Pneumatic Performance Data 10 mm. Temperature Range. Operating Pressure. Cv per ANSI / (NFPA) T *100% Duty Cycled

Transcription

1 Solenoid Valves & Accessories PNEUMADYNE, INC. Catalog 400 Phone Fax Features l Miniature size (.08 OAL) l Direct acting l Mounting versatility l Lightweight (.4 oz) l Manual override l Fast response time l LED standard l & -way normally closed, -way normally open & -Way Solenoid Valves 0 mm Pneumadyne's 0 mm direct acting solenoid valves are a cost effective, space saving solution for the use of single or multiple valves. An overall length of.08" and height of.5" make this valve the ideal choice for limited space applications. This versatile valve offering includes & 4 Volt DC and a low watt 4 Volt DC. Fast response times and high flow rates make this miniature valve suitable for numerous applications. Pneumatic Performance Data 0 mm Orifice/ Function 0.7 mm NC 0.5 mm NC Temperature Range Operating Pressure C v 0 o F to 0 o F (-5 C to 50 C)* Flow Rate (scfm) 50 psi Max. psi psi (7 bar) psi (7 bar) Fill Time sec/ in 0-90 psi.8.54 Exhaust Time sec/ in 00-0 psi..54 Select from three connector options to simplify valve installation. Convenient Line & 90 Connectors (both with LED) provide quick electrical connection when used in conjunction with the plug-in cable (sold separately). The standard Flying Lead Connector features 00 mm wires for direct connection. Life Expectancy 50 million maximum cycles per minute 0.7 mm NO Cv per ANSI / (NFPA) T.. *00% Duty Cycled Electrical Performance Data 0 mm Voltage Tolerance -5 % to 0% Materials psi (7 bar) Response Time Energize Connector wire gauge: 4 AWG Response Time De-energize Copper Wire Insulation Class 8 ms 0 ms F F (55 C) Copper, Nylon-Glass Filled, Stainless Steel, Buna-N

2 PNEUMADYNE, INC. Catalog 400 Phone Fax mm Solenoid Valve Cross Section -Way & -Way Normally Closed -Way Normally Open -Way De-energized Energized De-energized Energized Normally Closed -Way Port Designation Input Port Output Port Exhaust Port Flow Rate (scfm) 0 mm Solenoid Flow Chart Input Pressure (psi) 05 Ø 0.7 mm Orifice,. W Solenoid Valves & Accessories De-energized Energized Product Number Diagram 0 mm Position Indicators- Silver plate indicates Normally Closed valve, Black plate indicates Normally Open valve S0MM-0-- Actuator Solenoid 0 mm Function = -Way = -Way Position One 0= Normally Closed = Normally Open Voltage = V DC 4= 4V DC 4LW= 4V DC (0.6 Watt) Example: 0 mm, -Way, Normally Closed, V DC, Connectors = 00 mm = Line Connector w/led 4= 90 Connector w/led 90 Connectors and Line Connectors offer plumbing versatility and feature a "surge voltage suppressor" Plug-in Cable lengths of 00 mm, 500 mm, and 000 mm are available for fast connection to Line and 90 Connectors 07

3 Solenoid Valves & Accessories PNEUMADYNE, INC. Catalog 400 Phone Fax Cover Plates effectively conceal unused manifold stations and block valve supply port (sold separately) 0 mm four station manifold with Line and 90 Connectors Product Information 0 mm -Way Normally Closed Part Number Connection DC/.6 Watt/ Orifice.7mm S0MM-0-- S0MM-0-- Line Connector S0MM Connector 4 DC/.6 Watt/ Orifice.7mm S0MM-0-4- S0MM-0-4- Line Connector S0MM Connector 4 LW/.6 Watt/ Orifice.5mm S0MM-0-4LW- S0MM-0-4LW- Line Connector S0MM-0-4LW-4 90 Connector -Way Normally Closed Part Number Connection DC/.6 Watt/ Orifice.7mm S0MM-0-- S0MM-0-- Line Connector S0MM Connector 4 DC/.6 Watt/ Orifice.7mm S0MM-0-4- S0MM-0-4- Line Connector S0MM Connector 4 LW/.6 Watt/ Orifice.5mm S0MM-0-4LW- S0MM-0-4LW- Line Connector S0MM-0-4LW-4 90 Connector -Way Normally Open Part Number Connection DC/.6 Watt/ Orifice.7mm S0MM--- S0MM--- Line Connector S0MM Connector 4 DC/.6 Watt/ Orifice.7mm S0MM--4- S0MM--4- Line Connector S0MM Connector Accessories Part Number Description SMMC-00 Plug-in cable 00 mm SMMC-500 Plug-in cable 500 mm SMMC-000 Plug-in cable 000 mm MSV0-CP 0 mm cover plate Variety of voltages, orifices and connectors are available - contact factory with requirements 08

