oil that is specially formulated for use in those
More information1/ ON-ROAD: Trucks, Buses, Waste-Collection Vehicles. THE TOTAL RUBIA RANGE OF ENGINE OILS, one of the most comprehensive on the market
1/ ON-ROAD: Trucks, Buses, Waste-Collection Vehicles THE TOTAL RUBIA RANGE OF ENGINE OILS, one of the most comprehensive on the market i For fleets: 1/ For large fleets -TOTAL RUBIA TIR lubricants, all
More informationLUBRICANTS MOTO 4T 2T MOTORCYCLE, SNOW AND SPECIAL PRODUCTS
LUBRICANTS MOTO 4T 2T MOTORCYCLE, SNOW AND SPECIAL PRODUCTS TABLE OF CONTENTS 4 4-STROKE 4 REPSOL MOTO RACING 4T 4 REPSOL MOTO RACING HMEOC 4T 4 REPSOL MOTO SINTETICO 4T 4 REPSOL MOTO SPORT 4T 5 REPSOL
More informationCaterpillar Machine Fluids Recommendations
SEBU6250-20 July 2014 Caterpillar Machine Fluids Recommendations Special Publication SAFETY.CAT.COM Important Safety Information Most accidents that involve product operation, maintenance and repair are
More informationAdvanced Polyalphaolefins. SpectraSyn Ultra
Advanced Polyalphaolefins SpectraSyn Ultra What is SpectraSyn Ultra PAO? An unique molecular structure which results in improved high viscosity, high VI PAO basestocks Provide more stable viscosity / film
More informationCat Gas Engine Lubricant, Fuel, and Coolant Recommendations
SEBU6400-05 November 2010 Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations Special Publication SAFETY.CAT.COM Important Safety Information i03991620 Most accidents that involve product operation,
More informationMAINTENANCE PRODUCTS AND SERVICES S O S SM. Services
MAINTENANCE PRODUCTS AND SERVICES S O S SM Services Know More. Do More. Maintaining your Cat engines and machines is one of your top priorities. A good place to start is with S O S Services oil analysis
More informationLubricants and Lubrication - from the Well to the Applications
Lubricants and Lubrication - from the Well to the Applications By Neville W. Sachs, P.E., CLS Applied Technical Services, Inc. Marietta, GA www.atslab.com 1 Our Plan A little bit about the lubricants industry
More informationA New Membrane System for Efficient Removal of Water from Gear Oil Road to Commercialization
A New Membrane System for Efficient Removal of Water from Gear Oil Road to Commercialization Sudip Majumdar, Stuart Nemser Compact Membrane Systems, Wilmington, Delaware, USA Kal Farooq, Keith Benninghoff
More informationLubricants for Food and Related Industries GERALYN. food grade NSF-H1 lubricants
Lubricants for Food and Related Industries GERALYN food grade NSF-H1 lubricants Non-Toxic, Food Grade, NSF-H1 Registered Global FUCHS LUBRITECH is the global speciality division in the Fuchs group of companies.
More information18.1 DIESEL ENGINE OIL
L eisure craft engines are often subject to greater wear and tear than other engines. The reason is simple: Leisure craft are frequently run intensively for short periods and then laid up for long periods.
