MAXCOM PRODUCT SPECIFICATIONS FIBER OPTIC VIDEO / AUDIO / ASI LINK. Model MX3257HD. Description. Features. Model Selection Guide
|
|
|
- Paula Nash
- 7 years ago
- Views:
Transcription
1 MAXCOM PRODUCT SPECIFICATIONS FIBER OPTIC VIDEO / AUDIO / ASI LINK Model MX3257HD Description The rack-mountable MX3257HD fiber optic video multiplexer is ideal for transmitting 1 channel of video, 2 channels of audio and 1 high speed serial data channel on one fiber optic cable. The high speed serial data channel may be either DVB- ASI or SMPTE-310M. The MX3257HD s High Speed Serial data channel employs automatic cable equalization for error free operation over long coaxial cable runs. The MX3257HD operates by digitizing and multiplexing video, audio and high speed data onto a high-speed serial data stream, which is then transmitted via fiber optics. Features Because the system employs digital transmission techniques, performance characteristics are consistent and maintained over the specified distance with no degradation of signal. The MX3257HD is designed to work with standard singlemode or multimode fiber optic cable and can be wall mounted or rack mounted. Both transmitter and receiver come equipped with internal power supplies. Optical Link LEDs facilitate the continuous monitoring of the fiber optic system. High Quality 10 Bit Digital Sampling of Video Input High Speed Data Channel for DVB-ASI or SMPTE-310M High Speed Data Channel employs Automatic Cable Equalization Digital Transmission of Stereo Audio Baseband Video or composite Video/Audio Transmission over video channel External Audio Compatible with Balanced or Unbalanced Audio Formats High Quality Uncompressed Digital Transmission 67 db SNR Model Selection uide Model MX3257HDT-1S-1V-2A-ASI-SCA-40 MX3257HDR-1S-1V-2A-ASI-SCA-40 MX3257HDT-1S-1V-2A-S310-SCA-40 MX3257HDR-1S-1V-2A-S310-SCA-40 MX3257HDT-1S-1V-2A-ASI-SCA-80 MX3257HDR-1S-1V-2A-ASI-SCA-80 MX3257HDT-1S-1V-2A-S310-SCA-80 MX3257HDR-1S-1V-2A-S310-SCA-80 Description Fiber Optic Mux TX, 1 Video, 2 Audio, 1 DVB-ASI, Singlemode, SC/APC Connector, 40 Km Fiber Optic Mux RX, 1 Video, 2 Audio, 1 DVB-ASI, Singlemode, SC/APC Connector, 40 Km Fiber Optic Mux TX, 1 Video, 2 Audio, 1 SMPTE-310, Singlemode, SC/APC Connector, 40 Km Fiber Optic Mux RX, 1 Video, 2 Audio, 1 SMPTE-310, Singlemode, SC/APC Connector, 40 Km Fiber Optic Mux TX, 1 Video, 2 Audio, 1 DVB-ASI, Singlemode, SC/APC Connector, 80 Km Fiber Optic Mux RX, 1 Video, 2 Audio, 1 DVB-ASI, Singlemode, SC/APC Connector, 80 Km Fiber Optic Mux TX, 1 Video, 2 Audio, 1 SMPTE-310, Singlemode, SC/APC Connector, 80 Km Fiber Optic Mux RX, 1 Video, 2 Audio, 1 SMPTE-310, Singlemode, SC/APC Connector, 80 Km Other Connectors and Distances Available Upon Request
2 OPTICS Rear Panel Video Audio Audio SC VAC Hz Video I/O: BNC, 75 Ohm Stereo Audio Terminal Block, 10K Ohm High Speed Data Channel: BNC, 75 Ohm - DVB-ASI (270Mbps Transport) AC Power Input Optical I/O SC/PC or SC/APC Standards Channels Video Bandwidth SNR / dp / d Video I/O High Speed Data Stereo Audio I/O NTSC, PAL, SECAM (1) Video, (2) Audio & (1) High Speed Data 10 Hz to 6.5MHz 67 db, < 1 deg / < 1% BNC, 1V p-p, 75 Ohm BNC, 1V p-p, 75 Ohm 270Mbps, 19.4 Mbps Terminal Block, 1Vp-p, 10 KOhm Physical Dimensions 17 x 1.75 x 10 Environment Temperature: Operating: 0C to 50C Storage: -20C to 70C Humidity: Operating: 10% to 90% RH Storage: 5% to 90% RH Input Power Requirements: Voltage: VAC, Hz Package Includes Transmitter or Receiver (Must be purchased separately Power Cord Rack-mountable hardware Easy to follow owner's manual Warranty 5 year limited warranty 2248 Meridian Ste H Minden, Nv
3 User s Manual MAX3257HD Series Model: MAX3257/4A/3HD 1 VIDEO / 4 AUDIO / 3 DVB-ASI CWDM multiplexer Video / Audio / ASI Fiber Optic Multiplexing System Installation and User uide
4 TABLE OF CONTENTS 1 SAFETY INSTRUCTIONS 2 INTRODUCTION 2.1 System Description 2.2 Front Panel Indicator Description 2.3 Rear Panel Indicator Description 3 INSTALLATION 3.1 eneral Installation 3.2 Power Connection 3.3 Fiber Optic Cables Connection 3.4 Video Connections 3.5 Audio Connections 3.6 Balanced Audio Connections 3.7 Unbalanced Audio Connections 3.8 External Audio Sub-Carrier Connections 3.9 DVB-ASI Connections 4 OPERATION Page 2
5 1 SAFETY INSTRUCTIONS THE 3257 SYSTEM MAY CONTAIN A CLASS IIIb LASER. PLEASE OBSERVE THE FOLLOWIN SAFETY PRECAUTIONS THAT APPLY TO LASER EQUIPPED UNITS. WARNIN: Do not disconnect the fiber optic external connector with the power turned on. Exposure to Class IIIb Laser radiation is possible when the external fiber connector is disconnected while the unit is still powered up. Ensure the rubber boot is in place whenever the fiber optic cable is disconnected. CAUTION: Attempting to make adjustments or performing operations other than those specified may result in hazardous radiation exposure. Exposure for only seconds can cause permanent eye damage as well as other injuries. Page 3