4 PNEUMADYNE, INC. Catalog 400 Phone Fax " Flying Leads.70 Line Connector - Connector - Connector 90 Connector -4 Connector.5 0 mm Solenoid Valve mm Port Designation..9.8 Ordering Information l To order standard product refer to Product Information listing. l Cover Plates available for use with manifolds. l Plug-in Cable for use with Line and 90 Connectors available. l Mounting screws provided. Polarity Counts! Some valves require + to + and - to - connection Solenoid Valves & Accessories mm Footprint l All measurements in inches, unless otherwise specified. When design makes a dimension critical- contact factory for confirmation. All dimensions shown subject to change without notice. To centerline spacing.4 Minimum centerline Datum zero X.047 Max To req d depth X M.7 X MET For use with Pneumadyne s 0 mm manifolds and bases. Click here for ordering information. 09

5 Solenoid Valves & Accessories PNEUMADYNE, INC. Catalog 400 Phone Fax Features l Miniature size (.65 OAL) l Direct acting l Mounting versatility l Lightweight (. oz) l Manual override l Fast response time l LED standard l & -way normally closed, & -way normally open & -Way Solenoid Valves 5 mm Pneumadyne's 5 mm direct acting solenoid valves are a cost effective, space saving solution for the use of single or multiple valves. A wide variety of connector, electrical and mounting options are available to accommodate numerous applications. Convenient Line & 90 Connectors (both with LED) provide quick electrical connection when used in conjunction with the plug-in cable (sold separately). The standard Flying Lead features 00 mm wires for direct connection. The 5 mm valves incorporate a fourth option, the Connector, providing installation versatility (DIN Connector available). Life Expectancy 50 million maximum cycles per minute (with standard working conditions) This versatile valve offering includes Volt DC, 4 Volt DC and 0 Volt AC coils. Three orifice diameters, 0.8 mm,. mm &.6 mm, are also available to fit flow rates to application requirements. Fast response times and high flow rates make this miniature valve ideal for a wide variety of applications. Pneumatic Performance Data 5 mm Temperature Range Electrical Performance Data 5 mm Voltage Tolerance -5 % to 0% Materials Response Time Energize 0 ms Connector wire gauge: 4 AWG 0 o F to 0 o F (-5 C to 50 C)* Orifice/ Operating Cv Flow Rate Fill Time Exhaust Time Function Pressure (scfm) sec/ in sec/ in 50 psi Max. psi0-90 psi 00-0 psi E, 0.8/. mm 50 NC, LW 50 psi (0 bar) D,./. mm 50 NC 50 psi (0 bar) D,./. mm 05 NO 05 psi (7 bar) B,.6/.6 mm 05 NC 05 psi (7 bar) B,.6/.6 mm 75 NO 75 psi (5 bar) C,.6/. mm 05 NO 05 psi (7 bar) Cv per ANSI / (NFPA) T.., *00% Duty Cycled Response Time De-energize Copper Wire Insulation Class ms F F (55 C) Copper, Nylon-Glass Filled, Stainless Steel, Buna-N 0

6 PNEUMADYNE, INC. Catalog 400 Phone Fax mm Solenoid Valve Cross Section -Way -Way Normally Closed -Way Normally Open Back View: The normally open (NO) gasket channels input flow allowing NO valves and NC valves to be mounted on the same porting footprint De-energized Energized De-energized Energized Port Designation Input Port Output Port Exhaust Port Product Number Diagram 5 mm S5MM-0--0B 5 mm Solenoid Flow Chart Normally Closed Flow Rate (scfm) Input Pressure (psi) Ø 0.8 mm Orifice,.0 W Ø. mm Orifice,. W Ø.6 mm Orifice,. W 5 mm Solenoid Flow Chart Normally Open.5 Flow Rate (scfm) Input Pressure (psi) Solenoid Valves & Accessories Actuator Solenoid 5 mm Function = -Way = -Way Position One 0= Normally Closed = Normally Open Orifice B= Ø.6/.6 mm C = Ø.6/. mm Connectors (NO only) 0= D= Ø./. mm = E= Ø 0.8/. mm 00 mm = Line Connector w/led 4= 90 Connector w/led Voltage = V DC W = V DC Watt 4= 4V DC 4W= 4V DC Watt 0 = 0 AC Example: 5 mm, -Way, Normally Closed, V DC, Connector,.6 mm Ø Orifice Ø. mm Orifice,. W Ø.6 mm Orifice,. W Polarity Counts! Some components require + to + and - to - connection

