2/2 - Way Angle.

Transcription

1 / - Way Angle Seat Valves

2 Applications Industries, applications, and media where the SED seat valves may be used. Industry: Pharmaceutical, medical, food, beverage, cosmetics, chemical, packaging, plastic, rubber, textile and color industry. Multiport valve for the control and shut off of heating or cooling media, heating of fermentation units and batch boilers. Applications: Sterilization in CIP and SIP, autoclave, steam generation, washing and cleaning facilities, filling, cooling circuits, heating facilities, boiler construction, dosing, packaging, drying, temperature and pressure control and process flow. Positioner Type.. Media: Steam, water, cooling water, gases, nitrate, compressed air, oils and various chemicals. Actuator Type 8 Multiport Valve /-Way Solenoid Valve Type /-way angle seat valves with two stage actuator, adjustable stroke limiter, AS-Interface and circumferential optical position indicator, used for the filling of production containers with weighing equipment. AS-Interface Type.89 Bioreactor from Solaris biotechnology with SED /-Way Angle Seat Valves for purified steam and diaphragm valves for aseptic media. Integrated Stroke Limiter Type. Two Stage Actuator Type 9

3 Ordering Key and Ordering Example Pos. Description Code Specification Type: Manual valve, plastic hand wheel Manual valve, stainless steel hand wheel, metal bellow Pneumatic valve, plastic actuator material PAMX D Pneumatic valve, aluminium actuator Pneumatic valve, two stage plastic actuator (only Cf. ) Size: 8-8 DN 8,,,,,,,,, 8 Valve body material: Stainless steel, investment cast./s, ASME BPE Table MM-..- Stainless steel, investment cast.8 Valve body end connection: N 9 Threaded socket BSP Threaded socket NPT Butt weld end ISO (DIN 8 Series B) Butt weld end DIN 8 Series Butt weld end DIN 8 Series (DIN 8 Series A) Butt weld end ASTM 9 ASME BPE (DIN 8 Series C) Butt weld end SMS 8 Flange PN/ DIN, face to face DIN EN 8-, Series Clamp ISO, for tube EN ISO face to face DIN EN 8-, Series Clamp DIN, for tube DIN 8 face to face DIN EN 8-, Series Clamp ASME BPE, for tube ASME BPE face to face DIN EN 8-, Series Sealing: Encapsulated circumferential PTFE sealing Actuator control Manually operated function: Normally closed (NC), orientation 9 to flow direction Normally open (NO), orientation 9 to flow direction Double action (DA), orientation in flow direction Actuator type: S T Plastic hand wheel Stainless steel hand wheel Plastic actuator with Stainless steel adaption, piston Ø Flow below the seat Plastic actuator with Stainless steel adaption, piston Ø Flow above the seat Plastic actuator with Stainless steel adaption, piston Ø Flow below the seat Plastic actuator with Stainless steel adaption, piston Ø Flow above the seat Plastic actuator with Stainless steel adaption, piston Ø Flow below the seat Plastic actuator with Stainless steel adaption, piston Ø Flow above the seat Aluminium actuator with Stainless steel adaption, piston Ø Flow below the seat Bold = preferential standards Code: Artikel No.: 8 Type: 8 Pneumatic valve Plastic actuator Material PAMX D Size: DN Valve Body Material: Stainless steel, investment cast./l Valve Body End Connection: Threaded socket Actuator Type: Plastic actuator with Stainless steel adaption, piston Ø Actuator Control Function: Normally closed (NC), orientation 9 to flow direction Sealing: Encapsulated circumferential PTFE Sealing

4 Type 8, Actuator Type Features Central thread for mounting accessories and system components Actuator Type With anti-twist and guided safeguard and controlled piston Namur-flange Sealing Control connection for Cf. NO and DA and direct mounting Pilot Solenoid valve Control connection for Cf. NC and DA and direct mounting Pilot Solenoid valve Valve Body Material Self adjusting sealing gland packing Flow above the seat (see adjoining, colored table) Actuator Control Function (NC) Size Valve Body End Connection Flow below the seat (see adjoining, colored table)