More informationVISCOSITY CLASSIFICATIONS
VISCOSITY CLASSIFICATIONS INDUSTRIAL LUBRICANT CASSIFICATIONS ISO (International Standards Organisation) viscosity classification The ISO viscosity classification uses mm 2 /s () units and relates to viscosity
More informationPre-Filtration for Ultimate Cleanliness and Efficiency: HYDAC Diesel PreCare. Dual function: Diesel filtration + Water removal
Pre-Filtration for Ultimate Cleanliness and Efficiency: HYDAC Diesel PreCare. Dual function: Diesel filtration + removal Diesel PreCare: The Clear Link Guaranteed HYDAC quality thanks to HYDAC Quality
More informationWorldwide Marine Customer Support
Worldwide Marine Customer Support TM Customer Support for Cat and MaK TM Marine Engines Caterpillar Marine Power Systems has one simple goal: to exceed our customers expectations by providing outstanding
More informationOIL CONDITION MONITORING: AUTOMOTIVE ANALYSIS
OIL CONDITION MONITORING: AUTOMOTIVE ANALYSIS Why Analyse Lubricants? With increasing costs and tighter deadlines, the need for effective maintenance strategies is greater than ever before. So why not
More informationCrankshaft Design Radial Piston Hydraulic Motors & Gearboxes
Crankshaft Design Radial Piston Hydraulic Motors & Gearboxes History SAI was founded in 1964 when the Pecorari family could not find a reliable low speed, high torque motor for their farm equipment. Frustrated
More informationCharacteristics of New Oil Soluble Polyalkylene Glycols
Characteristics of New il Soluble Polyalkylene Glycols Dr. Govind Khemchandani The Dow chemical Company SP STLE HUSTN CHAPTER FEBURARY 9, 2011 gvkhemchandani@dow.com Tel: 1-979-238-4045 Introduction New
More informationTrend Health Check & Monitoring Program - in-depth fluid condition analysis at laboratory
Trend Health Check & Monitoring Program - in-depth fluid condition analysis at laboratory A thorough monitoring program is essential for an efficient preventive maintenance of your system. Our program
More informationLonger lifetime for hydraulic oil
Longer lifetime for hydraulic oil In many applications hydraulic oils and lubricating oils are exchanged with new oil after only some thousand hours of operation. Changing the oil causes high costs and
More informationLubrication solutions from SKF
Lubrication solutions from SKF Helping your business run more smoothly The Power of Knowledge Engineering Discover what SKF lubrication solutions can mean for your business The true potential of lubrication
More informationBP Lubricants. BP UK Ltd. Wakefield House. Pipers Way. Swindon SN3 1RE. United Kingdom. Tel: +44 (0)1793 512 712. www.bp.com/uk.
BP Lubricants BP Lubricants BP UK Ltd Wakefield House Pipers Way Swindon SN3 1RE United Kingdom Tel: +44 (0)1793 512 712 www.bp.com/uk HD/00097 BP Autran MBX Automatic Transmission Fluid Grade Code: J031
More informationOSP-New Group V Base Fluid for Manufacture of Sulfonate Greases
OSP-New Group V Base Fluid for Manufacture of Sulfonate Greases Dr. Govind Khemchandani The Dow Chemical Company Perry Byrd Mid-South Sales, Inc NLGI s 81STAnnual Meeting, Palm Beach Gardens, Florida,
More informationLiquid Applied Internal Flow Coatings for Oil Transmission Lines
Liquid Applied Internal Flow Coatings for Oil Transmission Lines M R McDonnell E Wood Limited United Kingdom This paper will examine more closely the benefits to the Industry by lining Oil Pipelines. Introduction
More informationLubricant Solutions for the Rail Industry
FUCHS Industrial Lubricants Innovative solutions need experienced application engineers Every lubricant change should be preceded by expert consultation on the application in question. Only then can the
More informationUS Heavy Duty Fleets - Fuel Economy
US Heavy Duty Fleets - Fuel Economy Feb. 22, 2006 Anthony Greszler Vice President Advanced Engineering VOLVO POWERTRAIN CORPORATION Drivers for FE in HD Diesel Pending oil shortage Rapid oil price increases
More informationAEROSHELL PRODUCT SPECIFICATIONS
AEROSHELL 2.2 10.84 Scope of list This list is comprised of all current AeroShell Grades, namely: aviation oils, fluids, greases and other Shell products used in aircraft, i.e. aviation fuels and specialised
More informationPUMP MAINTENANCE SCHEDULE AND CHECKLISTS
PUMP MAINTENANCE SCHEDULE AND CHECKLISTS Providing a maintenance schedule defined specifically by run hours or yardage pumped serves only as a general guideline given the large amount of variables a unit
More informationFALEX Four-Ball Extreme Pressure Test Machine
FALEX Four-Ball Extreme Pressure Test Machine The Four-Ball EP Test measures a lubricant s extreme pressure properties under High Hertzian contact in pure sliding, or pure rolling, motion. The test is
More informationMobil Antifreeze Advanced
Mobil Antifreeze Advanced Concentrated antifreeze formula. Helps prevent winter freezing and summer overheating. Organic Acid Technology (OAT) formula offers excellent protection for aluminum engines.