7 Solenoid Valves & Accessories PNEUMADYNE, INC. Catalog 400 Phone Fax mm Cover Plate (sold separately) includes mounting screws DIN Connectors (sold separatelyshown installed) available for 5 mm Connector Normally closed and normally open 5 mm valves can be mounted on the same manifold Coil can be rotated 80 Cylinder Control Valves are ideal for applications requiring controlled movement of single-acting spring return cylinders. Designed for use with Pneumadyne s 5mm valves. Product Information 5 mm -Way Normally Closed Part Number Connection V DC/.5 Watt/ Orifice.6/.6 mm 05 psi- Max. Operating Pressure S5MM-0--0B S5MM-0--B S5MM-0--B Line Connector S5MM-0--4B 90 Connector V DC/.5 Watt/ Orifice./. mm 50 psi- Max. Operating Pressure S5MM-0--0D S5MM-0--D S5MM-0--D Line Connector S5MM-0--4D 90 Connector V DC/.0 Watt/ Orifice 0.8/. mm 50 psi- Max. Operating Pressure S5MM-0-W-0E S5MM-0-W-E S5MM-0-W-E Line Connector S5MM-0-W-4E 90 Connector 4V DC/.5 Watt/ Orifice.6/.6 mm 05 psi- Max. Operating Pressure S5MM-0-4-0B S5MM-0-4-B S5MM-0-4-B Line Connector S5MM-0-4-4B 90 Connector 4V DC/.5 Watt/ Orifice./. mm 50 psi- Max. Operating Pressure S5MM-0-4-0D S5MM-0-4-D S5MM-0-4-D Line Connector S5MM-0-4-4D 90 Connector 4V DC/.0 Watt/ Orifice 0.8/. mm 50 psi- Max. Operating Pressure S5MM-0-4W-0E S5MM-0-4W-E S5MM-0-4W-E Line Connector S5MM-0-4W-4E 90 Connector -Way Normally Open Part Number Connection V DC/.5 Watt/ Orifice.6/.6 mm 75 psi- Max. Operating Pressure S5MM---0B S5MM---B S5MM---B Line Connector S5MM---4B 90 Connector V DC/.5 Watt/ Orifice.6/. mm 05 psi- Max. Operating Pressure S5MM---0C S5MM---C S5MM---C Line Connector S5MM---4C 90 Connector 4V DC/.5 Watt/ Orifice.6/.6 mm 75 psi- Max. Operating Pressure S5MM--4-0B S5MM--4-B S5MM--4-B Line Connector S5MM--4-4B 90 Connector 4V DC/.5 Watt/ Orifice.6/.mm 05 psi- Max. Operating Pressure S5MM--4-0C S5MM--4-C S5MM--4-C Line Connector S5MM--4-4C 90 Connector Accessories Part Number Description SMMC-00 Plug-in cable 00 mm SMMC-500 Plug-in cable 500 mm SMMC-000 Plug-in cable 000 mm MSV5-CP SMM-DIN SMM-MDIN 5mm cover plate DIN (5 mm ONLY) Molded DIN cable M (5 mm ONLY)

8 PNEUMADYNE, INC. Catalog 400 Phone Fax Product Information 5 mm -Way Normally Closed Part Number Connection V DC/.5 Watt/ Orifice.6/.6 mm 05 psi- Max. Operating Pressure S5MM-0--0B S5MM-0--B S5MM-0--B Line Connector S5MM-0--4B 90 Connector V DC/.5 Watt/ Orifice./. mm 50 psi- Max. Operating Pressure S5MM-0--0D S5MM-0--D S5MM-0--D Line Connector S5MM-0--4D 90 Connector V DC/.0 Watt/ Orifice 0.8/. mm 50 psi- Max. Operating Pressure S5MM-0-W-0E S5MM-0-W-E S5MM-0-W-E Line Connector S5MM-0-W-4E 90 Connector 4V DC/.5 Watt/ Orifice.6/.6 mm 05 psi- Max. Operating Pressure S5MM-0-4-0B S5MM-0-4-B S5MM-0-4-B Line Connector S5MM-0-4-4B 90 Connector 4V DC/.5 Watt/ Orifice./. mm 50 psi- Max. Operating Pressure S5MM-0-4-0D S5MM-0-4-D S5MM-0-4-D Line Connector S5MM-0-4-4D 90 Connector 4V DC/.0 Watt/ Orifice 0.8/. mm 50 psi- Max. Operating Pressure S5MM-0-4W-0E S5MM-0-4W-E S5MM-0-4W-E Line Connector S5MM-0-4W-4E 90 Connector -Way Normally Closed (Cont d) Part Number Connection 0V AC/.8 VA/ Orifice.6/.6 mm 05 psi- Max. Operating Pressure S5MM-0-0-0B S5MM-0-0-B S5MM-0-0-B Line Connector S5MM-0-0-4B 90 Connector 0V AC/.8 VA/ Orifice./.mm S5MM-0-0-0D S5MM-0-0-D S5MM-0-0-D Line Connector S5MM-0-0-4D 90 Connector -Way Normally Open Part Number Connection V DC/.5 Watt/ Orifice.6/.6 mm 75 psi- Max. Operating Pressure S5MM---0B S5MM---B S5MM---B Line Connector S5MM---4B 90 Connector V DC/.5 Watt/ Orifice.6/. mm 05 psi- Max. Operating Pressure S5MM---0C S5MM---C S5MM---C Line Connector S5MM---4C 90 Connector V DC/.5 Watt/ Orifice./. mm 05 psi- Max. Operating Pressure S5MM---0D S5MM---D S5MM---D Line Connector S5MM---4D 90 Connector Pneumadyne s Solenoid Valves are recommended for use with our solenoid manifolds & single bases. For mounting convenience, single to -station manifolds are available with 0- (F) or M5 (F) threads. See page 6 for product for ordering information. -Way Normally Open (Cont d) Part Number Connection 4V DC/.5 Watt/ Orifice.6/.6 mm 75 psi- Max. Operating Pressure S5MM--4-0B S5MM--4-B S5MM--4-B Line Connector S5MM--4-4B 90 Connector 4V DC/.5 Watt/ Orifice.6/.mm 05 psi- Max. Operating Pressure S5MM--4-0C S5MM--4-C S5MM--4-C Line Connector S5MM--4-4C 90 Connector 4V DC/.5 Watt/ Orifice./.mm 05 psi- Max. Operating Pressure S5MM--4-0D S5MM--4-D S5MM--4-D Line Connector S5MM--4-4D 90 Connector Solenoid Valves & Accessories