6 2 INTRODUCTION 2.1 System Description The 3257 HD Series is a Video / Audio / DVB-ASI fiber optic multiplexer. The 3257 Series video modules can be configured to transmit simplex (one direction) or duplex (two direction) video & audio, and 1 to 4 DVB-ASI signals using CWDM technology. Depending on the distance requirements between sites, the 3257s may be equipped to operate over multimode or single mode fiber. Distances between the transmitter and receiver can be up to 3 Km for multimode operation and up to 120 Km for single mode operation. SYSTEM I/O CONFIURATION Each of the four ports can be configured for one of the following options: Simplex Video and Simplex Audio 2 Channels Simplex Video and Simplex Audio 4 Channels Simplex Video and Simplex Audio 6 Channels Simplex Video and Simplex Audio 8 Channels DVB-ASI 1 to 4 channels VIDEO / AUDIO TECHNOLOY: The 3257 system uses uncompressed 10 bit analog to digital modulation techniques which provides excellent video quality. The audio circuitry also digitizes the audio signals prior to transmission. The 2 channels of audio may be used for stereo audio or for two separate channels of audio. DVB-ASI Transmission Technology The ASI option on the 3257HD series will accept any PCM 1Vp-p, 75 ohm signal up to 600Mbps. The digital electrical signal connected to the BNC connector is converted to an optical signal. The ASI circuit s receiver takes the incoming optical signal and converts it back to electrical I/O: 75 Ohm up to 1Vp-p. The interface will NOT accept bipolar signals; such as T1, T3, E1 or E3. Page 4
7 2.2 Front Panel Indicators The following diagram depicts the front panel indicators: MAXCOM Pow er Status Link Power Indicator Link Indicator (light on): TX Transmitter status OK RX Optical link OK Link Indicator (light off): TX Problem with Transmitter RX Problem with Optical link Page 5
8 2.3 Rear Panel Indicators The following diagram depicts the 3257T and 3257R rear panel configuration with optional audio channels installed: NOTE: Model Depicted is configured with 1 Video 8 Audio and 4 ASI Channels Page 6
9 3 INSTALLATION 3.1 eneral Installation The units may be shelf mounted, 19 EIA rack mounted or table mounted. In order to mount the units in an 19 rack, the Rack Mount Brackets must be first installed by mounting the brackets to the mounting holes in the sides of the Make sure that there is enough space to pull and connect both the electrical data and optical cables without stressing them beyond the manufacturer s limitation strain specifications or exceeding the cable s minimum bend radius. 3.2 Power Connection The 3257 Series is compatible with VAC power, 47Hz 63Hz. The Power Entry Module incorporates an IEC 3 prong power input connector, a switch and a fuse holder, shown below: Fuse Holder Power Entry Module FUSE VAC Hz IEC 3 Prong Power Input On / Off Switch Page 7
10 3.3 Fiber optic cable connection Verify that the fiber cable meets the 3257 Series transmission requirements. Relevant cable specifications include loss, distance (dispersion) and return loss. Optical Specifications: For MX3257/2HD Service wavelength Tx Output Rx Receiver Loss in Fiber Power sensitivity Video +Audio 1310nm -5dbm -30dbm 0.35dbm/Km HD Ch nm -3dbm -24dbm 0.27dbm/km HD Ch nm -3bbm -24dbm 0.25dbm/km Optical Specifications: For MX3257/3HD Service wavelength Tx Output Rx Receiver Loss in Fiber Power sensitivity Video +Audio 1510nm -3dbm -24dbm 0.27dbm/Km HD Ch nm -3dbm -24dbm 0.26dbm/km HD Ch nm -3bbm -24dbm 0.25dbm/km HD Ch nm -3dbm -24dbm 0.26dbm/Km ] Page 8
11 3.4 Video Connections Video signals are sent over a 75 ohm coax cable terminated in a BNC connector (e.g. R 59U with a BNC connector) a. At the TX end (3257T), connect the video source to the VIDEO BNC connector. b. At the RX end (3257R), connect the VIDEO BNC to monitor. The output video level may be adjusted by using a small screwdriver to turn the screw above the output video connector, as shown below: Video Output Level Adjust (RX only) Video Audio Video INPUT/ OUTPUT Connector: 75 Ohm, BNC Page 9