More informationEngine oils for passenger cars 1 / 2012
High-tech protection for engines Contact: Engine oils for passenger cars 1 / 2012 FUCHS EUROPE SCHMIERSTOFFE GMBH Friesenheimer Straße 19 68169 Mannheim / Germany Phone: +49 621 3701-0 Fax: +49 621 3701-570
More informationSKF Seals Knowledge Engineering. Designed to optimize machinery performance
SKF Seals Knowledge Engineering Designed to optimize machinery performance From moulding high quantities to mach Sealing for power transmission The performance and service life of a power transmission
More informationUltra Coolant. The Best Performance. The Best Cost. The Best Coolant.
Ultra Coolant The Best Performance. The Best Cost. The Best Coolant. Ultra Coolant is not an oil. Ultra Coolant is an engineered synthetic coolant specifically designed to help rotary screw compressors
More informationRolling Bearing for Environments of Ultrahigh Temperatures
[ New Product ] Rolling Bearing for Environments of Ultrahigh s Miki ARIHANA* Takayuki KAWAMURA** In recent years the demand of bearings which are used at 4 degree C for tenter clips, glassmaking facility
More informationBearing designs. Bearing testing. Extract from the Railway technical handbook, volume 1, chapter 4, page 99 to 105
Bearing designs Bearing testing Extract from the Railway technical handbook, volume 1, chapter 4, page 99 to 105 Railway technical handbook Volume 1 xleboxes, wheelset bearings, sensors, condition monitoring,
More informationDiesel Fuel Additive Heavy Duty Applications. December 2011
Diesel Fuel Additive Heavy Duty Applications December 2011 Diesel Fuel Additives Long term performance Long term benefits have been measured in both light duty and heavy duty vehicles with respect to;
More informationTectyl Specialised Anti Corrosion Products
Marine Products Valvoline offers a wide range of lubricants and speciality chemicals for the marine industry that covers from the smallest fishing vessel and pleasure boats through to the larger vessels.
More informationAdoption of PC-11 into API 1509. Dec. 10, 2015
Adoption of PC-11 into API 1509 Dec. 10, 2015 Motion Robert Stockwell, Oronite Second Jim Linden, Total Set the first licensing date for API CK-4 and FA-4 Standards as Dec. 1, 2016 Passed by Lubricants
More informationBEARINGS, TYPES & SERVICEABILITY LIMITS, FAILURE MODES
Training Title BEARINGS, TYPES & SERVICEABILITY LIMITS, FAILURE MODES Training Duration and Dates 5 days training Bearings, Types and Serviceability Limits, Failure Modes 5 01 05 Sep $3,750 Abu Dhabi,
More informationIncrease the efficiency of your rotating machines by optimizing your bearing lubrication
Increase the efficiency of your rotating machines by optimizing your bearing lubrication I. Introduction When designing oil lubrication systems for bearings, the classical criteria are the necessity for:
More informationMaking the Most of SáOá SM Services
MAINTENANCE PRODUCTS AND SERVICES Making the Most of SáOá SM Services With S O S Services, you don t just get test results, you get accurate analysis from the people who know your Cat equipment best. Your
More informationAEROSHELL GREASES THE DEFINITION OF A GREASE IS:
AEROSHELL AEROSHELL THE DEFINITION OF A GREASE IS: A solid or semi-solid lubricant comprising a dispersion of a thickening agent in a liquid lubricant to which various additives have been added to improve
More informationPatech. Our Conviction. Quality Service Innovation PATECH FINE CHEMICALS CO., LTD
Our Conviction Quality Service Innovation Product Categories Refrigeration Lubricants POE for HFC Refrigerants POE for HCFC Refrigerants POE for HFO Refrigerants Special Plasticizers Nontoxic Plasticizer
More informationPin & Vee Block Test Machine
Pin & Vee Block Test Machine Picture of the apparatus Used in Standard Test Methods ASTM Standards D 2670, D2626, D3233, D5620 Federal Test Methods FTM-791-3807.1, FTM-791-3812.1 Chrysler Corporation 461-C-84-01,
More information3/5/2015. Oil Analysis Tests. Lubricating Oils. Six Functions of Lubricating Oil
Oil Analysis Tests Oil analysis is a series of laboratory tests used to evaluate the condition of used lubricants and equipment components. By studying the results of the used oil analysis tests, a determination
More informationService Bulletin. Cummins Engine Oil and Oil Analysis Recommendations
Service Bulletin Number Date 3810340-06 11-MAY-2007 Design Application Market Application All All Service Bulletin Cummins Engine Oil and Oil Analysis Recommendations Section 1: Diesel Engine Oil Recommendations
More informationTrouble Shooting. Pump
Trouble Shooting Pump Trouble Possible Cause Remedy Oil leaking in the area of water pump crankshaft Worn crankshaft seal, bad bearing, grooved shaft, or failure of retainer o-ring. Excessive play on crankshaft
More informationNSK Product Lineup for Machine Tools
NSK Product Lineup for Machine Tools We have two general catalogs on Super Precision and Precision Machine Components available, which contain detailed information related to our bearings and linear products.