9 Solenoid Valves & Accessories PNEUMADYNE, INC. Catalog 400 Phone Fax Position indicators- Silver plate indicates normally closed valve Black plate indicates normally open valve 5 mm Solenoid Valve -0 Connector - Connector.67 Line Connector..65 M.6 (9.) Connector " - Connector -4 Connector Manual override is standard on all 5 mm Solenoid Valves A variety of connector options provides installation versatility Ordering Information l To order standard product refer to Product Information listing. l Cover Plates available for use with manifolds. l Plug-in Cable for use with Line and 90 Connectors available. l Mounting screws provided. 5 mm Port Designation 5 mm Footprint X M X MET Datum zero.60 Minimum centerline To centerline spacing.9.9 l All measurements in inches, unless otherwise specified. When design makes a dimension critical- contact factory for confirmation. All dimensions shown subject to change without notice X.078 Max To req d depth 4

10 PNEUMADYNE, INC. Catalog 400 Phone Fax Incorporating Solenoid Valves in Custom Products For over 0 years, manufacturers have relied on Pneumadyne for innovative solutions to their fluid handling applications. Whether using standard or custom products, we take the time to understand your needs and recommend components and systems that best fit your requirements. Solenoid Operated Custom Products l Reduce system size through component consolidation l Ease product installation saving time & money l Eliminate potential leak-points l Improve efficiency & appearance through good design l Increase reliability with quality components Solenoid Valves & Accessories Incorporating solenoid valves in custom products allows Pneumadyne engineers to consolidate components into a common body thereby reducing system size and easing product installation. Component consolidation also decreases the number of external connections, eliminating potential leak-points in your application. From basic lifting mechanisms to critical medical devices, the breadth of Pneumadyne s solenoid offering lends itself to a wide variety of applications. Four styles of high quality valves provide an assortment of voltage, connection and wattage options to ensure that specifications are met when used in custom products. With flow rates ranging from.99 to 7.5 scfm at 00 psi and response rates as low as 8 milliseconds, Pneumadyne solenoid valves are the ideal interface between your pneumatic systems and electrical controls. This distinctive valve assembly features a pressure regulator, two solenoid valves, a needle valve and fittings with precision orifices For space saving purposes, five V DC valves are condensed on a custom manifold. Push-to-connect fittings feature colored collets to speed installation and simplify line identification. 5