12 3.5 Audio Connection The 3257 Models have either simplex or duplex audio. The 3257 supports both balanced audio and unbalanced audio. Accessing the audio I/O requires connecting to one or both channels of audio. The audio input and output impedance is 10Kohms. The Audio Terminal Block on the Video/Audio module provides the connectivity for transmitting and receiving audio. The illustrations below show how to connect balanced and unbalanced audio: 3.6 Balanced Audio (Differential) For Balanced audio connections, connect the audio + lead to the respective audio channel + input and the - lead to the audio channel - lead, as shown below. Video Audio Balanced Audio Input Audio Channel 1, 3, 5, 7 Connect round to TB Pin 1 Connect Input + to TB Pin 2 Connect Input to TB Pin 3 Audio Channel 2, 4, 6, 8 Connect Input + to TB Pin 4 Connect Input to TB Pin 5 Connect round to TB Pin 6 Balanced Audio Output Audio Channel 1, 3, 5, 7 Connect round to TB Pin 1 Connect Input + to TB Pin 2 Connect Input to TB Pin 3 Audio Channel 2, 4, 6, 8 Connect Input + to TB Pin 4 Connect Input to TB Pin 5 Connect round to TB Pin 6 Page 10
13 3.7 Unbalanced Audio (Single Ended) For Unbalanced audio connections, connect the audio I/O to the respective + and ND leads on the output audio connector, as shown below. Video Audio UnBalanced Audio Input Audio Channel 1, 3, 5, 7 Connect round to TB Pin 1 Connect Input + to TB Pin 2 UnBalanced Audio Output Audio Channel 1, 3, 5, 7 Connect round to TB Pin 1 Connect Input + to TB Pin 2 Audio Channel 2, 4, 6, 8 Connect Input + to TB Pin 4 Connect round to TB Pin 6 Audio Channel 2, 4, 6, 8 Connect Input + to TB Pin 4 Connect round to TB Pin 6 Note: Unbalanced Audio output will be 3dB less than input Note: DO NOT connect the (-) lead to ground on the audio OUTPUT as this may create noise on the ground, which may distort the video signals. Page 11
14 3.8 External 4.5Mhz Audio Sub-Carrier The 3257 Series also includes an option for transmitting video, audio and a 4.5Mhz audio subcarrier as an external signal. The figure below depicts the 3257 set up with video, 4 channels of baseband audio and an external audio sub-carrier channel. The audio sub-carrier channel uses a BNC connector with 75 ohm impedance. Video Audio Audio SC Video I/O BNC 75 Ohm Baseband Audio I/O External Audio Sub-Carrier I/O BNC Connector 75 Ohm Page 12
15 3.9 DVB-ASI Connections DVB-ASI signals are sent over a 75 ohm coax cable terminated in a BNC connector (e.g. R 59U with a BNC connector) The DVB-ASI I/O will accept ANY PCM signal from 1Mbps to 600Mbps that is less than 1Vp-p and is compatible with 75 ohm terminations. The DVB-ASI connection is NOT compatible with T-3 (DS3), T1 (DS1), or any bipolar Signal.Each HD transport stream is send on different CWDM optical wavelength Page 13
16 4 Operation Turn-On Procedure To operate the 3257 video transmission system: 1. Install the 3257 units to the appropriate power supply using the power entry module to provide power via an IEC 3 prong cable. 2. The indicator POWER on the front panel shows that the unit is properly powered. 3. Install the fiber optic cables to the Verify that the LINK lights are illuminated. This indicates that the unit has a good optical link. 5. Connect the Video and Audio Input and Output Signals Verify that video and audio is being received properly. Page 14
Instruction Manual RT-94845SL RR-94845SL Forty-Eight Channel Video Multiplexer With Bi-directional Ethernet Data
Instruction Manual RT-94845SL RR-94845SL Forty-Eight Channel Video Multiplexer With Bi-directional Ethernet Data Copyright 2007, American Fibertek, Inc. 0411JD Table of Contents Functional Description...3
Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers
Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers Analog Data Links Multi-Channel Contact Closures Multiplexers Digital Data Links - Contact Closures Power Supply
HDO700 P FIBRE OPTIC TRANSMITTER
Timo Rantanen 18.1.2011 1(5) HDO700 P FIBRE OPTIC TRANSMITTER HDO700 P is a high performance, extremely linear externally modulated 1550 nm transmitter for HDO fibre optic CATV link. This transmitter type
Extenders and Converters
easyport Multiport converter and extenders A practical solution to switch, transcode, convert and extend signals over copper or fiber optics PESA's easyport boxes are multi-format converters that provide
Product Information S N O. Portable VIP protection CCTV & Alarm System 2
Product Information S N O Portable VIP protection CCTV & Alarm System 2 G O V E R N M E N T A L S E C U R I T Y S O L U T I VIP KIT Rapid Deployment VIP Protection Kit The VIP KIT has been designed to
IRT Eurocard. Type DAX-3206. Audio Extractor for 270 Mb/s SDI
I R T Electronics Pty Ltd A.B.N. 35 000 832 575 26 Hotham Parade, ARTARMON N.S.W. 2064 AUSTRALIA National: Phone: (02) 9439 3744 Fax: (02) 9439 7439 International: 61 2 9439 3744 61 2 9439 7439 Email:
Model GS7000 4-Port Node 1 GHz with 40/52 MHz split
Model GS7000 4-Port Node 1 GHz with 40/52 MHz split The Model GS7000 4-Port Node is our latest generation 1 GHz optical node platform and utilizes a completely new housing designed for optimal heat dissipation.