5 Technical Data Operating Conditions Operating Medium: Neutral, agressive, gaseous, and liquid media. Media must be compatible with the materials of construction. Viscosity: Max. mm /sec Medium Temperature: - to +8 C for PTFE sealing Working Pressure: See table Control Medium: Neutral gases, air Temperature Control Medium: Max. +8 C Working Temperature: - to +9 C Size: DN 8-8 Valve Body Material: See ordering key page Sealing: PTFE capsuled (NBR, FKM, EPDM on request) Actuator Material: See ordering key page Filling Volume: Actuator,,, dm Actuator /, dm Actuator, dm Kv-Value Water (m /h) Size 8 - Kv-Value actuator type code,, Kv-Value for all actuator types except code,,,,,,, Measuring at C, bar pressure at the valve input and the free outlet, measured at the valve body with threaded socket. Working Pressure for Valves with flow below the seat Actuator Type Code Type Ø Actuator Piston Control Function (Cf.) Control Pressure min. - max. (bar) Size 8-8 Working Pressure max. (bar) 8 Manually op. 8 Manually op. 8 (NC),-8 8 (NC),-8, 8/9 (NC),-8, 8 (NC),- 8 (NC),- 8 (NO) page 8 (NO) page 8 (NO) page 8 8 (NO) page 9 8 (DA) page 8 (DA) page 8 (DA) page 8 8 (DA) page 9 Working Pressure for Valves with flow above the seat (suitable to only a limited extent for liquid media, there is a danger of waterhammer) Actuator Type Code Type Ø Actuator Piston Control Function (Cf.) Control Pressure min. - max. (bar) Size 8-8 Working Pressure max. (bar) 8 (NC) page 8 (NC) page 8 All pressures are gauge pressures.

6 Type 8, Actuator G / Mx G / SW Butt Weld End [mm] Valve Body Material Investment Cast. (Code ) Connection Code s 9 DIN 8 ASTM 9 ISO Series Series ASME BPE ød DN ød s ød s ød s ød s ,, (Clampversion ), ,, - - Weight, kg, preferential standards in bold Actuator (NO), flow below the seat Actuator (DA), flow below the seat Control pressure (bar) DN 8- Control pressure (bar) DN 8- Working pressure normally closed (Cf. ), flow below the seat as well as Working terms, see table page. All pressures are gauge pressures.

7 V Angle Seat Valves Type 8, Actuator and Actuator G / Mx SW G / Actuator (NO), flow below the seat Measurement and weight table Actuator type and 8 DN DN DN SW V Total weight ca. (kg) Control pressure (bar) DN,8,, Valve body types see page - Control equipment and accessories see page Actuator (DA), flow below the seat Actuator (NC), flow above the seat Control pressure (bar) 8 DN DN DN Control pressure (bar) 8 DN DN DN Working pressure normally closed (Cf. ), flow below the seat as well as Working terms, see table page. All pressures are gauge pressures.

8 Type 8, Actuator and Actuator Mx Namur-Flange The threaded bushing.8. for the valve mounting necessary is available on request. G / G / SW V 8 Actuator (NO), flow below the seat Control pressure (bar) Control pressure (bar) DN DN Actuator (DA), flow below the seat DN DN DN DN DN DN DN DN DN DN 8 DN SW V,,, 9, 8, 9, Valve body types see page - Control equipment and accessories see page Actuator (NC), flow above the seat Control pressure (bar) Measurement and weight table Actuator type and Total weight ca. (kg) 8 DN DN DN DN DN DN Working pressure normally closed (Cf. ), flow below the seat as well as Working terms, see table page. All pressures are gauge pressures. 8

9 V Angle Seat Valves Type 8, Actuator ø Mx G / SW Measurement and weight table Actuator type DN SW V Total weight ca. (kg),9,,,,9 8,8 8 8,8 Valve body types see page - Control equipment and accessories see page Actuator (NO), flow below the seat Actuator (DA), flow below the seat DN 8 DN DN 8 DN Control pressure (bar) DN DN Control pressure (bar) DN DN Working pressure normally closed (Cf. ), flow below the seat as well as Working terms, see table page. All pressures are gauge pressures. 9

10 V Angle Seat Valves Type 9, Two Stage Actuator Mx Cap.. optional SW 8 G / G / G / G / /-Way Angle Seat Valves with Two Stage Actuator The pneumatically controlled two stage piston actuator is made of two plastic actuators. The two stages can be independently actuated from each other. In order to open the valve completely with the full flowrate, the lower piston has to be actuated. Limited opening or flowrate is possible by actuating the upper piston. An adjustable stroke limiter allows to adjust the linear movement of the upper position. An optical indicator which is directly connected with the valve spindle shows the stroke. The control function of the valve is normally closed (Cf.). Application The valve is mainly used for filling with controlled filling of a tank, container or barrel. For filling, the valve is completely opened with the full flow rate. At the end of the filling cycle, the valve automatically reduces to the second stage of filling with a reduced flow rate for an accurate finish fill. Type 9 Two Stage Valve DN - Measurement and weight table Actuator type DN SW V Total weight ca. (kg),9 8,, 9,9 Valve body types see page - Control equipment and accessories see page Working pressure normally closed (Cf. ), flow below the seat as well as Working terms, see table page. All pressures are gauge pressures.