11 Solenoid Valves & Accessories PNEUMADYNE, INC. Catalog 400 Phone Fax Features l Multiple mounting options l Independent coil orientation l Manual override l & -Way normally closed l DIN Connector available & -Way Solenoid Valves System 6 System 6 solenoids offer fast response times. A wide variety of voltages is available to fit application specifications. The low wattage (0.8 watt) version is ideal for use in low power control circuits. Single to 5-station manifolds are available for mounting convenience. System 6 solenoids can be fixed in either direction on the manifold and coil orientation is independent of valve orientation. Pneumatic Performance Data System 6 Temperature Range Orifice/ Wattage Ø 0.6 mm / 0.8 watt Ø.0 mm /.9 watt,. VA Electrical Performance Data System 6 Voltage Tolerance Operating Pressure Cv per ANSI / (NFPA) T.. Response Time Energize C v 5 F to F (-5 C to 50 C) Flow Rate (scfm) 50 psi 5 psi 0-5 psi Response Time De-energize Fill Time sec/ in 0-90 psi Exhaust Time sec/ in 00-0 psi 0-5 psi Copper Wire Insulation Class -0% to 0% 5 ms 7 ms F F (55 C) Life Expectancy 0 million cycles Flying leads wire gauge: 4 AWG Materials Brass, Enameled Copper, Viton, Polyimide, Cr-Ni-Steel 6

12 PNEUMADYNE, INC. Catalog 400 Phone Fax System 6 Solenoid Valve Cross Section -Way & -Way Energized Energized Energized -Way Normally Closed -Way Normally Open -Way Normally Closed Port designation Input Port Output Port Exhaust Port Flow Rate (scfm) Flow Rate (scfm) System 6 Flow Chart.0 Orifice Input Pressure (psi) System 6 Flow Chart 0.6 Orifice Solenoid Valves & Accessories The low wattage (0.8 watt) version solenoid valve is ideal for use in low power control circuits Input Pressure (psi) 8 0 AWG 7

13 Solenoid Valves & Accessories PNEUMADYNE, INC. Catalog 400 Phone Fax DIN Connector (shown installed) Provides dust and watertight termination while relieving strain between cable and solenoid Product Information System 6 -Way Normally Closed Part Number Description Orifice.0 mm S /0 AC,. VA, S /0 AC,. VA, S DC,.9 Watt, S6-0-- DC,.9 Watt, S /40 AC,. VA, S /40 AC,. VA, S6-0-4AC-0 4 AC,. VA, S6-0-4AC- 4 AC,. VA, S DC,.9 Watt, S DC,.9 Watt, -Way Normally Closed Part Number Description Orifice.0 mm S /0 AC,. VA, S /0 AC,. VA, S DC,.9 Watt, S6-0-- DC,.9 Watt, S /40 AC,. VA, S /40 AC,. VA, S6-0-4AC-0 4 AC,. VA, S6-0-4AC- 4 AC,. VA, S DC,.9 Watt, S DC,.9 Watt, System 6 coil can be fixed at o clock,, 6, and 9 o clock on the valve body Coil orientation is independent of valve orientation Part Number Description Orifice 0.6 mm S6-0-LW-0 DC, 0.8 Watt, S6-0-LW- DC, 0.8 Watt, S6-0-4LW-0 4 DC, 0.8 Watt, S6-0-4LW- 4 DC, 0.8 Watt, Part Number Description Orifice 0.6 mm S6-0-LW-0 DC, 0.8 Watt, S6-0-LW- DC, 0.8 Watt, S6-0-4LW-0 4 DC, 0.8 Watt, S6-0-4LW- 4 DC, 0.8 Watt, Accessories S6-DIN DIN Connector For use with Pneumadyne s System 6 manifolds and bases. See page 9 for product and ordering information 8

14 PNEUMADYNE, INC. Catalog 400 Phone Fax Actuator Solenoid System 6 Product Number Diagram System 6 Function = -Way = -Way S Position One 0= Normally Closed Voltage = V DC LW= V DC low watt (0.6 mm orifice only) 0= 0/0V AC 0= 0/40V AC 4AC= 4V AC 4= 4V DC 4LW= 4V DC low watt (0.6 mm orifice only) Connectors 0= = Flying Leads 8 Example: Solenoid System 6, -Way, Normally Closed, 4V DC, connectors Ordering Information l Solenoid valve and manifold sold separately. l To order standard product refer to Product Information listing. l Mounting screws () are provided. l Contact factory for DIN Connector with LED and/or suppression. Solenoid Valves & Accessories System 6 A wide variety of voltages is available to fit application specifications Footprint.6.00 X M.6 Min Deep Ø.089 Input port Ø Ø Output port.60 Can be located anywhere on Ø.48 circle l All measurements in inches, unless otherwise specified. When design makes a dimensions critical- contact factory for confirmation. All dimensions shown subject to change without notice. 9