FlexPoint T1/E1 Copper to Fiber Line Driver
BLACK BOX NETWORK SERVICES MT660A-MM MT661A-SM MT660A-MM-E MT661A-SM-E FlexPoint T1/E1 Copper to Fiber Line Driver CUSTOMER Order toll-free in the U.S.: Call 877-877-BBOX SUPPORT (outside U.S. call 724-746-5500)
LT-82 Stationary IR Transmitter
LT-82 Stationary IR Transmitter Configuration LT-82-0 (North America) LT-82-02 (Asia, UK) LT-82-03 (Euro) The Listen LT-82 is the heart of a stationary IR listening system. It takes the desired audio signal
Gigabit Switching Ethernet Media Converters - Product User Guide
Gigabit Switching Ethernet Media Converters - Product User Guide PL0338 Issue3 Introduction These Tyco Electronics Gigabit Media Converters translate between 1000Base-T copper and 1000Base-X fiber optic
F2400 FOM II Series Fiber Optic Modem Technical Manual
F2400 FOM II Series Fiber Optic Modem Technical Manual T1 Revision B Copyright April 2003 VERSITRON, Inc. 83 Albe Drive / Suite C Newark, DE 19702 www.versitron.com A030430283T PROPRIETARY DATA All data
SES-FA1 USER MANUAL. Sescom SES-FA1 2-Channel Line Level Audio Over Fiber Extender Kit
SES-FA1 USER MANUAL Sescom SES-FA1 2-Channel Line Level Audio Over Fiber Extender Kit Sescom SES-FA1 2-Channel Line Level Audio Over Fiber Extender Kit Perfect for many types of studios, broadcasting,
Mini-HDMI Series MINIATURE MULTIMODE FIBER OPTIC HDMI TRANSMISSION SYSTEM
Mini-HDMI Series MINIATURE MULTIMODE FIBER OPTIC HDMI TRANSMISSION SYSTEM BCI reserves the right to make changes to the products described herein without prior notice or consent. No liability is assumed
SATELLITE TV on fiber
FSS-95F11T-out SATELLITE TV on fiber Long Distances without loss Prevent Ground Loops Lightning Protection long Distances without loss SATfiber Use fiber when DISH-to-Receiver Distance is over 300ft Place
Loop-O9310 4E1 or 4T1 Fiber Optical Mux
Loop-O930 E or T Fiber Optical Mux Features CPU Version Up to E or T links on one fiber Optical + protection 0/00 BaseT Ethernet Bridge mode, maximum transmission bandwidth 22Mbps (optional) One V.35,
Optimux-45, Optimux-45L Multiplexers for 21E1/28T1 over Fiber or T3
Data Sheet Optimux-45, Optimux-45L Up to 28 T1 or 21 E1 channels multiplexed into a single 45 Mbps data stream Any Traffic over Fiber Combination of T1 and E1 channels Transmission over coax or fiber optic
DVI Extender via 4 fiber channel LC Duplex Connector Extends DVI connection up to 500 meters
Description DVI (Digital Visual Interface) recently becomes an popular interface between monitor and PC. Electrical signal limits the transmission length and quality. APAC DVI extender helps DVI to transmit
OPT-700 - SERIAL TO FIBER OPTIC CONVERTER
USER S MANUAL OPT-700 - SERIAL TO FIBER OPTIC CONVERTER JUL / 05 OPT-700 VERSION 1 TM FOUNDATION OPT700ME smar www.smar.com Specifications and information are subject to change without notice. Up-to-date
Light Link Series 2 LT1550. Laser Transmitter with Erbium Doped Fibre Amplifier. Description. Features
Description The Light Link Series 2 optical transmitter model employs a high performance thermally stabilised, DFB, low-chirp, isolated laser to transmit CATV signals. Operating on a specific optical wavelength
Loop-O9310 4E1 or 4T1 Fiber Optical Mux
Loop-O930 E or T Fiber Optical Mux Features Up to E or T links on one fiber Optical + protection 0/00 BaseT Ethernet Bridge mode, maximum transmission bandwidth 22Mbps (optional) One V.35, X.2, RS9/V.36,
SOLUTIONS FOR AN EVOLVING WORLD. T1/E1 and C37.94. Fiber Service Units
SOLUTIONS FOR AN EVOLVING WORLD T1/E1 and C37.94 Fiber Service Units T1/E1 & C37.94 1 April 2013 Your world is changing and so are we. At RFL, we know your needs change much faster than your infrastructure.
Loop-O9310 4E1 or 4T1 Fiber Optical Mux
Loop- E or T Fiber Optical Mux Description Features CPU Version Non-CPU Version Up to E or T links on one fiber Optical + protection 0/00 BaseT Ethernet Bridge mode, maximum transmission bandwidth 22Mbps
FOMi-E3, FOMi-T3 E3, T3, and HSSI Manageable Fiber Optic Modems
Data Sheet FOMi-E3, FOMi-T3 Extend the range of E3, T3 or HSSI services over fiber optic cables up to 110 km (68 miles) Transparently transmit E3, T3 or HSSI signals over multimode and single-mode fiber
SECTION 28 23 23 VIDEO SURVEILLANCE SYSTEMS INFRASTRUCTURE
PART 1 - GENERAL 1.1 SUMMARY SECTION 28 23 23 VIDEO SURVEILLANCE SYSTEMS INFRASTRUCTURE A. Section Includes 1. Video Surveillance Systems Infrastructure B. Related Sections 1. Section [28 23 16 Video Surveillance
Product Information D23m Digital I/O System
Product Information D23m Digital I/O System 1-11 Contents 1 SUMMARY PRODUCT DESCRIPTION... 3 2 OVERVIEW... 4 3 SYNC/CLOCKING... 5 4 ETHERNET AND CONTROL... 5 5 POWER AND STATUS... 6 5.1 POWER SUPPLY AND
DVI Extender via 4 fiber channel LC Duplex Connector Extends DVI connection up to 500 meters
Description DVI (Digital Visual Interface) recently becomes an popular interface between monitor and PC. Electrical signal limits the transmission length and quality. APAC DVI extender helps DVI to transmit
TACTICAL FIBER OPTIC MODEMS U.S. Army and ANSI Standards
This data sheet contains controlled technical data that has been cleared for public release by the U.S. Government under ITAR Exemption 22CFR 125.4(b)(13). TACTICAL FIBER OPTIC MODEMS U.S. Army and ANSI