11 V Angle Seat Valves Type 8, Manually operated Spindle sealing with self adjusting gland packing Ø8 Advantages: Hygenic design, easy cleaning High temperature resistance Minimized dead leg design Optical position indicator Easy maintenance Good regulation properties Clean and smooth exterior for sterile washdowns Measurement and weight table DN V Total weight ca. (kg),,,,,8, Valve body types see page - Control equipment and accessories see page Working pressure normally closed (Cf. ), flow below the seat as well as Working terms, see table page. All pressures are gauge pressures.

12 V Angle Seat Valves Type 8, Manually operated Spindle sealing with stainless steel below SW Ø9 Advantages: Hygenic design, easy cleaning High temperature resistance Stainless steel below Minimized dead leg design Optical position indicator Easy maintenance Good regulation properties Clean and smooth exterior for sterile washdowns Measurement and weight table DN SW V Total weight ca. (kg),8 8,9, 8,9 89, 9, Valve body types see page - Control equipment and accessories see page Specific application: Pure or clean steam and gaseous media Working pressure normally closed (Cf. ), flow below the seat as well as Working terms, see table page. All pressures are gauge pressures.

13 Valve Body Threaded Socket and Butt Weld End ød s G NPT t t N SW B G L G Threaded Socket, Connection Code (DIN ISO 8) & N (NPT), Valve Body Material.8 (Code ) DIN ISO 8, Code NPT, Code N DN L G B G G t NPT t N SW G /, NPT / -kt 8 G /, NPT / -kt 9 G, NPT 9 -kt G /, n.a. n.a. 8-kt G /, NPT / 8-kt G 8, NPT 8-kt 9 G /, NPT / 8 8-kt Measurements in mm, G-Thread B S L S/L SK Butt Weld End, Valve Body Material./L (Code ) DIN 8 SMS ASTM 9 ISO Series Series Connection Code 8 ASME BPE 9 DN L SK L S B S ød s ød s ød s ød s ød s, ,,, 8 9, - -,,,, 8 9, - - 9,,,9, 8, 8 9,,,,, 8, ,, 8, 8,, 8, 8,,,8,, ,,,,, ,,,, - - L SK = preferred standard for ISO Code K, other lengths on request, B S valid for L S Measurements in mm, preferential standards in bold

14 Valve Body Clamp Socket and Flange ød ød B C L C Clamp Socket, Valve Body Material./L (Code ) Clamp End ident. Tube End ident. Connection-Code Similar ISO 8 DIN ASME BPE ISO DIN 8 ASME BPE DN NPS L C B C øb øb øb øb øb øb / 8 8,, 9, /,,, 9,,,,, / 8, 8,, - - /, 8,,8,,,, / 9 -, 9 9,, ,9 9 Measurements in mm, NPS inch ød øk ød B F L F Flange, Connection Code, Valve Body Material.8 (Code ) DN L F B F ød ød øk number of drilling Measurements in mm

15 Accessories and System Components Manual Adjustments Optical Indication. Optical position indicator. Stroke limiter. Stroke limiter with optical position indicator. Manual override with optical position indicator. Manual override with hand wheel Electrical Switch Boxes Manual Adjustments Pilot Control.-. Control head switch with optical indicator.89 AS-Interface.9-.9 Control head switch.9 Limit switch, open position. Contact - Free Limit Switch for & valve positions Optional with stainless steel housing Type - DN, /-way Solenoid Valve with hollow screw for single mounting Type - DN, /-way Solenoid Valve with hollow screw for single mounting Type - DN, /-way Solenoid valve for serial mounting Type - DN, /-way Solenoid valve for serial mounting.. Electropneumatic positioner - ma for pneumatically actuated valves with single or double acting actuator Operating voltage V Central mounted and also for retrofitting microprocessor controlled electronics for signal processing, actual/setpoint optional as process controller with PID qualities. Other positioners upon request.

16 SED Flow Control GmbH Am Schafbaum D-9 Bad Rappenau P.O. Box D-9 Bad Rappenau Tel +9() 9 Fax +9() 9 info@sed-flowcontrol.com TD9 Rev. c, Subject to alteration