15 Solenoid Valves & Accessories PNEUMADYNE, INC. Catalog 400 Phone Fax Features l Multiple mounting options l Independent coil orientation l Manual override l & -Way normally closed, -Way normally open l DIN connector available l 6.0 Watt coils & -Way Solenoid Valves System 8 Pneumadyne's System 8 Solenoid Valves feature a larger orifice for applications requiring higher flow rates. A variety of voltage and mounting options are available to fit system specifications. Our single base and to 0- station manifolds are convenient solutions for plumbing single or multiple valves. System 8 solenoid valves can be fixed in either direction on the manifold and coil orientation is independent of valve orientation. Pneumatic Performance Data System 8 Temperature Range Orifice/ Function.5 mm/ WNC / WNO.5 mm/ WNC Electrical Performance Data System 8 Voltage Tolerance -0% to 0% Operating Pressure Cv per ANSI / (NFPA) T.. Response Time Energize C v 5 F to F (-5 C to 50 C) Flow Rate (scfm) 50 psi 5 psi 0-50 psi psi N/A Response Time De-energize Fill Time sec/ in 0-90 psi Copper Wire Insulation Class 8 ms 9 ms F F (55 C) Exhaust Time sec/ in 00-0 psi Materials Brass, Enameled Copper, Viton, Polyimide, Cr-Ni-Steel System 8 Solenoid Valves feature a larger orifice for applications requiring higher flow rates 0

16 PNEUMADYNE, INC. Catalog 400 Phone Fax System 8 Solenoid Valve Cross Section -Way & -Way Energized Energized Energized -Way Normally Closed Port designation Input Port Output Port Exhaust Port -Way Normally Open -Way Normally Closed Flow Rate (scfm) System 8 Flow Chart Input Pressure (psi) Ø.5 mm Orifice Ø.5 mm Orifice Solenoid Valves & Accessories Actuator Solenoid System 8 Product Number Diagram System 8 Function = -Way = -Way S Position One 0= Normally Closed = Normally Open Voltage = V DC 0= 0/0V AC 0= 0/40V AC 4= 4V DC Connectors 0= Example: Solenoid System 8, -Way, Normally Closed, V DC, connectors S8-DIN- Degree of protection according to IEC 59 in attached state: IP 65 Cable outlet can be turned 80 Surge suppression available with LED light to 0-station manifolds are convenient solutions for plumbing single or multiple valves

17 Solenoid Valves & Accessories PNEUMADYNE, INC. Catalog 400 Phone Fax DIN Connector (shown installed) Provides dust and watertight termination while relieving strain between cable and solenoid Product Information System 8 -Way Normally Closed Part Number Description Orifice.5 mm S DC, 6.0 Watt S DC, 6.0 Watt S /0 AC, 9. VA S /40 AC, 9. VA -Way Normally Closed Part Number Description Orifice.5 mm S DC, 6.0 Watt S DC, 6.0 Watt S /0 AC, 9. VA S /40 AC, 9. VA System 8 -Way Normally Open Part Number Description Orifice.5 mm S8---0 DC, 6.0 Watt S DC, 6.0 Watt S /0 AC, 9. VA S /40 AC, 9. VA Accessories S8-DIN DIN Connector Footprint System 8 coil can be fixed at o clock,, 6, and 9 o clock on the valve body X Mx MIN. Ø.00 Input Port Ø.00 Output Port Can be located anywhere on Ø.80 circle Ø Coil orientation is independent of valve orientation l All measurements in inches, unless otherwise specified. When design makes a dimensions critical- contact factory for confirmation. All dimensions shown subject to change without notice. Ordering Information l Solenoid valve and manifold sold separately. l To order standard product refer to Product Information listing. l Mounting screws () are provided. l Contact factory for DIN Connector with LED and/or suppression. l EPDM seals are optional. Contact factory for ordering information.

18 PNEUMADYNE, INC. Catalog 400 Phone Fax Pneumatic Performance Data 0 mm 5 mm 5 mm Temperature Range Orifice/ Function.75 mm NC. mm NC.6 mm NC Electrical Performance Data Power (Watt) Operating Pressure Cv per ANSI / (NFPA) T.. *Will operate at.0 psi Voltages C v 0 to 50 psi to 05 psi Voltage Tolerance 0 o F to 0 o F (-5 C to 50 C) Flow Rate (scfm) 50 psi Max. psi 0 to 05 psi.06 05psi (7 50 psi (0 05 psi (7 bar) Response Time Energize Fill Time sec/ in 0-90 psi..07 Exhaust Time sec/ in 00-0 psi Response Copper Wire Time Insulation De-energize Class Features l Momentary pulse required to energize & to de-energize l -Wire system (5 mm) l Relay not required to reverse polarity (5 mm) l -Way & -Way normally closed l Fast response time l & 4 V DC l 0 mm & 5 mm valves l Miniature size & -Way Latching Solenoid Valves 0 & 5 mm Pneumadyne s 0 mm & 5 mm Latching Solenoid Valves are ideal for applications where power is limited or coil heating is unwanted; continuous power is not required to maintain the energized position. An internal magnet holds the valve in the open position when the power supply is removed, saving power consumption. Fast response times allow for a momentary pulse to energize and deenergize the valves. The 5 mm valves need only 0 milliseconds to energize and milliseconds to de-energize. Solenoid Valves & Accessories 0 mm.6 4 DC -5 % to 0% 8 ms 0 ms F F (55 C) 5 mm 4 DC, 4 DC -5 % to 0% 0 ms ms F F (55 C) Flying leads wire gauge: 4 AWG Materials Copper, Nylon-Glass Filled, Stainless Steel, Buna-N Life Expectancy 50 million cycles- with standard working conditions-@,700 maximum cycles per minute 5 mm valves energize in 0 milliseconds and de-energize in milliseconds