MANUAL PC1000R INFO@APART-AUDIO.COM
MANUAL PC1000R INFO@APART-AUDIO.COM Features The APart PC1000R is a professional multisource CD/USB/SD card music player, equipped with balanced and unbalanced analog outputs, coaxial and optical digital
Características. Starligh SA 9 de julio 1595 Córdoba Argentina - 0351-4809210 / 4119600
Balun Activo - BALUN_ACT Características Single Channel Active Video Transmitter Full-motion color video signal up to 3900ft(1200m) via UTP cat5e/6 NTSC, PAL & SECAM video format compatible Real-time transmission
Displayport Extender via 2 multimode fibers LC Duplex Connector Extends Displayport Link up to 200 meters
Description Displayport combines the audio and video through an interface. It supports high resolution displays and multiple displays with a single cable, and increases the efficiency and bandwidth of
IRT Eurocard. Types DAX-3200
I R T Electronics Pty Ltd A.B.N. 35 000 832 575 26 Hotham Parade, ARTARMON N.S.W. 2064 AUSTRALIA National: Phone: (02) 9489 3744 Fax: (02) 9439 7439 International: +61 2 9439 3744 +61 2 9439 7439 Email:
KOM200. Industrial Serial to Fiber Media Converter. User s Manual
KOM200 s Manual 200911 KOM200 Industrial Serial to Fiber Media Converter s Manual KYLAND Technology Co., Ltd. 1 KOM200 s Manual 200911 Table of contents CHAPTER 1: PRODUCT OVERVIEW---------------- 3 CHAPTER
Perle Fast Fiber to Fiber. Media Converters
Perle Fast Fiber to Fiber Media Converters Installation Guide S-100MM-XXXXX P/N 5500312-10 (Rev A) Overview This document contains instructions necessary for the installation and operation of the Perle
FOM-5A, 6A. Asynchronous Fiber Optic Modem
FOM-5A, 6A Asynchronous Fiber Optic Modem FEATURES Asynchronous transmission at up to 19.2 kbps Transmission range up to 3 km (1.8 mi), regardless of data rate Full- or half-duplex Transfers one control
LwLVision-USB 2.0. Installation Guide
LwLVision-USB 2.0 Installation Guide About this manual This manual has been carefully compiled and examined to the state-of-the-art. G&D neither explicitly nor implicitly takes guarantee or responsibility
************* OWNER'S MANUAL BAMF800/2 BAMF1250/2 BAMF1800/2 BAMF2200/2 BAMF2600/2 BAMF1200/4 BAMF1600/4 BAMF2000/1D BAMF4000/1D BAMF5500/1D
************* OWNER'S MANUAL BAMF800/2 BAMF1250/2 BAMF1800/2 BAMF2200/2 BAMF2600/2 BAMF1200/4 BAMF1600/4 BAMF2000/1D BAMF4000/1D BAMF5500/1D INTRODUCTION Power Acoustik amplifiers provide high-performance
Perle 10/100 Ethernet Media Converters
Perle 10/100 Ethernet Media Converters Installation Guide S-110-XXXXXX S-110-XXXXXX-XT P/N 5500302-16 (Rev B) Overview This document contains instructions necessary for the installation and operation of
2-Pair HDSL1 Adtran Fiber Optic Link System
ISSUE 2 June 01, 2004 Data Sheet #37 2-Pair HDSL1 Adtran Fiber Optic Link System Contents 1. General. 1 2. Application... 2 3. Housings.. 2 4. Installation 3 5. Provisioning. 5 6. LED Indicators. 6 7.
10Gb/s SFP+ LRM 1310nm FP with PIN Receiver 220meters transmission distance
Feature 10Gb/s serial optical interface compliant to 802.3aq 10GBASE-LRM Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module SFP+
Attaching the PA-A1-ATM Interface Cables
CHAPTER 4 Attaching the PA-A1-ATM Interface Cables To continue your PA-A1-ATM port adapter installation, you must attach the port adapter cables. The instructions that follow apply to all supported platforms.
10Gbps XFP Bi-Directional Transceiver, 10km Reach 1270/1330nm TX / 1330/1270 nm RX
Features 10Gbps XFP Bi-Directional Transceiver, 10km Reach 1270/1330nm TX / 1330/1270 nm RX Supports 9.95Gb/s to 10.5Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km with SMF 1270/1330nm
LOXONE 12 Channel Amplifier
LOXONE 12 Channel Amplifier Item no.: 200110 Thank you for purchasing the Loxone Twelve Channel Amplifier. The versatility of the Amplifier makes it the perfect choice for almost every type of custom multi-room
Perle Gigabit Fiber to Fiber Media Converters
Perle Gigabit Fiber to Fiber Media Converters Installation Guide S-1000MM-XXXXXX P/N 5500314-10 Overview This document contains instructions necessary for the installation and operation of the Perle Gigabit
T3 Mux M13 Multiplexer
T3 Mux M13 Multiplexer User Manual [Type the abstract of the document here. The abstract is typically a short summary of the contents of the document. Type the abstract of the document here. The abstract
FOSTCDR. Industrial Serial to Multimode Fiber Optic Converter PRODUCT INFORMATION B&B ELECTRONICS. Specifications Serial Technology
FOSTCDR pn 8684R1 FOSTCDR-0812ds page 1/5 Industrial Serial to Multimode Fiber Optic Converter Data Rates up to 115.2 kbps 2.5 Mile (4 km) Range 10 to 30 VDC Input Voltage Wide Operating Temperature 2000V
Auxiliary equipment for communication with the EuroProt protective devices
Auxiliary equipment for communication with the EuroProt protective devices RS232 cable This cable is used to connect the RS232 connector located on the front panel of the EuroProt devices to the 9 pin
MISE - STEREO ENCODER
MISE - STEREO ENCODER 1. FRONT PANEL CONTROLS and INDICATORS AUDIO LEVEL F1 F2 F3 F4 OVER- MOD F5 F1:AUDIO LEVEL Control The setting of this screwdriver adjustment determines the audio input signal level.