More informationKemet DIAMOND PRODUCTS
Kemet DIAMOND PRODUCTS Kemet Diamond Products Since 1938, Kemet has been at the forefront of precision polishing technology, producing quality diamond pastes, slurries and composite lapping/polishing materials
More information6001-602 NOTCHED MARKER DISCS/HUBS BOX
6001-602 NOTCHED MARKER DISCS/HUBS BOX YETTER MANUFACTURING CO. FOUNDED 1930 Colchester, IL 62326-0358 Toll free: 800/447-5777 309/776-3222 (Fax) Website: www.yetterco.com Email: info@yetterco.com 1 6001-602
More informationLubrication for Linear Roller Bearings and Raceways Minimize Corrosion and Maximize the Life of Linear Roller Bearing Systems
Lubrication for Linear Roller Bearings and Raceways Minimize Corrosion and Maximize the Life of Linear Roller Bearing Systems 2013 PBC Linear, A Division of Pacific Bearing Company Lubrication for Linear
More informationNORMAN FILTER COMPANY PRODUCT OVERVIEW
NORMAN FILTER COMPANY PRODUCT OVERVIEW LEADING THE WAY IN QUALITY FILTRATION WWW.NORMANFILTERS.COM FILTER ELEMENT INTERCHANGE Tee-Type Filter 4500, 14500, 34500, and 54500 Series Mini Tee-Type Filter 4100
More informationTypical water pump claims and causes
Typical water pump claims and causes www.meyle.com MEYLE water pumps pioneering advancements instead of technological dead end! The water pump quality depends upon the use of high grade components. These
More informationChapter 7 Hydraulic System Troubleshooting
Chapter 7 Hydraulic System Troubleshooting General The following troubleshooting information is provided as a general guide to identify, locate and correct problems that may be experienced with the hydraulic
More informationYOUR EFFICIENCY IS OUR PASSION
YOUR EFFICIENCY IS OUR PASSION Specialty lubricants for mobile telescopic cranes www.fuchs-lubritech.com A Member of the FUCHS PETROLUB Group » We are passionate about what we do. Together we meet your
More informationecognition of Prior Learning (RPL)
ecognition of Prior Learning (RPL) ASSESSMENT GUIDE FOR INSPECT AND LUBRICATE AN AUTOMOTIVE SYSTEM Assessment Guide inspect and lubricate an automotive system Page 1 of 9 National Certificate in Professional
More informationCSI Oil Analysis Options
Product Data Sheet L-OAOB-101105 October 2005 Machinery Health Management CSI Oil Analysis Options n CSI Oil Laboratory provides accurate and comprehensive industrial oil analysis results you can import
More informationBiodiesel Research Project Final Report Summary
Biodiesel Research Project Final Report Summary Funded by Imperial Oil, Canadian Petroleum Products Institute and Natural Resources Canada under National Renewable Diesel Demonstration Initiative (NRDDI)
More informationS O SSM. Services. Cat. Management Guide. Accurate Analysis Improved Cost Control Optimized Performance
S O SSM Services Cat Management Guide Accurate Analysis Improved Cost Control Optimized Performance Contents S O S SM Services introduction... 3 Making the most of S O S Services...4-5 Good equipment health
More informationManufacturer s Fluid Specifications
Setting The Industry Standard Manufacturer s Fluid Specifications The fluids noted below are recommended by the steering gear manufacturer. Any fluid noted below a specific gear is acceptable provided
More informationAutomatic Back-Flushing Filter AutoFilt RF9.
Automatic Back-Flushing Filter AutoFilt RF9. AutoFilt RF9 Clearing the Way. The Challenge: In response to the Tier III standard which will come into effect in 2016, the International Maritime Organization
More informationLinear guide slides. For smooth and extremely accurate positioning
Linear guide slides For smooth and extremely accurate positioning Complete Gilman USA slide selection Linear slides ** Built-to-order Ball or roller styles Used for high-precision, high-speed applications
More information