19 Solenoid Valves & Accessories PNEUMADYNE, INC. Catalog 400 Phone Fax Flow Rate (scfm) Latching Solenoid Flow Chart Input Pressure (psi) 0 mm Ø.75 mm Orifice,. W 5 mm Ø. mm Orifice, 4.0 W 5 mm Ø.6 mm Orifice, 4.0 W Pneumadyne s Latching Solenoid Valves are recommended for use with our solenoid manifolds & single bases. For mounting convenience, single to -station manifolds are available with 0- (F) or M5 (F) threads Actuator Solenoid Product Number Diagram Latching Solenoid Valve S5MML-0--B Valve Size/ Latching 0 mm Latching 5 mm Latching Function 0= -Way Normally Closed 0= -Way Normally Closed Voltage = V DC 4= 4V DC Connectors = 00 mm Orifice B= Ø mm D= Ø.-. mm Example: 5 mm, Latching, -Way, Normally Closed, V DC, Flying Lead Connector,.6 mm Ø Orifice Function: 0 mm Valve The 0 mm valve features a -wire system to reverse polarity. Applying an electrical signal to the Red wire and ground to the Black wire energizes (latches) the valve. An internal magnet holds the valve in the energized (open) position when the power supply is removed. Reversing the wires, ground to Red and electrical signal to Black, de-energizes (unlatches) the valve. -Wire System Power to Red, Ground to Black Latch / Energize Ground to Red, Power to Black Unlatch / De-energize Manifolds are designed for use with specific valves. Be sure to select from the correct product grouping when ordering manifolds and bases for use with solenoid valves Function: 5 mm Valve The 5 mm valves feature a -wire system to reverse polarity; Relays are not required. Applying an electrical signal to the Brown wire energizes (latches) the valve. The internal magnet holds the valve in the energized (open) position when the power supply is removed. Applying an electrical signal to the Blue wire de-energizes (unlatches) the valve. -Wire System Brown Latch / Energize / + Black Common / - Blue Unlatch / De-energize / + Single bases available with a variety of porting options 4

20 PNEUMADYNE, INC. Catalog 400 Phone Fax Port designation.40 Input Port Output Port Exhaust Port.06 Latching Solenoid Valve Port Designation Footprint To centerline spacing.4 Minimum centerline Datum zero X.047 Max To req d depth X M.7 X MET 0 mm Product Information -Way Normally Closed Part Number Voltage Orifice 5 mm (4.0 Watt) S5MML-0--B DC.6 mm S5MML-0--D DC. mm S5MML-0-4-B 4 DC.6 mm S5MML-0-4-D 4 DC. mm -Way Normally Closed Part Number Voltage Orifice 0 mm (.6 Watt) S0MML DC.75 mm 5 mm (4.0 Watt) S5MML-0-6-B 6 DC.6 mm S5MML-0--B DC.6 mm S5MML-0--D DC. mm S5MML-0-4-B 4 DC.6 mm S5MML-0-4-D 4 DC. mm Solenoid Valves & Accessories.59 Latching Solenoid Valve Port Designations. 5 mm Ordering Information l To order standard product refer to Product Information listing Footprint.59.8 l Solenoid valve and manifold sold separately. l Cover Plates available for use with manifolds. l Mounting screws () are provided..66 Port designation Input Port Output Port Exhaust Port X M X MET Datum zero.60 Minimum centerline To centerline spacing X.078 Max To req d depth l All measurements in inches, unless otherwise specified. When design makes a dimensions critical- contact factory for confirmation. All dimensions shown subject to change without notice. 5