BLACK BOX Scalable matrix KVM switch supports up to 1024 ports with fiber or copper cable.
ServSwitch DKM DVI-D KVM Matrix Switch Delivers instant switching in four different modes for data center, control room, and classroom settings. BLACK BOX Scalable matrix KVM switch supports up to 1024
EV-1000 Series DVR. Quick Operation Guide. Version 1.0.0
EV-1000 Series DVR Quick Operation Guide Version 1.0.0 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to
INTRODUCTION TO COMMUNICATION SYSTEMS AND TRANSMISSION MEDIA
COMM.ENG INTRODUCTION TO COMMUNICATION SYSTEMS AND TRANSMISSION MEDIA 9/6/2014 LECTURES 1 Objectives To give a background on Communication system components and channels (media) A distinction between analogue
CISCO DWDM XENPAK. Main features of the Cisco DWDM XENPAK include:
DATA SHEET CISCO DWDM XENPAK OVERVIEW The Cisco Dense Wavelength-Division Multiplexing (DWDM) XENPAK pluggable allows enterprise companies and service providers to provide scalable and easy-to-deploy 10
How To Connect A 10Gbps Sfp+ Bi-Directional Transceiver To A Single Mode Fiber With A Single Power Cell (Sfp+) To A Power Cell With A Power Source (Sf) (Sfl) (
Features 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX Supports 9.95Gb/s to 10.3Gb/s data rates Simplex LC Connector Bi-Directional SFP+ Optical Transceiver Single
NXU RoIP Link to Eliminate Voice-Grade Leased Line
NXU RoIP Link to Eliminate Voice-Grade Leased Line Purpose This Application Note will describe a method at which Network Extension Units (NXUs) can be utilized on an existing digital network to eliminate
Instruction Sheet ACS-101. General Description. Specifications. Amplified Broadband UHF Combiner-Splitter. Overall. Antenna Splitter.
ACS-101 Amplified Broadband UHF Combiner-Splitter General Description The ACS-101 (Antenna Combiner Splitter 10 to 1) is an amplified and filtered broadband splitter-combiner. It allows up to 10 base stations
USER GUIDE. 2 Channel POTS Mux DIN Fiber Link System. Introduction SYSTEM INSTALLATION INFORMATION. The leader in rugged fiber optic technology.
The leader in rugged fiber optic technology. USER GUIDE! Lifetime Warranty U-04 015A-01 Channel POTS Mux DIN Fiber Link System SYSTEM INSTALLATION INFORMATION Introduction The Channel POTS Mux DIN Fiber
Stand Alone POTS Fiber Optic System. P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit. Description & Installation
Stand Alone POTS Fiber Optic System P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit Description & Installation Printed in USA 09/11 TO466 Rev. A Table of Contents Page 1.0 SCOPE 2 2.0 PRODUCT
Perle Protocol Transparent Media Converter Modules
Perle Protocol Transparent Media Converter Modules Installation Guide C-4GPT-DSFP CM-4GPT-DSFP Part# 5500335-10 Overview This document contains instructions necessary for the installation and operation
HDMI/DVI to VGA/Component & Audio Break out Converter
HDMI/DVI to VGA/Component & Audio Break out Converter User Manual (HCV VA) All information is subject to change without notice. All names & trademarks are property of their respective owners. Rev.1002
Designing Fiber Optic Systems David Strachan
Designing Fiber Optic Systems David Strachan Everyone knows that fiber optics can carry a huge amount of data. There are more benefits to using fiber optics in broadcast applications than you might realize.
SO-CFP-ER-DWDM. CFP, 103/112 Gbps, DWDM tunable, SM, DDM, 20km SO-CFP-ER4-DWDM OVERVIEW PRODUCT FEATURES APPLICATIONS ORDERING INFORMATION
SO-CFP-ER4-DWDM CFP, 103/112 Gbps, DWDM tunable, SM, DDM, 20 km SO-CFP-ER4-DWDM OVERVIEW The SO-CFP-ER4-DWDM is a 100G transceiver module supporting 100GBASE-LR4 and OTU4 applications over singlemode (SM)
USER MANUAL MODEL 2300M SERIES. OpticLink Ethernet Media Converters (2300M, 2310M, 2311M, & 2312M)
USER MANUAL MODEL 2300M SERIES OpticLink Ethernet Media Converters (2300M, 2310M, 2311M, & 2312M) An ISO-9001 Certified Company Part# 07M2300M Doc# 077321U Rev. A Revised 4/14/03 SALES OFFICE (301) 975-1000
Application. Benefits. Contact us. Solution for Indoor TETRA coverage. TETRA/TETRAPOL Repeater RF/OF High Power. To ensure TETRA coverage everywhere
Application TETRA / TETRAPOL coverage enhancement Safety networks Railway, road and waterway tunnels The manufacturer retains the right to modify its products This document is not contractual. AIR Repeater
XFP Optical Receiver, 80km Reach
Features Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 80km with SMF APD ROSA receiver XFP MSA package with duplex LC connector No reference clock required
HP UPS R1500 Generation 3
HP UPS R1500 Generation 3 Installation Instructions Part Number 650952-001 NOTE: The rating label on the device provides the class (A or B) of the equipment. Class B devices have a Federal Communications
PS4-24 OWNERS MANUAL 24 VAC 90 WATT WALL MOUNTED CCTV POWER SUPPLY
PS4-24 OWNERS MANUAL 24 VAC 90 WATT WALL MOUNTED CCTV POWER SUPPLY 7320 Ashcroft, Suite 104 Houston, Texas 77081 p: 713-772-1404 f: 713-772-7360 e: info@juicegoose.com www.juicegoose.com 06-06 CONGRATULATIONS
DENSITÉ SERIES XVP-3901
up down cross Simultaneous 3G/HD & SD outputs audio fiber Rethink what s possible with one card DENSITÉ SERIES XVP-3901 3Gbps/hd/sd UNIVERSAL video & audio processor DENSITÉ SERIES XVP-3901 3Gbps/HD/SD
VIEW. SLX300 SpeakerLinX IP Zone. Amplifier Installation and Setup Guide. AVoIP
VIEW SLX300 SpeakerLinX IP Zone Amplifier Installation and Setup Guide TM AVoIP ClearOne 5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116 Telephone 1.800.283.5936 1.801.974.3760 Tech Sales 1.800.705.2103
RC001-4/RC002-4 (REV.B) 4-slot rack mounted chassis User manual
RC001-4/RC002-4 (REV.B) 4-slot rack mounted chassis User manual Raisecom Technologies July, 2006 Content 1. Cautions... 1 2. Overview... 2 3. Ordering information... 3 4. Parameters... 4 5. Mechanical
User's Guide. MADI Converter. 6 x Bidirectional MADI Optical to BNC Converter
User's Guide MADI Converter 6 x Bidirectional MADI Optical to BNC Converter 6 coaxial Inputs and Outputs 6 optical Inputs and Outputs 1 to 3 MIDI Distributor Contents 1 Introduction...3 2 Package Contents...3
Technical Note. HDTV-SDI Cabling Material Selection. HD-SDI Distribution : Introduction canare.com. Cabling Material Selection
HD-SDI Distribution : Introduction HD-SDI Distribution : Introduction canare.com HDTV-SDI Cabling Material Selection Broadcast stations and postproduction studios in many countries around the world are
Optimux-1553 Fiber Multiplexers for 3 E3/T3 over STM-1/OC-3
Where to buy > See the product page > Data Sheet Optimux-1553 STM-1/OC-3 terminal multiplexer for grooming high-order legacy traffic (TDM) over SDH/SONET networks Up to three E3 or T3 data channels multiplexed
TOTALLY SOLID STATE NON-DIRECTIONAL RADIO BEACONS 190-535 khz
TOTALLY SOLID STATE NON-DIRECTIONAL RADIO S 190-535 khz This family of radio transmitters has been developed as extremely efficient, highly reliable Non Directional Beacons. ND2000A/4000A» MODULAR CONSTRUCTION»
OPERATION MANUAL. VDA-106A Video Distribution Amplifier. 1 st Edition - Rev.1
OPERATION MANUAL VDA-106A Video Distribution Amplifier 1 st Edition - Rev.1 Precautions Important Safety Warnings [Power] Caution Operate unit only on the specified supply voltage. Disconnect power cord
Contents. Safety Warnings... 1
Contents Safety Warnings... 1 Unpacking the GQ600... 1 Introduction... 2 GQ600 Filter Characteristics... 2 1/3 Octave Centre Frequencies... 4 Front Panel Functions... 5 Rear Panel Functions... 6 Specifications...
INTRODUCTION. Please read this manual carefully for a through explanation of the Decimator ProRackG and its functions.
INTRODUCTION The Decimator ProRackG guitar noise reduction system defines a new standard for excellence in real time noise reduction performance. The Decimator ProRackG was designed to provide the maximum
Optimux-34, Optimux-25
Data Sheet Optimux-34, Optimux-25 Up to 16 E1/T1 links and high-speed data or Ethernet traffic multiplexed into fiber optic uplink E3 copper uplink for Optimux-34 Single-mode, multimode, single-mode over
Perle 10/100/1000 Ethernet Media Converter Module
Perle 10/100/1000 Ethernet Media Converter Module Installation Guide C-1110-XXXXX CM-1110-XXXXX C-1110-SFP CM-1110-SFP Unmanaged Module Managed Module Unmanaged Module Managed Module P/N 5500308-21 Overview
Preliminary. Audio & Video Matrix Switchers featuring eight multi-format inputs and built-in scalers
Preliminary Audio & Video Matrix Switchers featuring eight multi-format inputs and built-in scalers and digital and video converted and distributed to digital outputs Product Overview Inputs: 8 and 8 /Component/S-video/
RLH 2 Wire Digital Phone Fiber Link Card System
RLH Industries, Inc. The leader in rugged fiber optic technology. USER GUIDE! Unconditional Lifetime Warranty U-008 2014C-0924 RLH 2 Wire Digital Phone Fiber Link Card System CARD INSTALLATION INFORMATION
HD-SDI TRANSMISSION DEVICE
TRANSMISSION DEVICE [ + Power + Over Coax Cable] Transmitter Repeater Receiver Cable accessory [0.3 / 0.6 / 1M] DC48V Adaptor 1. SeeEyes Power + Data Transmission Device Introduction Overview SeeEyes Transmission
=============================== WARNING
=============================== WARNING EXPLANATION OF GRAPHICAL SYMBOLS This symbol is intended to alert the user to the presence of unprotected dangerous voltage" within the product's enclosure that
Megaplex-2100/2104 Modules ML-1/2E1/T1, MLF-1/2E1/T1