21 Solenoid Valves & Accessories PNEUMADYNE, INC. Catalog 400 Phone Fax Features l Single to stations l Variety of port sizes l Compact l Precision machined l Anodized aluminum for corrosion resistance Manifolds & Single Bases For use with Pneumadyne Solenoid Valves Pneumadyne manifolds are a compact, cost effective solution for mounting multiple solenoid valves. Single to - station manifolds are available with 0- (F), M5 (F), /8 NPT (F) or /4 NPT (F) threads. For added versatility, the single bases also feature 5/ push-to-connect. All manifolds are anodized for corrosion resistance. Cover plates are available to conceal unused stations and block the valve supply port. Manifolds are designed for use with specific valves. Be sure to select from the correct product grouping when ordering manifolds and bases for use with solenoid valves. Performance Data Materials Temperature Range -0 F to 00 F - C to 9 C Aluminum/ Anodize Port Options Operating Pressure Determined by Valve Manifold Single Station Multiple Station Pressure Output 0 mm 5 mm l M5 l 0- l 5/ PI l M5 l 0- l 5/ PI l 0- l M5 /8 NPT l 0- l M5 0- System 6 0- /8 NPT 0- l Push-to-connect fittings available for /8 and 5/ OD tubing. (For use with multiple station manifolds) System 8 /8 NPT /4 NPT 0- Fitting Recommendations Standard /4 hex O-ring fittings are recommended for use with standard threaded manifolds and single bases. Please refer to Pneumadyne s full line catalog for fitting information. Fittings must be installed prior to mounting valves. 6

22 PNEUMADYNE, INC. Catalog 400 Phone Fax mm Manifold Multiple Station 0- or M5 ports For use with Pneumadyne s 0 mm Solenoid Valves. See page 06 for product information A.8 B.4 MSV mm Manifolds Part Number Stations A B MSV MSV MSV MSV MSV MSV MSV0--M5.6.4 MSV0-4-M MSV0-6-M MSV0-8-M MSV0-0-M MSV0--M Solenoid Valves & Accessories 0 mm Single Bases Single Station Non-threaded exhaust MSV0-0- ports MSV0--M5 M5 ports.75 Exhaust X 0- or M X C'Bore Ø. x. Deep Ø. Thru l For use with /4 hex fittings MSV0-P MSV0--M5P.06. X 0- or M5 A B C MSV / push-to-connect ports Exhaust Port Designation NC NO A Input Exhaust B Exhaust Input C Output Output X C Bore Ø. x. Deep Ø. Thru 0 mm Single Bases Part Number StationsLgth wdth hgt MSV MSV0--M MSV MSV0-P MSV0--M5P Mounting Instructions 0 mm Normally Open Valves l Single bases -use MSV0-P l Multiple station manifolds - plumb exhaust port (E) as input, pressure port (P) becomes exhaust l Cannot be mounted with normally closed valves on the same manifold X C'Bore. x. Deep. Thru.50.5 l All measurements in inches, unless otherwise specified. When design makes a dimensions critical- contact factory for confirmation. All dimensions shown subject to change without notice. Refer to fitting recommendation information 7

23 Solenoid Valves & Accessories PNEUMADYNE, INC. Catalog 400 Phone Fax mm Manifolds Part Number Stations A B MSV MSV MSV MSV MSV MSV MSV5--M5.74. MSV5-4-M MSV5-6-M MSV5-8-M MSV5-0-M MSV5--M Normally closed and normally open 5 mm valves can be mounted on the same manifold MSV X Ø..4.6 A B mm Manifold Multiple Station /8 NPT Pressure and Exhaust ports 0- Output ports mm Bases Part Number Stations Lgth wdth hgt MSV MSV5--M MSV5--M5P MSV5-P MSV MSV5-0- MSV5--M5 M5 ports Exhaust Ø l For use with /4 hex fittings mm Single Bases Single Station MSV5-P 0- ports MSV5--M5P M5 ports Exhaust: parallel/threaded Ø l For use with /4 hex fittings Solenoid single bases and multiple station manifolds feature a clear anodic coating which provides corrosion and wear resistance We design custom products to meet your application needs MSV / push-to-connect ports Exhaust Ø * Single base mount: Valve hangs over ports (pg. 4 lower photo)..4 We design custom products to meet your application needs 8

24 PNEUMADYNE, INC. Catalog 400 Phone Fax System 6 Manifold System 6 Base MSV6- X Ø.0 Thru.687 System 8 Manifold System 8 Base MSV8- (.50) 4 X Ø.7 Thru (.000).50 A B Output Ports /8 NPT Pressure Ports.5 (.65).50 (.000) XØ UNC Output Ports A 4X Ø.59 Thru All B X 0- Ports "SQ. /4 NPT Pressure Ports X /8 NPT System 6 Manifolds Part Number Stations A B MSV6- See Drawing MSV MSV6-..6 MSV MSV System 6 parallel ported single station manifold System 8 Manifolds Part Number Stations A B MSV8- See Drawing MSV MSV MSV MSV MSV MSV MSV MSV MSV Ordering Information l To order standard product refer to Product Information listing. l Contact factory for custom colors. l Cover Plates available. l Solenoid valves sold separately. Refer to Solenoid Valve section for ordering information. Solenoid Valves & Accessories 9