Data Sheet Megaplex-2100/2104 Modules ML-1/2E1/T1, MLF-1/2E1/T1 Copper or Fiber Optic Interface, Single/Dual E1/T1 Main Link Modules Connecting Megaplex-2100/2104 to various E1 and T1 services One or two
HP ProCurve High-Speed Transceivers Installation Guide
HP ProCurve High-Speed Transceivers Installation Guide Introduction The HP ProCurve High-Speed Transceivers can be installed into a number of HP ProCurve networking devices to provide 100 Mbps and 1000
10G CWDM Conversion Technology
10G CWDM Conversion Technology Simplifying Today s Challenges By Transition Networks Curt Carlson Product Manager curtc@transition.com com Agenda WDM Technology Overview What are the features/benefits
Cisco SFP Optics for Gigabit Ethernet Applications
Cisco SFP Optics for Gigabit Ethernet Applications The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit
www.vicon-security.com
Data/Spec Sheet 16-Channel Hybrid Digital Video Recorder Configured with ViconNet Video Management Software (VMS) Scalable from one to hundreds of recorders Support for HD video and Megapixel cameras Real-time
DTS/DRS-1000RV. Owner s Manual. DTS-1000RV: DVI/HDMI or VGA, Audio, RS-232C Transmitter Extender
DTS/DRS-1000RV Owner s Manual DTS-1000RV: DVI/HDMI or VGA, Audio, RS-232C Transmitter Extender DRS-1000RV: DVI/VGA or VGA, Audio, RS-232C Receiver Extender Dtrovision LLC 9A Bergen Turnpike Little Ferry,
8.5Gb/s SFP+ Fibre Channel Optical Transceiver
8.5Gb/s SFP+ Fibre Channel Optical Transceiver Features Up to 8.5Gb/s bi-directional data links Hot Pluggable SFP+ footprint Built-in digital diagnostic functions 1310nm FP laser transmitter Duplex LC
Optimux-1551 Fiber Multiplexer for 63E1/84T1 over STM-1/OC-3
Data Sheet Optimux-1551 STM-1 or OC-3 terminal multiplexer providing access to SDH and SONET networks Any Traffic over Fiber Multiplexes 21/42/63 E1 or 28/56/84 T1 data channels over a single link, providing
USER S MANUAL. Ethernet 10/100 Transceiver Series DL221/DL221A
USER S MANUAL Ethernet 10/100 Transceiver Series DL221/DL221A June 1999 ETHERNET 10/100 TRANSCEIVER INSTRUCTION MANUAL SERIES DL221/DL221A INTRODUCTION Thank you for purchasing the Radiant Communications
4UHD. SDX-8x8. Flexible and comprehensive professional Digital Modular Matrix (DMM) for Commercial, Education and Residential
SDX-8x8 Flexible and comprehensive professional Digital Modular Matrix (DMM) for Commercial, Education and Residential K 4UHD The Smart-e SDX-8x8 features The SDX-8x8 is a professional flexible Digital
INSTRUCTION MANUAL MODEL PCD-88
INSTRUCTION MANUAL MODEL PCD-88 CLOSED CAPTION DECODER LINK ELECTRONICS, INC. 2137 Rust Avenue Cape Girardeau, Missouri 63703 Phone: 573-334-4433 Fax: 573-334-9255 e-mail: sales @ linkelectronics.com website:
1.25Gbps GBIC Optical Transceiver, 20km Reach
1.25Gbps GBIC Optical Transceiver, 20km Reach Features Dual data-rate of 1.25Gbps/1.0625Gbps operation 1310nm FP laser and PIN photodetector for 20km transmission Duplex SC optical interface Standard serial
PAL to NTSC (NTSC to PAL) Converter with 19 inch Rack (CDM-640AR)
PAL to NTSC (NTSC to PAL) Converter with 19 inch Rack (CDM-640AR) Operation Manual Introduction This unit will convert NTSC/PAL or VGA input signal into NTSC/PAL or VGA output. It offers premium conversion
IVIS IVIS - Indoor Video Insertion System
IVIS IVIS - Indoor Video Insertion System Installation & Operation Manual Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice, to make amendments
Installation and Operation Manual Blackmagic Converters. Mac OS X Windows
Installation and Operation Manual Blackmagic Converters Mac OS X Windows October 2014 Welcome Thank you for purchasing Blackmagic Converters for your production needs. Blackmagic Mini Converters, Mini
HTT 101. HDMI/YPbPr/S-Video/AV to DVB-T. HDMI/YPbPr/S Encoder Modulator
HTT 101 HDMI/YPbPr/S-Video/AV to DVB-T HDMI/YPbPr/S DVB Encoder Modulator TABLE OF CONTENTS 1. SPECIFICATIONS... 3 1.1 Product Overview... 3 1.2 Appearance and Description... 3 1.3 System Diagram... 4
Fiber Optic Connectivity SECURITY SURVEILLANCE SOLUTIONS. ComNet Managed Ethernet Switches
ComNet Fiber Optic and Ethernet Transmission Equipment is setting the standard for value and performance. ComNet is a major provider of video, audio and data transmission, and network communication solutions
CISCO 10GBASE X2 MODULES
DATA SHEET CISCO 10GBASE X2 MODULES Figure 1. Cisco 10GBASE X2 and Xenpak Module PRODUCT OVERVIEW The Cisco 10GBASE X2 modules (Figure 1) offers customers a wide variety of 10 Gigabit Ethernet connectivity
USB 2.0 4-Port Extender Kit
USB 2.0 4-Port Extender Kit 500072 MuxLab Inc. 2014 94-000760-A / SE-000760-A Table of Contents 1. Introduction... 2 2. Features... 2 3. Specifications... 2 4. Package Contents... 3 5. Physical Diagram...